If you are getting started with Spring Boot, or “Spring” in general, start by reading this section. It answers the basic “what?”, “how?” and “why?” questions. It includes an introduction to Spring Boot, along with installation instructions. We then walk you through building your first Spring Boot application, discussing some core principles as we go.
1. Introducing Spring Boot
Spring Boot helps you to create stand-alone, production-grade Spring-based Applications that you can run. We take an opinionated view of the Spring platform and third-party libraries, so that you can get started with minimum fuss. Most Spring Boot applications need very little Spring configuration.
You can use Spring Boot to create Java applications that can be started by using java -jar
or more traditional war deployments.
We also provide a command line tool that runs “spring scripts”.
Our primary goals are:
-
Provide a radically faster and widely accessible getting-started experience for all Spring development.
-
Be opinionated out of the box but get out of the way quickly as requirements start to diverge from the defaults.
-
Provide a range of non-functional features that are common to large classes of projects (such as embedded servers, security, metrics, health checks, and externalized configuration).
-
Absolutely no code generation and no requirement for XML configuration.
2. System Requirements
Spring Boot 2.4.5 requires Java 8 and is compatible up to Java 16 (included). Spring Framework 5.3.6 or above is also required.
Explicit build support is provided for the following build tools:
Build Tool | Version |
---|---|
Maven |
3.3+ |
Gradle |
6 (6.3 or later). 5.6.x is also supported but in a deprecated form |
3. Installing Spring Boot
Spring Boot can be used with “classic” Java development tools or installed as a command line tool. Either way, you need Java SDK v1.8 or higher. Before you begin, you should check your current Java installation by using the following command:
$ java -version
If you are new to Java development or if you want to experiment with Spring Boot, you might want to try the Spring Boot CLI (Command Line Interface) first. Otherwise, read on for “classic” installation instructions.
3.1. Installation Instructions for the Java Developer
You can use Spring Boot in the same way as any standard Java library.
To do so, include the appropriate spring-boot-*.jar
files on your classpath.
Spring Boot does not require any special tools integration, so you can use any IDE or text editor.
Also, there is nothing special about a Spring Boot application, so you can run and debug a Spring Boot application as you would any other Java program.
Although you could copy Spring Boot jars, we generally recommend that you use a build tool that supports dependency management (such as Maven or Gradle).
3.1.1. Maven Installation
Spring Boot is compatible with Apache Maven 3.3 or above. If you do not already have Maven installed, you can follow the instructions at maven.apache.org.
On many operating systems, Maven can be installed with a package manager.
If you use OSX Homebrew, try brew install maven .
Ubuntu users can run sudo apt-get install maven .
Windows users with Chocolatey can run choco install maven from an elevated (administrator) prompt.
|
Spring Boot dependencies use the org.springframework.boot
groupId
.
Typically, your Maven POM file inherits from the spring-boot-starter-parent
project and declares dependencies to one or more “Starters”.
Spring Boot also provides an optional Maven plugin to create executable jars.
More details on getting started with Spring Boot and Maven can be found in the Getting Started section of the Maven plugin’s reference guide.
3.1.2. Gradle Installation
Spring Boot is compatible with Gradle 6 (6.3 or later). Gradle 5.6.x is also supported but this support is deprecated and will be removed in a future release. If you do not already have Gradle installed, you can follow the instructions at gradle.org.
Spring Boot dependencies can be declared by using the org.springframework.boot
group
.
Typically, your project declares dependencies to one or more “Starters”.
Spring Boot provides a useful Gradle plugin that can be used to simplify dependency declarations and to create executable jars.
More details on getting started with Spring Boot and Gradle can be found in the Getting Started section of the Gradle plugin’s reference guide.
3.2. Installing the Spring Boot CLI
The Spring Boot CLI (Command Line Interface) is a command line tool that you can use to quickly prototype with Spring. It lets you run Groovy scripts, which means that you have a familiar Java-like syntax without so much boilerplate code.
You do not need to use the CLI to work with Spring Boot, but it is definitely the quickest way to get a Spring application off the ground.
3.2.1. Manual Installation
You can download the Spring CLI distribution from the Spring software repository:
Cutting edge snapshot distributions are also available.
Once downloaded, follow the INSTALL.txt instructions from the unpacked archive.
In summary, there is a spring
script (spring.bat
for Windows) in a bin/
directory in the .zip
file.
Alternatively, you can use java -jar
with the .jar
file (the script helps you to be sure that the classpath is set correctly).
