This API documentation describes Spring Boot Actuators web endpoints.

1. Overview

Before you proceed, you should read the following topics:

1.1. URLs

By default, all web endpoints are available beneath the path /actuator with URLs of the form /actuator/{id}. The /actuator base path can be configured by using the management.endpoints.web.base-path property, as shown in the following example:

management.endpoints.web.base-path=/manage

The preceding application.properties example changes the form of the endpoint URLs from /actuator/{id} to /manage/{id}. For example, the URL info endpoint would become /manage/info.

1.2. Timestamps

All timestamps that are consumed by the endpoints, either as query parameters or in the request body, must be formatted as an offset date and time as specified in ISO 8601.

2. Audit Events (auditevents)

The auditevents endpoint provides information about the application’s audit events.

2.1. Retrieving Audit Events

To retrieve the audit events, make a GET request to /actuator/auditevents, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/auditevents?principal=alice&after=2018-09-25T00%3A16%3A30.046Z&type=logout' -i -X GET

The preceding example retrieves logout events for the principal, alice, that occurred after 09:37 on 7 November 2017 in the UTC timezone. The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 121

{
  "events" : [ {
    "timestamp" : "2018-09-25T00:16:30.049Z",
    "principal" : "alice",
    "type" : "logout"
  } ]
}

2.1.1. Query Parameters

The endpoint uses query parameters to limit the events that it returns. The following table shows the supported query parameters:

Parameter Description

after

Restricts the events to those that occurred after the given time. Optional.

principal

Restricts the events to those with the given principal. Optional.

type

Restricts the events to those with the given type. Optional.

2.1.2. Response Structure

The response contains details of all of the audit events that matched the query. The following table describes the structure of the response:

Path Type Description

events

Array

An array of audit events.

events.[].timestamp

String

The timestamp of when the event occurred.

events.[].principal

String

The principal that triggered the event.

events.[].type

String

The type of the event.

3. Beans (beans)

The beans endpoint provides information about the application’s beans.

3.1. Retrieving the Beans

To retrieve the beans, make a GET request to /actuator/beans, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/beans' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 1128

{
  "contexts" : {
    "application" : {
      "beans" : {
        "defaultServletHandlerMapping" : {
          "aliases" : [ ],
          "scope" : "singleton",
          "type" : "org.springframework.web.servlet.HandlerMapping",
          "resource" : "class path resource [org/springframework/boot/autoconfigure/web/servlet/WebMvcAutoConfiguration$EnableWebMvcConfiguration.class]",
          "dependencies" : [ ]
        },
        "org.springframework.boot.autoconfigure.context.PropertyPlaceholderAutoConfiguration" : {
          "aliases" : [ ],
          "scope" : "singleton",
          "type" : "org.springframework.boot.autoconfigure.context.PropertyPlaceholderAutoConfiguration$$EnhancerBySpringCGLIB$$2b3de14a",
          "dependencies" : [ ]
        },
        "org.springframework.boot.autoconfigure.web.servlet.DispatcherServletAutoConfiguration" : {
          "aliases" : [ ],
          "scope" : "singleton",
          "type" : "org.springframework.boot.autoconfigure.web.servlet.DispatcherServletAutoConfiguration$$EnhancerBySpringCGLIB$$18e9c3ce",
          "dependencies" : [ ]
        }
      }
    }
  }
}

3.1.1. Response Structure

The response contains details of the application’s beans. The following table describes the structure of the response:

Path Type Description

contexts

Object

Application contexts keyed by id.

contexts.*.parentId

String

Id of the parent application context, if any.

contexts.*.beans

Object

Beans in the application context keyed by name.

contexts.*.beans.*.aliases

Array

Names of any aliases.

contexts.*.beans.*.scope

String

Scope of the bean.

contexts.*.beans.*.type

String

Fully qualified type of the bean.

contexts.*.beans.*.resource

String

Resource in which the bean was defined, if any.

contexts.*.beans.*.dependencies

Array

Names of any dependencies.

4. Caches (caches)

The caches endpoint provides access to the application’s caches.

4.1. Retrieving All Caches

To retrieve the application’s caches, make a GET request to /actuator/caches, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/caches' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 435

{
  "cacheManagers" : {
    "anotherCacheManager" : {
      "caches" : {
        "countries" : {
          "target" : "java.util.concurrent.ConcurrentHashMap"
        }
      }
    },
    "cacheManager" : {
      "caches" : {
        "cities" : {
          "target" : "java.util.concurrent.ConcurrentHashMap"
        },
        "countries" : {
          "target" : "java.util.concurrent.ConcurrentHashMap"
        }
      }
    }
  }
}

4.1.1. Response Structure

The response contains details of the application’s caches. The following table describes the structure of the response:

Path Type Description

cacheManagers

Object

Cache managers keyed by id.

cacheManagers.*.caches

Object

Caches in the application context keyed by name.

cacheManagers.*.caches.*.target

String

Fully qualified name of the native cache.

4.2. Retrieving Caches by Name

To retrieve a cache by name, make a GET request to /actuator/caches/{name}, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/caches/cities' -i -X GET

The preceding example retrieves information about the cache named cities. The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 113

{
  "target" : "java.util.concurrent.ConcurrentHashMap",
  "name" : "cities",
  "cacheManager" : "cacheManager"
}

4.2.1. Request Structure

If the requested name is specific enough to identify a single cache, no extra parameter is required. Otherwise, the cacheManager must be specified. The following table shows the supported query parameters:

Parameter Description

cacheManager

Name of the cacheManager to qualify the cache. May be omitted if the cache name is unique.

4.2.2. Response Structure

The response contains details of the requested cache. The following table describes the structure of the response:

Path Type Description

name

String

Cache name.

cacheManager

String

Cache manager name.

target

String

Fully qualified name of the native cache.

4.3. Evict All Caches

To clear all available caches, make a DELETE request to /actuator/caches as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/caches' -i -X DELETE

4.4. Evict a Cache by Name

To evict a particular cache, make a DELETE request to /actuator/caches/{name} as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/caches/countries?cacheManager=anotherCacheManager' -i -X DELETE
As there are two caches named countries, the cacheManager has to be provided to specify which Cache should be cleared.

4.4.1. Request Structure

If the requested name is specific enough to identify a single cache, no extra parameter is required. Otherwise, the cacheManager must be specified. The following table shows the supported query parameters:

Parameter Description

cacheManager

Name of the cacheManager to qualify the cache. May be omitted if the cache name is unique.

5. Conditions Evaluation Report (conditions)

The conditions endpoint provides information about the evaluation of conditions on configuration and auto-configuration classes.

5.1. Retrieving the Report

To retrieve the report, make a GET request to /actuator/conditions, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/conditions' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 3259

{
  "contexts" : {
    "application" : {
      "positiveMatches" : {
        "EndpointAutoConfiguration#endpointOperationParameterMapper" : [ {
          "condition" : "OnBeanCondition",
          "message" : "@ConditionalOnMissingBean (types: org.springframework.boot.actuate.endpoint.invoke.ParameterValueMapper; SearchStrategy: all) did not find any beans"
        } ],
        "EndpointAutoConfiguration#endpointCachingOperationInvokerAdvisor" : [ {
          "condition" : "OnBeanCondition",
          "message" : "@ConditionalOnMissingBean (types: org.springframework.boot.actuate.endpoint.invoker.cache.CachingOperationInvokerAdvisor; SearchStrategy: all) did not find any beans"
        } ],
        "WebEndpointAutoConfiguration" : [ {
          "condition" : "OnWebApplicationCondition",
          "message" : "@ConditionalOnWebApplication (required) found 'session' scope"
        } ]
      },
      "negativeMatches" : {
        "WebFluxEndpointManagementContextConfiguration" : {
          "notMatched" : [ {
            "condition" : "OnWebApplicationCondition",
            "message" : "not a reactive web application"
          } ],
          "matched" : [ {
            "condition" : "OnClassCondition",
            "message" : "@ConditionalOnClass found required classes 'org.springframework.web.reactive.DispatcherHandler', 'org.springframework.http.server.reactive.HttpHandler'"
          } ]
        },
        "GsonHttpMessageConvertersConfiguration.GsonHttpMessageConverterConfiguration" : {
          "notMatched" : [ {
            "condition" : "GsonHttpMessageConvertersConfiguration.PreferGsonOrJacksonAndJsonbUnavailableCondition",
            "message" : "AnyNestedCondition 0 matched 2 did not; NestedCondition on GsonHttpMessageConvertersConfiguration.PreferGsonOrJacksonAndJsonbUnavailableCondition.JacksonJsonbUnavailable NoneNestedConditions 1 matched 1 did not; NestedCondition on GsonHttpMessageConvertersConfiguration.JacksonAndJsonbUnavailableCondition.JsonbPreferred @ConditionalOnProperty (spring.http.converters.preferred-json-mapper=jsonb) did not find property 'spring.http.converters.preferred-json-mapper'; NestedCondition on GsonHttpMessageConvertersConfiguration.JacksonAndJsonbUnavailableCondition.JacksonAvailable @ConditionalOnBean (types: org.springframework.http.converter.json.MappingJackson2HttpMessageConverter; SearchStrategy: all) found bean 'mappingJackson2HttpMessageConverter'; NestedCondition on GsonHttpMessageConvertersConfiguration.PreferGsonOrJacksonAndJsonbUnavailableCondition.GsonPreferred @ConditionalOnProperty (spring.http.converters.preferred-json-mapper=gson) did not find property 'spring.http.converters.preferred-json-mapper'"
          } ],
          "matched" : [ ]
        },
        "JsonbHttpMessageConvertersConfiguration" : {
          "notMatched" : [ {
            "condition" : "OnClassCondition",
            "message" : "@ConditionalOnClass did not find required class 'javax.json.bind.Jsonb'"
          } ],
          "matched" : [ ]
        }
      },
      "unconditionalClasses" : [ "org.springframework.boot.autoconfigure.context.PropertyPlaceholderAutoConfiguration", "org.springframework.boot.actuate.autoconfigure.endpoint.EndpointAutoConfiguration" ]
    }
  }
}

