3.1.1

Reference Guide

This guide describes the Apache Kafka implementation of the Spring Cloud Stream Binder. It contains information about its design, usage, and configuration options, as well as information on how the Stream Cloud Stream concepts map onto Apache Kafka specific constructs. In addition, this guide explains the Kafka Streams binding capabilities of Spring Cloud Stream.

1. Apache Kafka Binder

1.1. Usage

To use Apache Kafka binder, you need to add spring-cloud-stream-binder-kafka as a dependency to your Spring Cloud Stream application, as shown in the following example for Maven:

<dependency>
  <groupId>org.springframework.cloud</groupId>
  <artifactId>spring-cloud-stream-binder-kafka</artifactId>
</dependency>

Alternatively, you can also use the Spring Cloud Stream Kafka Starter, as shown in the following example for Maven:

<dependency>
  <groupId>org.springframework.cloud</groupId>
  <artifactId>spring-cloud-starter-stream-kafka</artifactId>
</dependency>

1.2. Overview

The following image shows a simplified diagram of how the Apache Kafka binder operates:

kafka binder
Figure 1. Kafka Binder

The Apache Kafka Binder implementation maps each destination to an Apache Kafka topic. The consumer group maps directly to the same Apache Kafka concept. Partitioning also maps directly to Apache Kafka partitions as well.

The binder currently uses the Apache Kafka kafka-clients version 2.3.1. This client can communicate with older brokers (see the Kafka documentation), but certain features may not be available. For example, with versions earlier than 0.11.x.x, native headers are not supported. Also, 0.11.x.x does not support the autoAddPartitions property.

1.3. Configuration Options

This section contains the configuration options used by the Apache Kafka binder.

For common configuration options and properties pertaining to the binder, see the binding properties in core documentation.

1.3.1. Kafka Binder Properties

spring.cloud.stream.kafka.binder.brokers

A list of brokers to which the Kafka binder connects.

Default: localhost.

spring.cloud.stream.kafka.binder.defaultBrokerPort

brokers allows hosts specified with or without port information (for example, host1,host2:port2). This sets the default port when no port is configured in the broker list.

Default: 9092.

spring.cloud.stream.kafka.binder.configuration

Key/Value map of client properties (both producers and consumer) passed to all clients created by the binder. Due to the fact that these properties are used by both producers and consumers, usage should be restricted to common properties — for example, security settings. Unknown Kafka producer or consumer properties provided through this configuration are filtered out and not allowed to propagate. Properties here supersede any properties set in boot.

Default: Empty map.

spring.cloud.stream.kafka.binder.consumerProperties

Key/Value map of arbitrary Kafka client consumer properties. In addition to support known Kafka consumer properties, unknown consumer properties are allowed here as well. Properties here supersede any properties set in boot and in the configuration property above.

Default: Empty map.

spring.cloud.stream.kafka.binder.headers

The list of custom headers that are transported by the binder. Only required when communicating with older applications (⇐ 1.3.x) with a kafka-clients version < 0.11.0.0. Newer versions support headers natively.

Default: empty.

spring.cloud.stream.kafka.binder.healthTimeout

The time to wait to get partition information, in seconds. Health reports as down if this timer expires.

Default: 10.

spring.cloud.stream.kafka.binder.requiredAcks

The number of required acks on the broker. See the Kafka documentation for the producer acks property.

Default: 1.

spring.cloud.stream.kafka.binder.minPartitionCount

Effective only if autoCreateTopics or autoAddPartitions is set. The global minimum number of partitions that the binder configures on topics on which it produces or consumes data. It can be superseded by the partitionCount setting of the producer or by the value of instanceCount * concurrency settings of the producer (if either is larger).

Default: 1.

spring.cloud.stream.kafka.binder.producerProperties

Key/Value map of arbitrary Kafka client producer properties. In addition to support known Kafka producer properties, unknown producer properties are allowed here as well. Properties here supersede any properties set in boot and in the configuration property above.

Default: Empty map.

spring.cloud.stream.kafka.binder.replicationFactor

The replication factor of auto-created topics if autoCreateTopics is active. Can be overridden on each binding.

If you are using Kafka broker versions prior to 2.4, then this value should be set to at least 1. Starting with version 3.0.8, the binder uses -1 as the default value, which indicates that the broker 'default.replication.factor' property will be used to determine the number of replicas. Check with your Kafka broker admins to see if there is a policy in place that requires a minimum replication factor, if that’s the case then, typically, the default.replication.factor will match that value and -1 should be used, unless you need a replication factor greater than the minimum.

Default: -1.

spring.cloud.stream.kafka.binder.autoCreateTopics

If set to true, the binder creates new topics automatically. If set to false, the binder relies on the topics being already configured. In the latter case, if the topics do not exist, the binder fails to start.

This setting is independent of the auto.create.topics.enable setting of the broker and does not influence it. If the server is set to auto-create topics, they may be created as part of the metadata retrieval request, with default broker settings.

Default: true.

spring.cloud.stream.kafka.binder.autoAddPartitions

If set to true, the binder creates new partitions if required. If set to false, the binder relies on the partition size of the topic being already configured. If the partition count of the target topic is smaller than the expected value, the binder fails to start.

Default: false.

spring.cloud.stream.kafka.binder.transaction.transactionIdPrefix

Enables transactions in the binder. See transaction.id in the Kafka documentation and Transactions in the spring-kafka documentation. When transactions are enabled, individual producer properties are ignored and all producers use the spring.cloud.stream.kafka.binder.transaction.producer.* properties.

Default null (no transactions)

spring.cloud.stream.kafka.binder.transaction.producer.*

Global producer properties for producers in a transactional binder. See spring.cloud.stream.kafka.binder.transaction.transactionIdPrefix and Kafka Producer Properties and the general producer properties supported by all binders.

Default: See individual producer properties.

spring.cloud.stream.kafka.binder.headerMapperBeanName

The bean name of a KafkaHeaderMapper used for mapping spring-messaging headers to and from Kafka headers. Use this, for example, if you wish to customize the trusted packages in a BinderHeaderMapper bean that uses JSON deserialization for the headers. If this custom BinderHeaderMapper bean is not made available to the binder using this property, then the binder will look for a header mapper bean with the name kafkaBinderHeaderMapper that is of type BinderHeaderMapper before falling back to a default BinderHeaderMapper created by the binder.

Default: none.

spring.cloud.stream.kafka.binder.considerDownWhenAnyPartitionHasNoLeader

Flag to set the binder health as down, when any partitions on the topic, regardless of the consumer that is receiving data from it, is found without a leader.

Default: false.

spring.cloud.stream.kafka.binder.certificateStoreDirectory

When the truststore or keystore certificate location is given as a classpath URL (classpath:…​), the binder copies the resource from the classpath location inside the JAR file to a location on the filesystem. The file will be moved to the location specified as the value for this property which must be an existing directory on the filesystem that is writable by the process running the application. If this value is not set and the certificate file is a classpath resource, then it will be moved to System’s temp directory as returned by System.getProperty("java.io.tmpdir"). This is also true, if this value is present, but the directory cannot be found on the filesystem or is not writable.

Default: none.

1.3.2. Kafka Consumer Properties

To avoid repetition, Spring Cloud Stream supports setting values for all channels, in the format of spring.cloud.stream.kafka.default.consumer.<property>=<value>.

The following properties are available for Kafka consumers only and must be prefixed with spring.cloud.stream.kafka.bindings.<channelName>.consumer..

admin.configuration

Since version 2.1.1, this property is deprecated in favor of topic.properties, and support for it will be removed in a future version.

admin.replicas-assignment

Since version 2.1.1, this property is deprecated in favor of topic.replicas-assignment, and support for it will be removed in a future version.

admin.replication-factor

Since version 2.1.1, this property is deprecated in favor of topic.replication-factor, and support for it will be removed in a future version.

autoRebalanceEnabled

When true, topic partitions is automatically rebalanced between the members of a consumer group. When false, each consumer is assigned a fixed set of partitions based on spring.cloud.stream.instanceCount and spring.cloud.stream.instanceIndex. This requires both the spring.cloud.stream.instanceCount and spring.cloud.stream.instanceIndex properties to be set appropriately on each launched instance. The value of the spring.cloud.stream.instanceCount property must typically be greater than 1 in this case.

Default: true.

ackEachRecord

When autoCommitOffset is true, this setting dictates whether to commit the offset after each record is processed. By default, offsets are committed after all records in the batch of records returned by consumer.poll() have been processed. The number of records returned by a poll can be controlled with the max.poll.records Kafka property, which is set through the consumer configuration property. Setting this to true may cause a degradation in performance, but doing so reduces the likelihood of redelivered records when a failure occurs. Also, see the binder requiredAcks property, which also affects the performance of committing offsets. This property is deprecated as of 3.1 in favor of using ackMode. If the ackMode is not set and batch mode is not enabled, RECORD ackMode will be used.

Default: false.

autoCommitOffset

Whether to autocommit offsets when a message has been processed. If set to false, a header with the key kafka_acknowledgment of the type org.springframework.kafka.support.Acknowledgment header is present in the inbound message. Applications may use this header for acknowledging messages. See the examples section for details. When this property is set to false, Kafka binder sets the ack mode to org.springframework.kafka.listener.AbstractMessageListenerContainer.AckMode.MANUAL and the application is responsible for acknowledging records. Also see ackEachRecord. This property is deprecated as of 3.1. See ackMode for more details.

Default: true.

ackMode

Specify the container ack mode. This is based on the AckMode enumeration defined in Spring Kafka. If ackEachRecord property is set to true and consumer is not in batch mode, then this will use the ack mode of RECORD, otherwise, use the provided ack mode using this property.

autoCommitOnError

Effective only if autoCommitOffset is set to true. If set to false, it suppresses auto-commits for messages that result in errors and commits only for successful messages. It allows a stream to automatically replay from the last successfully processed message, in case of persistent failures. If set to true, it always auto-commits (if auto-commit is enabled). If not set (the default), it effectively has the same value as enableDlq, auto-committing erroneous messages if they are sent to a DLQ and not committing them otherwise.

Default: not set.

resetOffsets

Whether to reset offsets on the consumer to the value provided by startOffset. Must be false if a KafkaRebalanceListener is provided; see Using a KafkaRebalanceListener.

Default: false.

startOffset

The starting offset for new groups. Allowed values: earliest and latest. If the consumer group is set explicitly for the consumer 'binding' (through spring.cloud.stream.bindings.<channelName>.group), 'startOffset' is set to earliest. Otherwise, it is set to latest for the anonymous consumer group. Also see resetOffsets (earlier in this list).

Default: null (equivalent to earliest).

enableDlq

When set to true, it enables DLQ behavior for the consumer. By default, messages that result in errors are forwarded to a topic named error.<destination>.<group>. The DLQ topic name can be configurable by setting the dlqName property or by defining a @Bean of type DlqDestinationResolver. This provides an alternative option to the more common Kafka replay scenario for the case when the number of errors is relatively small and replaying the entire original topic may be too cumbersome. See Dead-Letter Topic Processing processing for more information. Starting with version 2.0, messages sent to the DLQ topic are enhanced with the following headers: x-original-topic, x-exception-message, and x-exception-stacktrace as byte[]. By default, a failed record is sent to the same partition number in the DLQ topic as the original record. See Dead-Letter Topic Partition Selection for how to change that behavior. Not allowed when destinationIsPattern is true.

Default: false.

dlqPartitions

When enableDlq is true, and this property is not set, a dead letter topic with the same number of partitions as the primary topic(s) is created. Usually, dead-letter records are sent to the same partition in the dead-letter topic as the original record. This behavior can be changed; see Dead-Letter Topic Partition Selection. If this property is set to 1 and there is no DqlPartitionFunction bean, all dead-letter records will be written to partition 0. If this property is greater than 1, you MUST provide a DlqPartitionFunction bean. Note that the actual partition count is affected by the binder’s minPartitionCount property.

Default: none

configuration

Map with a key/value pair containing generic Kafka consumer properties. In addition to having Kafka consumer properties, other configuration properties can be passed here. For example some properties needed by the application such as spring.cloud.stream.kafka.bindings.input.consumer.configuration.foo=bar. The bootstrap.servers property cannot be set here; use multi-binder support if you need to connect to multiple clusters.

Default: Empty map.

dlqName

The name of the DLQ topic to receive the error messages.

Default: null (If not specified, messages that result in errors are forwarded to a topic named error.<destination>.<group>).

dlqProducerProperties

Using this, DLQ-specific producer properties can be set. All the properties available through kafka producer properties can be set through this property. When native decoding is enabled on the consumer (i.e., useNativeDecoding: true) , the application must provide corresponding key/value serializers for DLQ. This must be provided in the form of dlqProducerProperties.configuration.key.serializer and dlqProducerProperties.configuration.value.serializer.

Default: Default Kafka producer properties.

standardHeaders

Indicates which standard headers are populated by the inbound channel adapter. Allowed values: none, id, timestamp, or both. Useful if using native deserialization and the first component to receive a message needs an id (such as an aggregator that is configured to use a JDBC message store).

Default: none

converterBeanName

The name of a bean that implements RecordMessageConverter. Used in the inbound channel adapter to replace the default MessagingMessageConverter.

Default: null

idleEventInterval

The interval, in milliseconds, between events indicating that no messages have recently been received. Use an ApplicationListener<ListenerContainerIdleEvent> to receive these events. See Example: Pausing and Resuming the Consumer for a usage example.

Default: 30000

destinationIsPattern

When true, the destination is treated as a regular expression Pattern used to match topic names by the broker. When true, topics are not provisioned, and enableDlq is not allowed, because the binder does not know the topic names during the provisioning phase. Note, the time taken to detect new topics that match the pattern is controlled by the consumer property metadata.max.age.ms, which (at the time of writing) defaults to 300,000ms (5 minutes). This can be configured using the configuration property above.

Default: false

topic.properties

A Map of Kafka topic properties used when provisioning new topics — for example, spring.cloud.stream.kafka.bindings.input.consumer.topic.properties.message.format.version=0.9.0.0

Default: none.

topic.replicas-assignment

A Map<Integer, List<Integer>> of replica assignments, with the key being the partition and the value being the assignments. Used when provisioning new topics. See the NewTopic Javadocs in the kafka-clients jar.

