Spring Boot Reference Guide

Authors

Phillip Webb, Dave Syer, Josh Long, Stéphane Nicoll, Rob Winch, Andy Wilkinson, Marcel Overdijk, Christian Dupuis, Sébastien Deleuze

1.4.1.RELEASE

Copies of this document may be made for your own use and for distribution to others, provided that you do not charge any fee for such copies and further provided that each copy contains this Copyright Notice, whether distributed in print or electronically.


Table of Contents

I. Spring Boot Documentation
1. About the documentation
2. Getting help
3. First steps
4. Working with Spring Boot
5. Learning about Spring Boot features
6. Moving to production
7. Advanced topics
II. Getting started
8. Introducing Spring Boot
9. System Requirements
9.1. Servlet containers
10. Installing Spring Boot
10.1. Installation instructions for the Java developer
10.1.1. Maven installation
10.1.2. Gradle installation
10.2. Installing the Spring Boot CLI
10.2.1. Manual installation
10.2.2. Installation with SDKMAN!
10.2.3. OSX Homebrew installation
10.2.4. MacPorts installation
10.2.5. Command-line completion
10.2.6. Quick start Spring CLI example
10.3. Upgrading from an earlier version of Spring Boot
11. Developing your first Spring Boot application
11.1. Creating the POM
11.2. Adding classpath dependencies
11.3. Writing the code
11.3.1. The @RestController and @RequestMapping annotations
11.3.2. The @EnableAutoConfiguration annotation
11.3.3. The “main” method
11.4. Running the example
11.5. Creating an executable jar
12. What to read next
III. Using Spring Boot
13. Build systems
13.1. Dependency management
13.2. Maven
13.2.1. Inheriting the starter parent
13.2.2. Using Spring Boot without the parent POM
13.2.3. Changing the Java version
13.2.4. Using the Spring Boot Maven plugin
13.3. Gradle
13.4. Ant
13.5. Starters
14. Structuring your code
14.1. Using the “default” package
14.2. Locating the main application class
15. Configuration classes
15.1. Importing additional configuration classes
15.2. Importing XML configuration
16. Auto-configuration
16.1. Gradually replacing auto-configuration
16.2. Disabling specific auto-configuration
17. Spring Beans and dependency injection
18. Using the @SpringBootApplication annotation
19. Running your application
19.1. Running from an IDE
19.2. Running as a packaged application
19.3. Using the Maven plugin
19.4. Using the Gradle plugin
19.5. Hot swapping
20. Developer tools
20.1. Property defaults
20.2. Automatic restart
20.2.1. Excluding resources
20.2.2. Watching additional paths
20.2.3. Disabling restart
20.2.4. Using a trigger file
20.2.5. Customizing the restart classloader
20.2.6. Known limitations
20.3. LiveReload
20.4. Global settings
20.5. Remote applications
20.5.1. Running the remote client application
20.5.2. Remote update
20.5.3. Remote debug tunnel
21. Packaging your application for production
22. What to read next
IV. Spring Boot features
23. SpringApplication
23.1. Startup failure
23.2. Customizing the Banner
23.3. Customizing SpringApplication
23.4. Fluent builder API
23.5. Application events and listeners
23.6. Web environment
23.7. Accessing application arguments
23.8. Using the ApplicationRunner or CommandLineRunner
23.9. Application exit
23.10. Admin features
24. Externalized Configuration
24.1. Configuring random values
24.2. Accessing command line properties
24.3. Application property files
24.4. Profile-specific properties
24.5. Placeholders in properties
24.6. Using YAML instead of Properties
24.6.1. Loading YAML
24.6.2. Exposing YAML as properties in the Spring Environment
24.6.3. Multi-profile YAML documents
24.6.4. YAML shortcomings
24.6.5. Merging YAML lists
24.7. Type-safe Configuration Properties
24.7.1. Third-party configuration
24.7.2. Relaxed binding
24.7.3. Properties conversion
24.7.4. @ConfigurationProperties Validation
24.7.5. @ConfigurationProperties vs. @Value
25. Profiles
25.1. Adding active profiles
25.2. Programmatically setting profiles
25.3. Profile-specific configuration files
26. Logging
26.1. Log format
26.2. Console output
26.2.1. Color-coded output
26.3. File output
26.4. Log Levels
26.5. Custom log configuration
26.6. Logback extensions
26.6.1. Profile-specific configuration
26.6.2. Environment properties
27. Developing web applications
27.1. The ‘Spring Web MVC framework’
27.1.1. Spring MVC auto-configuration
27.1.2. HttpMessageConverters
27.1.3. Custom JSON Serializers and Deserializers
27.1.4. MessageCodesResolver
27.1.5. Static Content
27.1.6. ConfigurableWebBindingInitializer
27.1.7. Template engines
27.1.8. Error Handling
Custom error pages
Mapping error pages outside of Spring MVC
Error Handling on WebSphere Application Server
27.1.9. Spring HATEOAS
27.1.10. CORS support
27.2. JAX-RS and Jersey
27.3. Embedded servlet container support
27.3.1. Servlets, Filters, and listeners
Registering Servlets, Filters, and listeners as Spring beans
27.3.2. Servlet Context Initialization
Scanning for Servlets, Filters, and listeners
27.3.3. The EmbeddedWebApplicationContext
27.3.4. Customizing embedded servlet containers
Programmatic customization
Customizing ConfigurableEmbeddedServletContainer directly
27.3.5. JSP limitations
28. Security
28.1. OAuth2
28.1.1. Authorization Server
28.1.2. Resource Server
28.2. Token Type in User Info
28.3. Customizing the User Info RestTemplate
28.3.1. Client
28.3.2. Single Sign On
28.4. Actuator Security
29. Working with SQL databases
29.1. Configure a DataSource
29.1.1. Embedded Database Support
29.1.2. Connection to a production database
29.1.3. Connection to a JNDI DataSource
29.2. Using JdbcTemplate
29.3. JPA and ‘Spring Data’
29.3.1. Entity Classes
29.3.2. Spring Data JPA Repositories
29.3.3. Creating and dropping JPA databases
29.4. Using H2’s web console
29.4.1. Changing the H2 console’s path
29.4.2. Securing the H2 console
29.5. Using jOOQ
29.5.1. Code Generation
29.5.2. Using DSLContext
29.5.3. Customizing jOOQ
30. Working with NoSQL technologies
30.1. Redis
30.1.1. Connecting to Redis
30.2. MongoDB
30.2.1. Connecting to a MongoDB database
30.2.2. MongoTemplate
30.2.3. Spring Data MongoDB repositories
30.2.4. Embedded Mongo
30.3. Neo4j
30.3.1. Connecting to a Neo4j database
30.3.2. Using the embedded mode
30.3.3. Neo4jSession
30.3.4. Spring Data Neo4j repositories
30.3.5. Repository example
30.4. Gemfire
30.5. Solr
30.5.1. Connecting to Solr
30.5.2. Spring Data Solr repositories
30.6. Elasticsearch
30.6.1. Connecting to Elasticsearch using Jest
30.6.2. Connecting to Elasticsearch using Spring Data
30.6.3. Spring Data Elasticsearch repositories
30.7. Cassandra
30.7.1. Connecting to Cassandra
30.7.2. Spring Data Cassandra repositories
30.8. Couchbase
30.8.1. Connecting to Couchbase
30.8.2. Spring Data Couchbase repositories
31. Caching
31.1. Supported cache providers
31.1.1. Generic
31.1.2. JCache (JSR-107)
31.1.3. EhCache 2.x
31.1.4. Hazelcast
31.1.5. Infinispan
31.1.6. Couchbase
31.1.7. Redis
31.1.8. Caffeine
31.1.9. Guava
31.1.10. Simple
31.1.11. None
32. Messaging
32.1. JMS
32.1.1. ActiveMQ support
32.1.2. Artemis support
32.1.3. HornetQ support
32.1.4. Using a JNDI ConnectionFactory
32.1.5. Sending a message
32.1.6. Receiving a message
32.2. AMQP
32.2.1. RabbitMQ support
32.2.2. Sending a message
32.2.3. Receiving a message
33. Calling REST services
33.1. RestTemplate customization
34. Sending email
35. Distributed Transactions with JTA
35.1. Using an Atomikos transaction manager
35.2. Using a Bitronix transaction manager
35.3. Using a Narayana transaction manager
35.4. Using a Java EE managed transaction manager
35.5. Mixing XA and non-XA JMS connections
35.6. Supporting an alternative embedded transaction manager
36. Hazelcast
37. Spring Integration
38. Spring Session
39. Monitoring and management over JMX
40. Testing
40.1. Test scope dependencies
40.2. Testing Spring applications
40.3. Testing Spring Boot applications
40.3.1. Detecting test configuration
40.3.2. Excluding test configuration
40.3.3. Working with random ports
40.3.4. Mocking and spying beans
40.3.5. Auto-configured tests
40.3.6. Auto-configured JSON tests
40.3.7. Auto-configured Spring MVC tests
40.3.8. Auto-configured Data JPA tests
40.3.9. Auto-configured REST clients
40.3.10. Auto-configured Spring REST Docs tests
40.3.11. Using Spock to test Spring Boot applications
40.4. Test utilities
40.4.1. ConfigFileApplicationContextInitializer
40.4.2. EnvironmentTestUtils
40.4.3. OutputCapture
40.4.4. TestRestTemplate
41. WebSockets
42. Web Services
43. Creating your own auto-configuration
43.1. Understanding auto-configured beans
43.2. Locating auto-configuration candidates
43.3. Condition annotations
43.3.1. Class conditions
43.3.2. Bean conditions
43.3.3. Property conditions
43.3.4. Resource conditions
43.3.5. Web application conditions
43.3.6. SpEL expression conditions
43.4. Creating your own starter
43.4.1. Naming
43.4.2. Autoconfigure module
43.4.3. Starter module
44. What to read next
V. Spring Boot Actuator: Production-ready features
45. Enabling production-ready features
46. Endpoints
46.1. Customizing endpoints
46.2. Hypermedia for actuator MVC endpoints
46.3. CORS support
46.4. Adding custom endpoints
46.5. Health information
46.6. Security with HealthIndicators
46.6.1. Auto-configured HealthIndicators
46.6.2. Writing custom HealthIndicators
46.7. Application information
46.7.1. Auto-configured InfoContributors
46.7.2. Custom application info information
46.7.3. Git commit information
46.7.4. Build information
46.7.5. Writing custom InfoContributors
47. Monitoring and management over HTTP
47.1. Securing sensitive endpoints
47.2. Customizing the management endpoint paths
47.3. Customizing the management server port
47.4. Configuring management-specific SSL
47.5. Customizing the management server address
47.6. Disabling HTTP endpoints
47.7. HTTP health endpoint access restrictions
48. Monitoring and management over JMX
48.1. Customizing MBean names
48.2. Disabling JMX endpoints
48.3. Using Jolokia for JMX over HTTP
48.3.1. Customizing Jolokia
48.3.2. Disabling Jolokia
49. Monitoring and management using a remote shell
49.1. Connecting to the remote shell
49.1.1. Remote shell credentials
49.2. Extending the remote shell
49.2.1. Remote shell commands
49.2.2. Remote shell plugins
50. Metrics
50.1. System metrics
50.2. DataSource metrics
50.3. Cache metrics
50.4. Tomcat session metrics
50.5. Recording your own metrics
50.6. Adding your own public metrics
50.7. Special features with Java 8
50.8. Metric writers, exporters and aggregation
50.8.1. Example: Export to Redis
50.8.2. Example: Export to Open TSDB
50.8.3. Example: Export to Statsd
50.8.4. Example: Export to JMX
50.9. Aggregating metrics from multiple sources
50.10. Dropwizard Metrics
50.11. Message channel integration
51. Auditing
52. Tracing
52.1. Custom tracing
53. Process monitoring
53.1. Extend configuration
53.2. Programmatically
54. What to read next
VI. Deploying Spring Boot applications
55. Deploying to the cloud
55.1. Cloud Foundry
55.1.1. Binding to services
55.2. Heroku
55.3. OpenShift
55.4. Boxfuse and Amazon Web Services
55.5. Google App Engine
56. Installing Spring Boot applications
56.1. Unix/Linux services
56.1.1. Installation as an init.d service (System V)
Securing an init.d service
56.1.2. Installation as a systemd service
56.1.3. Customizing the startup script
Customizing script when it’s written
Customizing script when it runs
56.2. Microsoft Windows services
57. What to read next
VII. Spring Boot CLI
58. Installing the CLI
59. Using the CLI
59.1. Running applications using the CLI
59.1.1. Deduced “grab” dependencies
59.1.2. Deduced “grab” coordinates
59.1.3. Default import statements
59.1.4. Automatic main method
59.1.5. Custom dependency management
59.2. Testing your code
59.3. Applications with multiple source files
59.4. Packaging your application
59.5. Initialize a new project
59.6. Using the embedded shell
59.7. Adding extensions to the CLI
60. Developing application with the Groovy beans DSL
61. Configuring the CLI with settings.xml
62. What to read next
VIII. Build tool plugins
63. Spring Boot Maven plugin
63.1. Including the plugin
63.2. Packaging executable jar and war files
64. Spring Boot Gradle plugin
64.1. Including the plugin
64.2. Gradle dependency management
64.3. Packaging executable jar and war files
64.4. Running a project in-place
64.5. Spring Boot plugin configuration
64.6. Repackage configuration
64.7. Repackage with custom Gradle configuration
64.7.1. Configuration options
64.7.2. Available layouts
64.8. Understanding how the Gradle plugin works
64.9. Publishing artifacts to a Maven repository using Gradle
64.9.1. Configuring Gradle to produce a pom that inherits dependency management
64.9.2. Configuring Gradle to produce a pom that imports dependency management
65. Spring Boot AntLib module
65.1. Spring Boot Ant tasks
65.1.1. spring-boot:exejar
65.1.2. Examples
65.2. spring-boot:findmainclass
65.2.1. Examples
66. Supporting other build systems
66.1. Repackaging archives
66.2. Nested libraries
66.3. Finding a main class
66.4. Example repackage implementation
67. What to read next
IX. ‘How-to’ guides
68. Spring Boot application
68.1. Create your own FailureAnalyzer
68.2. Troubleshoot auto-configuration
68.3. Customize the Environment or ApplicationContext before it starts
68.4. Build an ApplicationContext hierarchy (adding a parent or root context)
68.5. Create a non-web application
69. Properties & configuration
69.1. Automatically expand properties at build time
69.1.1. Automatic property expansion using Maven
69.1.2. Automatic property expansion using Gradle
69.2. Externalize the configuration of SpringApplication
69.3. Change the location of external properties of an application
69.4. Use ‘short’ command line arguments
69.5. Use YAML for external properties
69.6. Set the active Spring profiles
69.7. Change configuration depending on the environment
69.8. Discover built-in options for external properties
70. Embedded servlet containers
70.1. Add a Servlet, Filter or Listener to an application
70.1.1. Add a Servlet, Filter or Listener using a Spring bean
Disable registration of a Servlet or Filter
70.1.2. Add Servlets, Filters, and Listeners using classpath scanning
70.2. Change the HTTP port
70.3. Use a random unassigned HTTP port
70.4. Discover the HTTP port at runtime
70.5. Configure SSL
70.6. Configure Access Logging
70.7. Use behind a front-end proxy server
70.7.1. Customize Tomcat’s proxy configuration
70.8. Configure Tomcat
70.9. Enable Multiple Connectors with Tomcat
70.10. Use Tomcat’s LegacyCookieProcessor
70.11. Use Jetty instead of Tomcat
70.12. Configure Jetty
70.13. Use Undertow instead of Tomcat
70.14. Configure Undertow
70.15. Enable Multiple Listeners with Undertow
70.16. Use Tomcat 7.x or 8.0
70.16.1. Use Tomcat 7.x or 8.0 with Maven
70.16.2. Use Tomcat 7.x or 8.0 with Gradle
70.17. Use Jetty 9.2
70.17.1. Use Jetty 9.2 with Maven
70.17.2. Use Jetty 9.2 with Gradle
70.18. Use Jetty 8
70.18.1. Use Jetty 8 with Maven
70.18.2. Use Jetty 8 with Gradle
70.19. Create WebSocket endpoints using @ServerEndpoint
70.20. Enable HTTP response compression
71. Spring MVC
71.1. Write a JSON REST service
71.2. Write an XML REST service
71.3. Customize the Jackson ObjectMapper
71.4. Customize the @ResponseBody rendering
71.5. Handling Multipart File Uploads
71.6. Switch off the Spring MVC DispatcherServlet
71.7. Switch off the Default MVC configuration
71.8. Customize ViewResolvers
71.9. Velocity
71.10. Use Thymeleaf 3
72. HTTP clients
72.1. Configure RestTemplate to use a proxy
73. Logging
73.1. Configure Logback for logging
73.1.1. Configure logback for file only output
73.2. Configure Log4j for logging
73.2.1. Use YAML or JSON to configure Log4j 2
74. Data Access
74.1. Configure a DataSource
74.2. Configure Two DataSources
74.3. Use Spring Data repositories
74.4. Separate @Entity definitions from Spring configuration
74.5. Configure JPA properties
74.6. Use a custom EntityManagerFactory
74.7. Use Two EntityManagers
74.8. Use a traditional persistence.xml
74.9. Use Spring Data JPA and Mongo repositories
74.10. Expose Spring Data repositories as REST endpoint
74.11. Configure a component that is used by JPA
75. Database initialization
75.1. Initialize a database using JPA
75.2. Initialize a database using Hibernate
75.3. Initialize a database using Spring JDBC
75.4. Initialize a Spring Batch database
75.5. Use a higher-level database migration tool
75.5.1. Execute Flyway database migrations on startup
75.5.2. Execute Liquibase database migrations on startup
76. Batch applications
76.1. Execute Spring Batch jobs on startup
77. Actuator
77.1. Change the HTTP port or address of the actuator endpoints
77.2. Customize the ‘whitelabel’ error page
77.3. Actuator and Jersey
78. Security
78.1. Switch off the Spring Boot security configuration
78.2. Change the AuthenticationManager and add user accounts
78.3. Enable HTTPS when running behind a proxy server
79. Hot swapping
79.1. Reload static content
79.2. Reload templates without restarting the container
79.2.1. Thymeleaf templates
79.2.2. FreeMarker templates
79.2.3. Groovy templates
79.2.4. Velocity templates
79.3. Fast application restarts
79.4. Reload Java classes without restarting the container
79.4.1. Configuring Spring Loaded for use with Maven
79.4.2. Configuring Spring Loaded for use with Gradle and IntelliJ IDEA
80. Build
80.1. Generate build information
80.2. Generate git information
80.3. Customize dependency versions
80.4. Create an executable JAR with Maven
80.5. Use a Spring Boot application as a dependency
80.6. Extract specific libraries when an executable jar runs
80.7. Create a non-executable JAR with exclusions
80.8. Remote debug a Spring Boot application started with Maven
80.9. Remote debug a Spring Boot application started with Gradle
80.10. Build an executable archive from Ant without using spring-boot-antlib
80.11. How to use Java 6
80.11.1. Embedded servlet container compatibility
80.11.2. Jackson
80.11.3. JTA API compatibility
81. Traditional deployment
81.1. Create a deployable war file
81.2. Create a deployable war file for older servlet containers
81.3. Convert an existing application to Spring Boot
81.4. Deploying a WAR to WebLogic
81.5. Deploying a WAR in an Old (Servlet 2.5) Container
X. Appendices
A. Common application properties
B. Configuration meta-data
B.1. Meta-data format
B.1.1. Group Attributes
B.1.2. Property Attributes
B.1.3. Hint Attributes
B.1.4. Repeated meta-data items
B.2. Providing manual hints
B.2.1. Value hint
B.2.2. Value provider
Any
Class reference
Handle As
Logger name
Spring bean reference
Spring profile name
B.3. Generating your own meta-data using the annotation processor
B.3.1. Nested properties
B.3.2. Adding additional meta-data
C. Auto-configuration classes
C.1. From the “spring-boot-autoconfigure” module
C.2. From the “spring-boot-actuator” module
D. Test auto-configuration annotations
E. The executable jar format
E.1. Nested JARs
E.1.1. The executable jar file structure
E.1.2. The executable war file structure
E.2. Spring Boot’s “JarFile” class
E.2.1. Compatibility with the standard Java “JarFile”
E.3. Launching executable jars
E.3.1. Launcher manifest
E.3.2. Exploded archives
E.4. PropertiesLauncher Features
E.5. Executable jar restrictions
E.5.1. Zip entry compression
E.5.2. System ClassLoader
E.6. Alternative single jar solutions
F. Dependency versions

Part I. Spring Boot Documentation

This section provides a brief overview of Spring Boot reference documentation. Think of it as map for the rest of the document. You can read this reference guide in a linear fashion, or you can skip sections if something doesn’t interest you.