5.1.1. Response Structure

The response contains details of the application’s condition evaluation. The following table describes the structure of the response:

Path Type Description

contexts

Object

Application contexts keyed by id.

contexts.*.positiveMatches

Object

Classes and methods with conditions that were matched.

contexts.*.positiveMatches.*.[].condition

String

Name of the condition.

contexts.*.positiveMatches.*.[].message

String

Details of why the condition was matched.

contexts.*.negativeMatches

Object

Classes and methods with conditions that were not matched.

contexts.*.negativeMatches.*.notMatched

Array

Conditions that were matched.

contexts.*.negativeMatches.*.notMatched.[].condition

String

Name of the condition.

contexts.*.negativeMatches.*.notMatched.[].message

String

Details of why the condition was not matched.

contexts.*.negativeMatches.*.matched

Array

Conditions that were matched.

contexts.*.negativeMatches.*.matched.[].condition

String

Name of the condition.

contexts.*.negativeMatches.*.matched.[].message

String

Details of why the condition was matched.

contexts.*.unconditionalClasses

Array

Names of unconditional auto-configuration classes if any.

contexts.*.parentId

String

Id of the parent application context, if any.

6. Configuration Properties (configprops)

The configprops endpoint provides information about the application’s @ConfigurationProperties beans.

6.1. Retrieving the @ConfigurationProperties Bean

To retrieve the @ConfigurationProperties beans, make a GET request to /actuator/configprops, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/configprops' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 1806

{
  "contexts" : {
    "application" : {
      "beans" : {
        "management.endpoints.web.cors-org.springframework.boot.actuate.autoconfigure.endpoint.web.CorsEndpointProperties" : {
          "prefix" : "management.endpoints.web.cors",
          "properties" : {
            "allowedHeaders" : [ ],
            "allowedMethods" : [ ],
            "allowedOrigins" : [ ],
            "maxAge" : {
              "units" : [ "SECONDS", "NANOS" ]
            },
            "exposedHeaders" : [ ]
          }
        },
        "management.endpoints.web-org.springframework.boot.actuate.autoconfigure.endpoint.web.WebEndpointProperties" : {
          "prefix" : "management.endpoints.web",
          "properties" : {
            "pathMapping" : { },
            "exposure" : {
              "include" : [ "*" ],
              "exclude" : [ ]
            },
            "basePath" : "/actuator"
          }
        },
        "spring.resources-org.springframework.boot.autoconfigure.web.ResourceProperties" : {
          "prefix" : "spring.resources",
          "properties" : {
            "addMappings" : true,
            "chain" : {
              "cache" : true,
              "htmlApplicationCache" : false,
              "compressed" : false,
              "strategy" : {
                "fixed" : {
                  "enabled" : false,
                  "paths" : [ "/**" ]
                },
                "content" : {
                  "enabled" : false,
                  "paths" : [ "/**" ]
                }
              }
            },
            "cache" : {
              "cachecontrol" : { }
            },
            "staticLocations" : [ "classpath:/META-INF/resources/", "classpath:/resources/", "classpath:/static/", "classpath:/public/" ]
          }
        }
      }
    }
  }
}

6.1.1. Response Structure

The response contains details of the application’s @ConfigurationProperties beans. The following table describes the structure of the response:

Path Type Description

contexts

Object

Application contexts keyed by id.

contexts.*.beans.*

Object

@ConfigurationProperties beans keyed by bean name.

contexts.*.beans.*.prefix

String

Prefix applied to the names of the bean’s properties.

contexts.*.beans.*.properties

Object

Properties of the bean as name-value pairs.

contexts.*.parentId

String

Id of the parent application context, if any.

7. Environment (env)

The env endpoint provides information about the application’s Environment.

7.1. Retrieving the Entire Environment

To retrieve the entire environment, make a GET request to /actuator/env, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/env' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 799

{
  "activeProfiles" : [ ],
  "propertySources" : [ {
    "name" : "systemProperties",
    "properties" : {
      "java.runtime.name" : {
        "value" : "OpenJDK Runtime Environment"
      },
      "java.vm.version" : {
        "value" : "25.141-b15"
      },
      "java.vm.vendor" : {
        "value" : "Oracle Corporation"
      }
    }
  }, {
    "name" : "systemEnvironment",
    "properties" : {
      "JAVA_HOME" : {
        "value" : "/docker-java-home",
        "origin" : "System Environment Property \"JAVA_HOME\""
      }
    }
  }, {
    "name" : "applicationConfig: [classpath:/application.properties]",
    "properties" : {
      "com.example.cache.max-size" : {
        "value" : "1000",
        "origin" : "class path resource [application.properties]:1:29"
      }
    }
  } ]
}

7.1.1. Response Structure

The response contains details of the application’s Environment. The following table describes the structure of the response:

Path Type Description

activeProfiles

Array

Names of the active profiles, if any.

propertySources

Array

Property sources in order of precedence.

propertySources.[].name

String

Name of the property source.

propertySources.[].properties

Object

Properties in the property source keyed by property name.

propertySources.[].properties.*.value

String

Value of the property.

propertySources.[].properties.*.origin

String

Origin of the property, if any.

7.2. Retrieving a Single Property

To retrieve a single property, make a GET request to /actuator/env/{property.name}, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/env/com.example.cache.max-size' -i -X GET

The preceding example retrieves information about the property named com.example.cache.max-size. The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Disposition: inline;filename=f.txt
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 445

{
  "property" : {
    "source" : "applicationConfig: [classpath:/application.properties]",
    "value" : "1000"
  },
  "activeProfiles" : [ ],
  "propertySources" : [ {
    "name" : "systemProperties"
  }, {
    "name" : "systemEnvironment"
  }, {
    "name" : "applicationConfig: [classpath:/application.properties]",
    "property" : {
      "value" : "1000",
      "origin" : "class path resource [application.properties]:1:29"
    }
  } ]
}

7.2.1. Response Structure

The response contains details of the requested property. The following table describes the structure of the response:

Path Type Description

property

Object

Property from the environment, if found.

property.source

String

Name of the source of the property.

property.value

String

Value of the property.

activeProfiles

Array

Names of the active profiles, if any.

propertySources

Array

Property sources in order of precedence.

propertySources.[].name

String

Name of the property source.

propertySources.[].property

Object

Property in the property source, if any.

propertySources.[].property.value

String

Value of the property.

propertySources.[].property.origin

String

Origin of the property, if any.

8. Flyway (flyway)

The flyway endpoint provides information about database migrations performed by Flyway.

8.1. Retrieving the Migrations

To retrieve the migrations, make a GET request to /actuator/flyway, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/flyway' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 515

{
  "contexts" : {
    "application" : {
      "flywayBeans" : {
        "flyway" : {
          "migrations" : [ {
            "type" : "SQL",
            "checksum" : -156244537,
            "version" : "1",
            "description" : "init",
            "script" : "V1__init.sql",
            "state" : "SUCCESS",
            "installedBy" : "SA",
            "installedOn" : "2018-09-25T00:16:35.491Z",
            "installedRank" : 1,
            "executionTime" : 1
          } ]
        }
      }
    }
  }
}

8.1.1. Response Structure

The response contains details of the application’s Flyway migrations. The following table describes the structure of the response:

Path Type Description

contexts

Object

Application contexts keyed by id

contexts.*.flywayBeans.*.migrations

Array

Migrations performed by the Flyway instance, keyed by Flyway bean name.

contexts.*.flywayBeans.*.migrations.[].checksum

Number

Checksum of the migration, if any.

contexts.*.flywayBeans.*.migrations.[].description

String

Description of the migration, if any.

contexts.*.flywayBeans.*.migrations.[].executionTime

Number

Execution time in milliseconds of an applied migration.

contexts.*.flywayBeans.*.migrations.[].installedBy

String

User that installed the applied migration, if any.

contexts.*.flywayBeans.*.migrations.[].installedOn

String

Timestamp of when the applied migration was installed, if any.

contexts.*.flywayBeans.*.migrations.[].installedRank

Number

Rank of the applied migration, if any. Later migrations have higher ranks.

contexts.*.flywayBeans.*.migrations.[].script

String

Name of the script used to execute the migration, if any.

contexts.*.flywayBeans.*.migrations.[].state

String

State of the migration. (PENDING, ABOVE_TARGET, BELOW_BASELINE, BASELINE, IGNORED, MISSING_SUCCESS, MISSING_FAILED, SUCCESS, UNDONE, AVAILABLE, FAILED, OUT_OF_ORDER, FUTURE_SUCCESS, FUTURE_FAILED, OUTDATED, SUPERSEDED)

contexts.*.flywayBeans.*.migrations.[].type

String

Type of the migration. (SCHEMA, BASELINE, SQL, UNDO_SQL, JDBC, UNDO_JDBC, SPRING_JDBC, UNDO_SPRING_JDBC, CUSTOM, UNDO_CUSTOM)

contexts.*.flywayBeans.*.migrations.[].version

String

Version of the database after applying the migration, if any.

contexts.*.parentId

String

Id of the parent application context, if any.