Default: none.

topic.replication-factor

The replication factor to use when provisioning topics. Overrides the binder-wide setting. Ignored if replicas-assignments is present.

Default: none (the binder-wide default of -1 is used).

pollTimeout

Timeout used for polling in pollable consumers.

Default: 5 seconds.

transactionManager

Bean name of a KafkaAwareTransactionManager used to override the binder’s transaction manager for this binding. Usually needed if you want to synchronize another transaction with the Kafka transaction, using the ChainedKafkaTransactionManaager. To achieve exactly once consumption and production of records, the consumer and producer bindings must all be configured with the same transaction manager.

Default: none.

1.3.3. Consuming Batches

Starting with version 3.0, when spring.cloud.stream.binding.<name>.consumer.batch-mode is set to true, all of the records received by polling the Kafka Consumer will be presented as a List<?> to the listener method. Otherwise, the method will be called with one record at a time. The size of the batch is controlled by Kafka consumer properties max.poll.records, min.fetch.bytes, fetch.max.wait.ms; refer to the Kafka documentation for more information.

Bear in mind that batch mode is not supported with @StreamListener - it only works with the newer functional programming model.

Retry within the binder is not supported when using batch mode, so maxAttempts will be overridden to 1. You can configure a SeekToCurrentBatchErrorHandler (using a ListenerContainerCustomizer) to achieve similar functionality to retry in the binder. You can also use a manual AckMode and call Ackowledgment.nack(index, sleep) to commit the offsets for a partial batch and have the remaining records redelivered. Refer to the Spring for Apache Kafka documentation for more information about these techniques.

1.3.4. Kafka Producer Properties

To avoid repetition, Spring Cloud Stream supports setting values for all channels, in the format of spring.cloud.stream.kafka.default.producer.<property>=<value>.

The following properties are available for Kafka producers only and must be prefixed with spring.cloud.stream.kafka.bindings.<channelName>.producer..

admin.configuration

Since version 2.1.1, this property is deprecated in favor of topic.properties, and support for it will be removed in a future version.

admin.replicas-assignment

Since version 2.1.1, this property is deprecated in favor of topic.replicas-assignment, and support for it will be removed in a future version.

admin.replication-factor

Since version 2.1.1, this property is deprecated in favor of topic.replication-factor, and support for it will be removed in a future version.

bufferSize

Upper limit, in bytes, of how much data the Kafka producer attempts to batch before sending.

Default: 16384.

sync

Whether the producer is synchronous.

Default: false.

sendTimeoutExpression

A SpEL expression evaluated against the outgoing message used to evaluate the time to wait for ack when synchronous publish is enabled — for example, headers['mySendTimeout']. The value of the timeout is in milliseconds. With versions before 3.0, the payload could not be used unless native encoding was being used because, by the time this expression was evaluated, the payload was already in the form of a byte[]. Now, the expression is evaluated before the payload is converted.

Default: none.

batchTimeout

How long the producer waits to allow more messages to accumulate in the same batch before sending the messages. (Normally, the producer does not wait at all and simply sends all the messages that accumulated while the previous send was in progress.) A non-zero value may increase throughput at the expense of latency.

Default: 0.

messageKeyExpression

A SpEL expression evaluated against the outgoing message used to populate the key of the produced Kafka message — for example, headers['myKey']. With versions before 3.0, the payload could not be used unless native encoding was being used because, by the time this expression was evaluated, the payload was already in the form of a byte[]. Now, the expression is evaluated before the payload is converted. In the case of a regular processor (Function<String, String> or Function<Message<?>, Message<?>), if the produced key needs to be same as the incoming key from the topic, this property can be set as below. spring.cloud.stream.kafka.bindings.<output-binding-name>.producer.messageKeyExpression: headers['kafka_receivedMessageKey'] There is an important caveat to keep in mind for reactive functions. In that case, it is up to the application to manually copy the headers from the incoming messages to outbound messages. You can set the header, e.g. myKey and use headers['myKey'] as suggested above or, for convenience, simply set the KafkaHeaders.MESSAGE_KEY header, and you do not need to set this property at all.

Default: none.

headerPatterns

A comma-delimited list of simple patterns to match Spring messaging headers to be mapped to the Kafka Headers in the ProducerRecord. Patterns can begin or end with the wildcard character (asterisk). Patterns can be negated by prefixing with !. Matching stops after the first match (positive or negative). For example !ask,as* will pass ash but not ask. id and timestamp are never mapped.

Default: * (all headers - except the id and timestamp)

configuration

Map with a key/value pair containing generic Kafka producer properties. The bootstrap.servers property cannot be set here; use multi-binder support if you need to connect to multiple clusters.

Default: Empty map.

topic.properties

A Map of Kafka topic properties used when provisioning new topics — for example, spring.cloud.stream.kafka.bindings.output.producer.topic.properties.message.format.version=0.9.0.0

topic.replicas-assignment

A Map<Integer, List<Integer>> of replica assignments, with the key being the partition and the value being the assignments. Used when provisioning new topics. See the NewTopic Javadocs in the kafka-clients jar.

Default: none.

topic.replication-factor

The replication factor to use when provisioning topics. Overrides the binder-wide setting. Ignored if replicas-assignments is present.

Default: none (the binder-wide default of -1 is used).

useTopicHeader

Set to true to override the default binding destination (topic name) with the value of the KafkaHeaders.TOPIC message header in the outbound message. If the header is not present, the default binding destination is used. Default: false.

recordMetadataChannel

The bean name of a MessageChannel to which successful send results should be sent; the bean must exist in the application context. The message sent to the channel is the sent message (after conversion, if any) with an additional header KafkaHeaders.RECORD_METADATA. The header contains a RecordMetadata object provided by the Kafka client; it includes the partition and offset where the record was written in the topic.

ResultMetadata meta = sendResultMsg.getHeaders().get(KafkaHeaders.RECORD_METADATA, RecordMetadata.class)

Failed sends go the producer error channel (if configured); see Error Channels. Default: null

+

The Kafka binder uses the partitionCount setting of the producer as a hint to create a topic with the given partition count (in conjunction with the minPartitionCount, the maximum of the two being the value being used). Exercise caution when configuring both minPartitionCount for a binder and partitionCount for an application, as the larger value is used. If a topic already exists with a smaller partition count and autoAddPartitions is disabled (the default), the binder fails to start. If a topic already exists with a smaller partition count and autoAddPartitions is enabled, new partitions are added. If a topic already exists with a larger number of partitions than the maximum of (minPartitionCount or partitionCount), the existing partition count is used.
compression

Set the compression.type producer property. Supported values are none, gzip, snappy, lz4 and zstd. If you override the kafka-clients jar to 2.1.0 (or later), as discussed in the Spring for Apache Kafka documentation, and wish to use zstd compression, use spring.cloud.stream.kafka.bindings.<binding-name>.producer.configuration.compression.type=zstd.

Default: none.

transactionManager

Bean name of a KafkaAwareTransactionManager used to override the binder’s transaction manager for this binding. Usually needed if you want to synchronize another transaction with the Kafka transaction, using the ChainedKafkaTransactionManaager. To achieve exactly once consumption and production of records, the consumer and producer bindings must all be configured with the same transaction manager.

Default: none.

closeTimeout

Timeout in number of seconds to wait for when closing the producer.

Default: 30

allowNonTransactional

Normally, all output bindings associated with a transactional binder will publish in a new transaction, if one is not already in process. This property allows you to override that behavior. If set to true, records published to this output binding will not be run in a transaction, unless one is already in process.

Default: false

1.3.5. Usage examples

In this section, we show the use of the preceding properties for specific scenarios.

Example: Setting autoCommitOffset to false and Relying on Manual Acking

This example illustrates how one may manually acknowledge offsets in a consumer application.

This example requires that spring.cloud.stream.kafka.bindings.input.consumer.autoCommitOffset be set to false. Use the corresponding input channel name for your example.

@SpringBootApplication
@EnableBinding(Sink.class)
public class ManuallyAcknowdledgingConsumer {

 public static void main(String[] args) {
     SpringApplication.run(ManuallyAcknowdledgingConsumer.class, args);
 }

 @StreamListener(Sink.INPUT)
 public void process(Message<?> message) {
     Acknowledgment acknowledgment = message.getHeaders().get(KafkaHeaders.ACKNOWLEDGMENT, Acknowledgment.class);
     if (acknowledgment != null) {
         System.out.println("Acknowledgment provided");
         acknowledgment.acknowledge();
     }
 }
}
Example: Security Configuration

Apache Kafka 0.9 supports secure connections between client and brokers. To take advantage of this feature, follow the guidelines in the Apache Kafka Documentation as well as the Kafka 0.9 security guidelines from the Confluent documentation. Use the spring.cloud.stream.kafka.binder.configuration option to set security properties for all clients created by the binder.

For example, to set security.protocol to SASL_SSL, set the following property:

spring.cloud.stream.kafka.binder.configuration.security.protocol=SASL_SSL

All the other security properties can be set in a similar manner.

When using Kerberos, follow the instructions in the reference documentation for creating and referencing the JAAS configuration.

Spring Cloud Stream supports passing JAAS configuration information to the application by using a JAAS configuration file and using Spring Boot properties.

Using JAAS Configuration Files

The JAAS and (optionally) krb5 file locations can be set for Spring Cloud Stream applications by using system properties. The following example shows how to launch a Spring Cloud Stream application with SASL and Kerberos by using a JAAS configuration file:

 java -Djava.security.auth.login.config=/path.to/kafka_client_jaas.conf -jar log.jar \
   --spring.cloud.stream.kafka.binder.brokers=secure.server:9092 \
   --spring.cloud.stream.bindings.input.destination=stream.ticktock \
   --spring.cloud.stream.kafka.binder.configuration.security.protocol=SASL_PLAINTEXT
Using Spring Boot Properties

As an alternative to having a JAAS configuration file, Spring Cloud Stream provides a mechanism for setting up the JAAS configuration for Spring Cloud Stream applications by using Spring Boot properties.

The following properties can be used to configure the login context of the Kafka client:

spring.cloud.stream.kafka.binder.jaas.loginModule

The login module name. Not necessary to be set in normal cases.

Default: com.sun.security.auth.module.Krb5LoginModule.

spring.cloud.stream.kafka.binder.jaas.controlFlag

The control flag of the login module.

Default: required.

spring.cloud.stream.kafka.binder.jaas.options

Map with a key/value pair containing the login module options.

Default: Empty map.

The following example shows how to launch a Spring Cloud Stream application with SASL and Kerberos by using Spring Boot configuration properties:

 java --spring.cloud.stream.kafka.binder.brokers=secure.server:9092 \
   --spring.cloud.stream.bindings.input.destination=stream.ticktock \
   --spring.cloud.stream.kafka.binder.autoCreateTopics=false \
   --spring.cloud.stream.kafka.binder.configuration.security.protocol=SASL_PLAINTEXT \
   --spring.cloud.stream.kafka.binder.jaas.options.useKeyTab=true \
   --spring.cloud.stream.kafka.binder.jaas.options.storeKey=true \
   --spring.cloud.stream.kafka.binder.jaas.options.keyTab=/etc/security/keytabs/kafka_client.keytab \
   --spring.cloud.stream.kafka.binder.jaas.options.principal=kafka-client-1@EXAMPLE.COM

The preceding example represents the equivalent of the following JAAS file:

KafkaClient {
    com.sun.security.auth.module.Krb5LoginModule required
    useKeyTab=true
    storeKey=true
    keyTab="/etc/security/keytabs/kafka_client.keytab"
    principal="[email protected]";
};

If the topics required already exist on the broker or will be created by an administrator, autocreation can be turned off and only client JAAS properties need to be sent.

Do not mix JAAS configuration files and Spring Boot properties in the same application. If the -Djava.security.auth.login.config system property is already present, Spring Cloud Stream ignores the Spring Boot properties.
Be careful when using the autoCreateTopics and autoAddPartitions with Kerberos. Usually, applications may use principals that do not have administrative rights in Kafka and Zookeeper. Consequently, relying on Spring Cloud Stream to create/modify topics may fail. In secure environments, we strongly recommend creating topics and managing ACLs administratively by using Kafka tooling.
Example: Pausing and Resuming the Consumer

If you wish to suspend consumption but not cause a partition rebalance, you can pause and resume the consumer. This is facilitated by adding the Consumer as a parameter to your @StreamListener. To resume, you need an ApplicationListener for ListenerContainerIdleEvent instances. The frequency at which events are published is controlled by the idleEventInterval property. Since the consumer is not thread-safe, you must call these methods on the calling thread.

The following simple application shows how to pause and resume:

@SpringBootApplication
@EnableBinding(Sink.class)
public class Application {

	public static void main(String[] args) {
		SpringApplication.run(Application.class, args);
	}

	@StreamListener(Sink.INPUT)
	public void in(String in, @Header(KafkaHeaders.CONSUMER) Consumer<?, ?> consumer) {
		System.out.println(in);
		consumer.pause(Collections.singleton(new TopicPartition("myTopic", 0)));
	}

	@Bean
	public ApplicationListener<ListenerContainerIdleEvent> idleListener() {
		return event -> {
			System.out.println(event);
			if (event.getConsumer().paused().size() > 0) {
				event.getConsumer().resume(event.getConsumer().paused());
			}
		};
	}

}

1.4. Transactional Binder

Enable transactions by setting spring.cloud.stream.kafka.binder.transaction.transactionIdPrefix to a non-empty value, e.g. tx-. When used in a processor application, the consumer starts the transaction; any records sent on the consumer thread participate in the same transaction. When the listener exits normally, the listener container will send the offset to the transaction and commit it. A common producer factory is used for all producer bindings configured using spring.cloud.stream.kafka.binder.transaction.producer.* properties; individual binding Kafka producer properties are ignored.

Normal binder retries (and dead lettering) are not supported with transactions because the retries will run in the original transaction, which may be rolled back and any published records will be rolled back too. When retries are enabled (the common property maxAttempts is greater than zero) the retry properties are used to configure a DefaultAfterRollbackProcessor to enable retries at the container level. Similarly, instead of publishing dead-letter records within the transaction, this functionality is moved to the listener container, again via the DefaultAfterRollbackProcessor which runs after the main transaction has rolled back.

