aws.paramstore.default-context

application

aws.paramstore.enabled

true

Is AWS Parameter Store support enabled.

aws.paramstore.fail-fast

true

Throw exceptions during config lookup if true, otherwise, log warnings.

aws.paramstore.name

Alternative to spring.application.name to use in looking up values in AWS Parameter Store.

aws.paramstore.prefix

/config

Prefix indicating first level for every property. Value must start with a forward slash followed by a valid path segment or be empty. Defaults to "/config".

aws.paramstore.profile-separator

_

aws.paramstore.region

If region value is not null or empty it will be used in creation of AWSSimpleSystemsManagement.

aws.secretsmanager.default-context

application

aws.secretsmanager.enabled

true

Is AWS Secrets Manager support enabled.

aws.secretsmanager.fail-fast

true

Throw exceptions during config lookup if true, otherwise, log warnings.

aws.secretsmanager.name

Alternative to spring.application.name to use in looking up values in AWS Secrets Manager.

aws.secretsmanager.prefix

/secret

Prefix indicating first level for every property. Value must start with a forward slash followed by a valid path segment or be empty. Defaults to "/config".

aws.secretsmanager.profile-separator

_

aws.secretsmanager.region

If region value is not null or empty it will be used in creation of AWSSecretsManager.

cloud.aws.credentials.access-key

The access key to be used with a static provider.

cloud.aws.credentials.instance-profile

true

Configures an instance profile credentials provider with no further configuration.

cloud.aws.credentials.profile-name

The AWS profile name.

cloud.aws.credentials.profile-path

The AWS profile path.

cloud.aws.credentials.secret-key

The secret key to be used with a static provider.

cloud.aws.credentials.use-default-aws-credentials-chain

false

Use the DefaultAWSCredentials Chain instead of configuring a custom credentials chain.

cloud.aws.loader.core-pool-size

1

The core pool size of the Task Executor used for parallel S3 interaction. @see org.springframework.scheduling.concurrent.ThreadPoolTaskExecutor#setCorePoolSize(int)

cloud.aws.loader.max-pool-size

The maximum pool size of the Task Executor used for parallel S3 interaction. @see org.springframework.scheduling.concurrent.ThreadPoolTaskExecutor#setMaxPoolSize(int)

cloud.aws.loader.queue-capacity

The maximum queue capacity for backed up S3 requests. @see org.springframework.scheduling.concurrent.ThreadPoolTaskExecutor#setQueueCapacity(int)

cloud.aws.region.auto

true

Enables automatic region detection based on the EC2 meta data service.

cloud.aws.region.static

cloud.aws.region.use-default-aws-region-chain

false

Whether default AWS SDK region provider chain should be used when auto is set to true.

cloud.aws.stack.auto

true

Enables the automatic stack name detection for the application.

cloud.aws.stack.name

The name of the manually configured stack name that will be used to retrieve the resources.

eureka.client.eureka-connection-idle-timeout-seconds

30

Indicates how much time (in seconds) that the HTTP connections to eureka server can stay idle before it can be closed. In the AWS environment, it is recommended that the values is 30 seconds or less, since the firewall cleans up the connection information after a few mins leaving the connection hanging in limbo.

eureka.client.eureka-server-connect-timeout-seconds

5

Indicates how long to wait (in seconds) before a connection to eureka server needs to timeout. Note that the connections in the client are pooled by org.apache.http.client.HttpClient and this setting affects the actual connection creation and also the wait time to get the connection from the pool.

eureka.client.eureka-server-d-n-s-name

Gets the DNS name to be queried to get the list of eureka servers.This information is not required if the contract returns the service urls by implementing serviceUrls. The DNS mechanism is used when useDnsForFetchingServiceUrls is set to true and the eureka client expects the DNS to configured a certain way so that it can fetch changing eureka servers dynamically. The changes are effective at runtime.

eureka.client.eureka-server-port

Gets the port to be used to construct the service url to contact eureka server when the list of eureka servers come from the DNS.This information is not required if the contract returns the service urls eurekaServerServiceUrls(String). The DNS mechanism is used when useDnsForFetchingServiceUrls is set to true and the eureka client expects the DNS to configured a certain way so that it can fetch changing eureka servers dynamically. The changes are effective at runtime.

eureka.client.eureka-server-read-timeout-seconds

8

Indicates how long to wait (in seconds) before a read from eureka server needs to timeout.

eureka.client.eureka-server-total-connections

200

Gets the total number of connections that is allowed from eureka client to all eureka servers.

eureka.client.eureka-server-total-connections-per-host

50

Gets the total number of connections that is allowed from eureka client to a eureka server host.

eureka.client.eureka-server-u-r-l-context

Gets the URL context to be used to construct the service url to contact eureka server when the list of eureka servers come from the DNS. This information is not required if the contract returns the service urls from eurekaServerServiceUrls. The DNS mechanism is used when useDnsForFetchingServiceUrls is set to true and the eureka client expects the DNS to configured a certain way so that it can fetch changing eureka servers dynamically. The changes are effective at runtime.

eureka.client.eureka-service-url-poll-interval-seconds

0

Indicates how often(in seconds) to poll for changes to eureka server information. Eureka servers could be added or removed and this setting controls how soon the eureka clients should know about it.

eureka.client.prefer-same-zone-eureka

true

Indicates whether or not this instance should try to use the eureka server in the same zone for latency and/or other reason. Ideally eureka clients are configured to talk to servers in the same zone The changes are effective at runtime at the next registry fetch cycle as specified by registryFetchIntervalSeconds

eureka.client.register-with-eureka

true

Indicates whether or not this instance should register its information with eureka server for discovery by others. In some cases, you do not want your instances to be discovered whereas you just want do discover other instances.

eureka.server.peer-eureka-nodes-update-interval-ms

0

eureka.server.peer-eureka-status-refresh-time-interval-ms

0

feign.client.config

feign.client.default-config

default

feign.client.default-to-properties

true

feign.compression.request.enabled

false

Enables the request sent by Feign to be compressed.

feign.compression.request.mime-types

[text/xml, application/xml, application/json]

The list of supported mime types.

feign.compression.request.min-request-size

2048

The minimum threshold content size.

feign.compression.response.enabled

false

Enables the response from Feign to be compressed.

feign.compression.response.useGzipDecoder

false

Enables the default gzip decoder to be used.

feign.httpclient.connection-timeout

2000

feign.httpclient.connection-timer-repeat

3000

feign.httpclient.disable-ssl-validation

false

feign.httpclient.enabled

true

Enables the use of the Apache HTTP Client by Feign.

feign.httpclient.follow-redirects

true

feign.httpclient.max-connections

200

feign.httpclient.max-connections-per-route

50

feign.httpclient.time-to-live

900

feign.httpclient.time-to-live-unit

feign.hystrix.enabled

false

If true, an OpenFeign client will be wrapped with a Hystrix circuit breaker.

feign.okhttp.enabled

false

Enables the use of the OK HTTP Client by Feign.

management.endpoint.hystrix.config

Hystrix settings. These are traditionally set using servlet parameters. Refer to the documentation of Hystrix for more details.

management.endpoint.hystrix.stream.enabled

true

Whether to enable the hystrix.stream endpoint.

management.metrics.binders.hystrix.enabled

true

Enables creation of OK Http Client factory beans.

ribbon.eureka.enabled

true

Enables the use of Eureka with Ribbon.

spring.cloud.bus.ack.destination-service

Service that wants to listen to acks. By default null (meaning all services).

spring.cloud.bus.ack.enabled

true

Flag to switch off acks (default on).

spring.cloud.bus.destination

springCloudBus

Name of Spring Cloud Stream destination for messages.

spring.cloud.bus.enabled

true

Flag to indicate that the bus is enabled.

spring.cloud.bus.env.enabled

true

Flag to switch off environment change events (default on).

spring.cloud.bus.id

application

The identifier for this application instance.

spring.cloud.bus.refresh.enabled

true

Flag to switch off refresh events (default on).

spring.cloud.bus.trace.enabled

false

Flag to switch on tracing of acks (default off).

spring.cloud.circuitbreaker.hystrix.enabled

true

Enables auto-configuration of the Hystrix Spring Cloud CircuitBreaker API implementation.

spring.cloud.cloudfoundry.discovery.default-server-port

80

Port to use when no port is defined by ribbon.

spring.cloud.cloudfoundry.discovery.enabled

true

Flag to indicate that discovery is enabled.

spring.cloud.cloudfoundry.discovery.heartbeat-frequency

5000

Frequency in milliseconds of poll for heart beat. The client will poll on this frequency and broadcast a list of service ids.

spring.cloud.cloudfoundry.discovery.internal-domain

apps.internal

Default internal domain when configured to use Native DNS service discovery.

spring.cloud.cloudfoundry.discovery.order

0

Order of the discovery client used by `CompositeDiscoveryClient` for sorting available clients.

spring.cloud.cloudfoundry.discovery.use-container-ip

false

Whether to resolve hostname when BOSH DNS is used. In order to use this feature, spring.cloud.cloudfoundry.discovery.use-dns must be true.

spring.cloud.cloudfoundry.discovery.use-dns

false

Whether to use BOSH DNS for the discovery. In order to use this feature, your Cloud Foundry installation must support Service Discovery.

spring.cloud.cloudfoundry.org

Organization name to initially target.

spring.cloud.cloudfoundry.password

Password for user to authenticate and obtain token.

spring.cloud.cloudfoundry.skip-ssl-validation

false

spring.cloud.cloudfoundry.space

Space name to initially target.

spring.cloud.cloudfoundry.url

URL of Cloud Foundry API (Cloud Controller).

spring.cloud.cloudfoundry.username

Username to authenticate (usually an email address).

spring.cloud.compatibility-verifier.compatible-boot-versions

Default accepted versions for the Spring Boot dependency. You can set {@code x} for the patch version if you don't want to specify a concrete value. Example: {@code 3.4.x}

spring.cloud.compatibility-verifier.enabled

false

Enables creation of Spring Cloud compatibility verification.

