Typically, your repository interface will extend Repository, CrudRepository or PagingAndSortingRepository. Alternatively, if you do not want to extend Spring Data interfaces, you can also annotate your repository interface with @RepositoryDefinition. Extending CrudRepository exposes a complete set of methods to manipulate your entities. If you prefer to be selective about the methods being exposed, simply copy the ones you want to expose from CrudRepository into your domain repository.

In this first step you defined a common base interface for all your domain repositories and exposed findById(…) as well as save(…).These methods will be routed into the base repository implementation of the store of your choice provided by Spring Data ,e.g. in the case if JPA SimpleJpaRepository, because they are matching the method signatures in CrudRepository. So the UserRepository will now be able to save users, and find single ones by id, as well as triggering a query to find Users by their email address.

Using a unique Spring Data module in your application makes things simple hence, all repository interfaces in the defined scope are bound to the Spring Data module. Sometimes applications require using more than one Spring Data module. In such case, it’s required for a repository definition to distinguish between persistence technologies. Spring Data enters strict repository configuration mode because it detects multiple repository factories on the class path. Strict configuration requires details on the repository or the domain class to decide about Spring Data module binding for a repository definition:

Repository type details and identifying domain class annotations are used for strict repository configuration identify repository candidates for a particular Spring Data module. Using multiple persistence technology-specific annotations on the same domain type is possible to reuse domain types across multiple persistence technologies, but then Spring Data is no longer able to determine a unique module to bind the repository.

The last way to distinguish repositories is scoping repository base packages. Base packages define the starting points for scanning for repository interface definitions which implies to have repository definitions located in the appropriate packages. By default, annotation-driven configuration uses the package of the configuration class. The base package in XML-based configuration is mandatory.

The following strategies are available for the repository infrastructure to resolve the query. You can configure the strategy at the namespace through the query-lookup-strategy attribute in case of XML configuration or via the queryLookupStrategy attribute of the Enable${store}Repositories annotation in case of Java config. Some strategies may not be supported for particular datastores.

The query builder mechanism built into Spring Data repository infrastructure is useful for building constraining queries over entities of the repository. The mechanism strips the prefixes find…By, read…By, query…By, count…By, and get…By from the method and starts parsing the rest of it. The introducing clause can contain further expressions such as a Distinct to set a distinct flag on the query to be created. However, the first By acts as delimiter to indicate the start of the actual criteria. At a very basic level you can define conditions on entity properties and concatenate them with And and Or.

The actual result of parsing the method depends on the persistence store for which you create the query. However, there are some general things to notice.

Property expressions can refer only to a direct property of the managed entity, as shown in the preceding example. At query creation time you already make sure that the parsed property is a property of the managed domain class. However, you can also define constraints by traversing nested properties. Assume a Person has an Address with a ZipCode. In that case a method name of

creates the property traversal x.address.zipCode. The resolution algorithm starts with interpreting the entire part (AddressZipCode) as the property and checks the domain class for a property with that name (uncapitalized). If the algorithm succeeds it uses that property. If not, the algorithm splits up the source at the camel case parts from the right side into a head and a tail and tries to find the corresponding property, in our example, AddressZip and Code. If the algorithm finds a property with that head it takes the tail and continue building the tree down from there, splitting the tail up in the way just described. If the first split does not match, the algorithm move the split point to the left (Address, ZipCode) and continues.

Although this should work for most cases, it is possible for the algorithm to select the wrong property. Suppose the Person class has an addressZip property as well. The algorithm would match in the first split round already and essentially choose the wrong property and finally fail (as the type of addressZip probably has no code property).

To resolve this ambiguity you can use _ inside your method name to manually define traversal points. So our method name would end up like so:

As we treat underscore as a reserved character we strongly advise to follow standard Java naming conventions (i.e. not using underscores in property names but camel case instead).

To handle parameters in your query you simply define method parameters as already seen in the examples above. Besides that the infrastructure will recognize certain specific types like Pageable and Sort to apply pagination and sorting to your queries dynamically.

The first method allows you to pass an org.springframework.data.domain.Pageable instance to the query method to dynamically add paging to your statically defined query. A Page knows about the total number of elements and pages available. It does so by the infrastructure triggering a count query to calculate the overall number. As this might be expensive depending on the store used, Slice can be used as return instead. A Slice only knows about whether there’s a next Slice available which might be just sufficient when walking through a larger result set.