1. About the documentation

The Spring Boot reference guide is available as html, pdf and epub documents. The latest copy is available at docs.spring.io/spring-boot/docs/current/reference.

Copies of this document may be made for your own use and for distribution to others, provided that you do not charge any fee for such copies and further provided that each copy contains this Copyright Notice, whether distributed in print or electronically.

2. Getting help

Having trouble with Spring Boot, We’d like to help!

[Note]Note

All of Spring Boot is open source, including the documentation! If you find problems with the docs; or if you just want to improve them, please get involved.

3. First steps

If you’re just getting started with Spring Boot, or 'Spring' in general, this is the place to start!

4. Working with Spring Boot

Ready to actually start using Spring Boot? We’ve got you covered.

5. Learning about Spring Boot features

Need more details about Spring Boot’s core features? This is for you!

6. Moving to production

When you’re ready to push your Spring Boot application to production, we’ve got some tricks that you might like!

7. Advanced topics

Lastly, we have a few topics for the more advanced user.

Part II. Getting started

If you’re just getting started with Spring Boot, or 'Spring' in general, this is the section for you! Here we answer the basic “what?”, “how?” and “why?” questions. You’ll find a gentle introduction to Spring Boot along with installation instructions. We’ll then build our first Spring Boot application, discussing some core principles as we go.

8. Introducing Spring Boot

Spring Boot makes it easy to create stand-alone, production-grade Spring based Applications that you can “just run”. We take an opinionated view of the Spring platform and third-party libraries so you can get started with minimum fuss. Most Spring Boot applications need very little Spring configuration.

You can use Spring Boot to create Java applications that can be started using java -jar or more traditional war deployments. We also provide a command line tool that runs “spring scripts”.

Our primary goals are:

  • Provide a radically faster and widely accessible getting started experience for all Spring development.
  • Be opinionated out of the box, but get out of the way quickly as requirements start to diverge from the defaults.
  • Provide a range of non-functional features that are common to large classes of projects (e.g. embedded servers, security, metrics, health checks, externalized configuration).
  • Absolutely no code generation and no requirement for XML configuration.

9. System Requirements

By default, Spring Boot 1.4.1.RELEASE requires Java 7 and Spring Framework 4.3.3.RELEASE or above. You can use Spring Boot with Java 6 with some additional configuration. See Section 80.11, “How to use Java 6” for more details. Explicit build support is provided for Maven (3.2+) and Gradle (1.12 or 2.x). Gradle 3 is not supported.

[Tip]Tip

Although you can use Spring Boot with Java 6 or 7, we generally recommend Java 8 if at all possible.

9.1 Servlet containers

The following embedded servlet containers are supported out of the box:

NameServlet VersionJava Version

Tomcat 8

3.1

Java 7+

Tomcat 7

3.0

Java 6+

Jetty 9.3

3.1

Java 8+

Jetty 9.2

3.1

Java 7+

Jetty 8

3.0

Java 6+

Undertow 1.3

3.1

Java 7+

You can also deploy Spring Boot applications to any Servlet 3.0+ compatible container.

10. Installing Spring Boot

Spring Boot can be used with “classic” Java development tools or installed as a command line tool. Regardless, you will need Java SDK v1.6 or higher. You should check your current Java installation before you begin:

$ java -version

If you are new to Java development, or if you just want to experiment with Spring Boot you might want to try the Spring Boot CLI first, otherwise, read on for “classic” installation instructions.

[Tip]Tip

Although Spring Boot is compatible with Java 1.6, if possible, you should consider using the latest version of Java.

10.1 Installation instructions for the Java developer

You can use Spring Boot in the same way as any standard Java library. Simply include the appropriate spring-boot-*.jar files on your classpath. Spring Boot does not require any special tools integration, so you can use any IDE or text editor; and there is nothing special about a Spring Boot application, so you can run and debug as you would any other Java program.

Although you could just copy Spring Boot jars, we generally recommend that you use a build tool that supports dependency management (such as Maven or Gradle).

10.1.1 Maven installation

Spring Boot is compatible with Apache Maven 3.2 or above. If you don’t already have Maven installed you can follow the instructions at maven.apache.org.

[Tip]Tip

On many operating systems Maven can be installed via a package manager. If you’re an OSX Homebrew user try brew install maven. Ubuntu users can run sudo apt-get install maven.

Spring Boot dependencies use the org.springframework.boot groupId. Typically your Maven POM file will inherit from the spring-boot-starter-parent project and declare dependencies to one or more “Starters”. Spring Boot also provides an optional Maven plugin to create executable jars.

Here is a typical pom.xml file:

<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
    <modelVersion>4.0.0</modelVersion>

    <groupId>com.example</groupId>
    <artifactId>myproject</artifactId>
    <version>0.0.1-SNAPSHOT</version>

    <!-- Inherit defaults from Spring Boot -->
    <parent>
        <groupId>org.springframework.boot</groupId>
        <artifactId>spring-boot-starter-parent</artifactId>
        <version>1.4.1.RELEASE</version>
    </parent>

    <!-- Add typical dependencies for a web application -->
    <dependencies>
        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-web</artifactId>
        </dependency>
    </dependencies>

    <!-- Package as an executable jar -->
    <build>
        <plugins>
            <plugin>
                <groupId>org.springframework.boot</groupId>
                <artifactId>spring-boot-maven-plugin</artifactId>
            </plugin>
        </plugins>
    </build>

</project>
[Tip]Tip

The spring-boot-starter-parent is a great way to use Spring Boot, but it might not be suitable all of the time. Sometimes you may need to inherit from a different parent POM, or you might just not like our default settings. See Section 13.2.2, “Using Spring Boot without the parent POM” for an alternative solution that uses an import scope.

10.1.2 Gradle installation

Spring Boot is compatible with Gradle 1.12 or 2.x. 2.14.1 is recommended. Gradle 3 is not supported. If you don’t already have Gradle installed you can follow the instructions at www.gradle.org/.

Spring Boot dependencies can be declared using the org.springframework.boot group. Typically your project will declare dependencies to one or more “Starters”. Spring Boot provides a useful Gradle plugin that can be used to simplify dependency declarations and to create executable jars.

Here is a typical build.gradle file:

buildscript {
    repositories {
        jcenter()
        maven { url "http://repo.spring.io/snapshot" }
        maven { url "http://repo.spring.io/milestone" }
    }
    dependencies {
        classpath("org.springframework.boot:spring-boot-gradle-plugin:1.4.1.RELEASE")
    }
}

apply plugin: 'java'
apply plugin: 'spring-boot'

jar {
    baseName = 'myproject'
    version =  '0.0.1-SNAPSHOT'
}

repositories {
    jcenter()
    maven { url "http://repo.spring.io/snapshot" }
    maven { url "http://repo.spring.io/milestone" }
}

dependencies {
    compile("org.springframework.boot:spring-boot-starter-web")
    testCompile("org.springframework.boot:spring-boot-starter-test")
}

10.2 Installing the Spring Boot CLI

The Spring Boot CLI is a command line tool that can be used if you want to quickly prototype with Spring. It allows you to run Groovy scripts, which means that you have a familiar Java-like syntax, without so much boilerplate code.

You don’t need to use the CLI to work with Spring Boot but it’s definitely the quickest way to get a Spring application off the ground.

10.2.1 Manual installation

You can download the Spring CLI distribution from the Spring software repository:

Cutting edge snapshot distributions are also available.

Once downloaded, follow the INSTALL.txt instructions from the unpacked archive. In summary: there is a spring script (spring.bat for Windows) in a bin/ directory in the .zip file, or alternatively you can use java -jar with the .jar file (the script helps you to be sure that the classpath is set correctly).

10.2.2 Installation with SDKMAN!

SDKMAN! (The Software Development Kit Manager) can be used for managing multiple versions of various binary SDKs, including Groovy and the Spring Boot CLI. Get SDKMAN! from sdkman.io and install Spring Boot with

$ sdk install springboot
$ spring --version
Spring Boot v1.4.1.RELEASE

If you are developing features for the CLI and want easy access to the version you just built, follow these extra instructions.

$ sdk install springboot dev /path/to/spring-boot/spring-boot-cli/target/spring-boot-cli-1.4.1.RELEASE-bin/spring-1.4.1.RELEASE/
$ sdk default springboot dev
$ spring --version
Spring CLI v1.4.1.RELEASE

This will install a local instance of spring called the dev instance. It points at your target build location, so every time you rebuild Spring Boot, spring will be up-to-date.

You can see it by doing this:

$ sdk ls springboot

================================================================================
Available Springboot Versions
================================================================================
> + dev
* 1.4.1.RELEASE

================================================================================
+ - local version
* - installed
> - currently in use
================================================================================

10.2.3 OSX Homebrew installation

If you are on a Mac and using Homebrew, all you need to do to install the Spring Boot CLI is:

$ brew tap pivotal/tap
$ brew install springboot

Homebrew will install spring to /usr/local/bin.

[Note]Note

If you don’t see the formula, your installation of brew might be out-of-date. Just execute brew update and try again.

10.2.4 MacPorts installation

If you are on a Mac and using MacPorts, all you need to do to install the Spring Boot CLI is:

$ sudo port install spring-boot-cli

10.2.5 Command-line completion

Spring Boot CLI ships with scripts that provide command completion for BASH and zsh shells. You can source the script (also named spring) in any shell, or put it in your personal or system-wide bash completion initialization. On a Debian system the system-wide scripts are in /shell-completion/bash and all scripts in that directory are executed when a new shell starts. To run the script manually, e.g. if you have installed using SDKMAN!

$ . ~/.sdkman/candidates/springboot/current/shell-completion/bash/spring
$ spring <HIT TAB HERE>
  grab  help  jar  run  test  version
[Note]Note

If you install Spring Boot CLI using Homebrew or MacPorts, the command-line completion scripts are automatically registered with your shell.

10.2.6 Quick start Spring CLI example

Here’s a really simple web application that you can use to test your installation. Create a file called app.groovy:

@RestController
class ThisWillActuallyRun {

    @RequestMapping("/")
    String home() {
        "Hello World!"
    }

}

Then simply run it from a shell:

$ spring run app.groovy
[Note]Note

It will take some time when you first run the application as dependencies are downloaded. Subsequent runs will be much quicker.

Open localhost:8080 in your favorite web browser and you should see the following output:

Hello World!

10.3 Upgrading from an earlier version of Spring Boot

If you are upgrading from an earlier release of Spring Boot check the “release notes” hosted on the project wiki. You’ll find upgrade instructions along with a list of “new and noteworthy” features for each release.

To upgrade an existing CLI installation use the appropriate package manager command (for example brew upgrade) or, if you manually installed the CLI, follow the standard instructions remembering to update your PATH environment variable to remove any older references.

11. Developing your first Spring Boot application

Let’s develop a simple “Hello World!” web application in Java that highlights some of Spring Boot’s key features. We’ll use Maven to build this project since most IDEs support it.

[Tip]Tip

The spring.io web site contains many “Getting Started” guides that use Spring Boot. If you’re looking to solve a specific problem; check there first.

You can shortcut the steps below by going to start.spring.io and choosing the web starter from the dependencies searcher. This will automatically generate a new project structure so that you can start coding right the way. Check the documentation for more details.

Before we begin, open a terminal to check that you have valid versions of Java and Maven installed.

$ java -version
java version "1.7.0_51"
Java(TM) SE Runtime Environment (build 1.7.0_51-b13)
Java HotSpot(TM) 64-Bit Server VM (build 24.51-b03, mixed mode)
$ mvn -v
Apache Maven 3.2.3 (33f8c3e1027c3ddde99d3cdebad2656a31e8fdf4; 2014-08-11T13:58:10-07:00)
Maven home: /Users/user/tools/apache-maven-3.1.1
Java version: 1.7.0_51, vendor: Oracle Corporation
[Note]Note

This sample needs to be created in its own folder. Subsequent instructions assume that you have created a suitable folder and that it is your “current directory”.

11.1 Creating the POM

We need to start by creating a Maven pom.xml file. The pom.xml is the recipe that will be used to build your project. Open your favorite text editor and add the following:

<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
    <modelVersion>4.0.0</modelVersion>

    <groupId>com.example</groupId>
    <artifactId>myproject</artifactId>
    <version>0.0.1-SNAPSHOT</version>

    <parent>
        <groupId>org.springframework.boot</groupId>
        <artifactId>spring-boot-starter-parent</artifactId>
        <version>1.4.1.RELEASE</version>
    </parent>

    <!-- Additional lines to be added here... -->

</project>

This should give you a working build, you can test it out by running mvn package (you can ignore the “jar will be empty - no content was marked for inclusion!” warning for now).

[Note]Note

At this point you could import the project into an IDE (most modern Java IDE’s include built-in support for Maven). For simplicity, we will continue to use a plain text editor for this example.

11.2 Adding classpath dependencies

Spring Boot provides a number of “Starters” that make easy to add jars to your classpath. Our sample application has already used spring-boot-starter-parent in the parent section of the POM. The spring-boot-starter-parent is a special starter that provides useful Maven defaults. It also provides a dependency-management section so that you can omit version tags for “blessed” dependencies.

Other “Starters” simply provide dependencies that you are likely to need when developing a specific type of application. Since we are developing a web application, we will add a spring-boot-starter-web dependency — but before that, let’s look at what we currently have.

$ mvn dependency:tree

[INFO] com.example:myproject:jar:0.0.1-SNAPSHOT

The mvn dependency:tree command prints a tree representation of your project dependencies. You can see that spring-boot-starter-parent provides no dependencies by itself. Let’s edit our pom.xml and add the spring-boot-starter-web dependency just below the parent section:

<dependencies>
    <dependency>
        <groupId>org.springframework.boot</groupId>
        <artifactId>spring-boot-starter-web</artifactId>
    </dependency>
</dependencies>

If you run mvn dependency:tree again, you will see that there are now a number of additional dependencies, including the Tomcat web server and Spring Boot itself.

11.3 Writing the code

To finish our application we need to create a single Java file. Maven will compile sources from src/main/java by default so you need to create that folder structure, then add a file named src/main/java/Example.java:

import org.springframework.boot.*;
import org.springframework.boot.autoconfigure.*;
import org.springframework.stereotype.*;
import org.springframework.web.bind.annotation.*;

@RestController
@EnableAutoConfiguration
public class Example {

    @RequestMapping("/")
    String home() {
        return "Hello World!";
    }

    public static void main(String[] args) throws Exception {
        SpringApplication.run(Example.class, args);
    }

}

Although there isn’t much code here, quite a lot is going on. Let’s step through the important parts.

11.3.1 The @RestController and @RequestMapping annotations

The first annotation on our Example class is @RestController. This is known as a stereotype annotation. It provides hints for people reading the code, and for Spring, that the class plays a specific role. In this case, our class is a web @Controller so Spring will consider it when handling incoming web requests.

The @RequestMapping annotation provides “routing” information. It is telling Spring that any HTTP request with the path “/” should be mapped to the home method. The @RestController annotation tells Spring to render the resulting string directly back to the caller.

[Tip]Tip

The @RestController and @RequestMapping annotations are Spring MVC annotations (they are not specific to Spring Boot). See the MVC section in the Spring Reference Documentation for more details.

11.3.2 The @EnableAutoConfiguration annotation

The second class-level annotation is @EnableAutoConfiguration. This annotation tells Spring Boot to “guess” how you will want to configure Spring, based on the jar dependencies that you have added. Since spring-boot-starter-web added Tomcat and Spring MVC, the auto-configuration will assume that you are developing a web application and setup Spring accordingly.

11.3.3 The “main” method

The final part of our application is the main method. This is just a standard method that follows the Java convention for an application entry point. Our main method delegates to Spring Boot’s SpringApplication class by calling run. SpringApplication will bootstrap our application, starting Spring which will in turn start the auto-configured Tomcat web server. We need to pass Example.class as an argument to the run method to tell SpringApplication which is the primary Spring component. The args array is also passed through to expose any command-line arguments.

11.4 Running the example

At this point our application should work. Since we have used the spring-boot-starter-parent POM we have a useful run goal that we can use to start the application. Type mvn spring-boot:run from the root project directory to start the application:

$ mvn spring-boot:run

  .   ____          _            __ _ _
 /\\ / ___'_ __ _ _(_)_ __  __ _ \ \ \ \
( ( )\___ | '_ | '_| | '_ \/ _` | \ \ \ \
 \\/  ___)| |_)| | | | | || (_| |  ) ) ) )
  '  |____| .__|_| |_|_| |_\__, | / / / /
 =========|_|==============|___/=/_/_/_/
 :: Spring Boot ::  (v1.4.1.RELEASE)
....... . . .
....... . . . (log output here)
....... . . .
........ Started Example in 2.222 seconds (JVM running for 6.514)

If you open a web browser to localhost:8080 you should see the following output:

Hello World!

To gracefully exit the application hit ctrl-c.

11.5 Creating an executable jar

Let’s finish our example by creating a completely self-contained executable jar file that we could run in production. Executable jars (sometimes called “fat jars”) are archives containing your compiled classes along with all of the jar dependencies that your code needs to run.

To create an executable jar we need to add the spring-boot-maven-plugin to our pom.xml. Insert the following lines just below the dependencies section:

<build>
    <plugins>
        <plugin>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-maven-plugin</artifactId>
        </plugin>
    </plugins>
</build>
[Note]Note

The spring-boot-starter-parent POM includes <executions> configuration to bind the repackage goal. If you are not using the parent POM you will need to declare this configuration yourself. See the plugin documentation for details.

Save your pom.xml and run mvn package from the command line:

$ mvn package

[INFO] Scanning for projects...
[INFO]
[INFO] ------------------------------------------------------------------------
[INFO] Building myproject 0.0.1-SNAPSHOT
[INFO] ------------------------------------------------------------------------
[INFO] .... ..
[INFO] --- maven-jar-plugin:2.4:jar (default-jar) @ myproject ---
[INFO] Building jar: /Users/developer/example/spring-boot-example/target/myproject-0.0.1-SNAPSHOT.jar
[INFO]
[INFO] --- spring-boot-maven-plugin:1.4.1.RELEASE:repackage (default) @ myproject ---
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------

If you look in the target directory you should see myproject-0.0.1-SNAPSHOT.jar. The file should be around 10 Mb in size. If you want to peek inside, you can use jar tvf:

$ jar tvf target/myproject-0.0.1-SNAPSHOT.jar

You should also see a much smaller file named myproject-0.0.1-SNAPSHOT.jar.original in the target directory. This is the original jar file that Maven created before it was repackaged by Spring Boot.

To run that application, use the java -jar command:

$ java -jar target/myproject-0.0.1-SNAPSHOT.jar

  .   ____          _            __ _ _
 /\\ / ___'_ __ _ _(_)_ __  __ _ \ \ \ \
( ( )\___ | '_ | '_| | '_ \/ _` | \ \ \ \
 \\/  ___)| |_)| | | | | || (_| |  ) ) ) )
  '  |____| .__|_| |_|_| |_\__, | / / / /
 =========|_|==============|___/=/_/_/_/
 :: Spring Boot ::  (v1.4.1.RELEASE)
....... . . .
....... . . . (log output here)
....... . . .
........ Started Example in 2.536 seconds (JVM running for 2.864)

As before, to gracefully exit the application hit ctrl-c.

12. What to read next

Hopefully this section has provided you with some of the Spring Boot basics, and got you on your way to writing your own applications. If you’re a task-oriented type of developer you might want to jump over to spring.io and check out some of the getting started guides that solve specific “How do I do that with Spring” problems; we also have Spring Boot-specific How-to reference documentation.

The Spring Boot repository has also a bunch of samples you can run. The samples are independent of the rest of the code (that is you don’t need to build the rest to run or use the samples).

Otherwise, the next logical step is to read Part III, “Using Spring Boot”. If you’re really impatient, you could also jump ahead and read about Spring Boot features.

Part III. Using Spring Boot

This section goes into more detail about how you should use Spring Boot. It covers topics such as build systems, auto-configuration and how to run your applications. We also cover some Spring Boot best practices. Although there is nothing particularly special about Spring Boot (it is just another library that you can consume), there are a few recommendations that, when followed, will make your development process just a little easier.

