2.3.2.RELEASE
Table of Contents
I’m excited about Spring Data Neo4j for several reasons.
First, this project is in a very important space. We are in an era of transition. A very few years ago, a relational database was a given for storing nearly all the data in nearly all applications. While relational databases remain important, new application requirements and massive data proliferation have prompted a richer choice of data stores. Graph databases have some very interesting strengths, and Neo4j is proving itself valuable in many applications. It's a choice you should add to your toolbox.
Second, Spring Data Neo4j is an innovative project, which makes it easy to work with one of the most interesting new data stores. Unfortunately, the proliferation of new data stores has not been matched by innovation in programming models to work with them. Ironically, just after modern ORM mapping made working with relational data in Java relatively easy, the data store disruption occurred, and developers were back to square one: struggling once more with clumsy, low level APIs. Working with most non-relational technologies is overly complex and imposes too much work on developers. Spring Data Neo4j makes working with Neo4j amazingly easy, and therefore has the potential to make you more successful as a developer. Its use of AspectJ to eliminate persistence code from your domain model is truly innovative, and on the cutting edge of today’s Java technologies.
Third, I'm excited about Spring Data Neo4j for personal reasons. I no longer get to write code as often as I would like. My initial convictions that Spring and AspectJ could both make building applications with Neo4j dramatically easier and cross-store object navigation possible gave me an excuse for a much-needed coding binge early in 2010. This led to a prototype of what became Spring Data Neo4j — at times written paired with Emil. I’m sure the vast majority of my code has long since been replaced (probably for the better) by coders who aren't rusty — thanks Michael and Thomas! — but I retain my pleasant memories.
Finally, Spring Data Neo4j is part of the broader Spring Data project: one of the key areas in which Spring is innovating to help meet new application requirements. I encourage you to explore Spring Data, and — better still — become involved in the community and contribute.
Enjoy the Spring Data Neo4j book, and happy coding!
Rod Johnson, Founder, Spring and SVP, Application Platform, VMware
"Spring is the most popular middleware on the planet," I thought to myself as I walked up to Rod Johnson in late 2009 at the JAOO conference in Aarhus, Denmark. Rod had just given an introductory presentation about Spring Roo and when he was done I told him "Great talk. You're clearly building a stack for the future. What about support for non-relational databases?"
We started talking and quickly agreed that NOSQL will play an important role in emerging stacks. Now, a year and half later, Spring Data Neo4j is available in its first stable release and I'm blown away by the result. Never before in any environment, in any programming framework, in any stack, has it been so easy and intuitive to tap into the power of a graph database like Neo4j. It's a testament to the efforts by an awesome team of four hackers from Neo Technology and VMware: Michael Hunger, David Montag, Thomas Risberg and Mark Pollack.
The Spring framework revolutionized how we all wrote enterprise Java applications and today it's used by millions of enterprise developers. Graph databases also stand out in the NOSQL crowd when it comes to enterprise adoption. You can find graph databases used in areas as diverse as network management, fraud detection, cloud management, anything with social data, geo and location services, master data management, bioinformatics, configuration databases, and much more.
Spring developers deserve access to the best tools available to solve their problem. Sometimes that's a relational database accessed through JPA. But more often than not, a graph database like Neo4j is the perfect fit for your project. I hope that Spring Data Neo4j will give you access to the power and flexibility of graph databases while retaining the familiar productivity and convenience of the Spring framework.
Enjoy the Spring Data Neo4j guide book and welcome to the wonderful world of graph databases!
Emil Eifrem, CEO of Neo Technology
Welcome to the Spring Data Neo4j Guide Book. Thank you for taking the time to get an in-depth look into Spring Data Neo4j. This project is part of the Spring Data project, which brings the convenient programming model of the Spring Framework to modern NOSQL databases. Spring Data Neo4j, as the name alludes to, aims to provide support for the graph database Neo4j.
It was written by developers for developers. Hopefully we've created a guide that is well received by our peers.
If you have any feedback on Spring Data Neo4j or this book, please provide it via the SpringSource JIRA, the SpringSource NOSQL Forum, github comments or issues, or the Neo4j mailing list.
This book is presented as a duplex book, a term coined by Martin Fowler. A duplex book consists of at least two parts. The first part is an easily accessible tutorial or narrative that gives the reader an overview of the topics contained in the book. It contains lots of examples and discussion topics. This part of the book is highly suited for cover-to-cover reading.
We chose a tutorial describing the creation of a web application that allows movie enthusiasts to find their favorite movies, rate them, connect with fellow movie geeks, and enjoy social features such as recommendations. The application is running on Neo4j using Spring Data Neo4j and the well-known Spring Web Stack.
The second part of the book is the classic reference documentation, containing detailed information about the library. It discusses the programming model, the underlying assumptions, and internals, as well as the APIs for the object-graph mapping. The reference documentation is typically used to look up concrete bits of information, or to drill down into certain topics. For hackers wanting to really delve into Spring Data Neo4j, it can of course also be read cover-to-cover.
We would like to thank everyone who contributed to this book, especially Mark Pollack and Thomas Risberg, the leads of the Spring Data Project, who helped a lot during the development of the library as well as sharing great feedback about the book. Also Oliver Gierke, our local German VMWare/SpringSource engineer, who invested a lot of time discussing various aspects of the library as well as providing the superb foundations for the Spring Data Repositories. We tortured Andy Clement, the AspectJ project lead, with many questions and issues around our advanced AspectJ usage which caused some headaches. He always quickly solved our issues and gave us excellent answers.
Many thanks to our colleagues David Montag, Andreas Kollegger and Rickard Öberg who not only contributed to Spring Data Neo4j but also provided content and feedback for this book.
We also appreciate very much the foresight of Rod Johnson and Emil Eifrem to initiate the project, and now also providing great forewords. Their leadership inspired collaboration between the engineering teams at SpringSource and Neo Technology, a tremendous help during the making of Spring Data Neo4j.
Last but not least we thank our vibrant community, both in the Spring Forums as well as on the Neo4j Mailing list and on many other places on the internet for giving us feedback, reporting issues and suggesting improvements. Without that important feedback we wouldn't be where we are today. Especially Jean-Pierre Bergamin and Alfredas Chmieliauskas provided exceptional feedback and contributions.
Enjoy the book!
The first part of the book provides a tutorial that walks through the creation of a complete web application called cineasts.net, built with Spring Data Neo4j. Cineasts are people who love movies, and the site is a gathering place for moviegoers. For cineasts.net we decided to add a social aspect to the rating of movies, allowing friends to share their scores and get recommendations for new friends and movies.
The tutorial takes the reader through the steps necessary to create the application. It provides the configuration and code examples that are needed to understand what's happening in Spring Data Neo4j. The complete source code for the app is available on Github.
Once upon a time we wanted to build a social movie database. At first there was only the name: Cineasts, the movie enthusiasts who have a burning passion for movies. So we went ahead and bought the domain cineasts.net, and so we were off to a good start.
We had some ideas about the domain model too. There would obviously be actors playing roles in movies. We also needed someone to rate the movies - enter the cineast. And cineasts, being the social people they are, they wanted to make friends with other fellow cineasts. Imagine instantly finding someone to watch a movie with, or share movie preferences with. Even better, finding new friends and movies based on what you and your friends like.
When we looked for possible sources of data, IMDB was our first stop. But they're a bit expensive for our taste, charging $15k USD for data access. Fortunately, we found themoviedb.org which provides user-generated data for free. They also have liberal terms and conditions, and a nice API for retrieving the data.
We had many more ideas, but we wanted to get something out there quickly. Here is how we envisioned the final website:
Being Spring developers, we naturally choose components from the Spring stack to do all the heavy lifting. After all, we have the concept etched out, so we're already halfway there.
What database would fit both the complex network of cineasts, movies, actors, roles, ratings, and friends, while also being able to support the recommendation algorithms that we had in mind? We had no idea.
But hold your horses, there is this new Spring Data project, started in 2010, which brings the convenience of the Spring programming model to NOSQL databases. That should be in line with what we already know, providing us with a quick start. We had a look at the list of projects supporting the different NOSQL databases out there. Only one of them mentioned the kind of social network we were thinking of - Spring Data Neo4j for the Neo4j graph database. Neo4j's slogan of "value in relationships" plus "Enterprise NOSQL" and the accompanying docs looked like what we needed. We decided to give it a try.
To set up the project we created a public Github account and began setting up the
infrastructure for a Spring web project using Maven as the build system. So we added
the dependencies for the Spring Framework libraries, added the web.xml
for the DispatcherServlet
,
and the applicationContext.xml
in the webapp directory.
Example 2.1. Project pom.xml
<properties> <spring.version>3.0.7.RELEASE</spring.version> </properties> <dependencies> <dependency> <groupId>org.springframework</groupId> <!-- abbreviated for all the dependencies --> <artifactId>spring-(core,context,aop,aspects,tx,webmvc)</artifactId> <version>${spring.version}</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-test</artifactId> <version>${spring.version}</version> <scope>test</scope> </dependency> </dependencies>
Example 2.2. Project web.xml
<listener> <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class> </listener> <servlet> <servlet-name>dispatcherServlet</servlet-name> <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>dispatcherServlet</servlet-name> <url-pattern>/</url-pattern> </servlet-mapping>
With this setup in place we were ready for the first spike: creating a simple MovieController showing a static view. See the Spring Framework documentation for information on doing this.
Example 2.3. applicationContext.xml
<?xml version="1.0" encoding="UTF-8" standalone="no"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:context="http://www.springframework.org/schema/context" xmlns:tx="http://www.springframework.org/schema/tx" xsi:schemaLocation=" http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.0.xsd http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-3.0.xsd http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-3.0.xsd"> <context:annotation-config/> <context:spring-configured/> <context:component-scan base-package="org.neo4j.cineasts"> <context:exclude-filter type="annotation" expression="org.springframework.stereotype.Controller"/> </context:component-scan> <tx:annotation-driven mode="proxy"/> </beans>
Example 2.4. dispatcherServlet-servlet.xml
<mvc:annotation-driven/> <mvc:resources mapping="/images/**" location="/images/"/> <mvc:resources mapping="/resources/**" location="/resources/"/> <context:component-scan base-package="org.neo4j.cineasts.controller"/> <bean id="viewResolver" class="org.springframework.web.servlet.view.InternalResourceViewResolver" p:prefix="/WEB-INF/views/" p:suffix=".jsp"/>
We spun up Tomcat in STS with the App and it worked fine. For completeness we also added Jetty to the maven-config
and tested it by invoking mvn jetty:run
to see if there were any obvious
issues with the config. It all seemed to work just fine.
We wanted to outline the domain model before diving into library details. We also looked at the data model of the themoviedb.org data to confirm that it matched our expectations.
In Java code this looks pretty straightforward:
Example 3.1. Domain model
class Movie {
String id;
String title;
int year;
Set<Role> cast;
}
class Actor {
String id;
String name;
Set<Movie> filmography;
Role playedIn(Movie movie, String role) { ... }
}
class Role {
Movie movie;
Actor actor;
String role;
}
class User {
String login;
String name;
String password;
Set<Rating> ratings;
Set<User> friends;
Rating rate(Movie movie, int stars, String comment) { ... }
void befriend(User user) { ... }
}
class Rating {
User user;
Movie movie;
int stars;
String comment;
}
Then we wrote some simple tests to show that the basic design of the domain is good enough so far. Just creating a movie, populating it with actors, and allowing users to rate it.
Now we needed to figure out how to store our chosen domain model in the chosen database. First we read up about graph databases, in particular our chosen one, Neo4j. The Neo4j data model consists of nodes and relationships, both of which can have key/value-style properties. What does that mean, exactly? Nodes are the graph database name for records, with property keys instead of column names. That's normal enough. Relationships are the special part. In Neo4j, relationships are first-class citizens, meaning they are more than a simple foreign-key reference to another record, relationships carry information. So we can link together nodes into semantically rich networks. This really appealed to us. Then we found that we were also able to index nodes and relationships by {key, value} pairs. We also found that we could traverse relationships both imperatively using the core API, and declaratively using a query-like Traversal Description. Besides those programmatic traversals there was the powerful graph query language called Cypher and an interesting looking DSL named Gremlin. So lots of ways of working with the graph.
We also learned that Neo4j is fully transactional and therefore upholds ACID guarantees for our data. Durability is actually a good thing and we didn't have to scale to trillions of users and movies yet. This is unusual for NOSQL databases, but easier for us to get our head around than non-transactional eventual consistency. It also made us feel safe, though it also meant that we had to manage transactions. Something to keep in mind later.
We started out by doing some prototyping with the Neo4j core API to get a feeling for how it works. And also, to see what the domain might look like when it's saved in the graph database. After adding the Maven dependency for Neo4j, we were ready to go.
Example 4.1. Neo4j Maven dependency
<dependency> <groupId>org.neo4j</groupId> <artifactId>neo4j</artifactId> <version>1.8.1</version> </dependency>
Example 4.2. Neo4j core API (transaction code omitted)
enum RelationshipTypes implements RelationshipType { ACTS_IN }; GraphDatabaseService gds = new EmbeddedGraphDatabase("/path/to/store"); Node forrest=gds.createNode(); forrest.setProperty("title","Forrest Gump"); forrest.setProperty("year",1994); gds.index().forNodes("movies").add(forrest,"id",1); Node tom=gds.createNode(); tom.setProperty("name","Tom Hanks"); Relationship role=tom.createRelationshipTo(forrest,ACTS_IN); role.setProperty("role","Forrest"); Node movie=gds.index().forNodes("movies").get("id",1).getSingle(); assertEquals("Forrest Gump", movie.getProperty("title")); for (Relationship role : movie.getRelationships(ACTS_IN,INCOMING)) { Node actor=role.getOtherNode(movie); assertEquals("Tom Hanks", actor.getProperty("name")); assertEquals("Forrest", role.getProperty("role")); }
So far it had all been pure Spring Framework and Neo4j. However, using the Neo4j code in our domain classes polluted them with graph database details. For this application, we wanted to keep the domain classes clean. Spring Data Neo4j promised to do the heavy lifting for us, so we continued investigating it.
Spring Data Neo4j comes with two mapping modes. The more powerful one depends heavily on AspectJ, see Chapter 26, AspectJ details, so we ignored it for the time being. The simple direct POJO-mapping copies the data out of the graph and into our entities. Good enough for a web-application like ours.
The first step was to configure Maven:
Example 5.1. Spring Data Neo4j Maven configuration
<dependency> <groupId>org.springframework.data</groupId> <artifactId>spring-data-neo4j</artifactId> <version>2.1.0.RELEASE</version> </dependency>
The Spring context configuration was even easier, thanks to a provided namespace:
Example 5.2. Spring Data Neo4j context configuration
<beans xmlns="http://www.springframework.org/schema/beans" ... xmlns:neo4j="http://www.springframework.org/schema/data/neo4j" xsi:schemaLocation="... http://www.springframework.org/schema/data/neo4j http://www.springframework.org/schema/data/neo4j/spring-neo4j.xsd"> ... <neo4j:config storeDirectory="data/graph.db"/> ... </beans>
Looking at the Spring Data Neo4j documentation, we found a simple
Hello World example
and tried to understand it. We also spotted a compact reference card
which helped us a lot.
The entity classes were annotated with @NodeEntity
.
That was simple, so we added the annotation to our domain classes too. Entity classes representing
relationships were instead annotated with @RelationshipEntity
.
Property fields were taken care of automatically. The only additional field we had to provide for all
entities was an id-field to store the node- and relationship-ids.
Example 6.1. Movie class with annotation
@NodeEntity class Movie { @GraphId Long nodeId; String id; String title; int year; Set<Role> cast; }
It was time to put our entities to the test. How could we now be assured that an attribute really was persisted to
the graph store? We wanted to load the entity and check the attribute.
Either we could have a Neo4jTemplate
injected and use its findOne(id,type)
method to load the entity. Or use a more versatile Repository
. The same goes for persisting entities,
both Neo4jTemplate
or the Repository
could be used.
We decided to keep things simple for now.
So here's what our test ended up looking like:
Example 6.2. First test case
@Autowired Neo4jTemplate template; @Test @Transactional public void persistedMovieShouldBeRetrievableFromGraphDb() { Movie forrestGump = template.save(new Movie("Forrest Gump", 1994)); Movie retrievedMovie = template.findOne(forrestGump.getNodeId(), Movie.class); assertEquals("retrieved movie matches persisted one", forrestGump, retrievedMovie); assertEquals("retrieved movie title matches", "Forrest Gump", retrievedMovie.getTitle()); }
As Neo4j is transactional, we have to provide the transactional boundaries for mutating operations.
There is an @Indexed annotation for fields. We wanted to try this out, and use it to guide the
next test. We added @Indexed to the id
field of the Movie class. This field is intended to represent
the external ID that will be used in URIs and will be stable across database imports and updates.
That's why we also declare it as unique.
This time we went with a simple GraphRepository to retrieve the indexed movie.
Example 7.1. Exact Indexing for Movie id
@NodeEntity class Movie { @Indexed(unique=true) String id; String title; int year; } @Autowired Neo4jTemplate template; @Test @Transactional public void persistedMovieShouldBeRetrievableFromGraphDb() { int id = 1; Movie forrestGump = template.save(new Movie(id, "Forrest Gump", 1994)); GraphRepository<Movie> movieRepository = template.repositoryFor(Movie.class); Movie retrievedMovie = movieRepository.findByPropertyValue("id", id); assertEqual("retrieved movie matches persisted one", forrestGump, retrievedMovie); assertEqual("retrieved movie title matches", "Forrest Gump", retrievedMovie.getTitle()); }
We wanted to add repositories with domain-specific operations. Interestingly there was support for a very advanced repository infrastructure. You just declare an entity specific repository interface and get all commonly used methods for free without implementing any of boilerplate code.
So we started by creating a movie-related repository, simply by creating an empty interface.
Example 8.1. Movie repository
package org.neo4j.cineasts.repository; public interface MovieRepository extends GraphRepository<Movie> {}
Then we enabled repository support in the Spring context configuration by simply adding:
Example 8.2. Repository context configuration
<neo4j:repositories base-package="org.neo4j.cineasts.repository"/>
Besides the existing repository operations (like CRUD, and many standard queries) it was possible to declare
custom methods, which we explored later.
Those methods' names could be more domain centric and expressive than the generic operations.
For simple use-cases like finding by id's this is good enough. So we first let Spring autowire our
MovieController
with the MovieRepository
. That way we could perform simple persistence operations.
Example 8.3. Usage of a repository
@Autowired MovieRepository repo; ... Movie movie = repo.findByPropertyValue("id",movieId);
We went on exploring the repository infrastructure. A very cool feature was something that we so far only heard about from Grails developers. Deriving queries from method names. Impressive! So we had a more explicit method for the id lookup.
Example 8.4. Derived movie-repository query method
public interface MovieRepository extends GraphRepository<Movie> { Movie getMovieById(String id); }
In our wildest dreams we imagined the method names we would come up with, and what kinds of queries those could generate. But some, more complex queries would be cumbersome to read and write. So in those cases it is better to just annotate the finder method. We did this much later, and just wanted to give you a peek into the future. There is much more, you can do with repositories, it is worthwhile to explore.
Example 8.5. Annotated movie-repository query method
public interface MovieRepository extends GraphRepository<Movie> { @Query("start user=node:User({0}) match user-[r:RATED]->movie return movie order by r.stars desc limit 10") Iterable<Movie> getTopRatedMovies(User uer); }
Our application was not very much fun yet, just storing movies and actors. After all, the power is in the relationships between them. Fortunately, Neo4j treats relationships as first class citizens, allowing them to be addressed individually and have properties assigned to them. That allows for representing them as entities if needed.
Relationships without properties ("anonymous" relationships) don't require any @RelationshipEntity
classes. "Unfortunately" we had none of those, because our relationships were richer.
Therefore we went with the Role
relationship between Movie
and Actor
.
It had to be annotated with @RelationshipEntity
and the @StartNode
and @EndNode
had to be marked.
