Spring BlazeDS Integration Reference Guide


Jeremy Grelle

Version 1.5.0.M2

Copies of this document may be made for your own use and for distribution to others, provided that you do not charge any fee for such copies and further provided that each copy contains this Copyright Notice, whether distributed in print or electronically.

February 2011

1. Spring BlazeDS Integration Overview
1.1. Background
1.2. Minimum major dependency versions Spring BlazeDS Integration 1.5 requires to run
1.3. Minimum major dependency versions required by optional features
1.4. Where to get support
2. Configuring and Using the BlazeDS MessageBroker with Spring
2.1. Introduction
2.2. Configuring the Spring DispatcherServlet
2.3. Configuring the MessageBroker in Spring
2.4. Mapping Requests to the MessageBroker
2.5. Using Flex clients alongside Spring MVC Controllers
2.6. Using Spring-managed Destinations from the Flex Client
2.7. Advanced MessageBroker Customization
2.8. Using Custom Exception Translators
2.9. Using Custom Message Interceptors
2.9.1. Resource Handling with Custom Message Interceptors
2.9.2. Customizing the Message Interceptor Chain
2.10. Providing Custom Service Adapters
3. Exporting Spring Beans for Flex Remoting
3.1. Introduction
3.2. Configuring the Remoting Service
3.3. Using the remoting-destination Tag
3.4. Exporting Beans for Remoting with @RemotingDestination
3.4.1. Supplying Externalized Channel Ids
4. Communicating with RESTful Spring MVC Endpoints using AMF
4.1. Introduction
5. Working with Hibernate
5.1. Introduction
5.1.1. Configuring Hibernate Entity Serialization/Deserialization Support
5.1.2. Using Direct Field Mapping
5.1.3. Providing Custom Converters for Hibernate Entity Serialization/Deserialization
6. Securing BlazeDS Destinations with Spring Security
6.1. Introduction
6.1.1. A simple Spring Security 3 configuration
6.1.2. Enabling the Spring Security filter chain in web.xml
6.2. Configuring the Spring Security Integration
6.2.1. Using a Custom LoginCommand
6.2.2. Accessing User Details
6.2.3. Security Exception Translation
6.2.4. secured Configuration Attributes
6.3. Configuring Endpoint and Destination Security
6.3.1. Securing Specific BlazeDS Channels
6.3.2. Securing BlazeDS Channels by Endpoint URL Path
6.3.3. Securing Exported Spring Services
7. Integration with the BlazeDS Message Service
7.1. Introduction
7.2. Configuring the Message Service
7.3. Using AMF Message Destinations
7.4. Using JMS Message Destinations
7.5. Using Spring Integration Message Destinations
7.6. Sending AMF Messages with the MessageTemplate
8. Building and Running the Spring BlazeDS Integration Samples
8.1. Introduction
8.1.1. Maven Setup
8.1.2. Building and Running the Test Drive
8.1.3. Using BlazeDS 4 with Maven
8.1.4. Download the Pre-packaged Test Drive
8.1.5. Importing and Running the Test Drive in Eclipse
9. Working with the Flex Addon for Spring Roo
9.1. Introduction
9.1.1. Minimum Requirements for the Flex Addon for Spring Roo
9.1.2. Installing the Flex Addon for Spring Roo
9.1.3. Flex Addon for Spring Roo Features
9.1.4. Flex Commands flex setup flex remoting scaffold flex remoting all
9.1.5. Building and Running a Flex Addon Project Building and Running a Flex Addon Project with Maven Importing a Flex Addon Project into SpringSource Tool Suite and Flash Builder
9.1.6. Running the Sample Roo Script
9.1.7. Known Issues

Chapter 1. Spring BlazeDS Integration Overview

1.1. Background

Spring has always aimed to be agnostic to the client technologies being used to access its core services, intentionally leaving options open and letting the community drive the demand for any new first-class integration solutions to be added to the Spring project portfolio. Spring BlazeDS Integration is an answer to the commmunity demand for a top-level solution for building Spring-powered Rich Internet Applications using Adobe Flex for the client-side technology.

BlazeDS is an open source project from Adobe that provides the remoting and messaging foundation for connecting a Flex-based front-end to Java back-end services. Though it has previously been possible to use BlazeDS to connect to Spring-managed services, it has not been in a way that feels "natural" to a Spring developer, requiring the extra burden of having to maintain a separate BlazeDS xml configuration. Spring BlazeDS Integration turns the tables by making the BlazeDS MessageBroker a Spring-managed object, opening up the pathways to a more extensive integration that follows "the Spring way".

1.2. Minimum major dependency versions Spring BlazeDS Integration 1.5 requires to run

Java 5

Spring 3.0

Adobe BlazeDS 4.0

1.3. Minimum major dependency versions required by optional features

Spring Security 3.0

Spring Integration 2.0

Hibernate 3.5

Spring Roo 1.1 M1

1.4. Where to get support

Professional from-the-source support on Spring BlazeDS Integration is available from SpringSource, the company behind Spring.

Chapter 2. Configuring and Using the BlazeDS MessageBroker with Spring

2.1. Introduction

The central component that must be configured to use Spring BlazeDS Integration is the MessageBroker. HTTP messages from the Flex client will be routed through the Spring DispatcherServlet to the Spring-managed MessageBroker. There is no need to configure the BlazeDS MessageBrokerServlet when using the Spring-managed MessageBroker.

2.2. Configuring the Spring DispatcherServlet

The DispatcherServlet must be configured as normal in web.xml to bootstrap a Spring WebApplicationContext. For example:

<!-- The front controller of this Spring Web application, responsible for handling all application requests -->
    <servlet-name>Spring MVC Dispatcher Servlet</servlet-name>

2.3. Configuring the MessageBroker in Spring

A simplified Spring XML config namespace is provided for configuring the MessageBroker in your WebApplicationContext. To use the namespace support you must add the schema location in your Spring XML config files. A typical config will look something like the following:

<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"

This makes the Spring BlazeDS Integration configuration tags available under the flex namespace in your configuration files. The above setup will be assumed for the rest of the configuration examples to follow. For the full detail of every attribute and tag available in the config namespace, be sure to refer to the spring-flex-1.0.xsd as every element and attribute is fully documented there. Using an XSD-aware XML editor such as the one in Eclipse should bring up the documentation automatically as you type.

At a minimum, the MessageBrokerFactoryBean must be configured as a bean in your Spring WebApplicationContext in order to bootstrap the MessageBroker, along with a MessageBrokerHandlerAdapter and an appropriate HandlerMapping (usually a SimpleUrlHandlerMapping) to route incoming requests to the Spring-managed MessageBroker.

These beans will be registered automatically by using the provided message-broker tag in your bean definition file. For example, in its simplest form:


This will set up the MessageBroker and necessary supporting infrastructure using sensible defaults. The defaults can be overriden using the provided attributes of the message-broker tag and its associated child elements. For example, the default location of the BlazeDS XML configuration file (/WEB-INF/flex/services-config.xml) can be overridden using the services-config-path attribute. The MessageBrokerFactoryBean uses Spring's ResourceLoader abstraction, so that typical Spring resource paths may be used. For example, to load the configuration from the application's classpath:

<flex:message-broker services-config-path="classpath*:services-config.xml"    	

The equivalent MessageBrokerFactoryBean definition using vanilla Spring configuration would be:

<!-- Bootstraps and exposes the BlazeDS MessageBroker -->
<bean id="_messageBroker" class="org.springframework.flex.core.MessageBrokerFactoryBean" >
	<property name="servicesConfigPath" value="classpath*:services-config.xml" />

Note especially that with the message-broker tag, it is not necessary to assign a custom id to the MessageBroker, and it is in fact discouraged so that you won't have to continually reference it later. The only reason you would ever need to provide a custom id is if you were bootstrapping more than one MessageBroker in the same WebApplicationContext.