Sorting options are handled through the Pageable instance too. If you only need sorting, simply add an org.springframework.data.domain.Sort parameter to your method. As you also can see, simply returning a List is possible as well. In this case the additional metadata required to build the actual Page instance will not be created (which in turn means that the additional count query that would have been necessary not being issued) but rather simply restricts the query to look up only the given range of entities.

The results of query methods can be limited via the keywords first or top, which can be used interchangeably. An optional numeric value can be appended to top/first to specify the maximum result size to be returned. If the number is left out, a result size of 1 is assumed.

The limiting expressions also support the Distinct keyword. Also, for the queries limiting the result set to one instance, wrapping the result into an Optional is supported.

If pagination or slicing is applied to a limiting query pagination (and the calculation of the number of pages available) then it is applied within the limited result.

The results of query methods can be processed incrementally by using a Java 8 Stream<T> as return type. Instead of simply wrapping the query results in a Stream data store specific methods are used to perform the streaming.

Repository queries can be executed asynchronously using Spring’s asynchronous method execution capability. This means the method will return immediately upon invocation and the actual query execution will occur in a task that has been submitted to a Spring TaskExecutor.

Each Spring Data module includes a repositories element that allows you to simply define a base package that Spring scans for you.

In the preceding example, Spring is instructed to scan com.acme.repositories and all its sub-packages for interfaces extending Repository or one of its sub-interfaces. For each interface found, the infrastructure registers the persistence technology-specific FactoryBean to create the appropriate proxies that handle invocations of the query methods. Each bean is registered under a bean name that is derived from the interface name, so an interface of UserRepository would be registered under userRepository. The base-package attribute allows wildcards, so that you can define a pattern of scanned packages.

The repository infrastructure can also be triggered using a store-specific @Enable${store}Repositories annotation on a JavaConfig class. For an introduction into Java-based configuration of the Spring container, see the reference documentation.^[1]

A sample configuration to enable Spring Data repositories looks something like this.

You can also use the repository infrastructure outside of a Spring container, e.g. in CDI environments. You still need some Spring libraries in your classpath, but generally you can set up repositories programmatically as well. The Spring Data modules that provide repository support ship a persistence technology-specific RepositoryFactory that you can use as follows.

To enrich a repository with custom functionality, you first define a fragment interface and an implementation for the custom functionality. Then let your repository interface additionally extend from the fragment interface.

The implementation itself does not depend on Spring Data and can be a regular Spring bean. So you can use standard dependency injection behavior to inject references to other beans like a JdbcTemplate, take part in aspects, and so on.

Let your repository interface extend the fragment one. Doing so combines the CRUD and custom functionality and makes it available to clients.

Spring Data repositories are implemented by using fragments that form a repository composition. Fragments are the base repository, functional aspects such as QueryDsl and custom interfaces along with their implementation. Each time you add an interface to your repository interface, you enhance the composition by adding a fragment. The base repository and repository aspect implementations are provided by each Spring Data module.

Repositories may be composed of multiple custom implementations that are imported in the order of their declaration. Custom implementations have a higher priority than the base implementation and repository aspects. This ordering allows you to override base repository and aspect methods and resolves ambiguity if two fragments contribute the same method signature. Repository fragments are not limited to be used in a single repository interface. Multiple repositories may use a fragment interface to reuse customizations across different repositories.

The preceding approach requires customization of all repository interfaces when you want to customize the base repository behavior, so all repositories are affected. To change behavior for all repositories, you need to create an implementation that extends the persistence technology-specific repository base class. This class will then act as a custom base class for the repository proxies.

The final step is to make the Spring Data infrastructure aware of the customized repository base class. In JavaConfig this is achieved by using the repositoryBaseClass attribute of the @Enable…Repositories annotation:

A corresponding attribute is available in the XML namespace.

Querydsl is a framework which enables the construction of statically typed SQL-like queries via its fluent API.

Several Spring Data modules offer integration with Querydsl via QueryDslPredicateExecutor.

To make use of Querydsl support simply extend QueryDslPredicateExecutor on your repository interface.