So our Role looked like this:
Example 9.1. Role class
@RelationshipEntity class Role { @StartNode Actor actor; @EndNode Movie movie; String role; }
When writing a test for the Role
we tried to create the relationship entity just by
instantiating it with new
and saving it with the template,
but we got an exception saying that it misses the relationship-type.
We had to add it to the @RelationshipEntity
as an attribute (or as a @RelationshipType annotated
field in the RelationshipEntity). Another way to create
instances of relationship-entities is to use the methods provided by the template, like
createRelationshipBetween
.
Example 9.2. Relating actors to movies
@RelationshipEntity(type="ACTS_IN") class Role { @StartNode Actor actor; @EndNode Movie movie; String role; } class Actor { ... public Role playedIn(Movie movie, String roleName) { Role role = new Role(this, movie, roleName); this.roles.add(role); return role; } } Role role = tomHanks.playedIn(forrestGump, "Forrest Gump"); // either save the actor template.save(tomHanks); // or the role template.save(role); // alternative approach Role role = template.createRelationshipBetween(actor,movie, Role.class, "ACTS_IN");
Saving just the actor would take care of relationships with the same type between two entities and remove the duplicates. Whereas just saving the role happily creates another relationship with the same type.
Now we wanted to find connected entities. We already had fields for the relationships in both classes. It was time to annotate them correctly. The Neo4j relationship type and direction were easy to figure out. The direction even defaulted to outgoing, so we only had to specify it for the movie. If we want to use the same relationship between the two entities we have to make sure to provide a dedicated type, otherwise the field-names would be used resulting in different relationships.
Example 9.3. @RelatedTo usage
@NodeEntity class Movie { @Indexed(unique=true) String id; String title; int year; @RelatedTo(type = "ACTS_IN", direction = Direction.INCOMING) Set<Actor> cast; } @NodeEntity class Actor { @Indexed(unique=true) int id; String name; @RelatedTo(type = "ACTS_IN") Set<Movie> movies; public Role playedIn(Movie movie, String roleName) { return new Role(this,movie, roleName); } }
Changes to the collections of related entities are reflected into the graph on saving of the entity.
We made sure to add some tests for using the relationshhips, so we were assured that the collections worked as advertised.
But we still couldn't access the Role relationship entities themselves. It turned out that there was a separate
annotation @RelatedToVia
for accessing the actual relationship entities. And we could
declare the field as an Iterable<Role>
, with read-only semantics or on a
Collection
or Set<Role>
field with modifying semantics.
So off we went, creating our first real relationship (just kidding).
To have the collections of relationships being read eagerly during the loading of the Movie we have to annotate it with the @Fetch annotation. Otherwise Spring Data Neo4j refrains from following relationships automatically. The risk of loading the whole graph into memory would be too high.
Example 9.4. @RelatedToVia usage
@NodeEntity class Movie { @Indexed(unique=true) String id; String title; int year; @Fetch @RelatedToVia(type = "ACTS_IN", direction = Direction.INCOMING) Iterable<Roles> roles; }
After watching the tests pass, we were confident that the changes to the relationship fields were really stored to the underlying relationships in the graph. We were pretty satisfied with persisting our domain.
Now we had a pretty complete application. It was time to put it to the test.
Before we opened the gates we needed to add some movie data. So we wrote a small class for
populating the database which could be called from our controller. A simple /populate
endpoint
for the controller that called it would be enough for now.
Example 10.1. Populating the database - Controller
@Service public class DatabasePopulator { @Transactional public List<Movie> populateDatabase() { Actor tomHanks = new Actor("1", "Tom Hanks"); Movie forrestGump = new Movie("1", "Forrest Gump"); tomHanks.playedIn(forrestGump,"Forrest"); template.save(forrestGump); return asList(forrestGump); } } @Controller public class MovieController { @Autowired private DatabasePopulator populator; @RequestMapping(value = "/populate", method = RequestMethod.POST) public String populateDatabase(Model model) { Collection<Movie> movies = populator.populateDatabase(); model.addAttribute("movies",movies); return "/movies/list"; } }
Accessing the URI we could see the list of movies we had added.
Being the geeks we are, we also wanted to inspect the raw data in the database. Reading the Neo4j docs, there were a couple of different ways of going about this.
First we tried Neoclipse, an Eclipse RCP application that opens an existing graph store and visualizes its content. After getting an exception about concurrent access, we learned that we have to use Neoclipse in read-only mode when our webapp was still running. Good to know.
For console junkies there was also a shell that was able to connect to a running Neo4j instance
(if it was started with the enable_remote_shell=true
parameter), or reads an existing
graph store directly.
Example 10.2. Starting the Neo4j Shell
bash# neo4j-shell -readonly -path data/graph.db bash# neo4j-shell -readonly -port 1337
The shell was very similar to a standard Bash shell. We were able to cd
to
between the nodes, and ls
the relationships and properties. There were also
more advanced commands for indexing, queries and traversals.
Example 10.3. Neo4j Shell usage
neo4j-sh[readonly] (0)$ help Available commands: index dbinfo ls rm alias set eval mv gsh env rmrel mkrel trav help pwd paths ... man cd Use man <command> for info about each command. neo4j-sh[readonly] (0)$ index --cd -g User login micha neo4j-sh[readonly] (Micha,1)$ ls *__type__ =[org.neo4j.cineasts.domain.User] *login =[micha] *name =[Micha] *roles =[ROLE_ADMIN,ROLE_USER] (me) --[FRIEND]-> (Olliver,2) (me) --[RATED]-> (The Matrix,3) neo4j-sh[readonly] (Micha,1)$ ls 2 *__type__ =[org.neo4j.cineasts.domain.User] *login =[ollie] *name =[Olliver] *roles =[ROLE_USER] (Olliver,2) <-[FRIEND]-- (me) neo4j-sh[readonly] (Micha,1)$ cd 3 neo4j-sh[readonly] (The Matrix,3)$ ls *__type__ =[org.neo4j.cineasts.domain.Movie] *description =[Neo is a young software engineer and part-time hacker who is singled ...] *genre =[Action] *homepage =[http://whatisthematrix.warnerbros.com/] ... *studio =[Warner Bros. Pictures] *tagline =[Welcome to the Real World.] *title =[The Matrix] *trailer =[http://www.youtube.com/watch?v=UM5yepZ21pI] *version =[324] (me) <-[ACTS_IN]-- (Marc Aden,19) (me) <-[ACTS_IN]-- (David Aston,18) ... (me) <-[ACTS_IN]-- (Keanu Reeves,6) (me) <-[DIRECTED]-- (Andy Wachowski,5) (me) <-[DIRECTED]-- (Lana Wachowski,4) (me) <-[RATED]-- (Micha,1)
After having put some data in the graph database, we also wanted to show it to the user. Adding
the controller method to show a single movie with its attributes and cast in a JSP was
straightforward. It basically just involved using the repository to look the movie up and add
it to the model, and then forwarding to the /movies/show
view and voilá.
Example 11.1. Controller for showing movies
@RequestMapping(value = "/movies/{movieId}", method = RequestMethod.GET, headers = "Accept=text/html") public String singleMovieView(final Model model, @PathVariable String movieId) { Movie movie = repository.findById(movieId); model.addAttribute("id", movieId); if (movie != null) { model.addAttribute("movie", movie); model.addAttribute("stars", movie.getStars()); } return "/movies/show"; }
Example 11.2. Populating the database - JSP /movies/show
<%@ page session="false" %> <%@ taglib uri="http://www.springframework.org/tags" prefix="s" %> <%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %> <c:choose> <c:when test="${not empty movie}"> <h2>${movie.title} (${stars} Stars)</h2> <c:if test="${not empty movie.roles}"> <ul> <c:forEach items="${movie.roles}" var="role"> <li> <a href="/actors/${role.actor.id}"><c:out value="${role.actor.name}" /> as <c:out value="${role.name}" /></a><br/> </li> </c:forEach> </ul> </c:if> </c:when> <c:otherwise> No Movie with id ${id} found! </c:otherwise> </c:choose>
The UI had now evolved to this:
The next thing was to allow users to search for movies, so we needed some fulltext search capabilities. As the default index provider implementation of Neo4j is based on Apache Lucene, we were delighted to see that fulltext indexes were supported out of the box.
We happily annotated the title field of the Movie class with @Indexed(type = FULLTEXT)
.
Next thing we got an exception telling us that we had to specify a separate index name.
So we simply changed it to @Indexed(type = FULLTEXT, indexName = "search")
.
With derived finder methods, finding things became easy. By simply declaring a finder-method name that expressed
the required properties, it worked without annotations.
Cool stuff and you could even tell it that it should return pages of movies, its size and offset specified by a
Pageable
which also contains sort information. Using the like
operator indicates
that fulltext search should be used, instead of an exact search.
Example 11.3. Searching for movies
public interface MovieRepository ... { Movie findById(String id); Page<Movie> findByTitleLike(String title, Pageable page); }
We then used this result in the controller to render a page of movies, driven by a search box. The movie properties and the cast were accessible through the getters in the domain classes.
Example 11.4. Search controller
@RequestMapping(value = "/movies", method = RequestMethod.GET, headers = "Accept=text/html") public String findMovies(Model model, @RequestParam("q") String query) { Page<Movie> movies = repository.findByTitleLike(query, new PageRequest(0,20)); model.addAttribute("movies", movies); model.addAttribute("query", query); return "/movies/list"; }
Example 11.5. Search Results JSP
<h2>Movies</h2> <c:choose> <c:when test="${not empty movies}"> <dl class="listings"> <c:forEach items="${movies}" var="movie"> <dt> <a href="/movies/${movie.id}"><c:out value="${movie.title}" /></a><br/> </dt> <dd> <c:out value="${movie.description}" escapeXml="true" /> </dd> </c:forEach> </dl> </c:when> <c:otherwise> No movies found for query "${query}". </c:otherwise> </c:choose>
The UI now looked like this:
So far, the website had only been a plain old movie database. We now wanted to add a touch of social to it.
So we started out by taking the User class that we'd already coded and made it a full-fledged Spring Data Neo4j entity. We added the ability to create friends and to rate movies. With that we also added a simple UserRepository that was able to look up users by ID.
The relationships of the user are his friends and the movie-ratings which is implemented
with a Rating
Relationship-Entity. This time we used a different approach
(for educational and curiosity purposes) to create the Rating
relationships.
The createRelationshipBetween
operation of the Neo4jTemplate was our matchmaker of
choice.
Example 12.1. Social entities
@NodeEntity class User { @Indexed(unique=true) String login; String name; String password; @RelatedToVia(type = RATED) @Fetch Set<Rating> ratings; @RelatedTo(type = "FRIEND", direction=Direction.BOTH) @Fetch Set<User> friends; public Rating rate(Neo4jOperations template, Movie movie, int stars, String comment) { final Rating rating = template.createRelationshipBetween(this, movie, Rating.class, RATED, false); rating.rate(stars, comment); return template.save(rating); } public void addFriend(User user) { this.friends.add(user); } } @RelationshipEntity class Rating { @StartNode User user; @EndNode Movie movie; int stars; String comment; public Rating rate(int stars, String comment) { this.stars = stars; this.comment = comment; return this; } }
We extended the DatabasePopulator to add some users and ratings to the initial setup.
Example 12.2. Populate users and ratings
@Transactional public List<Movie> populateDatabase() { Actor tomHanks = new Actor("1", "Tom Hanks"); Movie forestGump = new Movie("1", "Forrest Gump"); tomHanks.playedIn(forestGump, "Forrest"); template.save(tomHanks); User me = template.save(new User("micha", "Micha", "password")); Rating awesome = me.rate(template, forestGump, 5, "Awesome"); User ollie = template.save(new User("ollie", "Oliver", "password")); ollie.rate(template,forestGump, 2, "ok"); me.addFriend(ollie); template.save(me); return asList(forestGump); }
We also put a ratings field into the Movie class to be able to get a movie's ratings, and also a method to average its star rating.
Example 12.3. Getting the rating of a movie
class Movie { ... @RelatedToVia(type="RATED", direction = Direction.INCOMING) @Fetch Iterable<Rating> ratings; public int getStars() { int stars = 0, count = 0; for (Rating rating : ratings) { stars += rating.getStars(); count++; } return count == 0 ? 0 : stars / count; } }
Fortunately our tests highlighted the division by zero error when calculating the stars for a movie without ratings. The next steps were to add this information to the movie presentation in the UI, and creating a user profile page. But for that to happen, users must first be able to log in.
To handle an active user in the webapp we had to put it in the session and add login and registration pages. Of course the pages that were only meant for logged-in users had to be secured as well.
Being Spring users, we naturally used Spring Security for this. We wrote a simple UserDetailsService
by extending a repository with a custom implementation that takes care of looking up the users and validating their credentials.
The config is located in a separate applicationContext-security.xml
. But first, as always, Maven and web.xml
setup.
Example 13.1. Spring Security pom.xml
<dependency> <groupId>org.springframework.security</groupId> <artifactId>spring-security-web</artifactId> <version>${spring.version}</version> </dependency> <dependency> <groupId>org.springframework.security</groupId> <artifactId>spring-security-config</artifactId> <version>${spring.version}</version> </dependency>
Example 13.2. Spring Security web.xml
<context-param> <param-name>contextConfigLocation</param-name> <param-value> /WEB-INF/applicationContext-security.xml /WEB-INF/applicationContext.xml </param-value> </context-param> <listener> <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class> </listener> <filter> <filter-name>springSecurityFilterChain</filter-name> <filter-class>org.springframework.web.filter.DelegatingFilterProxy</filter-class> </filter> <filter-mapping> <filter-name>springSecurityFilterChain</filter-name> <url-pattern>/*</url-pattern> </filter-mapping>
Example 13.3. Spring Security applicationContext-security.xml
<security:global-method-security secured-annotations="enabled"> </security:global-method-security> <security:http auto-config="true" access-denied-page="/auth/denied"> <security:intercept-url pattern="/admin/*" access="ROLE_ADMIN"/> <security:intercept-url pattern="/import/*" access="ROLE_ADMIN"/> <security:intercept-url pattern="/user/*" access="ROLE_USER"/> <security:intercept-url pattern="/auth/login" access="IS_AUTHENTICATED_ANONYMOUSLY"/> <security:intercept-url pattern="/auth/register" access="IS_AUTHENTICATED_ANONYMOUSLY"/> <security:intercept-url pattern="/**" access="IS_AUTHENTICATED_ANONYMOUSLY"/> <security:form-login login-page="/auth/login" authentication-failure-url="/auth/login?login_error=true" default-target-url="/user"/> <security:logout logout-url="/auth/logout" logout-success-url="/" invalidate-session="true"/> </security:http> <security:authentication-manager> <security:authentication-provider user-service-ref="userRepository"> <security:password-encoder hash="md5"> <security:salt-source system-wide="cewuiqwzie"/> </security:password-encoder> </security:authentication-provider> </security:authentication-manager>
Example 13.4. CinceastUserDetailsService interface and UserRepository custom implementation
public interface CineastsUserDetailsService extends UserDetailsService { @Override CineastsUserDetails loadUserByUsername(String login) throws UsernameNotFoundException, DataAccessException; User getUserFromSession(); @Transactional Rating rate(Movie movie, User user, int stars, String comment); @Transactional User register(String login, String name, String password); @Transactional void addFriend(String login, final User userFromSession); } public interface UserRepository extends GraphRepository<User>, RelationshipOperationsRepository<User>, CineastsUserDetailsService { User findByLogin(String login); } public class UserRepositoryImpl implements CineastsUserDetailsService { @Autowired private Neo4jOperations template; @Override public CineastsUserDetails loadUserByUsername(String login) throws UsernameNotFoundException, DataAccessException { final User user = findByLogin(login); if (user==null) throw new UsernameNotFoundException("Username not found: "+login); return new CineastsUserDetails(user); } private User findByLogin(String login) { return template.lookup(User.class,"login",login) .to(User.class).single(); } @Override public User getUserFromSession() { SecurityContext context = SecurityContextHolder.getContext(); Authentication authentication = context.getAuthentication(); Object principal = authentication.getPrincipal(); if (principal instanceof CineastsUserDetails) { CineastsUserDetails userDetails = (CineastsUserDetails) principal; return userDetails.getUser(); } return null; } } public class CineastsUserDetails implements UserDetails { private final User user; public CineastsUserDetails(User user) { this.user = user; } @Override public Collection<GrantedAuthority> getAuthorities() { User.Roles[] roles = user.getRoles(); if (roles ==null) return Collections.emptyList(); return Arrays.<GrantedAuthority>asList(roles); } @Override public String getPassword() { return user.getPassword(); } @Override public String getUsername() { return user.getLogin(); } ... public User getUser() { return user; } }
Any logged-in user was now available in the session, and could be used for all the social
interactions. The remaining work for this was mainly adding controller methods and JSPs
for the views. We used the helper method getUserFromSession()
in the controllers
to access the logged-in user and put it in the model for rendering.
Here's what the UI had evolved to:
To create a nice user experience, we wanted to have a nice looking app. Not something that looked like a toddler made it. So we got some user experience people involved and the results were impressive. This sections presents some of the remaining screen shots of Cineasts.net.
It was now time to pull the data from themoviedb.org.
Registering there and getting an API key was simple, as was using the API on the command-line with
curl
. Looking at the JSON returned for movies and people, we decided to enhance our
domain model and add some more fields to enrich the UI.
Example 15.1. JSON movie response
[{"popularity":3, "translated":true, "adult":false, "language":"en", "original_name":"[Rec]", "name":"[Rec]", "alternative_name":"[REC]", "movie_type":"movie", "id":8329, "imdb_id":"tt1038988", "url":"http://www.themoviedb.org/movie/8329", "votes":11, "rating":7.2, "status":"Released", "tagline":"One Witness. One Camera", "certification":"R", "overview":"\"REC\" turns on a young TV reporter and her cameraman who cover the night shift at the local fire station... "keywords":["terror", "lebende leichen", "obsession", "camcorder", "firemen", "reality tv ", "bite", "cinematographer", "attempt to escape", "virus", "lodger", "live-reportage", "schwerverletzt"], "released":"2007-08-29", "runtime":78, "budget":0, "revenue":0, "homepage":"http://www.3l-filmverleih.de/rec", "trailer":"http://www.youtube.com/watch?v=YQUkX_XowqI", "genres":[{"type":"genre", "url":"http://themoviedb.org/genre/horror", "name":"Horror", "id":27}], "studios":[{"url":"http://www.themoviedb.org/company/2270", "name":"Filmax Group", "id":2270}], "languages_spoken":[{"code":"es", "name":"Spanish", "native_name":"Espa\u00f1ol"}], "countries":[{"code":"ES", "name":"Spain", "url":"http://www.themoviedb.org/country/es"}], "posters":[{"image":{"type":"poster", "size":"original", "height":1000, "width":706, "url":"http://cf1.imgobject.com/posters/3a0/4cc8df415e73d650240003a0/rec-original.jpg", "id":"4cc8df415e73d650240003a0"}}, .... "cast":[{"name":"Manuela Velasco", "job":"Actor", "department":"Actors", "character":"Angela Vidal", "id":34793, "order":0, "cast_id":1, "url":"http://www.themoviedb.org/person/34793", "profile":"http://cf1.imgobject.com/profiles/390/.../manuela-velasco-thumb.jpg"}, ... {"name":"Gl\u00f2ria Viguer", "job":"Costume Design", "department":"Costume \u0026 Make-Up", "character":"", "id":54531, "order":0, "cast_id":21, "url":"http://www.themoviedb.org/person/54531", "profile":""}], "version":150, "last_modified_at":"2011-02-20 23:16:57"}]
Example 15.2. JSON actor response
[{"popularity":3, "name":"Glenn Strange", "known_as":[{"name":"George Glenn Strange"}, {"name":"Glen Strange"}, {"name":"Glen 'Peewee' Strange"}, {"name":"Peewee Strange"}, {"name":"'Peewee' Strange"}], "id":30112, "biography":"", "known_movies":4, "birthday":"1899-08-16", "birthplace":"Weed, New Mexico, USA", "url":"http://www.themoviedb.org/person/30112", "filmography":[{"name":"Bud Abbott Lou Costello Meet Frankenstein", "id":3073, "job":"Actor", "department":"Actors", "character":"The Frankenstein Monster", "cast_id":23, "url":"http://www.themoviedb.org/movie/3073", "poster":"http://cf1.imgobject.com/posters/4ca/.../bud-abbott-lou-costello-meet-frankenstein-cover.jpg", "adult":false, "release":"1948-06-15"}, ...], "profile":[], "version":19, "last_modified_at":"2011-03-07 13:02:35"}]
For the import process we created a separate importer using Jackson (a JSON library) to fetch
and parse the data, and then some transactional methods in the MovieDbImportService
to actually
import it as movies, roles, and actors.