2.4. Mapping Requests to the MessageBroker

To properly route incoming requests to the Spring-managed MessageBroker, request mapping must be configured in three places:

  1. DispatcherServlet mapping in web.xml

  2. HandlerMapping in the Spring WebApplicationContext

  3. Channel definitions in the BlazeDS services-config.xml

The simplest request mapping scenario is when the Flex front-end is the only client type for the application. In this case you can just map /messagebroker as the top-level path for requests. The mapping in web.xml would be:

<!-- Map all /messagbroker requests to the DispatcherServlet for handling -->
    <servlet-name>Spring MVC Dispatcher Servlet</servlet-name>

When using the message-broker config tag, a SimpleUrlHandlerMapping is installed that by default maps all incoming DispatcherServlet requests to the Spring-managed MessageBroker using a /*path pattern. The default mapping can be overridden by providing one or more mapping child elements. If you want to provide your own HandlerMapping bean configuration, you can disable the default using the disable-default-mapping attribute of the message-broker tag. The order of the installed SimpleUrlHandlerMapping can be set (for complex scenarios where multiple handler mapping types are installed in the same context) using the mapping-order attribute.

The SimpleUrlHandlerMapping in the Spring WebApplicationContext maps all requests to the Spring-managed MessageBroker via the MessageBrokerHandlerAdapter. The default setup installed by the message-broker config tag is equivalent to the following bean definitions:

<!-- Maps request paths at /* to the BlazeDS MessageBroker -->
<bean class="org.springframework.web.servlet.handler.SimpleUrlHandlerMapping">
    <property name="mappings">

<!-- Dispatches requests mapped to a MessageBroker -->
<bean class="org.springframework.flex.servlet.MessageBrokerHandlerAdapter"/>    

Channel definitions in the BlazeDS services-config.xml must correspond to the chosen mapping. For example, to set up a typical AMF channel in BlazeDS that matches the above mapping strategy:

<channel-definition id="my-amf" class="mx.messaging.channels.AMFChannel">
    <endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/amf" 

See the BlazeDS documentation for more information on configuring communication channels in services-config.xml.

2.5. Using Flex clients alongside Spring MVC Controllers

It could often be the case that your application needs to serve more than just Flex-based clients. For example, you may be constructing a RESTful architecture that is meant to serve multiple client-types. You could potentially even be consuming RESTful endpoints using the Flex HTTPService component. Spring MVC's controller model provides a simple, flexible means to create such RESTful endpoints. In these sorts of hybrid web application secenarios, you will need to consider an alternate mapping strategy.

The simplest approach is to use a hierarchical application context with multiple DispatcherServlets. In this approach, you configure your main application layer (services, security, supporting infrastructure, etc) in a parent context loaded via the ContextLoaderListener, and then configure all aspects of your Spring MVC controllers in one child DispatcherServlet context, and all aspects specific to your Flex client in a separate child DispatcherServlet context. This approach could look as follows in web.xml:







Here the parent application context is being assembled from a group of files ending in -context.xml contained in the /WEB-INF/spring/ directory. The child context for the Flex-specific setup would be built (by convention) from /WEB-INF/flex-servlet.xml, and the context for the Spring MVC controllers would be built from /WEB-INF/spring-mvc-servlet.xml. This approach provides a nice separation of concerns and will allow Spring 2.5+ annotated controllers to work using their default configuration.

An alternate approach is to keep things consolidated under one DispatcherServlet context. The down-side to this approach is that it requires some additional manual configuration, and you have to modify your mapping approach accordingly, such as mapping /spring/* to the DispatcherServlet, mapping /messagebroker/* to the Spring-managed MessageBroker via the mapping XML namespace config tag, and modifying any BlazeDS channel definitions accordingly. You would override the default mapping strategy of the message-broker tag as follows:

    <flex:mapping pattern="/messagebroker/*" />

and you would have to account for the /spring/* mapping in your BlazeDS channel definitions. For example:

<channel-definition id="my-amf" class="mx.messaging.channels.AMFChannel">
    <endpoint url="http://{server.name}:{server.port}/{context.root}/spring/messagebroker/amf" 

In addition to setting up the consolidated mapping strategy, you will also have to manually enable the correct HandlerMapping and HandlerAdapter for your Spring MVC controllers as described in the Spring MVC documentation, due to the fact that alternate HandlerMapping and HandlerAdapter beans are configured automatically when using the message-broker tag.

2.6. Using Spring-managed Destinations from the Flex Client

Explicit channel definition is a requirement when using dynamic destinations (meaning any destination that is added programmatically and not defined in the BlazeDS services-config.xml, i.e. the destinations created by the remoting-destination tag and the various *-message-destination tags). See Adobe's documentation for more detail.

The only way you don't have to explicitly define the ChannelSet on the client is if

  1. you are using explicitly defined destinations in services-config.xml (i.e, not dynamic destinations) AND you compile your flex client against that file

  2. your destination is using the application-wide default channel AND you compile your flex client against that file

Even if you weren't using dynamically created destinations it is debatable whether it is a good idea to ever compile your client against services-config.xml, thus coupling your client to your server configuration. It is often desirable to keep your flex client and your server side code as two distinct modules, but compiling against services-config.xml blurs the lines between those modules.

Our recommendation is that it is generally cleaner to keep the client-side configuration of ChannelSets explicitly contained within the client module. An excellent way to do this without having to hard-code the URLs in your client code is to use an ActionScript DI framework such as Spring ActionScript (a Spring Extensions project, formerly known as Prana).

If you choose to go the route of compiling your client against services-config.xml, note that you can at least keep the URL information out of the client code by using ServerConfig.getChannel as described in the referenced BlazeDS documentation.

2.7. Advanced MessageBroker Customization

The initialization of the MessageBroker by the MessageBrokerFactoryBean logically consists of two phases:

  1. Parsing the BlazeDS XML configuration files and applying their settings to a newly created MessageBroker

  2. Starting the MessageBroker and its services

A special MessageBrokerConfigProcessor callback interface is provided that allows custom processing to be done on the newly created MessageBroker after each phase, before it is made available for request processing. This interface is used internally by Spring BlazeDS Integration, but is also available for general use in advanced programmatic introspection and customization of the MessageBroker. A custom MessageBrokerConfigProcessor can be configured as a Spring bean and then registered with the MessageBrokerFactoryBean via the config-processor tag. For example, given a trivial implementation to log some additional info about the MessageBroker:

package com.example;

import org.springframework.flex.config.MessageBrokerConfigProcessor;

import flex.messaging.MessageBroker;
import flex.messaging.services.RemotingService;

public class MyDestinationCountingConfigProcessor implements MessageBrokerConfigProcessor {

	public MessageBroker processAfterStartup(MessageBroker broker) {
		RemotingService remotingService = 
			(RemotingService) broker.getServiceByType(RemotingService.class.getName());
		if (remotingService.isStarted()) {
			System.out.println("The Remoting Service has been started with "
					+remotingService.getDestinations().size()+" Destinations.");
		return broker;

	public MessageBroker processBeforeStartup(MessageBroker broker) {
		return broker;

This class could be configured and registered with the MessageBroker as follows:

	<flex:config-processor ref="myConfigProcessor" />

<bean id="myConfigProcessor" class="com.example.MyDestinationCountingConfigProcessor" />

2.8. Using Custom Exception Translators

In order to propagate useful information back to the Flex client when an exception occurs on the server, the original exception must be translated into an instance of flex.messaging.MessageException. If special translation logic is not applied, a generic "Server.Processing" error will propagate to the client that doesn't give the client the chance to reason on the real cause of the error to take appropriate action. Special exception translators are configured by default for transforming Spring Security exceptions into an appropriate MessageException, but it could also be useful to provide custom translation for your own application-level exceptions.