spring.cloud.config.allow-override

true

Flag to indicate that {@link #isOverrideSystemProperties() systemPropertiesOverride} can be used. Set to false to prevent users from changing the default accidentally. Default true.

spring.cloud.config.allow-override

true

Flag to indicate that {@link #isOverrideSystemProperties() systemPropertiesOverride} can be used. Set to false to prevent users from changing the default accidentally. Default true.

spring.cloud.config.discovery.enabled

false

Flag to indicate that config server discovery is enabled (config server URL will be looked up via discovery).

spring.cloud.config.discovery.service-id

configserver

Service id to locate config server.

spring.cloud.config.enabled

true

Flag to say that remote configuration is enabled. Default true;

spring.cloud.config.fail-fast

false

Flag to indicate that failure to connect to the server is fatal (default false).

spring.cloud.config.headers

Additional headers used to create the client request.

spring.cloud.config.label

The label name to use to pull remote configuration properties. The default is set on the server (generally "master" for a git based server).

spring.cloud.config.name

Name of application used to fetch remote properties.

spring.cloud.config.override-none

false

Flag to indicate that when {@link #setAllowOverride(boolean) allowOverride} is true, external properties should take lowest priority and should not override any existing property sources (including local config files). Default false.

spring.cloud.config.override-none

false

Flag to indicate that when {@link #setAllowOverride(boolean) allowOverride} is true, external properties should take lowest priority and should not override any existing property sources (including local config files). Default false.

spring.cloud.config.override-system-properties

true

Flag to indicate that the external properties should override system properties. Default true.

spring.cloud.config.override-system-properties

true

Flag to indicate that the external properties should override system properties. Default true.

spring.cloud.config.password

The password to use (HTTP Basic) when contacting the remote server.

spring.cloud.config.profile

default

The default profile to use when fetching remote configuration (comma-separated). Default is "default".

spring.cloud.config.request-connect-timeout

0

timeout on waiting to connect to the Config Server.

spring.cloud.config.request-read-timeout

0

timeout on waiting to read data from the Config Server.

spring.cloud.config.retry.initial-interval

1000

Initial retry interval in milliseconds.

spring.cloud.config.retry.max-attempts

6

Maximum number of attempts.

spring.cloud.config.retry.max-interval

2000

Maximum interval for backoff.

spring.cloud.config.retry.multiplier

1.1

Multiplier for next interval.

spring.cloud.config.send-state

true

Flag to indicate whether to send state. Default true.

spring.cloud.config.tls

TLS properties.

spring.cloud.config.token

Security Token passed thru to underlying environment repository.

spring.cloud.config.uri

[http://localhost:8888]

The URI of the remote server (default http://localhost:8888).

spring.cloud.config.username

The username to use (HTTP Basic) when contacting the remote server.

spring.cloud.consul.config.acl-token

spring.cloud.consul.config.data-key

data

If format is Format.PROPERTIES or Format.YAML then the following field is used as key to look up consul for configuration.

spring.cloud.consul.config.default-context

application

spring.cloud.consul.config.enabled

true

spring.cloud.consul.config.fail-fast

true

Throw exceptions during config lookup if true, otherwise, log warnings.

spring.cloud.consul.config.format

spring.cloud.consul.config.name

Alternative to spring.application.name to use in looking up values in consul KV.

spring.cloud.consul.config.prefix

config

spring.cloud.consul.config.profile-separator

,

spring.cloud.consul.config.watch.delay

1000

The value of the fixed delay for the watch in millis. Defaults to 1000.

spring.cloud.consul.config.watch.enabled

true

If the watch is enabled. Defaults to true.

spring.cloud.consul.config.watch.wait-time

55

The number of seconds to wait (or block) for watch query, defaults to 55. Needs to be less than default ConsulClient (defaults to 60). To increase ConsulClient timeout create a ConsulClient bean with a custom ConsulRawClient with a custom HttpClient.

spring.cloud.consul.discovery.acl-token

spring.cloud.consul.discovery.catalog-services-watch-delay

1000

The delay between calls to watch consul catalog in millis, default is 1000.

spring.cloud.consul.discovery.catalog-services-watch-timeout

2

The number of seconds to block while watching consul catalog, default is 2.

spring.cloud.consul.discovery.consistency-mode

Consistency mode for health service request.

spring.cloud.consul.discovery.datacenters

Map of serviceId's -> datacenter to query for in server list. This allows looking up services in another datacenters.

spring.cloud.consul.discovery.default-query-tag

Tag to query for in service list if one is not listed in serverListQueryTags.

spring.cloud.consul.discovery.default-zone-metadata-name

zone

Service instance zone comes from metadata. This allows changing the metadata tag name.

spring.cloud.consul.discovery.deregister

true

Disable automatic de-registration of service in consul.

spring.cloud.consul.discovery.enable-tag-override

Enable tag override for the registered service.

spring.cloud.consul.discovery.enabled

true

Is service discovery enabled?

spring.cloud.consul.discovery.fail-fast

true

Throw exceptions during service registration if true, otherwise, log warnings (defaults to true).

spring.cloud.consul.discovery.health-check-critical-timeout

Timeout to deregister services critical for longer than timeout (e.g. 30m). Requires consul version 7.x or higher.

spring.cloud.consul.discovery.health-check-headers

Headers to be applied to the Health Check calls.

spring.cloud.consul.discovery.health-check-interval

10s

How often to perform the health check (e.g. 10s), defaults to 10s.

spring.cloud.consul.discovery.health-check-path

/actuator/health

Alternate server path to invoke for health checking.

spring.cloud.consul.discovery.health-check-timeout

Timeout for health check (e.g. 10s).

spring.cloud.consul.discovery.health-check-tls-skip-verify

Skips certificate verification during service checks if true, otherwise runs certificate verification.

spring.cloud.consul.discovery.health-check-url

Custom health check url to override default.

spring.cloud.consul.discovery.heartbeat.enabled

false

spring.cloud.consul.discovery.heartbeat.interval-ratio

spring.cloud.consul.discovery.heartbeat.ttl-unit

s

spring.cloud.consul.discovery.heartbeat.ttl-value

30

spring.cloud.consul.discovery.hostname

Hostname to use when accessing server.

spring.cloud.consul.discovery.include-hostname-in-instance-id

false

Whether hostname is included into the default instance id when registering service.

spring.cloud.consul.discovery.instance-group

Service instance group.

spring.cloud.consul.discovery.instance-id

Unique service instance id.

spring.cloud.consul.discovery.instance-zone

Service instance zone.

spring.cloud.consul.discovery.ip-address

IP address to use when accessing service (must also set preferIpAddress to use).

spring.cloud.consul.discovery.lifecycle.enabled

true

spring.cloud.consul.discovery.management-enable-tag-override

Enable tag override for the registered management service.

spring.cloud.consul.discovery.management-metadata

Metadata to use when registering management service.

spring.cloud.consul.discovery.management-port

Port to register the management service under (defaults to management port).

spring.cloud.consul.discovery.management-suffix

management

Suffix to use when registering management service.

spring.cloud.consul.discovery.management-tags

Tags to use when registering management service.

spring.cloud.consul.discovery.metadata

Metadata to use when registering service.

spring.cloud.consul.discovery.order

0

Order of the discovery client used by `CompositeDiscoveryClient` for sorting available clients.

spring.cloud.consul.discovery.port

Port to register the service under (defaults to listening port).

spring.cloud.consul.discovery.prefer-agent-address

false

Source of how we will determine the address to use.

spring.cloud.consul.discovery.prefer-ip-address

false

Use ip address rather than hostname during registration.

spring.cloud.consul.discovery.query-passing

false

Add the 'passing` parameter to /v1/health/service/serviceName. This pushes health check passing to the server.

spring.cloud.consul.discovery.register

true

Register as a service in consul.

spring.cloud.consul.discovery.register-health-check

true

Register health check in consul. Useful during development of a service.

spring.cloud.consul.discovery.scheme

http

Whether to register an http or https service.

spring.cloud.consul.discovery.server-list-query-tags

Map of serviceId's -> tag to query for in server list. This allows filtering services by a single tag.

spring.cloud.consul.discovery.service-name

Service name.

spring.cloud.consul.discovery.tags

Tags to use when registering service.

spring.cloud.consul.discovery.tags-as-metadata

true

Use tags as metadata, defaults to true.

spring.cloud.consul.enabled

true

Is spring cloud consul enabled.

spring.cloud.consul.host

localhost

Consul agent hostname. Defaults to 'localhost'.

spring.cloud.consul.port

8500

Consul agent port. Defaults to '8500'.

spring.cloud.consul.retry.enabled

true

If consul retry is enabled.

spring.cloud.consul.retry.initial-interval

1000

Initial retry interval in milliseconds.

spring.cloud.consul.retry.max-attempts

6

Maximum number of attempts.

spring.cloud.consul.retry.max-interval

2000

Maximum interval for backoff.

spring.cloud.consul.retry.multiplier

1.1

Multiplier for next interval.

spring.cloud.consul.scheme

Consul agent scheme (HTTP/HTTPS). If there is no scheme in address - client will use HTTP.

spring.cloud.consul.service-registry.auto-registration.enabled

true

Enables Consul Service Registry Auto-registration.

spring.cloud.consul.service-registry.enabled

true

Enables Consul Service Registry functionality.

spring.cloud.consul.tls.certificate-password

Password to open the certificate.

spring.cloud.consul.tls.certificate-path

File path to the certificate.

spring.cloud.consul.tls.key-store-instance-type

Type of key framework to use.

spring.cloud.consul.tls.key-store-password

Password to an external keystore.

spring.cloud.consul.tls.key-store-path

Path to an external keystore.

spring.cloud.discovery.client.composite-indicator.enabled

true

Enables discovery client composite health indicator.

spring.cloud.discovery.client.health-indicator.enabled

true

spring.cloud.discovery.client.health-indicator.include-description

false

spring.cloud.discovery.client.simple.instances

spring.cloud.discovery.client.simple.local.instance-id

The unique identifier or name for the service instance.

spring.cloud.discovery.client.simple.local.metadata

Metadata for the service instance. Can be used by discovery clients to modify their behaviour per instance, e.g. when load balancing.