The importer used a simple caching mechanism to keep downloaded actor and movie data on the
filesystem, so that we didn't have to overload the remote API.
In the code below you can see that we've changed the actor to a person so that we can also accommodate
the other folks that participate in movie production.
Example 15.3. Importing the data
@Transactional public Movie importMovie(String movieId) { Movie movie = movieRepository.findById(movieId); if (movie == null) { // Not found: Create fresh movie = new Movie(movieId,null); } Map data = loadMovieData(movieId); if (data.containsKey("not_found")) throw new RuntimeException("Data for Movie "+movieId+" not found."); movieDbJsonMapper.mapToMovie(data, movie); movieRepository.save(movie); relatePersonsToMovie(movie, data); return movie; } private void relatePersonsToMovie(Movie movie, Map data) { Collection<Map> cast = (Collection<Map>) data.get("cast"); for (Map entry : cast) { String id = "" + entry.get("id"); String jobName = (String) entry.get("job"); Roles job = movieDbJsonMapper.mapToRole(jobName); if (job==null) { continue; } switch (job) { case DIRECTED: final Director director = doImportPerson(id, new Director(id)); director.directed(movie); directorRepository.save(director); break; case ACTS_IN: final Actor actor = doImportPerson(id, new Actor(id)); actor.playedIn(movie, (String) entry.get("character")); actorRepository.save(actor); break; } } } public void mapToMovie(Map data, Movie movie) { movie.setTitle((String) data.get("name")); movie.setLanguage((String) data.get("language")); movie.setTagline((String) data.get("tagline")); movie.setReleaseDate(toDate(data, "released", "yyyy-MM-dd")); ... movie.setImageUrl(selectImageUrl((List<Map>) data.get("posters"), "poster", "mid")); }
The last part involved adding a protected URI to the MovieController to allow importing ranges of movies. During testing, it became obvious that the calls to themoviedb.org were a limiting factor. As soon as the data was stored locally, the Neo4j import was a sub-second deal.
In the last part of this exercise we wanted to add recommendations to the app. One obvious recommendation was movies that our fiends liked.
There was this query language called Cypher that looked a bit like SQL but
expressed graph matching queries. So we gave it a try, using the neo4j-shell
,
to incrementally expand the query, just by declaring what relationships we wanted to
be taken into account and which properties of nodes and relationships to filter and
sort on.
Example 16.1. Cypher based movie recommendation on Repository
interface MovieRepository extends GraphRepository<Movie> { @Query(" start user=node({0}) match user-[:FRIEND]-friend-[r:RATED]->movie return movie order by avg(r.stars) desc, count(*) desc limit 10 ") Iterable<Movie> recommendMovies(User me); }
But we didn't have enough friends, so it was time to get some suggested. That would be like-minded cineasts that rated movies similarly to us. Again Cypher to the rescue, this time only a bit more complex. Something that became obvious with both queries is that graph queries are always local, so they start from a node, or set of nodes or relationships, and then expand outwards from there.
Example 16.2. Cypher - Friend Recommendation on Repository
interface UserRepository extends GraphRepository<User> { @Query(" start user=node({0}) match user-[r:RATED]->movie<-[r2:RATED]-likeminded, user-[:FRIEND]-friend where r.stars > 3 and r2.stars >= 3 return likeminded order by count(*) desc limit 10 ") Iterable<User> suggestFriends(User me); }
The controllers simply called these methods, added their results to the model, and the view rendered the recommendations alongside the user's own ratings.
Right now our application was running with the embedded mode of Neo4j which was fine and highly performant. In certain environments you don't have the luxury of file-system access for your webapps and have to talk to a remote database service instead. Neo4j can also run as a server. It exposes its operations via a HTTP based REST API.
We decided to have a look, to be at least knowledgeable about this deployment scenario. We were aware of the difference of local, in-memory calls and higher latency network hops. That would be something we would also take into careful consideration.
Getting the Neo4j-Server was easy, we just went to neo4j.org and downloaded the latest version. Starting it on the command-line (or installing it as a service) was a no-brainer as well.
We copied our store-directory into the data/graph.db
directory of the server and started it
up again.
The admin console of Neo4j-Server, called 'web-admin' is pretty. Using JavaScript, it renders the graph
visually in a highly configurable way. It also gave us the possibility to issue queries over a console,
another handy feature.
So, how would we get our app connected to this server? It turned out the changes in configuration and setup where minimal. Spring Data Neo4j already came with a module that took care of the remote protocol. We added that maven dependency and changed the graph database used in the Spring Configuration.
Example 17.1. Maven Dependency
<dependency> <groupId>org.springframework.data</groupId> <artifactId>spring-data-neo4j-rest</artifactId> <version>2.1.0.RELEASE</version> </dependency>
Example 17.2. Spring Config
<neo4j:config graphDatabaseService="graphDatabaseService"/> <bean id="graphDatabaseService" class="org.springframework.data.neo4j.rest.SpringRestGraphDatabase"> <constructor-arg index="0" value="http://localhost:7474/db/data" /> </bean>
After those two changes we restarted the app, and ... it worked. The transparent handling of the remote API was impressive. We learned that it uses a library called java-rest-binding under the hood which is also usable without the Spring Framework.
Of course we noticed performance implications. Especially after moving the server to a remote machine. It turned out that the server supported remote execution of many operations, allowing us to run the graph traversal and querying inside the server. That means looking at our graph interactions and changing them in a way that switched from the transparent, direct graph access via the entities to a different interaction pattern.
We looked into the different modes of remotely executed operations and found traversals, Cypher and Gremlin queries and index lookups. Most of them already matched our needs but the Cypher and Gremlin approaches were best suited, because they also handled index operations and allowed to return partial attribute sets and subgraphs.
So we looked at our use-case (aka page)-based interactions with the graph entities and converted them to Cypher queries on repositories where appropriate, measuring the performance improvements as we went.
There was also a nice mechanism of mapping Cypher query results to Domain Concepts. You just had to declare and annotate an interface that represents the query results as domain entities and the nodes and relationships returned by Cypher were converted into the appropriate entities.
Example 17.3. Example of query result mapping
public interface MovieRepository extends GraphRepository<Movie> { @Query("START movie=node:Movie(id={0}) MATCH movie-[rating?:rating]->(), movie<-[:ACTS_IN]-actor RETURN movie, COLLECT(actor), AVG(rating.stars)") MovieData getMovieData(String movieId); @MapResult public interface MovieData { @ResultColumn("movie") Movie getMovie(); @ResultColumn("AVG(rating.stars)") Double getRating(); @ResultColumn("COLLECT(actor)") Iterable<Actor> getCast(); } }
This allowed us to get all the data needed for rendering a page in a single call to the server, greatly diminishing the chatter between the client and the server.
Another approach to using the Neo4j-Server would be to write a custom server extension using the
SpringPluginInitializer
provided by spring-data-neo4j-rest
. This extension
would use the well known entities and approaches as it runs inside the server atop an embedded graph
database. From the extension we would expose custom, domain and use-case oriented REST endpoints that
could then be consumed by any kind of webapp, even a pure Javascript based browser app.
Pretty neat. We were satisfied with what we got here, with little effort and high performance. Lots of opportunities to expand the social movie database showed up during development. Like adding more social features like tagging, communication streams, location based features (cinemas) and much more.
But we leave you with that as an exercise to enjoy and explore. Thanks for following the tutorial and make sure to get back to us with suggestions for improvements or reports about unexpected behaviours at the discussion forums, or the issue tracker.
This part of the Spring Data Neo4j Guide book provides the reference documentation. It details many aspects of the tutorial and also explains concepts that were only just mentioned there.
Its content covers information about the programming model, APIs, concepts, annotations and technical details of Spring Data Neo4j.
Whenever you look for the means to employ the full power of the Spring Data Neo4j library you find your answers in the reference section. If you don't, please inform us about missing or incorrect content so that we can fix that.
Spring Data is a SpringSource project that aims to provide Spring's convenient programming model and well known conventions for NOSQL databases. Currently there is support for graph (Neo4j), key-value (Redis, Riak), document (MongoDB) and relational (Oracle) databases. Mark Pollack, the author of Spring.NET, is the project lead for the Spring Data project.
The Spring Data Neo4j project, as part of the Spring Data initiative, aims to simplify development with the Neo4j graph database. Like JPA, it uses annotations on simple POJO domain objects. The annotations activate one of the supported mapping approaches, either the simple mapping or the advanced AspectJ mapping. Both use the annotation and reflection metadata for mapping the POJO entities and their fields to nodes, relationships, and properties in the graph database.
Spring Data Neo4j allows, at any time, to drop down to the Neo4j-API level, see Chapter 19, Introduction to Neo4j to execute functionality with the highest performance possible.
For integration of Neo4j and Grails/GORM please refer to the Neo4j grails plugin. There are also Python bindings as well as community-provided bindings to use Neo4j in embedded or REST mode.
The explanation of Spring Data Neo4j's programming model starts with some underlying details. The basic internal workings of the two mapping modes are explained in the initial chapter. Section 20.1, “Object Graph Mapping” covers the simple mapping and Section 20.2, “Advanced Mapping with AspectJ” contains details about the advanced mapping. It also explains some of the common issues around AspectJ tooling with the current IDEs.
To get started with a simple application, you need only your domain model and the annotations (see Section 20.4, “Defining node entities”) provided by the library. You use annotations to mark domain objects to be reflected by nodes and relationships of the graph database. For individual fields the annotations allow you to declare how they should be processed and mapped to the graph. For property fields and references to other entities this is straightforward.
To use advanced functionality like traversals, Cypher and Gremlin, a basic understanding of the graph data model is required. The graph data model is explained in the chapter about Neo4j, see Chapter 19, Introduction to Neo4j.
Relationships between entities are first class citizens in a graph database and therefore worth a separate chapter (Section 20.5, “Relating node entities”) describing their usage in Spring Data Neo4j.
Indexing operations are useful for finding individual nodes and relationships in a graph. They can be used to
start graph operations or to be processed in your application. Indexing in the plain Neo4j API is a bit more involved.
Spring Data Neo4j maintains automatic indexes per entity class, with @Indexed
annotations on relevant fields.
(Section 20.6, “Indexing”)
Being a Spring Data library, Spring Data Neo4j offers a comprehensive Neo4j-Template (Section 20.7, “Neo4jTemplate”) for interacting with the mapped entities and the Neo4j graph database. The operations provided by Spring Data Neo4j - Repositories per mapped entity class are based on the API offered by the Neo4j-Template. It also provides the operations of the Neo4j Core API in a more convenient way. Especially the querying (Indexes, Cypher, Gremlin and Traversals) and result conversion facilities allow writing very concise code.
Spring Data Commons provides a very powerful repository infrastructure that is also leveraged in Spring Data Neo4j. Those repositories consist only of a composition of interfaces that declare the available functionality in each repository. The implementation details of commonly used persistence methods are handled by the library. At least for typical CRUD, index- and query-operations that is very convenient. The repositories are extensible by annotated, named or derived finder methods. For custom implementations of repository methods you are free to add your own code. (Section 20.8, “CRUD with repositories”).
To be able to leverage the schema-free nature of Neo4j it is possible to project any entity to any other entity type. That is useful as long as they share some properties (or relationships). The entities don't have to share any super-types or hierarchies. How that works is explained here: Section 20.10, “Projecting entities”.
Spring Data Neo4j also allows you to integrate with the powerful geospatial graph library Neo4j-Spatial that offers full support for working with any kind of geo-data. Spring Data Neo4j repositories expose a couple of those operations via bounding-box and near-location searches. Section 20.11, “Geospatial Queries”.
Using computed fields that are dynamically backed by graph operations is a bit more involved. First you should know about traversals, Cypher queries and Gremlin expressions. Those are explained in Chapter 19, Introduction to Neo4j. Then you can start using virtual, computed fields in your entities Section 20.10, “Projecting entities” .
If you like the ActiveRecord approach that uses persistence methods mixed into the domain classes, you will want to look at the description of the additional entity methods (see Section 20.12, “Active Record Methods for Advanced Mapping Mode”) that are added to your domain objects by Spring Data Neo4j Aspects. Those allow you to manage the entity lifecycle as well as to connect entities. Those methods also provide the means to execute the mentioned graph operations with your entity as a starting point.
Neo4j is a fully ACID, enterprise grade database. It uses Java transactions, and internally a 2-phase commit protocol, to guarantee the safety of your data. The implications of that are described in the chapter around transactions. (Section 20.13, “Transactions”)
The need of an active transaction for mutating the state of nodes or relationships implies that direct changes to the graph are only possible in a transactional context. Unfortunately many higher level application layers don't want to care about transactions and the open-session-in-view pattern is not widely used. Therefore Spring Data Neo4j's advanced mappings introduced an entity lifecyle and added support for detached entities which can be used for temporary domain objects that are not intended to be stored in the graph or which will be attached to the graph only later. (Section 20.14, “Detached node entities in advanced mapping mode”)
For the simple mapping this is not neccessary as domain objects are detached by default and have to be explicitly reattached to the graph to store the changes.
Unlike Neo4j which is a schema free database, Spring Data Neo4j works on Java domain objects. So it needs to store the type information in the graph to be able to reconstruct the entities when just nodes are retrieved. To achieve that it employs type-representation-strategies which are described in a separate chapter. (see Section 20.15, “Entity type representation”)
Spring Data Neo4j offers basic support for bean property validation (JSR-303). Annotations from that JSR are recognized and evaluated whenever a property is set, or when a previously detached entity is persisted to the graph. (see Section 20.16, “Bean validation (JSR-303)”)
Unfortunately the setup of Spring Data Neo4j advanced mapping mode is more involved than we'd like. That is partly due to the Maven setup
and dependencies for AspectJ, which can be alleviated by using different build systems like Gradle or Ant/Ivy. The Spring configuration
itself boils down to two lines of <spring-neo4j>
namespace setup. (see Chapter 21, Environment setup)
In a polyglot persistence context Spring Data Neo4j can also be used in a JPA environment to add graph features to your JPA entities. In the Chapter 22, Cross-store persistence the slightly different behavior and setup of a Graph-JPA interaction are described.
The provided samples, which are also publicly hosted on Github, are explained in Chapter 23, Sample code.
The performance implications of using Spring Data Neo4j are detailed in Chapter 25, Performance considerations. This chapter also discusses which use cases should not be handled with Spring Data Neo4j.
As AspectJ might not be well known to everyone, some of the core concepts of the aspect oriented, advanced mapping mode for Java are explained in Chapter 26, AspectJ details.
How to consume the REST-API of a Neo4j-Server is the topic of Chapter 27, Neo4j Server. But Spring Data Neo4j can also be used to create custom Extensions for the Neo4j Server which would serve domain model abstractions to a suitable front-end. So instead of talking low level primitives to a database, the front-end or web-app would communicate via a domain level protocol with endpoints implemented in Jersey and Spring Data Neo4j.
![]() | Note |
---|---|
Please be aware that the advanced mapping mode of Spring Data Neo4j is based on AspectJ and uses some advanced features of that toolset. See the section on AspectJ (Section 20.2, “Advanced Mapping with AspectJ”) for details if you run into any problems. |
A graph database is a storage engine that is specialized in storing and retrieving vast networks of data. It efficiently stores nodes and relationships and allows high performance traversal of those structures. Properties can be added to nodes and relationships.
Graph databases are well suited for storing most kinds of domain models. In almost all domains, there are certain things connected to other things. In most other modeling approaches, the relationships between things are reduced to a single link without identity and attributes. Graph databases allow to keep the rich relationships that originate from the domain, equally well-represented in the database without resorting to also modeling the relationships as "things". There is very little "impedance mismatch" when putting real-life domains into a graph database.
Neo4j is a NOSQL graph database. It is a fully transactional database (ACID) that stores data structured as graphs. A graph consists of nodes, connected by relationships. Inspired by the structure of the human mind, it allows for high query performance on complex data, while remaining intuitive and simple for the developer.
Neo4j has been in commercial development for 10 years and in production for over 7 years. Most importantly it has a helpful and contributing community surrounding it, but it also:
In addition, Neo4j has ACID transactions, durable persistence, concurrency control, transaction recovery, high availability, and more. Neo4j is released under a dual free software/commercial license model.
The API of org.neo4j.graphdb.GraphDatabaseService
provides access to the
storage engine. Its features include creating and retrieving nodes and relationships, managing
indexes (via the IndexManager), database life cycle callbacks, transaction management, and more.
The EmbeddedGraphDatabase
is an implementation of GraphDatabaseService that is used to
embed Neo4j in a Java application. This implementation is used so as to provide the highest
and tightest integration with the database. Besides the embedded mode, the
Neo4j server
provides access to the graph database via an HTTP-based REST API.
Using the API of GraphDatabaseService, it is easy to create nodes and relate them to each other. Relationships are typed. Both nodes and relationships can have properties. Property values can be primitive Java types and Strings, or arrays of both. Node creation and modification has to happen within a transaction, while reading from the graph store can be done with or without a transaction.
Example 19.1. Neo4j usage
GraphDatabaseService graphDb = new EmbeddedGraphDatabase( "helloworld" ); Transaction tx = graphDb.beginTx(); try { Node firstNode = graphDb.createNode(); firstNode.setProperty( "message", "Hello, " ); Node secondNode = graphDb.createNode(); secondNode.setProperty( "message", "world!" ); Relationship relationship = firstNode.createRelationshipTo( secondNode, DynamicRelationshipType.of("KNOWS") ); relationship.setProperty( "message", "brave Neo4j" ); tx.success(); } finally { tx.finish(); }
Getting a single node or relationship and examining it is not the main use case of a graph database.
Fast graph traversal of complex, interconnected data and application of graph algorithms are. Neo4j provides a DSL for defining
TraversalDescription
s that can then be applied to a start node and will produce a
lazy java.lang.Iterable
result of nodes and/or relationships.
Example 19.2. Traversal usage
TraversalDescription traversalDescription = Traversal.description() .depthFirst() .relationships(KNOWS) .relationships(LIKES, Direction.INCOMING) .evaluator(Evaluators.toDepth(5)); for (Path position : traversalDescription.traverse(myStartNode)) { System.out.println("Path from start node to current position is " + position); }
The best way for retrieving start nodes for traversals and queries is by using Neo4j's integrated index
facilities. The GraphDatabaseService
provides access to the IndexManager
which in turn provides
named indexes for nodes and relationships. Both can be indexed with property names and values.
Retrieval is done with query methods on indexes, returning an IndexHits
iterator.
Spring Data Neo4j provides automatic indexing via the @Indexed
annotation, eliminating the need
for manual index management.
![]() | Note |
---|---|
Modifying Neo4j indexes also requires transactions. |
Example 19.3. Index usage
IndexManager indexManager = graphDb.index(); Index<Node> nodeIndex = indexManager.forNodes("a-node-index"); Node node = ...; Transaction tx = graphDb.beginTx(); try { nodeIndex.add(node, "property","value"); tx.success(); } finally { tx.finish(); } for (Node foundNode : nodeIndex.get("property","value")) { // found node }
Neo4j provides a graph query language called "Cypher" which draws from many sources. It resembles SQL but with an iconic representation of patterns in the graph (concepts drawn from SPARQL). The Cypher execution engine was written in Scala to leverage the high expressiveness for lazy sequence operations of the language and the parser combinator library. A screencast explaining the possibilities in detail can be found on the Neo4j video site.