9. Health (health)

The health endpoint provides detailed information about the health of the application.

9.1. Retrieving the Health of the application

To retrieve the health of the application, make a GET request to /actuator/health, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/health' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 670

{
  "status" : "UP",
  "details" : {
    "diskSpace" : {
      "status" : "UP",
      "details" : {
        "total" : 136535855104,
        "free" : 96949694464,
        "threshold" : 10485760
      }
    },
    "db" : {
      "status" : "UP",
      "details" : {
        "database" : "HSQL Database Engine",
        "hello" : 1
      }
    },
    "broker" : {
      "status" : "UP",
      "details" : {
        "us1" : {
          "status" : "UP",
          "details" : {
            "version" : "1.0.2"
          }
        },
        "us2" : {
          "status" : "UP",
          "details" : {
            "version" : "1.0.4"
          }
        }
      }
    }
  }
}

9.1.1. Response Structure

The response contains details of the health of the application. The following table describes the structure of the response:

Path Type Description

status

String

Overall status of the application.

details

Object

Details of the health of the application. Presence is controlled by management.endpoint.health.show-details).

details.*.status

String

Status of a specific part of the application.

details.*.details

Object

Details of the health of a specific part of the application.

9.2. Retrieving the Health of a component

To retrieve the health of a particular component of the application, make a GET request to /actuator/health/{component}, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/health/db' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 99

{
  "status" : "UP",
  "details" : {
    "database" : "HSQL Database Engine",
    "hello" : 1
  }
}

9.2.1. Response Structure

The response contains details of the health of a particular component of the application. The following table describes the structure of the response:

Path Type Description

status

String

Status of a specific part of the application

details

Object

Details of the health of a specific part of the application.

9.3. Retrieving the Health of a component instance

If a particular component consists of multiple instances (as the broker indicator in the example above), the health of a particular instance of that component can be retrieved by issuing a GET request to /actuator/health/{component}/{instance}, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/health/broker/us1' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 66

{
  "status" : "UP",
  "details" : {
    "version" : "1.0.2"
  }
}

9.3.1. Response Structure

The response contains details of the health of an instance of a particular component of the application. The following table describes the structure of the response:

Path Type Description

status

String

Status of a specific part of the application

details

Object

Details of the health of a specific part of the application.

10. Heap Dump (heapdump)

The heapdump endpoint provides a heap dump from the application’s JVM.

10.1. Retrieving the Heap Dump

To retrieve the heap dump, make a GET request to /actuator/heapdump. The response is binary data in HPROF format and can be large. Typically, you should save the response to disk for subsequent analysis. When using curl, this can be achieved by using the -O option, as shown in the following example:

$ curl 'http://localhost:8080/actuator/heapdump' -O

The preceding example results in a file named heapdump being written to the current working directory.

11. HTTP Trace (httptrace)

The httptrace endpoint provides information about HTTP request-response exchanges.

11.1. Retrieving the Traces

To retrieve the traces, make a GET request to /actuator/httptrace, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/httptrace' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 503

{
  "traces" : [ {
    "timestamp" : "2018-09-25T00:16:38.055Z",
    "principal" : {
      "name" : "alice"
    },
    "session" : {
      "id" : "d727b943-f5e3-468a-a1dd-ce55ab2ebbb3"
    },
    "request" : {
      "method" : "GET",
      "uri" : "https://api.example.com",
      "headers" : {
        "Accept" : [ "application/json" ]
      }
    },
    "response" : {
      "status" : 200,
      "headers" : {
        "Content-Type" : [ "application/json" ]
      }
    },
    "timeTaken" : 4
  } ]
}

11.1.1. Response Structure

The response contains details of the traced HTTP request-response exchanges. The following table describes the structure of the response:

Path Type Description

traces

Array

An array of traced HTTP request-response exchanges.

traces.[].timestamp

String

Timestamp of when the traced exchange occurred.

traces.[].principal

Object

Principal of the exchange, if any.

traces.[].principal.name

String

Name of the principal.

traces.[].request.method

String

HTTP method of the request.

traces.[].request.remoteAddress

String

Remote address from which the request was received, if known.

traces.[].request.uri

String

URI of the request.

traces.[].request.headers

Object

Headers of the request, keyed by header name.

traces.[].request.headers.*.[]

Array

Values of the header

traces.[].response.status

Number

Status of the response

traces.[].response.headers

Object

Headers of the response, keyed by header name.

traces.[].response.headers.*.[]

Array

Values of the header

traces.[].session

Object

Session associated with the exchange, if any.

traces.[].session.id

String

ID of the session.

traces.[].timeTaken

Number

Time, in milliseconds, taken to handle the exchange.

12. Info (info)

The info endpoint provides general information about the application.

12.1. Retrieving the Info

To retrieve the information about the application, make a GET request to /actuator/info, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/info' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 235

{
  "git" : {
    "commit" : {
      "time" : "+50702-01-15T13:18:58Z",
      "id" : "df027cf"
    },
    "branch" : "master"
  },
  "build" : {
    "version" : "1.0.3",
    "artifact" : "application",
    "group" : "com.example"
  }
}

12.1.1. Response Structure

The response contains general information about the application. Each section of the response is contributed by an InfoContributor. Spring Boot provides build and git contributions.

build Response Structure

The following table describe the structure of the build section of the response:

Path Type Description

artifact

String

Artifact ID of the application, if any.

group

String

Group ID of the application, if any.

name

String

Name of the application, if any.

version

String

Version of the application, if any.

time

Varies

Timestamp of when the application was built, if any.
git Response Structure

The following table describes the structure of the git section of the response:

Path Type Description

branch

String

Name of the Git branch, if any.

commit

Object

Details of the Git commit, if any.

commit.time

Varies

Timestamp of the commit, if any.

commit.id

String

ID of the commit, if any.

13. Spring Integration graph (integrationgraph)

The integrationgraph endpoint exposes a graph containing all Spring Integration components.

13.1. Retrieving the Spring Integration graph

To retrieve the information about the application, make a GET request to /actuator/integrationgraph, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/integrationgraph' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 586

{
  "contentDescriptor" : {
    "providerVersion" : "5.1.0.RC1",
    "providerFormatVersion" : 1.0,
    "provider" : "spring-integration"
  },
  "nodes" : [ {
    "nodeId" : 1,
    "name" : "nullChannel",
    "componentType" : "channel"
  }, {
    "nodeId" : 2,
    "name" : "errorChannel",
    "componentType" : "publish-subscribe-channel"
  }, {
    "nodeId" : 3,
    "name" : "_org.springframework.integration.errorLogger",
    "componentType" : "logging-channel-adapter",
    "input" : "errorChannel"
  } ],
  "links" : [ {
    "from" : 2,
    "to" : 3,
    "type" : "input"
  } ]
}

13.1.1. Response Structure

The response contains all Spring Integration components used within the application, as well as the links between them. More information about the structure can be found in the reference documentation.

13.2. Rebuilding the Spring Integration graph

To rebuild the exposed graph, make a POST request to /actuator/integrationgraph, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/integrationgraph' -i -X POST

This will result in a 204 - No Content response:

HTTP/1.1 204 No Content

14. Liquibase (liquibase)

The liquibase endpoint provides information about database change sets applied by Liquibase.