The above enables to write typesafe queries using Querydsl Predicate s.

Spring Data modules ships with a variety of web support if the module supports the repository programming model. The web related stuff requires Spring MVC JARs on the classpath, some of them even provide integration with Spring HATEOAS ^[2]. In general, the integration support is enabled by using the @EnableSpringDataWebSupport annotation in your JavaConfig configuration class.

The @EnableSpringDataWebSupport annotation registers a few components we will discuss in a bit. It will also detect Spring HATEOAS on the classpath and register integration components for it as well if present.

Alternatively, if you are using XML configuration, register either SpringDataWebSupport or HateoasAwareSpringDataWebSupport as Spring beans:

If you work with the Spring JDBC module, you probably are familiar with the support to populate a DataSource using SQL scripts. A similar abstraction is available on the repositories level, although it does not use SQL as the data definition language because it must be store-independent. Thus the populators support XML (through Spring’s OXM abstraction) and JSON (through Jackson) to define data with which to populate the repositories.

Assume you have a file data.json with the following content:

You can easily populate your repositories by using the populator elements of the repository namespace provided in Spring Data Commons. To populate the preceding data to your PersonRepository , do the following:

This declaration causes the data.json file to be read and deserialized via a Jackson ObjectMapper.

The type to which the JSON object will be unmarshalled to will be determined by inspecting the _class attribute of the JSON document. The infrastructure will eventually select the appropriate repository to handle the object just deserialized.

To rather use XML to define the data the repositories shall be populated with, you can use the unmarshaller-populator element. You configure it to use one of the XML marshaller options Spring OXM provides you with. See the Spring reference documentation for details.

By default, SDN will use the BOLT driver to connect to Neo4j and you don’t need to declare it as a separate dependency in your pom. If you want to use the embedded or HTTP drivers in your production application, you must add the following dependencies as well. (This dependency on the embedded driver is not required if you only want to use the embedded driver for testing. See the section on Testing below for more information).

Gradle dependencies are basically the same as Maven:

SDN provides support for connecting to Neo4j using different drivers.

The following drivers are available.

To configure the Driver programmatically, create a Configuration bean and pass it as the first argument to the SessionFactory constructor in your Spring configuration:

Configuration can also be initialized from an external file like this.

Spring Boot 2.0 works straight out of the box with Spring Data Neo4j 5.0.0.

Update your Spring Boot Maven POM with the following. You may need to add <repositories> depending on versioning (when using milestone or snapshot versions).

Then add to your Spring Boot configuration class these annotations:

A Session is used to drive the object-graph mapping framework. All repository implementations are driven by the Session. It keeps track of the changes that have been made to entities and their relationships. The reason it does this is so that only entities and relationships that have changed get persisted on save, which is particularly efficient when working with large graphs.

Sessions are usually bound to a thread by default and rely on the garbage collector to clean it up once it is out of scope of processing. For most users this means there is nothing to configure. Request/response type applications SDN will take care of Session management for you (as defined in the Configuration section above). If you have a batch or long running desktop type application you may want to know how you can control using the session a bit more.

Most of the data access operations you usually trigger on a repository result a query being executed against the Neo4j database. Defining such a query is just a matter of declaring a method on the repository interface

Queries using the Cypher graph query language can be supplied with the @Query annotation.

That means a repository method annotated with
@Query("MATCH (:Actor {name:{name}})-[:ACTED_IN]->(m:Movie) return m")
will use the supplied query query to retrieve data from Neo4j.

The named or indexed parameter {param} will be substituted by the actual method parameter. Node and Relationship-Entities are handled directly and converted into their respective ids. All other parameters types are provided directly (i.e. Strings, Longs, etc).

There is special support for the Pageable parameter from Spring Data Commons, which is supported to add programmatic paging and slicing(alternatively static paging and sorting can be supplied in the query string itself).

If it is required that paged results return the correct total count, the @Query annotation can be supplied with a count query in the countQuery attribute. This query is executed separately after the result query and its result is used to populate the number of elements on the Page.

Typical results for queries are Iterable<Type>, Iterable<Map<String,Object>> or simply Type. Nodes and relationships are converted to their respective entities (if they exist). Other values are converted using the registered conversion services (e.g. enums).