Cypher queries always begin with a start
set of nodes. Those can be either expressed by their
IDs or by an index lookup expression. Those start-nodes are then related to other nodes in the
match
clause. Start and match clauses can introduce new identifiers for nodes and
relationships. In the where
clause additional filtering of the result set is applied by evaluating
expressions. The return
clause defines which part of the query result will be available.
Aggregation also happens in the return clause by using aggregation functions on some of the values.
Sorting can happen in the order by
clause and the skip
and limit
parts
restrict the result set to a certain window.
Cypher can be executed on an embedded graph database using an ExecutionEngine
and
CypherParser
. This is encapsulated in Spring Data Neo4j with
CypherQueryEngine
. The Neo4j-REST-Server comes with a Cypher-Plugin that is accessible remotely and is
available in the Spring Data Neo4j REST-Binding.
Example 19.4. Cypher Examples on the Cineasts.net Dataset
// Actors who played a Matrix movie: start movie=node:Movie("title:Matrix*") match movie<-[:ACTS_IN]-actor return actor.name, actor.birthplace? // User-Ratings: start user=node:User(login='micha') match user-[r:RATED]->movie where r.stars > 3 return movie.title, r.stars, r.comment // Mutual Friend recommendations: start user=node:Micha(login='micha') match user-[:FRIEND]-friend-[r:RATED]->movie where r.stars > 3 return friend.name, movie.title, r.stars, r.comment? // Movie suggestions based on a movie: start movie=node:Movie(id='13') match (movie)<-[:ACTS_IN]-()-[:ACTS_IN]->(suggestion) return suggestion.title, count(*) order by count(*) desc limit 5 // Co-Actors, sorted by count and name of Lucy Liu start lucy=node(1000) match lucy-[:ACTS_IN]->movie<-[:ACTS_IN]-co_actor return count(*), co_actor.name order by count(*) desc,co_actor.name limit 20 // Recommendations including counts, grouping and sorting start user=node:User(login='micha') match user-[:FRIEND]-()-[r:RATED]->movie return movie.title, AVG(r.stars), count(*) order by AVG(r.stars) desc, count(*) desc
Gremlin is an expressive Groovy DSL developed by Marko Rodriguez as part of the Tinkerpop stack. It builds on top of a pipe implementation (Blueprints Pipes) that uses connected operations to traverse a graph. Gremlin has a concise syntax but is Turing complete.
Gremlin can be executed by including the Tinkerpop and Blueprints dependencies and then requesting a ScriptEngine
of type "gremlin" from the javax.Script*
facilities. In Spring Data Neo4j this is encapsulated in
GremlinQueryEngine
. The Neo4j-REST-Server also comes with a Gremlin-Plugin that is accessible remotely and is
available in the Spring Data Neo4j REST-Binding.
Example 19.5. Sample Gremlin Queries
// Vertex with id 1 v = g.v(1) // determine the name of the vertices that vertex 1 knows and that are older than 30 years of age v.outE{it.label=='knows'}.inV{it.age > 30}.name // calculate basic collaborative filtering for vertex 1 m = [:] g.v(1).out('likes').in('likes').out('likes').groupCount(m) m.sort{a,b -> a.value <=> b.value}
This chapter covers the fundamentals of the programming model behind Spring Data Neo4j. It discusses the simple and advanced mapping modes, the annotations provided by Spring Data Neo4j and how to use them. Examples for this section are taken from the "IMDB" project of Spring Data Neo4j examples.
Up until recently Spring Data Neo4j supported only the more advanced and flexible AspectJ based mapping approach, see Section 20.2, “Advanced Mapping with AspectJ”. Feedback about issues with the AspectJ tooling and other implications persuaded us to add a simpler mapping (see Section 20.3, “Simple Object Graph Mapping”) to Spring Data Neo4j. Both versions work with the same annotations and provide similar API's, but differ in behaviour.
Reflection and Annotation-based metadata is collected about persistent entities in the Neo4jMappingContext
which provides it to any part of the library. The information is stored in Neo4jPersistentEntity
instances
which hold all the Neo4jPersistentProperty
's of the type. Each entity can be checked to determine whether it represents
a Node or a Relationship. Properties declare detailed data about their indexing and relationship information as well
as type information that also covers nested generic types. With all that information available it is simple to
select the appropriate strategy for mapping each entity and field to elements, relationships and properties of the graph.
The main difference is in the way of accessing the graph. In the simple mapping the required information is copied into the entity on load and only stored back when an explicit save operation occurs. In the advanced mapping (AspectJ-enhanced) approach a node or relationship is attached via an additional field to the entity and all read- and write-operations (inside of Transactions) happen through that.
For the simple mapping mode, declaration of fetch strategies for related entities is necessary to avoid loading
the whole graph eagerly into memory. The initial approach uses just a simple @Fetch
annotations
on relationship properties. The resulting MappingPolicy
is provided to the infrastructure methods to ensure
the correct loading behaviour. Both, Neo4jPersistentEntiy
and Neo4jPersistentProperty
can be queried for the MappingPolicy
.
Otherwise the two approaches share much of the infrastructure. E.g. for creating new entity instances from type information store in the graph (Section 20.15, “Entity type representation”), the infrastructure for mapping individual fields to graph properties and relationships and everything related to indexing and querying. A certain part of that is also exposed via the Neo4jTemplate for direct use.
Behind the scenes, Spring Data Neo4j leverages AspectJ aspects to modify the behavior of annotated POJO entities (see Chapter 26, AspectJ details). Each node entity is backed by a graph node that holds its properties and relationships to other entities. AspectJ is used for intercepting field access, so that Spring Data Neo4j can retrieve the appropriate information from the entity's backing node or relationship.
The aspect introduces an internal field (entityState
) and some public methods
(see Section 20.12, “Active Record Methods for Advanced Mapping Mode”) to the entities, for instance
entity.getPersistentState()
and entity.relateTo
.
It also introduces some methods for graph operations that start at the current entity.
Introduced methods for equals()
and hashCode()
use the underlying node or relationship.
Please take the introduced field into account when serializing your entities and exclude it from the
serialization process.
Spring Data Neo4j internally uses an abstraction called EntityState
that the field
access and instantiation advices of the aspect delegate to. This way, the aspect code is kept to a
minimum, focusing mainly on the pointcuts and delegation. The EntityState
then uses
a number of FieldAccessorFactories
to create a FieldAccessor
instance per
field that does the specific handling needed for the concrete field type. There is some
caching involved as well, so it handles repeated instantiation efficiently.
To use the advanced, AspectJ based mapping, please add spring-data-neo4j-aspects
as a dependency
and set up the AspectJ integration in Maven or other build tools as explained in Chapter 21, Environment setup.
Some hints for your IDE setup are described below.
As Spring Data Neo4j uses some advanced features of AspectJ, users may experience issues with their IDE reporting errors where in fact there are none. Features that might be reported wrongfully include: introduction of methods to interfaces, declaration of additional interfaces for annotated classes, and generified introduced methods.
IDEs not providing full AspectJ support might mark parts of your code as having errors.
You should rely on your build-system and tests to verify the correctness of the code. You might also have
your Entities (or their interfaces) implement the NodeBacked
and RelationshipBacked
interfaces directly to benefit from completion support and error checking.
Eclipse and STS support AspectJ via the AJDT plugin which can be installed from the update-site listed at http://www.eclipse.org/ajdt/downloads/ (it might be necessary to use the latest development snapshot of the plugin). The current version that does not show incorrect errors is AspectJ 1.6.12 (included in STS 2.8.0), previous versions are reported to mislead the user. Note that AJDT (as of September 2012) requires projects to be rebuild after Eclipse is started to fully support all advanced features.
![]() | Note |
---|---|
There might be some issues with the eclipse maven plugin not adding AspectJ files correctly to the build path.
If you encounter issues, please try the following:
Try editing the build path to |
The AspectJ support in IntelliJ IDEA lacks some of the features. JetBrains is working on improving
the situation in their upcoming 11 release of their popular IDE. Their latest work is available
under their early access program (EAP). Building the project with the AspectJ compiler
ajc
works in IDEA (Options -> Compiler -> Java Compiler should show ajc). Make sure to
give the compiler at least 512 MB of RAM.
In addition to the advanced object graph mapping using AspectJ, Spring Data Neo4j also supports a simpler mode that converts graph data into domain objects and vice versa. It does not require any additional set up and should work out of the box. The simple mapping approach uses the same annotations (???) as the advanced mapping to declare mapping meta-information.
The simple object graph mapping comes into play whenever an entity is constructed from a node or relationship.
This could be done explicitly like during the lookup- or create-operations of the repositories and the
Neo4jTemplate
but also implicitly while executing
any graph operation that returns nodes or relationships and expecting mapped entities to be returned.
It uses the available meta-information about the persistent entity to iterate over its properties and relationships, fetching their data from the graph while doing so. It also executes computed fields and stores the resulting values in the properties.
We try to avoid loading the whole graph into memory by not following relationships eagerly. A dedicated
@Fetch
annotation controls instead if related entities are loaded or not.
Whenever an entity is not fully loaded, then only its id is stored. Those
entities or collections of entities can then later be loaded explicitly using the template.fetch()
operation.
The additional fetch information is stored in a MappingPolicy
which can be retrieved via the Neo4jTemplate
for classes. Both Neo4jPersistentEntitity
as well as Neo4jPersistentProperty
provide access to that
information on their scope.
![]() | Note |
---|---|
Please note that if you have two collections in an entity pointing to the same relationship and one of them has data and the other is empty due to the nature of persisting it, one will override the other in the graph so that you might end up with no data. If you want a relationship-collection to be ignored on save set it to null. |
Example 20.1. Examples for loading entities from the graph
@Autowired Neo4jOperations template; @NodeEntity class Person { String name; @Fetch Person boss; Person spouse; @RelatedTo(type = "FRIEND", direction = BOTH) @Fetch Set<Person> friends; } Person person = template.findOne(personId); assertNotNull(person.getBoss().getName()); assertNotNull(person.getSpouse().getId()); assertNull(person.getSpouse().getName()); template.fetch(person.getSpouse()); assertNotNull(person.getSpouse().getName()); assertEquals(10,person.getFriends().size()); assertNotNull(firstFriend.getName());
![]() | Note |
---|---|
Both the simple mapping approach as well as the fetch strategies (MappingPolicy ) debuted in Spring Data Neo4j 2.0.
So there might be rough edges and there are certainly many areas for improvement and extension. We look forward to your feedback
on this topic.
|
As we tried to encapsulate each aspect of the mapping process into a separate class the resulting fabric of responsibilities is quite
intricate. All of them are set up in the MappingInfrastructure
that is part of the Neo4jTemplate
setup.
Node entities are declared using the @NodeEntity
annotation. Relationship entities use
the @RelationshipEntity
annotation.
The @NodeEntity
annotation is used to turn a POJO class into an entity backed by a node
in the graph database. Fields on the entity are by default mapped to properties of the node. Fields
referencing other node entities (or collections thereof) are linked with relationships. If the
useShortNames
attribute is set to false, the property and relationship names will
have the class name of the entity prepended.
@NodeEntity
annotations are inherited from super-types and interfaces. It is not necessary
to annotate your domain objects at every inheritance level.
If the partial
attribute is set to true, this entity takes part in a cross-store setting,
where the entity lives in both the graph database and a JPA data source. See
Chapter 22, Cross-store persistence for more information.
Entity fields can be annotated with @GraphProperty
, @RelatedTo
,
@RelatedToVia
, @Indexed
, @GraphId
, @Query
and
@GraphTraversal
.
For the simple mapping this is a required field which must be of type Long
. It is used
by Spring Data Neo4j to store the node or relationship-id to re-connect the entity to the graph.
![]() | Note |
---|---|
It must not be a primitive type because then the "non-attached" case can not be represented as the
default value 0 would point to the reference node. Please make also sure that
an |
For the advanced mapping such a field is optional. Only if the underlying id has to be accessed, it is needed.
Entity equality can be a grey area, and it is debatable whether natural keys or database ids best describe equality, there is the issue of versioning over time, etc. For Spring Data Neo4j we have adopted the convention that database-issued ids are the basis for equality, and that has some consequences:
That causes problems if you had inserted the newly created entity into a hash-based collection before saving. While that can be worked around, we strongly advise you adopt a convention of not working with un-attached entities, to keep your code simple. This is best illustrated in code.
Example 20.3. Entity using id-field for equality and attaching new entity immediately
@NodeEntity public class Studio { @GraphId Long id String name; public boolean equals(Object other) { if (this == other) return true; if (id == null) return false; if (! (other instanceof Studio)) return false; return id.equals(((Studio) other).id); } public int hashCode() { return id == null ? System.identityHashCode(this) : id.hashCode(); } } ... Set<Studio> studios = new HashSet<Studio>(); Studio studio = studioRepository.save(new Studio("Ghibli")); studios.add(studio); Studio sameStudio = studioRepository.findOne(studio.id); assertThat(studio, is(equalTo(sameStudio)); assertThat(studios.contains(sameStudio), is(true); assertThat(studios.remove(sameStudio), is(true);
A work-around for the problem of un-attached entities having their hashcode change when they get saved is to cache the hashcode. The hashcode will change next time you load the entity, but at least if you have the entity sitting in a collection, you will still be able to find it:
Example 20.4. Caching hashcode
@NodeEntity public class Studio { @GraphId Long id String name; transient private Integer hash; public boolean equals(Object other) { if (this == other) return true; if (id == null) return false; if (! (other instanceof Studio)) return false; return id.equals(((Studio) other).id); } public int hashCode() { if (hash == null) hash = id == null ? System.identityHashCode(this) : id.hashCode(); return hash.hashCode(); } } ... Set<Studio> studios = new HashSet<Studio>(); Studio studio = new Studio("Ghibli") studios.add(studio); studioRepository.save(studio); assertThat(studios.contains(studio), is(true); assertThat(studios.remove(studio), is(true); Studio sameStudio = studioRepository.findOne(studio.id); assertThat(studio, is(equalTo(sameStudio)); assertThat(studio.hashCode(), is(not(equalTo(sameStudio.hashCode())));
![]() | Note |
---|---|
Remember, transient fields are not saved. |
It is not necessary to annotate property fields, as they are persisted by default; all fields that
contain primitive values are persisted directly to the graph. All fields convertible to a String
using the Spring conversion services will be stored as a string. Spring Data Neo4j includes a
custom conversion factory that comes with converters for Enum
s and Date
s.
Transient fields are not persisted.
Collections of collections of primitive or convertable values are stored as well. They are converted to arrays of their type or strings respectively.
This annotation is typically used with cross-store persistence. When a node entity is configured
as partial, then all fields that should be persisted to the graph must be explicitly annotated
with @GraphProperty
.
@GraphProperty
can specify default values for properties that are not in the graph.
Default values are specified as String representations and will be converted to the correct target
type using the existing conversion facilities.
For example @GraphProperty(defaultValue="20") Integer age
.
It is also possible to declare the type that should be used for the storage inside of Neo4j. For instance
if a Date
property should be stored as an Long value instead of the default String, the
annotation would look like @GraphProperty(propertyType = Long.class)
For the actual mapping of
the Field-Type to the Neo4j-Property type there has to be a Converter registered in the Spring-Config.
The @Indexed annotation can be declared on fields that are intended to be indexed by the Neo4j indexing facilities. The resulting index can be used to later retrieve nodes or relationships that contain a certain property value, e.g. a name. Often an index is used to establish the start node for a traversal. Indexes are accessed by a repository for a particular node or relationship entity type. See Section 20.6, “Indexing” and Section 20.8, “CRUD with repositories” for more information.
The @Query
annotation leverages the delegation infrastructure supported by
Spring Data Neo4j. It provides dynamic fields which, when accessed, return the values
selected by the provided query language expression. The provided query must contain a placeholder named {self}
for the the current entity. For instance the query start n=node({self}) match n-[:FRIEND]->friend return friend
.
Graph queries can return variable number of entities. That's why annotation can be put onto fields
with a single value, a subclass of Iterable of a concrete type or an Iterable of Map<String,Object>
.
Additional parameters are taken from the params attribute of the @Query
annotation.
These parameter tuples form key-value pairs that are provided to the query at execution time.
Example 20.5. @Graph on a node entity field
@NodeEntity public class Group { @Query(value = "start n=node({self}) match (n)-[r]->(friend) where r.type = {relType} return friend", params = {"relType", "FRIEND"}) private Iterable<Person> friends; }
![]() | Note |
---|---|
Please note that this annotation can also be used on repository methods. (Section 20.8, “CRUD with repositories”) |
The @GraphTraversal
annotation also leverages the delegation infrastructure supported by
Spring Data aspects. It provides dynamic fields which, when accessed, return an Iterable
of node or relationship entities that are the result of a traversal starting at the entity containing the field.
The TraversalDescription
used for this is created by the
FieldTraversalDescriptionBuilder
class defined by the traversal
attribute. The class of the resulting node entities must be provided with the
elementClass
attribute.
Example 20.6. @GraphTraversal from a node entity
@NodeEntity public class Group { @GraphTraversal(traversal = PeopleTraversalBuilder.class, elementClass = Person.class, params = "persons") private Iterable<Person> people; private static class PeopleTraversalBuilder implements FieldTraversalDescriptionBuilder { @Override public TraversalDescription build(NodeBacked start, Field field, String... params) { return new TraversalDescriptionImpl() .relationships(DynamicRelationshipType.withName(params[0])) .filter(Traversal.returnAllButStartNode()); } } }
Since relationships are first-class citizens in Neo4j, associations between node entities are represented by relationships. In general, relationships are categorized by a type, and start and end nodes (which imply the direction of the relationship). Relationships can have an arbitrary number of properties. Spring Data Neo4j has special support to represent Neo4j relationships as entities too, but it is often not needed.
![]() | Note |
---|---|
As of Neo4j 1.4.M03, circular references are allowed. Spring Data Neo4j reflects this accordingly. |
Every field of a node entity that references one or more other node entities is backed by relationships in the graph. These relationships are managed by Spring Data Neo4j automatically.
The simplest kind of relationship is a single field pointing to another node entity (1:1).
In this case, the field does not have to be annotated at all, although the annotation may be
used to control the direction and type of the relationship. When setting the field, a
relationship is created when the entity is persisted.
If the field is set to null
, the relationship is removed.
It is also possible to have fields that reference a set of node entities (1:N). These fields come in
two forms, modifiable or read-only. Modifiable fields are of the type Set<T>
,
and read-only fields are Iterable<T>
, where T is a @NodeEntity-annotated
class.
Example 20.8. Node entity with relationships
@NodeEntity public class Actor { @RelatedTo(type = "topActor", direction = Direction.INCOMING) private Set<Movie> topActorIn; @RelatedTo(type = "ACTS_IN") private Set<Movie> movies; }
For the simple mapping, the automatic transitive loading of related entities depends on declaration of
@Fetch
at the property. Otherwise the related node or relationship entities will just be initialized
with their id for later loading.
When using the advanced mapping,
Fields referencing other entities should not be manually initialized, as they are managed by
Spring Data Neo4j Aspects under the hood. 1:N fields can be accessed immediately, and Spring Data Neo4j
will provide a Set
representing the relationships.
If this Set
of related entities is modified, the changes are reflected in the graph,
relationships are added, removed or updated accordingly.
![]() | Note |
---|---|
Spring Data Neo4j ensures by default that there is only one
relationship of a given type between any two given entities. This can be circumvented by using the
|
![]() | Note |
---|---|
Before an entity has been persisted for the first time, it will
not have its state managed by Spring Data Neo4j. For example, given the Actor class defined above,
if |
When an Interface is used as target type for the Set
and/or as elementClass
it should be marked as @NodeEntity
too.
By setting direction to BOTH
, relationships are created in the outgoing direction, but when the
1:N field is read, it will include relationships in both directions. A cardinality of M:N is
not necessary because relationships can be navigated in both directions.
In the advanced mapping mode, the relationships can also be accessed by using the methods
entity.getRelationshipBetween(target, type)
and
entity.relateTo(target, type)
available on each NodeEntity.
These methods find and create Neo4j relationships. It is also possible to manually remove
relationships by using entity.removeRelationshipTo(target, type)
.