If you wish to use transactions in a source application, or from some arbitrary thread for producer-only transaction (e.g. @Scheduled method), you must get a reference to the transactional producer factory and define a KafkaTransactionManager bean using it.

@Bean
public PlatformTransactionManager transactionManager(BinderFactory binders,
        @Value("${unique.tx.id.per.instance}") String txId) {

    ProducerFactory<byte[], byte[]> pf = ((KafkaMessageChannelBinder) binders.getBinder(null,
            MessageChannel.class)).getTransactionalProducerFactory();
    KafkaTransactionManager tm = new KafkaTransactionManager<>(pf);
    tm.setTransactionId(txId)
    return tm;
}

Notice that we get a reference to the binder using the BinderFactory; use null in the first argument when there is only one binder configured. If more than one binder is configured, use the binder name to get the reference. Once we have a reference to the binder, we can obtain a reference to the ProducerFactory and create a transaction manager.

Then you would use normal Spring transaction support, e.g. TransactionTemplate or @Transactional, for example:

public static class Sender {

    @Transactional
    public void doInTransaction(MessageChannel output, List<String> stuffToSend) {
        stuffToSend.forEach(stuff -> output.send(new GenericMessage<>(stuff)));
    }

}

If you wish to synchronize producer-only transactions with those from some other transaction manager, use a ChainedTransactionManager.

If you deploy multiple instances of your application, each instance needs a unique transactionIdPrefix.

1.5. Error Channels

Starting with version 1.3, the binder unconditionally sends exceptions to an error channel for each consumer destination and can also be configured to send async producer send failures to an error channel. See this section on error handling for more information.

The payload of the ErrorMessage for a send failure is a KafkaSendFailureException with properties:

  • failedMessage: The Spring Messaging Message<?> that failed to be sent.

  • record: The raw ProducerRecord that was created from the failedMessage

There is no automatic handling of producer exceptions (such as sending to a Dead-Letter queue). You can consume these exceptions with your own Spring Integration flow.

1.6. Kafka Metrics

Kafka binder module exposes the following metrics:

spring.cloud.stream.binder.kafka.offset: This metric indicates how many messages have not been yet consumed from a given binder’s topic by a given consumer group. The metrics provided are based on the Micrometer library. The binder creates the KafkaBinderMetrics bean if Micrometer is on the classpath and no other such beans provided by the application. The metric contains the consumer group information, topic and the actual lag in committed offset from the latest offset on the topic. This metric is particularly useful for providing auto-scaling feedback to a PaaS platform.

You can exclude KafkaBinderMetrics from creating the necessary infrastructure like consumers and then reporting the metrics by providing the following component in the application.

@Component
class NoOpBindingMeters {
	NoOpBindingMeters(MeterRegistry registry) {
		registry.config().meterFilter(
				MeterFilter.denyNameStartsWith(KafkaBinderMetrics.OFFSET_LAG_METRIC_NAME));
	}
}

More details on how to suppress meters selectively can be found here.

1.7. Tombstone Records (null record values)

When using compacted topics, a record with a null value (also called a tombstone record) represents the deletion of a key. To receive such messages in a @StreamListener method, the parameter must be marked as not required to receive a null value argument.

@StreamListener(Sink.INPUT)
public void in(@Header(KafkaHeaders.RECEIVED_MESSAGE_KEY) byte[] key,
               @Payload(required = false) Customer customer) {
    // customer is null if a tombstone record
    ...
}

1.8. Using a KafkaRebalanceListener

Applications may wish to seek topics/partitions to arbitrary offsets when the partitions are initially assigned, or perform other operations on the consumer. Starting with version 2.1, if you provide a single KafkaRebalanceListener bean in the application context, it will be wired into all Kafka consumer bindings.

public interface KafkaBindingRebalanceListener {

	/**
	 * Invoked by the container before any pending offsets are committed.
	 * @param bindingName the name of the binding.
	 * @param consumer the consumer.
	 * @param partitions the partitions.
	 */
	default void onPartitionsRevokedBeforeCommit(String bindingName, Consumer<?, ?> consumer,
			Collection<TopicPartition> partitions) {

	}

	/**
	 * Invoked by the container after any pending offsets are committed.
	 * @param bindingName the name of the binding.
	 * @param consumer the consumer.
	 * @param partitions the partitions.
	 */
	default void onPartitionsRevokedAfterCommit(String bindingName, Consumer<?, ?> consumer, Collection<TopicPartition> partitions) {

	}

	/**
	 * Invoked when partitions are initially assigned or after a rebalance.
	 * Applications might only want to perform seek operations on an initial assignment.
	 * @param bindingName the name of the binding.
	 * @param consumer the consumer.
	 * @param partitions the partitions.
	 * @param initial true if this is the initial assignment.
	 */
	default void onPartitionsAssigned(String bindingName, Consumer<?, ?> consumer, Collection<TopicPartition> partitions,
			boolean initial) {

	}

}

You cannot set the resetOffsets consumer property to true when you provide a rebalance listener.

1.9. Customizing Consumer and Producer configuration

If you want advanced customization of consumer and producer configuration that is used for creating ConsumerFactory and ProducerFactory in Kafka, you can implement the following customizers.

  • ConsusumerConfigCustomizer

  • ProducerConfigCustomizer

Both of these interfaces provide a way to configure the config map used for consumer and producer properties. For example, if you want to gain access to a bean that is defined at the application level, you can inject that in the implementation of the configure method. When the binder discovers that these customizers are available as beans, it will invoke the configure method right before creating the consumer and producer factories.

Both of these interfaces also provide access to both the binding and destination names so that they can be accessed while customizing producer and consumer properties.

1.10. Dead-Letter Topic Processing

1.10.1. Dead-Letter Topic Partition Selection

By default, records are published to the Dead-Letter topic using the same partition as the original record. This means the Dead-Letter topic must have at least as many partitions as the original record.

To change this behavior, add a DlqPartitionFunction implementation as a @Bean to the application context. Only one such bean can be present. The function is provided with the consumer group, the failed ConsumerRecord and the exception. For example, if you always want to route to partition 0, you might use:

@Bean
public DlqPartitionFunction partitionFunction() {
    return (group, record, ex) -> 0;
}
If you set a consumer binding’s dlqPartitions property to 1 (and the binder’s minPartitionCount is equal to 1), there is no need to supply a DlqPartitionFunction; the framework will always use partition 0. If you set a consumer binding’s dlqPartitions property to a value greater than 1 (or the binder’s minPartitionCount is greater than 1), you must provide a DlqPartitionFunction bean, even if the partition count is the same as the original topic’s.

It is also possible to define a custom name for the DLQ topic. In order to do so, create an implementation of DlqDestinationResolver as a @Bean to the application context. When the binder detects such a bean, that takes precedence, otherwise it will use the dlqName property. If neither of these are found, it will default to error.<destination>.<group>. Here is an example of DlqDestinationResolver as a @Bean.

@Bean
public DlqDestinationResolver dlqDestinationResolver() {
    return (rec, ex) -> {
        if (rec.topic().equals("word1")) {
            return "topic1-dlq";
        }
        else {
            return "topic2-dlq";
        }
    };
}

One important thing to keep in mind when providing an implementation for DlqDestinationResolver is that the provisioner in the binder will not auto create topics for the application. This is because there is no way for the binder to infer the names of all the DLQ topics the implementation might send to. Therefore, if you provide DLQ names using this strategy, it is the application’s responsibility to ensure that those topics are created beforehand.

1.10.2. Handling Records in a Dead-Letter Topic

Because the framework cannot anticipate how users would want to dispose of dead-lettered messages, it does not provide any standard mechanism to handle them. If the reason for the dead-lettering is transient, you may wish to route the messages back to the original topic. However, if the problem is a permanent issue, that could cause an infinite loop. The sample Spring Boot application within this topic is an example of how to route those messages back to the original topic, but it moves them to a “parking lot” topic after three attempts. The application is another spring-cloud-stream application that reads from the dead-letter topic. It exits when no messages are received for 5 seconds.

The examples assume the original destination is so8400out and the consumer group is so8400.

There are a couple of strategies to consider:

  • Consider running the rerouting only when the main application is not running. Otherwise, the retries for transient errors are used up very quickly.

  • Alternatively, use a two-stage approach: Use this application to route to a third topic and another to route from there back to the main topic.

The following code listings show the sample application:

application.properties
spring.cloud.stream.bindings.input.group=so8400replay
spring.cloud.stream.bindings.input.destination=error.so8400out.so8400

spring.cloud.stream.bindings.output.destination=so8400out

spring.cloud.stream.bindings.parkingLot.destination=so8400in.parkingLot

spring.cloud.stream.kafka.binder.configuration.auto.offset.reset=earliest

spring.cloud.stream.kafka.binder.headers=x-retries
Application
@SpringBootApplication
@EnableBinding(TwoOutputProcessor.class)
public class ReRouteDlqKApplication implements CommandLineRunner {

    private static final String X_RETRIES_HEADER = "x-retries";

    public static void main(String[] args) {
        SpringApplication.run(ReRouteDlqKApplication.class, args).close();
    }

    private final AtomicInteger processed = new AtomicInteger();

    @Autowired
    private MessageChannel parkingLot;

    @StreamListener(Processor.INPUT)
    @SendTo(Processor.OUTPUT)
    public Message<?> reRoute(Message<?> failed) {
        processed.incrementAndGet();
        Integer retries = failed.getHeaders().get(X_RETRIES_HEADER, Integer.class);
        if (retries == null) {
            System.out.println("First retry for " + failed);
            return MessageBuilder.fromMessage(failed)
                    .setHeader(X_RETRIES_HEADER, new Integer(1))
                    .setHeader(BinderHeaders.PARTITION_OVERRIDE,
                            failed.getHeaders().get(KafkaHeaders.RECEIVED_PARTITION_ID))
                    .build();
        }
        else if (retries.intValue() < 3) {
            System.out.println("Another retry for " + failed);
            return MessageBuilder.fromMessage(failed)
                    .setHeader(X_RETRIES_HEADER, new Integer(retries.intValue() + 1))
                    .setHeader(BinderHeaders.PARTITION_OVERRIDE,
                            failed.getHeaders().get(KafkaHeaders.RECEIVED_PARTITION_ID))
                    .build();
        }
        else {
            System.out.println("Retries exhausted for " + failed);
            parkingLot.send(MessageBuilder.fromMessage(failed)
                    .setHeader(BinderHeaders.PARTITION_OVERRIDE,
                            failed.getHeaders().get(KafkaHeaders.RECEIVED_PARTITION_ID))
                    .build());
        }
        return null;
    }

    @Override
    public void run(String... args) throws Exception {
        while (true) {
            int count = this.processed.get();
            Thread.sleep(5000);
            if (count == this.processed.get()) {
                System.out.println("Idle, exiting");
                return;
            }
        }
    }

    public interface TwoOutputProcessor extends Processor {

        @Output("parkingLot")
        MessageChannel parkingLot();

    }

}

1.11. Partitioning with the Kafka Binder

Apache Kafka supports topic partitioning natively.

Sometimes it is advantageous to send data to specific partitions — for example, when you want to strictly order message processing (all messages for a particular customer should go to the same partition).

The following example shows how to configure the producer and consumer side:

@SpringBootApplication
@EnableBinding(Source.class)
public class KafkaPartitionProducerApplication {

    private static final Random RANDOM = new Random(System.currentTimeMillis());

    private static final String[] data = new String[] {
            "foo1", "bar1", "qux1",
            "foo2", "bar2", "qux2",
            "foo3", "bar3", "qux3",
            "foo4", "bar4", "qux4",
            };

    public static void main(String[] args) {
        new SpringApplicationBuilder(KafkaPartitionProducerApplication.class)
            .web(false)
            .run(args);
    }

    @InboundChannelAdapter(channel = Source.OUTPUT, poller = @Poller(fixedRate = "5000"))
    public Message<?> generate() {
        String value = data[RANDOM.nextInt(data.length)];
        System.out.println("Sending: " + value);
        return MessageBuilder.withPayload(value)
                .setHeader("partitionKey", value)
                .build();
    }

}
application.yml
spring:
  cloud:
    stream:
      bindings:
        output:
          destination: partitioned.topic
          producer:
            partition-key-expression: headers['partitionKey']
            partition-count: 12
The topic must be provisioned to have enough partitions to achieve the desired concurrency for all consumer groups. The above configuration supports up to 12 consumer instances (6 if their concurrency is 2, 4 if their concurrency is 3, and so on). It is generally best to “over-provision” the partitions to allow for future increases in consumers or concurrency.
The preceding configuration uses the default partitioning (key.hashCode() % partitionCount). This may or may not provide a suitably balanced algorithm, depending on the key values. You can override this default by using the partitionSelectorExpression or partitionSelectorClass properties.

Since partitions are natively handled by Kafka, no special configuration is needed on the consumer side. Kafka allocates partitions across the instances.

The following Spring Boot application listens to a Kafka stream and prints (to the console) the partition ID to which each message goes:

@SpringBootApplication
@EnableBinding(Sink.class)
public class KafkaPartitionConsumerApplication {

    public static void main(String[] args) {
        new SpringApplicationBuilder(KafkaPartitionConsumerApplication.class)
            .web(false)
            .run(args);
    }

    @StreamListener(Sink.INPUT)
    public void listen(@Payload String in, @Header(KafkaHeaders.RECEIVED_PARTITION_ID) int partition) {
        System.out.println(in + " received from partition " + partition);
    }

}
application.yml
spring:
  cloud:
    stream:
      bindings:
        input:
          destination: partitioned.topic
          group: myGroup

You can add instances as needed. Kafka rebalances the partition allocations. If the instance count (or instance count * concurrency) exceeds the number of partitions, some consumers are idle.

