44. Endpoints

Actuator endpoints allow you to monitor and interact with your application. Spring Boot includes a number of built-in endpoints and you can also add your own. For example the health endpoint provides basic application health information.

The way that endpoints are exposed will depend on the type of technology that you choose. Most applications choose HTTP monitoring, where the ID of the endpoint is mapped to a URL. For example, by default, the health endpoint will be mapped to /health.

The following endpoints are available:

IDDescriptionSensitive

actuator

Provides a hypermedia-based “discovery page” for the other endpoints. Requires Spring HATEOAS to be on the classpath.

true

autoconfig

Displays an auto-configuration report showing all auto-configuration candidates and the reason why they ‘were’ or ‘were not’ applied.

true

beans

Displays a complete list of all the Spring beans in your application.

true

configprops

Displays a collated list of all @ConfigurationProperties.

true

dump

Performs a thread dump.

true

env

Exposes properties from Spring’s ConfigurableEnvironment.

true

flyway

Shows any Flyway database migrations that have been applied.

true

health

Shows application health information (when the application is secure, a simple ‘status’ when accessed over an unauthenticated connection or full message details when authenticated).

false

info

Displays arbitrary application info.

false

liquibase

Shows any Liquibase database migrations that have been applied.

true

logfile

Returns the contents of the logfile (if logging.file or logging.path properties have been set). Only available via MVC.

true

metrics

Shows ‘metrics’ information for the current application.

true

mappings

Displays a collated list of all @RequestMapping paths.

true

shutdown

Allows the application to be gracefully shutdown (not enabled by default).

true

trace

Displays trace information (by default the last few HTTP requests).

true

[Note]Note

Depending on how an endpoint is exposed, the sensitive property may be used as a security hint. For example, sensitive endpoints will require a username/password when they are accessed over HTTP (or simply disabled if web security is not enabled).

44.1 Customizing endpoints

Endpoints can be customized using Spring properties. You can change if an endpoint is enabled, if it is considered sensitive and even its id.

For example, here is an application.properties that changes the sensitivity and id of the beans endpoint and also enables shutdown.

endpoints.beans.id=springbeans
endpoints.beans.sensitive=false
endpoints.shutdown.enabled=true
[Note]Note

The prefix ‟endpoints + . + name” is used to uniquely identify the endpoint that is being configured.

By default, all endpoints except for shutdown are enabled. If you prefer to specifically “opt-in” endpoint enablement you can use the endpoints.enabled property. For example, the following will disable all endpoints except for info:

endpoints.enabled=false
endpoints.info.enabled=true

44.2 Hypermedia for actuator MVC endpoints

If Spring HATEOAS is on the classpath (e.g. through the spring-boot-starter-hateoas or if you are using Spring Data REST) then the HTTP endpoints from the Actuator are enhanced with hypermedia links, and a “discovery page” is added with links to all the endpoints. The “discovery page” is available on /actuator by default. It is implemented as an endpoint, allowing properties to be used to configure its path (endpoints.actuator.path) and whether or not it is enabled (endpoints.actuator.enabled).

When a custom management context path is configured, the “discovery page” will automatically move from /actuator to the root of the management context. For example, if the management context path is /management then the discovery page will be available from /management.

If the HAL Browser is on the classpath via its webjar (org.webjars:hal-browser), or via the spring-data-rest-hal-browser then an HTML “discovery page”, in the form of the HAL Browser, is also provided.

44.3 Adding custom endpoints

If you add a @Bean of type Endpoint then it will automatically be exposed over JMX and HTTP (if there is an server available). An HTTP endpoints can be customized further by creating a bean of type MvcEndpoint. Your MvcEndpoint is not a @Controller but it can use @RequestMapping (and @Managed*) to expose resources.

[Tip]Tip

If you are doing this as a library feature consider adding a configuration class to /META-INF/spring.factories under the key org.springframework.boot.actuate.autoconfigure.EndpointWebMvcConfiguration. If you do that then the endpoint will move to a child context with all the other MVC endpoints if your users ask for a separate management port or address. A configuration declared this way can be a WebConfigurerAdapter if it wants to add static resources (for instance) to the management endpoints.

44.4 Health information

Health information can be used to check the status of your running application. It is often used by monitoring software to alert someone if a production system goes down. The default information exposed by the health endpoint depends on how it is accessed. For an unauthenticated connection in a secure application a simple ‘status’ message is returned, and for an authenticated connection additional details are also displayed (see Section 45.6, “HTTP health endpoint access restrictions” for HTTP details).

Health information is collected from all HealthIndicator beans defined in your ApplicationContext. Spring Boot includes a number of auto-configured HealthIndicators and you can also write your own.

44.5 Security with HealthIndicators

Information returned by HealthIndicators is often somewhat sensitive in nature. For example, you probably don’t want to publish details of your database server to the world. For this reason, by default, only the health status is exposed over an unauthenticated HTTP connection. If you are happy for complete health information to always be exposed you can set endpoints.health.sensitive to false.

Health responses are also cached to prevent “denial of service” attacks. Use the endpoints.health.time-to-live property if you want to change the default cache period of 1000 milliseconds.