Using these methods is significantly faster than adding/removing from the collection of
relationships as it doesn't have to re-synchronize a whole set of relationships with the graph.
Methods of the same semantics exist in the repositories to be used in the simple mapping mode.
![]() | Note |
---|---|
Other collection types than |
To access the full data model of graph relationships, POJOs can also be annotated with
@RelationshipEntity
, making them relationship entities. Just as node entities represent
nodes in the graph, relationship entities represent relationships. As described above,
fields annotated with @RelatedTo
provide a way to only link node entities
via relationships, but it provides no way of accessing the relationships themselves.
Relationship entities can be accessed via by @RelatedToVia-annotated (Section 20.5.3, “@RelatedToVia: Accessing relationship entities”)
fields or methods like entity.getRelationshipTo()
or template|repository.getRelationship(s)Between()
.
Relationship entities either be instantiated directly and set or added to
@RelatedToVia
-annotated fields or created by the introduced
entity.relateTo(), template|repository.createRelationshipBetween()
methods
(see alos Section 20.12, “Active Record Methods for Advanced Mapping Mode”)
Fields in relationship entities are, similarly to node entities, persisted as properties on
the relationship. For accessing the two endpoints of the relationship, two special annotations
are available: @StartNode
and @EndNode
. A field annotated with
one of these annotations will provide read-only access to the corresponding endpoint, depending
on the chosen annotation.
For the relationship-type a String
or RelationshipType
field annotated with @RelationshipType
is available.
When Relationship-Entities are instantiated directly, the relationship type has to be provided either in this
annotated field or as part of the @RelationshipEntity
annotation.
Example 20.9. Relationship entity (in advanced mapping)
@NodeEntity public class Actor { public Role playedIn(Movie movie, String title) { return relateTo(movie, Role.class, "ACTS_IN"); } } @RelationshipEntity public class Role { String title; @StartNode private Actor actor; @EndNode private Movie movie; }
To provide easy programmatic access to the richer relationship entities of the data model,
the annotation @RelatedToVia
can be added on fields of type
Iterable<T>
or Set<T>
or T, where T is a @RelationshipEntity
-annotated
class. These fields provide access to relationship entities.
Example 20.10. Relationship entity (in simple mapping)
@NodeEntity public class Actor { @RelatedToVia @Set<Role> roles=new HashSet<Role>(); public Role playedIn(Movie movie, String title) { Role role=new Role(this,movie,title); roles.add(role); return role; } @RelatedToVia(type="FRIEND_OF", direction=Direction.INCOMING) Friendship bestFriend; } @RelationshipEntity(type = "ACTS_IN") public class Role { String title; @StartNode private Actor actor; @EndNode private Movie movie; } @RelationshipEntity public class Friendship { Date since; @StartNode private Actor actor; @EndNode private Person buddy; }
In the example above we show how to specify a default relationship type, and how to provide the relationship type using an annotation property. Here is an example of using the @RelationshipType annotation on a member variable on the relationship entity; we call this dynamic relationship type.
Example 20.11. Dynamic Relationship Type (simple mapping)
@RelationshipEntity(type = "colleague") public class Acquaintance { @StartNode private Actor actor; @EndNode private Person acquaintance; @RelationshipType private String connection; public Acquaintance(Actor actor, Person acquaintance, String connection) { ... Actor frankSinatra = ... Person carloGambino = ... new Acquaintance(frankSinatra, carloGambino, "its_complicated")
![]() | Note |
---|---|
Because dynamic type information is, well, dynamic, it is generally not possible to read the mapping backwards using SDN. The relationship still exists, but SDN cannot help you access it because it does not know what type you gave it. Also, for this reason, we require you to specify a default relationship type, so that we can at least attempt the reverse mapping. |
Should you happen to provide conflicting relationship types, we have established the following precedence, in priority order:
In some cases, you want to model two different aspects of a conceptual relationship using the same relationship type. Here is a canonical example:
Example 20.12. Clashing Relationship Types
@NodeEntity class Person { @RelatedTo(type="OWNS") Car car; @RelatedTo(type="OWNS") Pet pet; ...
It is clear how we can map these relationships: by looking at the type of the end node. To enable this, we have introduced an boolean annotation parameter enforceTargetType
, which is disabled by default. Our example now reads:
Example 20.13. Discriminating Relationship Types Using End Node Type
@NodeEntity class Person { @RelatedTo(type="OWNS", enforceTargetType=true) Car car; @RelatedTo(type="OWNS", enforceTargetType=true) Pet pet; ...
The example easily generalises to collections too of course, but there are a few note-worthy rules and corner cases:
You need to annotate all clashing relationships.
You can't have two fields, two collections, or a field and a collection, with the same relationship type and identical end node types. SDN does not store metadata about the origin of a relationship. So when saving the entity, the first field or collection would be overwritten by the second, with the processing order being non-deterministic.
You can have clashing relation ship types when end nodes share a supertype.
A variation on the above, you cannot have two fields or two collections with the same relationship type and substitutable end node types.
You can however have a field and a collection where end node types inherit from each other.
Indexing is used in Neo4j to quickly find nodes and relationships to start graph operations from. Either for manually traversing the graph, using the traversal framework, cypher or gremlin queries or for "global" graph operations. Indexes are also employed to ensure uniqueness of elements with certain properties.
The Neo4j graph database employs different index providers for exact lookups and fulltext searches. Lucene is the default index provider implementation. Each named index is configured to be fulltext or exact. There is also a spatial index provider for geo-searches.
When using the standard Neo4j API, nodes and relationships have to be manually indexed with
key-value pairs, typically being the property name and value. When using Spring Data Neo4j,
this task is simplified to just adding an @Indexed
annotation on entity fields
by which the entity should be searchable. This will result in automatic updates of the index
every time an indexed field changes.
Numerical fields are indexed numerically so that they are available for range queries. All
other fields are indexed with their string representation. If a numeric field should not be
indexed numerically, it is possible to switch it off with @Indexed(numeric=false)
.
The @Indexed
annotation also provides the option of using a custom index name. The default index
name is the simple class name of the entity, so that each class typically gets its own index.
It is recommended to not have two entity classes with the same class name, regardless of
package.
If a field is declared in a superclass but different indexes for subclasses are needed, the
level
attribute declares what will be used as index. Level.CLASS
uses the class where the field was declared and Level.INSTANCE
uses the class
that is provided or of the actual entity instance.
The indexes can be queried by using a repository (see
Section 20.8, “CRUD with repositories”).
The repository is an instance of
org.springframework.data.neo4j.repository.IndexRepository
.
The methods findByPropertyValue()
and findAllByPropertyValue()
work on
the exact indexes and return the first or all matches. To do range queries, use
findAllByRange()
(please note that currently both values are inclusive).
For providing explicit index names the repository has to extend NamedIndexRepository
.
This adds the shown methods with another signature that take the index name as first parameter.
Example 20.14. Indexing entities
@NodeEntity class Person { @Indexed(indexName = "people") String name; @Indexed int age; } GraphRepository<Person> graphRepository = template.repositoryFor(Person.class); // Exact match, in named index Person mark = graphRepository.findByPropertyValue("people", "name", "mark"); // Numeric range query, index name inferred automatically for (Person middleAgedDeveloper : graphRepository.findAllByRange("age", 20, 40)) { Developer developer=middleAgedDeveloper.projectTo(Developer.class); }
Spring Data Neo4j also supports fulltext indexes. By default, indexed fields are stored in
an exact lookup index. To have them analyzed and prepared for fulltext search, the
@Indexed
annotation has the type
attribute which can be set to IndexType.FULLTEXT
.
Please note that fulltext indexes require a separate index name as the fulltext configuration
is stored in the index itself.
Access to the fulltext index is provided by the findAllByQuery()
repository method.
Wildcards like *
are allowed. Generally though, the fulltext querying rules of the
underlying index provider apply. See the
Lucene documentation for more
information on this.
Example 20.15. Fulltext indexing
@NodeEntity class Person { @Indexed(indexName = "people-search", type=FULLTEXT) String name; } GraphRepository<Person> graphRepository = template.repositoryFor(Person.class); Person mark = graphRepository.findAllByQuery("people-search", "name", "ma*");
![]() | Note |
---|---|
Please note that indexes are currently created on demand, so whenever an index that doesn't exist is requested from a query or get operation it is created. This is subject to change but has currently the implication that those indexes won't be configured as fulltext which causes subsequent fulltext updates to those indexes to fail. |
Unique indexing with index.putIfAbsent
and UniqueFactory
was introduced in Neo4j 1.6.
It is also available via the REST API.
In Spring Data Neo4j this is made available via Neo4jTemplate.getOrCreateNode
and
Neo4jTemplate.getOrCreateRelationship
.
In an entity at most one field can be annotated with @Indexed(unique=true)
regardless of the index-type used.
The uniqueness will be taken into account when creating the entity by reusing an existing entity if that unique key-combination
already exists. On saving of the field it will be cross-checked against the index and fail with a DataIntegrityViolationException
if the field was changed to an already existing unique value. Null values are no longer allowed for these properties.
![]() | Note |
---|---|
This works for both Node-Entities as well as Relationship-Entities. Relationship-Uniqueness in Neo4j is global so that an existing unique instance of this relationship may connect two completely different nodes and might also have a different type. |
Example 20.16. Unique indexing
// creates or finds a node with the unique index-key-value combination // and initializes it with the properties given template.getOrCreateNode("users", "login", "mh", map("name","Michael","age",37)); @NodeEntity class Person { @Indexed(unique = true) String name; } Person mark1 = repository.save(new Person("mark")); Person mark2 = repository.save(new Person("mark")); // just one node is created assertEquals(mark1,mark2); assertEquals(1, personRepository.count()); Person thomas = repository.save(new Person("thomas")); thomas.setName("mark"); repository.save(thomas); // fails with a DataIntegrityViolationException
The index for a domain class is also available from Neo4jTemplate
via
the getIndex()
method. The second parameter is optional and takes the index name
if it should not be inferred from the class name. It returns the index implementation that is
provided by Neo4j.
Example 20.17. Manual index retrieval by type and name
@Autowired Neo4jTemplate template; // Default index Index<Node> personIndex = template.getIndex(null, Person.class); personIndex.query(new QueryContext(NumericRangeQuery.newÍntRange("age", 20, 40, true, true)) .sort(new Sort(new SortField("age", SortField.INT, false)))); // Named index Index<Node> namedPersonIndex = template.getIndex("people",Person.class); namedPersonIndex.get("name", "Mark"); // Fulltext index Index<Node> personFulltextIndex = template.getIndex("people-search", Person.class); personFulltextIndex.query("name", "*cha*"); personFulltextIndex.query("{name:*cha*}");
It is also possible to pass in the property name of the entity with an @Indexed
annotation whose
index should be returned.
Example 20.18. Manual index retrieval by property configuration
@Autowired Neo4jTemplate template; Index<Node> personIndex = template.getIndex(Person.class, "age"); personIndex.query(new QueryContext(NumericRangeQuery.newÍntRange("age", 20, 40, true, true)) .sort(new Sort(new SortField("age", SortField.INT, false)))); // Fulltext index Index<Node> personFulltextIndex = template.getIndex(Person.class,"name"); personFulltextIndex.query("name", "*cha*"); personFulltextIndex.query("{name:*cha*}");
For querying the index, the template offers query methods that take either the exact match
parameters or a query object/expression, return the results as Result
objects which
can then be converted and projected further using the result-conversion-dsl (see Section 20.7, “Neo4jTemplate”).
Neo4j allows to configure auto-indexing
for certain properties on nodes and relationships. This auto-indexing differs
from the approach used in Spring Data Neo4j because it only updates the indexes when the transaction is committed. So the
index modifications will only be available after the successful commit.
It is possible to use the specific index names node_auto_index
and relationship_auto_index
when
querying indexes in Spring Data Neo4j either with the query methods in template and repositories or via Cypher and Gremlin.
Spring Data Neo4j offers limited support for spatial queries using the neo4j-spatial
library. See the
separate chapter Section 20.11, “Geospatial Queries” for details.
The Neo4jTemplate
offers the convenient API of Spring templates for the Neo4j graph
database. The Spring Data Neo4j Object Graph mapping builds upon the core functionality of the
template to persist objects to the graph and load them in a variety of ways.
The template handles the active mapping mode (Section 20.1, “Object Graph Mapping”) transparently.
Besides methods for creating, storing and deleting entities, nodes and relationships in the graph, Neo4jTemplate
also offers a wide range of query methods. To reduce the proliferation of query methods a simple result handling
DSL was added.
For direct retrieval of nodes and relationships, the getReferenceNode()
,
getNode()
and getRelationship()
methods can be used.
There are methods (createNode()
and createRelationship()
) for creating nodes and
relationships that automatically set provided properties.
Example 20.19. Neo4j template
Neo4jOperations neo = new Neo4jTemplate(graphDatabase); Node mark = neo.createNode(map("name", "Mark")); Node thomas = neo.createNode(map("name", "Thomas")); neo.createRelationshipBetween(mark, thomas, "WORKS_WITH", map("project", "spring-data")); neo.index("devs", thomas, "name", "Thomas"); assertEquals( "Mark", neo.query("start p=node({person}) match p<-[:WORKS_WITH]-other return other.name", map("person", asList(thomas.getId()))).to(String.class).single()); // Gremlin assertEquals(thomas, neo.execute("g.v(person).out('WORKS_WITH')", map("person", mark.getId())).to(Node.class).single()); // Index lookup assertEquals(thomas, neo.lookup("devs", "name", "Thomas").to(Node.class).single()); // Index lookup with Result Converter assertEquals("Thomas", neo.lookup("devs", "name", "Thomas") .to(String.class, new ResultConverter<PropertyContainer, String>() { public String convert(PropertyContainer element, Class<String> type) { return (String) element.getProperty("name"); } }).single());
Neo4jTemplate
provides access to some of the methods of the Neo4j-Core-API directly. So accessing
nodes and relationships (getReferenceNode, getNode, getRelationship, getRelationshipBetween
),
creating nodes and relationships (createNode, createNodeAs, createRelationshipBetween
)
and deleting them (delete, deleteRelationshipBetween
) are supported. It also provides access to
the underlying GraphDatabase via getGraphDatabase
.
Neo4jTemplate
allows to save
, find(One/All)
, count
, delete
and projectTo
entities. It provides the stored type information via getStoredJavaType
and can fetch
lazy-loaded entities or load
them altogether.
All querying methods of the template return a uniform result type: Result<T>
which is also an Iterable<T>
. The query result offers methods of converting each
element to a target type result.to(Type.class)
optionally supplying a
ResultConverter<FROM,TO>
which takes care of custom conversions. By default most
query methods can already handle conversions from and to: Paths, Nodes, Relationship and GraphEntities
as well as conversions backed by registered ConversionServices. A converted Result<FROM>
is an
Iterable<TO>
. Results can be limited to a single value using the
result.single() or result.singleOrNull()
methods. It also offers support for a pure callback function using a Handler<T>
.
Adding nodes and relationships to an index is done with the index()
method.
The lookup()
methods either take a field/value combination to look for exact matches in the
index, or a Lucene query object or string to handle more complex queries. All lookup()
methods return a Result<PropertyContainer>
to be used or transformed.
The traversal methods are at the core of graph operations.
The traverse()
method covers the full traversal operation that takes a
TraversalDescription
(typically built with the template.getGraphDatabase().traversalDescription()
DSL) and runs it from the given start node. traverse
returns a Result<Path>
to be used or transformed.
The Neo4jTemplate
also allows execution of arbitrary Cypher queries. Via the query
methods the statement and parameter-Map are provided. Cypher Queries return tabular results, so the
Result<Map<String,Object>>
contains the rows which can be either used as they are
or converted as needed.
Gremlin Scripts can run with the execute
method, which also takes the parameters that will be
available as variables inside the script. The result of the executions is a generic
Result<Object>
fit for conversion or usage.
The Neo4jTemplate
provides implicit transactions for some of its methods. For instance
save
uses them. For other modifying operations please provide Spring Transaction management
using @Transactional
or the TransactionTemplate
.
If the template is configured to use a SpringRestGraphDatabase
the operations that would
be expensive over the wire,
like traversals and querying are executed efficiently on the server side by using the REST API to forward
those calls. All the other template methods require individual network operations.
The REST-batch-mode of the SpringRestGraphDatabase
is not yet exposed via the template, but it is available
via the graph database.
Neo4j Template offers basic lifecycle events via Spring's event mechanism using ApplicationListener and ApplicationEvent. The following hooks are available in the form of types of application event:
BeforeSaveEvent
AfterSaveEvent
DeleteEvent - after the event has been deleted
The following example demonstrates how to hook into the application lifecycle and register listeners that perform behaviour across types of entities during this life cycle:
Example 20.20. Auditing Entities and Generating Unique Application-level IDs
@Configuration @EnableNeo4jRepositories public class ApplicationConfig extends Neo4jConfiguration { ... @Bean ApplicationListener<BeforeSaveEvent> beforeSaveEventApplicationListener() { return new ApplicationListener<BeforeSaveEvent>() { @Override public void onApplicationEvent(BeforeSaveEvent event) { AcmeEntity entity = (AcmeEntity) event.getEntity(); entity.setUniqueId(acmeIdFactory.create()); } }; } @Bean ApplicationListener<AfterSaveEvent> afterSaveEventApplicationListener() { return new ApplicationListener<AfterSaveEvent>() { @Override public void onApplicationEvent(AfterSaveEvent event) { AcmeEntity entity = (AcmeEntity) event.getEntity(); auditLog.onEventSaved(entity); } }; } @Bean ApplicationListener<DeleteEvent> deleteEventApplicationListener() { return new ApplicationListener<DeleteEvent>() { @Override public void onApplicationEvent(DeleteEvent event) { AcmeEntity entity = (AcmeEntity) event.getEntity(); auditLog.onEventDeleted(entity); } }; } ...
Changes made to entities in the before-save event handler are reflected in the stored entity - after-save ones are not.
The repositories provided by Spring Data Neo4j build on the composable repository infrastructure in Spring Data Commons. They allow for interface based composition of repositories consisting of provided default implementations for certain interfaces and additional custom implementations for other methods.
Spring Data Neo4j repositories support annotated and named queries for the Neo4j
Cypher query-language and
Gremlin
graph DSL.
Spring Data Neo4j comes with typed repository implementations that provide methods for
locating node and relationship entities. There are several types of basic repository interfaces
and implementations. CRUDRepository
provides basic operations,
IndexRepository
and NamedIndexRepository
delegate to Neo4j's internal
indexing subsystem for queries, and TraversalRepository
handles Neo4j traversals.
With the RelationshipOperationsRepository
it is possible to access, create and delete
relationships between entitites or nodes.
The SpatialRepository
allows geographic searches (Section 20.11, “Geospatial Queries”)
GraphRepository
is a convenience repository interface, combining CRUDRepository
,
IndexRepository
, and TraversalRepository
. Generally, it has all the
desired repository methods. If other operations are required then the additional repository interfaces should
be added to the individual interface declaration.
CRUDRepository
delegates to the configured TypeRepresentationStrategy
(see Section 20.15, “Entity type representation”)
for type based queries.
T findOne(id)
boolean exists(id)
EndResult<T> findAll()
(supported in future versions:
EndResult<T> findAll(Sort)
and
Page<T> findAll(Pageable)
)
Long count()
T save(T)
and Iterable<T> save(Iterable<T>)
void delete(T)
, void; delete(Iterable<T>)
,
and deleteAll()
IndexRepository
works with the indexing subsystem and provides methods to find
entities by indexed properties, ranged queries, and combinations thereof. The index key is
the name of the indexed entity field, unless overridden in the @Indexed
annotation.
EndResult<T> findAllByPropertyValue(key, value)
T findByPropertyValue(key, value)
EndResult<T> findAllByRange(key, from, to)
EndResult<T> findAllByQuery(key, queryOrQueryContext)
There is also a NamedIndexRepository
with the same methods, but with an additional index
name parameter, making it possible to query any index.
TraversalRepository
delegates to the Neo4j traversal framework.