2. Kafka Streams Binder

2.1. Usage

For using the Kafka Streams binder, you just need to add it to your Spring Cloud Stream application, using the following maven coordinates:

<dependency>
  <groupId>org.springframework.cloud</groupId>
  <artifactId>spring-cloud-stream-binder-kafka-streams</artifactId>
</dependency>

A quick way to bootstrap a new project for Kafka Streams binder is to use Spring Initializr and then select "Cloud Streams" and "Spring for Kafka Streams" as shown below

spring initializr kafka streams

2.2. Overview

Spring Cloud Stream includes a binder implementation designed explicitly for Apache Kafka Streams binding. With this native integration, a Spring Cloud Stream "processor" application can directly use the Apache Kafka Streams APIs in the core business logic.

Kafka Streams binder implementation builds on the foundations provided by the Spring for Apache Kafka project.

Kafka Streams binder provides binding capabilities for the three major types in Kafka Streams - KStream, KTable and GlobalKTable.

Kafka Streams applications typically follow a model in which the records are read from an inbound topic, apply business logic, and then write the transformed records to an outbound topic. Alternatively, a Processor application with no outbound destination can be defined as well.

In the following sections, we are going to look at the details of Spring Cloud Stream’s integration with Kafka Streams.

2.3. Programming Model

When using the programming model provided by Kafka Streams binder, both the high-level Streams DSL and a mix of both the higher level and the lower level Processor-API can be used as options. When mixing both higher and lower level API’s, this is usually achieved by invoking transform or process API methods on KStream.

2.3.1. Functional Style

Starting with Spring Cloud Stream 3.0.0, Kafka Streams binder allows the applications to be designed and developed using the functional programming style that is available in Java 8. This means that the applications can be concisely represented as a lambda expression of types java.util.function.Function or java.util.function.Consumer.

Let’s take a very basic example.

@SpringBootApplication
public class SimpleConsumerApplication {

    @Bean
    public java.util.function.Consumer<KStream<Object, String>> process() {

        return input ->
                input.foreach((key, value) -> {
                    System.out.println("Key: " + key + " Value: " + value);
                });
    }
}

Albeit simple, this is a complete standalone Spring Boot application that is leveraging Kafka Streams for stream processing. This is a consumer application with no outbound binding and only a single inbound binding. The application consumes data and it simply logs the information from the KStream key and value on the standard output. The application contains the SpringBootApplication annotation and a method that is marked as Bean. The bean method is of type java.util.function.Consumer which is parameterized with KStream. Then in the implementation, we are returning a Consumer object that is essentially a lambda expression. Inside the lambda expression, the code for processing the data is provided.

In this application, there is a single input binding that is of type KStream. The binder creates this binding for the application with a name process-in-0, i.e. the name of the function bean name followed by a dash character (-) and the literal in followed by another dash and then the ordinal position of the parameter. You use this binding name to set other properties such as destination. For example, spring.cloud.stream.bindings.process-in-0.destination=my-topic.

If the destination property is not set on the binding, a topic is created with the same name as the binding (if there are sufficient privileges for the application) or that topic is expected to be already available.

Once built as a uber-jar (e.g., kstream-consumer-app.jar), you can run the above example like the following.

java -jar kstream-consumer-app.jar --spring.cloud.stream.bindings.process-in-0.destination=my-topic

Here is another example, where it is a full processor with both input and output bindings. This is the classic word-count example in which the application receives data from a topic, the number of occurrences for each word is then computed in a tumbling time-window.

@SpringBootApplication
public class WordCountProcessorApplication {

  @Bean
  public Function<KStream<Object, String>, KStream<?, WordCount>> process() {

    return input -> input
                .flatMapValues(value -> Arrays.asList(value.toLowerCase().split("\\W+")))
                .map((key, value) -> new KeyValue<>(value, value))
                .groupByKey(Serialized.with(Serdes.String(), Serdes.String()))
                .windowedBy(TimeWindows.of(5000))
                .count(Materialized.as("word-counts-state-store"))
                .toStream()
                .map((key, value) -> new KeyValue<>(key.key(), new WordCount(key.key(), value,
                        new Date(key.window().start()), new Date(key.window().end()))));
  }

	public static void main(String[] args) {
		SpringApplication.run(WordCountProcessorApplication.class, args);
	}
}

Here again, this is a complete Spring Boot application. The difference here from the first application is that the bean method is of type java.util.function.Function. The first parameterized type for the Function is for the input KStream and the second one is for the output. In the method body, a lambda expression is provided that is of type Function and as implementation, the actual business logic is given. Similar to the previously discussed Consumer based application, the input binding here is named as process-in-0 by default. For the output, the binding name is automatically also set to process-out-0.

Once built as an uber-jar (e.g., wordcount-processor.jar), you can run the above example like the following.

java -jar wordcount-processor.jar --spring.cloud.stream.bindings.process-in-0.destination=words --spring.cloud.stream.bindings.process-out-0.destination=counts

This application will consume messages from the Kafka topic words and the computed results are published to an output topic counts.

Spring Cloud Stream will ensure that the messages from both the incoming and outgoing topics are automatically bound as KStream objects. As a developer, you can exclusively focus on the business aspects of the code, i.e. writing the logic required in the processor. Setting up Kafka Streams specific configuration required by the Kafka Streams infrastructure is automatically handled by the framework.

The two examples we saw above have a single KStream input binding. In both cases, the bindings received the records from a single topic. If you want to multiplex multiple topics into a single KStream binding, you can provide comma separated Kafka topics as destinations below.

spring.cloud.stream.bindings.process-in-0.destination=topic-1,topic-2,topic-3

In addition, you can also provide topic patterns as destinations if you want to match topics against a regular exression.

spring.cloud.stream.bindings.process-in-0.destination=input.*

Multiple Input Bindings

Many non-trivial Kafka Streams applications often consume data from more than one topic through multiple bindings. For instance, one topic is consumed as Kstream and another as KTable or GlobalKTable. There are many reasons why an application might want to receive data as a table type. Think of a use-case where the underlying topic is populated through a change data capture (CDC) mechanism from a database or perhaps the application only cares about the latest updates for downstream processing. If the application specifies that the data needs to be bound as KTable or GlobalKTable, then Kafka Streams binder will properly bind the destination to a KTable or GlobalKTable and make them available for the application to operate upon. We will look at a few different scenarios how multiple input bindings are handled in the Kafka Streams binder.

BiFunction in Kafka Streams Binder

Here is an example where we have two inputs and an output. In this case, the application can leverage on java.util.function.BiFunction.

@Bean
public BiFunction<KStream<String, Long>, KTable<String, String>, KStream<String, Long>> process() {
    return (userClicksStream, userRegionsTable) -> (userClicksStream
            .leftJoin(userRegionsTable, (clicks, region) -> new RegionWithClicks(region == null ?
                            "UNKNOWN" : region, clicks),
                    Joined.with(Serdes.String(), Serdes.Long(), null))
            .map((user, regionWithClicks) -> new KeyValue<>(regionWithClicks.getRegion(),
                    regionWithClicks.getClicks()))
            .groupByKey(Grouped.with(Serdes.String(), Serdes.Long()))
            .reduce(Long::sum)
            .toStream());
}

Here again, the basic theme is the same as in the previous examples, but here we have two inputs. Java’s BiFunction support is used to bind the inputs to the desired destinations. The default binding names generated by the binder for the inputs are process-in-0 and process-in-1 respectively. The default output binding is process-out-0. In this example, the first parameter of BiFunction is bound as a KStream for the first input and the second parameter is bound as a KTable for the second input.

BiConsumer in Kafka Streams Binder

If there are two inputs, but no outputs, in that case we can use java.util.function.BiConsumer as shown below.

@Bean
public BiConsumer<KStream<String, Long>, KTable<String, String>> process() {
    return (userClicksStream, userRegionsTable) -> {}
}
Beyond two inputs

What if you have more than two inputs? There are situations in which you need more than two inputs. In that case, the binder allows you to chain partial functions. In functional programming jargon, this technique is generally known as currying. With the functional programming support added as part of Java 8, Java now enables you to write curried functions. Spring Cloud Stream Kafka Streams binder can make use of this feature to enable multiple input bindings.

Let’s see an example.

@Bean
public Function<KStream<Long, Order>,
        Function<GlobalKTable<Long, Customer>,
                Function<GlobalKTable<Long, Product>, KStream<Long, EnrichedOrder>>>> enrichOrder() {

    return orders -> (
              customers -> (
                    products -> (
                        orders.join(customers,
                            (orderId, order) -> order.getCustomerId(),
                                (order, customer) -> new CustomerOrder(customer, order))
                                .join(products,
                                        (orderId, customerOrder) -> customerOrder
                                                .productId(),
                                        (customerOrder, product) -> {
                                            EnrichedOrder enrichedOrder = new EnrichedOrder();
                                            enrichedOrder.setProduct(product);
                                            enrichedOrder.setCustomer(customerOrder.customer);
                                            enrichedOrder.setOrder(customerOrder.order);
                                            return enrichedOrder;
                                        })
                        )
                )
    );
}

Let’s look at the details of the binding model presented above. In this model, we have 3 partially applied functions on the inbound. Let’s call them as f(x), f(y) and f(z). If we expand these functions in the sense of true mathematical functions, it will look like these: f(x) → (fy) → f(z) → KStream<Long, EnrichedOrder>. The x variable stands for KStream<Long, Order>, the y variable stands for GlobalKTable<Long, Customer> and the z variable stands for GlobalKTable<Long, Product>. The first function f(x) has the first input binding of the application (KStream<Long, Order>) and its output is the function, f(y). The function f(y) has the second input binding for the application (GlobalKTable<Long, Customer>) and its output is yet another function, f(z). The input for the function f(z) is the third input for the application (GlobalKTable<Long, Product>) and its output is KStream<Long, EnrichedOrder> which is the final output binding for the application. The input from the three partial functions which are KStream, GlobalKTable, GlobalKTable respectively are available for you in the method body for implementing the business logic as part of the lambda expression.

Input bindings are named as enrichOrder-in-0, enrichOrder-in-1 and enrichOrder-in-2 respectively. Output binding is named as enrichOrder-out-0.

With curried functions, you can virtually have any number of inputs. However, keep in mind that, anything more than a smaller number of inputs and partially applied functions for them as above in Java might lead to unreadable code. Therefore if your Kafka Streams application requires more than a reasonably smaller number of input bindings and you want to use this functional model, then you may want to rethink your design and decompose the application appropriately.

Multiple Output Bindings

Kafka Streams allows to write outbound data into multiple topics. This feature is known as branching in Kafka Streams. When using multiple output bindings, you need to provide an array of KStream (KStream[]) as the outbound return type.

Here is an example:

@Bean
public Function<KStream<Object, String>, KStream<?, WordCount>[]> process() {

    Predicate<Object, WordCount> isEnglish = (k, v) -> v.word.equals("english");
    Predicate<Object, WordCount> isFrench = (k, v) -> v.word.equals("french");
    Predicate<Object, WordCount> isSpanish = (k, v) -> v.word.equals("spanish");

    return input -> input
            .flatMapValues(value -> Arrays.asList(value.toLowerCase().split("\\W+")))
            .groupBy((key, value) -> value)
            .windowedBy(TimeWindows.of(5000))
            .count(Materialized.as("WordCounts-branch"))
            .toStream()
            .map((key, value) -> new KeyValue<>(null, new WordCount(key.key(), value,
                    new Date(key.window().start()), new Date(key.window().end()))))
            .branch(isEnglish, isFrench, isSpanish);
}

The programming model remains the same, however the outbound parameterized type is KStream[]. The default output binding names are process-out-0, process-out-1, process-out-2 respectively. The reason why the binder generates three output bindings is because it detects the length of the returned KStream array.

Summary of Function based Programming Styles for Kafka Streams

In summary, the following table shows the various options that can be used in the functional paradigm.

Number of Inputs Number of Outputs Component to use

1

0

java.util.function.Consumer

2

0

java.util.function.BiConsumer

1

1..n

java.util.function.Function

2

1..n

java.util.function.BiFunction

>= 3

0..n

Use curried functions

  • In the case of more than one output in this table, the type simply becomes KStream[].

2.3.2. Imperative programming model.

Starting with 3.1.0 version of the binder, we recommend using the functional programming model described above for Kafka Streams binder based applications. The support for StreamListener is deprecated starting with 3.1.0 of Spring Cloud Stream. Below, we are providing some details on the StreamListener based Kafka Streams processors as a reference.

Following is the equivalent of the Word count example using StreamListener.

@SpringBootApplication
@EnableBinding(KafkaStreamsProcessor.class)
public class WordCountProcessorApplication {

    @StreamListener("input")
    @SendTo("output")
    public KStream<?, WordCount> process(KStream<?, String> input) {
        return input
                .flatMapValues(value -> Arrays.asList(value.toLowerCase().split("\\W+")))
                .groupBy((key, value) -> value)
                .windowedBy(TimeWindows.of(5000))
                .count(Materialized.as("WordCounts-multi"))
                .toStream()
                .map((key, value) -> new KeyValue<>(null, new WordCount(key.key(), value, new Date(key.window().start()), new Date(key.window().end()))));
    }

    public static void main(String[] args) {
        SpringApplication.run(WordCountProcessorApplication.class, args);
    }

As you can see, this is a bit more verbose since you need to provide EnableBinding and the other extra annotations like StreamListener and SendTo to make it a complete application. EnableBinding is where you specify your binding interface that contains your bindings. In this case, we are using the stock KafkaStreamsProcessor binding interface that has the following contracts.

public interface KafkaStreamsProcessor {

	@Input("input")
	KStream<?, ?> input();

	@Output("output")
	KStream<?, ?> output();

}

Binder will create bindings for the input KStream and output KStream since you are using a binding interface that contains those declarations.

In addition to the obvious differences in the programming model offered in the functional style, one particular thing that needs to be mentioned here is that the binding names are what you specify in the binding interface. For example, in the above application, since we are using KafkaStreamsProcessor, the binding names are input and output. Binding properties need to use those names. For instance spring.cloud.stream.bindings.input.destination, spring.cloud.stream.bindings.output.destination etc. Keep in mind that this is fundamentally different from the functional style since there the binder generates binding names for the application. This is because the application does not provide any binding interfaces in the functional model using EnableBinding.

Here is another example of a sink where we have two inputs.