14.1. Retrieving the Changes

To retrieve the changes, make a GET request to /actuator/liquibase, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/liquibase' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 688

{
  "contexts" : {
    "application" : {
      "liquibaseBeans" : {
        "liquibase" : {
          "changeSets" : [ {
            "author" : "marceloverdijk",
            "changeLog" : "classpath:/db/changelog/db.changelog-master.yaml",
            "comments" : "",
            "contexts" : [ ],
            "dateExecuted" : "2018-09-25T00:15:50.831Z",
            "deploymentId" : "7834550811",
            "description" : "createTable tableName=customer",
            "execType" : "EXECUTED",
            "id" : "1",
            "labels" : [ ],
            "checksum" : "8:46debf252cce6d7b25e28ddeb9fc4bf6",
            "orderExecuted" : 1
          } ]
        }
      }
    }
  }
}

14.1.1. Response Structure

The response contains details of the application’s Liquibase change sets. The following table describes the structure of the response:

Path Type Description

contexts

Object

Application contexts keyed by id

contexts.*.liquibaseBeans.*.changeSets

Array

Change sets made by the Liquibase beans, keyed by bean name.

contexts.*.liquibaseBeans.*.changeSets[].author

String

Author of the change set.

contexts.*.liquibaseBeans.*.changeSets[].changeLog

String

Change log that contains the change set.

contexts.*.liquibaseBeans.*.changeSets[].comments

String

Comments on the change set.

contexts.*.liquibaseBeans.*.changeSets[].contexts

Array

Contexts of the change set.

contexts.*.liquibaseBeans.*.changeSets[].dateExecuted

String

Timestamp of when the change set was executed.

contexts.*.liquibaseBeans.*.changeSets[].deploymentId

String

ID of the deployment that ran the change set.

contexts.*.liquibaseBeans.*.changeSets[].description

String

Description of the change set.

contexts.*.liquibaseBeans.*.changeSets[].execType

String

Execution type of the change set (EXECUTED, FAILED, SKIPPED, RERAN, MARK_RAN).

contexts.*.liquibaseBeans.*.changeSets[].id

String

ID of the change set.

contexts.*.liquibaseBeans.*.changeSets[].labels

Array

Labels associated with the change set.

contexts.*.liquibaseBeans.*.changeSets[].checksum

String

Checksum of the change set.

contexts.*.liquibaseBeans.*.changeSets[].orderExecuted

Number

Order of the execution of the change set.

contexts.*.liquibaseBeans.*.changeSets[].tag

String

Tag associated with the change set, if any.

contexts.*.parentId

String

Id of the parent application context, if any.

15. Log File (logfile)

The logfile endpoint provides access to the contents of the application’s log file.

15.1. Retrieving the Log File

To retrieve the log file, make a GET request to /actuator/logfile, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/logfile' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Accept-Ranges: bytes
Content-Type: text/plain
Content-Length: 4723

  .   ____          _            __ _ _
 /\\ / ___'_ __ _ _(_)_ __  __ _ \ \ \ \
( ( )\___ | '_ | '_| | '_ \/ _` | \ \ \ \
 \\/  ___)| |_)| | | | | || (_| |  ) ) ) )
  '  |____| .__|_| |_|_| |_\__, | / / / /
 =========|_|==============|___/=/_/_/_/
 :: Spring Boot ::

2017-08-08 17:12:30.910  INFO 19866 --- [           main] s.f.SampleWebFreeMarkerApplication       : Starting SampleWebFreeMarkerApplication on host.local with PID 19866
2017-08-08 17:12:30.913  INFO 19866 --- [           main] s.f.SampleWebFreeMarkerApplication       : No active profile set, falling back to default profiles: default
2017-08-08 17:12:30.952  INFO 19866 --- [           main] ConfigServletWebServerApplicationContext : Refreshing org.springframework.boot.web.servlet.context.AnnotationConfigServletWebServerApplicationContext@76b10754: startup date [Tue Aug 08 17:12:30 BST 2017]; root of context hierarchy
2017-08-08 17:12:31.878  INFO 19866 --- [           main] o.s.b.w.embedded.tomcat.TomcatWebServer  : Tomcat initialized with port(s): 8080 (http)
2017-08-08 17:12:31.889  INFO 19866 --- [           main] o.apache.catalina.core.StandardService   : Starting service [Tomcat]
2017-08-08 17:12:31.890  INFO 19866 --- [           main] org.apache.catalina.core.StandardEngine  : Starting Servlet Engine: Apache Tomcat/8.5.16
2017-08-08 17:12:31.978  INFO 19866 --- [ost-startStop-1] o.a.c.c.C.[Tomcat].[localhost].[/]       : Initializing Spring embedded WebApplicationContext
2017-08-08 17:12:31.978  INFO 19866 --- [ost-startStop-1] o.s.web.context.ContextLoader            : Root WebApplicationContext: initialization completed in 1028 ms
2017-08-08 17:12:32.080  INFO 19866 --- [ost-startStop-1] o.s.b.w.servlet.ServletRegistrationBean  : Mapping servlet: 'dispatcherServlet' to [/]
2017-08-08 17:12:32.084  INFO 19866 --- [ost-startStop-1] o.s.b.w.servlet.FilterRegistrationBean   : Mapping filter: 'characterEncodingFilter' to: [/*]
2017-08-08 17:12:32.084  INFO 19866 --- [ost-startStop-1] o.s.b.w.servlet.FilterRegistrationBean   : Mapping filter: 'hiddenHttpMethodFilter' to: [/*]
2017-08-08 17:12:32.084  INFO 19866 --- [ost-startStop-1] o.s.b.w.servlet.FilterRegistrationBean   : Mapping filter: 'httpPutFormContentFilter' to: [/*]
2017-08-08 17:12:32.084  INFO 19866 --- [ost-startStop-1] o.s.b.w.servlet.FilterRegistrationBean   : Mapping filter: 'requestContextFilter' to: [/*]
2017-08-08 17:12:32.349  INFO 19866 --- [           main] s.w.s.m.m.a.RequestMappingHandlerAdapter : Looking for @ControllerAdvice: org.springframework.boot.web.servlet.context.AnnotationConfigServletWebServerApplicationContext@76b10754: startup date [Tue Aug 08 17:12:30 BST 2017]; root of context hierarchy
2017-08-08 17:12:32.420  INFO 19866 --- [           main] s.w.s.m.m.a.RequestMappingHandlerMapping : Mapped "{[/error]}" onto public org.springframework.http.ResponseEntity<java.util.Map<java.lang.String, java.lang.Object>> org.springframework.boot.autoconfigure.web.servlet.error.BasicErrorController.error(javax.servlet.http.HttpServletRequest)
2017-08-08 17:12:32.421  INFO 19866 --- [           main] s.w.s.m.m.a.RequestMappingHandlerMapping : Mapped "{[/error],produces=[text/html]}" onto public org.springframework.web.servlet.ModelAndView org.springframework.boot.autoconfigure.web.servlet.error.BasicErrorController.errorHtml(javax.servlet.http.HttpServletRequest,javax.servlet.http.HttpServletResponse)
2017-08-08 17:12:32.444  INFO 19866 --- [           main] o.s.w.s.handler.SimpleUrlHandlerMapping  : Mapped URL path [/webjars/**] onto handler of type [class org.springframework.web.servlet.resource.ResourceHttpRequestHandler]
2017-08-08 17:12:32.444  INFO 19866 --- [           main] o.s.w.s.handler.SimpleUrlHandlerMapping  : Mapped URL path [/**] onto handler of type [class org.springframework.web.servlet.resource.ResourceHttpRequestHandler]
2017-08-08 17:12:32.471  INFO 19866 --- [           main] o.s.w.s.handler.SimpleUrlHandlerMapping  : Mapped URL path [/**/favicon.ico] onto handler of type [class org.springframework.web.servlet.resource.ResourceHttpRequestHandler]
2017-08-08 17:12:32.600  INFO 19866 --- [           main] o.s.w.s.v.f.FreeMarkerConfigurer         : ClassTemplateLoader for Spring macros added to FreeMarker configuration
2017-08-08 17:12:32.681  INFO 19866 --- [           main] o.s.j.e.a.AnnotationMBeanExporter        : Registering beans for JMX exposure on startup
2017-08-08 17:12:32.744  INFO 19866 --- [           main] o.s.b.w.embedded.tomcat.TomcatWebServer  : Tomcat started on port(s): 8080 (http)
2017-08-08 17:12:32.750  INFO 19866 --- [           main] s.f.SampleWebFreeMarkerApplication       : Started SampleWebFreeMarkerApplication in 2.172 seconds (JVM running for 2.479)

15.2. Retrieving Part of the Log File

Retrieving part of the log file is not supported when using Jersey.

To retrieve part of the log file, make a GET request to /actuator/logfile by using the Range header, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/logfile' -i -X GET \
    -H 'Range: bytes=0-1023'

The preceding example retrieves the first 1024 bytes of the log file. The resulting response is similar to the following:

HTTP/1.1 206 Partial Content
Accept-Ranges: bytes
Content-Type: text/plain
Content-Range: bytes 0-1023/4723
Content-Length: 1024

  .   ____          _            __ _ _
 /\\ / ___'_ __ _ _(_)_ __  __ _ \ \ \ \
( ( )\___ | '_ | '_| | '_ \/ _` | \ \ \ \
 \\/  ___)| |_)| | | | | || (_| |  ) ) ) )
  '  |____| .__|_| |_|_| |_\__, | / / / /
 =========|_|==============|___/=/_/_/_/
 :: Spring Boot ::

2017-08-08 17:12:30.910  INFO 19866 --- [           main] s.f.SampleWebFreeMarkerApplication       : Starting SampleWebFreeMarkerApplication on host.local with PID 19866
2017-08-08 17:12:30.913  INFO 19866 --- [           main] s.f.SampleWebFreeMarkerApplication       : No active profile set, falling back to default profiles: default
2017-08-08 17:12:30.952  INFO 19866 --- [           main] ConfigServletWebServerApplicationContext : Refreshing org.springframework.boot.web.servlet.context.AnnotationConfigServletWebServerApplicationContext@76b10754: startup date [Tue Aug 08 17:12:30 BST 2017]; root of context hierarchy
2017-08-08 17:12:31.878  INFO 19866 --- [           main] o.s.b.w.embedded.tomcat.TomcatWebServer  : Tomcat initialized with port(

16. Loggers (loggers)

The loggers endpoint provides access to the application’s loggers and the configuration of their levels.