Custom exception translation logic can be provided through implementations of the org.springframework.flex.core.ExceptionTranslator interface. These implementations must be configured as Spring beans and then registered through the XML configuration namespace as follows:

<!-- Custom exception translator configured as a Spring bean -->
<bean id="myExceptionTranslator" class="com.foo.app.MyBusinessExceptionTranslator"/>

	<flex:exception-translator ref="myExceptionTranslator"/>

2.9. Using Custom Message Interceptors

Custom message interceptors may be used to apply special processing logic to incoming and outgoing AMF messages in their de-serialized Java form. For example, an interceptor can be used to inspect the contents of the incoming message, or to add extra information to the outgoing message.

Custom message processing logic is provided through implementations of the org.springframework.flex.core.MessageInterceptor interface. These implementations must be configured as Spring beans and then registered through the XML configuration namespace as follows:

<!-- Custom message interceptor configured as a Spring bean -->
<bean id="myMessageInterceptor" class="com.foo.app.MyMessageInterceptor"/>

	<flex:message-interceptor ref="myMessageInterceptor"/>

2.9.1. Resource Handling with Custom Message Interceptors

For housekeeping purposes, an additional org.springframework.flex.core.ResourceHandlingMessageInterceptor interface is available to use. Interceptors that implement this extended interface receive an additional guaranteed callback after message processing is completed, whether processing was successful or failed due to an exception being thrown by the Endpoint. This allows the interceptor to clean up any resources that it may have been using. This interface extends the basic MessageInterceptor interface, thus it is configured the same way using the message-interceptor tag.

2.9.2. Customizing the Message Interceptor Chain

The framework installs a number of predefined MessageInterceptors that are automatically configured through the use of the configuration namespace. These interceptors are configured in a specific order, and any custom interceptors are by default added to the beginning of the chain, in the order that their message-interceptor elements appear. It is possible to specify an explicit order via the position, before, and after attributes. The position attribute allows the user to *override* the framework-supplied interceptor at that position, or to simply specify that the interceptor should be at the beginning or end of the chain by using the FIRST and LAST values respectively. The before and after attributes allow specifying position *relative to* the framework-supplied filters.

The ordering and implementation of the framework-supplied filters is shown in the table below.

Table 2.1. Standard Interceptor Aliases and Ordering

AliasMessageInterceptor ClassNamespace Element or Attribute
PER_CLIENT_AUTH_INTERCEPTOR PerClientAuthenticationInterceptor message-broker/[email protected]
LOGIN_MESSAGE_INTERCEPTOR LoginMessageInterceptor message-broker/secured
ENDPOINT_INTERCEPTOR EndpointInterceptor message-broker/secured/secured-endpoint-path or message-broker/secured/secured-channel

2.10. Providing Custom Service Adapters

Using the XML config namespace automatically installs the needed implementations of flex.messaging.services.ServiceAdapter for use with the Remoting and Message services. Third-party adapters (such as those provided by the dpHibernate or Gilead projects) can be configured using the org.springframework.flex.core.ManageableComponentFactoryBean. This factory bean implementation is able to process arbitrarily complex configuration metadata supplied in JSON format (instead of arbitrarily complex XML as in the native BlazeDS configuration) and honors the lifecycle semantics (such as proper invocation of the initialize method) of the ManageableComponent. These custom adapters may be used by Spring-managed Remoting and Message destinations by either setting its id as the default for the Remoting or Message service, or by setting the service-adapter attribute for a specific destination (see the Remoting and Messaging chapters for further detail).

For example, to use the special adapter provided by dpHibernate as the default adapter with the Remoting service, the configuration would be similar to the following:

<bean id="hibernate-object" class="org.springframework.flex.core.ManageableComponentFactoryBean">
<constructor-arg value="net.digitalprimates.persistence.hibernate.HibernateAdapter"/>
    <property name="properties">
            {"hibernate" :
                {"sessionFactory" :
                    { "class" : "net.digitalprimates.persistence.hibernate.utils.HibernateUtil",
                      "getCurrentSessionMethod" : "getCurrentSession"

	<flex:remoting-service default-adapter-id="hibernate-object" />

Chapter 3. Exporting Spring Beans for Flex Remoting

3.1. Introduction

Using a Spring-managed MessageBroker enables Spring beans to be easily exported for direct remoting calls from a Flex client. This approach is quite similar to that taken with other remoting technologies in the core Spring Framework. Remoting is applied to existing Spring-managed beans as an external configuration concern. The MessageBroker transparently handles the process of serialization and deserialization between the Flex AMF data format and Java.

3.2. Configuring the Remoting Service

The BlazeDS RemotingService has traditionally been configured by the inclusion of a remoting-config.xml file in the BlazeDS XML configuration. When using only Spring-managed remoting destinations, this config file can be left out completely as the inclusion of the message-broker tag in your Spring configuration will cause the RemotingService to be configured with sensible defaults if none already exists at startup time. The end result is essentially equivalent to including the following minimal remoting-config.xml in your BlazeDS configuration:

<?xml version="1.0" encoding="UTF-8"?>
<service id="remoting-service"

        <adapter-definition id="java-object" 

        <channel ref="my-amf"/>

Note that this assumes that there is already an equivalent application-wide default-channels configuration. It is recommended that you set the desired service-specific channels (see example below) if not relying on an application-wide default setup. If no application-wide defaults exist, a best guess will be made by configuring the first available channel from the MessageBroker that uses an AMFEndpoint as the default for the RemotingService.

If you wish to have more explicit control over the defaults that will be set on the RemotingService, you can customize them via the remoting-service child element of the message-broker tag. For example:

	<flex:remoting-service default-adapter-id="my-default-remoting-adapter" 
	    default-channels="my-amf, my-secure-amf" />

If you have an existing remoting-config.xml for a legacy BlazeDS application, the RemotingDestinationExporter will be able to work transparently with it, allowing you to gradually migrate to all Spring-managed remoting destinations.

3.3. Using the remoting-destination Tag

The remoting-destination configuration tag can be used to export existing Spring-managed services for direct remoting from a Flex client. Given the following Spring bean definition for a productService bean:

<bean id="productService" class="flex.samples.product.ProductServiceImpl" />

and assuming the existance of a Spring-managed MessageBroker configured via the message-broker tag, the following top-level remoting-destination tag will expose the service for remoting to the Flex client as a remote service destination named productService:

<!-- Expose the productService bean for BlazeDS remoting -->
<flex:remoting-destination ref="productService" />

By default, the remote service destination exposed to the Flex client will use bean name of the bean being exported as the service id of the destination, but this may be overridden using the destination-id attribute on the remoting-destination tag.

An alternate way of using the remoting-destination tag is as a child element of an top-level bean definition. This is even more concise and works well if you don't have a need to keep your domain-layer bean definitions separate from infrastructure concerns such as Flex remoting. (Keep in mind that keeping them separate can lead to easier testability of the core domain layer.) The following achieves the equivalent result to the previous example:

<bean id="productService" class="flex.samples.product.ProductServiceImpl" >
	<flex:remoting-destination />

The methods that are exposed to be called by the Flex client can be more tightly controlled through use of the include-methods and exclude-methods attributes of the remoting-destination tag. The BlazeDS channels over which the destination is exposed can also be controlled using the channels attribute. (These attributes are available whether using the top-level or the nested version.) A more extensively customized example would look something like:

<flex:remoting-destination ref="productService" 
    include-methods="read, update" 
    exclude-methods="create, delete" 
    channels="my-amf, my-secure-amf" />

The remoting-destination tag is transparently configuring a RemotingDestinationExporter bean instance for each bean being exported. The equivalent full bean syntax without the namespace support would be:

<!-- Expose the productService bean for BlazeDS remoting -->
<bean id="product" class="org.springframework.flex.remoting.RemotingDestinationExporter">
    <property name="messageBroker" ref="_messageBroker"/>
    <property name="service" ref="productService"/>
    <property name="destinationId" value="productService"/>
    <property name="includeMethods" value="read, update"/>
    <property name="excludeMethods" value="create, delete"/>
    <property name="channels" value="my-amf, my-secure-amf"/>

3.4. Exporting Beans for Remoting with @RemotingDestination

The @RemotingDestination annotation may be used as an alternative to the XML remoting-destination tag when using annotation-based Spring configuration. @RemotingDestination is used at the type level to indicate the class being exported. @RemotingInclude and @RemotingExclude are used at the method level to mark the methods that should be included and excluded for remoting.