spring.cloud.discovery.client.simple.local.service-id

The identifier or name for the service. Multiple instances might share the same service ID.

spring.cloud.discovery.client.simple.local.uri

The URI of the service instance. Will be parsed to extract the scheme, host, and port.

spring.cloud.discovery.client.simple.order

spring.cloud.discovery.enabled

true

Enables discovery client health indicators.

spring.cloud.features.enabled

true

Enables the features endpoint.

spring.cloud.gateway.default-filters

List of filter definitions that are applied to every route.

spring.cloud.gateway.discovery.locator.enabled

false

Flag that enables DiscoveryClient gateway integration.

spring.cloud.gateway.discovery.locator.filters

spring.cloud.gateway.discovery.locator.include-expression

true

SpEL expression that will evaluate whether to include a service in gateway integration or not, defaults to: true.

spring.cloud.gateway.discovery.locator.lower-case-service-id

false

Option to lower case serviceId in predicates and filters, defaults to false. Useful with eureka when it automatically uppercases serviceId. so MYSERIVCE, would match /myservice/**

spring.cloud.gateway.discovery.locator.predicates

spring.cloud.gateway.discovery.locator.route-id-prefix

The prefix for the routeId, defaults to discoveryClient.getClass().getSimpleName() + "_". Service Id will be appended to create the routeId.

spring.cloud.gateway.discovery.locator.url-expression

'lb://'+serviceId

SpEL expression that create the uri for each route, defaults to: 'lb://'+serviceId.

spring.cloud.gateway.enabled

true

Enables gateway functionality.

spring.cloud.gateway.fail-on-route-definition-error

true

Option to fail on route definition errors, defaults to true. Otherwise, a warning is logged.

spring.cloud.gateway.filter.remove-hop-by-hop.headers

spring.cloud.gateway.filter.remove-hop-by-hop.order

spring.cloud.gateway.filter.request-rate-limiter.deny-empty-key

true

Switch to deny requests if the Key Resolver returns an empty key, defaults to true.

spring.cloud.gateway.filter.request-rate-limiter.empty-key-status-code

HttpStatus to return when denyEmptyKey is true, defaults to FORBIDDEN.

spring.cloud.gateway.filter.secure-headers.content-security-policy

default-src 'self' https:; font-src 'self' https: data:; img-src 'self' https: data:; object-src 'none'; script-src https:; style-src 'self' https: 'unsafe-inline'

spring.cloud.gateway.filter.secure-headers.content-type-options

nosniff

spring.cloud.gateway.filter.secure-headers.disable

spring.cloud.gateway.filter.secure-headers.download-options

noopen

spring.cloud.gateway.filter.secure-headers.frame-options

DENY

spring.cloud.gateway.filter.secure-headers.permitted-cross-domain-policies

none

spring.cloud.gateway.filter.secure-headers.referrer-policy

no-referrer

spring.cloud.gateway.filter.secure-headers.strict-transport-security

max-age=631138519

spring.cloud.gateway.filter.secure-headers.xss-protection-header

1 ; mode=block

spring.cloud.gateway.forwarded.enabled

true

Enables the ForwardedHeadersFilter.

spring.cloud.gateway.globalcors.add-to-simple-url-handler-mapping

false

If global CORS config should be added to the URL handler.

spring.cloud.gateway.globalcors.cors-configurations

spring.cloud.gateway.httpclient.connect-timeout

The connect timeout in millis, the default is 45s.

spring.cloud.gateway.httpclient.max-header-size

The max response header size.

spring.cloud.gateway.httpclient.max-initial-line-length

The max initial line length.

spring.cloud.gateway.httpclient.pool.acquire-timeout

Only for type FIXED, the maximum time in millis to wait for aquiring.

spring.cloud.gateway.httpclient.pool.max-connections

Only for type FIXED, the maximum number of connections before starting pending acquisition on existing ones.

spring.cloud.gateway.httpclient.pool.max-idle-time

Time in millis after which the channel will be closed. If NULL, there is no max idle time.

spring.cloud.gateway.httpclient.pool.max-life-time

Duration after which the channel will be closed. If NULL, there is no max life time.

spring.cloud.gateway.httpclient.pool.name

proxy

The channel pool map name, defaults to proxy.

spring.cloud.gateway.httpclient.pool.type

Type of pool for HttpClient to use, defaults to ELASTIC.

spring.cloud.gateway.httpclient.proxy.host

Hostname for proxy configuration of Netty HttpClient.

spring.cloud.gateway.httpclient.proxy.non-proxy-hosts-pattern

Regular expression (Java) for a configured list of hosts. that should be reached directly, bypassing the proxy

spring.cloud.gateway.httpclient.proxy.password

Password for proxy configuration of Netty HttpClient.

spring.cloud.gateway.httpclient.proxy.port

Port for proxy configuration of Netty HttpClient.

spring.cloud.gateway.httpclient.proxy.username

Username for proxy configuration of Netty HttpClient.

spring.cloud.gateway.httpclient.response-timeout

The response timeout.

spring.cloud.gateway.httpclient.ssl.close-notify-flush-timeout

3000ms

SSL close_notify flush timeout. Default to 3000 ms.

spring.cloud.gateway.httpclient.ssl.close-notify-flush-timeout-millis

spring.cloud.gateway.httpclient.ssl.close-notify-read-timeout

SSL close_notify read timeout. Default to 0 ms.

spring.cloud.gateway.httpclient.ssl.close-notify-read-timeout-millis

spring.cloud.gateway.httpclient.ssl.default-configuration-type

The default ssl configuration type. Defaults to TCP.

spring.cloud.gateway.httpclient.ssl.handshake-timeout

10000ms

SSL handshake timeout. Default to 10000 ms

spring.cloud.gateway.httpclient.ssl.handshake-timeout-millis

spring.cloud.gateway.httpclient.ssl.key-password

Key password, default is same as keyStorePassword.

spring.cloud.gateway.httpclient.ssl.key-store

Keystore path for Netty HttpClient.

spring.cloud.gateway.httpclient.ssl.key-store-password

Keystore password.

spring.cloud.gateway.httpclient.ssl.key-store-provider

Keystore provider for Netty HttpClient, optional field.

spring.cloud.gateway.httpclient.ssl.key-store-type

JKS

Keystore type for Netty HttpClient, default is JKS.

spring.cloud.gateway.httpclient.ssl.trusted-x509-certificates

Trusted certificates for verifying the remote endpoint's certificate.

spring.cloud.gateway.httpclient.ssl.use-insecure-trust-manager

false

Installs the netty InsecureTrustManagerFactory. This is insecure and not suitable for production.

spring.cloud.gateway.httpclient.websocket.max-frame-payload-length

Max frame payload length.

spring.cloud.gateway.httpclient.websocket.proxy-ping

true

Proxy ping frames to downstream services, defaults to true.

spring.cloud.gateway.httpclient.wiretap

false

Enables wiretap debugging for Netty HttpClient.

spring.cloud.gateway.httpserver.wiretap

false

Enables wiretap debugging for Netty HttpServer.

spring.cloud.gateway.loadbalancer.use404

false

spring.cloud.gateway.metrics.enabled

true

Enables the collection of metrics data.

spring.cloud.gateway.metrics.tags

Tags map that added to metrics.

spring.cloud.gateway.redis-rate-limiter.burst-capacity-header

X-RateLimit-Burst-Capacity

The name of the header that returns the burst capacity configuration.

spring.cloud.gateway.redis-rate-limiter.config

spring.cloud.gateway.redis-rate-limiter.include-headers

true

Whether or not to include headers containing rate limiter information, defaults to true.

spring.cloud.gateway.redis-rate-limiter.remaining-header

X-RateLimit-Remaining

The name of the header that returns number of remaining requests during the current second.

spring.cloud.gateway.redis-rate-limiter.replenish-rate-header

X-RateLimit-Replenish-Rate

The name of the header that returns the replenish rate configuration.

spring.cloud.gateway.redis-rate-limiter.requested-tokens-header

X-RateLimit-Requested-Tokens

The name of the header that returns the requested tokens configuration.

spring.cloud.gateway.routes

List of Routes.

spring.cloud.gateway.set-status.original-status-header-name

The name of the header which contains http code of the proxied request.

spring.cloud.gateway.streaming-media-types

spring.cloud.gateway.x-forwarded.enabled

true

If the XForwardedHeadersFilter is enabled.

spring.cloud.gateway.x-forwarded.for-append

true

If appending X-Forwarded-For as a list is enabled.

spring.cloud.gateway.x-forwarded.for-enabled

true

If X-Forwarded-For is enabled.

spring.cloud.gateway.x-forwarded.host-append

true

If appending X-Forwarded-Host as a list is enabled.

spring.cloud.gateway.x-forwarded.host-enabled

true

If X-Forwarded-Host is enabled.

spring.cloud.gateway.x-forwarded.order

0

The order of the XForwardedHeadersFilter.

spring.cloud.gateway.x-forwarded.port-append

true

If appending X-Forwarded-Port as a list is enabled.

spring.cloud.gateway.x-forwarded.port-enabled

true

If X-Forwarded-Port is enabled.

spring.cloud.gateway.x-forwarded.prefix-append

true

If appending X-Forwarded-Prefix as a list is enabled.

spring.cloud.gateway.x-forwarded.prefix-enabled

true

If X-Forwarded-Prefix is enabled.

spring.cloud.gateway.x-forwarded.proto-append

true

If appending X-Forwarded-Proto as a list is enabled.

spring.cloud.gateway.x-forwarded.proto-enabled

true

If X-Forwarded-Proto is enabled.

spring.cloud.gcp.bigquery.credentials.encoded-key

spring.cloud.gcp.bigquery.credentials.location

spring.cloud.gcp.bigquery.credentials.scopes

spring.cloud.gcp.bigquery.dataset-name

Name of the BigQuery dataset to use.

spring.cloud.gcp.bigquery.enabled

true

Auto-configure Google Cloud BigQuery components.

spring.cloud.gcp.bigquery.project-id

Overrides the GCP project ID specified in the Core module to use for BigQuery.