If you’re just starting out with Spring Boot, you should probably read the Getting Started guide before diving into this section.

13. Build systems

It is strongly recommended that you choose a build system that supports dependency management, and one that can consume artifacts published to the “Maven Central” repository. We would recommend that you choose Maven or Gradle. It is possible to get Spring Boot to work with other build systems (Ant for example), but they will not be particularly well supported.

13.1 Dependency management

Each release of Spring Boot provides a curated list of dependencies it supports. In practice, you do not need to provide a version for any of these dependencies in your build configuration as Spring Boot is managing that for you. When you upgrade Spring Boot itself, these dependencies will be upgraded as well in a consistent way.

[Note]Note

You can still specify a version and override Spring Boot’s recommendations if you feel that’s necessary.

The curated list contains all the spring modules that you can use with Spring Boot as well as a refined list of third party libraries. The list is available as a standard Bills of Materials (spring-boot-dependencies) and additional dedicated support for Maven and Gradle are available as well.

[Warning]Warning

Each release of Spring Boot is associated with a base version of the Spring Framework so we highly recommend you to not specify its version on your own.

13.2 Maven

Maven users can inherit from the spring-boot-starter-parent project to obtain sensible defaults. The parent project provides the following features:

  • Java 1.6 as the default compiler level.
  • UTF-8 source encoding.
  • A Dependency Management section, allowing you to omit <version> tags for common dependencies, inherited from the spring-boot-dependencies POM.
  • Sensible resource filtering.
  • Sensible plugin configuration (exec plugin, surefire, Git commit ID, shade).
  • Sensible resource filtering for application.properties and application.yml including profile-specific files (e.g. application-foo.properties and application-foo.yml)

On the last point: since the default config files accept Spring style placeholders (${…​}) the Maven filtering is changed to use @..@ placeholders (you can override that with a Maven property resource.delimiter).

13.2.1 Inheriting the starter parent

To configure your project to inherit from the spring-boot-starter-parent simply set the parent:

<!-- Inherit defaults from Spring Boot -->
<parent>
    <groupId>org.springframework.boot</groupId>
    <artifactId>spring-boot-starter-parent</artifactId>
    <version>1.4.1.RELEASE</version>
</parent>
[Note]Note

You should only need to specify the Spring Boot version number on this dependency. If you import additional starters, you can safely omit the version number.

With that setup, you can also override individual dependencies by overriding a property in your own project. For instance, to upgrade to another Spring Data release train you’d add the following to your pom.xml.

<properties>
    <spring-data-releasetrain.version>Fowler-SR2</spring-data-releasetrain.version>
</properties>
[Tip]Tip

Check the spring-boot-dependencies pom for a list of supported properties.

13.2.2 Using Spring Boot without the parent POM

Not everyone likes inheriting from the spring-boot-starter-parent POM. You may have your own corporate standard parent that you need to use, or you may just prefer to explicitly declare all your Maven configuration.

If you don’t want to use the spring-boot-starter-parent, you can still keep the benefit of the dependency management (but not the plugin management) by using a scope=import dependency:

<dependencyManagement>
     <dependencies>
        <dependency>
            <!-- Import dependency management from Spring Boot -->
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-dependencies</artifactId>
            <version>1.4.1.RELEASE</version>
            <type>pom</type>
            <scope>import</scope>
        </dependency>
    </dependencies>
</dependencyManagement>

That setup does not allow you to override individual dependencies using a property as explained above. To achieve the same result, you’d need to add an entry in the dependencyManagement of your project before the spring-boot-dependencies entry. For instance, to upgrade to another Spring Data release train you’d add the following to your pom.xml.

<dependencyManagement>
    <dependencies>
        <!-- Override Spring Data release train provided by Spring Boot -->
        <dependency>
            <groupId>org.springframework.data</groupId>
            <artifactId>spring-data-releasetrain</artifactId>
            <version>Fowler-SR2</version>
            <scope>import</scope>
            <type>pom</type>
        </dependency>
        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-dependencies</artifactId>
            <version>1.4.1.RELEASE</version>
            <type>pom</type>
            <scope>import</scope>
        </dependency>
    </dependencies>
</dependencyManagement>
[Note]Note

In the example above, we specify a BOM but any dependency type can be overridden that way.

13.2.3 Changing the Java version

The spring-boot-starter-parent chooses fairly conservative Java compatibility. If you want to follow our recommendation and use a later Java version you can add a java.version property:

<properties>
    <java.version>1.8</java.version>
</properties>

13.2.4 Using the Spring Boot Maven plugin

Spring Boot includes a Maven plugin that can package the project as an executable jar. Add the plugin to your <plugins> section if you want to use it:

<build>
    <plugins>
        <plugin>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-maven-plugin</artifactId>
        </plugin>
    </plugins>
</build>
[Note]Note

If you use the Spring Boot starter parent pom, you only need to add the plugin, there is no need for to configure it unless you want to change the settings defined in the parent.

13.3 Gradle

Gradle users can directly import ‘starters’ in their dependencies section. Unlike Maven, there is no “super parent” to import to share some configuration.

apply plugin: 'java'

repositories {
    jcenter()
}

dependencies {
    compile("org.springframework.boot:spring-boot-starter-web:1.4.1.RELEASE")
}

The spring-boot-gradle-plugin is also available and provides tasks to create executable jars and run projects from source. It also provides dependency management that, among other capabilities, allows you to omit the version number for any dependencies that are managed by Spring Boot:

buildscript {
    repositories {
        jcenter()
    }

    dependencies {
        classpath("org.springframework.boot:spring-boot-gradle-plugin:1.4.1.RELEASE")
    }
}

apply plugin: 'java'
apply plugin: 'spring-boot'

repositories {
    jcenter()
}

dependencies {
    compile("org.springframework.boot:spring-boot-starter-web")
    testCompile("org.springframework.boot:spring-boot-starter-test")
}

13.4 Ant

It is possible to build a Spring Boot project using Apache Ant+Ivy. The spring-boot-antlib “AntLib” module is also available to help Ant create executable jars.

To declare dependencies a typical ivy.xml file will look something like this:

<ivy-module version="2.0">
    <info organisation="org.springframework.boot" module="spring-boot-sample-ant" />
    <configurations>
        <conf name="compile" description="everything needed to compile this module" />
        <conf name="runtime" extends="compile" description="everything needed to run this module" />
    </configurations>
    <dependencies>
        <dependency org="org.springframework.boot" name="spring-boot-starter"
            rev="${spring-boot.version}" conf="compile" />
    </dependencies>
</ivy-module>

A typical build.xml will look like this:

<project
    xmlns:ivy="antlib:org.apache.ivy.ant"
    xmlns:spring-boot="antlib:org.springframework.boot.ant"
    name="myapp" default="build">

    <property name="spring-boot.version" value="1.3.0.BUILD-SNAPSHOT" />

    <target name="resolve" description="--> retrieve dependencies with ivy">
        <ivy:retrieve pattern="lib/[conf]/[artifact]-[type]-[revision].[ext]" />
    </target>

    <target name="classpaths" depends="resolve">
        <path id="compile.classpath">
            <fileset dir="lib/compile" includes="*.jar" />
        </path>
    </target>

    <target name="init" depends="classpaths">
        <mkdir dir="build/classes" />
    </target>

    <target name="compile" depends="init" description="compile">
        <javac srcdir="src/main/java" destdir="build/classes" classpathref="compile.classpath" />
    </target>

    <target name="build" depends="compile">
        <spring-boot:exejar destfile="build/myapp.jar" classes="build/classes">
            <spring-boot:lib>
                <fileset dir="lib/runtime" />
            </spring-boot:lib>
        </spring-boot:exejar>
    </target>
</project>
[Tip]Tip

See the Section 80.10, “Build an executable archive from Ant without using spring-boot-antlib” “How-to” if you don’t want to use the spring-boot-antlib module.

13.5 Starters

Starters are a set of convenient dependency descriptors that you can include in your application. You get a one-stop-shop for all the Spring and related technology that you need, without having to hunt through sample code and copy paste loads of dependency descriptors. For example, if you want to get started using Spring and JPA for database access, just include the spring-boot-starter-data-jpa dependency in your project, and you are good to go.

The starters contain a lot of the dependencies that you need to get a project up and running quickly and with a consistent, supported set of managed transitive dependencies.

The following application starters are provided by Spring Boot under the org.springframework.boot group:

Table 13.1. Spring Boot application starters

NameDescriptionPom

spring-boot-starter-thymeleaf

Starter for building MVC web applications using Thymeleaf views

Pom

spring-boot-starter-ws

Starter for using Spring Web Services. Deprecated as of 1.4 in favor of spring-boot-starter-web-services

Pom

spring-boot-starter-data-couchbase

Starter for using Couchbase document-oriented database and Spring Data Couchbase

Pom

spring-boot-starter-artemis

Starter for JMS messaging using Apache Artemis

Pom

spring-boot-starter-web-services

Starter for using Spring Web Services

Pom

spring-boot-starter-mail

Starter for using Java Mail and Spring Framework’s email sending support

Pom

spring-boot-starter-data-redis

Starter for using Redis key-value data store with Spring Data Redis and the Jedis client

Pom

spring-boot-starter-web

Starter for building web, including RESTful, applications using Spring MVC. Uses Tomcat as the default embedded container

Pom

spring-boot-starter-data-gemfire

Starter for using GemFire distributed data store and Spring Data GemFire

Pom

spring-boot-starter-activemq

Starter for JMS messaging using Apache ActiveMQ

Pom

spring-boot-starter-data-elasticsearch

Starter for using Elasticsearch search and analytics engine and Spring Data Elasticsearch

Pom

spring-boot-starter-integration

Starter for using Spring Integration

Pom

spring-boot-starter-test

Starter for testing Spring Boot applications with libraries including JUnit, Hamcrest and Mockito

Pom

spring-boot-starter-hornetq

Starter for JMS messaging using HornetQ. Deprecated as of 1.4 in favor of spring-boot-starter-artemis

Pom

spring-boot-starter-jdbc

Starter for using JDBC with the Tomcat JDBC connection pool

Pom

spring-boot-starter-mobile

Starter for building web applications using Spring Mobile

Pom

spring-boot-starter-validation

Starter for using Java Bean Validation with Hibernate Validator

Pom

spring-boot-starter-hateoas

Starter for building hypermedia-based RESTful web application with Spring MVC and Spring HATEOAS

Pom

spring-boot-starter-jersey

Starter for building RESTful web applications using JAX-RS and Jersey. An alternative to spring-boot-starter-web

Pom

spring-boot-starter-data-neo4j

Starter for using Neo4j graph database and Spring Data Neo4j

Pom

spring-boot-starter-websocket

Starter for building WebSocket applications using Spring Framework’s WebSocket support

Pom

spring-boot-starter-aop

Starter for aspect-oriented programming with Spring AOP and AspectJ

Pom

spring-boot-starter-amqp

Starter for using Spring AMQP and Rabbit MQ

Pom

spring-boot-starter-data-cassandra

Starter for using Cassandra distributed database and Spring Data Cassandra

Pom

spring-boot-starter-social-facebook

Starter for using Spring Social Facebook

Pom

spring-boot-starter-jta-atomikos

Starter for JTA transactions using Atomikos

Pom

spring-boot-starter-security

Starter for using Spring Security

Pom

spring-boot-starter-mustache

Starter for building MVC web applications using Mustache views

Pom

spring-boot-starter-data-jpa

Starter for using Spring Data JPA with Hibernate

Pom

spring-boot-starter

Core starter, including auto-configuration support, logging and YAML

Pom

spring-boot-starter-velocity

Starter for building MVC web applications using Velocity views. Deprecated since 1.4

Pom

spring-boot-starter-groovy-templates

Starter for building MVC web applications using Groovy Templates views

Pom

spring-boot-starter-freemarker

Starter for building MVC web applications using FreeMarker views

Pom

spring-boot-starter-batch

Starter for using Spring Batch

Pom

spring-boot-starter-redis

Starter for using Redis key-value data store with Spring Data Redis and the Jedis client. Deprecated as of 1.4 in favor of spring-boot-starter-data-redis

Pom

spring-boot-starter-social-linkedin

Stater for using Spring Social LinkedIn

Pom

spring-boot-starter-cache

Starter for using Spring Framework’s caching support

Pom

spring-boot-starter-data-solr

Starter for using the Apache Solr search platform with Spring Data Solr

Pom

spring-boot-starter-data-mongodb

Starter for using MongoDB document-oriented database and Spring Data MongoDB

Pom

spring-boot-starter-jooq

Starter for using jOOQ to access SQL databases. An alternative to spring-boot-starter-data-jpa or spring-boot-starter-jdbc

Pom

spring-boot-starter-jta-narayana

Spring Boot Narayana JTA Starter

Pom

spring-boot-starter-cloud-connectors

Starter for using Spring Cloud Connectors which simplifies connecting to services in cloud platforms like Cloud Foundry and Heroku

Pom

spring-boot-starter-jta-bitronix

Starter for JTA transactions using Bitronix

Pom

spring-boot-starter-social-twitter

Starter for using Spring Social Twitter

Pom

spring-boot-starter-data-rest

Starter for exposing Spring Data repositories over REST using Spring Data REST

Pom


In addition to the application starters, the following starters can be used to add production ready features:

Table 13.2. Spring Boot production starters

NameDescriptionPom

spring-boot-starter-actuator

Starter for using Spring Boot’s Actuator which provides production ready features to help you monitor and manage your application

Pom

spring-boot-starter-remote-shell

Starter for using the CRaSH remote shell to monitor and manage your application over SSH

Pom


Finally, Spring Boot also includes some starters that can be used if you want to exclude or swap specific technical facets:

Table 13.3. Spring Boot technical starters

NameDescriptionPom

spring-boot-starter-undertow

Starter for using Undertow as the embedded servlet container. An alternative to spring-boot-starter-tomcat

Pom

spring-boot-starter-jetty

Starter for using Jetty as the embedded servlet container. An alternative to spring-boot-starter-tomcat

Pom

spring-boot-starter-logging

Starter for logging using Logback. Default logging starter

Pom

spring-boot-starter-tomcat

Starter for using Tomcat as the embedded servlet container. Default servlet container starter used by spring-boot-starter-web

Pom

spring-boot-starter-log4j2

Starter for using Log4j2 for logging. An alternative to spring-boot-starter-logging

Pom


[Tip]Tip

For a list of additional community contributed starters, see the README file in the spring-boot-starters module on GitHub.

14. Structuring your code

Spring Boot does not require any specific code layout to work, however, there are some best practices that help.

14.1 Using the “default” package

When a class doesn’t include a package declaration it is considered to be in the “default package”. The use of the “default package” is generally discouraged, and should be avoided. It can cause particular problems for Spring Boot applications that use @ComponentScan, @EntityScan or @SpringBootApplication annotations, since every class from every jar, will be read.

[Tip]Tip

We recommend that you follow Java’s recommended package naming conventions and use a reversed domain name (for example, com.example.project).

14.2 Locating the main application class

We generally recommend that you locate your main application class in a root package above other classes. The @EnableAutoConfiguration annotation is often placed on your main class, and it implicitly defines a base “search package” for certain items. For example, if you are writing a JPA application, the package of the @EnableAutoConfiguration annotated class will be used to search for @Entity items.

Using a root package also allows the @ComponentScan annotation to be used without needing to specify a basePackage attribute. You can also use the @SpringBootApplication annotation if your main class is in the root package.

Here is a typical layout:

com
 +- example
     +- myproject
         +- Application.java
         |
         +- domain
         |   +- Customer.java
         |   +- CustomerRepository.java
         |
         +- service
         |   +- CustomerService.java
         |
         +- web
             +- CustomerController.java

The Application.java file would declare the main method, along with the basic @Configuration.

package com.example.myproject;

import org.springframework.boot.SpringApplication;
import org.springframework.boot.autoconfigure.EnableAutoConfiguration;
import org.springframework.context.annotation.ComponentScan;
import org.springframework.context.annotation.Configuration;

@Configuration
@EnableAutoConfiguration
@ComponentScan
public class Application {

    public static void main(String[] args) {
        SpringApplication.run(Application.class, args);
    }

}

15. Configuration classes

Spring Boot favors Java-based configuration. Although it is possible to call SpringApplication.run() with an XML source, we generally recommend that your primary source is a @Configuration class. Usually the class that defines the main method is also a good candidate as the primary @Configuration.

[Tip]Tip

Many Spring configuration examples have been published on the Internet that use XML configuration. Always try to use the equivalent Java-based configuration if possible. Searching for enable* annotations can be a good starting point.

15.1 Importing additional configuration classes

You don’t need to put all your @Configuration into a single class. The @Import annotation can be used to import additional configuration classes. Alternatively, you can use @ComponentScan to automatically pick up all Spring components, including @Configuration classes.

15.2 Importing XML configuration

If you absolutely must use XML based configuration, we recommend that you still start with a @Configuration class. You can then use an additional @ImportResource annotation to load XML configuration files.

16. Auto-configuration

Spring Boot auto-configuration attempts to automatically configure your Spring application based on the jar dependencies that you have added. For example, If HSQLDB is on your classpath, and you have not manually configured any database connection beans, then we will auto-configure an in-memory database.

You need to opt-in to auto-configuration by adding the @EnableAutoConfiguration or @SpringBootApplication annotations to one of your @Configuration classes.

[Tip]Tip

You should only ever add one @EnableAutoConfiguration annotation. We generally recommend that you add it to your primary @Configuration class.

16.1 Gradually replacing auto-configuration

Auto-configuration is noninvasive, at any point you can start to define your own configuration to replace specific parts of the auto-configuration. For example, if you add your own DataSource bean, the default embedded database support will back away.

If you need to find out what auto-configuration is currently being applied, and why, start your application with the --debug switch. This will enable debug logs for a selection of core loggers and log an auto-configuration report to the console.

16.2 Disabling specific auto-configuration

If you find that specific auto-configure classes are being applied that you don’t want, you can use the exclude attribute of @EnableAutoConfiguration to disable them.

import org.springframework.boot.autoconfigure.*;
import org.springframework.boot.autoconfigure.jdbc.*;
import org.springframework.context.annotation.*;

@Configuration
@EnableAutoConfiguration(exclude={DataSourceAutoConfiguration.class})
public class MyConfiguration {
}

If the class is not on the classpath, you can use the excludeName attribute of the annotation and specify the fully qualified name instead. Finally, you can also control the list of auto-configuration classes to exclude via the spring.autoconfigure.exclude property.

[Tip]Tip

You can define exclusions both at the annotation level and using the property.

17. Spring Beans and dependency injection

You are free to use any of the standard Spring Framework techniques to define your beans and their injected dependencies. For simplicity, we often find that using @ComponentScan to find your beans, in combination with @Autowired constructor injection works well.

If you structure your code as suggested above (locating your application class in a root package), you can add @ComponentScan without any arguments. All of your application components (@Component, @Service, @Repository, @Controller etc.) will be automatically registered as Spring Beans.

Here is an example @Service Bean that uses constructor injection to obtain a required RiskAssessor bean.

package com.example.service;

import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.stereotype.Service;

@Service
public class DatabaseAccountService implements AccountService {

    private final RiskAssessor riskAssessor;

    @Autowired
    public DatabaseAccountService(RiskAssessor riskAssessor) {
        this.riskAssessor = riskAssessor;
    }

    // ...

}
[Tip]Tip

Notice how using constructor injection allows the riskAssessor field to be marked as final, indicating that it cannot be subsequently changed.

18. Using the @SpringBootApplication annotation

Many Spring Boot developers always have their main class annotated with @Configuration, @EnableAutoConfiguration and @ComponentScan. Since these annotations are so frequently used together (especially if you follow the best practices above), Spring Boot provides a convenient @SpringBootApplication alternative.

The @SpringBootApplication annotation is equivalent to using @Configuration, @EnableAutoConfiguration and @ComponentScan with their default attributes:

package com.example.myproject;

import org.springframework.boot.SpringApplication;
import org.springframework.boot.autoconfigure.SpringBootApplication;

@SpringBootApplication // same as @Configuration @EnableAutoConfiguration @ComponentScan
public class Application {

    public static void main(String[] args) {
        SpringApplication.run(Application.class, args);
    }

}
[Note]Note

@SpringBootApplication also provides aliases to customize the attributes of @EnableAutoConfiguration and @ComponentScan.