The following example illustrates the productService bean configured exclusively through annotations:

package flex.samples.product;

import org.springframework.flex.remoting.RemotingDestination;
import org.springframework.flex.remoting.RemotingExclude;
import org.springframework.flex.remoting.RemotingInclude;
import org.springframework.stereotype.Service;

public class ProductServiceImpl implements ProductService {

	public Product read(String id) {
	public Product create(Product product){
	public Product update(Product product){
	public void delete(Product product) {

3.4.1. Supplying Externalized Channel Ids

One potential drawback of the @RemotingDestination approach is the potential need to hard-code AMF channel ids in multiple classes throughout your codebase. The specification of the channels property is optional (if not specified, the defaults for the RemotingService will be used), but in cases where they do need to be specified, one shouldn't need to edit all instances of @RemotingDestination any time the channel identifiers change. To support this need, the channels attribute is able to resolve values supplied in the ApplicationContext through a PropertyPlaceholderConfigurer. For example, the previous hardcoded example could be replaced with:

package flex.samples.product;

import org.springframework.flex.remoting.RemotingDestination;
import org.springframework.flex.remoting.RemotingExclude;
import org.springframework.flex.remoting.RemotingInclude;
import org.springframework.stereotype.Service;

public class ProductServiceImpl implements ProductService {

assuming you have a PropertyPlaceholderConfigurer provided along the lines of:

<bean class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer">
	<property name="properties">
			<prop key="channel1">my-amf</prop>
			<prop key="channel2">my-secure-amf, my-amf</prop>

Chapter 4. Communicating with RESTful Spring MVC Endpoints using AMF

4.1. Introduction

TODO - An AmfView and AmfHttpMessageConverter are now provided with Spring BlazeDS Integration to support RESTful communication protocols as an alternative to direct RPC. This is an especially attractive option when your application needs to support more than just a Flex client. Complete documentation for the AMF support for the RESTful Spring MVC @Controller model will be provided in 1.5.0.RC1. For now, see the new insync-rest example that has been added to the Test Drive, which duplicated the full functionality of the complete inSync application that was originally built using BlazeDS Remoting.

Chapter 5. Working with Hibernate

5.1. Introduction

Using Hibernate to handle persistence concerns is quite common in Spring applications. A common problem arises, though, when attempting to directly use Hibernate-loaded entities in AMF messages with BlazeDS. In essence, the default BlazeDS serialization mechanism tries to walk the entire object graph, forcing initialization of any lazily loaded associations that might be encountered. This generally leads either to LazyInitialization errors, or (if using a solution such as Spring's OpenSessionInViewFilter) the undesirable n+1 selects scenario. The other problem that arises is when associations are eagerly loaded, but still wrapped in a Hibernate-specific collection or proxy, which can cause unexpected results in the way the association gets serialized.

Spring BlazeDS Integration 1.5+ provides a simple solution that will allow the direct use of Hibernate entities in AMF messages. A special Spring-aware PropertyProxy (a BlazeDS-specific interface for customizing serialization) is automatically installed that delegates to the Spring 3.0 ConversionService to allow for additional property conversion logic to be plugged in during the serialization/deserialization process.

5.1.1. Configuring Hibernate Entity Serialization/Deserialization Support

The Hibernate serialization/deserialization support will be automatically configured with a default ConversionService upon application startup if Hibernate is detected on the classpath. This support is provided in the form of two different MessageBrokerConfigProcessors - one for "native" Hibernate and one for using Hibernate as a JPA provider. The proper one will be configured based on the presence of the JPA api on the classpath.

The default behavior of the ConversionService (in the case of both "native" Hibernate and JPA), is as follows:

  1. Check each property to see whether it is contains a Hibernate-specific Proxy or Collection

  2. If the Proxy/Collection is initialized, unwrap the underlying value for serialization

  3. If the Proxy/Collection is uninitialized, return null for the value to be serialized

The default behavior may be extended/overridden by manually deploying either the HibernateConfigProcessor or JpaHibernateConfigProcessor as a Spring bean and wiring it into the MessageBroker via the config-processor XML namespace tag. For example, assuming you have a custom ConversionService provided as a bean named "myCustomConversionService", and you are using JPA, you would configure the JpaHibernateConfigProcessor as follows:

	<flex:config-processor ref="myJpaConfigProcessor" />

<bean id="myJpaConfigProcessor" class="org.springframework.flex.core.io.JpaConfigProcessor">
	<property name="conversionService" ref="myConversionService" />

5.1.2. Using Direct Field Mapping

TODO - More details will be provided with 1.5.0.RC1. For now, you can experiment with this by setting the useDirectFieldAccess property on a custom-configured HibernateConfigProcessor or JpaHibernateConfigProcessor instance.

5.1.3. Providing Custom Converters for Hibernate Entity Serialization/Deserialization

Customizing the way Hibernate entities are converted to/from AMF is a matter of writing your own Spring 3 Converters and configuring a ConversionService that uses them.

TODO - Provide examples of custom converters to further control the serialization/deserialization process.

Chapter 6. Securing BlazeDS Destinations with Spring Security

6.1. Introduction

Spring Security provides an extremely flexible alternative to the container-based security support provided out-of-the-box with BlazeDS. Spring BlazeDS Integration provides explicit integration support for incorporating Spring Security smoothly into your Flex/BlazeDS application. Spring Security provides a wealth of different configuration options, but rather than go into the many different combinations here, we'll leave most of that to the Spring Security documentation.

6.1.1. A simple Spring Security 3 configuration

Here is a simple Spring Security starting configuration for use in conjunction with the explicit integration features provided by Spring BlazeDS Integration that should be a solid starting point for securing a typical Flex application:

<beans:beans xmlns="http://www.springframework.org/schema/security"
    xmlns:beans="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.0.xsd
                        http://www.springframework.org/schema/security http://www.springframework.org/schema/security/spring-security-3.0.xsd">

    <http entry-point-ref="entryPoint">
        <anonymous enabled="false"/>
    <beans:bean id="entryPoint" class="org.springframework.flex.security3.FlexAuthenticationEntryPoint"/>
            <user name="john" password="john" authorities="ROLE_USER" />
            <user name="admin" password="admin" authorities="ROLE_USER, ROLE_ADMIN" />
            <user name="guest" password="guest" authorities="ROLE_GUEST" />


With a typical Flex application, this approach is preferred to using Spring Security's auto-config setup. Auto-config sets up a number of features that typically are not needed with a Flex application. For instance, auto-config sets up a default intercept-url entry that requires authentication for all URL paths within the application. The FlexAuthenticationEntryPoint will return a proper AMF error response when such URL's are hit via normal Flex communication processing, but it's invocation should generally be considered a last resort. Most of the time, authentication and authorization processing should happen deeper within the BlazeDS request handling process, where there are opportunities to provide more useful information to the client. (See Securing BlazeDS Channels by Endpoint URL Path for an alternative to intercept-url that generates proper AMF responses for the Flex client.) It is recommended to start simple as in this example, and add the additional features as needed.