spring.cloud.gcp.config.credentials.encoded-key

spring.cloud.gcp.config.credentials.location

spring.cloud.gcp.config.credentials.scopes

spring.cloud.gcp.config.enabled

true

Auto-configure Google Cloud Runtime components.

spring.cloud.gcp.config.name

Name of the application.

spring.cloud.gcp.config.profile

Comma-delimited string of profiles under which the app is running. Gets its default value from the {@code spring.profiles.active} property, falling back on the {@code spring.profiles.default} property.

spring.cloud.gcp.config.project-id

Overrides the GCP project ID specified in the Core module.

spring.cloud.gcp.config.timeout-millis

60000

Timeout for Google Runtime Configuration API calls.

spring.cloud.gcp.core.enabled

true

Auto-configure Google Cloud Core components.

spring.cloud.gcp.credentials.encoded-key

spring.cloud.gcp.credentials.location

spring.cloud.gcp.credentials.scopes

spring.cloud.gcp.datastore.credentials.encoded-key

spring.cloud.gcp.datastore.credentials.location

spring.cloud.gcp.datastore.credentials.scopes

spring.cloud.gcp.datastore.emulator-host

@deprecated use <code>spring.cloud.gcp.datastore.host</code> instead. @see #host

spring.cloud.gcp.datastore.emulator.consistency

0.9

Consistency to use creating the Datastore server instance. Default: {@code 0.9}

spring.cloud.gcp.datastore.emulator.enabled

false

If enabled the Datastore client will connect to an local datastore emulator.

spring.cloud.gcp.datastore.emulator.port

8081

Is the datastore emulator port. Default: {@code 8081}

spring.cloud.gcp.datastore.enabled

true

Auto-configure Google Cloud Datastore components.

spring.cloud.gcp.datastore.host

The host and port of a Datastore emulator as the following example: localhost:8081.

spring.cloud.gcp.datastore.namespace

spring.cloud.gcp.datastore.project-id

spring.cloud.gcp.firestore.credentials.encoded-key

spring.cloud.gcp.firestore.credentials.location

spring.cloud.gcp.firestore.credentials.scopes

spring.cloud.gcp.firestore.emulator.enabled

false

Enables autoconfiguration to use the Firestore emulator.

spring.cloud.gcp.firestore.enabled

true

Auto-configure Google Cloud Firestore components.

spring.cloud.gcp.firestore.host-port

firestore.googleapis.com:443

The host and port of the Firestore emulator service; can be overridden to specify an emulator.

spring.cloud.gcp.firestore.project-id

spring.cloud.gcp.logging.enabled

true

Auto-configure Google Cloud Stackdriver logging for Spring MVC.

spring.cloud.gcp.metrics.credentials.encoded-key

spring.cloud.gcp.metrics.credentials.location

spring.cloud.gcp.metrics.credentials.scopes

spring.cloud.gcp.metrics.enabled

true

Auto-configure Google Cloud Monitoring for Micrometer.

spring.cloud.gcp.metrics.project-id

Overrides the GCP project ID specified in the Core module.

spring.cloud.gcp.project-id

GCP project ID where services are running.

spring.cloud.gcp.pubsub.credentials.encoded-key

spring.cloud.gcp.pubsub.credentials.location

spring.cloud.gcp.pubsub.credentials.scopes

spring.cloud.gcp.pubsub.emulator-host

The host and port of the local running emulator. If provided, this will setup the client to connect against a running pub/sub emulator.

spring.cloud.gcp.pubsub.enabled

true

Auto-configure Google Cloud Pub/Sub components.

spring.cloud.gcp.pubsub.keep-alive-interval-minutes

5

How often to ping the server to keep the channel alive.

spring.cloud.gcp.pubsub.project-id

Overrides the GCP project ID specified in the Core module.

spring.cloud.gcp.pubsub.publisher.batching.delay-threshold-seconds

The delay threshold to use for batching. After this amount of time has elapsed (counting from the first element added), the elements will be wrapped up in a batch and sent.

spring.cloud.gcp.pubsub.publisher.batching.element-count-threshold

The element count threshold to use for batching.

spring.cloud.gcp.pubsub.publisher.batching.enabled

Enables batching if true.

spring.cloud.gcp.pubsub.publisher.batching.flow-control.limit-exceeded-behavior

The behavior when the specified limits are exceeded.

spring.cloud.gcp.pubsub.publisher.batching.flow-control.max-outstanding-element-count

Maximum number of outstanding elements to keep in memory before enforcing flow control.

spring.cloud.gcp.pubsub.publisher.batching.flow-control.max-outstanding-request-bytes

Maximum number of outstanding bytes to keep in memory before enforcing flow control.

spring.cloud.gcp.pubsub.publisher.batching.request-byte-threshold

The request byte threshold to use for batching.

spring.cloud.gcp.pubsub.publisher.executor-threads

4

Number of threads used by every publisher.

spring.cloud.gcp.pubsub.publisher.retry.initial-retry-delay-seconds

InitialRetryDelay controls the delay before the first retry. Subsequent retries will use this value adjusted according to the RetryDelayMultiplier.

spring.cloud.gcp.pubsub.publisher.retry.initial-rpc-timeout-seconds

InitialRpcTimeout controls the timeout for the initial RPC. Subsequent calls will use this value adjusted according to the RpcTimeoutMultiplier.

spring.cloud.gcp.pubsub.publisher.retry.jittered

Jitter determines if the delay time should be randomized.

spring.cloud.gcp.pubsub.publisher.retry.max-attempts

MaxAttempts defines the maximum number of attempts to perform. If this value is greater than 0, and the number of attempts reaches this limit, the logic will give up retrying even if the total retry time is still lower than TotalTimeout.

spring.cloud.gcp.pubsub.publisher.retry.max-retry-delay-seconds

MaxRetryDelay puts a limit on the value of the retry delay, so that the RetryDelayMultiplier can't increase the retry delay higher than this amount.

spring.cloud.gcp.pubsub.publisher.retry.max-rpc-timeout-seconds

MaxRpcTimeout puts a limit on the value of the RPC timeout, so that the RpcTimeoutMultiplier can't increase the RPC timeout higher than this amount.

spring.cloud.gcp.pubsub.publisher.retry.retry-delay-multiplier

RetryDelayMultiplier controls the change in retry delay. The retry delay of the previous call is multiplied by the RetryDelayMultiplier to calculate the retry delay for the next call.

spring.cloud.gcp.pubsub.publisher.retry.rpc-timeout-multiplier

RpcTimeoutMultiplier controls the change in RPC timeout. The timeout of the previous call is multiplied by the RpcTimeoutMultiplier to calculate the timeout for the next call.

spring.cloud.gcp.pubsub.publisher.retry.total-timeout-seconds

TotalTimeout has ultimate control over how long the logic should keep trying the remote call until it gives up completely. The higher the total timeout, the more retries can be attempted.

spring.cloud.gcp.pubsub.reactive.enabled

true

Auto-configure Google Cloud Pub/Sub Reactive components.

spring.cloud.gcp.pubsub.subscriber.executor-threads

4

Number of threads used by every subscriber.

spring.cloud.gcp.pubsub.subscriber.flow-control.limit-exceeded-behavior

The behavior when the specified limits are exceeded.

spring.cloud.gcp.pubsub.subscriber.flow-control.max-outstanding-element-count

Maximum number of outstanding elements to keep in memory before enforcing flow control.

spring.cloud.gcp.pubsub.subscriber.flow-control.max-outstanding-request-bytes

Maximum number of outstanding bytes to keep in memory before enforcing flow control.

spring.cloud.gcp.pubsub.subscriber.max-ack-extension-period

0

The optional max ack extension period in seconds for the subscriber factory.

spring.cloud.gcp.pubsub.subscriber.max-acknowledgement-threads

4

Number of threads used for batch acknowledgement.

spring.cloud.gcp.pubsub.subscriber.parallel-pull-count

The optional parallel pull count setting for the subscriber factory.

spring.cloud.gcp.pubsub.subscriber.pull-endpoint

The optional pull endpoint setting for the subscriber factory.

spring.cloud.gcp.pubsub.subscriber.retry.initial-retry-delay-seconds

InitialRetryDelay controls the delay before the first retry. Subsequent retries will use this value adjusted according to the RetryDelayMultiplier.

spring.cloud.gcp.pubsub.subscriber.retry.initial-rpc-timeout-seconds

InitialRpcTimeout controls the timeout for the initial RPC. Subsequent calls will use this value adjusted according to the RpcTimeoutMultiplier.

spring.cloud.gcp.pubsub.subscriber.retry.jittered

Jitter determines if the delay time should be randomized.

spring.cloud.gcp.pubsub.subscriber.retry.max-attempts

MaxAttempts defines the maximum number of attempts to perform. If this value is greater than 0, and the number of attempts reaches this limit, the logic will give up retrying even if the total retry time is still lower than TotalTimeout.

spring.cloud.gcp.pubsub.subscriber.retry.max-retry-delay-seconds

MaxRetryDelay puts a limit on the value of the retry delay, so that the RetryDelayMultiplier can't increase the retry delay higher than this amount.

spring.cloud.gcp.pubsub.subscriber.retry.max-rpc-timeout-seconds

MaxRpcTimeout puts a limit on the value of the RPC timeout, so that the RpcTimeoutMultiplier can't increase the RPC timeout higher than this amount.

spring.cloud.gcp.pubsub.subscriber.retry.retry-delay-multiplier

RetryDelayMultiplier controls the change in retry delay. The retry delay of the previous call is multiplied by the RetryDelayMultiplier to calculate the retry delay for the next call.

spring.cloud.gcp.pubsub.subscriber.retry.rpc-timeout-multiplier

RpcTimeoutMultiplier controls the change in RPC timeout. The timeout of the previous call is multiplied by the RpcTimeoutMultiplier to calculate the timeout for the next call.

spring.cloud.gcp.pubsub.subscriber.retry.total-timeout-seconds

TotalTimeout has ultimate control over how long the logic should keep trying the remote call until it gives up completely. The higher the total timeout, the more retries can be attempted.