16.1. Retrieving All Loggers

To retrieve the application’s loggers, make a GET request to /actuator/loggers, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/loggers' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 283

{
  "levels" : [ "OFF", "FATAL", "ERROR", "WARN", "INFO", "DEBUG", "TRACE" ],
  "loggers" : {
    "ROOT" : {
      "configuredLevel" : "INFO",
      "effectiveLevel" : "INFO"
    },
    "com.example" : {
      "configuredLevel" : "DEBUG",
      "effectiveLevel" : "DEBUG"
    }
  }
}

16.1.1. Response Structure

The response contains details of the application’s loggers. The following table describes the structure of the response:

Path Type Description

levels

Array

Levels support by the logging system.

loggers

Object

Loggers keyed by name.

loggers.*.configuredLevel

String

Configured level of the logger, if any.

loggers.*.effectiveLevel

String

Effective level of the logger.

16.2. Retrieving a Single Logger

To retrieve a single logger, make a GET request to /actuator/loggers/{logger.name}, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/loggers/com.example' -i -X GET

The preceding example retrieves information about the logger named com.example. The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Disposition: inline;filename=f.txt
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 61

{
  "configuredLevel" : "INFO",
  "effectiveLevel" : "INFO"
}

16.2.1. Response Structure

The response contains details of the requested logger. The following table describes the structure of the response:

Path Type Description

configuredLevel

String

Configured level of the logger, if any.

effectiveLevel

String

Effective level of the logger.

16.3. Setting a Log Level

To set the level of a logger, make a POST request to /actuator/loggers/{logger.name} with a JSON body that specifies the configured level for the logger, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/loggers/com.example' -i -X POST \
    -H 'Content-Type: application/json' \
    -d '{"configuredLevel":"debug"}'

The preceding example sets the configuredLevel of the com.example logger to DEBUG.

16.3.1. Request Structure

The request specifies the desired level of the logger. The following table describes the structure of the request:

Path Type Description

configuredLevel

String

Level for the logger. May be omitted to clear the level.

16.4. Clearing a Log Level

To clear the level of a logger, make a POST request to /actuator/loggers/{logger.name} with a JSON body containing an empty object, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/loggers/com.example' -i -X POST \
    -H 'Content-Type: application/json' \
    -d '{}'

The preceding example clears the configured level of the com.example logger.

17. Mappings (mappings)

The mappings endpoint provides information about the application’s request mappings.

17.1. Retrieving the Mappings

To retrieve the mappings, make a GET request to /actuator/mappings, as shown in the following curl-based example:

$ curl 'http://localhost:35944/actuator/mappings' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Transfer-Encoding: chunked
Date: Tue, 25 Sep 2018 00:16:44 GMT
Content-Length: 6146

{
  "contexts" : {
    "application" : {
      "mappings" : {
        "dispatcherServlets" : {
          "dispatcherServlet" : [ {
            "handler" : "ResourceHttpRequestHandler [class path resource [META-INF/resources/], class path resource [resources/], class path resource [static/], class path resource [public/], ServletContext resource [/], class path resource []]",
            "predicate" : "/**/favicon.ico"
          }, {
            "handler" : "public java.lang.Object org.springframework.boot.actuate.endpoint.web.servlet.AbstractWebMvcEndpointHandlerMapping$OperationHandler.handle(javax.servlet.http.HttpServletRequest,java.util.Map<java.lang.String, java.lang.String>)",
            "predicate" : "{[/actuator/mappings],methods=[GET],produces=[application/vnd.spring-boot.actuator.v2+json || application/json]}",
            "details" : {
              "handlerMethod" : {
                "className" : "org.springframework.boot.actuate.endpoint.web.servlet.AbstractWebMvcEndpointHandlerMapping.OperationHandler",
                "name" : "handle",
                "descriptor" : "(Ljavax/servlet/http/HttpServletRequest;Ljava/util/Map;)Ljava/lang/Object;"
              },
              "requestMappingConditions" : {
                "consumes" : [ ],
                "headers" : [ ],
                "methods" : [ "GET" ],
                "params" : [ ],
                "patterns" : [ "/actuator/mappings" ],
                "produces" : [ {
                  "mediaType" : "application/vnd.spring-boot.actuator.v2+json",
                  "negated" : false
                }, {
                  "mediaType" : "application/json",
                  "negated" : false
                } ]
              }
            }
          }, {
            "handler" : "protected java.util.Map<java.lang.String, java.util.Map<java.lang.String, org.springframework.boot.actuate.endpoint.web.Link>> org.springframework.boot.actuate.endpoint.web.servlet.WebMvcEndpointHandlerMapping.links(javax.servlet.http.HttpServletRequest,javax.servlet.http.HttpServletResponse)",
            "predicate" : "{[/actuator],methods=[GET],produces=[application/vnd.spring-boot.actuator.v2+json || application/json]}",
            "details" : {
              "handlerMethod" : {
                "className" : "org.springframework.boot.actuate.endpoint.web.servlet.WebMvcEndpointHandlerMapping",
                "name" : "links",
                "descriptor" : "(Ljavax/servlet/http/HttpServletRequest;Ljavax/servlet/http/HttpServletResponse;)Ljava/util/Map;"
              },
              "requestMappingConditions" : {
                "consumes" : [ ],
                "headers" : [ ],
                "methods" : [ "GET" ],
                "params" : [ ],
                "patterns" : [ "/actuator" ],
                "produces" : [ {
                  "mediaType" : "application/vnd.spring-boot.actuator.v2+json",
                  "negated" : false
                }, {
                  "mediaType" : "application/json",
                  "negated" : false
                } ]
              }
            }
          }, {
            "handler" : "public java.lang.String org.springframework.boot.actuate.autoconfigure.endpoint.web.documentation.MappingsEndpointServletDocumentationTests$ExampleController.example()",
            "predicate" : "{[/],methods=[POST],params=[a!=alpha],headers=[X-Custom=Foo],consumes=[application/json || !application/xml],produces=[text/plain]}",
            "details" : {
              "handlerMethod" : {
                "className" : "org.springframework.boot.actuate.autoconfigure.endpoint.web.documentation.MappingsEndpointServletDocumentationTests.ExampleController",
                "name" : "example",
                "descriptor" : "()Ljava/lang/String;"
              },
              "requestMappingConditions" : {
                "consumes" : [ {
                  "mediaType" : "application/json",
                  "negated" : false
                }, {
                  "mediaType" : "application/xml",
                  "negated" : true
                } ],
                "headers" : [ {
                  "name" : "X-Custom",
                  "value" : "Foo",
                  "negated" : false
                } ],
                "methods" : [ "POST" ],
                "params" : [ {
                  "name" : "a",
                  "value" : "alpha",
                  "negated" : true
                } ],
                "patterns" : [ "/" ],
                "produces" : [ {
                  "mediaType" : "text/plain",
                  "negated" : false
                } ]
              }
            }
          }, {
            "handler" : "ResourceHttpRequestHandler [\"classpath:/META-INF/resources/webjars/\"]",
            "predicate" : "/webjars/**"
          }, {
            "handler" : "ResourceHttpRequestHandler [\"classpath:/META-INF/resources/\", \"classpath:/resources/\", \"classpath:/static/\", \"classpath:/public/\", \"/\"]",
            "predicate" : "/**"
          } ]
        },
        "servletFilters" : [ {
          "servletNameMappings" : [ ],
          "urlPatternMappings" : [ "/*" ],
          "name" : "requestContextFilter",
          "className" : "org.springframework.boot.web.servlet.filter.OrderedRequestContextFilter"
        }, {
          "servletNameMappings" : [ ],
          "urlPatternMappings" : [ "/*" ],
          "name" : "hiddenHttpMethodFilter",
          "className" : "org.springframework.boot.web.servlet.filter.OrderedHiddenHttpMethodFilter"
        }, {
          "servletNameMappings" : [ ],
          "urlPatternMappings" : [ "/*" ],
          "name" : "formContentFilter",
          "className" : "org.springframework.boot.web.servlet.filter.OrderedFormContentFilter"
        } ],
        "servlets" : [ {
          "mappings" : [ ],
          "name" : "default",
          "className" : "org.apache.catalina.servlets.DefaultServlet"
        }, {
          "mappings" : [ "/" ],
          "name" : "dispatcherServlet",
          "className" : "org.springframework.web.servlet.DispatcherServlet"
        } ]
      }
    }
  }
}

17.1.1. Response Structure

The response contains details of the application’s mappings. The items found in the response depend on the type of web application (reactive or Servlet-based). The following table describes the structure of the common elements of the response:

Path Type Description

contexts

Object

Application contexts keyed by id.

contexts.*.mappings

Object

Mappings in the context, keyed by mapping type.

contexts.*.mappings.dispatcherServlets

Object

Dispatcher servlet mappings, if any.

contexts.*.mappings.servletFilters

Array

Servlet filter mappings, if any.

contexts.*.mappings.servlets

Array

Servlet mappings, if any.

contexts.*.mappings.dispatcherHandlers

Object

Dispatcher handler mappings, if any.

contexts.*.parentId

String

Id of the parent application context, if any.