Examples of Cypher queries placed on repository methods with @Query where values are replaced with method parameters, as described in the Annotated queries) section.

Using the metadata infrastructure in the underlying object-graph mapper, a finder method name can be split into its semantic parts and converted into a cypher query. Navigation along relationships will be reflected in the generated MATCH clause and properties with operators will end up as expressions in the WHERE clause. The parameters will be used in the order they appear in the method signature so they should align with the expressions stated in the method name.

For queries executed via @Query repository methods, it’s possible to specify a conversion of complex query results to POJOs. These result objects are then populated with the query result data and can be serialized and sent to a different part of the application, e.g. a frontend-ui. To take advantage of this feature, use a class annotated with @QueryResult as the method return type.

Spring Data Neo4j supports sorting and paging of results when using Spring Data’s Pageable and Sort interfaces.

Spring Data Repositories usually return the domain model when using query methods. However, sometimes, you may need to alter the view of that model for various reasons. In this section, you will learn how to define projections to serve up simplified and reduced views of resources.

Look at the following domain model:

This Cinema has several attributes:

Now assume we create a corresponding repository as follows:

Spring Data will return the domain object including all of its attributes, including all the users that visited this cinema. That can be a big amount of data and can lead to performance issues.

There are several ways to avoid that :

The CinemaNameAndBlockbuster projection only has getters for name and blockbusterOfTheWeek meaning that it will not serve up any user information. The query method definition returns in this case CinemaNameAndBlockbuster instead of Cinema.

Projections declare a contract between the underlying type and the method signatures related to the exposed properties. Hence it is required to name getter methods according to the property name of the underlying type. If the underlying property is named name, then the getter method must be named getName otherwise Spring Data is not able to look up the source property. This type of projection is also called closed projection.

The other type is, as you might imagine, an open projection.

You can start a read only transaction by marking a class or method with @Transactional(readOnly=true).

SDN provides the ability to bind the listener of an event to a phase of the transaction. The typical example is to handle the event when the transaction has completed successfully: this allows events to be used with more flexibility when the outcome of the current transaction actually matters to the listener.

Spring Framework is currently structured in such a way that the context is not aware of the transaction support and has an open infrastructure to allow additional components to be registered and influence the way event listeners are created.

The transaction module implements an EventListenerFactory that looks for the new @TransactionalEventListener annotation. When this one is present, an extended event listener that is aware of the transaction is registered instead of the default.

@TransactionalEventListener is a regular @EventListener and also exposes a TransactionPhase, the default being AFTER_COMMIT. You can also hook other phases of the transaction (BEFORE_COMMIT, AFTER_ROLLBACK and AFTER_COMPLETION that is just an alias for AFTER_COMMIT and AFTER_ROLLBACK).

By default, if no transaction is running the event isn’t sent at all as we can’t obviously honor the requested phase, but there is a fallbackExecution attribute in @TransactionalEventListener that tells Spring to invoke the listener immediately if there is no transaction.

To find out more about Spring’s Event listening capabilities see the Spring reference manual and How to build Transaction aware Eventing with Spring 4.2.

Neo4j causal clusters use bookmarks to manage read your own writes scenarios. You’ll find background information on the way causal clusters work in the Neo4j operations manual.

In SDN, you can use the bookmark management feature to handle these scenarios easily. You just need to add :

Every method annotated with @UseBookmark will then collect the bookmarks coming from the database at the end of transactions. These bookmarks are then stored into a SDN managed context, and reused on later calls to other @UseBookmark annotated methods.

Instances of the repository interfaces are usually created by a container, which Spring is the most natural choice when working with Spring Data. There’s sophisticated support to easily set up Spring to create bean instances documented in Creating repository instances. Spring Data Neo4j ships with a custom CDI extension that allows using the repository abstraction in CDI environments. The extension is part of the JAR so all you need to do to activate it is dropping the Spring Data Neo4j JAR into your classpath.

You can now set up the infrastructure by implementing a CDI Producer for the SessionFactory and Session:

The necessary setup can vary depending on the JavaEE environment you run in. It might also just be enough to redeclare a session as CDI bean as follows:

In this example, the container has to be capable of creating OGM Sessions itself. All the configuration does is re-exporting the OGM Session as CDI bean.