@EnableBinding(KStreamKTableBinding.class)
.....
.....
@StreamListener
public void process(@Input("inputStream") KStream<String, PlayEvent> playEvents,
                    @Input("inputTable") KTable<Long, Song> songTable) {
                    ....
                    ....
}

interface KStreamKTableBinding {

    @Input("inputStream")
    KStream<?, ?> inputStream();

    @Input("inputTable")
    KTable<?, ?> inputTable();
}

Following is the StreamListener equivalent of the same BiFunction based processor that we saw above.

@EnableBinding(KStreamKTableBinding.class)
....
....

@StreamListener
@SendTo("output")
public KStream<String, Long> process(@Input("input") KStream<String, Long> userClicksStream,
                                     @Input("inputTable") KTable<String, String> userRegionsTable) {
....
....
}

interface KStreamKTableBinding extends KafkaStreamsProcessor {

    @Input("inputX")
    KTable<?, ?> inputTable();
}

Finally, here is the StreamListener equivalent of the application with three inputs and curried functions.

@EnableBinding(CustomGlobalKTableProcessor.class)
...
...
    @StreamListener
    @SendTo("output")
    public KStream<Long, EnrichedOrder> process(
            @Input("input-1") KStream<Long, Order> ordersStream,
            @Input("input-2") GlobalKTable<Long, Customer> customers,
            @Input("input-3") GlobalKTable<Long, Product> products) {

        KStream<Long, CustomerOrder> customerOrdersStream = ordersStream.join(
                customers, (orderId, order) -> order.getCustomerId(),
                (order, customer) -> new CustomerOrder(customer, order));

        return customerOrdersStream.join(products,
                (orderId, customerOrder) -> customerOrder.productId(),
                (customerOrder, product) -> {
                    EnrichedOrder enrichedOrder = new EnrichedOrder();
                    enrichedOrder.setProduct(product);
                    enrichedOrder.setCustomer(customerOrder.customer);
                    enrichedOrder.setOrder(customerOrder.order);
                    return enrichedOrder;
                });
        }

    interface CustomGlobalKTableProcessor {

            @Input("input-1")
            KStream<?, ?> input1();

            @Input("input-2")
            GlobalKTable<?, ?> input2();

            @Input("input-3")
            GlobalKTable<?, ?> input3();

            @Output("output")
            KStream<?, ?> output();
    }

You might notice that the above two examples are even more verbose since in addition to provide EnableBinding, you also need to write your own custom binding interface as well. Using the functional model, you can avoid all those ceremonial details.

Before we move on from looking at the general programming model offered by Kafka Streams binder, here is the StreamListener version of multiple output bindings.

EnableBinding(KStreamProcessorWithBranches.class)
public static class WordCountProcessorApplication {

    @Autowired
    private TimeWindows timeWindows;

    @StreamListener("input")
    @SendTo({"output1","output2","output3"})
    public KStream<?, WordCount>[] process(KStream<Object, String> input) {

			Predicate<Object, WordCount> isEnglish = (k, v) -> v.word.equals("english");
			Predicate<Object, WordCount> isFrench =  (k, v) -> v.word.equals("french");
			Predicate<Object, WordCount> isSpanish = (k, v) -> v.word.equals("spanish");

			return input
					.flatMapValues(value -> Arrays.asList(value.toLowerCase().split("\\W+")))
					.groupBy((key, value) -> value)
					.windowedBy(timeWindows)
					.count(Materialized.as("WordCounts-1"))
					.toStream()
					.map((key, value) -> new KeyValue<>(null, new WordCount(key.key(), value, new Date(key.window().start()), new Date(key.window().end()))))
					.branch(isEnglish, isFrench, isSpanish);
    }

    interface KStreamProcessorWithBranches {

    		@Input("input")
    		KStream<?, ?> input();

    		@Output("output1")
    		KStream<?, ?> output1();

    		@Output("output2")
    		KStream<?, ?> output2();

    		@Output("output3")
    		KStream<?, ?> output3();
    	}
}

To recap, we have reviewed the various programming model choices when using the Kafka Streams binder.

The binder provides binding capabilities for KStream, KTable and GlobalKTable on the input. KTable and GlobalKTable bindings are only available on the input. Binder supports both input and output bindings for KStream.

The upshot of the programming model of Kafka Streams binder is that the binder provides you the flexibility of going with a fully functional programming model or using the StreamListener based imperative approach.

2.4. Ancillaries to the programming model

2.4.1. Multiple Kafka Streams processors within a single application

Binder allows to have multiple Kafka Streams processors within a single Spring Cloud Stream application. You can have an application as below.

@Bean
public java.util.function.Function<KStream<Object, String>, KStream<Object, String>> process() {
   ...
}

@Bean
public java.util.function.Consumer<KStream<Object, String>> anotherProcess() {
  ...
}

@Bean
public java.util.function.BiFunction<KStream<Object, String>, KTable<Integer, String>, KStream<Object, String>> yetAnotherProcess() {
   ...
}

In this case, the binder will create 3 separate Kafka Streams objects with different application ID’s (more on this below). However, if you have more than one processor in the application, you have to tell Spring Cloud Stream, which functions need to be activated. Here is how you activate the functions.

spring.cloud.stream.function.definition: process;anotherProcess;yetAnotherProcess

If you want certain functions to be not activated right away, you can remove that from this list.

This is also true when you have a single Kafka Streams processor and other types of Function beans in the same application that is handled through a different binder (for e.g., a function bean that is based on the regular Kafka Message Channel binder)

2.4.2. Kafka Streams Application ID

Application id is a mandatory property that you need to provide for a Kafka Streams application. Spring Cloud Stream Kafka Streams binder allows you to configure this application id in multiple ways.

If you only have one single processor or StreamListener in the application, then you can set this at the binder level using the following property:

spring.cloud.stream.kafka.streams.binder.applicationId.

As a convenience, if you only have a single processor, you can also use spring.application.name as the property to delegate the application id.

If you have multiple Kafka Streams processors in the application, then you need to set the application id per processor. In the case of the functional model, you can attach it to each function as a property.

For e.g. imagine that you have the following functions.

@Bean
public java.util.function.Consumer<KStream<Object, String>> process() {
   ...
}

and

@Bean
public java.util.function.Consumer<KStream<Object, String>> anotherProcess() {
  ...
}

Then you can set the application id for each, using the following binder level properties.

spring.cloud.stream.kafka.streams.binder.functions.process.applicationId

and

spring.cloud.stream.kafka.streams.binder.functions.anotherProcess.applicationId

In the case of StreamListener, you need to set this on the first input binding on the processor.

For e.g. imagine that you have the following two StreamListener based processors.

@StreamListener
@SendTo("output")
public KStream<String, String> process(@Input("input") <KStream<Object, String>> input) {
   ...
}

@StreamListener
@SendTo("anotherOutput")
public KStream<String, String> anotherProcess(@Input("anotherInput") <KStream<Object, String>> input) {
   ...
}

Then you must set the application id for this using the following binding property.

spring.cloud.stream.kafka.streams.bindings.input.consumer.applicationId

and

spring.cloud.stream.kafka.streams.bindings.anotherInput.consumer.applicationId

For function based model also, this approach of setting application id at the binding level will work. However, setting per function at the binder level as we have seen above is much easier if you are using the functional model.

For production deployments, it is highly recommended to explicitly specify the application ID through configuration. This is especially going to be very critical if you are auto scaling your application in which case you need to make sure that you are deploying each instance with the same application ID.

If the application does not provide an application ID, then in that case the binder will auto generate a static application ID for you. This is convenient in development scenarios as it avoids the need for explicitly providing the application ID. The generated application ID in this manner will be static over application restarts. In the case of functional model, the generated application ID will be the function bean name followed by the literal applicationID, for e.g process-applicationID if process if the function bean name. In the case of StreamListener, instead of using the function bean name, the generated application ID will be use the containing class name followed by the method name followed by the literal applicationId.

Summary of setting Application ID
  • By default, binder will auto generate the application ID per function or StreamListener methods.

  • If you have a single processor, then you can use spring.kafka.streams.applicationId, spring.application.name or spring.cloud.stream.kafka.streams.binder.applicationId.

  • If you have multiple processors, then application ID can be set per function using the property - spring.cloud.stream.kafka.streams.binder.functions.<function-name>.applicationId. In the case of StreamListener, this can be done using spring.cloud.stream.kafka.streams.bindings.input.applicationId, assuming that the input binding name is input.

2.4.3. Overriding the default binding names generated by the binder with the functional style

By default, the binder uses the strategy discussed above to generate the binding name when using the functional style, i.e. <function-bean-name>-<in>|<out>-[0..n], for e.g. process-in-0, process-out-0 etc. If you want to override those binding names, you can do that by specifying the following properties.

spring.cloud.stream.function.bindings.<default binding name>. Default binding name is the original binding name generated by the binder.

For e.g. lets say, you have this function.

@Bean
public BiFunction<KStream<String, Long>, KTable<String, String>, KStream<String, Long>> process() {
...
}

Binder will generate bindings with names, process-in-0, process-in-1 and process-out-0. Now, if you want to change them to something else completely, maybe more domain specific binding names, then you can do so as below.

spring.cloud.stream.function.bindings.process-in-0=users

spring.cloud.stream.function.bindings.process-in-0=regions

and

spring.cloud.stream.function.bindings.process-out-0=clicks

After that, you must set all the binding level properties on these new binding names.

Please keep in mind that with the functional programming model described above, adhering to the default binding names make sense in most situations. The only reason you may still want to do this overriding is when you have larger number of configuration properties and you want to map the bindings to something more domain friendly.

2.4.4. Setting up bootstrap server configuration

When running Kafka Streams applications, you must provide the Kafka broker server information. If you don’t provide this information, the binder expects that you are running the broker at the default localhost:9092. If that is not the case, then you need to override that. There are a couple of ways to do that.

  • Using the boot property - spring.kafka.bootstrapServers

  • Binder level property - spring.cloud.stream.kafka.streams.binder.brokers

When it comes to the binder level property, it doesn’t matter if you use the broker property provided through the regular Kafka binder - spring.cloud.stream.kafka.binder.brokers. Kafka Streams binder will first check if Kafka Streams binder specific broker property is set (spring.cloud.stream.kafka.streams.binder.brokers) and if not found, it looks for spring.cloud.stream.kafka.binder.brokers.

2.5. Record serialization and deserialization

Kafka Streams binder allows you to serialize and deserialize records in two ways. One is the native serialization and deserialization facilities provided by Kafka and the other one is the message conversion capabilities of Spring Cloud Stream framework. Lets look at some details.

2.5.1. Inbound deserialization

Keys are always deserialized using native Serdes.

For values, by default, deserialization on the inbound is natively performed by Kafka. Please note that this is a major change on default behavior from previous versions of Kafka Streams binder where the deserialization was done by the framework.

Kafka Streams binder will try to infer matching Serde types by looking at the type signature of java.util.function.Function|Consumer or StreamListener. Here is the order that it matches the Serdes.

  • If the application provides a bean of type Serde and if the return type is parameterized with the actual type of the incoming key or value type, then it will use that Serde for inbound deserialization. For e.g. if you have the following in the application, the binder detects that the incoming value type for the KStream matches with a type that is parameterized on a Serde bean. It will use that for inbound deserialization.

@Bean
public Serde<Foo() customSerde{
 ...
}

@Bean
public Function<KStream<String, Foo>, KStream<String, Foo>> process() {
}
  • Next, it looks at the types and see if they are one of the types exposed by Kafka Streams. If so, use them. Here are the Serde types that the binder will try to match from Kafka Streams.

    Integer, Long, Short, Double, Float, byte[], UUID and String.
  • If none of the Serdes provided by Kafka Streams don’t match the types, then it will use JsonSerde provided by Spring Kafka. In this case, the binder assumes that the types are JSON friendly. This is useful if you have multiple value objects as inputs since the binder will internally infer them to correct Java types. Before falling back to the JsonSerde though, the binder checks at the default Serde`s set in the Kafka Streams configuration to see if it is a `Serde that it can match with the incoming KStream’s types.

If none of the above strategies worked, then the applications must provide the `Serde`s through configuration. This can be configured in two ways - binding or default.

First the binder will look if a Serde is provided at the binding level. For e.g. if you have the following processor,

@Bean
public BiFunction<KStream<CustomKey, AvroIn1>, KTable<CustomKey, AvroIn2>, KStream<CustomKey, AvroOutput>> process() {...}

then, you can provide a binding level Serde using the following:

spring.cloud.stream.kafka.streams.bindings.process-in-0.consumer.keySerde=CustomKeySerde
spring.cloud.stream.kafka.streams.bindings.process-in-0.consumer.valueSerde=io.confluent.kafka.streams.serdes.avro.SpecificAvroSerde

spring.cloud.stream.kafka.streams.bindings.process-in-1.consumer.keySerde=CustomKeySerde
spring.cloud.stream.kafka.streams.bindings.process-in-1.consumer.valueSerde=io.confluent.kafka.streams.serdes.avro.SpecificAvroSerde
If you provide Serde as abover per input binding, then that will takes higher precedence and the binder will stay away from any Serde inference.

If you want the default key/value Serdes to be used for inbound deserialization, you can do so at the binder level.

spring.cloud.stream.kafka.streams.binder.configuration.default.key.serde
spring.cloud.stream.kafka.streams.binder.configuration.default.value.serde

If you don’t want the native decoding provided by Kafka, you can rely on the message conversion features that Spring Cloud Stream provides. Since native decoding is the default, in order to let Spring Cloud Stream deserialize the inbound value object, you need to explicitly disable native decoding.

For e.g. if you have the same BiFunction processor as above, then spring.cloud.stream.bindings.process-in-0.consumer.nativeDecoding: false You need to disable native decoding for all the inputs individually. Otherwise, native decoding will still be applied for those you do not disable.

By default, Spring Cloud Stream will use application/json as the content type and use an appropriate json message converter. You can use custom message converters by using the following property and an appropriate MessageConverter bean.

spring.cloud.stream.bindings.process-in-0.contentType

2.5.2. Outbound serialization

Outbound serialization pretty much follows the same rules as above for inbound deserialization. As with the inbound deserialization, one major change from the previous versions of Spring Cloud Stream is that the serialization on the outbound is handled by Kafka natively. Before 3.0 versions of the binder, this was done by the framework itself.