The entries that may be found in contexts.*.mappings are described in the following sections.

17.1.2. Dispatcher Servlets Response Structure

When using Spring MVC, the response contains details of any DispatcherServlet request mappings beneath contexts.*.mappings.dispatcherServlets. The following table describes the structure of this section of the response:

Path Type Description

*

Array

Dispatcher servlet mappings, if any, keyed by dispatcher servlet bean name.

*.[].details

Object

Additional implementation-specific details about the mapping. Optional.

*.[].handler

String

Handler for the mapping.

*.[].predicate

String

Predicate for the mapping.

*.[].details.handlerMethod

Object

Details of the method, if any, that will handle requests to this mapping.

*.[].details.handlerMethod.className

String

Fully qualified name of the class of the method.

*.[].details.handlerMethod.name

String

Name of the method.

*.[].details.handlerMethod.descriptor

String

Descriptor of the method as specified in the Java Language Specification.

*.[].details.requestMappingConditions

Object

Details of the request mapping conditions.

*.[].details.requestMappingConditions.consumes

Array

Details of the consumes condition

*.[].details.requestMappingConditions.consumes.[].mediaType

String

Consumed media type.

*.[].details.requestMappingConditions.consumes.[].negated

Boolean

Whether the media type is negated.

*.[].details.requestMappingConditions.headers

Array

Details of the headers condition.

*.[].details.requestMappingConditions.headers.[].name

String

Name of the header.

*.[].details.requestMappingConditions.headers.[].value

String

Required value of the header, if any.

*.[].details.requestMappingConditions.headers.[].negated

Boolean

Whether the value is negated.

*.[].details.requestMappingConditions.methods

Array

HTTP methods that are handled.

*.[].details.requestMappingConditions.params

Array

Details of the params condition.

*.[].details.requestMappingConditions.params.[].name

String

Name of the parameter.

*.[].details.requestMappingConditions.params.[].value

String

Required value of the parameter, if any.

*.[].details.requestMappingConditions.params.[].negated

Boolean

Whether the value is negated.

*.[].details.requestMappingConditions.patterns

Array

Patterns identifying the paths handled by the mapping.

*.[].details.requestMappingConditions.produces

Array

Details of the produces condition.

*.[].details.requestMappingConditions.produces.[].mediaType

String

Produced media type.

*.[].details.requestMappingConditions.produces.[].negated

Boolean

Whether the media type is negated.

17.1.3. Servlets Response Structure

When using the Servlet stack, the response contains details of any Servlet mappings beneath contexts.*.mappings.servlets. The following table describes the structure of this section of the response:

Path Type Description

[].mappings

Array

Mappings of the servlet.

[].name

String

Name of the servlet.

[].className

String

Class name of the servlet

17.1.4. Servlet Filters Response Structure

When using the Servlet stack, the response contains details of any Filter mappings beneath contexts.*.mappings.servletFilters. The following table describes the structure of this section of the response:

Path Type Description

[].servletNameMappings

Array

Names of the servlets to which the filter is mapped.

[].urlPatternMappings

Array

URL pattern to which the filter is mapped.

[].name

String

Name of the filter.

[].className

String

Class name of the filter

17.1.5. Dispatcher Handlers Response Structure

When using Spring WebFlux, the response contains details of any DispatcherHandler request mappings beneath contexts.*.mappings.dispatcherHandlers. The following table describes the structure of this section of the response:

Path Type Description

*

Array

Dispatcher handler mappings, if any, keyed by dispatcher handler bean name.

*.[].details

Object

Additional implementation-specific details about the mapping. Optional.

*.[].handler

String

Handler for the mapping.

*.[].predicate

String

Predicate for the mapping.

*.[].details.requestMappingConditions

Object

Details of the request mapping conditions.

*.[].details.requestMappingConditions.consumes

Array

Details of the consumes condition

*.[].details.requestMappingConditions.consumes.[].mediaType

String

Consumed media type.

*.[].details.requestMappingConditions.consumes.[].negated

Boolean

Whether the media type is negated.

*.[].details.requestMappingConditions.headers

Array

Details of the headers condition.

*.[].details.requestMappingConditions.headers.[].name

String

Name of the header.

*.[].details.requestMappingConditions.headers.[].value

String

Required value of the header, if any.

*.[].details.requestMappingConditions.headers.[].negated

Boolean

Whether the value is negated.

*.[].details.requestMappingConditions.methods

Array

HTTP methods that are handled.

*.[].details.requestMappingConditions.params

Array

Details of the params condition.

*.[].details.requestMappingConditions.params.[].name

String

Name of the parameter.

*.[].details.requestMappingConditions.params.[].value

String

Required value of the parameter, if any.

*.[].details.requestMappingConditions.params.[].negated

Boolean

Whether the value is negated.

*.[].details.requestMappingConditions.patterns

Array

Patterns identifying the paths handled by the mapping.

*.[].details.requestMappingConditions.produces

Array

Details of the produces condition.

*.[].details.requestMappingConditions.produces.[].mediaType

String

Produced media type.

*.[].details.requestMappingConditions.produces.[].negated

Boolean

Whether the media type is negated.

*.[].details.handlerMethod

Object

Details of the method, if any, that will handle requests to this mapping.

*.[].details.handlerMethod.className

String

Fully qualified name of the class of the method.

*.[].details.handlerMethod.name

String

Name of the method.

*.[].details.handlerMethod.descriptor

String

Descriptor of the method as specified in the Java Language Specification.

*.[].details.handlerFunction

Object

Details of the function, if any, that will handle requests to this mapping.

*.[].details.handlerFunction.className

String

Fully qualified name of the class of the function.

18. Metrics (metrics)

The metrics endpoint provides access to application metrics.

18.1. Retrieving Metric Names

To retrieve the names of the available metrics, make a GET request to /actuator/metrics, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/metrics' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 154

{
  "names" : [ "jvm.memory.max", "jvm.memory.used", "jvm.memory.committed", "jvm.buffer.memory.used", "jvm.buffer.count", "jvm.buffer.total.capacity" ]
}

18.1.1. Response Structure

The response contains details of the metric names. The following table describes the structure of the response:

Path Type Description

names

Array

Names of the known metrics.

18.2. Retrieving a Metric

To retrieve a metric, make a GET request to /actuator/metrics/{metric.name}, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/metrics/jvm.memory.max' -i -X GET

The preceding example retrieves information about the metric named jvm.memory.max. The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Disposition: inline;filename=f.txt
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 474

{
  "name" : "jvm.memory.max",
  "description" : "The maximum amount of memory in bytes that can be used for memory management",
  "baseUnit" : "bytes",
  "measurements" : [ {
    "statistic" : "VALUE",
    "value" : 2.384461823E9
  } ],
  "availableTags" : [ {
    "tag" : "area",
    "values" : [ "heap", "nonheap" ]
  }, {
    "tag" : "id",
    "values" : [ "Compressed Class Space", "PS Survivor Space", "PS Old Gen", "Metaspace", "PS Eden Space", "Code Cache" ]
  } ]
}

18.2.1. Query Parameters

The endpoint uses query parameters to drill down into a metric by using its tags. The following table shows the single supported query parameter:

Parameter Description

tag

A tag to use for drill-down in the form name:value.

18.2.2. Response structure

The response contains details of the metric. The following table describes the structure of the response:

Path Type Description

name

String

Name of the metric

description

String

Description of the metric

baseUnit

String

Base unit of the metric

measurements

Array

Measurements of the metric

measurements[].statistic

String

Statistic of the measurement. (TOTAL, TOTAL_TIME, COUNT, MAX, VALUE, UNKNOWN, ACTIVE_TASKS, DURATION).

measurements[].value

Number

Value of the measurement.

availableTags

Array

Tags that are available for drill-down.

availableTags[].tag

String

Name of the tag.

availableTags[].values

Array

Possible values of the tag.

18.3. Drilling Down

To drill down into a metric, make a GET request to /actuator/metrics/{metric.name} using the tag query parameter, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/metrics/jvm.memory.max?tag=area%3Anonheap&tag=id%3ACompressed+Class+Space' -i -X GET

The preceding example retrieves the jvm.memory.max metric, where the area tag has a value of nonheap and the id attribute has a value of Compressed Class Space. The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Disposition: inline;filename=f.txt
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 263

{
  "name" : "jvm.memory.max",
  "description" : "The maximum amount of memory in bytes that can be used for memory management",
  "baseUnit" : "bytes",
  "measurements" : [ {
    "statistic" : "VALUE",
    "value" : 1.073741824E9
  } ],
  "availableTags" : [ ]
}

19. Prometheus (prometheus)

The prometheus endpoint provides Spring Boot application’s metrics in the format required for scraping by a Prometheus server.