The Spring Data Neo4J CDI extension will pick up all sessions availables as CDI beans and create a proxy for a Spring Data repository whenever an bean of a repository type is requested by the container. Thus obtaining an instance of a Spring Data repository is a matter of declaring an @Injected property:

Spring Data Neo4J allows developers to use JSR-303 annotations like @NotNull etc. on their domain models. While this is provided it’s not a best practice. It is highly recommended to create JSR-303 annotations on actual Java Beans, similar to things like Data Transfer Objects (DTOs).

It is possible to have Spring Data Neo4j use converters registered with Spring’s ConversionService. In order to do this, provide org.springframework.data.neo4j.conversion.MetaDataDrivenConversionService as a Spring bean.

Then, instead of defining an implementation of org.neo4j.ogm.typeconversion.AttributeConverter on the @Convert annotation, use the graphPropertyType attribute to define the type to convert to.

Spring Data Neo4j will look for converters registered with Spring’s ConversionService that can convert both to and from the type specified by graphPropertyType and use them if they exist.

As of SDN 4, this Neo4jRepository<T, ID> should be the interface from which your entity repository interfaces inherit, with T being specified as the domain entity type to persist. ID is defined by the field type annotated with @Id.

Examples of methods you get for free out of Neo4jRepository are as follows. For all of these examples the ID parameter is a Long that matches the graph ID:

^* These versions are no longer actively developed or supported.

^# Not applicable to Embedded and HTTP drivers

The following table list transitive dependencies between specific versions of projects related to OGM. When reporting issues or asking for help on StackOverflow or neo4j-users slack channel always verify versions used (e.g through mvn dependency:tree) and report them as well.

In the <dependencies> section of your pom.xml add the following:

If you plan on using a development (i.e. SNAPSHOT) version of the OGM you will need to add the following to the <repositories> section of your pom.xml:

Ensure the following dependencies are added to you build.gradle:

If you plan on using a development (i.e. SNAPSHOT) version of the OGM you will need to add the following section of your build.gradle:

Properties file on classpath:

Properties file on filesystem:

In cases where you are not be able to provide configuration via a properties file you can configure the OGM programmatically instead.

The Configuration object provides a fluent API to set various configuration options. This object then needs to be supplied to the SessionFactory constructor in order to be configured.

Just configure the driver as you would do for direct access to the database, and pass the driver instance to the session factory.

This method allows the greatest flexibility and gives you access to the full range of low level configuration options.

Note that for the URI, if no port is specified, the default Bolt port of 7687 is used. Otherwise, a port can be specified with bolt://neo4j:password@localhost:1234.

Also, the bolt driver allows you to define a connection pool size, which refers to the maximum number of sessions per URL. This property is optional and defaults to 50.

A timeout to the database with the Bolt driver can be set by updating your Database’s neo4j.conf. The exact setting to change can be found here.

You should use the Embedded driver if you don’t want to use a client-server model, or if your application is running as a Neo4j Unmanaged Extension. You can specify a permanent data store location to provide durability of your data after your application shuts down, or you can use an impermanent data store, which will only exist while your application is running.

To use an impermanent data store which will be deleted on shutdown of the JVM, you just omit the URI attribute.

If you are using the HTTP or Bolt Driver you have a number of different ways to supply credentials to the Driver Configuration.

Note: Currently only Basic Authentication is supported by the OGM. If you need to use more advanced authentication scheme, use the native driver configuration method.

The Bolt and HTTP drivers also allow you to connect to Neo4j over a secure channel. These rely on Transport Layer Security (aka TLS/SSL) and require the installation of a signed certificate on the server.

In certain situations (e.g. some cloud environments) it may not be possible to install a signed certificate even though you still want to use an encrypted connection.

To support this, both drivers have configuration settings allowing you to bypass certificate checking, although they differ in their implementation.

In order to prevent some network problems while accessing a remote database, you may want to tell the Bolt driver to test connections from the connection pool.

This is particularly useful when there are firewalls between the application tier and the database.

You can do that with the connection liveness parameter which indicates the interval at which the connections will be tested. A value of 0 indicates that the connection will always be tested. A negative value that the connection will never always be tested.