Keys on the outbound are always serialized by Kafka using a matching Serde that is inferred by the binder. If it can’t infer the type of the key, then that needs to be specified using configuration.

Value serdes are inferred using the same rules used for inbound deserialization. First it matches to see if the outbound type is from a provided bean in the application. If not, it checks to see if it matches with a Serde exposed by Kafka such as - Integer, Long, Short, Double, Float, byte[], UUID and String. If that doesnt’t work, then it falls back to JsonSerde provided by the Spring Kafka project, but first look at the default Serde configuration to see if there is a match. Keep in mind that all these happen transparently to the application. If none of these work, then the user has to provide the Serde to use by configuration.

Lets say you are using the same BiFunction processor as above. Then you can configure outbound key/value Serdes as following.

spring.cloud.stream.kafka.streams.bindings.process-out-0.producer.keySerde=CustomKeySerde
spring.cloud.stream.kafka.streams.bindings.process-out-0.producer.valueSerde=io.confluent.kafka.streams.serdes.avro.SpecificAvroSerde

If Serde inference fails, and no binding level Serdes are provided, then the binder falls back to the JsonSerde, but look at the default Serdes for a match.

Default serdes are configured in the same way as above where it is described under deserialization.

spring.cloud.stream.kafka.streams.binder.configuration.default.key.serde spring.cloud.stream.kafka.streams.binder.configuration.default.value.serde

If your application uses the branching feature and has multiple output bindings, then these have to be configured per binding. Once again, if the binder is capable of inferring the Serde types, you don’t need to do this configuration.

If you don’t want the native encoding provided by Kafka, but want to use the framework provided message conversion, then you need to explicitly disable native encoding since since native encoding is the default. For e.g. if you have the same BiFunction processor as above, then spring.cloud.stream.bindings.process-out-0.producer.nativeEncoding: false You need to disable native encoding for all the output individually in the case of branching. Otherwise, native encoding will still be applied for those you don’t disable.

When conversion is done by Spring Cloud Stream, by default, it will use application/json as the content type and use an appropriate json message converter. You can use custom message converters by using the following property and a corresponding MessageConverter bean.

spring.cloud.stream.bindings.process-out-0.contentType

When native encoding/decoding is disabled, binder will not do any inference as in the case of native Serdes. Applications need to explicitly provide all the configuration options. For that reason, it is generally advised to stay with the default options for de/serialization and stick with native de/serialization provided by Kafka Streams when you write Spring Cloud Stream Kafka Streams applications. The one scenario in which you must use message conversion capabilities provided by the framework is when your upstream producer is using a specific serialization strategy. In that case, you want to use a matching deserialization strategy as native mechanisms may fail. When relying on the default Serde mechanism, the applications must ensure that the binder has a way forward with correctly map the inbound and outbound with a proper Serde, as otherwise things might fail.

It is worth to mention that the data de/serialization approaches outlined above are only applicable on the edges of your processors, i.e. - inbound and outbound. Your business logic might still need to call Kafka Streams API’s that explicitly need Serde objects. Those are still the responsibility of the application and must be handled accordingly by the developer.

2.6. Error Handling

Apache Kafka Streams provides the capability for natively handling exceptions from deserialization errors. For details on this support, please see this. Out of the box, Apache Kafka Streams provides two kinds of deserialization exception handlers - LogAndContinueExceptionHandler and LogAndFailExceptionHandler. As the name indicates, the former will log the error and continue processing the next records and the latter will log the error and fail. LogAndFailExceptionHandler is the default deserialization exception handler.

2.6.1. Handling Deserialization Exceptions in the Binder

Kafka Streams binder allows to specify the deserialization exception handlers above using the following property.

spring.cloud.stream.kafka.streams.binder.deserializationExceptionHandler: logAndContinue

or

spring.cloud.stream.kafka.streams.binder.deserializationExceptionHandler: logAndFail

In addition to the above two deserialization exception handlers, the binder also provides a third one for sending the erroneous records (poison pills) to a DLQ (dead letter queue) topic. Here is how you enable this DLQ exception handler.

spring.cloud.stream.kafka.streams.binder.deserializationExceptionHandler: sendToDlq

When the above property is set, all the records in deserialization error are automatically sent to the DLQ topic.

You can set the topic name where the DLQ messages are published as below.

You can provide an implementation for DlqDestinationResolver which is a functional interface. DlqDestinationResolver takes ConsumerRecord and the exception as inputs and then allows to specify a topic name as the output. By gaining access to the Kafka ConsumerRecord, the header records can be introspected in the implementation of the BiFunction.

Here is an example of providing an implementation for DlqDestinationResolver.

@Bean
public DlqDestinationResolver dlqDestinationResolver() {
    return (rec, ex) -> {
        if (rec.topic().equals("word1")) {
            return "topic1-dlq";
        }
        else {
            return "topic2-dlq";
        }
    };
}

One important thing to keep in mind when providing an implementation for DlqDestinationResolver is that the provisioner in the binder will not auto create topics for the application. This is because there is no way for the binder to infer the names of all the DLQ topics the implementation might send to. Therefore, if you provide DLQ names using this strategy, it is the application’s responsibility to ensure that those topics are created beforehand.

If DlqDestinationResolver is present in the application as a bean, that takes higher prcedence. If you do not want to follow this approach and rather provide a static DLQ name using configuration, you can set the following property.

spring.cloud.stream.kafka.streams.bindings.process-in-0.consumer.dlqName: custom-dlq (Change the binding name accordingly)

If this is set, then the error records are sent to the topic custom-dlq. If the application is not using either of the above strategies, then it will create a DLQ topic with the name error.<input-topic-name>.<application-id>. For instance, if your binding’s destination topic is inputTopic and the application ID is process-applicationId, then the default DLQ topic is error.inputTopic.process-applicationId. It is always recommended to explicitly create a DLQ topic for each input binding if it is your intention to enable DLQ.

2.6.2. DLQ per input consumer binding

The property spring.cloud.stream.kafka.streams.binder.deserializationExceptionHandler is applicable for the entire application. This implies that if there are multiple functions or StreamListener methods in the same application, this property is applied to all of them. However, if you have multiple processors or multiple input bindings within a single processor, then you can use the finer-grained DLQ control that the binder provides per input consumer binding.

If you have the following processor,

@Bean
public BiFunction<KStream<String, Long>, KTable<String, String>, KStream<String, Long>> process() {
...
}

and you only want to enable DLQ on the first input binding and logAndSkip on the second binding, then you can do so on the consumer as below.

spring.cloud.stream.kafka.streams.bindings.process-in-0.consumer.deserializationExceptionHandler: sendToDlq spring.cloud.stream.kafka.streams.bindings.process-in-1.consumer.deserializationExceptionHandler: logAndSkip

Setting deserialization exception handlers this way has a higher precedence than setting at the binder level.

2.6.3. DLQ partitioning

By default, records are published to the Dead-Letter topic using the same partition as the original record. This means the Dead-Letter topic must have at least as many partitions as the original record.

To change this behavior, add a DlqPartitionFunction implementation as a @Bean to the application context. Only one such bean can be present. The function is provided with the consumer group (which is the same as the application ID in most situations), the failed ConsumerRecord and the exception. For example, if you always want to route to partition 0, you might use:

@Bean
public DlqPartitionFunction partitionFunction() {
    return (group, record, ex) -> 0;
}
If you set a consumer binding’s dlqPartitions property to 1 (and the binder’s minPartitionCount is equal to 1), there is no need to supply a DlqPartitionFunction; the framework will always use partition 0. If you set a consumer binding’s dlqPartitions property to a value greater than 1 (or the binder’s minPartitionCount is greater than 1), you must provide a DlqPartitionFunction bean, even if the partition count is the same as the original topic’s.

A couple of things to keep in mind when using the exception handling feature in Kafka Streams binder.

  • The property spring.cloud.stream.kafka.streams.binder.deserializationExceptionHandler is applicable for the entire application. This implies that if there are multiple functions or StreamListener methods in the same application, this property is applied to all of them.

  • The exception handling for deserialization works consistently with native deserialization and framework provided message conversion.

2.6.4. Handling Production Exceptions in the Binder

Unlike the support for deserialization exception handlers as described above, the binder does not provide such first class mechanisms for handling production exceptions. However, you still can configure production exception handlers using the StreamsBuilderFactoryBean customizer which you can find more details about, in a subsequent section below.

2.7. Retrying critical business logic

There are scenarios in which you might want to retry parts of your business logic that are critical to the application. There maybe an external call to a relational database or invoking a REST endpoint from the Kafka Streams processor. These calls can fail for various reasons such as network issues or remote service unavailability. More often, these failures may self resolve if you can try them again. By default, Kafka Streams binder creates RetryTemplate beans for all the input bindings.

If the function has the following signature,

@Bean
public java.util.function.Consumer<KStream<Object, String>> process()

and with default binding name, the RetryTemplate will be registered as process-in-0-RetryTemplate. This is following the convention of binding name (process-in-0) followed by the literal -RetryTemplate. In the case of multiple input bindings, there will be a separate RetryTemplate bean available per binding. If there is a custom RetryTemplate bean available in the application and provided through spring.cloud.stream.bindings.<binding-name>.consumer.retryTemplateName, then that takes precedence over any input binding level retry template configuration properties.

Once the RetryTemplate from the binding is injected into the application, it can be used to retry any critical sections of the application. Here is an example:

@Bean
public java.util.function.Consumer<KStream<Object, String>> process(@Lazy @Qualifier("process-in-0-RetryTemplate") RetryTemplate retryTemplate) {

    return input -> input
            .process(() -> new Processor<Object, String>() {
                @Override
                public void init(ProcessorContext processorContext) {
                }

                @Override
                public void process(Object o, String s) {
                    retryTemplate.execute(context -> {
                       //Critical business logic goes here.
                    });
                }

                @Override
                public void close() {
                }
            });
}

Or you can use a custom RetryTemplate as below.

@EnableAutoConfiguration
public static class CustomRetryTemplateApp {

    @Bean
    @StreamRetryTemplate
    RetryTemplate fooRetryTemplate() {
        RetryTemplate retryTemplate = new RetryTemplate();

        RetryPolicy retryPolicy = new SimpleRetryPolicy(4);
        FixedBackOffPolicy backOffPolicy = new FixedBackOffPolicy();
        backOffPolicy.setBackOffPeriod(1);

        retryTemplate.setBackOffPolicy(backOffPolicy);
        retryTemplate.setRetryPolicy(retryPolicy);

        return retryTemplate;
    }

    @Bean
    public java.util.function.Consumer<KStream<Object, String>> process() {

        return input -> input
                .process(() -> new Processor<Object, String>() {
                    @Override
                    public void init(ProcessorContext processorContext) {
                    }

                    @Override
                    public void process(Object o, String s) {
                        fooRetryTemplate().execute(context -> {
                           //Critical business logic goes here.
                        });

                    }

                    @Override
                    public void close() {
                    }
                });
    }
}

Note that when retries are exhausted, by default, the last exception will be thrown, causing the processor to terminate. If you wish to handle the exception and continue processing, you can add a RecoveryCallback to the execute method: Here is an example.

retryTemplate.execute(context -> {
    //Critical business logic goes here.
    }, context -> {
       //Recovery logic goes here.
       return null;
    ));

Refer to the Spring Retry project for more information about the RetryTemplate, retry policies, backoff policies and more.

2.8. State Store

State stores are created automatically by Kafka Streams when the high level DSL is used and appropriate calls are made those trigger a state store.

If you want to materialize an incoming KTable binding as a named state store, then you can do so by using the following strategy.

Lets say you have the following function.

@Bean
public BiFunction<KStream<String, Long>, KTable<String, String>, KStream<String, Long>> process() {
   ...
}

Then by setting the following property, the incoming KTable data will be materialized in to the named state store.

spring.cloud.stream.kafka.streams.bindings.process-in-1.consumer.materializedAs: incoming-store

You can define custom state stores as beans in your application and those will be detected and added to the Kafka Streams builder by the binder. Especially when the processor API is used, you need to register a state store manually. In order to do so, you can create the StateStore as a bean in the application. Here are examples of defining such beans.

@Bean
public StoreBuilder myStore() {
    return Stores.keyValueStoreBuilder(
            Stores.persistentKeyValueStore("my-store"), Serdes.Long(),
            Serdes.Long());
}

@Bean
public StoreBuilder otherStore() {
    return Stores.windowStoreBuilder(
            Stores.persistentWindowStore("other-store",
                    1L, 3, 3L, false), Serdes.Long(),
            Serdes.Long());
}

These state stores can be then accessed by the applications directly.

During the bootstrap, the above beans will be processed by the binder and passed on to the Streams builder object.

Accessing the state store:

Processor<Object, Product>() {

    WindowStore<Object, String> state;

    @Override
    public void init(ProcessorContext processorContext) {
        state = (WindowStore)processorContext.getStateStore("mystate");
    }
    ...
}

This will not work when it comes to registering global state stores. In order to register a global state store, please see the section below on customizing StreamsBuilderFactoryBean.

2.9. Interactive Queries

Kafka Streams binder API exposes a class called InteractiveQueryService to interactively query the state stores. You can access this as a Spring bean in your application. An easy way to get access to this bean from your application is to autowire the bean.

@Autowired
private InteractiveQueryService interactiveQueryService;

Once you gain access to this bean, then you can query for the particular state-store that you are interested. See below.

ReadOnlyKeyValueStore<Object, Object> keyValueStore =
						interactiveQueryService.getQueryableStoreType("my-store", QueryableStoreTypes.keyValueStore());

During the startup, the above method call to retrieve the store might fail. For e.g it might still be in the middle of initializing the state store. In such cases, it will be useful to retry this operation. Kafka Streams binder provides a simple retry mechanism to accommodate this.

Following are the two properties that you can use to control this retrying.

  • spring.cloud.stream.kafka.streams.binder.stateStoreRetry.maxAttempts - Default is 1 .

  • spring.cloud.stream.kafka.streams.binder.stateStoreRetry.backOffInterval - Default is 1000 milliseconds.

If there are multiple instances of the kafka streams application running, then before you can query them interactively, you need to identify which application instance hosts the particular key that you are querying. InteractiveQueryService API provides methods for identifying the host information.