6.1.2. Enabling the Spring Security filter chain in web.xml

For a typical setup with Spring Security, it is critical to remember to enable the Spring Security filter chain by adding the appropriate entry to web.xml:




We will assume the above configuration is in place for the remainder of the examples in this chapter. For additional details on the many options available in configuring and using Spring Security, please refer to that project's documentation.

6.2. Configuring the Spring Security Integration

Spring Security integration is enabled through the secured child element of the message-broker tag. The simplest possible configuration would be:

	<flex:secured />

This enables the basic security features. A special BlazeDS LoginCommand implementation is automatically installed that enables ChannelSet.login and ChannelSet.logout requests to integrate with Spring Security's Authorization mechanisms. Additionally, the special LoginCommand enables Spring Security granted authorities to be referenced in BlazeDS XML security constraints. For example, if we were using a traditional BlazeDS remoting destination defined in remoting-config.xml, we could have something like the following:

<destination id="productService">

As you can see, we are referencing the "ROLE_USER" authority from our simple Spring Security setup. The invocation of this remote destination would cause the provided LoginCommand to be invoked to both verify that the user is logged in and to check that they have the appropriate role. Violation of either will result in an exception being thrown by Spring Security.

The provided LoginCommand mimics as much as possible the functionality of Spring Security's AbstractAuthenticationProcessingFilter including taking the necessary actions to coordinate Spring Security's additional features such as, Remember Me, Session Fixation Protection, and Concurrent Session Management upon commencement of the authentication process. Additionally, it will invoke any configured LogoutHandlers as part of the logout process, including both those auto-configured by Spring Security, and any that might be supplied by the application developer.

6.2.1. Using a Custom LoginCommand

While the supplied LoginCommand covers many of the most common security configuration scenarios, sometimes it can be useful to provide your own implementation that either extends SpringSecurityLoginCommand, while using the Spring container to wire in any necessary dependencies. A custom LoginCommand can be supplied via the login-command attribute of the secured tag as follows:

	<flex:secured login-command="myLoginCommand"/>

<bean id="myLoginCommand" class="com.foo.app.security.CustomLoginCommand"/>

If your custom LoginCommand extends SpringSecurityLoginCommand, the following properties will be autowired by the container if possible:

  • rememberMeServices

  • sessionAuthenticationStrategy

  • logoutHandlers

6.2.2. Accessing User Details

When using the ChannelSet.login API call from the Flex client with Spring Security integration enabled, the resulting ResponseEvent fired client-side upon successful completion will contain additional information that can be inspected about the current user. The name and authorities will be extracted from the Authentication object and added to the body of the response message. This information, for example, can then be used to conditionally display different portions of the UI based on the user's identity and granted roles:

var token:AsyncToken = myChannelSet.login("jeremy","atlanta");
	new AsyncResponder(
  		function(event:ResultEvent, token:Object = null):void {
  			if (event.result.authorities.indexOf("ROLE_ADMIN") >= 0) {
  			} else {
  		function(event:FaultEvent, token:Object = null):void {
  			displayErrorMessage("Login Failed: "+event.fault.faultString);

6.2.3. Security Exception Translation

Another feature that is automatically installed when the secured tag is used is automatic exception translation from any thrown SpringSecurityException to the proper BlazeDS SecurityException. The exceptions are caught and translated at the proper point in the execution chain such that it will result in the proper AMF error message being serialized and sent back to the client.

This is alternative to the normal Spring Security behavior where a filter in the chain catches the exception and sends back a corresponding HTTP status code. The problem with sending back HTTP status codes other than 200 is that this causes the Flex client to throw a generic and rather unhelpful exception, and often the status code can't be determined from the Flex client. Sending back specific AMF error messages instead causes a FaultEvent to be thrown client-side that contains the proper security fault code that can then be reasoned on and appropriate action can be taken. This behavior is equivalent to that of the out-of-the-box container-based security mechanisms provided with BlazeDS, so the programming model client-side remains the same.

6.2.4. secured Configuration Attributes

The secured tag has several additional attributes that allow further customization.

If you are not using Spring Security's default bean ids for the AuthenticationManager or AccessDecisionManager, you can specify your custom bean references using the corresponding authentication-manager and access-decision-manager attributes respectively on the secured tag.

The configuration of the provided LoginCommand can be further controlled via the secured tag. The invalidate-flex-session attribute controls whether the current Flex session is invalidated when the logout() method is called on the LoginCommand, and defaults to "true" if not specified. The per-client-authentication attribute turns BlazeDS's per-client authentication mode on when true, and defaults to "false" if not specified. Enabling per-client authentication will cause the Security context to no longer be stored in the session between requests and thus will prevent the use of any Spring Security filters that rely on the Security Context being available in the session, but the authentication and authorization integration will otherwise work as expected. (See the BlazeDS docs for further information on the difference between per-session and per-client authentication.)

6.3. Configuring Endpoint and Destination Security

The Spring Security integration allows flexible control over how you secure your application. You can secure BlazeDS endpoints in a manner similar to Spring Security's traditional URL security, and you can secure your Spring services using the many existing object security mechanisms of Spring Security just as if you were writing a traditional web application.

6.3.1. Securing Specific BlazeDS Channels

You can set security constraints on specific BlazeDS channels using the secured-channel child element of the secured tag. For example:

		<flex:secured-channel channel="my-amf" access="ROLE_USER" />

This results in any request being routed to the "my-amf" channel to require the user to be logged in and to have the "ROLE_USER" authority. If either of those is violated, a FaultEvent will be signaled on the client.

6.3.2. Securing BlazeDS Channels by Endpoint URL Path

You can set security constraints on multiple BlazeDS channels at once using the secured-endpoint-path child element of the secured tag. In this case you specify a URL pattern to be secured instead of a specific channel id. For example:

		<flex:secured-endpoint-path pattern="**/messagebroker/**" access="ROLE_USER" />

This results in any request being routed to any channel whose endpoint URL contains "/messagebroker/" in the path to require the user to be logged in and to have the "ROLE_USER" authority. If either of those is violated, a FaultEvent will be signaled on the client.

6.3.3. Securing Exported Spring Services

Earlier in this chapter you saw an example of using the BlazeDS XML configuration to secure a BlazeDS-managed destination. Since most of the time you will instead be defining destinations by exporting Spring beans using the remoting-destinationtag, an alternate approach to securing destinations is needed. This is where Spring Security comes in, as all of its existing authorization mechanisms should "just work" when security integration is enabled using the secured tag.


When securing destinations as in the examples shown below, it is important to keep in mind that this feature of Spring Security is using Spring AOP. By default, Spring AOP uses JDK dynamic proxies. As such, if you have need to secure methods on a class that are not part of an interface that the class implements, then you will need either factor those methods out into an interface, or configure Spring to use CGLIB-based proxies instead. See the following Spring documentation references for futher guidance:

One of the major strengths of Spring Security is the multiple levels of granularity it provides you when securing your Spring services. You can go from securing your entire service layer in one concise statement:

    <protect-pointcut expression="execution(* com.mycompany.*Service.*(..))" access="ROLE_USER"/>

to controlling access in a more fine-grained manner at the method layer using XML:

<bean id="myService" class="com.mycompany.myapp.MyService">
        <security:protect method="set*" access="ROLE_ADMIN" />
        <security:protect method="get*" access="ROLE_ADMIN,ROLE_USER" />
        <security:protect method="doSomething" access="ROLE_USER" />

to using a combination of XML and annotations:

<security:global-method-security secured-annotations="enabled" jsr250-annotations="enabled"/>
<flex:remoting-destination ref="myBankServiceImpl" />

public interface BankService {
    public Account readAccount(Long id);
    public Account[] findAccounts();
    public Account post(Account account, double amount);


to even more fine-grained ACL-based domain object permissions. For more details on the options available, see the Spring Security documentation.