OGM by default does not connect to Neo4j server on application startup. This allows you to start the application and database independently and Neo4j will be accessed on first read/write. To change this behaviour set the property verify.connection (or Builder.verifyConnection(boolean)) to true. This settings is valid only for Bolt and HTTP drivers.

A @Properties annotation tells OGM to map values of a Map field in a node or relationship entity to properties of a node or a relationship in the graph.

The property names are derived from field name or prefix, delimiter and keys in the Map. For example Map field with name address containing following entries:

will map to following node/relationship properties

Supported types for keys in the Map are String and Enum.

The values in the Map can be of any Java type equivalent to Cypher types. If full type information is provided other Java types are also supported.

If annotation parameter allowCast is set to true then types that can be cast to corresponding Cypher types are allowed as well.

As stated above, the label applied to a node is the contents of the @NodeEntity label property, or if not specified, it will default to the simple class name of the entity. Sometimes it might be necessary to add and remove additional labels to a node at runtime. We can do this using the @Labels annotation. Let’s provide a facility for adding additional labels to the Student entity:

Now, upon save, the node’s labels will correspond to the entity’s class hierarchy plus whatever the contents of the backing field are. We can use one @Labels field per class hierarchy - it should be exposed or hidden from sub-classes as appropriate.

Runtime labels must not conflict with static labels defined on node entities.

In some cases, you want to model two different aspects of a conceptual relationship using the same relationship type. Here is a canonical example:

This will work just fine, however, please be aware that this is only because the end node types (Car and Pet) are different types. If you wanted a person to own two cars, for example, then you’d have to use a Collection of cars or use differently-named relationship types.

In cases where the relationship mappings could be ambiguous, the recommendation is that:

Examples of ambiguous relationship mappings are multiple relationship types that resolve to the same types of entities, in a given direction, but whose domain objects are not navigable in both directions.

Neo4j doesn’t have any ordering on relationships, so the relationships are fetched without any specific ordering. If you want to impose order on collections of relationships you have several options:

You can sort either by a property of a related node or by relationship property. To sort by relationship property you need to use a relationship entity. See @RelationshipEntity: Rich relationships.

Entity equality can be a grey area. There are many debatable issues, such as whether natural keys or database identifiers best describe equality and the effects of versioning over time. Neo4j OGM does not impose a dependency upon a particular style of equals() or hashCode() implementation. The graph-id field is directly checked to see if two entities represent the same node and a 64-bit hash code is used for dirty checking, so you’re not forced to write your code in a certain way!

If the @Id annotation is used on its own it is expected that the field will be set by the application code. To automatically generate and assign a value of the property the annotation @GeneratedValue can be used.

The @GeneratedValue annotation has optional parameter strategy, which can be used to provide a custom id generation strategy. The class must implement org.neo4j.ogm.id.IdStrategy interface. The stragety class can either supply no argument constructor - in which case OGM will create an instance of the strategy and call it. For situations where some external context is needed an externally created instance can be registered with SessionFactory by using SessionFactory.register(IdStrategy).

As mentioned previously, save(entity) is overloaded as save(entity, depth), where depth dictates the number of related entities to save starting from the given entity. The default depth, -1, will persist properties of the specified entity as well as every modified entity in the object graph reachable from it. This means that all affected objects in the entity model that are reachable from the root object being persisted will be modified in the graph. This is the recommended approach because it means you can persist all your changes in one request. The OGM is able to detect which objects and relationships require changing, so you won’t flood Neo4j with a bunch of objects that don’t require modification. You can change the persistence depth to any value, but you should not make it less than the value used to load the corresponding data or you run the risk of not having changes you expect to be made actually being persisted in the graph. A depth of 0 will persist only the properties of the specified entity to the database.

Specifying the save depth is handy when it comes to dealing with complex collections, that could potentially be very expensive to load.

Neither the actor nor the movie has been assigned a node in the graph. If we were to call session.save(movie), then the OGM would first create a node for the movie. It would then note that there is a relationship to an actor, so it would save the actor in a cascading fashion. Once the actor has been persisted, it will create the relationship from the movie to the actor. All of this will be done atomically in one transaction.