spring.cloud.gcp.secretmanager.credentials.encoded-key

spring.cloud.gcp.secretmanager.credentials.location

spring.cloud.gcp.secretmanager.credentials.scopes

spring.cloud.gcp.secretmanager.enabled

true

Auto-configure GCP Secret Manager support components.

spring.cloud.gcp.secretmanager.project-id

Overrides the GCP Project ID specified in the Core module.

spring.cloud.gcp.security.firebase.project-id

Overrides the GCP project ID specified in the Core module.

spring.cloud.gcp.security.firebase.public-keys-endpoint

https://www.googleapis.com/robot/v1/metadata/x509/[email protected]

Link to Google's public endpoint containing Firebase public keys.

spring.cloud.gcp.security.iap.algorithm

ES256

Encryption algorithm used to sign the JWK token.

spring.cloud.gcp.security.iap.audience

Non-dynamic audience string to validate.

spring.cloud.gcp.security.iap.enabled

true

Auto-configure Google Cloud IAP identity extraction components.

spring.cloud.gcp.security.iap.header

x-goog-iap-jwt-assertion

Header from which to extract the JWK key.

spring.cloud.gcp.security.iap.issuer

https://cloud.google.com/iap

JWK issuer to verify.

spring.cloud.gcp.security.iap.registry

https://www.gstatic.com/iap/verify/public_key-jwk

Link to JWK public key registry.

spring.cloud.gcp.spanner.create-interleaved-table-ddl-on-delete-cascade

true

spring.cloud.gcp.spanner.credentials.encoded-key

spring.cloud.gcp.spanner.credentials.location

spring.cloud.gcp.spanner.credentials.scopes

spring.cloud.gcp.spanner.database

spring.cloud.gcp.spanner.emulator-host

localhost:9010

spring.cloud.gcp.spanner.emulator.enabled

false

Enables auto-configuration to use the Spanner emulator.

spring.cloud.gcp.spanner.enabled

true

Auto-configure Google Cloud Spanner components.

spring.cloud.gcp.spanner.fail-if-pool-exhausted

false

spring.cloud.gcp.spanner.instance-id

spring.cloud.gcp.spanner.keep-alive-interval-minutes

-1

spring.cloud.gcp.spanner.max-idle-sessions

-1

spring.cloud.gcp.spanner.max-sessions

-1

spring.cloud.gcp.spanner.min-sessions

-1

spring.cloud.gcp.spanner.num-rpc-channels

-1

spring.cloud.gcp.spanner.prefetch-chunks

-1

spring.cloud.gcp.spanner.project-id

spring.cloud.gcp.spanner.write-sessions-fraction

-1

spring.cloud.gcp.sql.credentials

Overrides the GCP OAuth2 credentials specified in the Core module.

spring.cloud.gcp.sql.database-name

Name of the database in the Cloud SQL instance.

spring.cloud.gcp.sql.enabled

true

Auto-configure Google Cloud SQL support components.

spring.cloud.gcp.sql.instance-connection-name

Cloud SQL instance connection name. [GCP_PROJECT_ID]:[INSTANCE_REGION]:[INSTANCE_NAME].

spring.cloud.gcp.storage.auto-create-files

spring.cloud.gcp.storage.credentials.encoded-key

spring.cloud.gcp.storage.credentials.location

spring.cloud.gcp.storage.credentials.scopes

spring.cloud.gcp.storage.enabled

true

Auto-configure Google Cloud Storage components.

spring.cloud.gcp.storage.project-id

spring.cloud.gcp.trace.authority

HTTP/2 authority the channel claims to be connecting to.

spring.cloud.gcp.trace.compression

Compression to use for the call.

spring.cloud.gcp.trace.credentials.encoded-key

spring.cloud.gcp.trace.credentials.location

spring.cloud.gcp.trace.credentials.scopes

spring.cloud.gcp.trace.deadline-ms

Call deadline.

spring.cloud.gcp.trace.enabled

true

Auto-configure Google Cloud Stackdriver tracing components.

spring.cloud.gcp.trace.max-inbound-size

Maximum size for an inbound message.

spring.cloud.gcp.trace.max-outbound-size

Maximum size for an outbound message.

spring.cloud.gcp.trace.message-timeout

1

Timeout in seconds before pending spans will be sent in batches to GCP Stackdriver Trace.

spring.cloud.gcp.trace.num-executor-threads

4

Number of threads to be used by the Trace executor.

spring.cloud.gcp.trace.project-id

Overrides the GCP project ID specified in the Core module.

spring.cloud.gcp.trace.wait-for-ready

Waits for the channel to be ready in case of a transient failure. Defaults to failing fast in that case.

spring.cloud.gcp.vision.credentials.encoded-key

spring.cloud.gcp.vision.credentials.location

spring.cloud.gcp.vision.credentials.scopes

spring.cloud.gcp.vision.enabled

true

Auto-configure Google Cloud Vision components.

spring.cloud.gcp.vision.executor-threads-count

1

Number of threads used to poll for the completion of Document OCR operations.

spring.cloud.gcp.vision.json-output-batch-size

20

Number of document pages to include in each JSON output file.

spring.cloud.httpclientfactories.apache.enabled

true

Enables creation of Apache Http Client factory beans.

spring.cloud.httpclientfactories.ok.enabled

true

Enables creation of OK Http Client factory beans.

spring.cloud.hypermedia.refresh.fixed-delay

5000

spring.cloud.hypermedia.refresh.initial-delay

10000

spring.cloud.inetutils.default-hostname

localhost

The default hostname. Used in case of errors.

spring.cloud.inetutils.default-ip-address

127.0.0.1

The default IP address. Used in case of errors.

spring.cloud.inetutils.ignored-interfaces

List of Java regular expressions for network interfaces that will be ignored.

spring.cloud.inetutils.preferred-networks

List of Java regular expressions for network addresses that will be preferred.

spring.cloud.inetutils.timeout-seconds

1

Timeout, in seconds, for calculating hostname.

spring.cloud.inetutils.use-only-site-local-interfaces

false

Whether to use only interfaces with site local addresses. See {@link InetAddress#isSiteLocalAddress()} for more details.

spring.cloud.kubernetes.client.api-version

spring.cloud.kubernetes.client.apiVersion

v1

Kubernetes API Version

spring.cloud.kubernetes.client.ca-cert-data

spring.cloud.kubernetes.client.ca-cert-file

spring.cloud.kubernetes.client.caCertData

Kubernetes API CACertData

spring.cloud.kubernetes.client.caCertFile

Kubernetes API CACertFile

spring.cloud.kubernetes.client.client-cert-data

spring.cloud.kubernetes.client.client-cert-file

spring.cloud.kubernetes.client.client-key-algo

spring.cloud.kubernetes.client.client-key-data

spring.cloud.kubernetes.client.client-key-file

spring.cloud.kubernetes.client.client-key-passphrase

spring.cloud.kubernetes.client.clientCertData

Kubernetes API ClientCertData

spring.cloud.kubernetes.client.clientCertFile

Kubernetes API ClientCertFile

spring.cloud.kubernetes.client.clientKeyAlgo

RSA

Kubernetes API ClientKeyAlgo

spring.cloud.kubernetes.client.clientKeyData

Kubernetes API ClientKeyData

spring.cloud.kubernetes.client.clientKeyFile

Kubernetes API ClientKeyFile

spring.cloud.kubernetes.client.clientKeyPassphrase

changeit

Kubernetes API ClientKeyPassphrase

spring.cloud.kubernetes.client.connection-timeout

spring.cloud.kubernetes.client.connectionTimeout

10s

Connection timeout

spring.cloud.kubernetes.client.http-proxy

spring.cloud.kubernetes.client.https-proxy

spring.cloud.kubernetes.client.logging-interval

spring.cloud.kubernetes.client.loggingInterval

20s

Logging interval

spring.cloud.kubernetes.client.master-url

spring.cloud.kubernetes.client.masterUrl

https://kubernetes.default.svc

Kubernetes API Master Node URL

spring.cloud.kubernetes.client.namespace

true

Kubernetes Namespace

spring.cloud.kubernetes.client.no-proxy

spring.cloud.kubernetes.client.password

Kubernetes API Password

spring.cloud.kubernetes.client.proxy-password

spring.cloud.kubernetes.client.proxy-username

spring.cloud.kubernetes.client.request-timeout

spring.cloud.kubernetes.client.requestTimeout

10s

Request timeout

spring.cloud.kubernetes.client.rolling-timeout

spring.cloud.kubernetes.client.rollingTimeout

900s

Rolling timeout

spring.cloud.kubernetes.client.trust-certs

spring.cloud.kubernetes.client.trustCerts

false

Kubernetes API Trust Certificates

spring.cloud.kubernetes.client.username

Kubernetes API Username

spring.cloud.kubernetes.client.watch-reconnect-interval

spring.cloud.kubernetes.client.watch-reconnect-limit

spring.cloud.kubernetes.client.watchReconnectInterval

1s

Reconnect Interval

spring.cloud.kubernetes.client.watchReconnectLimit

-1

Reconnect Interval limit retries

spring.cloud.kubernetes.config.enable-api

true

spring.cloud.kubernetes.config.enabled

true

Enable the ConfigMap property source locator.

spring.cloud.kubernetes.config.name

spring.cloud.kubernetes.config.namespace

spring.cloud.kubernetes.config.paths

spring.cloud.kubernetes.config.sources

spring.cloud.kubernetes.discovery.all-namespaces

false

If discovering all namespaces.

spring.cloud.kubernetes.discovery.enabled

true

If Kubernetes Discovery is enabled.

spring.cloud.kubernetes.discovery.filter

SpEL expression to filter services AFTER they have been retrieved from the Kubernetes API server.

spring.cloud.kubernetes.discovery.known-secure-ports

Set the port numbers that are considered secure and use HTTPS.

spring.cloud.kubernetes.discovery.metadata.add-annotations

true

When set, the Kubernetes annotations of the services will be included as metadata of the returned ServiceInstance.

spring.cloud.kubernetes.discovery.metadata.add-labels

true

When set, the Kubernetes labels of the services will be included as metadata of the returned ServiceInstance.

spring.cloud.kubernetes.discovery.metadata.add-ports

true

When set, any named Kubernetes service ports will be included as metadata of the returned ServiceInstance.

spring.cloud.kubernetes.discovery.metadata.annotations-prefix

When addAnnotations is set, then this will be used as a prefix to the key names in the metadata map.

spring.cloud.kubernetes.discovery.metadata.labels-prefix

When addLabels is set, then this will be used as a prefix to the key names in the metadata map.

spring.cloud.kubernetes.discovery.metadata.ports-prefix

port.