Chapter 7. Integration with the BlazeDS Message Service

7.1. Introduction

The BlazeDS MessageService provides a common abstraction for asynchronous messaging style communication that is ultimately agnostic to the messaging protocol being used on the server side. Messages can be passed exclusively between Flex clients, from Java POJOs to subscribed Flex clients, from Flex clients to POJO message handlers, or between just about any combination thereof. Using the Spring-managed MessageBroker enables support for using BlazeDS-native AMF messaging, JMS messaging based on Spring's proven and simple JMS abstractions, or messaging using Spring Integration's MessageChannel abstraction, all from a common programming model.

The same Consumer and Producer APIs are used to interact with message destinations from the Flex client, regardless of which underlying messaging protocol is being used on the server. As such, this chapter will focus mainly on setting up and using the various message destination types on the server side. For more details on how to use the Consumer and Producer APIs in the client, see the BlazeDS documentation.

7.2. Configuring the Message Service

The BlazeDS MessageService has traditionally been configured by the inclusion of a messaging-config.xml file in the BlazeDS XML configuration. When using only Spring-managed message destinations, this config file can be left out completely as the inclusion of the message-broker tag in your Spring configuration will cause the MessageService to be configured with sensible defaults if none already exists at startup time. The end result is essentially equivalent to including the following minimal messaging-config.xml in your BlazeDS configuration:

<?xml version="1.0" encoding="UTF-8"?>
<service id="message-service"

        <adapter-definition id="actionscript" 

        <channel ref="my-polling-amf"/>

Note that this assumes that there is already an equivalent application-wide default-channels configuration. It is recommended that you set the desired service-specific channels (see example below) if not relying on an application-wide default setup. If no application-wide defaults exist, a best guess will be made by configuring the first available channel from the MessageBroker that uses an AMFEndpoint with polling enabled as the default for the MessageService.

If you wish to have more explicit control over the defaults that will be set on the MessageService, you can customize them via the message-service child element of the message-broker tag. For example:

	<flex:message-service default-adapter-id="my-default-messaging-adapter" 
		default-channels="my-polling-amf" />

If you have an existing messaging-config.xml for a legacy BlazeDS application, the MessageDestinationFactory will be able to work transparently with it, allowing you to gradually migrate to all Spring-managed messaging destinations.

7.3. Using AMF Message Destinations

For simple messaging needs where there are no requirements for message durability, transaction support, or advanced routing logic, the BlazeDS-native AMF-based message destination is the ideal choice. These destinations can be fully configured in a Spring application context using the message-destination XML namespace tag. For example, assuming a Spring-managed MessageBroker has been configured, all that is needed to set up a basic destination named "event-bus" with default settings is the following:

<flex:message-destination id="event-bus" />    	

This sets up a destination to use the BlazeDS ActionScriptAdapter to handle incoming messages. The settings of the destination can be further customized through the various attributes of the message-destination tag. Here is an example of the "event-bus" destination configured with most of the available attributes:

<flex:message-destination id="event-bus" 
	channels="my-polling-amf, my-secure-amf" 
	throttle-outbound-policy="IGNORE" />    	

The message-broker attribute is a reference to the id of a Spring-managed MessageBroker. The channels attribute allows you to specify a comma-delimited list of the BlazeDS channels to be used (in order of preference) for this destination. The remaining attributes correspond to the options available via the network and server settings when configuring a message destination in the BlazeDS-specific XML. Each of these additional attributes is documented in the XSD to provide live code-completion assistance. For additional details on their usage, see the BlazeDS documentation. The message-destination tag serves as a base for the jms-message-destination and integration-message-destination tags so that the same configuration options are available no matter the type of the underlying MessagingAdapter.

The only attribute available on the message-destination tag that is not available in the JMS and Spring Integration implementations is the service-adapter attribute, which can be used to provide a custom ServiceAdapter via a reference to a ManageableComponentFactoryBean. This can be used to provide integration with additional messaging protocols not directly supported by Spring BlazeDS Integration. See Providing Custom Service Adapters for additional information on using the ManageableComponentFactoryBean.

7.4. Using JMS Message Destinations

For integration with JMS, a special JmsAdapter is provided that internally makes use of Spring's JmsTemplate, DestinationResolver, DefaultMessageListenerContainer and other such JMS abstractions for simplified interaction with JMS resources. The jms-message-destination XML namespace tag is used to expose JMS destinations as BlazeDS message destinations. The minimal attributes that must be specified are the destination id and exactly one of jms-destination, queue-name, or topic-name. A JMS ConnectionFactory reference is also required, but does not have to be explicitly specified if there is already one configured in the current application context with an id of "connectionFactory". For example, to configure a BlazeDS message destination named "chatIn" that uses a Spring-managed ActiveMQ JMS queue with a local ActiveMQ installation:

<bean id="connectionFactory" class="org.apache.activemq.ActiveMQConnectionFactory">
	<property name="brokerURL" value="tcp://localhost:61616"/>
<bean id="chatInQueue" class="org.apache.activemq.command.ActiveMQQueue">
	<constructor-arg value="queue.flex.chat.in"/>

<flex:jms-message-destination id="chatIn" jms-destination="chatInQueue" />    	

Using queue-name or topic-name will cause the destination to be resolved using a Spring DestinationResolver. The destination-resolver, message-converter, and transaction-manager attributes may be used to set custom references to a Spring-managed DestinationResolver, MessageConverter, or TransactionManager respectively.

7.5. Using Spring Integration Message Destinations

For routing messages with Spring Integration, a special IntegrationAdapter is provided that is able to send/receive messages via a MessageChannel. This is especially useful when you have more complex routing needs for your messages, such as connecting to email or FTP endpoints. The integration-message-destination XML namespace tag is used to expose a Spring Integration MessageChannel as a BlazeDS message destination. For example, to configure a BlazeDS message destination named "chatOut" that uses a Spring Integration PublishSubscribeChannel:

<integration:publish-subscribe-channel id="chatOutPubSubChannel" />

<flex:integration-message-destination id="chatOut" message-channel="chatOutPubSubChannel" />

7.6. Sending AMF Messages with the MessageTemplate

A convenient MessageTemplate helper class is provided that allows you to push messages to any BlazeDS MessageDestination from a simple POJO. This provides a nice abstraction over push style messaging that hides away the details of the underlying messaging protocol. Whether using a simple AMF based destination or full-blown JMS, etc., the use of the MessageTemplate stays the same. The only thing the MessageTemplate requires is a reference to a Spring-managed MessageBroker. If the MessageTemplate is configured as a Spring bean, it will try and auto-detect the MessageBroker from its application context.

As an example of how the MessageTemplate could be used, suppose we have a RESTful travel application that has a Flex-based admin console but also exposes an API over HTTP. To give the admin console a "live" view of the data, we want to push updates to it anytime a new hotel booking is created. Given the following setup in our application context:

<flex:message-broker />

<bean id="defaultMessageTemplate" class="org.springframework.flex.messaging.MessageTemplate" />

<flex:message-destination id="bookingUpdates" />

and assuming the Flex client is subscribed to the "bookingUpdates" destination, this could be achieved with the following controller code:

public class BookingController {
	private MessageTemplate template;
	private BookingService bookingService;
	@RequestMapping(value="/bookings", method=RequestMethod.POST)
	public String createBooking(Booking booking){
		booking = bookingService.saveBooking(booking);
		template.send("bookingUpdates", booking);
		return "redirect:/bookings/"+booking.getId();
	public void setTemplate(MessageTemplate template) {
		this.template = template;
	public void setBookingService(BookingService bookingService) {
		this.bookingService = bookingService;

Chapter 8. Building and Running the Spring BlazeDS Integration Samples

8.1. Introduction

Included in the project distribution is a collection of samples called the Spring BlazeDS Integration Test Drive. This samples project is set up to be built with Maven and either run via an embedded Tomcat instance using the Maven Tomcat plugin, or else imported into Eclipse for running via WTP.