19. Running your application

One of the biggest advantages of packaging your application as jar and using an embedded HTTP server is that you can run your application as you would any other. Debugging Spring Boot applications is also easy; you don’t need any special IDE plugins or extensions.

[Note]Note

This section only covers jar based packaging, If you choose to package your application as a war file you should refer to your server and IDE documentation.

19.1 Running from an IDE

You can run a Spring Boot application from your IDE as a simple Java application, however, first you will need to import your project. Import steps will vary depending on your IDE and build system. Most IDEs can import Maven projects directly, for example Eclipse users can select Import…​Existing Maven Projects from the File menu.

If you can’t directly import your project into your IDE, you may be able to generate IDE metadata using a build plugin. Maven includes plugins for Eclipse and IDEA; Gradle offers plugins for various IDEs.

[Tip]Tip

If you accidentally run a web application twice you will see a “Port already in use” error. STS users can use the Relaunch button rather than Run to ensure that any existing instance is closed.

19.2 Running as a packaged application

If you use the Spring Boot Maven or Gradle plugins to create an executable jar you can run your application using java -jar. For example:

$ java -jar target/myproject-0.0.1-SNAPSHOT.jar

It is also possible to run a packaged application with remote debugging support enabled. This allows you to attach a debugger to your packaged application:

$ java -Xdebug -Xrunjdwp:server=y,transport=dt_socket,address=8000,suspend=n \
       -jar target/myproject-0.0.1-SNAPSHOT.jar

19.3 Using the Maven plugin

The Spring Boot Maven plugin includes a run goal which can be used to quickly compile and run your application. Applications run in an exploded form just like in your IDE.

$ mvn spring-boot:run

You might also want to use the useful operating system environment variable:

$ export MAVEN_OPTS=-Xmx1024m -XX:MaxPermSize=128M

19.4 Using the Gradle plugin

The Spring Boot Gradle plugin also includes a bootRun task which can be used to run your application in an exploded form. The bootRun task is added whenever you import the spring-boot-gradle-plugin:

$ gradle bootRun

You might also want to use this useful operating system environment variable:

$ export JAVA_OPTS=-Xmx1024m -XX:MaxPermSize=128M

19.5 Hot swapping

Since Spring Boot applications are just plain Java applications, JVM hot-swapping should work out of the box. JVM hot swapping is somewhat limited with the bytecode that it can replace, for a more complete solution JRebel or the Spring Loaded project can be used. The spring-boot-devtools module also includes support for quick application restarts.

See the Chapter 20, Developer tools section below and the Hot swapping “How-to” for details.

20. Developer tools

Spring Boot includes an additional set of tools that can make the application development experience a little more pleasant. The spring-boot-devtools module can be included in any project to provide additional development-time features. To include devtools support, simply add the module dependency to your build:

Maven. 

<dependencies>
    <dependency>
        <groupId>org.springframework.boot</groupId>
        <artifactId>spring-boot-devtools</artifactId>
        <optional>true</optional>
    </dependency>
</dependencies>

Gradle. 

dependencies {
    compile("org.springframework.boot:spring-boot-devtools")
}

[Note]Note

Developer tools are automatically disabled when running a fully packaged application. If your application is launched using java -jar or if it’s started using a special classloader, then it is considered a “production application”. Flagging the dependency as optional is a best practice that prevents devtools from being transitively applied to other modules using your project. Gradle does not support optional dependencies out-of-the-box so you may want to have a look to the propdeps-plugin in the meantime.

[Tip]Tip

If you want to ensure that devtools is never included in a production build, you can use the excludeDevtools build property to completely remove the JAR. The property is supported with both the Maven and Gradle plugins.

20.1 Property defaults

Several of the libraries supported by Spring Boot use caches to improve performance. For example, Thymeleaf will cache templates to save repeatedly parsing XML source files. Whilst caching is very beneficial in production, it can be counter productive during development. If you make a change to a template file in your IDE, you’ll likely want to immediately see the result.

Cache options are usually configured by settings in your application.properties file. For example, Thymeleaf offers the spring.thymeleaf.cache property. Rather than needing to set these properties manually, the spring-boot-devtools module will automatically apply sensible development-time configuration.

[Tip]Tip

For a complete list of the properties that are applied see DevToolsPropertyDefaultsPostProcessor.

20.2 Automatic restart

Applications that use spring-boot-devtools will automatically restart whenever files on the classpath change. This can be a useful feature when working in an IDE as it gives a very fast feedback loop for code changes. By default, any entry on the classpath that points to a folder will be monitored for changes. Note that certain resources such as static assets and view templates do not need to restart the application.

[Note]Note

You can also start your application via the supported build plugins (i.e. Maven and Gradle) as long as forking is enabled since DevTools need an isolated application classloader to operate properly. Gradle does this by default and you can force the Maven plugin to fork the process as follows:

<build>
    <plugins>
        <plugin>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-maven-plugin</artifactId>
            <configuration>
                <fork>true</fork>
            </configuration>
        </plugin>
    </plugins>
</build>
[Tip]Tip

Automatic restart works very well when used with LiveReload. See below for details. If you use JRebel automatic restarts will be disabled in favor of dynamic class reloading. Other devtools features (such as LiveReload and property overrides) can still be used.

[Note]Note

DevTools relies on the application context’s shutdown hook to close it during a restart. It will not work correctly if you have disabled the shutdown hook ( SpringApplication.setRegisterShutdownHook(false)).

[Note]Note

When deciding if an entry on the classpath should trigger a restart when it changes, DevTools automatically ignores projects named spring-boot, spring-boot-devtools, spring-boot-autoconfigure, spring-boot-actuator, and spring-boot-starter.

20.2.1 Excluding resources

Certain resources don’t necessarily need to trigger a restart when they are changed. For example, Thymeleaf templates can just be edited in-place. By default changing resources in /META-INF/maven, /META-INF/resources ,/resources ,/static ,/public or /templates will not trigger a restart but will trigger a live reload. If you want to customize these exclusions you can use the spring.devtools.restart.exclude property. For example, to exclude only /static and /public you would set the following:

spring.devtools.restart.exclude=static/**,public/**
[Tip]Tip

if you want to keep those defaults and add additional exclusions, use the spring.devtools.restart.additional-exclude property instead.

20.2.2 Watching additional paths

You may want your application to be restarted or reloaded when you make changes to files that are not on the classpath. To do so, use the spring.devtools.restart.additional-paths property to configure additional paths to watch for changes. You can use the spring.devtools.restart.exclude property described above to control whether changes beneath the additional paths will trigger a full restart or just a live reload.

20.2.3 Disabling restart

If you don’t want to use the restart feature you can disable it using the spring.devtools.restart.enabled property. In most cases you can set this in your application.properties (this will still initialize the restart classloader but it won’t watch for file changes).

If you need to completely disable restart support, for example, because it doesn’t work with a specific library, you need to set a System property before calling SpringApplication.run(…​). For example:

public static void main(String[] args) {
    System.setProperty("spring.devtools.restart.enabled", "false");
    SpringApplication.run(MyApp.class, args);
}

20.2.4 Using a trigger file

If you work with an IDE that continuously compiles changed files, you might prefer to trigger restarts only at specific times. To do this you can use a “trigger file”, which is a special file that must be modified when you want to actually trigger a restart check. Changing the file only triggers the check and the restart will only occur if Devtools has detected it has to do something. The trigger file could be updated manually, or via an IDE plugin.

To use a trigger file use the spring.devtools.restart.trigger-file property.

[Tip]Tip

You might want to set spring.devtools.restart.trigger-file as a global setting so that all your projects behave in the same way.

20.2.5 Customizing the restart classloader

As described in the Restart vs Reload section above, restart functionality is implemented by using two classloaders. For most applications this approach works well, however, sometimes it can cause classloading issues.

By default, any open project in your IDE will be loaded using the “restart” classloader, and any regular .jar file will be loaded using the “base” classloader. If you work on a multi-module project, and not each module is imported into your IDE, you may need to customize things. To do this you can create a META-INF/spring-devtools.properties file.

The spring-devtools.properties file can contain restart.exclude. and restart.include. prefixed properties. The include elements are items that should be pulled up into the “restart” classloader, and the exclude elements are items that should be pushed down into the “base” classloader. The value of the property is a regex pattern that will be applied to the classpath.

For example:

restart.exclude.companycommonlibs=/mycorp-common-[\\w-]+\.jar
restart.include.projectcommon=/mycorp-myproj-[\\w-]+\.jar
[Note]Note

All property keys must be unique. As long as a property starts with restart.include. or restart.exclude. it will be considered.

[Tip]Tip

All META-INF/spring-devtools.properties from the classpath will be loaded. You can package files inside your project, or in the libraries that the project consumes.

20.2.6 Known limitations

Restart functionality does not work well with objects that are deserialized using a standard ObjectInputStream. If you need to deserialize data, you may need to use Spring’s ConfigurableObjectInputStream in combination with Thread.currentThread().getContextClassLoader().

Unfortunately, several third-party libraries deserialize without considering the context classloader. If you find such a problem, you will need to request a fix with the original authors.

20.3 LiveReload

The spring-boot-devtools module includes an embedded LiveReload server that can be used to trigger a browser refresh when a resource is changed. LiveReload browser extensions are freely available for Chrome, Firefox and Safari from livereload.com.

If you don’t want to start the LiveReload server when your application runs you can set the spring.devtools.livereload.enabled property to false.

[Note]Note

You can only run one LiveReload server at a time, if you start multiple applications from your IDE only the first will have livereload support.

20.4 Global settings

You can configure global devtools settings by adding a file named .spring-boot-devtools.properties to your $HOME folder (note that the filename starts with “.”). Any properties added to this file will apply to all Spring Boot applications on your machine that use devtools. For example, to configure restart to always use a trigger file, you would add the following:

~/.spring-boot-devtools.properties. 

spring.devtools.reload.trigger-file=.reloadtrigger

20.5 Remote applications

The Spring Boot developer tools are not just limited to local development. You can also use several features when running applications remotely. Remote support is opt-in, to enable it you need to set a spring.devtools.remote.secret property. For example:

spring.devtools.remote.secret=mysecret
[Warning]Warning

Enabling spring-boot-devtools on a remote application is a security risk. You should never enable support on a production deployment.

Remote devtools support is provided in two parts; there is a server side endpoint that accepts connections, and a client application that you run in your IDE. The server component is automatically enabled when the spring.devtools.remote.secret property is set. The client component must be launched manually.

20.5.1 Running the remote client application

The remote client application is designed to be run from within you IDE. You need to run org.springframework.boot.devtools.RemoteSpringApplication using the same classpath as the remote project that you’re connecting to. The non-option argument passed to the application should be the remote URL that you are connecting to.

For example, if you are using Eclipse or STS, and you have a project named my-app that you’ve deployed to Cloud Foundry, you would do the following:

  • Select Run Configurations…​ from the Run menu.
  • Create a new Java Application “launch configuration”.
  • Browse for the my-app project.
  • Use org.springframework.boot.devtools.RemoteSpringApplication as the main class.
  • Add https://myapp.cfapps.io to the Program arguments (or whatever your remote URL is).

A running remote client will look like this:

  .   ____          _                                              __ _ _
 /\\ / ___'_ __ _ _(_)_ __  __ _          ___               _      \ \ \ \
( ( )\___ | '_ | '_| | '_ \/ _` |        | _ \___ _ __  ___| |_ ___ \ \ \ \
 \\/  ___)| |_)| | | | | || (_| []::::::[]   / -_) '  \/ _ \  _/ -_) ) ) ) )
  '  |____| .__|_| |_|_| |_\__, |        |_|_\___|_|_|_\___/\__\___|/ / / /
 =========|_|==============|___/===================================/_/_/_/
 :: Spring Boot Remote :: 1.4.1.RELEASE

2015-06-10 18:25:06.632  INFO 14938 --- [           main] o.s.b.devtools.RemoteSpringApplication   : Starting RemoteSpringApplication on pwmbp with PID 14938 (/Users/pwebb/projects/spring-boot/code/spring-boot-devtools/target/classes started by pwebb in /Users/pwebb/projects/spring-boot/code/spring-boot-samples/spring-boot-sample-devtools)
2015-06-10 18:25:06.671  INFO 14938 --- [           main] s.c.a.AnnotationConfigApplicationContext : Refreshing org.springframework.context.annotation.AnnotationConfigApplicatio[email protected]: startup date [Wed Jun 10 18:25:06 PDT 2015]; root of context hierarchy
2015-06-10 18:25:07.043  WARN 14938 --- [           main] o.s.b.d.r.c.RemoteClientConfiguration    : The connection to http://localhost:8080 is insecure. You should use a URL starting with 'https://'.
2015-06-10 18:25:07.074  INFO 14938 --- [           main] o.s.b.d.a.OptionalLiveReloadServer       : LiveReload server is running on port 35729
2015-06-10 18:25:07.130  INFO 14938 --- [           main] o.s.b.devtools.RemoteSpringApplication   : Started RemoteSpringApplication in 0.74 seconds (JVM running for 1.105)
[Note]Note

Because the remote client is using the same classpath as the real application it can directly read application properties. This is how the spring.devtools.remote.secret property is read and passed to the server for authentication.

[Tip]Tip

It’s always advisable to use https:// as the connection protocol so that traffic is encrypted and passwords cannot be intercepted.

[Tip]Tip

If you need to use a proxy to access the remote application, configure the spring.devtools.remote.proxy.host and spring.devtools.remote.proxy.port properties.

20.5.2 Remote update

The remote client will monitor your application classpath for changes in the same way as the local restart. Any updated resource will be pushed to the remote application and (if required) trigger a restart. This can be quite helpful if you are iterating on a feature that uses a cloud service that you don’t have locally. Generally remote updates and restarts are much quicker than a full rebuild and deploy cycle.

[Note]Note

Files are only monitored when the remote client is running. If you change a file before starting the remote client, it won’t be pushed to the remote server.

20.5.3 Remote debug tunnel

Java remote debugging is useful when diagnosing issues on a remote application. Unfortunately, it’s not always possible to enable remote debugging when your application is deployed outside of your data center. Remote debugging can also be tricky to setup if you are using a container based technology such as Docker.

To help work around these limitations, devtools supports tunneling of remote debug traffic over HTTP. The remote client provides a local server on port 8000 that you can attach a remote debugger to. Once a connection is established, debug traffic is sent over HTTP to the remote application. You can use the spring.devtools.remote.debug.local-port property if you want to use a different port.

You’ll need to ensure that your remote application is started with remote debugging enabled. Often this can be achieved by configuring JAVA_OPTS. For example, with Cloud Foundry you can add the following to your manifest.yml:

---
  env:
    JAVA_OPTS: "-Xdebug -Xrunjdwp:server=y,transport=dt_socket,suspend=n"
[Tip]Tip

Notice that you don’t need to pass an address=NNNN option to -Xrunjdwp. If omitted Java will simply pick a random free port.

[Note]Note

Debugging a remote service over the Internet can be slow and you might need to increase timeouts in your IDE. For example, in Eclipse you can select JavaDebug from Preferences…​ and change the Debugger timeout (ms) to a more suitable value (60000 works well in most situations).

21. Packaging your application for production

Executable jars can be used for production deployment. As they are self-contained, they are also ideally suited for cloud-based deployment.

For additional “production ready” features, such as health, auditing and metric REST or JMX end-points; consider adding spring-boot-actuator. See Part V, “Spring Boot Actuator: Production-ready features” for details.

22. What to read next

You should now have good understanding of how you can use Spring Boot along with some best practices that you should follow. You can now go on to learn about specific Spring Boot features in depth, or you could skip ahead and read about the “production ready” aspects of Spring Boot.

Part IV. Spring Boot features

This section dives into the details of Spring Boot. Here you can learn about the key features that you will want to use and customize. If you haven’t already, you might want to read the Part II, “Getting started” and Part III, “Using Spring Boot” sections so that you have a good grounding of the basics.

23. SpringApplication

The SpringApplication class provides a convenient way to bootstrap a Spring application that will be started from a main() method. In many situations you can just delegate to the static SpringApplication.run method:

public static void main(String[] args) {
    SpringApplication.run(MySpringConfiguration.class, args);
}

When your application starts you should see something similar to the following:

  .   ____          _            __ _ _
 /\\ / ___'_ __ _ _(_)_ __  __ _ \ \ \ \
( ( )\___ | '_ | '_| | '_ \/ _` | \ \ \ \
 \\/  ___)| |_)| | | | | || (_| |  ) ) ) )
  '  |____| .__|_| |_|_| |_\__, | / / / /
 =========|_|==============|___/=/_/_/_/
 :: Spring Boot ::   v1.4.1.RELEASE

2013-07-31 00:08:16.117  INFO 56603 --- [           main] o.s.b.s.app.SampleApplication            : Starting SampleApplication v0.1.0 on mycomputer with PID 56603 (/apps/myapp.jar started by pwebb)
2013-07-31 00:08:16.166  INFO 56603 --- [           main] ationConfigEmbeddedWebApplicationContext : Refreshing org.springframework.boot.context.embedded.AnnotationConfigEmbedde[email protected]: startup date [Wed Jul 31 00:08:16 PDT 2013]; root of context hierarchy
2014-03-04 13:09:54.912  INFO 41370 --- [           main] .t.TomcatEmbeddedServletContainerFactory : Server initialized with port: 8080
2014-03-04 13:09:56.501  INFO 41370 --- [           main] o.s.b.s.app.SampleApplication            : Started SampleApplication in 2.992 seconds (JVM running for 3.658)

By default INFO logging messages will be shown, including some relevant startup details such as the user that launched the application.

23.1 Startup failure

If your application fails to start, registered FailureAnalyzers get a chance to provide a dedicated error message and a concrete action to fix the problem. For instance if you start a web application on port 8080 and that port is already in use, you should see something similar to the following:

***************************
APPLICATION FAILED TO START
***************************

Description:

Embedded servlet container failed to start. Port 8080 was already in use.

Action:

Identify and stop the process that's listening on port 8080 or configure this application to listen on another port.
[Note]Note

Spring Boot provides numerous FailureAnalyzer implementations and you can add your own very easily.

If no failure analyzers are able to handle the exception, you can still display the full auto-configuration report to better understand what went wrong. To do so you need to enable the debug property or enable DEBUG logging for org.springframework.boot.autoconfigure.logging.AutoConfigurationReportLoggingInitializer.

For instance, if you are running your application using java -jar you can enable the debug property as follows:

$ java -jar myproject-0.0.1-SNAPSHOT.jar --debug

23.2 Customizing the Banner

The banner that is printed on start up can be changed by adding a banner.txt file to your classpath, or by setting banner.location to the location of such a file. If the file has an unusual encoding you can set banner.charset (default is UTF-8). In addition to a text file, you can also add a banner.gif, banner.jpg or banner.png image file to your classpath, or set a banner.image.location property. Images will be converted into an ASCII art representation and printed above any text banner.

Inside your banner.txt file you can use any of the following placeholders:

Table 23.1. Banner variables

VariableDescription

${application.version}

The version number of your application as declared in MANIFEST.MF. For example Implementation-Version: 1.0 is printed as 1.0.

${application.formatted-version}

The version number of your application as declared in MANIFEST.MF formatted for display (surrounded with brackets and prefixed with v). For example (v1.0).

${spring-boot.version}

The Spring Boot version that you are using. For example 1.4.1.RELEASE.

${spring-boot.formatted-version}

The Spring Boot version that you are using formatted for display (surrounded with brackets and prefixed with v). For example (v1.4.1.RELEASE).

${Ansi.NAME} (or ${AnsiColor.NAME}, ${AnsiBackground.NAME}, ${AnsiStyle.NAME})

Where NAME is the name of an ANSI escape code. See AnsiPropertySource for details.

${application.title}

The title of your application as declared in MANIFEST.MF. For example Implementation-Title: MyApp is printed as MyApp.


[Tip]Tip

The SpringApplication.setBanner(…​) method can be used if you want to generate a banner programmatically. Use the org.springframework.boot.Banner interface and implement your own printBanner() method.

You can also use the spring.main.banner-mode property to determine if the banner has to be printed on System.out (console), using the configured logger (log) or not at all (off).

The printed banner will be registered as a singleton bean under the name springBootBanner.