When addPorts is set, then this will be used as a prefix to the key names in the metadata map.

spring.cloud.kubernetes.discovery.order

spring.cloud.kubernetes.discovery.primary-port-name

If set then the port with a given name is used as primary when multiple ports are defined for a service.

spring.cloud.kubernetes.discovery.service-labels

If set, then only the services matching these labels will be fetched from the Kubernetes API server.

spring.cloud.kubernetes.discovery.service-name

unknown

The service name of the local instance.

spring.cloud.kubernetes.enabled

true

Whether to enable Kubernetes integration.

spring.cloud.kubernetes.loadbalancer.cluster-domain

cluster.local

cluster domain.

spring.cloud.kubernetes.loadbalancer.enabled

true

Load balancer enabled,default true.

spring.cloud.kubernetes.loadbalancer.mode

{@link KubernetesLoadBalancerMode} setting load balancer server list with ip of pod or service name. default value is POD.

spring.cloud.kubernetes.loadbalancer.port-name

http

service port name.

spring.cloud.kubernetes.reload.enabled

false

Enables the Kubernetes configuration reload on change.

spring.cloud.kubernetes.reload.max-wait-for-restart

2s

If Restart or Shutdown strategies are used, Spring Cloud Kubernetes waits a random amount of time before restarting. This is done in order to avoid having all instances of the same application restart at the same time. This property configures the maximum of amount of wait time from the moment the signal is received that a restart is needed until the moment the restart is actually triggered

spring.cloud.kubernetes.reload.mode

Sets the detection mode for Kubernetes configuration reload.

spring.cloud.kubernetes.reload.monitoring-config-maps

true

Enables monitoring on config maps to detect changes.

spring.cloud.kubernetes.reload.monitoring-secrets

false

Enables monitoring on secrets to detect changes.

spring.cloud.kubernetes.reload.period

15000ms

Sets the polling period to use when the detection mode is POLLING.

spring.cloud.kubernetes.reload.strategy

Sets the reload strategy for Kubernetes configuration reload on change.

spring.cloud.kubernetes.ribbon.cluster-domain

cluster.local

cluster domain.

spring.cloud.kubernetes.ribbon.enabled

true

Ribbon enabled,default true.

spring.cloud.kubernetes.ribbon.mode

{@link KubernetesRibbonMode} setting ribbon server list with ip of pod or service name. default value is POD.

spring.cloud.kubernetes.secrets.enable-api

false

spring.cloud.kubernetes.secrets.enabled

true

Enable the Secrets property source locator.

spring.cloud.kubernetes.secrets.labels

spring.cloud.kubernetes.secrets.name

spring.cloud.kubernetes.secrets.namespace

spring.cloud.kubernetes.secrets.paths

spring.cloud.kubernetes.secrets.sources

spring.cloud.loadbalancer.cache.caffeine.spec

The spec to use to create caches. See CaffeineSpec for more details on the spec format.

spring.cloud.loadbalancer.cache.capacity

256

Initial cache capacity expressed as int.

spring.cloud.loadbalancer.cache.enabled

true

Enables Spring Cloud LoadBalancer caching mechanism.

spring.cloud.loadbalancer.cache.ttl

35s

Time To Live - time counted from writing of the record, after which cache entries are expired, expressed as a {@link Duration}. The property {@link String} has to be in keeping with the appropriate syntax as specified in Spring Boot <code>StringToDurationConverter</code>. @see <a href= "https://github.com/spring-projects/spring-boot/blob/master/spring-boot-project/spring-boot/src/main/java/org/springframework/boot/convert/StringToDurationConverter.java">StringToDurationConverter.java</a>;

spring.cloud.loadbalancer.eureka.approximate-zone-from-hostname

false

Used to determine whether we should try to get the `zone` value from host name.

spring.cloud.loadbalancer.health-check.initial-delay

0

Initial delay value for the HealthCheck scheduler.

spring.cloud.loadbalancer.health-check.interval

25s

Interval for rerunning the HealthCheck scheduler.

spring.cloud.loadbalancer.health-check.path

spring.cloud.loadbalancer.retry.enabled

true

spring.cloud.loadbalancer.ribbon.enabled

true

Causes `RibbonLoadBalancerClient` to be used by default.

spring.cloud.loadbalancer.ribbon.enabled

true

Causes `RibbonLoadBalancerClient` to be used by default.

spring.cloud.loadbalancer.service-discovery.timeout

String representation of Duration of the timeout for calls to service discovery.

spring.cloud.loadbalancer.zone

Spring Cloud LoadBalancer zone.

spring.cloud.refresh.enabled

true

Enables autoconfiguration for the refresh scope and associated features.

spring.cloud.refresh.extra-refreshable

true

Additional class names for beans to post process into refresh scope.

spring.cloud.refresh.never-refreshable

true

Comma separated list of class names for beans to never be refreshed or rebound.

spring.cloud.service-registry.auto-registration.enabled

true

Whether service auto-registration is enabled. Defaults to true.

spring.cloud.service-registry.auto-registration.fail-fast

false

Whether startup fails if there is no AutoServiceRegistration. Defaults to false.

spring.cloud.service-registry.auto-registration.register-management

true

Whether to register the management as a service. Defaults to true.

spring.cloud.util.enabled

true

Enables creation of Spring Cloud utility beans.

spring.cloud.vault.app-id.app-id-path

app-id

Mount path of the AppId authentication backend.

spring.cloud.vault.app-id.network-interface

Network interface hint for the "MAC_ADDRESS" UserId mechanism.

spring.cloud.vault.app-id.user-id

MAC_ADDRESS

UserId mechanism. Can be either "MAC_ADDRESS", "IP_ADDRESS", a string or a class name.

spring.cloud.vault.app-role.app-role-path

approle

Mount path of the AppRole authentication backend.

spring.cloud.vault.app-role.role

Name of the role, optional, used for pull-mode.

spring.cloud.vault.app-role.role-id

The RoleId.

spring.cloud.vault.app-role.secret-id

The SecretId.

spring.cloud.vault.application-name

application

Application name for AppId authentication.

spring.cloud.vault.authentication

spring.cloud.vault.aws-ec2.aws-ec2-path

aws-ec2

Mount path of the AWS-EC2 authentication backend.

spring.cloud.vault.aws-ec2.identity-document

http://169.254.169.254/latest/dynamic/instance-identity/pkcs7

URL of the AWS-EC2 PKCS7 identity document.

spring.cloud.vault.aws-ec2.nonce

Nonce used for AWS-EC2 authentication. An empty nonce defaults to nonce generation.

spring.cloud.vault.aws-ec2.role

Name of the role, optional.

spring.cloud.vault.aws-iam.aws-path

aws

Mount path of the AWS authentication backend.

spring.cloud.vault.aws-iam.endpoint-uri

STS server URI. @since 2.2

spring.cloud.vault.aws-iam.role

Name of the role, optional. Defaults to the friendly IAM name if not set.

spring.cloud.vault.aws-iam.server-name

Name of the server used to set {@code X-Vault-AWS-IAM-Server-ID} header in the headers of login requests.

spring.cloud.vault.azure-msi.azure-path

azure

Mount path of the Azure MSI authentication backend.

spring.cloud.vault.azure-msi.role

Name of the role.

spring.cloud.vault.config.lifecycle.enabled

true

Enable lifecycle management.

spring.cloud.vault.config.lifecycle.expiry-threshold

The expiry threshold. {@link Lease} is renewed the given {@link Duration} before it expires. @since 2.2

spring.cloud.vault.config.lifecycle.lease-endpoints

Set the {@link LeaseEndpoints} to delegate renewal/revocation calls to. {@link LeaseEndpoints} encapsulates differences between Vault versions that affect the location of renewal/revocation endpoints. Can be {@link LeaseEndpoints#SysLeases} for version 0.8 or above of Vault or {@link LeaseEndpoints#Legacy} for older versions (the default). @since 2.2

spring.cloud.vault.config.lifecycle.min-renewal

The time period that is at least required before renewing a lease. @since 2.2

spring.cloud.vault.config.order

0

Used to set a {@link org.springframework.core.env.PropertySource} priority. This is useful to use Vault as an override on other property sources. @see org.springframework.core.PriorityOrdered

spring.cloud.vault.connection-timeout

5000

Connection timeout.

spring.cloud.vault.discovery.enabled

false

Flag to indicate that Vault server discovery is enabled (vault server URL will be looked up via discovery).

spring.cloud.vault.discovery.service-id

vault

Service id to locate Vault.

spring.cloud.vault.enabled

true

Enable Vault config server.

spring.cloud.vault.fail-fast

false

Fail fast if data cannot be obtained from Vault.

spring.cloud.vault.gcp-gce.gcp-path

gcp

Mount path of the Kubernetes authentication backend.

spring.cloud.vault.gcp-gce.role

Name of the role against which the login is being attempted.

spring.cloud.vault.gcp-gce.service-account

Optional service account id. Using the default id if left unconfigured.

spring.cloud.vault.gcp-iam.credentials.encoded-key

The base64 encoded contents of an OAuth2 account private key in JSON format.

spring.cloud.vault.gcp-iam.credentials.location

Location of the OAuth2 credentials private key. <p> Since this is a Resource, the private key can be in a multitude of locations, such as a local file system, classpath, URL, etc.

spring.cloud.vault.gcp-iam.gcp-path

gcp

Mount path of the Kubernetes authentication backend.

spring.cloud.vault.gcp-iam.jwt-validity

15m

Validity of the JWT token.