19.1. Retrieving the Metrics

To retrieve the metrics, make a GET request to /actuator/prometheus, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/prometheus' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: text/plain;version=0.0.4;charset=utf-8
Content-Length: 2336

# HELP jvm_memory_used_bytes The amount of used memory
# TYPE jvm_memory_used_bytes gauge
jvm_memory_used_bytes{area="nonheap",id="Code Cache",} 5.1206016E7
jvm_memory_used_bytes{area="nonheap",id="Metaspace",} 1.49505272E8
jvm_memory_used_bytes{area="nonheap",id="Compressed Class Space",} 2.0421304E7
jvm_memory_used_bytes{area="heap",id="PS Eden Space",} 2.82535152E8
jvm_memory_used_bytes{area="heap",id="PS Survivor Space",} 4067736.0
jvm_memory_used_bytes{area="heap",id="PS Old Gen",} 1.63879824E8
# HELP jvm_memory_max_bytes The maximum amount of memory in bytes that can be used for memory management
# TYPE jvm_memory_max_bytes gauge
jvm_memory_max_bytes{area="nonheap",id="Code Cache",} 2.5165824E8
jvm_memory_max_bytes{area="nonheap",id="Metaspace",} -1.0
jvm_memory_max_bytes{area="nonheap",id="Compressed Class Space",} 1.073741824E9
jvm_memory_max_bytes{area="heap",id="PS Eden Space",} 3.28728576E8
jvm_memory_max_bytes{area="heap",id="PS Survivor Space",} 1.4680064E7
jvm_memory_max_bytes{area="heap",id="PS Old Gen",} 7.16177408E8
# HELP jvm_buffer_memory_used_bytes An estimate of the memory that the Java virtual machine is using for this buffer pool
# TYPE jvm_buffer_memory_used_bytes gauge
jvm_buffer_memory_used_bytes{id="direct",} 16517.0
jvm_buffer_memory_used_bytes{id="mapped",} 0.0
# HELP jvm_buffer_total_capacity_bytes An estimate of the total capacity of the buffers in this pool
# TYPE jvm_buffer_total_capacity_bytes gauge
jvm_buffer_total_capacity_bytes{id="direct",} 16516.0
jvm_buffer_total_capacity_bytes{id="mapped",} 0.0
# HELP jvm_memory_committed_bytes The amount of memory in bytes that is committed for the Java virtual machine to use
# TYPE jvm_memory_committed_bytes gauge
jvm_memory_committed_bytes{area="nonheap",id="Code Cache",} 5.177344E7
jvm_memory_committed_bytes{area="nonheap",id="Metaspace",} 1.58334976E8
jvm_memory_committed_bytes{area="nonheap",id="Compressed Class Space",} 2.228224E7
jvm_memory_committed_bytes{area="heap",id="PS Eden Space",} 3.26107136E8
jvm_memory_committed_bytes{area="heap",id="PS Survivor Space",} 1.4680064E7
jvm_memory_committed_bytes{area="heap",id="PS Old Gen",} 4.6399488E8
# HELP jvm_buffer_count An estimate of the number of buffers in the pool
# TYPE jvm_buffer_count gauge
jvm_buffer_count{id="direct",} 4.0
jvm_buffer_count{id="mapped",} 0.0

20. Scheduled Tasks (scheduledtasks)

The scheduledtasks endpoint provides information about the application’s scheduled tasks.

20.1. Retrieving the Scheduled Tasks

To retrieve the scheduled tasks, make a GET request to /actuator/scheduledtasks, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/scheduledtasks' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 451

{
  "cron" : [ {
    "runnable" : {
      "target" : "com.example.Processor.processOrders"
    },
    "expression" : "0 0 0/3 1/1 * ?"
  } ],
  "fixedDelay" : [ {
    "runnable" : {
      "target" : "com.example.Processor.purge"
    },
    "initialDelay" : 5000,
    "interval" : 5000
  } ],
  "fixedRate" : [ {
    "runnable" : {
      "target" : "com.example.Processor.retrieveIssues"
    },
    "initialDelay" : 10000,
    "interval" : 3000
  } ]
}

20.1.1. Response Structure

The response contains details of the application’s scheduled tasks. The following table describes the structure of the response:

Path Type Description

cron

Array

Cron tasks, if any.

cron.[]runnable.target

String

Target that will be executed.

cron.[].expression

String

Cron expression.

fixedDelay

Array

Fixed delay tasks, if any.

fixedDelay.[]runnable.target

String

Target that will be executed.

fixedDelay.[].initialDelay

Number

Delay, in milliseconds, before first execution.

fixedDelay.[].interval

Number

Interval, in milliseconds, between the end of the last execution and the start of the next.

fixedRate

Array

Fixed rate tasks, if any.

fixedRate.[].runnable.target

String

Target that will be executed.

fixedRate.[].interval

Number

Interval, in milliseconds, between the start of each execution.

fixedRate.[].initialDelay

Number

Delay, in milliseconds, before first execution.

21. Sessions (sessions)

The sessions endpoint provides information about the application’s HTTP sessions that are managed by Spring Session.

21.1. Retrieving Sessions

To retrieve the sessions, make a GET request to /actuator/sessions, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/sessions?username=alice' -i -X GET

The preceding examples retrieves all of the sessions for the user whose username is alice.

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 753

{
  "sessions" : [ {
    "id" : "04f3e961-e9ed-49c7-926f-85b7aa868c39",
    "attributeNames" : [ ],
    "creationTime" : "2018-09-24T22:16:47.627Z",
    "lastAccessedTime" : "2018-09-25T00:16:35.627Z",
    "maxInactiveInterval" : 1800,
    "expired" : false
  }, {
    "id" : "ebd1e250-a3f6-40af-aeaa-5850c248a6f4",
    "attributeNames" : [ ],
    "creationTime" : "2018-09-24T12:16:47.626Z",
    "lastAccessedTime" : "2018-09-25T00:16:02.626Z",
    "maxInactiveInterval" : 1800,
    "expired" : false
  }, {
    "id" : "4db5efcc-99cb-4d05-a52c-b49acfbb7ea9",
    "attributeNames" : [ ],
    "creationTime" : "2018-09-24T19:16:47.627Z",
    "lastAccessedTime" : "2018-09-25T00:16:10.627Z",
    "maxInactiveInterval" : 1800,
    "expired" : false
  } ]
}

21.1.1. Query Parameters

The endpoint uses query parameters to limit the sessions that it returns. The following table shows the single required query parameter:

Parameter Description

username

Name of the user.

21.1.2. Response Structure

The response contains details of the matching sessions. The following table describes the structure of the response:

Path Type Description

sessions

Array

Sessions for the given username.

sessions.[].id

String

ID of the session.

sessions.[].attributeNames

Array

Names of the attributes stored in the session.

sessions.[].creationTime

String

Timestamp of when the session was created.

sessions.[].lastAccessedTime

String

Timestamp of when the session was last accessed.

sessions.[].maxInactiveInterval

Number

Maximum permitted period of inactivity, in seconds, before the session will expire.

sessions.[].expired

Boolean

Whether the session has expired.

21.2. Retrieving a Single Session

To retrieve a single session, make a GET request to /actuator/sessions/{id}, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/sessions/4db5efcc-99cb-4d05-a52c-b49acfbb7ea9' -i -X GET

The preceding example retrieves the session with the id of 4db5efcc-99cb-4d05-a52c-b49acfbb7ea9. The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 228

{
  "id" : "4db5efcc-99cb-4d05-a52c-b49acfbb7ea9",
  "attributeNames" : [ ],
  "creationTime" : "2018-09-24T19:16:47.627Z",
  "lastAccessedTime" : "2018-09-25T00:16:10.627Z",
  "maxInactiveInterval" : 1800,
  "expired" : false
}

21.2.1. Response Structure

The response contains details of the requested session. The following table describes the structure of the response:

Path Type Description

id

String

ID of the session.

attributeNames

Array

Names of the attributes stored in the session.

creationTime

String

Timestamp of when the session was created.

lastAccessedTime

String

Timestamp of when the session was last accessed.

maxInactiveInterval

Number

Maximum permitted period of inactivity, in seconds, before the session will expire.

expired

Boolean

Whether the session has expired.

21.3. Deleting a Session

To delete a session, make a DELETE request to /actuator/sessions/{id}, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/sessions/4db5efcc-99cb-4d05-a52c-b49acfbb7ea9' -i -X DELETE

The preceding example deletes the session with the id of 4db5efcc-99cb-4d05-a52c-b49acfbb7ea9.

22. Shutdown (shutdown)

The shutdown endpoint is used to shut down the application.

22.1. Shutting Down the Application

To shut down the application, make a POST request to /actuator/shutdown, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/shutdown' -i -X POST

A response similar to the following is produced:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 41

{
  "message" : "Shutting down, bye..."
}

22.1.1. Response Structure

The response contains details of the result of the shutdown request. The following table describes the structure of the response:

Path Type Description

message

String

Message describing the result of the request.