Iterable<T> findAllByTraversal(startEntity, traversalDescription)
Queries using the Cypher graph query language can be supplied with the @Query
annotation.
That means every method annotated with @Query("start n=node:IndexName(key={node or 0}) match (n)-->(m) return m")
will use the supplied query string. The named or indexed parameter {node}
will be substituted by the actual method parameter.
Node and Relationship-Entities are handled directly, Iterables thereof as well. All other parameters are
replaced directly (i.e. Strings, Longs, etc). There is special support for the Sort
and Pageable
parameters from Spring Data Commons, which are supported to add programmatic paging and sorting (alternatively
static paging and sorting can be supplied in the query string itself).
For using the named parameters you have to either annotate the parameters of the method with the
@Param("node")
annotation or enable debug symbols. Indexed parameters are always usable.
If it is required that paged results return the correct total count, the @Query
annotation can be supplied with a count query in the countQuery
attribute. This query is executed separately after the result query and its result is used to populate the totalCount
property of the returned Page.
Gremlin queries can be used similarly, the @Query
annotation would just need a type=QueryType.GREMLIN
attribute.
Parameters are supported in the same way.
Spring Data Neo4j also supports the notion of named queries which are externalized in property-config-files
(META-INF/neo4j-named-queries.properties
). Those files have the format:
Entity.finderName=query
(e.g. Person.findBoss=start p=node({0}) match (p)<-[:BOSS]-(boss) return boss
).
Otherwise named queries support the same parameters as annotated queries. For count queries the lookup name is Entity.finderName.count=count-query
.
The default query lookup names can be overriden by using an @Query
annotation with queryName="my-query-name"
or countQueryName="my-query-name"
.
Typical results for queries are Iterable<Type>, Iterable<Map<String,Object>>, Type and Page<Type>
.
Nodes and Relationships are converted to their respective Entities (if they exist). Other values are converted
using the registered Spring conversion services (e.g. enums).
There is a screencast available showing many features of the query language. The following examples are taken from the cineasts dataset of the tutorial section.
start n=node(0) return n
returns the node with id 0
start movie=node:Movie(title='Matrix') return movie
returns the nodes which are indexed with title equal to 'Matrix'
start movie=node:Movie(title='Matrix') match (movie)<-[:ACTS_IN]-(actor) return actor.name
returns the names of the actors that have a ACTS_IN relationship to the movie node for 'Matrix'
start movie=node:Movie(title='Matrix') match (movie)<-[r:RATED]-(user) where r.stars > 3 return user.name, r.stars, r.comment
returns users names and their ratings (>3) of the movie titled 'Matrix'
start user=node:User(login='micha') match (user)-[:FRIEND]-(friend)-[r:RATED]->(movie) return movie.title, AVG(r.stars), COUNT(*) order by AVG(r.stars) desc, COUNT(*) desc
returns the movies rated by the friends of the user 'micha', aggregated by movie.title, with averaged ratings and rating-counts sorted by both
Example 20.21. Examples of Cypher queries placed on repository methods with @Query where values are replaced with method parameters, as described in the the section called “Annotated queries”) section.
public interface MovieRepository extends GraphRepository<Movie> { // returns the node with id equal to idOfMovie parameter @Query("start n=node({0}) return n") Movie getMovieFromId(Integer idOfMovie); // returns the nodes which will use index named title equal to movieTitle parameter // movieTitle String must not contain any spaces, otherwise you will receive a NullPointerException. @Query("start movie=node:Movie(title={0}) return movie") Movie getMovieFromTitle(String movieTitle); // returns the Actors that have a ACTS_IN relationship to the movie node with the title equal to movieTitle parameter. // (The parenthesis around 'movie' and 'actor' in the match clause are optional.) @Query("start movie=node:Movie(title={0}) match (movie)<-[:ACTS_IN]-(actor) return actor") Page<Actor> getActorsThatActInMovieFromTitle(String movieTitle, PageRequest); // returns users who rated a movie (movie parameter) higher than rating (rating parameter) @Query("start movie=node:({0}) " + "match (movie)<-[r:RATED]-(user) " + "where r.stars > {1} " + "return user") Iterable<User> getUsersWhoRatedMovieFromTitle(Movie movie, Integer rating); // returns users who rated a movie based on movie title (movieTitle parameter) higher than rating (rating parameter) @Query("start movie=node:Movie(title={0}) " + "match (movie)<-[r:RATED]-(user) " + "where r.stars > {1} " + "return user") Iterable<User> getUsersWhoRatedMovieFromTitle(String movieTitle, Integer rating); }
As known from Rails or Grails it is possible to derive queries for domain entities from finder method names
like Iterable<Person> findByNameAndAgeGreaterThan(String name, int age)
.
Using the infrastructure in Spring Data Commons that allows to collect the meta information about entities and their properties a finder method
name can be split into its semantic parts and converted into a cypher query.
@Indexed
fields will be converted into index-lookups of the start
clause,
navigation along relationships will be reflected in the match
clause properties with operators will end up as expressions in the
where
clause. Order and limiting of the query will by handled by provided Pageable
or Sort
parameters.
The other parameters will be used in the order they appear in the method signature so they should align with the expressions stated in the method name.
Example 20.22. Some examples of methods and resulting Cypher queries of a PersonRepository
public interface PersonRepository extends GraphRepository<Person> { // start person=node:Person(id={0}) return person Person findById(String id) // start person=node:Person({0}) return person - {0} will be "id:"+name Iterable<Person> findByNameLike(String name) // start person=node:__types__("className"="com...Person") // where person.age = {0} and person.married = {1} // return person Iterable<Person> findByAgeAndMarried(int age, boolean married) // start person=node:__types__("className"="com...Person") // match person<-[:CHILD]-parent // where parent.age > {0} and person.married = {1} // return person Iterable<Person> findByParentAgeAndMarried(int age, boolean married) }
Use the meta information of your domain model classes to declare repository finders that navigate along relationships and compare properties. The path defined with the method name is used to create a Cypher query that is executed on the graph.
Example 20.23. Repository and usage of derived finder methods
@NodeEntity public static class Person { @GraphId Long id; private String name; private Group group; private Person(){} public Person(String name) { this.name = name; } } @NodeEntity public static class Group { @GraphId Long id; private String title; // incoming relationship for the person -> group @RelatedTo(type = "group", direction = Direction.INCOMING) private Set<Person> members=new HashSet<Person>(); private Group(){} public Group(String title, Person...people) { this.title = title; members.addAll(asList(people)); } } public interface PersonRepository extends GraphRepository<Person> { Iterable<Person> findByGroupTitle(String name); } @Autowired PersonRepository personRepository; Person oliver=personRepository.save(new Person("Oliver")); final Group springData = new Group("spring-data",oliver); groupRepository.save(springData); final Iterable<Person> members = personRepository.findByGroupTitle("spring-data"); assertThat(members.iterator().next().name, is(oliver.name));
Spring Data Neo4j supports the new Cypher-DSL to write Cypher queries in a statically typed way. Just by including
CypherDslRepository
to your repository you get the Page<T> query(Execute query, params, Pageable page)
,
Page<T> query(Execute query, Execute countQuery, params, Pageable page)
and the EndResult<T> query(Execute query, params);
. The result type of the Cypher-DSL builder is called
Execute
.
Example 20.24. Examples for Cypher-DSL repository
import static org.neo4j.cypherdsl.CypherQuery.*; import static org.neo4j.cypherdsl.querydsl.CypherQueryDSL.*; public interface PersonRepository extends GraphRepository<Person>, CypherDslRepository<Person> {} @Autowired PersonRepository repo; // START company=node:Company(name={name}) MATCH company<-[:WORKS_AT]->person RETURN person Execute query = start( lookup( "company", "Company", "name", param("name") ) ). match( path().from( "company" ).in( "WORKS_AT" ).to( "person" )). returns( identifier( "person" )) Page<Person> people = repo.query(query , map("name","Neo4j"), new PageRequest(1,10)); QPerson person = QPerson.person; QCompany company = QCompany.company; Execute query = start( lookup( company, "Company", company.name, param("name") ) ). match( path().from( company ).in( "WORKS_AT" ).to( person ). .where(person.firstName.like("P*").and(person.age.gt(25))). returns( identifier(person) ) EndResult<Person> people = repo.query(query , map("name","Neo4j"));
To use Cypher-DSL with Query-DSL the Mysema dependencies have to be declared explicitly as they are optional in the Cypher-DSL project.
<dependency> <groupId>com.mysema.querydsl</groupId> <artifactId>querydsl-core</artifactId> <version>2.2.3</version> <optional>true</optional> </dependency> <dependency> <groupId>com.mysema.querydsl</groupId> <artifactId>querydsl-lucene</artifactId> <version>2.2.3</version> <optional>true</optional> <exclusions> <exclusion> <groupId>org.apache.lucene</groupId> <artifactId>lucene-core</artifactId> </exclusion> </exclusions> </dependency> <dependency> <groupId>com.mysema.querydsl</groupId> <artifactId>querydsl-apt</artifactId> <version>2.2.3</version> <scope>provided</scope> </dependency>
It is possible to use the Cypher-DSL along with the predicates and code generation features of the QueryDSL project. This will allow you to use Java objects as part of the query, rather than strings, for the names of properties and such. In order to get this to work you first have to add a code processor to your Maven build, which will parse your domain entities marked with @NodeEntity, and from that generate QPerson-style classes, as shown in the previous section. Here is what you need to include in your Maven POM file.
<plugin> <groupId>com.mysema.maven</groupId> <artifactId>maven-apt-plugin</artifactId> <version>1.0.2</version> <configuration> <processor>org.springframework.data.neo4j.querydsl.SDNAnnotationProcessor</processor> </configuration> <executions> <execution> <id>test-sources</id> <phase>generate-test-sources</phase> <goals> <goal>test-process</goal> </goals> <configuration> <outputDirectory>target/generated-sources/test</outputDirectory> </configuration> </execution> </executions> </plugin>
This custom QueryDSL AnnotationProcessor will generate the query classes that can be used when constructing Cypher-DSL queries, as in the previous section.
The Repository
instances should normally be injected but can also be created manually via the
Neo4jTemplate
.
Example 20.25. Using basic GraphRepository methods
public interface PersonRepository extends GraphRepository<Person> {} @Autowired PersonRepository repo; // OR GraphRepository<Person> repo = template .repositoryFor(Person.class); Person michael = repo.save(new Person("Michael", 36)); Person dave = repo.findOne(123); Long numberOfPeople = repo.count(); EndResult<Person> devs = graphRepository.findAllByPropertyValue("occupation", "developer"); EndResult<Person> middleAgedPeople = graphRepository.findAllByRange("age", 20, 40); EndResult<Person> aTeam = graphRepository.findAllByQuery("name", "A*"); Iterable<Person> aTeam = repo.findAllByQuery("name", "A*"); Iterable<Person> davesFriends = repo.findAllByTraversal(dave, Traversal.description().pruneAfterDepth(1) .relationships(KNOWS).filter(returnAllButStartNode()));
The recommended way of providing repositories is to define a repository interface per domain class. The mechanisms provided by the repository infrastructure will automatically detect them, along with additional implementation classes, and create an injectable repository implementation to be used in services or other spring beans.
Example 20.26. Composing repositories
public interface PersonRepository extends GraphRepository<Person>, PersonRepositoryExtension {} // configure the repositories, preferably via the neo4j:repositories namespace // (template reference is optional) <neo4j:repositories base-package="org.example.repository" graph-database-context-ref="template"/> // have it injected @Autowired PersonRepository personRepository; // or created via the template PersonRepository personRepository = template.repositoryFor(Person.class); Person michael = personRepository.save(new Person("Michael",36)); Person dave=personRepository.findOne(123); Iterable<Person> devs = personRepository.findAllByPropertyValue("occupation","developer"); Iterable<Person> aTeam = graphRepository.findAllByQuery( "name","A*"); Iterable<Person> friends = personRepository.findFriends(dave); // alternatively select some of the required repositories individually public interface PersonRepository extends CRUDGraphRepository<Node,Person>, IndexQueryExecutor<Node,Person>, TraversalQueryExecutor<Node,Person>, PersonRepositoryExtension {} // provide a custom extension if needed public interface PersonRepositoryExtension { Iterable<Person> findFriends(Person person); } public class PersonRepositoryImpl implements PersonRepositoryExtension { // optionally inject default repository, or use DirectGraphRepositoryFactory @Autowired PersonRepository baseRepository; public Iterable<Person> findFriends(Person person) { return baseRepository.findAllByTraversal(person, friendsTraversal); } } // configure the repositories, preferably via the datagraph:repositories namespace // (template reference is optional) <neo4j:repositories base-package="org.springframework.data.neo4j" graph-database-context-ref="template"/> // have it injected @Autowired PersonRepository personRepository; Person michael = personRepository.save(new Person("Michael",36)); Person dave=personRepository.findOne(123); EndResult<Person> devs = personRepository.findAllByPropertyValue("occupation","developer"); EndResult<Person> aTeam = graphRepository.findAllByQuery( "name","A*"); Iterable<Person> friends = personRepository.findFriends(dave);
![]() | Note |
---|---|
If you use |
Neo4jTemplate
has a generic convert method which might also use projection underneath.
The same conversion facilities that are used by default in the result handling DSL are offered here for individual use.
Supported conversions are: Nodes to Paths and to Entities, Relationships to Paths and to Entities, Paths to Node (EndNode), Relationships (LastRelationship) and to EntityPaths. Entities to Nodes or Relationships.
It is also possible to provide a custom ResultConverter that additionally takes care of conversions.
For both queries executed via the result conversion DSL as well as repository methods, it is possible to specify a conversion of complex query results to POJO interfaces or objects. Those result objects are then populated with the query result data and can be serialized and sent to a different part of the applicaton, e.g. a frontend-ui.
Use an interface annotated with @QueryResult
and getter methods which might be annotated with
@ResultColumn("columnName")
to match the query-result column names. Or use a plain POJO, both work.
Example 20.27. Example of query result mapping
public interface MovieRepository extends GraphRepository<Movie> { @Query("START movie=node:Movie(id={0}) MATCH movie-[rating?:rating]->(), movie<-[:ACTS_IN]-actor RETURN movie, COLLECT(actor), AVG(rating.stars)") MovieData getMovieData(String movieId); @QueryResult public class MovieData { Movie movie; @ResultColumn("AVG(rating.stars)") Double rating; @ResultColumn("COLLECT(actor)") Collection<Actor> cast; } // alternatively use @QueryResult public interface MovieData { @ResultColumn("movie") Movie getMovie(); @ResultColumn("AVG(rating.stars)") Double getRating(); @ResultColumn("COLLECT(actor)") Iterable<Actor> getCast(); } }
As the underlying data model of a graph database doesn't imply and enforce strict type constraints like a relational model does, it offers much more flexibility on how to model your domain classes and which of those to use in different contexts.
For instance an order can be used in these contexts: customer, procurement, logistics, billing, fulfillment and many more. Each of those contexts requires its distinct set of attributes and operations. As Java doesn't support mixins one would put the sum of all of those into the entity class and thereby making it very big, brittle and hard to understand. Being able to take a basic order and project it to a different (not related in the inheritance hierarchy or even an interface) order type that is valid in the current context and only offers the attributes and methods needed here would be very beneficial.
Spring Data Neo4j offers initial support for projecting node and relationship entities to different target types. All instances of this projected entity share the same backing node or relationship, so changes are reflected on the same data.
This could for instance also be used to handle nodes of a traversal with a unified (simpler) type (e.g. for reporting or auditing) and only project them to a concrete, more functional target type when the business logic requires it.
Example 20.28. Projection of entities
@NodeEntity class Trainee { String name; @RelatedTo Set<Training> trainings; } for (Person person : graphRepository.findAllByPropertyValue("occupation","developer")) { Developer developer = person.projectTo(Developer.class); if (developer.isJavaDeveloper()) { trainInSpringData(developer.projectTo(Trainee.class)); } }
SpatialRepository
is a dedicated Repository for spatial queries.
Spring Data Neo4j provides an optional dependency to neo4j-spatial which is an advanced library
for GIS operations. So if you include the maven dependency in your pom.xml
, Neo4j-Spatial and
the required SPATIAL
index provider is available.
Example 20.29. Neo4j-Spatial Dependencies
<dependency>
<groupId>org.neo4j</groupId>
<artifactId>neo4j-spatial</artifactId>
<version>0.7-SNAPSHOT</version>
</dependency>
To have your entities available for spatial index queries, please include a String property containing
a "well known text", location string.
WKT is the Well Known Text Spatial Format
eg. POINT( LON LAT ) or POLYGON (( LON1 LAT1 LON2 LAT2 LON3 LAT3 LON1 LAT1 ))
Example 20.30. Fields of Well Known Text
@NodeEntity class Venue { String name; @Indexed(type = POINT, indexName = "VenueLocation") String wkt; public void setLocation(float lon, float lat) { this.wkt = String.format("POINT( %.2f %.2f )",lon,lat); } } venue.setLocation(56,15);
After adding the SpatialRepository
to your repository you can use the
findWithinBoundingBox, findWithinDistance, findWithinWellKnownText
.
Example 20.31. Spatial Queries
Iterable<Person> teamMembers = personRepository.findWithinBoundingBox("personLayer", 55, 15, 57, 17); Iterable<Person> teamMembers = personRepository.findWithinWellKnownText("personLayer", "POLYGON ((15 55, 15 57, 17 57, 17 55, 15 55))"); Iterable<Person> teamMembers = personRepository.findWithinDistance("personLayer", 16,56,70);
Example 20.32. Methods of the Spatial Repository
public interface SpatialRepository<T> { ClosableIterable<T> findWithinBoundingBox(String indexName, double lowerLeftLat, double lowerLeftLon, double upperRightLat, double upperRightLon); ClosableIterable<T> findWithinDistance( final String indexName, final double lat, double lon, double distanceKm); ClosableIterable<T> findWithinWellKnownText( final String indexName, String wellKnownText); }
This chapter only applies to the advanced mapping. Currently the Aspects introduce the following methods by default, this will change in the future, there will be separate Mixin-Interfaces that can selectively be mixed into the domain entities if needed. Otherwise the AspectJ interaction will be restricted to field access interception and post-constructor handling.
The node and relationship aspects introduce (via AspectJ ITD - inter-type declaration) several methods to the entities.
nodeEntity.persist()
nodeEntity.getNodeId()
and relationshipEntity.getRelationshipId()
entity.getPersistentState()
entity.equals()
and entity.hashCode()
nodeEntity.relateTo(targetEntity, relationshipClass, relationshipType)
nodeEntity.getRelationshipTo(targetEntity, relationshipClass, relationshipType)
nodeEntity.relateTo(targetEntity, relationshipType)
nodeEntity.getRelationshipTo(targetEnttiy, relationshipType)
nodeEntity.removeRelationshipTo(targetEntity, relationshipType)
nodeEntity.remove()
and relationshipEntity.remove()
entity.projectTo(targetClass)
nodeEntity.findAllByTraversal(targetType, traversalDescription)
EntityPath
s of the traversal result
bound to the provided start and end-node-entity types
Iterable<EntityPath> findAllPathsByTraversal(traversalDescription)
{self}
variable with the node-id and returning the results converted to the target type.<T> Iterable<T> NodeBacked.findAllByQuery(final String query, final Class<T> targetType)
{self}
variable with the node-id and returning the original result, but with nodes and relationships replaced by their appropriate entities.Iterable<Map<String,Object>> NodeBacked.findAllByQuery(final String query)
{self}
variable with the node-id and returns a single result converted to the target type.<T> T NodeBacked.findByQuery(final String query, final Class<T> targetType)
Neo4j is a transactional database, only allowing modifications to be performed within transaction
boundaries. Reading data does however not require transactions. Spring Data Neo4j integrates nicely
with both the declarative transaction support with @Transactional
as well as the
manual transaction handling with TransactionTemplate
. It also supports the rollback
mechanisms of the Spring Testing library.