[Note]Note

YAML maps off to false so make sure to add quotes if you want to disable the banner in your application.

spring:
    main:
        banner-mode: "off"

23.3 Customizing SpringApplication

If the SpringApplication defaults aren’t to your taste you can instead create a local instance and customize it. For example, to turn off the banner you would write:

public static void main(String[] args) {
    SpringApplication app = new SpringApplication(MySpringConfiguration.class);
    app.setBannerMode(Banner.Mode.OFF);
    app.run(args);
}
[Note]Note

The constructor arguments passed to SpringApplication are configuration sources for spring beans. In most cases these will be references to @Configuration classes, but they could also be references to XML configuration or to packages that should be scanned.

It is also possible to configure the SpringApplication using an application.properties file. See Chapter 24, Externalized Configuration for details.

For a complete list of the configuration options, see the SpringApplication Javadoc.

23.4 Fluent builder API

If you need to build an ApplicationContext hierarchy (multiple contexts with a parent/child relationship), or if you just prefer using a ‘fluent’ builder API, you can use the SpringApplicationBuilder.

The SpringApplicationBuilder allows you to chain together multiple method calls, and includes parent and child methods that allow you to create a hierarchy.

For example:

new SpringApplicationBuilder()
        .sources(Parent.class)
        .child(Application.class)
        .bannerMode(Banner.Mode.OFF)
        .run(args);
[Note]Note

There are some restrictions when creating an ApplicationContext hierarchy, e.g. Web components must be contained within the child context, and the same Environment will be used for both parent and child contexts. See the SpringApplicationBuilder Javadoc for full details.

23.5 Application events and listeners

In addition to the usual Spring Framework events, such as ContextRefreshedEvent, a SpringApplication sends some additional application events.

[Note]Note

Some events are actually triggered before the ApplicationContext is created so you cannot register a listener on those as a @Bean. You can register them via the SpringApplication.addListeners(…​) or SpringApplicationBuilder.listeners(…​) methods.

If you want those listeners to be registered automatically regardless of the way the application is created you can add a META-INF/spring.factories file to your project and reference your listener(s) using the org.springframework.context.ApplicationListener key.

org.springframework.context.ApplicationListener=com.example.project.MyListener

Application events are sent in the following order, as your application runs:

  1. An ApplicationStartedEvent is sent at the start of a run, but before any processing except the registration of listeners and initializers.
  2. An ApplicationEnvironmentPreparedEvent is sent when the Environment to be used in the context is known, but before the context is created.
  3. An ApplicationPreparedEvent is sent just before the refresh is started, but after bean definitions have been loaded.
  4. An ApplicationReadyEvent is sent after the refresh and any related callbacks have been processed to indicate the application is ready to service requests.
  5. An ApplicationFailedEvent is sent if there is an exception on startup.
[Tip]Tip

You often won’t need to use application events, but it can be handy to know that they exist. Internally, Spring Boot uses events to handle a variety of tasks.

23.6 Web environment

A SpringApplication will attempt to create the right type of ApplicationContext on your behalf. By default, an AnnotationConfigApplicationContext or AnnotationConfigEmbeddedWebApplicationContext will be used, depending on whether you are developing a web application or not.

The algorithm used to determine a ‘web environment’ is fairly simplistic (based on the presence of a few classes). You can use setWebEnvironment(boolean webEnvironment) if you need to override the default.

It is also possible to take complete control of the ApplicationContext type that will be used by calling setApplicationContextClass(…​).

[Tip]Tip

It is often desirable to call setWebEnvironment(false) when using SpringApplication within a JUnit test.

23.7 Accessing application arguments

If you need to access the application arguments that were passed to SpringApplication.run(…​) you can inject a org.springframework.boot.ApplicationArguments bean. The ApplicationArguments interface provides access to both the raw String[] arguments as well as parsed option and non-option arguments:

import org.springframework.boot.*
import org.springframework.beans.factory.annotation.*
import org.springframework.stereotype.*

@Component
public class MyBean {

    @Autowired
    public MyBean(ApplicationArguments args) {
        boolean debug = args.containsOption("debug");
        List<String> files = args.getNonOptionArgs();
        // if run with "--debug logfile.txt" debug=true, files=["logfile.txt"]
    }

}
[Tip]Tip

Spring Boot will also register a CommandLinePropertySource with the Spring Environment. This allows you to also inject single application arguments using the @Value annotation.

23.8 Using the ApplicationRunner or CommandLineRunner

If you need to run some specific code once the SpringApplication has started, you can implement the ApplicationRunner or CommandLineRunner interfaces. Both interfaces work in the same way and offer a single run method which will be called just before SpringApplication.run(…​) completes.

The CommandLineRunner interfaces provides access to application arguments as a simple string array, whereas the ApplicationRunner uses the ApplicationArguments interface discussed above.

import org.springframework.boot.*
import org.springframework.stereotype.*

@Component
public class MyBean implements CommandLineRunner {

    public void run(String... args) {
        // Do something...
    }

}

You can additionally implement the org.springframework.core.Ordered interface or use the org.springframework.core.annotation.Order annotation if several CommandLineRunner or ApplicationRunner beans are defined that must be called in a specific order.

23.9 Application exit

Each SpringApplication will register a shutdown hook with the JVM to ensure that the ApplicationContext is closed gracefully on exit. All the standard Spring lifecycle callbacks (such as the DisposableBean interface, or the @PreDestroy annotation) can be used.

In addition, beans may implement the org.springframework.boot.ExitCodeGenerator interface if they wish to return a specific exit code when the application ends.

23.10 Admin features

It is possible to enable admin-related features for the application by specifying the spring.application.admin.enabled property. This exposes the SpringApplicationAdminMXBean on the platform MBeanServer. You could use this feature to administer your Spring Boot application remotely. This could also be useful for any service wrapper implementation.

[Tip]Tip

If you want to know on which HTTP port the application is running, get the property with key local.server.port.

[Note]Note

Take care when enabling this feature as the MBean exposes a method to shutdown the application.

24. Externalized Configuration

Spring Boot allows you to externalize your configuration so you can work with the same application code in different environments. You can use properties files, YAML files, environment variables and command-line arguments to externalize configuration. Property values can be injected directly into your beans using the @Value annotation, accessed via Spring’s Environment abstraction or bound to structured objects via @ConfigurationProperties.

Spring Boot uses a very particular PropertySource order that is designed to allow sensible overriding of values. Properties are considered in the following order:

  1. Devtools global settings properties on your home directory (~/.spring-boot-devtools.properties when devtools is active).
  2. @TestPropertySource annotations on your tests.
  3. @SpringBootTest#properties annotation attribute on your tests.
  4. Command line arguments.
  5. Properties from SPRING_APPLICATION_JSON (inline JSON embedded in an environment variable or system property)
  6. ServletConfig init parameters.
  7. ServletContext init parameters.
  8. JNDI attributes from java:comp/env.
  9. Java System properties (System.getProperties()).
  10. OS environment variables.
  11. A RandomValuePropertySource that only has properties in random.*.
  12. Profile-specific application properties outside of your packaged jar (application-{profile}.properties and YAML variants)
  13. Profile-specific application properties packaged inside your jar (application-{profile}.properties and YAML variants)
  14. Application properties outside of your packaged jar (application.properties and YAML variants).
  15. Application properties packaged inside your jar (application.properties and YAML variants).
  16. @PropertySource annotations on your @Configuration classes.
  17. Default properties (specified using SpringApplication.setDefaultProperties).

To provide a concrete example, suppose you develop a @Component that uses a name property:

import org.springframework.stereotype.*
import org.springframework.beans.factory.annotation.*

@Component
public class MyBean {

    @Value("${name}")
    private String name;

    // ...

}

On your application classpath (e.g. inside your jar) you can have an application.properties that provides a sensible default property value for name. When running in a new environment, an application.properties can be provided outside of your jar that overrides the name; and for one-off testing, you can launch with a specific command line switch (e.g. java -jar app.jar --name="Spring").

[Tip]Tip

The SPRING_APPLICATION_JSON properties can be supplied on the command line with an environment variable. For example in a UN*X shell:

$ SPRING_APPLICATION_JSON='{"foo":{"bar":"spam"}}' java -jar myapp.jar

In this example you will end up with foo.bar=spam in the Spring Environment. You can also supply the JSON as spring.application.json in a System variable:

$ java -Dspring.application.json='{"foo":"bar"}' -jar myapp.jar

or command line argument:

$ java -jar myapp.jar --spring.application.json='{"foo":"bar"}'

or as a JNDI variable java:comp/env/spring.application.json.

24.1 Configuring random values

The RandomValuePropertySource is useful for injecting random values (e.g. into secrets or test cases). It can produce integers, longs, uuids or strings, e.g.

my.secret=${random.value}
my.number=${random.int}
my.bignumber=${random.long}
my.uuid=${random.uuid}
my.number.less.than.ten=${random.int(10)}
my.number.in.range=${random.int[1024,65536]}

The random.int* syntax is OPEN value (,max) CLOSE where the OPEN,CLOSE are any character and value,max are integers. If max is provided then value is the minimum value and max is the maximum (exclusive).

24.2 Accessing command line properties

By default SpringApplication will convert any command line option arguments (starting with ‘--’, e.g. --server.port=9000) to a property and add it to the Spring Environment. As mentioned above, command line properties always take precedence over other property sources.

If you don’t want command line properties to be added to the Environment you can disable them using SpringApplication.setAddCommandLineProperties(false).

24.3 Application property files

SpringApplication will load properties from application.properties files in the following locations and add them to the Spring Environment:

  1. A /config subdirectory of the current directory.
  2. The current directory
  3. A classpath /config package
  4. The classpath root

The list is ordered by precedence (properties defined in locations higher in the list override those defined in lower locations).

[Note]Note

You can also use YAML ('.yml') files as an alternative to '.properties'.

If you don’t like application.properties as the configuration file name you can switch to another by specifying a spring.config.name environment property. You can also refer to an explicit location using the spring.config.location environment property (comma-separated list of directory locations, or file paths).

$ java -jar myproject.jar --spring.config.name=myproject

or

$ java -jar myproject.jar --spring.config.location=classpath:/default.properties,classpath:/override.properties
[Warning]Warning

spring.config.name and spring.config.location are used very early to determine which files have to be loaded so they have to be defined as an environment property (typically OS env, system property or command line argument).

If spring.config.location contains directories (as opposed to files) they should end in / (and will be appended with the names generated from spring.config.name before being loaded, including profile-specific file names). Files specified in spring.config.location are used as-is, with no support for profile-specific variants, and will be overridden by any profile-specific properties.

The default search path classpath:,classpath:/config,file:,file:config/ is always used, irrespective of the value of spring.config.location. This search path is ordered from lowest to highest precedence (file:config/ wins). If you do specify your own locations, they take precedence over all of the default locations and use the same lowest to highest precedence ordering. In that way you can set up default values for your application in application.properties (or whatever other basename you choose with spring.config.name) and override it at runtime with a different file, keeping the defaults.

[Note]Note

If you use environment variables rather than system properties, most operating systems disallow period-separated key names, but you can use underscores instead (e.g. SPRING_CONFIG_NAME instead of spring.config.name).

[Note]Note

If you are running in a container then JNDI properties (in java:comp/env) or servlet context initialization parameters can be used instead of, or as well as, environment variables or system properties.

24.4 Profile-specific properties

In addition to application.properties files, profile-specific properties can also be defined using the naming convention application-{profile}.properties. The Environment has a set of default profiles (by default [default]) which are used if no active profiles are set (i.e. if no profiles are explicitly activated then properties from application-default.properties are loaded).

Profile-specific properties are loaded from the same locations as standard application.properties, with profile-specific files always overriding the non-specific ones irrespective of whether the profile-specific files are inside or outside your packaged jar.

If several profiles are specified, a last wins strategy applies. For example, profiles specified by the spring.profiles.active property are added after those configured via the SpringApplication API and therefore take precedence.

[Note]Note

If you have specified any files in spring.config.location, profile-specific variants of those files will not be considered. Use directories in`spring.config.location` if you also want to also use profile-specific properties.

24.5 Placeholders in properties

The values in application.properties are filtered through the existing Environment when they are used so you can refer back to previously defined values (e.g. from System properties).

app.name=MyApp
app.description=${app.name} is a Spring Boot application
[Tip]Tip

You can also use this technique to create ‘short’ variants of existing Spring Boot properties. See the Section 69.4, “Use ‘short’ command line arguments” how-to for details.

24.6 Using YAML instead of Properties

YAML is a superset of JSON, and as such is a very convenient format for specifying hierarchical configuration data. The SpringApplication class will automatically support YAML as an alternative to properties whenever you have the SnakeYAML library on your classpath.

[Note]Note

If you use ‘Starters’ SnakeYAML will be automatically provided via spring-boot-starter.

24.6.1 Loading YAML

Spring Framework provides two convenient classes that can be used to load YAML documents. The YamlPropertiesFactoryBean will load YAML as Properties and the YamlMapFactoryBean will load YAML as a Map.

For example, the following YAML document:

environments:
    dev:
        url: http://dev.bar.com
        name: Developer Setup
    prod:
        url: http://foo.bar.com
        name: My Cool App

Would be transformed into these properties:

environments.dev.url=http://dev.bar.com
environments.dev.name=Developer Setup
environments.prod.url=http://foo.bar.com
environments.prod.name=My Cool App

YAML lists are represented as property keys with [index] dereferencers, for example this YAML:

my:
   servers:
       - dev.bar.com
       - foo.bar.com

Would be transformed into these properties:

my.servers[0]=dev.bar.com
my.servers[1]=foo.bar.com

To bind to properties like that using the Spring DataBinder utilities (which is what @ConfigurationProperties does) you need to have a property in the target bean of type java.util.List (or Set) and you either need to provide a setter, or initialize it with a mutable value, e.g. this will bind to the properties above

@ConfigurationProperties(prefix="my")
public class Config {

    private List<String> servers = new ArrayList<String>();

    public List<String> getServers() {
        return this.servers;
    }
}

24.6.2 Exposing YAML as properties in the Spring Environment

The YamlPropertySourceLoader class can be used to expose YAML as a PropertySource in the Spring Environment. This allows you to use the familiar @Value annotation with placeholders syntax to access YAML properties.

24.6.3 Multi-profile YAML documents

You can specify multiple profile-specific YAML documents in a single file by using a spring.profiles key to indicate when the document applies. For example:

server:
    address: 192.168.1.100
---
spring:
    profiles: development
server:
    address: 127.0.0.1
---
spring:
    profiles: production
server:
    address: 192.168.1.120

In the example above, the server.address property will be 127.0.0.1 if the development profile is active. If the development and production profiles are not enabled, then the value for the property will be 192.168.1.100.

The default profiles are activated if none are explicitly active when the application context starts. So in this YAML we set a value for security.user.password that is only available in the "default" profile:

server:
  port: 8000
---
spring:
  profiles: default
security:
  user:
    password: weak

whereas in this example, the password is always set because it isn’t attached to any profile, and it would have to be explicitly reset in all other profiles as necessary:

server:
  port: 8000
security:
  user:
    password: weak

Spring profiles designated using the "spring.profiles" element may optionally be negated using the ! character. If both negated and non-negated profiles are specified for a single document, at least one non-negated profile must match and no negated profiles may match.

24.6.4 YAML shortcomings

YAML files can’t be loaded via the @PropertySource annotation. So in the case that you need to load values that way, you need to use a properties file.

24.6.5 Merging YAML lists

As we have seen above, any YAML content is ultimately transformed to properties. That process may be counter intuitive when overriding “list” properties via a profile.

For example, assume a MyPojo object with name and description attributes that are null by default. Let’s expose a list of MyPojo from FooProperties:

@ConfigurationProperties("foo")
public class FooProperties {

    private final List<MyPojo> list = new ArrayList<>();

    public List<MyPojo> getList() {
        return this.list;
    }

}

Consider the following configuration:

foo:
  list:
    - name: my name
      description: my description
---
spring:
  profiles: dev
foo:
  list:
    - name: my another name

If the dev profile isn’t active, FooProperties.list will contain one MyPojo entry as defined above. If the dev profile is enabled however, the list will still only contain one entry (with name “my another name” and description null). This configuration will not add a second MyPojo instance to the list, and it won’t merge the items.

When a collection is specified in multiple profiles, the one with highest priority is used (and only that one):

foo:
  list:
    - name: my name
      description: my description
    - name: another name
      description: another description
---
spring:
  profiles: dev
foo:
  list:
     - name: my another name

In the example above, considering that the dev profile is active, FooProperties.list will contain one MyPojo entry (with name “my another name” and description null).

24.7 Type-safe Configuration Properties

Using the @Value("${property}") annotation to inject configuration properties can sometimes be cumbersome, especially if you are working with multiple properties or your data is hierarchical in nature. Spring Boot provides an alternative method of working with properties that allows strongly typed beans to govern and validate the configuration of your application. For example:

@ConfigurationProperties(prefix="connection")
public class ConnectionProperties {

    private String username;

    private InetAddress remoteAddress;

    // ... getters and setters

}
[Note]Note

The getters and setters are advisable, since binding is via standard Java Beans property descriptors, just like in Spring MVC. They are mandatory for immutable types or those that are directly coercible from String. As long as they are initialized, maps, collections, and arrays need a getter but not necessarily a setter since they can be mutated by the binder. If there is a setter, Maps, collections, and arrays can be created. Maps and collections can be expanded with only a getter, whereas arrays require a setter. Nested POJO properties can also be created (so a setter is not mandatory) if they have a default constructor, or a constructor accepting a single value that can be coerced from String. Some people use Project Lombok to add getters and setters automatically.

You also need to list the properties classes to register in the @EnableConfigurationProperties annotation:

@Configuration
@EnableConfigurationProperties(ConnectionProperties.class)
public class MyConfiguration {
}
[Note]Note

When @ConfigurationProperties bean is registered that way, the bean will have a conventional name: <prefix>-<fqn>, where <prefix> is the environment key prefix specified in the @ConfigurationProperties annotation and <fqn> the fully qualified name of the bean. If the annotation does not provide any prefix, only the fully qualified name of the bean is used.

The bean name in the example above will be connection-com.example.ConnectionProperties, assuming that ConnectionProperties sits in the com.example package.

Even if the configuration above will create a regular bean for ConnectionProperties, we recommend that @ConfigurationProperties only deal with the environment and in particular does not inject other beans from the context. Having said that, The @EnableConfigurationProperties annotation is also automatically applied to your project so that any existing bean annotated with @ConfigurationProperties will be configured from the Environment properties. You could shortcut MyConfiguration above by making sure ConnectionProperties is a already a bean:

@Component
@ConfigurationProperties(prefix="connection")
public class ConnectionProperties {

    // ... getters and setters

}

This style of configuration works particularly well with the SpringApplication external YAML configuration:

# application.yml

connection:
    username: admin
    remoteAddress: 192.168.1.1

# additional configuration as required

To work with @ConfigurationProperties beans you can just inject them in the same way as any other bean.

@Service
public class MyService {

    private final ConnectionProperties connection;

    @Autowired
    public MyService(ConnectionProperties connection) {
        this.connection = connection;
    }

     //...

    @PostConstruct
    public void openConnection() {
        Server server = new Server();
        this.connection.configure(server);
    }

}
[Tip]Tip

Using @ConfigurationProperties also allows you to generate meta-data files that can be used by IDEs. See the Appendix B, Configuration meta-data appendix for details.

24.7.1 Third-party configuration

As well as using @ConfigurationProperties to annotate a class, you can also use it on public @Bean methods. This can be particularly useful when you want to bind properties to third-party components that are outside of your control.

To configure a bean from the Environment properties, add @ConfigurationProperties to its bean registration:

@ConfigurationProperties(prefix = "foo")
@Bean
public FooComponent fooComponent() {
    ...
}

Any property defined with the foo prefix will be mapped onto that FooComponent bean in a similar manner as the ConnectionProperties example above.

24.7.2 Relaxed binding

Spring Boot uses some relaxed rules for binding Environment properties to @ConfigurationProperties beans, so there doesn’t need to be an exact match between the Environment property name and the bean property name. Common examples where this is useful include dashed separated (e.g. context-path binds to contextPath), and capitalized (e.g. PORT binds to port) environment properties.

For example, given the following @ConfigurationProperties class:

@ConfigurationProperties(prefix="person")
public class OwnerProperties {

    private String firstName;

    public String getFirstName() {
        return this.firstName;
    }

    public void setFirstName(String firstName) {
        this.firstName = firstName;
    }

}

The following properties names can all be used:

Table 24.1. relaxed binding

PropertyNote

person.firstName

Standard camel case syntax.

person.first-name

Dashed notation, recommended for use in .properties and .yml files.

person.first_name

Underscore notation, alternative format for use in .properties and .yml files.