23. Thread Dump (threaddump)

The threaddump endpoint provides a thread dump from the application’s JVM.

23.1. Retrieving the Thread Dump

To retrieve the thread dump, make a GET request to /actuator/threaddump, as shown in the following curl-based example:

$ curl 'http://localhost:8080/actuator/threaddump' -i -X GET

The resulting response is similar to the following:

HTTP/1.1 200 OK
Content-Type: application/vnd.spring-boot.actuator.v2+json;charset=UTF-8
Content-Length: 4520

{
  "threads" : [ {
    "threadName" : "Thread-376",
    "threadId" : 855,
    "blockedTime" : -1,
    "blockedCount" : 0,
    "waitedTime" : -1,
    "waitedCount" : 1,
    "lockOwnerId" : -1,
    "inNative" : false,
    "suspended" : false,
    "threadState" : "TIMED_WAITING",
    "stackTrace" : [ {
      "methodName" : "sleep",
      "fileName" : "Thread.java",
      "lineNumber" : -2,
      "className" : "java.lang.Thread",
      "nativeMethod" : true
    }, {
      "methodName" : "performShutdown",
      "fileName" : "ShutdownEndpoint.java",
      "lineNumber" : 67,
      "className" : "org.springframework.boot.actuate.context.ShutdownEndpoint",
      "nativeMethod" : false
    }, {
      "methodName" : "run",
      "lineNumber" : -1,
      "className" : "org.springframework.boot.actuate.context.ShutdownEndpoint$$Lambda$1353/443399469",
      "nativeMethod" : false
    }, {
      "methodName" : "run",
      "fileName" : "Thread.java",
      "lineNumber" : 748,
      "className" : "java.lang.Thread",
      "nativeMethod" : false
    } ],
    "lockedMonitors" : [ ],
    "lockedSynchronizers" : [ ]
  }, {
    "threadName" : "pool-10-thread-1",
    "threadId" : 847,
    "blockedTime" : -1,
    "blockedCount" : 0,
    "waitedTime" : -1,
    "waitedCount" : 2,
    "lockName" : "java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject@e21492b",
    "lockOwnerId" : -1,
    "inNative" : false,
    "suspended" : false,
    "threadState" : "TIMED_WAITING",
    "stackTrace" : [ {
      "methodName" : "park",
      "fileName" : "Unsafe.java",
      "lineNumber" : -2,
      "className" : "sun.misc.Unsafe",
      "nativeMethod" : true
    }, {
      "methodName" : "parkNanos",
      "fileName" : "LockSupport.java",
      "lineNumber" : 215,
      "className" : "java.util.concurrent.locks.LockSupport",
      "nativeMethod" : false
    }, {
      "methodName" : "awaitNanos",
      "fileName" : "AbstractQueuedSynchronizer.java",
      "lineNumber" : 2078,
      "className" : "java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject",
      "nativeMethod" : false
    }, {
      "methodName" : "take",
      "fileName" : "ScheduledThreadPoolExecutor.java",
      "lineNumber" : 1093,
      "className" : "java.util.concurrent.ScheduledThreadPoolExecutor$DelayedWorkQueue",
      "nativeMethod" : false
    }, {
      "methodName" : "take",
      "fileName" : "ScheduledThreadPoolExecutor.java",
      "lineNumber" : 809,
      "className" : "java.util.concurrent.ScheduledThreadPoolExecutor$DelayedWorkQueue",
      "nativeMethod" : false
    }, {
      "methodName" : "getTask",
      "fileName" : "ThreadPoolExecutor.java",
      "lineNumber" : 1074,
      "className" : "java.util.concurrent.ThreadPoolExecutor",
      "nativeMethod" : false
    }, {
      "methodName" : "runWorker",
      "fileName" : "ThreadPoolExecutor.java",
      "lineNumber" : 1134,
      "className" : "java.util.concurrent.ThreadPoolExecutor",
      "nativeMethod" : false
    }, {
      "methodName" : "run",
      "fileName" : "ThreadPoolExecutor.java",
      "lineNumber" : 624,
      "className" : "java.util.concurrent.ThreadPoolExecutor$Worker",
      "nativeMethod" : false
    }, {
      "methodName" : "run",
      "fileName" : "Thread.java",
      "lineNumber" : 748,
      "className" : "java.lang.Thread",
      "nativeMethod" : false
    } ],
    "lockedMonitors" : [ ],
    "lockedSynchronizers" : [ ],
    "lockInfo" : {
      "className" : "java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject",
      "identityHashCode" : 237062443
    }
  }, {
    "threadName" : "http-nio-auto-15-35944-AsyncTimeout",
    "threadId" : 840,
    "blockedTime" : -1,
    "blockedCount" : 0,
    "waitedTime" : -1,
    "waitedCount" : 6,
    "lockOwnerId" : -1,
    "inNative" : false,
    "suspended" : false,
    "threadState" : "TIMED_WAITING",
    "stackTrace" : [ {
      "methodName" : "sleep",
      "fileName" : "Thread.java",
      "lineNumber" : -2,
      "className" : "java.lang.Thread",
      "nativeMethod" : true
    }, {
      "methodName" : "run",
      "fileName" : "AbstractProtocol.java",
      "lineNumber" : 1113,
      "className" : "org.apache.coyote.AbstractProtocol$AsyncTimeout",
      "nativeMethod" : false
    }, {
      "methodName" : "run",
      "fileName" : "Thread.java",
      "lineNumber" : 748,
      "className" : "java.lang.Thread",
      "nativeMethod" : false
    } ],
    "lockedMonitors" : [ ],
    "lockedSynchronizers" : [ ]
  } ]
}

23.1.1. Response Structure

The response contains details of the JVM’s threads. The following table describes the structure of the response:

Path Type Description

threads

Array

JVM’s threads.

threads.[].blockedCount

Number

Total number of times that the thread has been blocked.

threads.[].blockedTime

Number

Time in milliseconds that the thread has spent blocked. -1 if thread contention monitoring is disabled.

threads.[].daemon

Boolean

Whether the thread is a daemon thread. Only available on Java 9 or later.

threads.[].inNative

Boolean

Whether the thread is executing native code.

threads.[].lockName

String

Description of the object on which the thread is blocked, if any.

threads.[].lockInfo

Object

Object for which the thread is blocked waiting.

threads.[].lockInfo.className

String

Fully qualified class name of the lock object.

threads.[].lockInfo.identityHashCode

Number

Identity hash code of the lock object.

threads.[].lockedMonitors

Array

Monitors locked by this thread, if any

threads.[].lockedMonitors.[].className

String

Class name of the lock object.

threads.[].lockedMonitors.[].identityHashCode

Number

Identity hash code of the lock object.

threads.[].lockedMonitors.[].lockedStackDepth

Number

Stack depth where the monitor was locked.

threads.[].lockedMonitors.[].lockedStackFrame

Object

Stack frame that locked the monitor.

threads.[].lockedSynchronizers

Array

Synchronizers locked by this thread.

threads.[].lockedSynchronizers.[].className

String

Class name of the locked synchronizer.

threads.[].lockedSynchronizers.[].identifyHashCode

Number

Identity hash code of the locked synchronizer.

threads.[].lockOwnerId

Number

ID of the thread that owns the object on which the thread is blocked. -1 if the thread is not blocked.

threads.[].lockOwnerName

String

Name of the thread that owns the object on which the thread is blocked, if any.

threads.[].priority

Number

Priority of the thread. Only available on Java 9 or later.

threads.[].stackTrace

Array

Stack trace of the thread.

threads.[].stackTrace.[].classLoaderName

String

Name of the class loader of the class that contains the execution point identified by this entry, if any. Only available on Java 9 or later.

threads.[].stackTrace.[].className

String

Name of the class that contains the execution point identified by this entry.

threads.[].stackTrace.[].fileName

String

Name of the source file that contains the execution point identified by this entry, if any.

threads.[].stackTrace.[].lineNumber

Number

Line number of the execution point identified by this entry. Negative if unknown.

threads.[].stackTrace.[].methodName

String

Name of the method.

threads.[].stackTrace.[].moduleName

String

Name of the module that contains the execution point identified by this entry, if any. Only available on Java 9 or later.

threads.[].stackTrace.[].moduleVersion

String

Version of the module that contains the execution point identified by this entry, if any. Only available on Java 9 or later.

threads.[].stackTrace.[].nativeMethod

Boolean

Whether the execution point is a native method.

threads.[].suspended

Boolean

Whether the thread is suspended.

threads.[].threadId

Number

ID of the thread.

threads.[].threadName

String

Name of the thread.

threads.[].threadState

String

State of the thread (NEW, RUNNABLE, BLOCKED, WAITING, TIMED_WAITING, TERMINATED).

threads.[].waitedCount

Number

Total number of times that the thread has waited for notification.

threads.[].waitedTime

Number

Time in milliseconds that the thread has spent waiting. -1 if thread contention monitoring is disabled