Spring Data Neo4j integrates with transaction managers configured using Spring. The simplest
scenario of just running the graph database uses a SpringTransactionManager
provided by the
Neo4j kernel to be used with Spring's JtaTransactionManager
. That is, configuring Spring to
use Neo4j's transaction manager.
![]() | Note |
---|---|
To avoid name collisons the transaction manager configured by Spring Data Neo4j is called |
![]() | Note |
---|---|
The explicit XML configuration given below is encoded in the |
Example 20.33. Simple transaction manager configuration
<bean id="neo4jTransactionManager" class="org.springframework.data.neo4j.config.JtaTransactionManagerFactoryBean"> <constructor-arg ref="graphDatabaseService"/> </bean> <tx:annotation-driven mode="aspectj" transaction-manager="neo4jTransactionManager"/>
For scenarios with multiple transactional resources there are two options. The first option is to have Neo4j participate in the externally configured transaction manager using the Spring support in Neo4j by enabling the configuration parameter for your graph database. Neo4j will then use Spring's transaction manager instead of its own.
Example 20.34. Neo4j Spring integration
<context:annotation-config /> <context:spring-configured/> <bean id="transactionManager" class="org.springframework.transaction.jta.JtaTransactionManager"> <property name="transactionManager"> <bean id="jotm" class="org.springframework.data.neo4j.transaction.JotmFactoryBean"/> </property> </bean> <bean id="graphDatabaseService" class="org.neo4j.kernel.EmbeddedGraphDatabase" destroy-method="shutdown"> <constructor-arg value="target/test-db"/> <constructor-arg> <map> <entry key="tx_manager_impl" value="spring-jta"/> </map> </constructor-arg> </bean> <tx:annotation-driven mode="aspectj" transaction-manager="transactionManager"/>
One can also configure a stock XA transaction manager (e.g. Atomikos, JOTM, App-Server-TM) to be
used with Neo4j and the other resources. For a bit less secure but fast 1-phase-commit-best-effort,
use ChainedTransactionManager
, which comes bundled with Spring Data Neo4j. It takes a
list of transaction managers as constructor params and will handle them in order for transaction
start and commit (or rollback) in the reverse order.
Example 20.35. ChainedTransactionManager example
<bean id="jpaTransactionManager" class="org.springframework.orm.jpa.JpaTransactionManager"> <property name="entityManagerFactory" ref="entityManagerFactory"/> </bean> <bean id="jtaTransactionManager" class="org.springframework.data.neo4j.config.JtaTransactionManagerFactoryBean"> <constructor-arg ref="graphDatabaseService"/> </bean> <bean id="transactionManager" class="org.springframework.data.neo4j.transaction.ChainedTransactionManager"> <constructor-arg> <list> <ref bean="jpaTransactionManager"/> <ref bean="jtaTransactionManager"/> </list> </constructor-arg> </bean> <tx:annotation-driven mode="aspectj" transaction-manager="transactionManager"/>
This section only applies to the advanced mapping (AspectJ-backed). The simple mapping always detaches entities on load as it copies the data out of the graph into the entities and stores it back fully too.
Node entities can be in two different persistence states: attached or detached. By default, newly created node
entities are in the detached state. When persist() or template.save()
is called on the entity, it becomes
attached to the graph, and its properties and relationships are stores in the database. If
the save operation is not called within a transaction, it automatically creates an implicit
transaction only for the operation.
Changing an attached entity inside a transaction will immediately write through the changes to the datastore. Whenever an entity is changed outside of a transaction it becomes detached. The changes are stored in the entity (its fields) itself until the next call to a save operation.
All entities returned by library functions are initially in an attached state.
Just as with any other entity, changing them outside of a transaction detaches them, and they
must be reattached with persist()
for the data to be saved.
Example 20.36. Persisting entities
@NodeEntity class Person { String name; Person(String name) { this.name = name; } } // Store Michael in the database. Person p = new Person("Michael").persist();
As mentioned above, an entity simply created with the new
keyword starts out detached.
It also has no state assigned to it. If you create a new entity with new
and then throw
it away, the database won't be touched at all.
Now consider this scenario:
Example 20.37. Relationships outside of transactions
@NodeEntity class Movie { private Actor topActor; public void setTopActor(Actor actor) { topActor = actor; } } @NodeEntity class Actor { } Movie movie = new Movie(); Actor actor = new Actor(); movie.setTopActor(actor);
Neither the actor nor the movie has been assigned a node in the graph. If we were to call
movie.persist()
, then Spring Data Neo4j would first create a node for the movie.
It would then note that there is a relationship to an actor, so it would call actor.persist()
in a cascading fashion. Once the actor has been persisted, it will create the relationship
from the movie to the actor. All of this will be done atomically in one transaction.
Important to note here is that if actor.persist()
is called instead, then only
the actor will be persisted. The reason for this is that the actor entity knows nothing about
the movie entity. It is the movie entity that has the reference to the actor. Also note that
this behavior is not dependent on any configured relationship direction on the annotations.
It is a matter of Java references and is not related to the data model in the database.
The save operation (merge) stores all properties of the entity to the graph database and puts the entity in attached mode. There is no need to update the reference to the Java POJO as the underlying backing node handles the read-through transparently. If multiple object instances that point to the same node are persisted, the ordering is not important as long as they contain distinct changes. For concurrent changes a concurrent modification exception is thrown (subject to be parameterized in the future).
If the relationships form a cycle, then the entities will first of all be assigned a node in
the database, and then the relationships will be created. The cascading of persist()
is however only cascaded to related entity fields that have been modified.
In the following example, the actor and the movie are both attached entites, having both been previously persisted to the graph:
In this case, even though the movie has a reference to the actor, the name change on the actor
will not be persisted by the call to movie.persist()
. The reason for this is, as
mentioned above, that cascading will only be done for fields that have been modified. Since the
movie.topActor
field has not been modified, it will not cascade the persist operation
to the actor.
There are several ways to represent the Java type hierarchy of the data model in the graph. In general, for all node and relationship entities, type information is needed to perform certain repository operations. Some of this type information hierarchy is saved in the graph database.
As the type information is also stored in node/relationship-properties and/or indexes it might amount to a substantial
amount of data in the graph. It is possible to use an @TypeAlias("name")
annotation on nodes and relationships to have a
short constant name for each type which is (unlike the default approach) renaming-refactoring-safe.
For using the simple class name by default, register a Neo4jMappingContext
bean configured with an
instance of EntityAlias
.
It is also possible to opt out of storing type information using the NoopTypeRepresentationStrategies
.
Implementations of TypeRepresentationStrategy
take care of persisting this information during entity instance
creation. They also provide the repository methods that use this type information to perform their operations,
like findAll
and count
. The derived finderMethods also use the type information for graph global queries.
There are three available implementations for node entities to choose from.
IndexingNodeTypeRepresentationStrategy
this is the default strategy used.
Stores entity types in the integrated index. Each entity node gets indexed with its type and
all supertypes and interfaces that are also @NodeEntity
-annotated. The special index used for this
is named __types__
. Additionally, in order to retrieve the type of an entity node, each
node has a property __type__
with the fully qualified type of that entity.
SubReferenceNodeTypeRepresentationStrategy
Stores entity types in a tree in the graph representing the type and interface hierarchy. Each entity has a INSTANCE_OF relationship to a type node representing that entity's type. The type may or may not have a SUBCLASS_OF relationship to another type node.
NoopNodeTypeRepresentationStrategy
Does not store any type information, and does hence not support finding by type, counting by type, or retrieving the type of any entity.
There are two implementations for relationship entities available, with the same behavior as the corresponding ones above:
IndexingRelationshipTypeRepresentationStrategy
Stores relationship entity types in the integrated index. Each entity relationship gets indexed with its type and
all supertypes and interfaces that are also @RelationshipEntity
-annotated. The special index used for this
is named __rel_types__
. Additionally, in order to retrieve the type of an entity relationship, each
relationship has a property __type__
with the fully qualified type of that entity.
NoopRelationshipTypeRepresentationStrategy
Spring Data Neo4j will by default autodetect which are the most suitable strategies for node and relationship
entities. For new data stores, it will always opt for the indexing strategies. If a data store was created
with the olderSubReferenceNodeTypeRepresentationStrategy
, then it will continue to use that
strategy for node entities. It will however in that case use the no-op strategy for relationship entities,
which means that the old data stores have no support for searching for relationship entities. The indexing
strategies are recommended for all new users.
Spring Data Neo4j supports property-based validation support. When a property is changed and persisted, it is
checked against the annotated constraints, e.g. @Min
, @Max
,
@Size
, etc. Validation errors throw a ValidationException
. The validation
support that comes with Spring is used for evaluating the constraints. To use this feature, a validator
has to be registered with the Neo4jTemplate
, which is done automatically by the Neo4jConfiguration
if one is present in the Spring Config.
Example 20.39. Bean validation
@NodeEntity class Person { @Size(min = 3, max = 20) String name; @Min(0) @Max(100) int age; }
The validation supports needs the bean validation API and a reference implementation configured. Right now this is the Hibernate Validator by default (which is not integrated with Hibernate ORM). The maven dependency is:
Example 20.40. Validation setup
<dependency> <groupId>org.hibernate</groupId> <artifactId>hibernate-validator</artifactId> <version>4.2.0.Final</version> </dependency> // the application-context should contain a LocalValidatorFactoryBean <bean id="validator" class="org.springframework.validation.beanvalidation.LocalValidatorFactoryBean"/>
Spring Data Neo4j dramatically simplifies development, but some setup is naturally required. For building the application, Maven needs to be configured to include the Spring Data Neo4j dependencies. For the advanced mapping mode, it is necessary to configure the AspectJ weaving. After the build setup is complete, the Spring application needs to be configured to make use of Spring Data Neo4j. Examples for these different setups can be found in the Spring Data Neo4j examples.
Spring Data Neo4j projects can be built using Maven. There are also means to build them with Gradle or Ant/Ivy.
For the simple POJO mapping it is enough to add the org.springframework.data:spring-data-neo4j:2.1.0.RELEASE
dependency
to your project.
Example 21.1. Maven dependencies for Spring Data Neo4j
<dependency> <groupId>org.springframework.data</groupId> <artifactId>spring-data-neo4j</artifactId> <version>2.1.0.RELEASE</version> </dependency>
The necessary build plugin to build Spring Data Neo4j projects with Gradle is available as part of the Spring Data Neo4j distribution or on Github which makes the usage as easy as:
Example 21.2. Gradle Build Configuration
sourceCompatibility = 1.6 targetCompatibility = 1.6 springVersion = "3.1.0.RELEASE" springDataNeo4jVersion = "2.1.0.RELEASE" aspectjVersion = "1.6.12" apply from:'https://github.com/SpringSource/spring-data-neo4j/raw/master/build/ gradle/springdataneo4j.gradle' configurations { runtime testCompile } repositories { mavenCentral() mavenLocal() mavenRepo urls: "http://maven.springframework.org/release" }
The actual springdataneo4j.gradle
is very simple, just decorating the javac
tasks with the iajc
ant task.
The supplied sample ant build configuration is mainly about resolving the dependencies for Spring Data Neo4j Aspects and AspectJ using Ivy and integrating the iajc ant task in the build.
Example 21.3. Ant/Ivy Build Configuration
<taskdef resource="org/aspectj/tools/ant/taskdefs/aspectjTaskdefs.properties" classpath="${lib.dir}/aspectjtools.jar"/> <target name="compile" description="Compile production classes" depends="lib.retrieve"> <mkdir dir="${main.target}" /> <iajc sourceroots="${main.src}" destDir="${main.target}" classpathref="path.libs" source="1.6"> <aspectpath> <pathelement location="${lib.dir}/spring-aspects.jar"/> </aspectpath> <aspectpath> <pathelement location="${lib.dir}/spring-data-neo4j-aspects.jar"/> </aspectpath> </iajc> </target>
Spring Data Neo4j projects are easiest to build with Apache Maven. The core dependency is Spring Data Neo4j Aspects which comes with transitive dependencies to Spring Data Neo4j, Spring Data Commons, parts of the Spring Framework, AspectJ and the Neo4j graph database.
The milestone releases of Spring Data Neo4j are available from the dedicated milestone repository. Neo4j releases and milestones are available from Maven Central.
Example 21.4. Spring milestone repository
<repository> <id>spring-maven-milestone</id> <name>Springframework Maven Repository</name> <url>http://maven.springframework.org/milestone</url> </repository>
The dependency on spring-data-neo4j-aspects
will transitively pull in the necessary parts of
Spring Framework (core, context, aop, aspects, tx), AspectJ, Neo4j, and Spring Data Commons. If you
already use these (or different versions of these) in your project, then include those dependencies
on your own. In this case, please make sure that the versions match.
If you want to use Gremlin, please add the dependency (which is optional in SDN)
accordingly.
Example 21.5. Maven dependencies
<dependency> <groupId>org.springframework.data</groupId> <artifactId>spring-data-neo4j-aspects</artifactId> <version>2.1.0.RELEASE</version> </dependency> <dependency> <groupId>org.aspectj</groupId> <artifactId>aspectjrt</artifactId> <version>1.6.12</version> </dependency>
Since the advanced mapping uses AspectJ for build-time aspect weaving of entities, it is necessary to hook the AspectJ Maven plugin into the build process. The plugin also has its own dependencies. You also need to explicitly specify the aspect libraries (spring-aspects and spring-data-neo4j-aspects).
Example 21.6. AspectJ configuration
<plugin> <groupId>org.codehaus.mojo</groupId> <artifactId>aspectj-maven-plugin</artifactId> <version>1.2</version> <dependencies> <!-- NB: You must use Maven 2.0.9 or above or these are ignored (see MNG-2972) --> <dependency> <groupId>org.aspectj</groupId> <artifactId>aspectjrt</artifactId> <version>1.6.12</version> </dependency> <dependency> <groupId>org.aspectj</groupId> <artifactId>aspectjtools</artifactId> <version>1.6.12</version> </dependency> </dependencies> <executions> <execution> <goals> <goal>compile</goal> <goal>test-compile</goal> </goals> </execution> </executions> <configuration> <outxml>true</outxml> <aspectLibraries> <aspectLibrary> <groupId>org.springframework</groupId> <artifactId>spring-aspects</artifactId> </aspectLibrary> <aspectLibrary> <groupId>org.springframework.data</groupId> <artifactId>spring-data-neo4j-aspects</artifactId> </aspectLibrary> </aspectLibraries> <source>1.6</source> <target>1.6</target> </configuration> </plugin>
Users of Spring Data Neo4j have two ways of very concisely configuring it. Either they can use a Spring Data Neo4j XML configuration namespace, or they can use a Java-based bean configuration.
The XML namespace can be used to configure Spring Data Neo4j. The config
element
provides an XML-based configuration of Spring Data Neo4j in one line. It has three attributes.
graphDatabaseService
points out the Neo4j instance to use. For convenience,
storeDirectory
can be set instead of graphDatabaseService
to
point to a directory where a new EmbeddedGraphDatabase
will be created. For
cross-store configuration, the entityManagerFactory
attribute needs to be
configured.
Example 21.7. XML configuration with store directory
<?xml version="1.0" encoding="UTF-8" standalone="yes"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:context="http://www.springframework.org/schema/context" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:neo4j="http://www.springframework.org/schema/data/neo4j" xsi:schemaLocation=" http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context.xsd http://www.springframework.org/schema/data/neo4j http://www.springframework.org/schema/data/neo4j/spring-neo4j.xsd"> <context:annotation-config/> <neo4j:config storeDirectory="target/config-test"/> </beans>
Example 21.8. XML configuration with GraphDatabaseService bean
<context:annotation-config/> <bean id="graphDatabaseService" class="org.neo4j.kernel.EmbeddedGraphDatabase" destroy-method="shutdown"> <constructor-arg index="0" value="target/config-test"/> <!-- optionally pass in neo4j-config parameters to the graph database <constructor-arg index="1"> <map> <entry key="allow_store_upgrade" value="true"/> </map> </constructor-arg> --> </bean> <neo4j:config graphDatabaseService="graphDatabaseService"/>
Example 21.9. XML configuration with embedded Neo4j-Server
<context:annotation-config/> <bean id="graphDatabaseService" class="org.neo4j.kernel.EmbeddedGraphDatabase" destroy-method="shutdown"> <constructor-arg index="0" value="foo/db" /> <constructor-arg index="1"> <map><entry key="enable_remote_shell" value="true"/></map> </constructor-arg> </bean> <bean id="serverWrapper" class="org.neo4j.server.WrappingNeoServerBootstrapper" init-method="start" destroy-method="stop"> <constructor-arg ref="graphDatabaseService"/> </bean> // also add the static server-assets dependency to your pom.xml <dependency> <groupId>org.neo4j.app</groupId> <artifactId>neo4j-server</artifactId> <classifier>static-web</classifier> <version>${neo4j-version}</version> </dependency>
Example 21.10. XML configuration with cross-store
<context:annotation-config/> <bean class="org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean" id="entityManagerFactory"> <property name="dataSource" ref="dataSource"/> <property name="persistenceXmlLocation" value="classpath:META-INF/persistence.xml"/> </bean> <neo4j:config storeDirectory="target/config-test" entityManagerFactory="entityManagerFactory"/>
Spring Data Neo4j repositories are configured using the <neo4j:repositories>
element which defines the base-package (or packages) for the repositories.
A reference to an existing Neo4jTemplate
bean reference can be passed in as well.
As Spring Data Neo4j repositories build upon the infrastructure provided by Spring Data Commons, the configuration options for repositories described there work here as well.
Example 21.11. XML configuration for repositories
<neo4j:repositories base-package="org.example.repository"/> <!-- with template bean reference --> <neo4j:repositories base-package="org.example.repository" graph-database-context-ref="template"/>
You can also configure Spring Data Neo4j using Java-based bean metadata.
![]() | Note |
---|---|
For those not familiar with Java-based bean configuration in Spring, we recommend that you read up on it first. The Spring documentation has a high-level introduction as well as detailed documentation on it. |
In order to configure Spring Data Neo4j with Java-based bean config, the class
Neo4jConfiguration
is registered with the context. This is either done
explicitly in the context configuration, or via classpath scanning for classes that
have the @Configuration annotation. The only thing that must be provided is the
GraphDatabaseService
. The example below shows how to register the
@Configuration Neo4jConfiguration
class, as well as Spring's
ConfigurationClassPostProcessor
that transforms the
@Configuration
class to bean definitions.
Example 21.12. Java-based bean configuration
<![CDATA[<beans ...>
...
<tx:annotation-driven mode="aspectj" transaction-manager="transactionManager"/>
<bean class="org.springframework.data.neo4j.config.Neo4jConfiguration"/>
<bean class="org.springframework.context.annotation.ConfigurationClassPostProcessor"/>
<bean id="graphDatabaseService" class="org.neo4j.kernel.EmbeddedGraphDatabase"
destroy-method="shutdown" scope="singleton">
<constructor-arg index="0" value="target/config-test"/>
</bean>
...
</beans>
Additional beans can be configured to be included in the Neo4j-Configuration just by defining them in the Spring context. ConversionService for custom conversions, Validators for bean validation, TypeRepresentationStrategyFactory for configuring the in graph type representation, IndexProviders for custom index handling (e.g. for multi-tenancy) or Entity-Instantiators (with their config) to have more control over the creation of entity instances and much more.
The Spring Data Neo4j project support cross-store persistence for the advanced mapping mode, which allows for parts of the data to be stored in a traditional JPA data store (RDBMS), and other parts in a graph store. This means that an entity can be partially stored in e.g. MySQL, and partially stored in Neo4j.
This allows existing JPA-based applications to embrace NOSQL data stores for evolving certain parts of their data model. Possible use cases include adding social networking or geospatial information to existing applications.
Partial graph persistence is achieved by restricting the Spring Data Neo4j aspects to manage only
explicitly annotated parts of the entity. Those fields will be made @Transient
by the
aspect so that JPA ignores them.
A backing node in the graph store is only created when the entity has been assigned a JPA ID. Only then will the association between the two stores be established. Until the entity has been persisted, its state is just kept inside the POJO (in detached state), and then flushed to the backing graph database on the persist operation.