PERSON_FIRST_NAME

Upper case format. Recommended when using a system environment variables.


24.7.3 Properties conversion

Spring will attempt to coerce the external application properties to the right type when it binds to the @ConfigurationProperties beans. If you need custom type conversion you can provide a ConversionService bean (with bean id conversionService) or custom property editors (via a CustomEditorConfigurer bean) or custom Converters (with bean definitions annotated as @ConfigurationPropertiesBinding).

[Note]Note

As this bean is requested very early during the application lifecycle, make sure to limit the dependencies that your ConversionService is using. Typically, any dependency that you require may not be fully initialized at creation time. You may want to rename your custom ConversionService if it’s not required for configuration keys coercion and only rely on custom converters qualified with @ConfigurationPropertiesBinding.

24.7.4 @ConfigurationProperties Validation

Spring Boot will attempt to validate external configuration, by default using JSR-303 (if it is on the classpath). You can simply add JSR-303 javax.validation constraint annotations to your @ConfigurationProperties class:

@ConfigurationProperties(prefix="connection")
public class ConnectionProperties {

    @NotNull
    private InetAddress remoteAddress;

    // ... getters and setters

}

In order to validate values of nested properties, you must annotate the associated field as @Valid to trigger its validation. For example, building upon the above ConnectionProperties example:

@ConfigurationProperties(prefix="connection")
public class ConnectionProperties {

    @NotNull
    @Valid
    private RemoteAddress remoteAddress;

    // ... getters and setters

    public static class RemoteAddress {

        @NotEmpty
        public String hostname;

        // ... getters and setters

    }

}

You can also add a custom Spring Validator by creating a bean definition called configurationPropertiesValidator. The @Bean method should be declared static. The configuration properties validator is created very early in the application’s lifecycle and declaring the @Bean method as static allows the bean to be created without having to instantiate the @Configuration class. This avoids any problems that may be caused by early instantiation. There is a property validation sample so you can see how to set things up.

[Tip]Tip

The spring-boot-actuator module includes an endpoint that exposes all @ConfigurationProperties beans. Simply point your web browser to /configprops or use the equivalent JMX endpoint. See the Production ready features. section for details.

24.7.5 @ConfigurationProperties vs. @Value

@Value is a core container feature and it does not provide the same features as type-safe Configuration Properties. The table below summarizes the features that are supported by @ConfigurationProperties and @Value:

Feature@ConfigurationProperties@Value

Relaxed binding

Yes

No

Meta-data support

Yes

No

SpEL evaluation

No

Yes

If you define a set of configuration keys for your own components, we recommend you to group them in a POJO annotated with @ConfigurationProperties. Please also be aware that since @Value does not support relaxed binding, it isn’t a great candidate if you need to provide the value using environment variables.

Finally, while you can write a SpEL expression in @Value, such expressions are not processed from Application property files.

25. Profiles

Spring Profiles provide a way to segregate parts of your application configuration and make it only available in certain environments. Any @Component or @Configuration can be marked with @Profile to limit when it is loaded:

@Configuration
@Profile("production")
public class ProductionConfiguration {

    // ...

}

In the normal Spring way, you can use a spring.profiles.active Environment property to specify which profiles are active. You can specify the property in any of the usual ways, for example you could include it in your application.properties:

spring.profiles.active=dev,hsqldb

or specify on the command line using the switch --spring.profiles.active=dev,hsqldb.

25.1 Adding active profiles

The spring.profiles.active property follows the same ordering rules as other properties, the highest PropertySource will win. This means that you can specify active profiles in application.properties then replace them using the command line switch.

Sometimes it is useful to have profile-specific properties that add to the active profiles rather than replace them. The spring.profiles.include property can be used to unconditionally add active profiles. The SpringApplication entry point also has a Java API for setting additional profiles (i.e. on top of those activated by the spring.profiles.active property): see the setAdditionalProfiles() method.

For example, when an application with following properties is run using the switch --spring.profiles.active=prod the proddb and prodmq profiles will also be activated:

---
my.property: fromyamlfile
---
spring.profiles: prod
spring.profiles.include: proddb,prodmq
[Note]Note

Remember that the spring.profiles property can be defined in a YAML document to determine when this particular document is included in the configuration. See Section 69.7, “Change configuration depending on the environment” for more details.

25.2 Programmatically setting profiles

You can programmatically set active profiles by calling SpringApplication.setAdditionalProfiles(…​) before your application runs. It is also possible to activate profiles using Spring’s ConfigurableEnvironment interface.

25.3 Profile-specific configuration files

Profile-specific variants of both application.properties (or application.yml) and files referenced via @ConfigurationProperties are considered as files are loaded. See Section 24.4, “Profile-specific properties” for details.

26. Logging

Spring Boot uses Commons Logging for all internal logging, but leaves the underlying log implementation open. Default configurations are provided for Java Util Logging, Log4J2 and Logback. In each case loggers are pre-configured to use console output with optional file output also available.

By default, If you use the ‘Starters’, Logback will be used for logging. Appropriate Logback routing is also included to ensure that dependent libraries that use Java Util Logging, Commons Logging, Log4J or SLF4J will all work correctly.

[Tip]Tip

There are a lot of logging frameworks available for Java. Don’t worry if the above list seems confusing. Generally you won’t need to change your logging dependencies and the Spring Boot defaults will work just fine.

26.1 Log format

The default log output from Spring Boot looks like this:

2014-03-05 10:57:51.112  INFO 45469 --- [           main] org.apache.catalina.core.StandardEngine  : Starting Servlet Engine: Apache Tomcat/7.0.52
2014-03-05 10:57:51.253  INFO 45469 --- [ost-startStop-1] o.a.c.c.C.[Tomcat].[localhost].[/]       : Initializing Spring embedded WebApplicationContext
2014-03-05 10:57:51.253  INFO 45469 --- [ost-startStop-1] o.s.web.context.ContextLoader            : Root WebApplicationContext: initialization completed in 1358 ms
2014-03-05 10:57:51.698  INFO 45469 --- [ost-startStop-1] o.s.b.c.e.ServletRegistrationBean        : Mapping servlet: 'dispatcherServlet' to [/]
2014-03-05 10:57:51.702  INFO 45469 --- [ost-startStop-1] o.s.b.c.embedded.FilterRegistrationBean  : Mapping filter: 'hiddenHttpMethodFilter' to: [/*]

The following items are output:

  • Date and Time — Millisecond precision and easily sortable.
  • Log Level — ERROR, WARN, INFO, DEBUG or TRACE.
  • Process ID.
  • A --- separator to distinguish the start of actual log messages.
  • Thread name — Enclosed in square brackets (may be truncated for console output).
  • Logger name — This is usually the source class name (often abbreviated).
  • The log message.
[Note]Note

Logback does not have a FATAL level (it is mapped to ERROR)

26.2 Console output

The default log configuration will echo messages to the console as they are written. By default ERROR, WARN and INFO level messages are logged. You can also enable a “debug” mode by starting your application with a --debug flag.

$ java -jar myapp.jar --debug
[Note]Note

you can also specify debug=true in your application.properties.

When the debug mode is enabled, a selection of core loggers (embedded container, Hibernate and Spring Boot) are configured to output more information. Enabling the debug mode does not configure your application to log all messages with DEBUG level.

Alternatively, you can enable a “trace” mode by starting your application with a --trace flag (or trace=true in your application.properties). This will enable trace logging for a selection of core loggers (embedded container, Hibernate schema generation and the whole Spring portfolio).

26.2.1 Color-coded output

If your terminal supports ANSI, color output will be used to aid readability. You can set spring.output.ansi.enabled to a supported value to override the auto detection.

Color coding is configured using the %clr conversion word. In its simplest form the converter will color the output according to the log level, for example:

%clr(%5p)

The mapping of log level to a color is as follows:

LevelColor

FATAL

Red

ERROR

Red

WARN

Yellow

INFO

Green

DEBUG

Green

TRACE

Green

Alternatively, you can specify the color or style that should be used by providing it as an option to the conversion. For example, to make the text yellow:

%clr(%d{yyyy-MM-dd HH:mm:ss.SSS}){yellow}

The following colors and styles are supported:

  • blue
  • cyan
  • faint
  • green
  • magenta
  • red
  • yellow

26.3 File output

By default, Spring Boot will only log to the console and will not write log files. If you want to write log files in addition to the console output you need to set a logging.file or logging.path property (for example in your application.properties).

The following table shows how the logging.* properties can be used together:

Table 26.1. Logging properties

logging.filelogging.pathExampleDescription

(none)

(none)

 

Console only logging.

Specific file

(none)

my.log

Writes to the specified log file. Names can be an exact location or relative to the current directory.

(none)

Specific directory

/var/log

Writes spring.log to the specified directory. Names can be an exact location or relative to the current directory.


Log files will rotate when they reach 10 Mb and as with console output, ERROR, WARN and INFO level messages are logged by default.

[Note]Note

The logging system is initialized early in the application lifecycle and as such logging properties will not be found in property files loaded via @PropertySource annotations.

[Tip]Tip

Logging properties are independent of the actual logging infrastructure. As a result, specific configuration keys (such as logback.configurationFile for Logback) are not managed by spring Boot.

26.4 Log Levels

All the supported logging systems can have the logger levels set in the Spring Environment (so for example in application.properties) using ‘logging.level.*=LEVEL’ where ‘LEVEL’ is one of TRACE, DEBUG, INFO, WARN, ERROR, FATAL, OFF. The root logger can be configured using logging.level.root. Example application.properties:

logging.level.root=WARN
logging.level.org.springframework.web=DEBUG
logging.level.org.hibernate=ERROR
[Note]Note

By default Spring Boot remaps Thymeleaf INFO messages so that they are logged at DEBUG level. This helps to reduce noise in the standard log output. See LevelRemappingAppender for details of how you can apply remapping in your own configuration.

26.5 Custom log configuration

The various logging systems can be activated by including the appropriate libraries on the classpath, and further customized by providing a suitable configuration file in the root of the classpath, or in a location specified by the Spring Environment property logging.config.

You can force Spring Boot to use a particular logging system using the org.springframework.boot.logging.LoggingSystem system property. The value should be the fully-qualified class name of a LoggingSystem implementation. You can also disable Spring Boot’s logging configuration entirely by using a value of none.

[Note]Note

Since logging is initialized before the ApplicationContext is created, it isn’t possible to control logging from @PropertySources in Spring @Configuration files. System properties and the conventional Spring Boot external configuration files work just fine.)

Depending on your logging system, the following files will be loaded:

Logging SystemCustomization

Logback

logback-spring.xml, logback-spring.groovy, logback.xml or logback.groovy

Log4j2

log4j2-spring.xml or log4j2.xml

JDK (Java Util Logging)

logging.properties

[Note]Note

When possible we recommend that you use the -spring variants for your logging configuration (for example logback-spring.xml rather than logback.xml). If you use standard configuration locations, Spring cannot completely control log initialization.

[Warning]Warning

There are known classloading issues with Java Util Logging that cause problems when running from an ‘executable jar’. We recommend that you avoid it if at all possible.

To help with the customization some other properties are transferred from the Spring Environment to System properties:

Spring EnvironmentSystem PropertyComments

logging.exception-conversion-word

LOG_EXCEPTION_CONVERSION_WORD

The conversion word that’s used when logging exceptions.

logging.file

LOG_FILE

Used in default log configuration if defined.

logging.path

LOG_PATH

Used in default log configuration if defined.

logging.pattern.console

CONSOLE_LOG_PATTERN

The log pattern to use on the console (stdout). (Only supported with the default logback setup.)

logging.pattern.file

FILE_LOG_PATTERN

The log pattern to use in a file (if LOG_FILE enabled). (Only supported with the default logback setup.)

logging.pattern.level

LOG_LEVEL_PATTERN

The format to use to render the log level (default %5p). (Only supported with the default logback setup.)

PID

PID

The current process ID (discovered if possible and when not already defined as an OS environment variable).

All the logging systems supported can consult System properties when parsing their configuration files. See the default configurations in spring-boot.jar for examples.

[Tip]Tip

If you want to use a placeholder in a logging property, you should use Spring Boot’s syntax and not the syntax of the underlying framework. Notably, if you’re using Logback, you should use : as the delimiter between a property name and its default value and not :-.

[Tip]Tip

You can add MDC and other ad-hoc content to log lines by overriding only the LOG_LEVEL_PATTERN (or logging.pattern.level with Logback). For example, if you use logging.pattern.level=user:%X{user} %5p then the default log format will contain an MDC entry for "user" if it exists, e.g.

2015-09-30 12:30:04.031 user:juergen INFO 22174 --- [  nio-8080-exec-0] demo.Controller
Handling authenticated request

26.6 Logback extensions

Spring Boot includes a number of extensions to Logback which can help with advanced configuration. You can use these extensions in your logback-spring.xml configuration file.

[Note]Note

You cannot use extensions in the standard logback.xml configuration file since it’s loaded too early. You need to either use logback-spring.xml or define a logging.config property.

26.6.1 Profile-specific configuration

The <springProfile> tag allows you to optionally include or exclude sections of configuration based on the active Spring profiles. Profile sections are supported anywhere within the <configuration> element. Use the name attribute to specify which profile accepts the configuration. Multiple profiles can be specified using a comma-separated list.

<springProfile name="staging">
    <!-- configuration to be enabled when the "staging" profile is active -->
</springProfile>

<springProfile name="dev, staging">
    <!-- configuration to be enabled when the "dev" or "staging" profiles are active -->
</springProfile>

<springProfile name="!production">
    <!-- configuration to be enabled when the "production" profile is not active -->
</springProfile>

26.6.2 Environment properties

The <springProperty> tag allows you to surface properties from the Spring Environment for use within Logback. This can be useful if you want to access values from your application.properties file in your logback configuration. The tag works in a similar way to Logback’s standard <property> tag, but rather than specifying a direct value you specify the source of the property (from the Environment). You can use the scope attribute if you need to store the property somewhere other than in local scope. If you need a fallback value in case the property is not set in the Environment, you can use the defaultValue attribute.

<springProperty scope="context" name="fluentHost" source="myapp.fluentd.host"
        defaultValue="localhost"/>
<appender name="FLUENT" class="ch.qos.logback.more.appenders.DataFluentAppender">
    <remoteHost>${fluentHost}</remoteHost>
    ...
</appender>
[Tip]Tip

The RelaxedPropertyResolver is used to access Environment properties. If specify the source in dashed notation (my-property-name) all the relaxed variations will be tried (myPropertyName, MY_PROPERTY_NAME etc).

27. Developing web applications

Spring Boot is well suited for web application development. You can easily create a self-contained HTTP server using embedded Tomcat, Jetty, or Undertow. Most web applications will use the spring-boot-starter-web module to get up and running quickly.

If you haven’t yet developed a Spring Boot web application you can follow the "Hello World!" example in the Getting started section.

27.1 The ‘Spring Web MVC framework’

The Spring Web MVC framework (often referred to as simply ‘Spring MVC’) is a rich ‘model view controller’ web framework. Spring MVC lets you create special @Controller or @RestController beans to handle incoming HTTP requests. Methods in your controller are mapped to HTTP using @RequestMapping annotations.

Here is a typical example @RestController to serve JSON data:

@RestController
@RequestMapping(value="/users")
public class MyRestController {

    @RequestMapping(value="/{user}", method=RequestMethod.GET)
    public User getUser(@PathVariable Long user) {
        // ...
    }

    @RequestMapping(value="/{user}/customers", method=RequestMethod.GET)
    List<Customer> getUserCustomers(@PathVariable Long user) {
        // ...
    }

    @RequestMapping(value="/{user}", method=RequestMethod.DELETE)
    public User deleteUser(@PathVariable Long user) {
        // ...
    }

}

Spring MVC is part of the core Spring Framework and detailed information is available in the reference documentation. There are also several guides available at spring.io/guides that cover Spring MVC.

27.1.1 Spring MVC auto-configuration

Spring Boot provides auto-configuration for Spring MVC that works well with most applications.

The auto-configuration adds the following features on top of Spring’s defaults:

  • Inclusion of ContentNegotiatingViewResolver and BeanNameViewResolver beans.
  • Support for serving static resources, including support for WebJars (see below).
  • Automatic registration of Converter, GenericConverter, Formatter beans.
  • Support for HttpMessageConverters (see below).
  • Automatic registration of MessageCodesResolver (see below).
  • Static index.html support.
  • Custom Favicon support.
  • Automatic use of a ConfigurableWebBindingInitializer bean (see below).

If you want to keep Spring Boot MVC features, and you just want to add additional MVC configuration (interceptors, formatters, view controllers etc.) you can add your own @Configuration class of type WebMvcConfigurerAdapter, but without @EnableWebMvc. If you wish to provide custom instances of RequestMappingHandlerMapping, RequestMappingHandlerAdapter or ExceptionHandlerExceptionResolver you can declare a WebMvcRegistrationsAdapter instance providing such components.

If you want to take complete control of Spring MVC, you can add your own @Configuration annotated with @EnableWebMvc.

27.1.2 HttpMessageConverters

Spring MVC uses the HttpMessageConverter interface to convert HTTP requests and responses. Sensible defaults are included out of the box, for example Objects can be automatically converted to JSON (using the Jackson library) or XML (using the Jackson XML extension if available, else using JAXB). Strings are encoded using UTF-8 by default.

If you need to add or customize converters you can use Spring Boot’s HttpMessageConverters class:

import org.springframework.boot.autoconfigure.web.HttpMessageConverters;
import org.springframework.context.annotation.*;
import org.springframework.http.converter.*;

@Configuration
public class MyConfiguration {

    @Bean
    public HttpMessageConverters customConverters() {
        HttpMessageConverter<?> additional = ...
        HttpMessageConverter<?> another = ...
        return new HttpMessageConverters(additional, another);
    }

}

Any HttpMessageConverter bean that is present in the context will be added to the list of converters. You can also override default converters that way.

27.1.3 Custom JSON Serializers and Deserializers

If you’re using Jackson to serialize and deserialize JSON data, you might want to write your own JsonSerializer and JsonDeserializer classes. Custom serializers are usually registered with Jackson via a Module, but Spring Boot provides an alternative @JsonComponent annotation which makes it easier to directly register Spring Beans.

You can use @JsonComponent directly on JsonSerializer or JsonDeserializer implementations. You can also use it on classes that contains serializers/deserializers as inner-classes. For example:

import java.io.*;
import com.fasterxml.jackson.core.*;
import com.fasterxml.jackson.databind.*;
import org.springframework.boot.jackson.*;

@JsonComponent
public class Example {

    public static class Serializer extends JsonSerializer<SomeObject> {
        // ...
    }

    public static class Deserializer extends JsonDeserializer<SomeObject> {
        // ...
    }

}

All @JsonComponent beans in the ApplicationContext will be automatically registered with Jackson, and since @JsonComponent is meta-annotated with @Component, the usual component-scanning rules apply.

Spring Boot also provides JsonObjectSerializer and JsonObjectDeserializer base classes which provide useful alternatives to the standard Jackson versions when serializing Objects. See the Javadoc for details.

27.1.4 MessageCodesResolver

Spring MVC has a strategy for generating error codes for rendering error messages from binding errors: MessageCodesResolver. Spring Boot will create one for you if you set the spring.mvc.message-codes-resolver.format property PREFIX_ERROR_CODE or POSTFIX_ERROR_CODE (see the enumeration in DefaultMessageCodesResolver.Format).

27.1.5 Static Content

By default Spring Boot will serve static content from a directory called /static (or /public or /resources or /META-INF/resources) in the classpath or from the root of the ServletContext. It uses the ResourceHttpRequestHandler from Spring MVC so you can modify that behavior by adding your own WebMvcConfigurerAdapter and overriding the addResourceHandlers method.

In a stand-alone web application the default servlet from the container is also enabled, and acts as a fallback, serving content from the root of the ServletContext if Spring decides not to handle it. Most of the time this will not happen (unless you modify the default MVC configuration) because Spring will always be able to handle requests through the DispatcherServlet.

You can customize the static resource locations using spring.resources.staticLocations (replacing the default values with a list of directory locations). If you do this the default welcome page detection will switch to your custom locations, so if there is an index.html in any of your locations on startup, it will be the home page of the application.

In addition to the ‘standard’ static resource locations above, a special case is made for Webjars content. Any resources with a path in /webjars/** will be served from jar files if they are packaged in the Webjars format.