3.2.2. Installation with SDKMAN!
SDKMAN! (The Software Development Kit Manager) can be used for managing multiple versions of various binary SDKs, including Groovy and the Spring Boot CLI. Get SDKMAN! from sdkman.io and install Spring Boot by using the following commands:
$ sdk install springboot $ spring --version Spring Boot v2.4.5
If you develop features for the CLI and want access to the version you built, use the following commands:
$ sdk install springboot dev /path/to/spring-boot/spring-boot-cli/target/spring-boot-cli-2.4.5-bin/spring-2.4.5/ $ sdk default springboot dev $ spring --version Spring CLI v2.4.5
The preceding instructions install a local instance of spring
called the dev
instance.
It points at your target build location, so every time you rebuild Spring Boot, spring
is up-to-date.
You can see it by running the following command:
$ sdk ls springboot ================================================================================ Available Springboot Versions ================================================================================ > + dev * 2.4.5 ================================================================================ + - local version * - installed > - currently in use ================================================================================
3.2.3. OSX Homebrew Installation
If you are on a Mac and use Homebrew, you can install the Spring Boot CLI by using the following commands:
$ brew tap spring-io/tap $ brew install spring-boot
Homebrew installs spring
to /usr/local/bin
.
If you do not see the formula, your installation of brew might be out-of-date.
In that case, run brew update and try again.
|
3.2.4. MacPorts Installation
If you are on a Mac and use MacPorts, you can install the Spring Boot CLI by using the following command:
$ sudo port install spring-boot-cli
3.2.5. Command-line Completion
The Spring Boot CLI includes scripts that provide command completion for the BASH and zsh shells.
You can source
the script (also named spring
) in any shell or put it in your personal or system-wide bash completion initialization.
On a Debian system, the system-wide scripts are in /shell-completion/bash
and all scripts in that directory are executed when a new shell starts.
For example, to run the script manually if you have installed by using SDKMAN!, use the following commands:
$ . ~/.sdkman/candidates/springboot/current/shell-completion/bash/spring $ spring <HIT TAB HERE> grab help jar run test version
If you install the Spring Boot CLI by using Homebrew or MacPorts, the command-line completion scripts are automatically registered with your shell. |
3.2.6. Windows Scoop Installation
If you are on a Windows and use Scoop, you can install the Spring Boot CLI by using the following commands:
> scoop bucket add extras > scoop install springboot
Scoop installs spring
to ~/scoop/apps/springboot/current/bin
.
If you do not see the app manifest, your installation of scoop might be out-of-date.
In that case, run scoop update and try again.
|
3.2.7. Quick-start Spring CLI Example
You can use the following web application to test your installation.
To start, create a file called app.groovy
, as follows:
@RestController
class ThisWillActuallyRun {
@RequestMapping("/")
String home() {
"Hello World!"
}
}
Then run it from a shell, as follows:
$ spring run app.groovy
The first run of your application is slow, as dependencies are downloaded. Subsequent runs are much quicker. |
Open localhost:8080
in your favorite web browser.
You should see the following output:
Hello World!
3.3. Upgrading from an Earlier Version of Spring Boot
If you are upgrading from the 1.x
release of Spring Boot, check the “migration guide” on the project wiki that provides detailed upgrade instructions.
Check also the “release notes” for a list of “new and noteworthy” features for each release.
When upgrading to a new feature release, some properties may have been renamed or removed. Spring Boot provides a way to analyze your application’s environment and print diagnostics at startup, but also temporarily migrate properties at runtime for you. To enable that feature, add the following dependency to your project:
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-properties-migrator</artifactId>
<scope>runtime</scope>
</dependency>
Properties that are added late to the environment, such as when using @PropertySource , will not be taken into account.
|
Once you’re done with the migration, please make sure to remove this module from your project’s dependencies. |
To upgrade an existing CLI installation, use the appropriate package manager command (for example, brew upgrade
).
If you manually installed the CLI, follow the standard instructions, remembering to update your PATH
environment variable to remove any older references.
4. Developing Your First Spring Boot Application
This section describes how to develop a small “Hello World!” web application that highlights some of Spring Boot’s key features. We use Maven to build this project, since most IDEs support it.