spring.cloud.vault.gcp-iam.project-id

Overrides the GCP project Id.

spring.cloud.vault.gcp-iam.role

Name of the role against which the login is being attempted.

spring.cloud.vault.gcp-iam.service-account-id

Overrides the GCP service account Id.

spring.cloud.vault.generic.application-name

application

Application name to be used for the context.

spring.cloud.vault.generic.backend

secret

Name of the default backend.

spring.cloud.vault.generic.default-context

application

Name of the default context.

spring.cloud.vault.generic.enabled

true

Enable the generic backend.

spring.cloud.vault.generic.profile-separator

/

Profile-separator to combine application name and profile.

spring.cloud.vault.host

localhost

Vault server host.

spring.cloud.vault.kubernetes.kubernetes-path

kubernetes

Mount path of the Kubernetes authentication backend.

spring.cloud.vault.kubernetes.role

Name of the role against which the login is being attempted.

spring.cloud.vault.kubernetes.service-account-token-file

/var/run/secrets/kubernetes.io/serviceaccount/token

Path to the service account token file.

spring.cloud.vault.kv.application-name

application

Application name to be used for the context.

spring.cloud.vault.kv.backend

secret

Name of the default backend.

spring.cloud.vault.kv.backend-version

2

Key-Value backend version. Currently supported versions are: <ul> <li>Version 1 (unversioned key-value backend).</li> <li>Version 2 (versioned key-value backend).</li> </ul>

spring.cloud.vault.kv.default-context

application

Name of the default context.

spring.cloud.vault.kv.enabled

false

Enable the kev-value backend.

spring.cloud.vault.kv.profile-separator

/

Profile-separator to combine application name and profile.

spring.cloud.vault.namespace

Vault namespace (requires Vault Enterprise).

spring.cloud.vault.pcf.instance-certificate

Path to the instance certificate (PEM). Defaults to {@code CF_INSTANCE_CERT} env variable.

spring.cloud.vault.pcf.instance-key

Path to the instance key (PEM). Defaults to {@code CF_INSTANCE_KEY} env variable.

spring.cloud.vault.pcf.pcf-path

pcf

Mount path of the Kubernetes authentication backend.

spring.cloud.vault.pcf.role

Name of the role against which the login is being attempted.

spring.cloud.vault.port

8200

Vault server port.

spring.cloud.vault.read-timeout

15000

Read timeout.

spring.cloud.vault.scheme

https

Protocol scheme. Can be either "http" or "https".

spring.cloud.vault.ssl.cert-auth-path

cert

Mount path of the TLS cert authentication backend.

spring.cloud.vault.ssl.key-store

Trust store that holds certificates and private keys.

spring.cloud.vault.ssl.key-store-password

Password used to access the key store.

spring.cloud.vault.ssl.trust-store

Trust store that holds SSL certificates.

spring.cloud.vault.ssl.trust-store-password

Password used to access the trust store.

spring.cloud.vault.token

Static vault token. Required if {@link #authentication} is {@code TOKEN}.

spring.cloud.vault.uri

Vault URI. Can be set with scheme, host and port.

spring.cloud.zookeeper.base-sleep-time-ms

50

Initial amount of time to wait between retries.

spring.cloud.zookeeper.block-until-connected-unit

The unit of time related to blocking on connection to Zookeeper.

spring.cloud.zookeeper.block-until-connected-wait

10

Wait time to block on connection to Zookeeper.

spring.cloud.zookeeper.connect-string

localhost:2181

Connection string to the Zookeeper cluster.

spring.cloud.zookeeper.connection-timeout

The configured connection timeout in milliseconds.

spring.cloud.zookeeper.default-health-endpoint

Default health endpoint that will be checked to verify that a dependency is alive.

spring.cloud.zookeeper.dependencies

Mapping of alias to ZookeeperDependency. From Ribbon perspective the alias is actually serviceID since Ribbon can't accept nested structures in serviceID.

spring.cloud.zookeeper.dependency-configurations

spring.cloud.zookeeper.dependency-names

spring.cloud.zookeeper.discovery.enabled

true

spring.cloud.zookeeper.discovery.initial-status

The initial status of this instance (defaults to {@link StatusConstants#STATUS_UP}).

spring.cloud.zookeeper.discovery.instance-host

Predefined host with which a service can register itself in Zookeeper. Corresponds to the {code address} from the URI spec.

spring.cloud.zookeeper.discovery.instance-id

Id used to register with zookeeper. Defaults to a random UUID.

spring.cloud.zookeeper.discovery.instance-port

Port to register the service under (defaults to listening port).

spring.cloud.zookeeper.discovery.instance-ssl-port

Ssl port of the registered service.

spring.cloud.zookeeper.discovery.metadata

Gets the metadata name/value pairs associated with this instance. This information is sent to zookeeper and can be used by other instances.

spring.cloud.zookeeper.discovery.order

0

Order of the discovery client used by `CompositeDiscoveryClient` for sorting available clients.

spring.cloud.zookeeper.discovery.register

true

Register as a service in zookeeper.

spring.cloud.zookeeper.discovery.root

/services

Root Zookeeper folder in which all instances are registered.

spring.cloud.zookeeper.discovery.uri-spec

{scheme}://{address}:{port}

The URI specification to resolve during service registration in Zookeeper.

spring.cloud.zookeeper.enabled

true

Is Zookeeper enabled.

spring.cloud.zookeeper.max-retries

10

Max number of times to retry.

spring.cloud.zookeeper.max-sleep-ms

500

Max time in ms to sleep on each retry.

spring.cloud.zookeeper.prefix

Common prefix that will be applied to all Zookeeper dependencies' paths.

spring.cloud.zookeeper.session-timeout

The configured/negotiated session timeout in milliseconds. Please refer to <a href='https://cwiki.apache.org/confluence/display/CURATOR/TN14'>Curator's Tech Note 14</a> to understand how Curator implements connection sessions. @see <a href='https://cwiki.apache.org/confluence/display/CURATOR/TN14'>Curator's Tech Note 14</a>

spring.sleuth.annotation.enabled

true

spring.sleuth.async.configurer.enabled

true

Enable default AsyncConfigurer.

spring.sleuth.async.enabled

true

Enable instrumenting async related components so that the tracing information is passed between threads.

spring.sleuth.async.ignored-beans

List of {@link java.util.concurrent.Executor} bean names that should be ignored and not wrapped in a trace representation.

spring.sleuth.baggage-keys

List of baggage key names that should be propagated out of process. These keys will be prefixed with `baggage` before the actual key. This property is set in order to be backward compatible with previous Sleuth versions. @see brave.propagation.ExtraFieldPropagation.FactoryBuilder#addPrefixedFields(String, java.util.Collection)

spring.sleuth.baggage.correlation-enabled

true

Adds a {@link CorrelationScopeDecorator} to put baggage values into the correlation context.

spring.sleuth.baggage.correlation-fields

A list of {@link BaggageField#name() fields} to add to correlation (MDC) context. @see CorrelationScopeConfig.SingleCorrelationField#create(BaggageField)

spring.sleuth.baggage.local-fields

Same as {@link #remoteFields} except that this field is not propagated to remote services. @see BaggagePropagationConfig.SingleBaggageField#local(BaggageField)

spring.sleuth.baggage.remote-fields

List of fields that are referenced the same in-process as it is on the wire. For example, the field "x-vcap-request-id" would be set as-is including the prefix. @see BaggagePropagationConfig.SingleBaggageField#remote(BaggageField) @see BaggagePropagationConfig.SingleBaggageField.Builder#addKeyName(String)

spring.sleuth.baggage.tag-fields

A list of {@link BaggageField#name() fields} to tag into the span. @see Tags#BAGGAGE_FIELD

spring.sleuth.circuitbreaker.enabled

true

Enable Spring Cloud CircuitBreaker instrumentation.

spring.sleuth.enabled

true

spring.sleuth.feign.enabled

true

Enable span information propagation when using Feign.

spring.sleuth.feign.processor.enabled

true

Enable post processor that wraps Feign Context in its tracing representations.

spring.sleuth.grpc.enabled

true

Enable span information propagation when using GRPC.

spring.sleuth.http.enabled

true

spring.sleuth.http.legacy.enabled

false

Enables the legacy Sleuth setup.

spring.sleuth.hystrix.strategy.enabled

true

Enable custom HystrixConcurrencyStrategy that wraps all Callable instances into their Sleuth representative - the TraceCallable.

spring.sleuth.hystrix.strategy.passthrough

false

When enabled the tracing information is passed to the Hystrix execution threads but spans are not created for each execution.

spring.sleuth.integration.enabled

true

Enable Spring Integration sleuth instrumentation.

spring.sleuth.integration.patterns

[!hystrixStreamOutput*, , !channel]

An array of patterns against which channel names will be matched. @see org.springframework.integration.config.GlobalChannelInterceptor#patterns() Defaults to any channel name not matching the Hystrix Stream and functional Stream channel names.

spring.sleuth.integration.websockets.enabled

true

Enable tracing for WebSockets.

spring.sleuth.keys.http.headers

Additional headers that should be added as tags if they exist. If the header value is multi-valued, the tag value will be a comma-separated, single-quoted list.

spring.sleuth.keys.http.prefix

http.