In order for this to work, you must configure the property application.server as below:

spring.cloud.stream.kafka.streams.binder.configuration.application.server: <server>:<port>

Here are some code snippets:

org.apache.kafka.streams.state.HostInfo hostInfo = interactiveQueryService.getHostInfo("store-name",
						key, keySerializer);

if (interactiveQueryService.getCurrentHostInfo().equals(hostInfo)) {

    //query from the store that is locally available
}
else {
    //query from the remote host
}

2.9.1. Other API methods available through the InteractiveQueryService

Use the following API method to retrieve the KeyQueryMetadata object associated with the combination of given store and key.

public <K> KeyQueryMetadata getKeyQueryMetadata(String store, K key, Serializer<K> serializer)

Use the following API method to retrieve the KakfaStreams object associated with the combination of given store and key.

public <K> KafkaStreams getKafkaStreams(String store, K key, Serializer<K> serializer)

2.10. Health Indicator

The health indicator requires the dependency spring-boot-starter-actuator. For maven use:

<dependency>
  <groupId>org.springframework.boot</groupId>
  <artifactId>spring-boot-starter-actuator</artifactId>
</dependency>

Spring Cloud Stream Kafka Streams Binder provides a health indicator to check the state of the underlying streams threads. Spring Cloud Stream defines a property management.health.binders.enabled to enable the health indicator. See the Spring Cloud Stream documentation.

The health indicator provides the following details for each stream thread’s metadata:

  • Thread name

  • Thread state: CREATED, RUNNING, PARTITIONS_REVOKED, PARTITIONS_ASSIGNED, PENDING_SHUTDOWN or DEAD

  • Active tasks: task ID and partitions

  • Standby tasks: task ID and partitions

By default, only the global status is visible (UP or DOWN). To show the details, the property management.endpoint.health.show-details must be set to ALWAYS or WHEN_AUTHORIZED. For more details about the health information, see the Spring Boot Actuator documentation.

The status of the health indicator is UP if all the Kafka threads registered are in the RUNNING state.

Since there are three individual binders in Kafka Streams binder (KStream, KTable and GlobalKTable), all of them will report the health status. When enabling show-details, some of the information reported may be redundant.

When there are multiple Kafka Streams processors present in the same application, then the health checks will be reported for all of them and will be categorized by the application ID of Kafka Streams.

2.11. Accessing Kafka Streams Metrics

Spring Cloud Stream Kafka Streams binder provides Kafka Streams metrics which can be exported through a Micrometer MeterRegistry.

For Spring Boot version 2.2.x, the metrics support is provided through a custom Micrometer metrics implementation by the binder. For Spring Boot version 2.3.x, the Kafka Streams metrics support is provided natively through Micrometer.

When accessing metrics through the Boot actuator endpoint, make sure to add metrics to the property management.endpoints.web.exposure.include. Then you can access /acutator/metrics to get a list of all the available metrics, which then can be individually accessed through the same URI (/actuator/metrics/<metric-name>).

2.12. Mixing high level DSL and low level Processor API

Kafka Streams provides two variants of APIs. It has a higher level DSL like API where you can chain various operations that maybe familiar to a lot of functional programmers. Kafka Streams also gives access to a low level Processor API. The processor API, although very powerful and gives the ability to control things in a much lower level, is imperative in nature. Kafka Streams binder for Spring Cloud Stream, allows you to use either the high level DSL or mixing both the DSL and the processor API. Mixing both of these variants give you a lot of options to control various use cases in an application. Applications can use the transform or process method API calls to get access to the processor API.

Here is a look at how one may combine both the DSL and the processor API in a Spring Cloud Stream application using the process API.

@Bean
public Consumer<KStream<Object, String>> process() {
    return input ->
        input.process(() -> new Processor<Object, String>() {
            @Override
            @SuppressWarnings("unchecked")
            public void init(ProcessorContext context) {
               this.context = context;
            }

            @Override
            public void process(Object key, String value) {
                //business logic
            }

            @Override
            public void close() {

        });
}

Here is an example using the transform API.

@Bean
public Consumer<KStream<Object, String>> process() {
    return (input, a) ->
        input.transform(() -> new Transformer<Object, String, KeyValue<Object, String>>() {
            @Override
            public void init(ProcessorContext context) {

            }

            @Override
            public void close() {

            }

            @Override
            public KeyValue<Object, String> transform(Object key, String value) {
                // business logic - return transformed KStream;
            }
        });
}

The process API method call is a terminal operation while the transform API is non terminal and gives you a potentially transformed KStream using which you can continue further processing using either the DSL or the processor API.

2.13. Partition support on the outbound

A Kafka Streams processor usually sends the processed output into an outbound Kafka topic. If the outbound topic is partitioned and the processor needs to send the outgoing data into particular partitions, the applications needs to provide a bean of type StreamPartitioner. See StreamPartitioner for more details. Let’s see some examples.

This is the same processor we already saw multiple times,

@Bean
public Function<KStream<Object, String>, KStream<?, WordCount>> process() {

    ...
}

Here is the output binding destination:

spring.cloud.stream.bindings.process-out-0.destination: outputTopic

If the topic outputTopic has 4 partitions, if you don’t provide a partitioning strategy, Kafka Streams will use default partitioning strategy which may not be the outcome you want depending on the particular use case. Let’s say, you want to send any key that matches to spring to partition 0, cloud to partition 1, stream to partition 2, and everything else to partition 3. This is what you need to do in the application.

@Bean
public StreamPartitioner<String, WordCount> streamPartitioner() {
    return (t, k, v, n) -> {
        if (k.equals("spring")) {
            return 0;
        }
        else if (k.equals("cloud")) {
            return 1;
        }
        else if (k.equals("stream")) {
            return 2;
        }
        else {
            return 3;
        }
    };
}

This is a rudimentary implementation, however, you have access to the key/value of the record, the topic name and the total number of partitions. Therefore, you can implement complex partitioning strategies if need be.

You also need to provide this bean name along with the application configuration.

spring.cloud.stream.kafka.streams.bindings.process-out-0.producer.streamPartitionerBeanName: streamPartitioner

Each output topic in the application needs to be configured separately like this.

2.14. StreamsBuilderFactoryBean customizer

It is often required to customize the StreamsBuilderFactoryBean that creates the KafkaStreams objects. Based on the underlying support provided by Spring Kafka, the binder allows you to customize the StreamsBuilderFactoryBean. You can use the StreamsBuilderFactoryBeanCustomizer to customize the StreamsBuilderFactoryBean itself. Then, once you get access to the StreamsBuilderFactoryBean through this customizer, you can customize the corresponding KafkaStreams using KafkaStreamsCustomzier. Both of these customizers are part of the Spring for Apache Kafka project.

Here is an example of using the StreamsBuilderFactoryBeanCustomizer.

@Bean
public StreamsBuilderFactoryBeanCustomizer streamsBuilderFactoryBeanCustomizer() {
    return sfb -> sfb.setStateListener((newState, oldState) -> {
         //Do some action here!
    });
}

The above is shown as an illustration of the things you can do to customize the StreamsBuilderFactoryBean. You can essentially call any available mutation operations from StreamsBuilderFactoryBean to customize it. This customizer will be invoked by the binder right before the factory bean is started.

Once you get access to the StreamsBuilderFactoryBean, you can also customize the underlying KafkaStreams object. Here is a blueprint for doing so.

@Bean
public StreamsBuilderFactoryBeanCustomizer streamsBuilderFactoryBeanCustomizer() {
    return factoryBean -> {
        factoryBean.setKafkaStreamsCustomizer(new KafkaStreamsCustomizer() {
            @Override
            public void customize(KafkaStreams kafkaStreams) {
                kafkaStreams.setUncaughtExceptionHandler((t, e) -> {

                });
            }
        });
    };
}

KafkaStreamsCustomizer will be called by the StreamsBuilderFactoryBeabn right before the underlying KafkaStreams gets started.

There can only be one StreamsBuilderFactoryBeanCustomizer in the entire application. Then how do we account for multiple Kafka Streams processors as each of them are backed up by individual StreamsBuilderFactoryBean objects? In that case, if the customization needs to be different for those processors, then the application needs to apply some filter based on the application ID.

For e.g,

@Bean
public StreamsBuilderFactoryBeanCustomizer streamsBuilderFactoryBeanCustomizer() {

    return factoryBean -> {
        if (factoryBean.getStreamsConfiguration().getProperty(StreamsConfig.APPLICATION_ID_CONFIG)
                .equals("processor1-application-id")) {
            factoryBean.setKafkaStreamsCustomizer(new KafkaStreamsCustomizer() {
                @Override
                public void customize(KafkaStreams kafkaStreams) {
                    kafkaStreams.setUncaughtExceptionHandler((t, e) -> {

                    });
                }
            });
        }
    };

2.14.1. Using Customizer to register a global state store

As mentioned above, the binder does not provide a first class way to register global state stores as a feature. For that, you need to use the customizer. Here is how that can be done.

@Bean
public StreamsBuilderFactoryBeanCustomizer customizer() {
    return fb -> {
        try {
            final StreamsBuilder streamsBuilder = fb.getObject();
            streamsBuilder.addGlobalStore(...);
        }
        catch (Exception e) {

        }
    };
}

Again, if you have multiple processors, you want to attach the global state store to the right StreamsBuilder by filtering out the other StreamsBuilderFactoryBean objects using the application id as outlined above.

2.14.2. Using customizer to register a production exception handler

In the error handling section, we indicated that the binder does not provide a first class way to deal with production exceptions. Though that is the case, you can still use the StreamsBuilderFacotryBean customizer to register production exception handlers. See below.

@Bean
public StreamsBuilderFactoryBeanCustomizer customizer() {
    return fb -> {
        fb.getStreamsConfiguration().put(StreamsConfig.DEFAULT_PRODUCTION_EXCEPTION_HANDLER_CLASS_CONFIG,
                            CustomProductionExceptionHandler.class);
    };
}

Once again, if you have multiple processors, you may want to set it appropriately against the correct StreamsBuilderFactoryBean. You may also add such production exception handlers using the configuration property (See below for more on that), but this is an option if you choose to go with a programmatic approach.

2.15. Timestamp extractor

Kafka Streams allows you to control the processing of the consumer records based on various notions of timestamp. By default, Kafka Streams extracts the timestamp metadata embedded in the consumer record. You can change this default behavior by providing a different TimestampExtractor implementation per input binding. Here are some details on how that can be done.

@Bean
public Function<KStream<Long, Order>,
        Function<KTable<Long, Customer>,
                Function<GlobalKTable<Long, Product>, KStream<Long, Order>>>> process() {
    return orderStream ->
            customers ->
                products -> orderStream;
}

@Bean
public TimestampExtractor timestampExtractor() {
    return new WallclockTimestampExtractor();
}

Then you set the above TimestampExtractor bean name per consumer binding.

spring.cloud.stream.kafka.streams.bindings.process-in-0.consumer.timestampExtractorBeanName=timestampExtractor
spring.cloud.stream.kafka.streams.bindings.process-in-1.consumer.timestampExtractorBeanName=timestampExtractor
spring.cloud.stream.kafka.streams.bindings.process-in-2.consumer.timestampExtractorBeanName=timestampExtractor"

If you skip an input consumer binding for setting a custom timestamp extractor, that consumer will use the default settings.

2.16. Multi binders with Kafka Streams based binders and regular Kafka Binder

You can have an application where you have both a function/consumer/supplier that is based on the regular Kafka binder and a Kafka Streams based processor. However, you cannot mix both of them within a single function or consumer.

Here is an example, where you have both binder based components within the same application.

@Bean
public Function<String, String> process() {
    return s -> s;
}

@Bean
public Function<KStream<Object, String>, KStream<?, WordCount>> kstreamProcess() {

    return input -> input;
}

This is the relevant parts from the configuration:

spring.cloud.stream.function.definition=process;kstreamProcess
spring.cloud.stream.bindings.process-in-0.destination=foo
spring.cloud.stream.bindings.process-out-0.destination=bar
spring.cloud.stream.bindings.kstreamProcess-in-0.destination=bar
spring.cloud.stream.bindings.kstreamProcess-out-0.destination=foobar

Things become a bit more complex if you have the same application as above, but is dealing with two different Kafka clusters, for e.g. the regular process is acting upon both Kafka cluster 1 and cluster 2 (receiving data from cluster-1 and sending to cluster-2) and the Kafka Streams processor is acting upon Kafka cluster 2. Then you have to use the multi binder facilities provided by Spring Cloud Stream.

Here is how your configuration may change in that scenario.

# multi binder configuration
spring.cloud.stream.binders.kafka1.type: kafka
spring.cloud.stream.binders.kafka1.environment.spring.cloud.stream.kafka.streams.binder.brokers=${kafkaCluster-1} #Replace kafkaCluster-1 with the approprate IP of the cluster
spring.cloud.stream.binders.kafka2.type: kafka
spring.cloud.stream.binders.kafka2.environment.spring.cloud.stream.kafka.streams.binder.brokers=${kafkaCluster-2} #Replace kafkaCluster-2 with the approprate IP of the cluster
spring.cloud.stream.binders.kafka3.type: kstream
spring.cloud.stream.binders.kafka3.environment.spring.cloud.stream.kafka.streams.binder.brokers=${kafkaCluster-2} #Replace kafkaCluster-2 with the approprate IP of the cluster

spring.cloud.stream.function.definition=process;kstreamProcess

# From cluster 1 to cluster 2 with regular process function
spring.cloud.stream.bindings.process-in-0.destination=foo
spring.cloud.stream.bindings.process-in-0.binder=kafka1 # source from cluster 1
spring.cloud.stream.bindings.process-out-0.destination=bar
spring.cloud.stream.bindings.process-out-0.binder=kafka2 # send to cluster 2

# Kafka Streams processor on cluster 2
spring.cloud.stream.bindings.kstreamProcess-in-0.destination=bar
spring.cloud.stream.bindings.kstreamProcess-in-0.binder=kafka3
spring.cloud.stream.bindings.kstreamProcess-out-0.destination=foobar
spring.cloud.stream.bindings.kstreamProcess-out-0.binder=kafka3

Pay attention to the above configuration. We have two kinds of binders, but 3 binders all in all, first one is the regular Kafka binder based on cluster 1 (kafka1), then another Kafka binder based on cluster 2 (kafka2) and finally the kstream one (kafka3). The first processor in the application receives data from kafka1 and publishes to kafka2 where both binders are based on regular Kafka binder but differnt clusters. The second processor, which is a Kafka Streams processor consumes data from kafka3 which is the same cluster as kafka2, but a different binder type.