The spring.io web site contains many “Getting Started” guides that use Spring Boot. If you need to solve a specific problem, check there first. You can shortcut the steps below by going to start.spring.io and choosing the "Web" starter from the dependencies searcher. Doing so generates a new project structure so that you can start coding right away. Check the Spring Initializr documentation for more details. |
Before we begin, open a terminal and run the following commands to ensure that you have valid versions of Java and Maven installed:
$ java -version java version "1.8.0_102" Java(TM) SE Runtime Environment (build 1.8.0_102-b14) Java HotSpot(TM) 64-Bit Server VM (build 25.102-b14, mixed mode)
$ mvn -v Apache Maven 3.5.4 (1edded0938998edf8bf061f1ceb3cfdeccf443fe; 2018-06-17T14:33:14-04:00) Maven home: /usr/local/Cellar/maven/3.3.9/libexec Java version: 1.8.0_102, vendor: Oracle Corporation
This sample needs to be created in its own directory. Subsequent instructions assume that you have created a suitable directory and that it is your current directory. |
4.1. Creating the POM
We need to start by creating a Maven pom.xml
file.
The pom.xml
is the recipe that is used to build your project.
Open your favorite text editor and add the following:
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 https://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.example</groupId>
<artifactId>myproject</artifactId>
<version>0.0.1-SNAPSHOT</version>
<parent>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-parent</artifactId>
<version>2.4.5</version>
</parent>
<description/>
<developers>
<developer/>
</developers>
<licenses>
<license/>
</licenses>
<scm>
<url/>
</scm>
<url/>
<!-- Additional lines to be added here... -->
</project>
The preceding listing should give you a working build.
You can test it by running mvn package
(for now, you can ignore the “jar will be empty - no content was marked for inclusion!” warning).
At this point, you could import the project into an IDE (most modern Java IDEs include built-in support for Maven). For simplicity, we continue to use a plain text editor for this example. |
4.2. Adding Classpath Dependencies
Spring Boot provides a number of “Starters” that let you add jars to your classpath.
Our applications for smoke tests use the spring-boot-starter-parent
in the parent
section of the POM.
The spring-boot-starter-parent
is a special starter that provides useful Maven defaults.
It also provides a dependency-management
section so that you can omit version
tags for “blessed” dependencies.
Other “Starters” provide dependencies that you are likely to need when developing a specific type of application.
Since we are developing a web application, we add a spring-boot-starter-web
dependency.
Before that, we can look at what we currently have by running the following command:
$ mvn dependency:tree [INFO] com.example:myproject:jar:0.0.1-SNAPSHOT
The mvn dependency:tree
command prints a tree representation of your project dependencies.
You can see that spring-boot-starter-parent
provides no dependencies by itself.
To add the necessary dependencies, edit your pom.xml
and add the spring-boot-starter-web
dependency immediately below the parent
section:
<dependencies>
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-web</artifactId>
</dependency>
</dependencies>
If you run mvn dependency:tree
again, you see that there are now a number of additional dependencies, including the Tomcat web server and Spring Boot itself.
4.3. Writing the Code
To finish our application, we need to create a single Java file.
By default, Maven compiles sources from src/main/java
, so you need to create that directory structure and then add a file named src/main/java/Example.java
to contain the following code:
import org.springframework.boot.*;
import org.springframework.boot.autoconfigure.*;
import org.springframework.web.bind.annotation.*;
@RestController
@EnableAutoConfiguration
public class Example {
@RequestMapping("/")
String home() {
return "Hello World!";
}
public static void main(String[] args) {
SpringApplication.run(Example.class, args);
}
}
Although there is not much code here, quite a lot is going on. We step through the important parts in the next few sections.
4.3.1. The @RestController and @RequestMapping Annotations
The first annotation on our Example
class is @RestController
.
This is known as a stereotype annotation.
It provides hints for people reading the code and for Spring that the class plays a specific role.
In this case, our class is a web @Controller
, so Spring considers it when handling incoming web requests.
The @RequestMapping
annotation provides “routing” information.
It tells Spring that any HTTP request with the /
path should be mapped to the home
method.
The @RestController
annotation tells Spring to render the resulting string directly back to the caller.
The @RestController and @RequestMapping annotations are Spring MVC annotations (they are not specific to Spring Boot).
See the MVC section in the Spring Reference Documentation for more details.
|
4.3.2. The @EnableAutoConfiguration Annotation
The second class-level annotation is @EnableAutoConfiguration
.
This annotation tells Spring Boot to “guess” how you want to configure Spring, based on the jar dependencies that you have added.
Since spring-boot-starter-web
added Tomcat and Spring MVC, the auto-configuration assumes that you are developing a web application and sets up Spring accordingly.