8.1.1. Maven Setup

The sample build requires Maven 2.2.0 or greater. Because the build compiles several seperate Flex and AIR projects, it can require setting the MAVEN_OPTS variable for your environment to allocate more memory than the default. The setting we find works well is:

MAVEN_OPTS="-Xms256m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=256m"


8.1.2. Building and Running the Test Drive

Once your Maven environment is set up correctly, cd to {project distribution root}/samples/spring-flex-testdrive and execute:

mvn clean install


This will first build all of the individual Flex projects and then finally assemble the 'testdrive' WAR project. After building successfully, if you'd like to run the application from the command line with an embedded Tomcat instance, execute:

cd testdrive		
mvn tomcat:run


Once the application has started successfully, you can access the samples walk-through at http://localhost:8080/testdrive/index.html

8.1.3. Using BlazeDS 4 with Maven

Spring BlazeDS Integration 1.5 requires BlazeDS 4, but as of this writing the BlazeDS 4 artifacts have not yet been published to Maven central. The artifacts have been published to the Spring External maven repository (as required for the Spring BlazeDS Integration automated builds). The Test Drive is already configured to use this repository, but to use BlazeDS 4 in your own Maven projects, add the following repository entry (either to settings.xml or to your project's pom.xml):

    <name>Spring External Repository</name>


8.1.4. Download the Pre-packaged Test Drive

As a convenience for anyone who is adverse to using Maven and just wants to get the Test Drive up and running quickly in Eclipse, pre-packaged builds of the Test Drive can be downloaded directly via the following links:

Unzip the download and then follow the directions below for importing into Eclipse, substituting the unzipped directory in place of the {project distribution root}/spring-flex-samples/spring-flex-testdrive path.

8.1.5. Importing and Running the Test Drive in Eclipse

The individual Test Drive projects are pre-configured to be imported in Eclipse and run with WTP. (There are a number of individual projects, so you may want to consider creating a fresh workspace or at least create a new working set to manage the projects.) We recommend using the free SpringSource Tool Suite to work with the samples so that you can take full advantage of its extensive Spring support, but any version of Eclipse 3.5+ with WTP should work.

To import the samples, select File->Import...->General->Existing Projects into Workspace and navigate to the {project distribution root}/spring-flex-samples/spring-flex-testdrive directory and import all of the projects found.

There is an individual project for each Flex sample, and one WTP project for the 'testdrive' WAR. Once the projects have been imported, you can start the web application by selecting the 'testdrive' project, right-clicking and selecting Run As->Run on Server. The samples have been most thoroughly tested in Tomcat 6.0, but should run in any Servlet 2.4 container that WTP supports. Once the application has started successfully, you can access the samples walk-through at http://localhost:8080/testdrive/index.html (If running on a server other than Tomcat, change the port number as needed.)

Chapter 9. Working with the Flex Addon for Spring Roo

9.1. Introduction

Spring Roo brings brings a whole new level of productivity to building Java applications. From the Spring Roo Reference Guide:

"Spring Roo is an easy-to-use productivity tool for rapidly building enterprise applications in the Java programming language. It allows you to build high-quality, high-performance, lock-in-free enterprise applications in just minutes. Best of all, Roo works alongside your existing Java knowledge, skills and experience. You probably won't need to learn anything new to use Roo, as there's no new language or runtime platform needed. You simply program in your normal Java way and Roo just works, sitting in the background taking care of the things you don't want to worry about."

To learn more about Spring Roo itself, you'll find numerous resources from the project's homepage at http://www.springsource.org/roo

The Flex Addon for Spring Roo aims to raise the bar for developer productivity in building Spring-based RIAs with a Flex client by meeting the following goals:

  1. Provide the fastest way to get a Spring project configured to use Spring BlazeDS Integration set up and running.
  2. Eliminate the need to manually perform repetitive tasks such as keeping ActionScript and Java domain objects in sync.
  3. Automate round-tripping code-generation of Flex artifacts with a focus on letting developers do what they do best - write code.

9.1.1. Minimum Requirements for the Flex Addon for Spring Roo

Java 5+

Maven 2.2.0+

Spring Roo 1.1.0.M1

9.1.2. Installing the Flex Addon for Spring Roo

The currently released version of the Flex Addon for Spring Roo is 1.0.0.M1. The addon was included in the Spring BlazeDS Integration 1.5.0.M1 distribution and is also available from the Spring Milestones Maven Repository at http://maven.springframework.org/milestone under the group id org.springframework.flex.roo.addon and artifact id org.springframework.flex.roo.addon.


The addon is currently under heavy development and an updated 1.0.0.M2 release should be available in the near future. This next release will be available via Addon Discovery feature of Spring Roo 1.1+. 1.5.0.M1 is known to be incompatible with Roo 1.1 and above. See the Spring Flex community support forums if you are interested in following along with development and trying out the nightly snapshot builds.

First, ensure that you have Spring Roo 1.1.0.M1 set up correctly by following the steps found here.

If you've not already done so, download the Spring BlazeDS Integration 1.5.0.M1 project distribution.

Once you have a working Spring Roo installation, you can install the Flex Addon by simply copying it from {spring_blazeds_dist}/org.springframework.flex.roo.addon-1.0.0.M1.jar into the $ROO_HOME/bundle directory.

To verify that the Flex Addon has been picked up and activated, start Spring Roo from a clean directory and execute the command osgi scr list. You should see org.springframework.flex.roo.addon.FlexCommands listed with a status of active.

9.1.3. Flex Addon for Spring Roo Features

The Flex Addon for Spring Roo provides the following high-level features:

  • Automated setup of the necessary Spring, Maven, and Eclipse configuration for a standard Spring BlazeDS Integration project.

  • Generation of Spring BlazeDS Integration @RemotingDestination services with full CRUD capabilities for a given entity.

  • Continuous synchronization of changes between ActionScript and Java domain classes for AMF remoting.

  • Generation of UI scaffold that is continuously updated as changes occur in the corresponding ActionScript or Java classes.

  • Client-side Flex validator generation corresponding to the Bean Validation annotations on the Java model.

9.1.4. Flex Commands

The Flex Addon provides its functionality through just a few simple commands. flex setup

Once a basic Spring Roo project has been set up, the Flex Addon provides a single flex setup command for adding the necessary Spring, Maven, and Eclipse configuration for a Flex project backed by Spring BlazeDS Integration. Its execution is as simple as:

org.example.rootunes roo> flex setup
Created SRC_MAIN_WEBAPP/WEB-INF/flex/services-config.xml
Created SRC_MAIN_WEBAPP/WEB-INF/spring/flex-config.xml
Created SRC_MAIN_WEBAPP/WEB-INF/spring/webmvc-config.xml
Created SRC_MAIN_WEBAPP/WEB-INF/urlrewrite.xml

Once you have the basic Flex project infrastructure in place, you can start generating remoting destinations and scaffolding. flex remoting scaffold

The flex remoting scaffold command will create a Spring-managed @RemotingDestination and Flex UI scaffolding for a given Java domain entity. It requires a --name option that specifies the name of the @RemotingDestination class to be created, and an --entity option which will be inferred from the current Roo command context if not specified explicitly.