44.5.1 Auto-configured HealthIndicators

The following HealthIndicators are auto-configured by Spring Boot when appropriate:

NameDescription

DiskSpaceHealthIndicator

Checks for low disk space.

DataSourceHealthIndicator

Checks that a connection to DataSource can be obtained.

ElasticsearchHealthIndicator

Checks that an ElasticSearch cluster is up.

JmsHealthIndicator

Checks that a JMS broker is up.

MailHealthIndicator

Checks that a mail server is up.

MongoHealthIndicator

Checks that a Mongo database is up.

RabbitHealthIndicator

Checks that a Rabbit server is up.

RedisHealthIndicator

Checks that a Redis server is up.

SolrHealthIndicator

Checks that a Solr server is up.

[Tip]Tip

It is possible to disable them all using the management.health.defaults.enabled property.

44.5.2 Writing custom HealthIndicators

To provide custom health information you can register Spring beans that implement the HealthIndicator interface. You need to provide an implementation of the health() method and return a Health response. The Health response should include a status and can optionally include additional details to be displayed.

import org.springframework.boot.actuate.health.HealthIndicator;
import org.springframework.stereotype.Component;

@Component
public class MyHealth implements HealthIndicator {

    @Override
    public Health health() {
        int errorCode = check(); // perform some specific health check
        if (errorCode != 0) {
            return Health.down().withDetail("Error Code", errorCode).build();
        }
        return Health.up().build();
    }

}

In addition to Spring Boot’s predefined Status types, it is also possible for Health to return a custom Status that represents a new system state. In such cases a custom implementation of the HealthAggregator interface also needs to be provided, or the default implementation has to be configured using the management.health.status.order configuration property.

For example, assuming a new Status with code FATAL is being used in one of your HealthIndicator implementations. To configure the severity order add the following to your application properties:

management.health.status.order=DOWN, OUT_OF_SERVICE, UNKNOWN, UP

You might also want to register custom status mappings with the HealthMvcEndpoint if you access the health endpoint over HTTP. For example you could map FATAL to HttpStatus.SERVICE_UNAVAILABLE.

44.6 Custom application info information

You can customize the data exposed by the info endpoint by setting info.* Spring properties. All Environment properties under the info key will be automatically exposed. For example, you could add the following to your application.properties:

info.app.name=MyService
info.app.description=My awesome service
info.app.version=1.0.0

44.6.1 Automatically expand info properties at build time

Rather than hardcoding some properties that are also specified in your project’s build configuration, you can automatically expand info properties using the existing build configuration instead. This is possible in both Maven and Gradle.

Automatic property expansion using Maven

You can automatically expand info properties from the Maven project using resource filtering. If you use the spring-boot-starter-parent you can then refer to your Maven ‘project properties’ via @..@ placeholders, e.g.

project.artifactId=myproject
project.name=Demo
project.version=X.X.X.X
project.description=Demo project for info endpoint
info.build.artifact[email protected]@
info.build.name[email protected]@
info.build.description[email protected]@
info.build.version[email protected]@
[Note]Note

In the above example we used project.* to set some values to be used as fallbacks if the Maven resource filtering has not been switched on for some reason.

[Tip]Tip

The spring-boot:run maven goal adds src/main/resources directly to the classpath (for hot reloading purposes). This circumvents the resource filtering and this feature. You can use the exec:java goal instead or customize the plugin’s configuration, see the plugin usage page for more details.

If you don’t use the starter parent, in your pom.xml you need (inside the <build/> element):

<resources>
    <resource>
        <directory>src/main/resources</directory>
        <filtering>true</filtering>
    </resource>
</resources>

and (inside <plugins/>):

<plugin>
    <groupId>org.apache.maven.plugins</groupId>
    <artifactId>maven-resources-plugin</artifactId>
    <version>2.6</version>
    <configuration>
        <delimiters>
            <delimiter>@</delimiter>
        </delimiters>
    </configuration>
</plugin>

Automatic property expansion using Gradle

You can automatically expand info properties from the Gradle project by configuring the Java plugin’s processResources task to do so:

processResources {
    expand(project.properties)
}

You can then refer to your Gradle project’s properties via placeholders, e.g.

info.build.name=${name}
info.build.description=${description}
info.build.version=${version}
[Note]Note

Gradle’s expand method uses Groovy’s SimpleTemplateEngine which transforms ${..} tokens. The ${..} style conflicts with Spring’s own property placeholder mechanism. To use Spring property placeholders together with automatic expansion the Spring property placeholders need to be escaped like \${..}.

44.6.2 Git commit information

Another useful feature of the info endpoint is its ability to publish information about the state of your git source code repository when the project was built. If a git.properties file is contained in your jar the git.branch and git.commit properties will be loaded.

For Maven users the spring-boot-starter-parent POM includes a pre-configured plugin to generate a git.properties file. Simply add the following declaration to your POM:

<build>
    <plugins>
        <plugin>
            <groupId>pl.project13.maven</groupId>
            <artifactId>git-commit-id-plugin</artifactId>
        </plugin>
    </plugins>
</build>

A similar gradle-git plugin is also available for Gradle users, although a little more work is required to generate the properties file.