4.3.3. The “main” Method
The final part of our application is the main
method.
This is a standard method that follows the Java convention for an application entry point.
Our main method delegates to Spring Boot’s SpringApplication
class by calling run
.
SpringApplication
bootstraps our application, starting Spring, which, in turn, starts the auto-configured Tomcat web server.
We need to pass Example.class
as an argument to the run
method to tell SpringApplication
which is the primary Spring component.
The args
array is also passed through to expose any command-line arguments.
4.4. Running the Example
At this point, your application should work.
Since you used the spring-boot-starter-parent
POM, you have a useful run
goal that you can use to start the application.
Type mvn spring-boot:run
from the root project directory to start the application.
You should see output similar to the following:
$ mvn spring-boot:run . ____ _ __ _ _ /\\ / ___'_ __ _ _(_)_ __ __ _ \ \ \ \ ( ( )\___ | '_ | '_| | '_ \/ _` | \ \ \ \ \\/ ___)| |_)| | | | | || (_| | ) ) ) ) ' |____| .__|_| |_|_| |_\__, | / / / / =========|_|==============|___/=/_/_/_/ :: Spring Boot :: (v2.4.5) ....... . . . ....... . . . (log output here) ....... . . . ........ Started Example in 2.222 seconds (JVM running for 6.514)
If you open a web browser to localhost:8080
, you should see the following output:
Hello World!
To gracefully exit the application, press ctrl-c
.
4.5. Creating an Executable Jar
We finish our example by creating a completely self-contained executable jar file that we could run in production. Executable jars (sometimes called “fat jars”) are archives containing your compiled classes along with all of the jar dependencies that your code needs to run.
To create an executable jar, we need to add the spring-boot-maven-plugin
to our pom.xml
.
To do so, insert the following lines just below the dependencies
section:
<build>
<plugins>
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
</plugin>
</plugins>
</build>
The spring-boot-starter-parent POM includes <executions> configuration to bind the repackage goal.
If you do not use the parent POM, you need to declare this configuration yourself.
See the plugin documentation for details.
|
Save your pom.xml
and run mvn package
from the command line, as follows:
$ mvn package [INFO] Scanning for projects... [INFO] [INFO] ------------------------------------------------------------------------ [INFO] Building myproject 0.0.1-SNAPSHOT [INFO] ------------------------------------------------------------------------ [INFO] .... .. [INFO] --- maven-jar-plugin:2.4:jar (default-jar) @ myproject --- [INFO] Building jar: /Users/developer/example/spring-boot-example/target/myproject-0.0.1-SNAPSHOT.jar [INFO] [INFO] --- spring-boot-maven-plugin:2.4.5:repackage (default) @ myproject --- [INFO] ------------------------------------------------------------------------ [INFO] BUILD SUCCESS [INFO] ------------------------------------------------------------------------
If you look in the target
directory, you should see myproject-0.0.1-SNAPSHOT.jar
.
The file should be around 10 MB in size.
If you want to peek inside, you can use jar tvf
, as follows:
$ jar tvf target/myproject-0.0.1-SNAPSHOT.jar
You should also see a much smaller file named myproject-0.0.1-SNAPSHOT.jar.original
in the target
directory.
This is the original jar file that Maven created before it was repackaged by Spring Boot.
To run that application, use the java -jar
command, as follows:
$ java -jar target/myproject-0.0.1-SNAPSHOT.jar . ____ _ __ _ _ /\\ / ___'_ __ _ _(_)_ __ __ _ \ \ \ \ ( ( )\___ | '_ | '_| | '_ \/ _` | \ \ \ \ \\/ ___)| |_)| | | | | || (_| | ) ) ) ) ' |____| .__|_| |_|_| |_\__, | / / / / =========|_|==============|___/=/_/_/_/ :: Spring Boot :: (v2.4.5) ....... . . . ....... . . . (log output here) ....... . . . ........ Started Example in 2.536 seconds (JVM running for 2.864)
As before, to exit the application, press ctrl-c
.
5. What to Read Next
Hopefully, this section provided some of the Spring Boot basics and got you on your way to writing your own applications. If you are a task-oriented type of developer, you might want to jump over to spring.io and check out some of the getting started guides that solve specific “How do I do that with Spring?” problems. We also have Spring Boot-specific “How-to” reference documentation.
Otherwise, the next logical step is to read using-spring-boot.html. If you are really impatient, you could also jump ahead and read about Spring Boot features.