The association between the two entities is maintained via a FOREIGN_ID field in the node, that
contains the JPA ID. Currently only single-value IDs are supported. The entity class can be resolved
via the TypeRepresentationStrategy
that manages the Java type hierarchy within the graph
database. Given the ID and class, you can then retrieve the appropriate JPA entity for a given node.
The other direction is handled by indexing the Node with the FOREIGN_ID index which contains a concatenation of the fully qualified class name of the JPA entity and the ID. The matching node can then be found using the indexing facilities, and the two entities can be reassociated.
Using these mechanisms and the Spring Data Neo4j aspects, a single POJO can contain some fields handled by JPA and others handles by Spring Data Neo4j. This also includes relationship fields persisted in the graph database.
Cross-store persistence only requires the use of one additional annotation: @GraphProperty
.
See below for details and an example.
When annotating an entity with partial = true
, this marks it as a cross-store entity.
Spring Data Neo4j will thus only manage fields explicitly annotated with @GraphProperty
.
Fields of primitive or convertible types do not normally have to be annotated in order to be
persisted by Spring Data Neo4j. In cross-store mode, Spring Data Neo4j only
persists fields explicitly annotated with @GraphProperty
. JPA will ignore these fields.
The following example is taken from the Spring Data Neo4j examples myrestaurants-social project:
Example 22.1. Cross-store node entity
@Entity @Table(name = "user_account") @NodeEntity(partial = true) public class UserAccount { private String userName; private String firstName; private String lastName; @GraphProperty String nickname; @RelatedTo Set<UserAccount> friends; @RelatedToVia(type = "recommends") Iterable<Recommendation> recommendations; @Temporal(TemporalType.TIMESTAMP) @DateTimeFormat(style = "S-") private Date birthDate; @ManyToMany(cascade = CascadeType.ALL) private Set<Restaurant> favorites; @Id @GeneratedValue(strategy = GenerationType.AUTO) @Column(name = "id") private Long id; public void knows(UserAccount friend) { relateTo(friend, "friends"); } public Recommendation rate(Restaurant restaurant, int stars, String comment) { Recommendation recommendation = relateTo(restaurant, Recommendation.class, "recommends"); recommendation.rate(stars, comment); return recommendation; } public Iterable<Recommendation> getRecommendations() { return recommendations; } }
Configuring cross-store persistence is done similarly to the default Spring Data Neo4j configuration.
All you need to do is to specify an entityManagerFactory
in the XML namespace
config
element, and Spring Data Neo4j will configure itself for cross-store use.
Example 22.2. Cross-store Spring configuration
<beans xmlns="http://www.springframework.org/schema/beans" xmlns:context="http://www.springframework.org/schema/context" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:datagraph="http://www.springframework.org/schema/data/neo4j" xsi:schemaLocation=" http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context.xsd http://www.springframework.org/schema/data/neo4j http://www.springframework.org/schema/data/neo4j/spring-neo4j.xsd "> <context:annotation-config/> <neo4j:config storeDirectory="target/config-test" entityManagerFactory="entityManagerFactory"/> <bean class="org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean" id="entityManagerFactory"> <property name="dataSource" ref="dataSource"/> <property name="persistenceXmlLocation" value="classpath:META-INF/persistence.xml"/> </bean> </beans>
Spring Data Neo4j comes with a number of sample applications. The source code of the samples can be found on Github. The different sample projects are introduced below.
The Hello Worlds sample application is a simple console application. It creates some worlds (node entities) and rocket routes (relationships) between worlds, all in a galaxy (the graph), and then prints them.
The unit tests demonstrate some other features of Spring Data Neo4j as well. The sample comes with a minimal configuration for Maven and Spring to get up and running quickly.
The Hello Worlds application is available both for the simple mapping (hello-worlds
)
and for the advanced mapping (hello-world-aspects
).
Executing the application creates the following graph in the graph database:
The IMDB sample is a web application that imports datasets from the Internet Movie Database (IMDB) into the graph database. It allows the listing of movies with their actors, and of actors and their roles in different movies. It also uses graph traversal operations to calculate the Bacon number of any given actor. This sample application shows the usage of Spring Data Neo4j in a more complex setting, using several annotated entities and relationships as well as indexes and in-graph indexes and graph traversals.
See the readme file for instructions on how to compile and run the application.
An excerpt of the data stored in the graph database after executing the application:
Simple, JPA-based web application for managing users and restaurants, with the ability to add restaurants as favorites to a user. It is basically the foundation for the MyRestaurants-Social application (seeSection 23.5, “MyRestaurant-Social sample application”), and does therefore not use Spring Data Neo4j.
This application extends the MyRestaurants sample application, adding social networking functionality to it with cross-store persistence. The web application allows for users to add friends and rate restaurants. A graph traversal provides recommendations based on your friends' (and their friends') rating of restaurants.
Here's an excerpt of the data stored in the graph database after executing the application:
The cineasts.net application was introduced extensively in the first part of this guide, the tutorial. The tutorial covers the development of the simple mapping version of cineasts.
To document the differences, versions for the advanced mapping (cineasts-aspects
)
and accessing the remote server (cineasts-rest
) are also available.
A online version of cineasts can be found on cineasts.net. A sample dataset of the cineasts databse is available at the neo4j sample-data page.
This is a subset of the visualization of the cineasts graph for the "Matrix" movie.
Deploying your application into the cloud is a great way to scale from from "wouldn't it be cool if.." to giving interviews to Forbes, Fast Company, and Jimmy Fallon. Heroku makes it super easy to provision everying you need, including a Neo4j Add-on. With a few simple adjustments, your Spring Data Neo4j application is ready to take that first step into the cloud.
To deploy your Spring Data Neo4j web application to Heroku, you'll need:
account on Heroku
git command line
maven-based project
standard Spring MV Servlet application
well, and Spring Data Neo4j REST
For reference, the following sections detail the steps taken to make the Spring Data Neo4j Todos example ready for deployment to Heroku.
Usually, a Spring MVC application is bundled into a war and deployed to an application server like Tomcat. But Heroku can host any kind of java application. It just needs to know what to launch. So, we'll transform the war into a self-hosted servlet using an embedded Jetty server, then add a startup script to launch it.
First, we'll add the dependencies for Jetty to the pom.xml
:
Example 24.1. Jetty dependencies - pom.xml
<dependency> <groupId>org.eclipse.jetty</groupId> <artifactId>jetty-webapp</artifactId> <version>7.4.4.v20110707</version> </dependency> <dependency> <groupId>org.mortbay.jetty</groupId> <artifactId>jsp-2.1-glassfish</artifactId> <version>2.1.v20100127</version> </dependency>
Then we'll change the scope of the servlet-api artifact from provided
to compile
.
This library is normally provided at runtime by the application container. Since we're self-hosting,
it needs to be included directly. Make sure the servlet-api dependency looks like this:
Example 24.2. servlet-api dependencies - pom.xml
<dependency> <groupId>javax.servlet</groupId> <artifactId>servlet-api</artifactId> <version>2.5</version> <scope>compile</scope> </dependency>
We could provide a complicated command-line to Heroku to launch the app. Instead, we'll simplify
the command-line by using the appassembler-maven-plugin
to create a launch script. Add the plugin
to your pom's build/plugins
section:
Example 24.3. appassembler-maven-plugin configuration pom.xml
<plugin> <groupId>org.codehaus.mojo</groupId> <artifactId>appassembler-maven-plugin</artifactId> <version>1.1.1</version> <executions> <execution> <phase>package</phase> <goals><goal>assemble</goal></goals> <configuration> <assembleDirectory>target</assembleDirectory> <extraJvmArguments>-Xmx512m</extraJvmArguments> <programs> <program> <mainClass>Main</mainClass> <name>webapp</name> </program> </programs> </configuration> </execution> </executions> </plugin>
Finally, switch the packaging from war
to jar
. That's it for the pom.
Now that the application is ready to be self-hosted, create a simple Main
to
bootstrap Jetty and host the servlet.
Example 24.4. src/main/java/Main.java
import org.eclipse.jetty.server.Server; import org.eclipse.jetty.webapp.WebAppContext; public class Main { public static void main(String[] args) throws Exception { String webappDirLocation = "src/main/webapp/"; String webPort = System.getenv("PORT"); if(webPort == null || webPort.isEmpty()) { webPort = "8080"; } Server server = new Server(Integer.valueOf(webPort)); WebAppContext root = new WebAppContext(); root.setContextPath("/"); root.setDescriptor(webappDirLocation+"/WEB-INF/web.xml"); root.setResourceBase(webappDirLocation); root.setParentLoaderPriority(true); server.setHandler(root); server.start(); server.join(); } }
Notice the use of environment variable "PORT" for discovering which port to use. Heroku and the Neo4j Add-on use a number of environment variable to configure the application. Next, we'll modify the Spring application context to use the Neo4j variables for specifying the connection to Neo4j itself.
In the SDN Todos example, src/main/resources/META-INF/spring/applicationContext-graph.xml
was modified to look like this:
Example 24.5. Spring Data Neo4j REST configuration - applicationContext-graph.xml
<neo4j:config graphDatabaseService="graphDatabaseService"/> <bean id="graphDatabaseService" class="org.springframework.data.neo4j.rest.SpringRestGraphDatabase"> <constructor-arg index="0" value="${NEO4J_REST_URL}" /> <constructor-arg index="1" value="${NEO4J_LOGIN}" /> <constructor-arg index="2" value="${NEO4J_PASSWORD}" /> </bean>
Before provisioning at Heroku, test the application locally. First make sure you've got Neo4j server running locally, using default configuration. Then set the following environment variables:
Example 24.6. environment variables
export NEO4J_REST_URL=http://localhost:7474/db/data export NEO4J_LOGIN="" export NEO4J_PASSWORD=""
Now you can launch the app by running sh target/bin/webapp
. If running the SDN Todos
example, you can test it by running ./bin/todos list
. That should return an empty
JSON array, since no todos have been created yet.
For details about the todos
script, see the readme
included with the example.
With a self-hosted application ready, deploying to Heroku needs a few more steps. First,
create a Procfile
at the top-level of the project, which will contain a single
line identifying the command line which launches the application.
The contents of the Procfile
should contain:
Example 24.8. deploy to heroku
# Initialize a local git repository, adding all the project files git init git add . git commit -m "initial commit" # Provision a Heroku stack, add the Neo4j Add-on and deploy the appication heroku create --stack cedar heroku addons:add neo4j git push heroku master
![]() | Note |
---|---|
Note that the stack must be "cedar" to support running Java. Check that the process
is running by using |
For the SDN Todos application, you can try out the remote application using the -r
switch with the bin/todo
script like this:
Example 24.9. Session with todo script
./bin/todo -r mk "tweet thanks for the good work @mesirii @akollegger" ./bin/todo -r list
To see the Neo4j graph you just created through Heroku, use heroku config
to reveal
the NEO4J_URL
environment variable, which will take you to Neo4j's Webadmin.
Although adding layers of abstraction is a common pattern in software development, each of these layers generally adds overhead and performance penalties. This chapter discusses the performance implications of using Spring Data Neo4j instead of the Neo4j API directly.
The focus of Spring Data Neo4j is to add a convenience layer on top of the Neo4j API. This enables developers to get up and running with a graph database very quickly, having their domain objects mapped to the graph with very little work. Building on this foundation, one can later explore other, more efficient ways to explore and process the graph - if the performance requirements demand it.
Like with any other object mapping framework, the domain entities that are created, read, or persisted represent only a small fraction of the data stored in the database. This is the set needed for a certain use-case to be displayed, edited or processed in a low throughput fashion. The main advantages of using an object mapper in this case are the ease of use of real domain objects in your business logic and also the integration with existing frameworks and libraries that expect Java POJOs as input or create them as results.
Spring Data Neo4j, however, was not designed with a major focus on performance. It does add some overhead to pure graph operations.
Most of the overhead comes from the use of the Java Reflection API, which is used to provide information about annotations, fields and constructors. Some of the information is already cached by the JVM and the library infrastructure from Spring-Data-Commons, so that only the first access gets a performance penalty. Other reflection penalties like field or method access will occur all the time.
For the simple mapping it is important to be aware of the size graph of data that is pulled out of the
graph database in a single read and copied to domain entities. That's why Spring Data Neo4j loads
related data not by default. You have to provide an indicator (@Fetch
) to do so. Alternatively
the Neo4jTemplate.fetch
method offers means of of loading entities and collections of those.
For the advanced mapping mode keep in mind that any access of properties and relationships will in general read through down to the database. To avoid multiple reads, it is sensible to store the result in a local variable in suitable scope (e.g. method, class or jsp).
To evaluate if the performance of Spring Data Neo4j impacts a certain use-case it is sensible to define performance requirements and measure the actual time in realistic test scenarios for the use-case. Only if Spring Data Neo4j doesn't perform as fast as required it is recommended to drop down to the native Neo4j API.
The advanced mapping mode of Spring Data Neo4j relies heavily on AspectJ. AspectJ is a Java implementation of the aspect-oriented programming paradigm that allows easy extraction and controlled application of so-called cross-cutting concerns. Cross-cutting concerns are typically repetitive tasks in a system (e.g. logging, security, auditing, caching, transaction scoping) that are difficult to extract using the normal OO paradigms. Many OO concepts, such as subclassing, polymorphism, overriding and delegation are still cumbersome to use with many of those concerns applied in the code base. Also, the flexibility becomes limited, potentially adding quite a number of configuration options or parameters.
The AspectJ pointcut language can be intimidating, but a developer using Spring Data Neo4j will not have to deal with that. Users don't have care about hooking into a framework mechanism, or having to extend a framework superclass.
AspectJ uses a declarative approach, defining concrete "advice", which is just pieces of code that contain the implementation of the "concern", as it is called. An AspectJ advice can for instance be applied before, after, or instead of a method or constructor call. It can also be applied on variable and field access. This is declared using AspectJ's expressive pointcut language, which is able to express any place within a code structure or flow. AspectJ is also able to introduce new methods, fields, annotations, interfaces, and superclasses to existing classes.
Spring Data Neo4j uses a mix of these mechanisms internally. First, when encountering the
@NodeEntity
or @RelationshipEntity
annotations it introduces a new interface
NodeBacked
or RelationshipBacked
to the annotated class. Secondly, it introduces
fields and methods to the annotated class. See Section 20.12, “Active Record Methods for Advanced Mapping Mode”
for more information on the methods introduced.
Spring Data Neo4j also leverages AspectJ to intercept access to fields, delegating the calls to the graph database instead. Under the hood, properties and relationships will be created.
So how is an aspect applied to a concrete class? At compile time, the AspectJ Java compiler (ajc) takes source files and aspect definitions, and compiles the source files while adding all the necessary interception code for the aspects to hook in where they're declared to. This is known as compile-time weaving. At runtime only a small AspectJ runtime is needed, as the byte code of the classes has already been rewritten to delegate the appropriate calls via the declared advice in the aspects.
![]() | Note |
---|---|
A caveat of using compile-time weaving is that all source files that should be part of the weaving process must be compiled with the AspectJ compiler. Fortunately, this is all taken care of seamlessly by the AspectJ Maven plugin. |
AspectJ also supports other types of weaving, e.g. load-time weaving and runtime weaving. These are currently not supported by Spring Data Neo4j.
Neo4j is not only available in embedded mode. It can also be installed and run as a stand-alone server accessible via a REST API. Developers can integrate Spring Data Neo4j into the Neo4j server infrastructure in two ways: in an unmanaged server extension, or via the REST API.
When should you write a server extension? The default REST API is essentially a REST'ified representation of the Neo4j core API. It is nice for getting started, and for simpler scenarios. For more involved solutions that require high-volume access or more complex operations, writing a server extension that is able to process external parameters, do all the computations locally in the plugin, and then return just the relevant information to the calling client is preferable.
The Neo4j Server has two built-in extension mechanisms. It is possible to extend existing URI endpoints like the graph database, nodes, or relationships, adding new URIs or methods to those. This is achieved by writing a server plugin. This plugin type has some restrictions however.
For complete freedom in the implementation, an
unmanaged extension
can be used. Unmanaged extensions are essentially Jersey
resource implementations. The resource constructors or methods can get the
GraphDatabaseService
injected to execute the necessary operations and return appropriate
Representations
.
Both kinds of extensions have to be packaged as JAR files and added to the Neo4j Server's plugin
directory. Server Plugins are picked up by the server at startup if they provide the necessary
META-INF.services/org.neo4j.server.plugins.ServerPlugin
file for Java's ServiceLoader
facility. Unmanaged extensions have to be registered with the Neo4j Server configuration.
Example 27.1. Configuring an unmanaged extension
org.neo4j.server.thirdparty_jaxrs_classes=com.example.mypackage=/my-context
Running Spring Data Neo4j on the Neo4j Server is easy. You need to tell the server where to find the Spring context configuration file, and which beans from it to expose:
Example 27.2. Server plugin initialization
public class HelloWorldInitializer extends SpringPluginInitializer { public HelloWorldInitializer() { super(new String[]{"spring/helloWorldServer-Context.xml"}, Pair.of("worldRepository", WorldRepository.class), Pair.of("template", Neo4jTemplate.class)); } }
Now, your resources can require the Spring beans they need, annotated with @Context
like this:
Example 27.3. Jersey resource
@Path( "/path" ) @POST @Produces( MediaType.APPLICATION_JSON ) public void foo( @Context WorldRepository repo ) { ... }
The SpringPluginInitializer
merges the server provided GraphDatabaseService
with the Spring configuration
and registers the named beans as Jersey Injectables
. It is still necessary to list the
initializer's fully qualified class name in a file named
META-INF/services/org.neo4j.server.plugins.PluginLifecycle
. The Neo4j Server can then pick
up and run the initialization classes before the extensions are loaded.
To use REST-API the Neo4j Server exposes, one would either go with REST libraries on the lower level or choose one of the Neo4j related
REST drivers in various languages. For Java Neo4j provides the Neo4j Java REST bindings
which come as a drop in replacement for the GraphDatabaseService
API. Spring Data Neo4j REST uses those bindings to provide seamless
access to a remote Neo4j Database.
By simply configuring the graphDatabaseService
to be a SpringRestGraphDatabase
pointing to a Neo4j Server instance and
referring to that from <neo4j:config>
Spring Data Neo4j will use the server side database for both the simple mapping as
well as the advanced mapping.
![]() | Note |
---|---|
The Neo4j Server REST API does not allow for transactions to span across requests, which means
that Spring Data Neo4j is not transactional across multiple operations when running with a |
Please also keep in mind that performing graph operations via the REST-API is about one order of
magnitude slower than local operations. Try to use the Neo4j Cypher query language,
server-side traversals (RestTraversal
) or Gremlin expressions whenever possible for retrieving large sets of data.
Future versions of Spring Data Neo4j will use the more performant batch API as well as a binary protocol.
To set up your project to use the REST bindings, add this dependency to your pom.xml:
Example 27.4. REST-Client configuration - pom.xml
<dependency> <groupId>org.springframework.data</groupId> <artifactId>spring-data-neo4j-rest</artifactId> <version>2.1.0.RELEASE</version> </dependency>
Now, you set up the normal Spring Data Neo4j configuration, but point the database to an URL instead
of a local directory, like so:
Example 27.5. REST client configuration - application context
<neo4j:config graphDatabaseService="graphDatabaseService"/> <bean id="graphDatabaseService" class="org.springframework.data.neo4j.rest.SpringRestGraphDatabase"> <constructor-arg value="http://localhost:7474/db/data/" index="0"/> <!-- for running against a server requiring authentication <constructor-arg value="username" index="1"/> <constructor-arg value="password" index="2"/> --> </bean>
Your project is now set up to work against a remote Neo4j Server.
For traversals and Cypher and Gremlin graph queries it is sensible to forward those to the remote endpoint and execute them there
instead of walking the graph over the wire. SpringRestGraphDatabase already supports that by providing methods that forward
to the remote instance. (e.g. queryEngineFor(), index() and createTraversalDescription()
).
Please use those methods when interacting with a remote server for optimal performance. Those methods are also
used by the Neo4jTemplate and the mapping infrastructure automatically.