[Tip]Tip

Do not use the src/main/webapp directory if your application will be packaged as a jar. Although this directory is a common standard, it will only work with war packaging and it will be silently ignored by most build tools if you generate a jar.

Spring Boot also supports advanced resource handling features provided by Spring MVC, allowing use cases such as cache busting static resources or using version agnostic URLs for Webjars.

To use version agnostic URLs for Webjars, simply add the webjars-locator dependency. Then declare your Webjar, taking jQuery for example, as "/webjars/jquery/dist/jquery.min.js" which results in "/webjars/jquery/x.y.z/dist/jquery.min.js" where x.y.z is the Webjar version.

[Note]Note

If you are using JBoss, you’ll need to declare the webjars-locator-jboss-vfs dependency instead of the webjars-locator; otherwise all Webjars resolve as a 404.

To use cache bursting, the following configuration will configure a cache busting solution for all static resources, effectively adding a content hash in URLs, such as <link href="/css/spring-2a2d595e6ed9a0b24f027f2b63b134d6.css"/>:

spring.resources.chain.strategy.content.enabled=true
spring.resources.chain.strategy.content.paths=/**
[Note]Note

Links to resources are rewritten at runtime in template, thanks to a ResourceUrlEncodingFilter, auto-configured for Thymeleaf, Velocity and FreeMarker. You should manually declare this filter when using JSPs. Other template engines aren’t automatically supported right now, but can be with custom template macros/helpers and the use of the ResourceUrlProvider.

When loading resources dynamically with, for example, a JavaScript module loader, renaming files is not an option. That’s why other strategies are also supported and can be combined. A "fixed" strategy will add a static version string in the URL, without changing the file name:

spring.resources.chain.strategy.content.enabled=true
spring.resources.chain.strategy.content.paths=/**
spring.resources.chain.strategy.fixed.enabled=true
spring.resources.chain.strategy.fixed.paths=/js/lib/
spring.resources.chain.strategy.fixed.version=v12

With this configuration, JavaScript modules located under "/js/lib/" will use a fixed versioning strategy "/v12/js/lib/mymodule.js" while other resources will still use the content one <link href="/css/spring-2a2d595e6ed9a0b24f027f2b63b134d6.css"/>.

See ResourceProperties for more of the supported options.

[Tip]Tip

This feature has been thoroughly described in a dedicated blog post and in Spring Framework’s reference documentation.

27.1.6 ConfigurableWebBindingInitializer

Spring MVC uses a WebBindingInitializer to initialize a WebDataBinder for a particular request. If you create your own ConfigurableWebBindingInitializer @Bean, Spring Boot will automatically configure Spring MVC to use it.

27.1.7 Template engines

As well as REST web services, you can also use Spring MVC to serve dynamic HTML content. Spring MVC supports a variety of templating technologies including Velocity, FreeMarker and JSPs. Many other templating engines also ship their own Spring MVC integrations.

Spring Boot includes auto-configuration support for the following templating engines:

[Tip]Tip

JSPs should be avoided if possible, there are several known limitations when using them with embedded servlet containers.

When you’re using one of these templating engines with the default configuration, your templates will be picked up automatically from src/main/resources/templates.

[Tip]Tip

IntelliJ IDEA orders the classpath differently depending on how you run your application. Running your application in the IDE via its main method will result in a different ordering to when you run your application using Maven or Gradle or from its packaged jar. This can cause Spring Boot to fail to find the templates on the classpath. If you’re affected by this problem you can reorder the classpath in the IDE to place the module’s classes and resources first. Alternatively, you can configure the template prefix to search every templates directory on the classpath: classpath*:/templates/.

27.1.8 Error Handling

Spring Boot provides an /error mapping by default that handles all errors in a sensible way, and it is registered as a ‘global’ error page in the servlet container. For machine clients it will produce a JSON response with details of the error, the HTTP status and the exception message. For browser clients there is a ‘whitelabel’ error view that renders the same data in HTML format (to customize it just add a View that resolves to ‘error’). To replace the default behaviour completely you can implement ErrorController and register a bean definition of that type, or simply add a bean of type ErrorAttributes to use the existing mechanism but replace the contents.

[Tip]Tip

The BasicErrorController can be used as a base class for a custom ErrorController. This is particularly useful if you want to add a handler for a new content type (the default is to handle text/html specifically and provide a fallback for everything else). To do that just extend BasicErrorController and add a public method with a @RequestMapping that has a produces attribute, and create a bean of your new type.

You can also define a @ControllerAdvice to customize the JSON document to return for a particular controller and/or exception type.

@ControllerAdvice(basePackageClasses = FooController.class)
public class FooControllerAdvice extends ResponseEntityExceptionHandler {

    @ExceptionHandler(YourException.class)
    @ResponseBody
    ResponseEntity<?> handleControllerException(HttpServletRequest request, Throwable ex) {
        HttpStatus status = getStatus(request);
        return new ResponseEntity<>(new CustomErrorType(status.value(), ex.getMessage()), status);
    }

    private HttpStatus getStatus(HttpServletRequest request) {
        Integer statusCode = (Integer) request.getAttribute("javax.servlet.error.status_code");
        if (statusCode == null) {
            return HttpStatus.INTERNAL_SERVER_ERROR;
        }
        return HttpStatus.valueOf(statusCode);
    }

}

In the example above, if YourException is thrown by a controller defined in the same package as FooController, a json representation of the CustomerErrorType POJO will be used instead of the ErrorAttributes representation.

Custom error pages

If you want to display a custom HTML error page for a given status code, you add a file to an /error folder. Error pages can either be static HTML (i.e. added under any of the static resource folders) or built using templates. The name of the file should be the exact status code or a series mask.

For example, to map 404 to a static HTML file, your folder structure would look like this:

src/
 +- main/
     +- java/
     |   + <source code>
     +- resources/
         +- public/
             +- error/
             |   +- 404.html
             +- <other public assets>

To map all 5xx errors using a FreeMarker template, you’d have a structure like this:

src/
 +- main/
     +- java/
     |   + <source code>
     +- resources/
         +- templates/
             +- error/
             |   +- 5xx.ftl
             +- <other templates>

For more complex mappings you can also add beans that implement the ErrorViewResolver interface.

public class MyErrorViewResolver implements ErrorViewResolver {

    @Override
    public ModelAndView resolveErrorView(HttpServletRequest request,
            HttpStatus status, Map<String, Object> model) {
        // Use the request or status to optionally return a ModelAndView
        return ...
    }

}

You can also use regular Spring MVC features like @ExceptionHandler methods and @ControllerAdvice. The ErrorController will then pick up any unhandled exceptions.

Mapping error pages outside of Spring MVC

For applications that aren’t using Spring MVC, you can use the ErrorPageRegistrar interface to directly register ErrorPages. This abstraction works directly with the underlying embedded servlet container and will work even if you don’t have a Spring MVC DispatcherServlet.

@Bean
public ErrorPageRegistrar errorPageRegistrar(){
    return new MyErrorPageRegistrar();
}

// ...

private static class MyErrorPageRegistrar implements ErrorPageRegistrar {

    @Override
    public void registerErrorPages(ErrorPageRegistry registry) {
        registry.addErrorPages(new ErrorPage(HttpStatus.BAD_REQUEST, "/400"));
    }

}

N.B. if you register an ErrorPage with a path that will end up being handled by a Filter (e.g. as is common with some non-Spring web frameworks, like Jersey and Wicket), then the Filter has to be explicitly registered as an ERROR dispatcher, e.g.

@Bean
public FilterRegistrationBean myFilter() {
    FilterRegistrationBean registration = new FilterRegistrationBean();
    registration.setFilter(new MyFilter());
    ...
    registration.setDispatcherTypes(EnumSet.allOf(DispatcherType.class));
    return registration;
}

(the default FilterRegistrationBean does not include the ERROR dispatcher type).

Error Handling on WebSphere Application Server

When deployed to a servlet container, a Spring Boot uses its error page filter to forward a request with an error status to the appropriate error page. The request can only be forwarded to the correct error page if the response has not already been committed. By default, WebSphere Application Server 8.0 and later commits the response upon successful completion of a servlet’s service method. You should disable this behaviour by setting com.ibm.ws.webcontainer.invokeFlushAfterService to false

27.1.9 Spring HATEOAS

If you’re developing a RESTful API that makes use of hypermedia, Spring Boot provides auto-configuration for Spring HATEOAS that works well with most applications. The auto-configuration replaces the need to use @EnableHypermediaSupport and registers a number of beans to ease building hypermedia-based applications including a LinkDiscoverers (for client side support) and an ObjectMapper configured to correctly marshal responses into the desired representation. The ObjectMapper will be customized based on the spring.jackson.* properties or a Jackson2ObjectMapperBuilder bean if one exists.

You can take control of Spring HATEOAS’s configuration by using @EnableHypermediaSupport. Note that this will disable the ObjectMapper customization described above.

27.1.10 CORS support

Cross-origin resource sharing (CORS) is a W3C specification implemented by most browsers that allows you to specify in a flexible way what kind of cross domain requests are authorized, instead of using some less secure and less powerful approaches like IFRAME or JSONP.

As of version 4.2, Spring MVC supports CORS out of the box. Using controller method CORS configuration with @CrossOrigin annotations in your Spring Boot application does not require any specific configuration. Global CORS configuration can be defined by registering a WebMvcConfigurer bean with a customized addCorsMappings(CorsRegistry) method:

@Configuration
public class MyConfiguration {

    @Bean
    public WebMvcConfigurer corsConfigurer() {
        return new WebMvcConfigurerAdapter() {
            @Override
            public void addCorsMappings(CorsRegistry registry) {
                registry.addMapping("/api/**");
            }
        };
    }
}

27.2 JAX-RS and Jersey

If you prefer the JAX-RS programming model for REST endpoints you can use one of the available implementations instead of Spring MVC. Jersey 1.x and Apache CXF work quite well out of the box if you just register their Servlet or Filter as a @Bean in your application context. Jersey 2.x has some native Spring support so we also provide auto-configuration support for it in Spring Boot together with a starter.

To get started with Jersey 2.x just include the spring-boot-starter-jersey as a dependency and then you need one @Bean of type ResourceConfig in which you register all the endpoints:

@Component
public class JerseyConfig extends ResourceConfig {

    public JerseyConfig() {
        register(Endpoint.class);
    }

}

You can also register an arbitrary number of beans implementing ResourceConfigCustomizer for more advanced customizations.

All the registered endpoints should be @Components with HTTP resource annotations (@GET etc.), e.g.

@Component
@Path("/hello")
public class Endpoint {

    @GET
    public String message() {
        return "Hello";
    }

}

Since the Endpoint is a Spring @Component its lifecycle is managed by Spring and you can @Autowired dependencies and inject external configuration with @Value. The Jersey servlet will be registered and mapped to /* by default. You can change the mapping by adding @ApplicationPath to your ResourceConfig.

By default Jersey will be set up as a Servlet in a @Bean of type ServletRegistrationBean named jerseyServletRegistration. By default, the servlet will be initialized lazily but you can customize it with spring.jersey.servlet.load-on-startup .You can disable or override that bean by creating one of your own with the same name. You can also use a Filter instead of a Servlet by setting spring.jersey.type=filter (in which case the @Bean to replace or override is jerseyFilterRegistration). The servlet has an @Order which you can set with spring.jersey.filter.order. Both the Servlet and the Filter registrations can be given init parameters using spring.jersey.init.* to specify a map of properties.

There is a Jersey sample so you can see how to set things up. There is also a Jersey 1.x sample. Note that in the Jersey 1.x sample that the spring-boot maven plugin has been configured to unpack some Jersey jars so they can be scanned by the JAX-RS implementation (because the sample asks for them to be scanned in its Filter registration). You may need to do the same if any of your JAX-RS resources are packaged as nested jars.

27.3 Embedded servlet container support

Spring Boot includes support for embedded Tomcat, Jetty, and Undertow servers. Most developers will simply use the appropriate ‘Starter’ to obtain a fully configured instance. By default the embedded server will listen for HTTP requests on port 8080.

27.3.1 Servlets, Filters, and listeners

When using an embedded servlet container you can register Servlets, Filters and all the listeners from the Servlet spec (e.g. HttpSessionListener) either by using Spring beans or by scanning for Servlet components.

Registering Servlets, Filters, and listeners as Spring beans

Any Servlet, Filter or Servlet *Listener instance that is a Spring bean will be registered with the embedded container. This can be particularly convenient if you want to refer to a value from your application.properties during configuration.

By default, if the context contains only a single Servlet it will be mapped to /. In the case of multiple Servlet beans the bean name will be used as a path prefix. Filters will map to /*.

If convention-based mapping is not flexible enough you can use the ServletRegistrationBean, FilterRegistrationBean and ServletListenerRegistrationBean classes for complete control.

27.3.2 Servlet Context Initialization

Embedded servlet containers will not directly execute the Servlet 3.0+ javax.servlet.ServletContainerInitializer interface, or Spring’s org.springframework.web.WebApplicationInitializer interface. This is an intentional design decision intended to reduce the risk that 3rd party libraries designed to run inside a war will break Spring Boot applications.

If you need to perform servlet context initialization in a Spring Boot application, you should register a bean that implements the org.springframework.boot.context.embedded.ServletContextInitializer interface. The single onStartup method provides access to the ServletContext, and can easily be used as an adapter to an existing WebApplicationInitializer if necessary.

Scanning for Servlets, Filters, and listeners

When using an embedded container, automatic registration of @WebServlet, @WebFilter, and @WebListener annotated classes can be enabled using @ServletComponentScan.

[Tip]Tip

@ServletComponentScan will have no effect in a standalone container, where the container’s built-in discovery mechanisms will be used instead.

27.3.3 The EmbeddedWebApplicationContext

Under the hood Spring Boot uses a new type of ApplicationContext for embedded servlet container support. The EmbeddedWebApplicationContext is a special type of WebApplicationContext that bootstraps itself by searching for a single EmbeddedServletContainerFactory bean. Usually a TomcatEmbeddedServletContainerFactory, JettyEmbeddedServletContainerFactory, or UndertowEmbeddedServletContainerFactory will have been auto-configured.

[Note]Note

You usually won’t need to be aware of these implementation classes. Most applications will be auto-configured and the appropriate ApplicationContext and EmbeddedServletContainerFactory will be created on your behalf.

27.3.4 Customizing embedded servlet containers

Common servlet container settings can be configured using Spring Environment properties. Usually you would define the properties in your application.properties file.

Common server settings include:

  • Network settings: listen port for incoming HTTP requests (server.port), interface address to bind to server.address, etc.
  • Session settings: whether the session is persistent (server.session.persistence), session timeout (server.session.timeout), location of session data (server.session.store-dir) and session-cookie configuration (server.session.cookie.*).
  • Error management: location of the error page (server.error.path), etc.
  • SSL
  • HTTP compression

Spring Boot tries as much as possible to expose common settings but this is not always possible. For those cases, dedicated namespaces offer server-specific customizations (see server.tomcat and server.undertow). For instance, access logs can be configured with specific features of the embedded servlet container.

[Tip]Tip

See the ServerProperties class for a complete list.

Programmatic customization

If you need to configure your embedded servlet container programmatically you can register a Spring bean that implements the EmbeddedServletContainerCustomizer interface. EmbeddedServletContainerCustomizer provides access to the ConfigurableEmbeddedServletContainer which includes numerous customization setter methods.

import org.springframework.boot.context.embedded.*;
import org.springframework.stereotype.Component;

@Component
public class CustomizationBean implements EmbeddedServletContainerCustomizer {

    @Override
    public void customize(ConfigurableEmbeddedServletContainer container) {
        container.setPort(9000);
    }

}

Customizing ConfigurableEmbeddedServletContainer directly

If the above customization techniques are too limited, you can register the TomcatEmbeddedServletContainerFactory, JettyEmbeddedServletContainerFactory or UndertowEmbeddedServletContainerFactory bean yourself.

@Bean
public EmbeddedServletContainerFactory servletContainer() {
    TomcatEmbeddedServletContainerFactory factory = new TomcatEmbeddedServletContainerFactory();
    factory.setPort(9000);
    factory.setSessionTimeout(10, TimeUnit.MINUTES);
    factory.addErrorPages(new ErrorPage(HttpStatus.NOT_FOUND, "/notfound.html"));
    return factory;
}

Setters are provided for many configuration options. Several protected method ‘hooks’ are also provided should you need to do something more exotic. See the source code documentation for details.

27.3.5 JSP limitations

When running a Spring Boot application that uses an embedded servlet container (and is packaged as an executable archive), there are some limitations in the JSP support.

  • With Tomcat it should work if you use war packaging, i.e. an executable war will work, and will also be deployable to a standard container (not limited to, but including Tomcat). An executable jar will not work because of a hard coded file pattern in Tomcat.
  • With Jetty it should work if you use war packaging, i.e. an executable war will work, and will also be deployable to any standard container.
  • Undertow does not support JSPs.
  • Creating a custom error.jsp page won’t override the default view for error handling, custom error pages should be used instead.

There is a JSP sample so you can see how to set things up.

28. Security

If Spring Security is on the classpath then web applications will be secure by default with ‘basic’ authentication on all HTTP endpoints. To add method-level security to a web application you can also add @EnableGlobalMethodSecurity with your desired settings. Additional information can be found in the Spring Security Reference.

The default AuthenticationManager has a single user (‘user’ username and random password, printed at INFO level when the application starts up)

Using default security password: 78fa095d-3f4c-48b1-ad50-e24c31d5cf35
[Note]Note

If you fine-tune your logging configuration, ensure that the org.springframework.boot.autoconfigure.security category is set to log INFO messages, otherwise the default password will not be printed.

You can change the password by providing a security.user.password. This and other useful properties are externalized via SecurityProperties (properties prefix "security").

The default security configuration is implemented in SecurityAutoConfiguration and in the classes imported from there (SpringBootWebSecurityConfiguration for web security and AuthenticationManagerConfiguration for authentication configuration which is also relevant in non-web applications). To switch off the default web application security configuration completely you can add a bean with @EnableWebSecurity (this does not disable the authentication manager configuration or Actuator’s security). To customize it you normally use external properties and beans of type WebSecurityConfigurerAdapter (e.g. to add form-based login). To also switch off the authentication manager configuration you can add a bean of type AuthenticationManager, or else configure the global AuthenticationManager by autowiring an AuthenticationManagerBuilder into a method in one of your @Configuration classes. There are several secure applications in the Spring Boot samples to get you started with common use cases.

The basic features you get out of the box in a web application are:

  • An AuthenticationManager bean with in-memory store and a single user (see SecurityProperties.User for the properties of the user).
  • Ignored (insecure) paths for common static resource locations (/css/**, /js/**, /images/**, /webjars/** and **/favicon.ico).
  • HTTP Basic security for all other endpoints.
  • Security events published to Spring’s ApplicationEventPublisher (successful and unsuccessful authentication and access denied).
  • Common low-level features (HSTS, XSS, CSRF, caching) provided by Spring Security are on by default.

All of the above can be switched on and off or modified using external properties (security.*). To override the access rules without changing any other auto-configured features add a @Bean of type WebSecurityConfigurerAdapter with @Order(SecurityProperties.ACCESS_OVERRIDE_ORDER) and configure it to meet your needs.

[Note]Note

By default, a WebSecurityConfigurerAdapter will match any path. If you don’t want to completely override Spring Boot’s auto-configured access rules, your adapter must explicitly configure the paths that you do want to override.

28.1 OAuth2

If you have spring-security-oauth2 on your classpath you can take advantage of some auto-configuration to make it easy to set up Authorization or Resource Server. For full details, see the Spring Security OAuth 2 Developers Guide.

28.1.1 Authorization Server

To create an Authorization Server and grant access tokens you need to use @EnableAuthorizationServer and provide security.oauth2.client.client-id and security.oauth2.client.client-secret] properties. The client will be registered for you in an in-memory repository.

Having done that you will be able to use the client credentials to create an access token, for example:

$ curl client:[email protected]:8080/oauth/token -d grant_type=password -d username=user -d password=pwd

The basic auth credentials for the /token endpoint are the client-id and client-secret. The user credentials are the normal Spring Security user details (which default in Spring Boot to “user” and a random password).

To switch off the auto-configuration and configure the Authorization Server features yourself just add a @Bean of type AuthorizationServerConfigurer.