The important thing to note here is that if session.save(actor) is called instead, then only the actor will be persisted. The reason for this is that the actor entity knows nothing about the movie entity - it is the movie entity that has the reference to the actor. Also note that this behaviour is not dependent on any configured relationship direction on the annotations. It is a matter of Java references and is not related to the data model in the database.

In the following example, the actor and the movie are both managed entities, having both been previously persisted to the graph:

In the example below, session.save(user,1) will persist all modified objects reachable from user up to one level deep. This includes posts and groups but not entities related to them, namely author, comments, members or location. A persistence depth of 0 i.e. session.save(user,0) will save only the properties on the user, ignoring any related entities. In this case, fullName is persisted but not friends, posts or groups.

By default, loading an instance will map that object’s simple properties and its immediately-related objects (i.e. depth = 1). This helps to avoid accidentally loading the entire graph into memory, but allows a single request to fetch not only the object of immediate interest, but also its closest neighbours, which are likely also to be of interest. This strategy attempts to strike a balance between loading too much of the graph into memory and having to make repeated requests for data.

If parts of your graph structure are deep and not broad (for example a linked-list), you can increase the load horizon for those nodes accordingly. Finally, if your graph will fit into memory, and you’d like to load it all in one go, you can set the depth to -1.

On the other hand when fetching structures which are potentially very "bushy" (e.g. lists of things that themselves have many relationships), you may want to set the load horizon to 0 (depth = 0) to avoid loading thousands of objects most of which you won’t actually inspect.

When OGM loads entities through load* methods (including ones with filters) it uses LoadStrategy to generate the RETURN part of the query.

Available load strategies are

The strategy can be overridden globally by calling SessionFactory.setLoadStrategy(strategy) or for single session only (e.g. when different strategy is more effective for given query) by calling Session.setLoadStrategy(strategy)

Cypher is Neo4j’s powerful query language. It is understood by all the different drivers in the OGM which means that your application code should run identically, whichever driver you choose to use. This makes application development much easier: you can use the Embedded Driver for your integration tests, and then plug in the HTTP Driver or the Bolt Driver when deploying your code into a production client-server environment.

The Session also allows execution of arbitrary Cypher queries via its query, queryForObject and queryForObjects methods. Cypher queries that return tabular results should be passed into the query method which returns an Result. This consists of QueryStatistics representing statistics of modifying cypher statements if applicable, and an Iterable<Map<String,Object>> containing the raw data, which can be either used as-is or converted into a richer type if needed. The keys in each Map correspond to the names listed in the return clause of the executed Cypher query.

queryForObject specifically queries for entities and as such, queries supplied to this method must return nodes and not individual properties.

Neo4j OGM supports Sorting and Paging of results when using the Session object. The Session object methods take independent arguments for Sorting and Pagination

Not cluster specific side note: you may also want to configure connection testing.

To use clustering, simply configure your Bolt URI to use the bolt routing protocol:

In this section we go through important points to be aware of when using causal clustering.

Hardware, and particularly network, can have a great impact on cluster stability. The deployment scenario also plays a critical role. It has to be carefully chosen, each configuration having it strengths and weaknesses.

Please read carefully the causal cluster reference to plan the best topology according to your needs.

You can also provide additional core instances in URIS property, separated by a comma. The URI property still needs to be set and will be tried first, followed by entries from URIS property. Same credentials are used for all instances. All listed instances must be core servers.

By default all Session 's Transaction s are set to read/write. This means reads and writes will always hit the core cluster. To offload the core servers and improve performance, it is advised if possible to route traffic to the replica servers. This is done in the application code, by declaring sessions / transactions as read-only. You can call session.beginTransaction(Transaction.Type) with READ to do that.

Causal consistency allows you to specify guarantees around query ordering, including the ability to read your own writes, view the last data you read, and later on, committed writes from other users. The Bolt drivers collaborate with the core servers to ensure that all transactions are applied in the same order using a concept of a bookmark.

The cluster returns a bookmark when it commits an update transaction, so then the driver links a bookmark to the user’s next transaction. The server that received query starts this new bookmarked transaction only when its internal state reached the desired bookmark. This ensures that the view of related data is always consistent, that all servers are eventually updated, and that users reading and re-reading data always see the same — and the latest — data.