Since there are three different binder types available in the Kafka Streams family of binders - kstream, ktable and globalktable - if your application has multiple bindings based on any of these binders, that needs to be explicitly provided as the binder type.

For e.g if you have a processor as below,

@Bean
public Function<KStream<Long, Order>,
        Function<KTable<Long, Customer>,
                Function<GlobalKTable<Long, Product>, KStream<Long, EnrichedOrder>>>> enrichOrder() {

    ...
}

then, this has to be configured in a multi binder scenario as the following. Please note that this is only needed if you have a true multi-binder scenario where there are multiple processors dealing with multiple clusters within a single application. In that case, the binders need to be explicitly provided with the bindings to distinguish from other processor’s binder types and clusters.

spring.cloud.stream.binders.kafka1.type: kstream
spring.cloud.stream.binders.kafka1.environment.spring.cloud.stream.kafka.streams.binder.brokers=${kafkaCluster-2}
spring.cloud.stream.binders.kafka2.type: ktable
spring.cloud.stream.binders.kafka2.environment.spring.cloud.stream.kafka.streams.binder.brokers=${kafkaCluster-2}
spring.cloud.stream.binders.kafka3.type: globalktable
spring.cloud.stream.binders.kafka3.environment.spring.cloud.stream.kafka.streams.binder.brokers=${kafkaCluster-2}

spring.cloud.stream.bindings.enrichOrder-in-0.binder=kafka1  #kstream
spring.cloud.stream.bindings.enrichOrder-in-1.binder=kafka2  #ktablr
spring.cloud.stream.bindings.enrichOrder-in-2.binder=kafka3  #globalktable
spring.cloud.stream.bindings.enrichOrder-out-0.binder=kafka1 #kstream

# rest of the configuration is omitted.

2.17. State Cleanup

By default, the Kafkastreams.cleanup() method is called when the binding is stopped. See the Spring Kafka documentation. To modify this behavior simply add a single CleanupConfig @Bean (configured to clean up on start, stop, or neither) to the application context; the bean will be detected and wired into the factory bean.

2.18. Kafka Streams topology visualization

Kafka Streams binder provides the following actuator endpoints for retrieving the topology description using which you can visualize the topology using external tools.

/actuator/kafkastreamstopology

/actuator/kafkastreamstopology/<application-id of the processor>

You need to include the actuator and web dependencies from Spring Boot to access these endpoints. Further, you also need to add kafkastreamstopology to management.endpoints.web.exposure.include property. By default, the kafkastreamstopology endpoint is disabled.

2.19. Event type based routing in Kafka Streams applications

Routing functions available in regular message channel based binders are not supported in Kafka Streams binder. However, Kafka Streams binder still provides routing capabilities through the event type record header on the inbound records.

To enable routing based on event types, the application must provide the following property.

spring.cloud.stream.kafka.streams.bindings.<binding-name>.consumer.eventTypes.

This can be a comma separated value.

For example, lets assume we have this function:

@Bean
public Function<KStream<Integer, Foo>, KStream<Integer, Foo>> process() {
    return input -> input;
}

Let us also assume that we only want the business logic in this function to be executed, if the incoming record has event types as foo or bar. That can be expressed as below using the eventTypes property on the binding.

spring.cloud.stream.kafka.streams.bindings.process-in-0.consumer.eventTypes=foo,bar

Now, when the application runs, the binder checks each incoming records for the header event_type and see if it has value set as foo or bar. If it does not find either of them, then the function execution will be skipped.

By default, the binder expects the record header key to be event_type, but that can be changed per binding. For instance, if we want to change the header key on this binding to my_event instead of the default, that can be changed as below.

spring.cloud.stream.kafka.streams.bindings.process-in-0.consumer.eventTypeHeaderKey=my_event.

2.20. Configuration Options

This section contains the configuration options used by the Kafka Streams binder.

For common configuration options and properties pertaining to binder, refer to the core documentation.

2.20.1. Kafka Streams Binder Properties

The following properties are available at the binder level and must be prefixed with spring.cloud.stream.kafka.streams.binder.

configuration

Map with a key/value pair containing properties pertaining to Apache Kafka Streams API. This property must be prefixed with spring.cloud.stream.kafka.streams.binder.. Following are some examples of using this property.

spring.cloud.stream.kafka.streams.binder.configuration.default.key.serde=org.apache.kafka.common.serialization.Serdes$StringSerde
spring.cloud.stream.kafka.streams.binder.configuration.default.value.serde=org.apache.kafka.common.serialization.Serdes$StringSerde
spring.cloud.stream.kafka.streams.binder.configuration.commit.interval.ms=1000

For more information about all the properties that may go into streams configuration, see StreamsConfig JavaDocs in Apache Kafka Streams docs. All configuration that you can set from StreamsConfig can be set through this. When using this property, it is applicable against the entire application since this is a binder level property. If you have more than processors in the application, all of them will acquire these properties. In the case of properties like application.id, this will become problematic and therefore you have to carefully examine how the properties from StreamsConfig are mapped using this binder level configuration property.

functions.<function-bean-name>.applicationId

Applicable only for functional style processors. This can be used for setting application ID per function in the application. In the case of multiple functions, this is a handy way to set the application ID.

functions.<function-bean-name>.configuration

Applicable only for functional style processors. Map with a key/value pair containing properties pertaining to Apache Kafka Streams API. This is similar to the binder level configuration property describe above, but this level of configuration property is restricted only against the named function. When you have multiple processors and you want to restrict access to the configuration based on particular functions, you might want to use this. All StreamsConfig properties can be used here.

brokers

Broker URL

Default: localhost

zkNodes

Zookeeper URL

Default: localhost

deserializationExceptionHandler

Deserialization error handler type. This handler is applied at the binder level and thus applied against all input binding in the application. There is a way to control it in a more fine-grained way at the consumer binding level. Possible values are - logAndContinue, logAndFail or sendToDlq

Default: logAndFail

applicationId

Convenient way to set the application.id for the Kafka Streams application globally at the binder level. If the application contains multiple functions or StreamListener methods, then the application id should be set differently. See above where setting the application id is discussed in detail.

Default: application will generate a static application ID. See the application ID section for more details.

stateStoreRetry.maxAttempts

Max attempts for trying to connect to a state store.

Default: 1

stateStoreRetry.backoffPeriod

Backoff period when trying to connect to a state store on a retry.

Default: 1000 ms

consumerProperties

Arbitrary consumer properties at the binder level.

producerProperties

Arbitrary producer properties at the binder level.

2.20.2. Kafka Streams Producer Properties

The following properties are only available for Kafka Streams producers and must be prefixed with spring.cloud.stream.kafka.streams.bindings.<binding name>.producer. For convenience, if there are multiple output bindings and they all require a common value, that can be configured by using the prefix spring.cloud.stream.kafka.streams.default.producer..

keySerde

key serde to use

Default: See the above discussion on message de/serialization

valueSerde

value serde to use

Default: See the above discussion on message de/serialization

useNativeEncoding

flag to enable/disable native encoding

Default: true.

streamPartitionerBeanName: Custom outbound partitioner bean name to be used at the consumer. Applications can provide custom StreamPartitioner as a Spring bean and the name of this bean can be provided to the producer to use instead of the default one.

+ Default: See the discussion above on outbound partition support.

2.20.3. Kafka Streams Consumer Properties

The following properties are available for Kafka Streams consumers and must be prefixed with spring.cloud.stream.kafka.streams.bindings.<binding-name>.consumer. For convenience, if there are multiple input bindings and they all require a common value, that can be configured by using the prefix spring.cloud.stream.kafka.streams.default.consumer..

applicationId

Setting application.id per input binding. This is only preferred for StreamListener based processors, for function based processors see other approaches outlined above.

Default: See above.

keySerde

key serde to use

Default: See the above discussion on message de/serialization

valueSerde

value serde to use

Default: See the above discussion on message de/serialization

materializedAs

state store to materialize when using incoming KTable types

Default: none.

useNativeDecoding

flag to enable/disable native decoding

Default: true.

dlqName

DLQ topic name.

Default: See above on the discussion of error handling and DLQ.

startOffset

Offset to start from if there is no committed offset to consume from. This is mostly used when the consumer is consuming from a topic for the first time. Kafka Streams uses earliest as the default strategy and the binder uses the same default. This can be overridden to latest using this property.

Default: earliest.

Note: Using resetOffsets on the consumer does not have any effect on Kafka Streams binder. Unlike the message channel based binder, Kafka Streams binder does not seek to beginning or end on demand.

deserializationExceptionHandler

Deserialization error handler type. This handler is applied per consumer binding as opposed to the binder level property described before. Possible values are - logAndContinue, logAndFail or sendToDlq

Default: logAndFail

timestampExtractorBeanName

Specific time stamp extractor bean name to be used at the consumer. Applications can provide TimestampExtractor as a Spring bean and the name of this bean can be provided to the consumer to use instead of the default one.

Default: See the discussion above on timestamp extractors.

eventTypes

Comma separated list of supported event types for this binding.

Default: none

eventTypeHeaderKey

Event type header key on each incoming records through this binding.

Default: event_type

2.20.4. Special note on concurrency

In Kafka Streams, you can control of the number of threads a processor can create using the num.stream.threads property. This, you can do using the various configuration options described above under binder, functions, producer or consumer level. You can also use the concurrency property that core Spring Cloud Stream provides for this purpose. When using this, you need to use it on the consumer. When you have more than one input bindings either in a function or StreamListener, set this on the first input binding. For e.g. when setting spring.cloud.stream.bindings.process-in-0.consumer.concurrency, it will be translated as num.stream.threads by the binder. If you have multiple processors and one processor defines binding level concurrency, but not the others, those ones with no binding level concurrency will default back to the binder wide property specified through spring.cloud.stream.kafka.streams.binder.configuration.num.stream.threads. If this binder configuration is not available, then the application will use the default set by Kafka Streams.

Appendices

Appendix A: Building

A.1. Basic Compile and Test

To build the source you will need to install JDK 1.7.

The build uses the Maven wrapper so you don’t have to install a specific version of Maven. To enable the tests, you should have Kafka server 0.9 or above running before building. See below for more information on running the servers.

The main build command is

$ ./mvnw clean install

You can also add '-DskipTests' if you like, to avoid running the tests.

You can also install Maven (>=3.3.3) yourself and run the mvn command in place of ./mvnw in the examples below. If you do that you also might need to add -P spring if your local Maven settings do not contain repository declarations for spring pre-release artifacts.
Be aware that you might need to increase the amount of memory available to Maven by setting a MAVEN_OPTS environment variable with a value like -Xmx512m -XX:MaxPermSize=128m. We try to cover this in the .mvn configuration, so if you find you have to do it to make a build succeed, please raise a ticket to get the settings added to source control.

The projects that require middleware generally include a docker-compose.yml, so consider using Docker Compose to run the middeware servers in Docker containers.

A.2. Documentation

There is a "full" profile that will generate documentation.

A.3. Working with the code

If you don’t have an IDE preference we would recommend that you use Spring Tools Suite or Eclipse when working with the code. We use the m2eclipe eclipse plugin for maven support. Other IDEs and tools should also work without issue.

A.3.1. Importing into eclipse with m2eclipse

We recommend the m2eclipe eclipse plugin when working with eclipse. If you don’t already have m2eclipse installed it is available from the "eclipse marketplace".

Unfortunately m2e does not yet support Maven 3.3, so once the projects are imported into Eclipse you will also need to tell m2eclipse to use the .settings.xml file for the projects. If you do not do this you may see many different errors related to the POMs in the projects. Open your Eclipse preferences, expand the Maven preferences, and select User Settings. In the User Settings field click Browse and navigate to the Spring Cloud project you imported selecting the .settings.xml file in that project. Click Apply and then OK to save the preference changes.

Alternatively you can copy the repository settings from .settings.xml into your own ~/.m2/settings.xml.

A.3.2. Importing into eclipse without m2eclipse

If you prefer not to use m2eclipse you can generate eclipse project metadata using the following command:

$ ./mvnw eclipse:eclipse

The generated eclipse projects can be imported by selecting import existing projects from the file menu.

[[contributing] == Contributing

Spring Cloud is released under the non-restrictive Apache 2.0 license, and follows a very standard Github development process, using Github tracker for issues and merging pull requests into master. If you want to contribute even something trivial please do not hesitate, but follow the guidelines below.

A.4. Sign the Contributor License Agreement

Before we accept a non-trivial patch or pull request we will need you to sign the contributor’s agreement. Signing the contributor’s agreement does not grant anyone commit rights to the main repository, but it does mean that we can accept your contributions, and you will get an author credit if we do. Active contributors might be asked to join the core team, and given the ability to merge pull requests.

A.5. Code Conventions and Housekeeping

None of these is essential for a pull request, but they will all help. They can also be added after the original pull request but before a merge.

  • Use the Spring Framework code format conventions. If you use Eclipse you can import formatter settings using the eclipse-code-formatter.xml file from the Spring Cloud Build project. If using IntelliJ, you can use the Eclipse Code Formatter Plugin to import the same file.

  • Make sure all new .java files to have a simple Javadoc class comment with at least an @author tag identifying you, and preferably at least a paragraph on what the class is for.

  • Add the ASF license header comment to all new .java files (copy from existing files in the project)

  • Add yourself as an @author to the .java files that you modify substantially (more than cosmetic changes).

  • Add some Javadocs and, if you change the namespace, some XSD doc elements.

  • A few unit tests would help a lot as well — someone has to do it.

  • If no-one else is using your branch, please rebase it against the current master (or other target branch in the main project).

  • When writing a commit message please follow these conventions, if you are fixing an existing issue please add Fixes gh-XXXX at the end of the commit message (where XXXX is the issue number).