~.domain.Artist roo> flex remoting scaffold --name ~.service.ArtistService          
Created SRC_MAIN_JAVA/org/example/rootunes/service
Created SRC_MAIN_JAVA/org/example/rootunes/service/ArtistService.java
Created ROOT/src/main/flex/org/example/rootunes/domain
Created ROOT/src/main/flex/org/example/rootunes/domain/Artist.as
Created SRC_MAIN_JAVA/org/example/rootunes/service/ArtistService_Roo_Service.aj
Managed ROOT/src/main/flex/rootunes_scaffold.mxml
Managed ROOT/src/main/flex/rootunes_scaffold-config.xml
Created ROOT/src/main/flex/org/example/rootunes/presentation/artist
Created ROOT/src/main/flex/org/example/rootunes/presentation/artist/ArtistEvent.as
Created ROOT/src/main/flex/org/example/rootunes/presentation/artist/ArtistView.mxml
Created ROOT/src/main/flex/org/example/rootunes/presentation/artist/ArtistForm.mxml	

As shown in the listing above, the command causes the following to be generated:

  • A @RemotingDestination that provides persistence operations for the given entity.

  • An ActionScript class that mirrors the Java entity. If there were any JPA relationships in the Java entity, additional ActionScript classes would be generated accordingly. Once this link is established between an ActionScript and Java class, the addon will automatically keep the two in sync and propagate any changes made to the fields in either the ActionScript or Java class, whether those changes are made manually in the code, or with the aid of a Roo command.

  • Flex UI scaffolding for carrying out CRUD operation on the entity. Anytime fields are added to the ActionScript class, the necessary updates will be made to the proper .mxml artifacts to reflect the new fields. (Note - At this time, the Flex addon will not delete fields from the .mxml once they've been added. The syncronization capabilities will be expanded in further releases.)

The @RemotingDestination that gets generated (in this example, org.example.rootunes.ArtistService), will automatically provide basic CRUD functionality for the given Artist entity. The generated methods that provide this functionality are as follows:

Method Signature Comment 
public Artist create(Artist artist){..}The create method will persist a newly created Artist instance and return the persistent instance.
public Artist show(Long id) {..}The show method will return an existing Artist instance matching the provided id.
public List<Artist> list() {..}The list method will return a list of all existing Artist instances.
public List<Artist> listPaged(Integer page, Integer size) {..}The listPaged method will return a list containing a subset of existing Artist instances according to the provided page and size parameters.
public Artist update(Artist artist){..}The update method will update and already persistent Artist instance and return the persistent instance.
public void delete(Long id){..}The delete method will remove an existing Artist instance matching the provided id. flex remoting all

The flex remoting all command is a convenient variation of flex remoting scaffold that will create a Spring-managed @RemotingDestination and Flex UI scaffolding for all Java domain entities in a given --package if it does not already exist. Its usage is shown below:

roo> flex remoting all --package ~.service
Created SRC_MAIN_JAVA/org/example/rootunes/service
Created SRC_MAIN_JAVA/org/example/rootunes/service/ArtistService.java
Created ROOT/src/main/flex/org/example/rootunes/domain
Created ROOT/src/main/flex/org/example/rootunes/domain/Artist.as
Created ROOT/src/main/flex/org/example/rootunes/domain/Album.as
Created SRC_MAIN_JAVA/org/example/rootunes/service/AlbumService.java
Created SRC_MAIN_JAVA/org/example/rootunes/service/ArtistService_Roo_Service.aj
Managed ROOT/src/main/flex/rootunes_scaffold.mxml
Managed ROOT/src/main/flex/rootunes_scaffold-config.xml
Created ROOT/src/main/flex/org/example/rootunes/presentation/artist
Created ROOT/src/main/flex/org/example/rootunes/presentation/artist/ArtistEvent.as
Created ROOT/src/main/flex/org/example/rootunes/presentation/artist/ArtistView.mxml
Created ROOT/src/main/flex/org/example/rootunes/presentation/artist/ArtistForm.mxml
Created SRC_MAIN_JAVA/org/example/rootunes/service/AlbumService_Roo_Service.aj
Managed ROOT/src/main/flex/rootunes_scaffold.mxml
Managed ROOT/src/main/flex/rootunes_scaffold-config.xml
Created ROOT/src/main/flex/org/example/rootunes/presentation/album
Created ROOT/src/main/flex/org/example/rootunes/presentation/album/AlbumEvent.as
Created ROOT/src/main/flex/org/example/rootunes/presentation/album/AlbumView.mxml
Created ROOT/src/main/flex/org/example/rootunes/presentation/album/AlbumForm.mxml

9.1.5. Building and Running a Flex Addon Project

The project configuration provided by the flex setup command prepares the project for both running and building from the command line, via Maven, or running as a Flex and WTP project in SpringSource Tool Suite with the Flash Builder v4 plugin installed. Building and Running a Flex Addon Project with Maven

With the necessary configuration for both the Java and Flex source already set up, building the project is as simple as:

mvn install

Similarly, running the project from the command line via the already configured Maven Tomcat plugin is as simple as:

mvn tomcat:run        		

(Note - The first time you execute these commands with an unpopulated Maven cache, it will take a few minutes to download the necessary dependencies. Don't worry, after you've done this once, the commands execute much faster.)

Once server startup is complete, you should be able to access the scaffolded Flex UI at http://localhost:8080/{project_name}/{project_name}_scaffold.html - for example, in the sample Spring Roo script bundled with the distribution (and in the above examples), we create a project named "rootunes". Once the server is started, the Flex UI can be accessed at: Importing a Flex Addon Project into SpringSource Tool Suite and Flash Builder

To generate the necessary Eclipse metadata for the project, from the project root you must execute

mvn eclipse:eclipse

Once that is done, the project can be imported into SpringSource Tool Suite and run on a server via WTP.

To import the project, select File->Import...->General->Existing Projects into Workspace and navigate to the project's root directory and import the Eclipse project found there. If you have created the project outside of your Eclipse workspace, you should check the "Copy projects into workspace" box in the import dialog in order for the generated Flash Builder metadata to work correctly.

9.1.6. Running the Sample Roo Script

A sample Spring Roo script that generates a complete Flex sample project is included in the Spring BlazeDS Integration distribution. The script can be found at {project_distribution_root}/samples/rootunes.roo

The script can be run using Spring Roo's script command. Create a new project directory, and then start the Roo shell. From there, you can point the script command at the location of the rootunes.roo script. For example, if you've unzipped the distribution in your home directory, the command would be:

roo> script --file ~/spring-flex-1.5.0.M1/samples/rootunes.roo

Once the script has completed, you can build and run the example using the steps described above.

9.1.7. Known Issues

As this is just an M1 release, there are a number of known issues and planned functionality yet to be completed. Some of the more glaring ones are:

  • The scaffolding does not currently generate form fields for editing ONE_TO_MANY or MANY_TO_MANY relationships, though it does generate the correct field types for the relationship in the ActionScript class, so you are free to add the remaining code for editing such relationships manually.

    The generated ActionScript entities currently ignore any superclasses or interfaces that the Java type may declare.

    The ActionScript parser we are using is not able to generate property getters and setters, though it should still parse them without error.

    The ActionScript parser does not give us control over the exact placement of fields in the ActionScript, instead always adding them at the bottom of the Class declaration. You are, of course, free to move the field declarations around to your liking without any adverse effects.

    The round-trip merging functionality for tags in .mxml artifacts is incomplete. It currently can add new fields, but not update or remove existing ones. This will be remedied through a similar approach as Roo 1.1 uses for .jspx artifacts, only we'll use Flex meta-tags instead of additional tag attributes.

    The round-trip updating of script blocks in .mxml files is destructive, meaning it will overwrite changes. This will be remedied in the future by applying the same non-destructive ActionScript metadata layer that we use for the .as files.