If you have multiple application tier JVM instances you will need to manage this state across them. The Session object allows you to retrieve bookmarks through the use of Session.getLastBookmark() and start new transactions with given bookmark through Session.beginTransaction(type, bookmarks).

The driver does its best to ensure a stable communication between the application tier and the database. It handles low level failures (like connection loss), but cannot do much about higher level failures (like cluster unavailability). However, due to the nature of distributed platforms, failures arise. When the cluster is split among several datacenters, network issues can cause cluster instability. Cluster members not being able to talk to each other can make the cluster, for example, fall in read only mode, or trigger leader re-election.

For critical applications, these failures have to be anticipated, and also managed at the architecture or application level. Even if the driver handles some low level retries, it is not always enough in case of instability, as an application may involve complex business logic, and require coarse grained units of work.

Solutions like application retries or message queuing are good candidates to handle this kind of scenario.

When operating in HA mode, Neo4j does not make open transactions available across all nodes in the cluster. This means we must bind every request within a specific transaction to the same node in the cluster, or the commit will fail with 404 Not Found.

As of Version 2.0.5 read-only transactions are supported by the OGM.

In the Neo4j HA architecture, a cluster is typically fronted by a load balancer.

The following example shows how to configure your application and set up HAProxy as a load balancer to route write requests to whichever machine in the cluster is currently identified as the master, with read requests being distributed to any available machine in the cluster on a round-robin basis.

This configuration will also ensure that requests against a specific transaction are directed to the server where the transaction was created.

Because the Neo4j Object Graph Mapper can be used independently of Spring Data Neo4j, the core annotations have been moved out of the spring framework packages:

org.springframework.data.neo4j.annotation → org.neo4j.ogm.annotation

There have been some changes to the annotations that were used in previous versions of Spring Data Neo4j. Wherever possible we have tried to maintain the previous annotations verbatim, but in a few cases this has not been possible, usually for technical reasons but sometimes for aesthetic ones. Our goal has been to minimise the number of annotations you need to use as well as trying to make them more self-explanatory. The following annotations have been changed.

SDN provides automatic type conversion for the obvious candidates: byte[] and Byte[] arrays, Dates, BigDecimal and BigInteger types. In order to define bespoke type conversions for particular entity attribute, you can annotate a field or method with @Convert to specify your own implementation of org.neo4j.ogm.typeconversion.AttributeConverter.

You can find out more about type conversions here: Custom Converters

The default Date converter is @DateString.

SDN 3.x and earlier represented Dates as a String value consisting of the number of milliseconds since January 1, 1970, 00:00:00 GMT.

If you are upgrading to SDN 4.x from these versions and your application used the default, then you need to annotate your Date properties with @DateLong. Moreover, the property values in the graph need to be converted to numbers.

However, if your application already represented Dates as @GraphProperty(propertyType = Long.class) then simply changing this to @DateLong is sufficient.

The best way to retrieve start nodes for traversals and queries is by using Neo4j’s integrated index facilities. SDN supports Index and Constraint management but differs in how it does this to previous versions.

The following annotations are no longer used, either because they are no longer needed, or cannot be supported via Cypher.

Some features of the previous annotations have been dropped.

It is highly recommended for users starting new SDN projects to use the OGM Session directly. Neo4jTemplate has been kept to give upgrading users a better experience.

The Neo4jTemplate has been slimmed-down significantly for SDN 4. It contains the exact same methods as Session. In fact Neo4jTemplate is just a very thin wrapper with an ability to support SDN Exception Translation. Many of the operations are no longer needed or can be expressed with a straightforward Cypher query.

If you do use Neo4jTemplate, then you should code against its Neo4jOperations interface instead of the template class.

The following table shows the Neo4jTemplate functions that have been retained for version 4 of Spring Data Neo4j. In some cases the method names have changed but the same functionality is offered under the new version.

To achieve the old template.fetch(entity) equivalent behaviour, you should call one of the load methods specifying the fetch depth as a parameter.

It’s also worth noting that exec(GraphCallback) and the create…​() methods have been made obsolete by Cypher. Instead, you should now issue a Cypher query to the new execute method to create the nodes or relationships that you need.

Dynamic labels, properties and relationship types are not supported as of this version, server extensions should be considered instead.