Prefix for header names if they are added as tags.

spring.sleuth.local-keys

Same as {@link #propagationKeys} except that this field is not propagated to remote services. @see brave.propagation.ExtraFieldPropagation.FactoryBuilder#addRedactedField(String) @deprecated use {@code spring.sleuth.baggage.local-fields} property

spring.sleuth.log.slf4j.enabled

true

Enable a {@link Slf4jScopeDecorator} that prints tracing information in the logs.

spring.sleuth.log.slf4j.whitelisted-mdc-keys

A list of keys to be put from baggage to MDC. @deprecated use spring.sleuth.baggage.correlation-fields property

spring.sleuth.messaging.enabled

false

Should messaging be turned on.

spring.sleuth.messaging.jms.enabled

true

Enable tracing of JMS.

spring.sleuth.messaging.jms.remote-service-name

jms

spring.sleuth.messaging.kafka.enabled

true

Enable tracing of Kafka.

spring.sleuth.messaging.kafka.mapper.enabled

true

Enable DefaultKafkaHeaderMapper tracing for Kafka.

spring.sleuth.messaging.kafka.remote-service-name

kafka

spring.sleuth.messaging.rabbit.enabled

true

Enable tracing of RabbitMQ.

spring.sleuth.messaging.rabbit.remote-service-name

rabbitmq

spring.sleuth.opentracing.enabled

true

spring.sleuth.propagation-keys

List of fields that are referenced the same in-process as it is on the wire. For example, the name "x-vcap-request-id" would be set as-is including the prefix. <p> Note: {@code fieldName} will be implicitly lower-cased. @see brave.propagation.ExtraFieldPropagation.FactoryBuilder#addField(String) @deprecated use {@code spring.sleuth.baggage.remote-fields} property

spring.sleuth.propagation.tag.enabled

true

Enables a {@link TagPropagationFinishedSpanHandler} that adds extra propagated fields to span tags.

spring.sleuth.propagation.tag.whitelisted-keys

A list of keys to be put from extra propagation fields to span tags.

spring.sleuth.reactor.decorate-on-each

true

When true decorates on each operator, will be less performing, but logging will always contain the tracing entries in each operator. When false decorates on last operator, will be more performing, but logging might not always contain the tracing entries.

spring.sleuth.reactor.enabled

true

When true enables instrumentation for reactor.

spring.sleuth.redis.enabled

true

Enable span information propagation when using Redis.

spring.sleuth.redis.remote-service-name

redis

Service name for the remote Redis endpoint.

spring.sleuth.rpc.enabled

true

Enable tracing of RPC.

spring.sleuth.rxjava.schedulers.hook.enabled

true

Enable support for RxJava via RxJavaSchedulersHook.

spring.sleuth.rxjava.schedulers.ignoredthreads

[HystrixMetricPoller, ^RxComputation.*$]

Thread names for which spans will not be sampled.

spring.sleuth.sampler.probability

Probability of requests that should be sampled. E.g. 1.0 - 100% requests should be sampled. The precision is whole-numbers only (i.e. there's no support for 0.1% of the traces).

spring.sleuth.sampler.rate

10

A rate per second can be a nice choice for low-traffic endpoints as it allows you surge protection. For example, you may never expect the endpoint to get more than 50 requests per second. If there was a sudden surge of traffic, to 5000 requests per second, you would still end up with 50 traces per second. Conversely, if you had a percentage, like 10%, the same surge would end up with 500 traces per second, possibly overloading your storage. Amazon X-Ray includes a rate-limited sampler (named Reservoir) for this purpose. Brave has taken the same approach via the {@link brave.sampler.RateLimitingSampler}.

spring.sleuth.scheduled.enabled

true

Enable tracing for {@link org.springframework.scheduling.annotation.Scheduled}.

spring.sleuth.scheduled.skip-pattern

org.springframework.cloud.netflix.hystrix.stream.HystrixStreamTask

Pattern for the fully qualified name of a class that should be skipped.

spring.sleuth.supports-join

true

True means the tracing system supports sharing a span ID between a client and server.

spring.sleuth.trace-id128

false

When true, generate 128-bit trace IDs instead of 64-bit ones.

spring.sleuth.web.additional-skip-pattern

Additional pattern for URLs that should be skipped in tracing. This will be appended to the {@link SleuthWebProperties#skipPattern}.

spring.sleuth.web.client.enabled

true

Enable interceptor injecting into {@link org.springframework.web.client.RestTemplate}.

spring.sleuth.web.client.skip-pattern

Pattern for URLs that should be skipped in client side tracing.

spring.sleuth.web.enabled

true

When true enables instrumentation for web applications.

spring.sleuth.web.exception-logging-filter-enabled

true

Flag to toggle the presence of a filter that logs thrown exceptions.

spring.sleuth.web.exception-throwing-filter-enabled

true

Flag to toggle the presence of a filter that logs thrown exceptions. @deprecated use {@link #exceptionLoggingFilterEnabled}

spring.sleuth.web.filter-order

Order in which the tracing filters should be registered. Defaults to {@link TraceHttpAutoConfiguration#TRACING_FILTER_ORDER}.

spring.sleuth.web.ignore-auto-configured-skip-patterns

false

If set to true, auto-configured skip patterns will be ignored. @see TraceWebAutoConfiguration

spring.sleuth.web.skip-pattern

/api-docs.*\

/swagger.*\

spring.sleuth.zuul.enabled

true

Enable span information propagation when using Zuul.

spring.zipkin.activemq.message-max-bytes

100000

Maximum number of bytes for a given message with spans sent to Zipkin over ActiveMQ.

spring.zipkin.activemq.queue

zipkin

Name of the ActiveMQ queue where spans should be sent to Zipkin.

spring.zipkin.base-url

http://localhost:9411/

URL of the zipkin query server instance. You can also provide the service id of the Zipkin server if Zipkin's registered in service discovery (e.g. https://zipkinserver/).

spring.zipkin.compression.enabled

false

spring.zipkin.discovery-client-enabled

If set to {@code false}, will treat the {@link ZipkinProperties#baseUrl} as a URL always.

spring.zipkin.enabled

true

Enables sending spans to Zipkin.

spring.zipkin.encoder

Encoding type of spans sent to Zipkin. Set to {@link SpanBytesEncoder#JSON_V1} if your server is not recent.

spring.zipkin.kafka.topic

zipkin

Name of the Kafka topic where spans should be sent to Zipkin.

spring.zipkin.locator.discovery.enabled

false

Enabling of locating the host name via service discovery.

spring.zipkin.message-timeout

1

Timeout in seconds before pending spans will be sent in batches to Zipkin.

spring.zipkin.rabbitmq.addresses

Addresses of the RabbitMQ brokers used to send spans to Zipkin

spring.zipkin.rabbitmq.queue

zipkin

Name of the RabbitMQ queue where spans should be sent to Zipkin.

spring.zipkin.sender.type

Means of sending spans to Zipkin.

spring.zipkin.service.name

The name of the service, from which the Span was sent via HTTP, that should appear in Zipkin.

stubrunner.amqp.enabled

false

Whether to enable support for Stub Runner and AMQP.

stubrunner.amqp.mockCOnnection

true

Whether to enable support for Stub Runner and AMQP mocked connection factory.

stubrunner.classifier

stubs

The classifier to use by default in ivy co-ordinates for a stub.

stubrunner.cloud.consul.enabled

true

Whether to enable stubs registration in Consul.

stubrunner.cloud.delegate.enabled

true

Whether to enable DiscoveryClient's Stub Runner implementation.

stubrunner.cloud.enabled

true

Whether to enable Spring Cloud support for Stub Runner.

stubrunner.cloud.eureka.enabled

true

Whether to enable stubs registration in Eureka.

stubrunner.cloud.loadbalancer.enabled

true

Whether to enable Stub Runner's Spring Cloud Load Balancer integration.

stubrunner.cloud.stubbed.discovery.enabled

true

Whether Service Discovery should be stubbed for Stub Runner. If set to false, stubs will get registered in real service discovery.

stubrunner.cloud.zookeeper.enabled

true

Whether to enable stubs registration in Zookeeper.

stubrunner.consumer-name

You can override the default {@code spring.application.name} of this field by setting a value to this parameter.

stubrunner.delete-stubs-after-test

true

If set to {@code false} will NOT delete stubs from a temporary folder after running tests.

stubrunner.fail-on-no-stubs

true

When enabled, this flag will tell stub runner to throw an exception when no stubs / contracts were found.

stubrunner.generate-stubs

false

When enabled, this flag will tell stub runner to not load the generated stubs, but convert the found contracts at runtime to a stub format and run those stubs.

stubrunner.http-server-stub-configurer

Configuration for an HTTP server stub.

stubrunner.ids

[]

The ids of the stubs to run in "ivy" notation ([groupId]:artifactId:[version]:[classifier][:port]). {@code groupId}, {@code classifier}, {@code version} and {@code port} can be optional.

stubrunner.ids-to-service-ids

Mapping of Ivy notation based ids to serviceIds inside your application. Example "a:b" -> "myService" "artifactId" -> "myOtherService"

stubrunner.integration.enabled

true

Whether to enable Stub Runner integration with Spring Integration.

stubrunner.jms.enabled

true

Whether to enable Stub Runner integration with Spring JMS.

stubrunner.kafka.enabled

true

Whether to enable Stub Runner integration with Spring Kafka.

stubrunner.kafka.initializer.enabled

true

Whether to allow Stub Runner to take care of polling for messages instead of the KafkaStubMessages component. The latter should be used only on the producer side.

stubrunner.mappings-output-folder

Dumps the mappings of each HTTP server to the selected folder.

stubrunner.max-port

15000

Max value of a port for the automatically started WireMock server.

stubrunner.min-port

10000

Min value of a port for the automatically started WireMock server.

stubrunner.password

Repository password.

stubrunner.properties

Map of properties that can be passed to custom {@link org.springframework.cloud.contract.stubrunner.StubDownloaderBuilder}.

stubrunner.proxy-host

Repository proxy host.

stubrunner.proxy-port

Repository proxy port.

stubrunner.stream.enabled

true

Whether to enable Stub Runner integration with Spring Cloud Stream.

stubrunner.stubs-mode

Pick where the stubs should come from.

stubrunner.stubs-per-consumer

false

Should only stubs for this particular consumer get registered in HTTP server stub.

stubrunner.username

Repository username.

wiremock.placeholders.enabled

true

Flag to indicate that http URLs in generated wiremock stubs should be filtered to add or resolve a placeholder for a dynamic port.

wiremock.reset-mappings-after-each-test

false

wiremock.rest-template-ssl-enabled

false

wiremock.server.files

[]

wiremock.server.https-port

-1

wiremock.server.https-port-dynamic

false

wiremock.server.port

8080

wiremock.server.port-dynamic

false

wiremock.server.stubs

[]

zuul.ribbon-isolation-strategy

zuul.ribbon.eager-load.enabled

false

Enables eager loading of Ribbon clients on startup.