28.1.2 Resource Server

To use the access token you need a Resource Server (which can be the same as the Authorization Server). Creating a Resource Server is easy, just add @EnableResourceServer and provide some configuration to allow the server to decode access tokens. If your application is also an Authorization Server it already knows how to decode tokens, so there is nothing else to do. If your app is a standalone service then you need to give it some more configuration, one of the following options:

  • security.oauth2.resource.user-info-uri to use the /me resource (e.g. https://uaa.run.pivotal.io/userinfo on PWS)
  • security.oauth2.resource.token-info-uri to use the token decoding endpoint (e.g. https://uaa.run.pivotal.io/check_token on PWS).

If you specify both the user-info-uri and the token-info-uri then you can set a flag to say that one is preferred over the other (prefer-token-info=true is the default).

Alternatively (instead of user-info-uri or token-info-uri) if the tokens are JWTs you can configure a security.oauth2.resource.jwt.key-value to decode them locally (where the key is a verification key). The verification key value is either a symmetric secret or PEM-encoded RSA public key. If you don’t have the key and it’s public you can provide a URI where it can be downloaded (as a JSON object with a “value” field) with security.oauth2.resource.jwt.key-uri. E.g. on PWS:

$ curl https://uaa.run.pivotal.io/token_key
{"alg":"SHA256withRSA","value":"-----BEGIN PUBLIC KEY-----\nMIIBI...\n-----END PUBLIC KEY-----\n"}
[Warning]Warning

If you use the security.oauth2.resource.jwt.key-uri the authorization server needs to be running when your application starts up. It will log a warning if it can’t find the key, and tell you what to do to fix it.

28.2 Token Type in User Info

Google, and certain other 3rd party identity providers, are more strict about the token type name that is sent in the headers to the user info endpoint. The default is “Bearer” which suits most providers and matches the spec, but if you need to change it you can set security.oauth2.resource.token-type.

28.3 Customizing the User Info RestTemplate

If you have a user-info-uri, the resource server features use an OAuth2RestTemplate internally to fetch user details for authentication. This is provided as a qualified @Bean with id userInfoRestTemplate, but you shouldn’t need to know that to just use it. The default should be fine for most providers, but occasionally you might need to add additional interceptors, or change the request authenticator (which is how the token gets attached to outgoing requests). To add a customization just create a bean of type UserInfoRestTemplateCustomizer - it has a single method that will be called after the bean is created but before it is initialized. The rest template that is being customized here is only used internally to carry out authentication.

[Tip]Tip

To set an RSA key value in YAML use the “pipe” continuation marker to split it over multiple lines (“|”) and remember to indent the key value (it’s a standard YAML language feature). Example:

security:
    oauth2:
        resource:
            jwt:
                keyValue: |
                    -----BEGIN PUBLIC KEY-----
                    MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKC...
                    -----END PUBLIC KEY-----

28.3.1 Client

To make your web-app into an OAuth2 client you can simply add @EnableOAuth2Client and Spring Boot will create a OAuth2ClientContext and OAuth2ProtectedResourceDetails that are necessary to create an OAuth2RestOperations. Spring Boot does not automatically create such bean but you can easily create your own:

@Bean
public OAuth2RestTemplate oauth2RestTemplate(OAuth2ClientContext oauth2ClientContext,
        OAuth2ProtectedResourceDetails details) {
    return new OAuth2RestTemplate(details, oauth2ClientContext);
}
[Note]Note

You may want to add a qualifier and review your configuration as more than one RestTemplate may be defined in your application.

This configuration uses security.oauth2.client.* as credentials (the same as you might be using in the Authorization Server), but in addition it will need to know the authorization and token URIs in the Authorization Server. For example:

application.yml. 

security:
    oauth2:
        client:
            clientId: bd1c0a783ccdd1c9b9e4
            clientSecret: 1a9030fbca47a5b2c28e92f19050bb77824b5ad1
            accessTokenUri: https://github.com/login/oauth/access_token
            userAuthorizationUri: https://github.com/login/oauth/authorize
            clientAuthenticationScheme: form

An application with this configuration will redirect to Github for authorization when you attempt to use the OAuth2RestTemplate. If you are already signed into Github you won’t even notice that it has authenticated. These specific credentials will only work if your application is running on port 8080 (register your own client app in Github or other provider for more flexibility).

To limit the scope that the client asks for when it obtains an access token you can set security.oauth2.client.scope (comma separated or an array in YAML). By default the scope is empty and it is up to Authorization Server to decide what the defaults should be, usually depending on the settings in the client registration that it holds.

[Note]Note

There is also a setting for security.oauth2.client.client-authentication-scheme which defaults to “header” (but you might need to set it to “form” if, like Github for instance, your OAuth2 provider doesn’t like header authentication). In fact, the security.oauth2.client.* properties are bound to an instance of AuthorizationCodeResourceDetails so all its properties can be specified.

[Tip]Tip

In a non-web application you can still create an OAuth2RestOperations and it is still wired into the security.oauth2.client.* configuration. In this case it is a “client credentials token grant” you will be asking for if you use it (and there is no need to use @EnableOAuth2Client or @EnableOAuth2Sso). To prevent that infrastructure to be defined, just remove the security.oauth2.client.client-id from your configuration (or make it the empty string).

28.3.2 Single Sign On

An OAuth2 Client can be used to fetch user details from the provider (if such features are available) and then convert them into an Authentication token for Spring Security. The Resource Server above support this via the user-info-uri property This is the basis for a Single Sign On (SSO) protocol based on OAuth2, and Spring Boot makes it easy to participate by providing an annotation @EnableOAuth2Sso. The Github client above can protect all its resources and authenticate using the Github /user/ endpoint, by adding that annotation and declaring where to find the endpoint (in addition to the security.oauth2.client.* configuration already listed above):

application.yml. 

security:
    oauth2:
...
    resource:
        userInfoUri: https://api.github.com/user
        preferTokenInfo: false

Since all paths are secure by default, there is no “home” page that you can show to unauthenticated users and invite them to login (by visiting the /login path, or the path specified by security.oauth2.sso.login-path).

To customize the access rules or paths to protect, so you can add a “home” page for instance, @EnableOAuth2Sso can be added to a WebSecurityConfigurerAdapter and the annotation will cause it to be decorated and enhanced with the necessary pieces to get the /login path working. For example, here we simply allow unauthenticated access to the home page at "/" and keep the default for everything else:

@Configuration
public class WebSecurityConfiguration extends WebSecurityConfigurerAdapter {

    @Override
    public void init(WebSecurity web) {
        web.ignore("/");
    }

    @Override
    protected void configure(HttpSecurity http) throws Exception {
        http.antMatcher("/**").authorizeRequests().anyRequest().authenticated();
    }

}

28.4 Actuator Security

If the Actuator is also in use, you will find:

  • The management endpoints are secure even if the application endpoints are insecure.
  • Security events are transformed into AuditEvents and published to the AuditService.
  • The default user will have the ADMIN role as well as the USER role.

The Actuator security features can be modified using external properties (management.security.*). To override the application access rules add a @Bean of type WebSecurityConfigurerAdapter and use @Order(SecurityProperties.ACCESS_OVERRIDE_ORDER) if you don’t want to override the actuator access rules, or @Order(ManagementServerProperties.ACCESS_OVERRIDE_ORDER) if you do want to override the actuator access rules.

29. Working with SQL databases

The Spring Framework provides extensive support for working with SQL databases. From direct JDBC access using JdbcTemplate to complete ‘object relational mapping’ technologies such as Hibernate. Spring Data provides an additional level of functionality, creating Repository implementations directly from interfaces and using conventions to generate queries from your method names.

29.1 Configure a DataSource

Java’s javax.sql.DataSource interface provides a standard method of working with database connections. Traditionally a DataSource uses a URL along with some credentials to establish a database connection.

29.1.1 Embedded Database Support

It’s often convenient to develop applications using an in-memory embedded database. Obviously, in-memory databases do not provide persistent storage; you will need to populate your database when your application starts and be prepared to throw away data when your application ends.

[Tip]Tip

The ‘How-to’ section includes a section on how to initialize a database

Spring Boot can auto-configure embedded H2, HSQL and Derby databases. You don’t need to provide any connection URLs, simply include a build dependency to the embedded database that you want to use.

For example, typical POM dependencies would be:

<dependency>
    <groupId>org.springframework.boot</groupId>
    <artifactId>spring-boot-starter-data-jpa</artifactId>
</dependency>
<dependency>
    <groupId>org.hsqldb</groupId>
    <artifactId>hsqldb</artifactId>
    <scope>runtime</scope>
</dependency>
[Note]Note

You need a dependency on spring-jdbc for an embedded database to be auto-configured. In this example it’s pulled in transitively via spring-boot-starter-data-jpa.

[Tip]Tip

If, for whatever reason, you do configure the connection URL for an embedded database, care should be taken to ensure that the database’s automatic shutdown is disabled. If you’re using H2 you should use DB_CLOSE_ON_EXIT=FALSE to do so. If you’re using HSQLDB, you should ensure that shutdown=true is not used. Disabling the database’s automatic shutdown allows Spring Boot to control when the database is closed, thereby ensuring that it happens once access to the database is no longer needed.

29.1.2 Connection to a production database

Production database connections can also be auto-configured using a pooling DataSource. Here’s the algorithm for choosing a specific implementation:

  • We prefer the Tomcat pooling DataSource for its performance and concurrency, so if that is available we always choose it.
  • Otherwise, if HikariCP is available we will use it.
  • If neither the Tomcat pooling datasource nor HikariCP are available and if Commons DBCP is available we will use it, but we don’t recommend it in production.
  • Lastly, if Commons DBCP2 is available we will use it.

If you use the spring-boot-starter-jdbc or spring-boot-starter-data-jpa ‘starters’ you will automatically get a dependency to tomcat-jdbc.

[Note]Note

You can bypass that algorithm completely and specify the connection pool to use via the spring.datasource.type property. This is especially important if you are running your application in a Tomcat container as tomcat-jdbc is provided by default.

[Tip]Tip

Additional connection pools can always be configured manually. If you define your own DataSource bean, auto-configuration will not occur.

DataSource configuration is controlled by external configuration properties in spring.datasource.*. For example, you might declare the following section in application.properties:

spring.datasource.url=jdbc:mysql://localhost/test
spring.datasource.username=dbuser
spring.datasource.password=dbpass
spring.datasource.driver-class-name=com.mysql.jdbc.Driver
[Note]Note

You should at least specify the url using the spring.datasource.url property or Spring Boot will attempt to auto-configure an embedded database.

[Tip]Tip

You often won’t need to specify the driver-class-name since Spring boot can deduce it for most databases from the url.

[Note]Note

For a pooling DataSource to be created we need to be able to verify that a valid Driver class is available, so we check for that before doing anything. I.e. if you set spring.datasource.driver-class-name=com.mysql.jdbc.Driver then that class has to be loadable.

See DataSourceProperties for more of the supported options. These are the standard options that work regardless of the actual implementation. It is also possible to fine-tune implementation-specific settings using their respective prefix (spring.datasource.tomcat.*, spring.datasource.hikari.*, spring.datasource.dbcp.* and spring.datasource.dbcp2.*). Refer to the documentation of the connection pool implementation you are using for more details.

For instance, if you are using the Tomcat connection pool you could customize many additional settings:

# Number of ms to wait before throwing an exception if no connection is available.
spring.datasource.tomcat.max-wait=10000

# Maximum number of active connections that can be allocated from this pool at the same time.
spring.datasource.tomcat.max-active=50

# Validate the connection before borrowing it from the pool.
spring.datasource.tomcat.test-on-borrow=true

29.1.3 Connection to a JNDI DataSource

If you are deploying your Spring Boot application to an Application Server you might want to configure and manage your DataSource using your Application Servers built-in features and access it using JNDI.

The spring.datasource.jndi-name property can be used as an alternative to the spring.datasource.url, spring.datasource.username and spring.datasource.password properties to access the DataSource from a specific JNDI location. For example, the following section in application.properties shows how you can access a JBoss AS defined DataSource:

spring.datasource.jndi-name=java:jboss/datasources/customers

29.2 Using JdbcTemplate

Spring’s JdbcTemplate and NamedParameterJdbcTemplate classes are auto-configured and you can @Autowire them directly into your own beans:

import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.jdbc.core.JdbcTemplate;
import org.springframework.stereotype.Component;

@Component
public class MyBean {

    private final JdbcTemplate jdbcTemplate;

    @Autowired
    public MyBean(JdbcTemplate jdbcTemplate) {
        this.jdbcTemplate = jdbcTemplate;
    }

    // ...

}

29.3 JPA and ‘Spring Data’

The Java Persistence API is a standard technology that allows you to ‘map’ objects to relational databases. The spring-boot-starter-data-jpa POM provides a quick way to get started. It provides the following key dependencies:

  • Hibernate — One of the most popular JPA implementations.
  • Spring Data JPA — Makes it easy to implement JPA-based repositories.
  • Spring ORMs — Core ORM support from the Spring Framework.
[Tip]Tip

We won’t go into too many details of JPA or Spring Data here. You can follow the ‘Accessing Data with JPA’ guide from spring.io and read the Spring Data JPA and Hibernate reference documentation.

[Note]Note

By default, Spring Boot uses Hibernate 5.0.x. However it’s also possible to use 4.3.x or 5.2.x if you wish. Please refer to the Hibernate 4 and Hibernate 5.2 samples to see how to do so.

29.3.1 Entity Classes

Traditionally, JPA ‘Entity’ classes are specified in a persistence.xml file. With Spring Boot this file is not necessary and instead ‘Entity Scanning’ is used. By default all packages below your main configuration class (the one annotated with @EnableAutoConfiguration or @SpringBootApplication) will be searched.

Any classes annotated with @Entity, @Embeddable or @MappedSuperclass will be considered. A typical entity class would look something like this:

package com.example.myapp.domain;

import java.io.Serializable;
import javax.persistence.*;

@Entity
public class City implements Serializable {

    @Id
    @GeneratedValue
    private Long id;

    @Column(nullable = false)
    private String name;

    @Column(nullable = false)
    private String state;

    // ... additional members, often include @OneToMany mappings

    protected City() {
        // no-args constructor required by JPA spec
        // this one is protected since it shouldn't be used directly
    }

    public City(String name, String state) {
        this.name = name;
        this.country = country;
    }

    public String getName() {
        return this.name;
    }

    public String getState() {
        return this.state;
    }

    // ... etc

}
[Tip]Tip

You can customize entity scanning locations using the @EntityScan annotation. See the Section 74.4, “Separate @Entity definitions from Spring configuration” how-to.

29.3.2 Spring Data JPA Repositories

Spring Data JPA repositories are interfaces that you can define to access data. JPA queries are created automatically from your method names. For example, a CityRepository interface might declare a findAllByState(String state) method to find all cities in a given state.

For more complex queries you can annotate your method using Spring Data’s Query annotation.

Spring Data repositories usually extend from the Repository or CrudRepository interfaces. If you are using auto-configuration, repositories will be searched from the package containing your main configuration class (the one annotated with @EnableAutoConfiguration or @SpringBootApplication) down.

Here is a typical Spring Data repository:

package com.example.myapp.domain;

import org.springframework.data.domain.*;
import org.springframework.data.repository.*;

public interface CityRepository extends Repository<City, Long> {

    Page<City> findAll(Pageable pageable);

    City findByNameAndCountryAllIgnoringCase(String name, String country);

}
[Tip]Tip

We have barely scratched the surface of Spring Data JPA. For complete details check their reference documentation.

29.3.3 Creating and dropping JPA databases

By default, JPA databases will be automatically created only if you use an embedded database (H2, HSQL or Derby). You can explicitly configure JPA settings using spring.jpa.* properties. For example, to create and drop tables you can add the following to your application.properties.

spring.jpa.hibernate.ddl-auto=create-drop
[Note]Note

Hibernate’s own internal property name for this (if you happen to remember it better) is hibernate.hbm2ddl.auto. You can set it, along with other Hibernate native properties, using spring.jpa.properties.* (the prefix is stripped before adding them to the entity manager). Example:

spring.jpa.properties.hibernate.globally_quoted_identifiers=true

passes hibernate.globally_quoted_identifiers to the Hibernate entity manager.

By default the DDL execution (or validation) is deferred until the ApplicationContext has started. There is also a spring.jpa.generate-ddl flag, but it is not used if Hibernate autoconfig is active because the ddl-auto settings are more fine-grained.

29.4 Using H2’s web console

The H2 database provides a browser-based console that Spring Boot can auto-configure for you. The console will be auto-configured when the following conditions are met:

[Tip]Tip

If you are not using Spring Boot’s developer tools, but would still like to make use of H2’s console, then you can do so by configuring the spring.h2.console.enabled property with a value of true. The H2 console is only intended for use during development so care should be taken to ensure that spring.h2.console.enabled is not set to true in production.

29.4.1 Changing the H2 console’s path

By default the console will be available at /h2-console. You can customize the console’s path using the spring.h2.console.path property.

29.4.2 Securing the H2 console

When Spring Security is on the classpath and basic auth is enabled, the H2 console will be automatically secured using basic auth. The following properties can be used to customize the security configuration:

  • security.user.role
  • security.basic.authorize-mode
  • security.basic.enabled

29.5 Using jOOQ

Java Object Oriented Querying (jOOQ) is a popular product from Data Geekery which generates Java code from your database, and lets you build type safe SQL queries through its fluent API. Both the commercial and open source editions can be used with Spring Boot.

29.5.1 Code Generation

In order to use jOOQ type-safe queries, you need to generate Java classes from your database schema. You can follow the instructions in the jOOQ user manual. If you are using the jooq-codegen-maven plugin (and you also use the spring-boot-starter-parent “parent POM”) you can safely omit the plugin’s <version> tag. You can also use Spring Boot defined version variables (e.g. h2.version) to declare the plugin’s database dependency. Here’s an example:

<plugin>
    <groupId>org.jooq</groupId>
    <artifactId>jooq-codegen-maven</artifactId>
    <executions>
        ...
    </executions>
    <dependencies>
        <dependency>
            <groupId>com.h2database</groupId>
            <artifactId>h2</artifactId>
            <version>${h2.version}</version>
        </dependency>
    </dependencies>
    <configuration>
        <jdbc>
            <driver>org.h2.Driver</driver>
            <url>jdbc:h2:~/yourdatabase</url>
        </jdbc>
        <generator>
            ...
        </generator>
    </configuration>
</plugin>

29.5.2 Using DSLContext

The fluent API offered by jOOQ is initiated via the org.jooq.DSLContext interface. Spring Boot will auto-configure a DSLContext as a Spring Bean and connect it to your application DataSource. To use the DSLContext you can just @Autowire it:

@Component
public class JooqExample implements CommandLineRunner {

    private final DSLContext create;

    @Autowired
    public JooqExample(DSLContext dslContext) {
        this.create = dslContext;
    }

}
[Tip]Tip

The jOOQ manual tends to use a variable named create to hold the DSLContext, we’ve done the same for this example.

You can then use the DSLContext to construct your queries:

public List<GregorianCalendar> authorsBornAfter1980() {
    return this.create.selectFrom(AUTHOR)
        .where(AUTHOR.DATE_OF_BIRTH.greaterThan(new GregorianCalendar(1980, 0, 1)))
        .fetch(AUTHOR.DATE_OF_BIRTH);
}

29.5.3 Customizing jOOQ

You can customize the SQL dialect used by jOOQ by setting spring.jooq.sql-dialect in your application.properties. For example, to specify Postgres you would add:

spring.jooq.sql-dialect=Postgres

More advanced customizations can be achieved by defining your own @Bean definitions which will be used when the jOOQ Configuration is created. You can define beans for the following jOOQ Types:

  • ConnectionProvider
  • TransactionProvider
  • RecordMapperProvider
  • RecordListenerProvider
  • ExecuteListenerProvider
  • VisitListenerProvider

You can also create your own org.jooq.Configuration @Bean if you want to take complete control of the jOOQ configuration.

30. Working with NoSQL technologies

Spring Data provides additional projects that help you access a variety of NoSQL technologies including MongoDB, Neo4J, Elasticsearch, Solr, Redis, Gemfire, Couchbase and Cassandra. Spring Boot provides auto-configuration for Redis, MongoDB, Neo4j, Elasticsearch, Solr and Cassandra; you can make use of the other projects, but you will need to configure them yourself. Refer to the appropriate reference documentation at projects.spring.io/spring-data.

30.1 Redis

Redis is a cache, message broker and richly-featured key-value store. Spring Boot offers basic auto-configuration for the Jedis client library and abstractions on top of it provided by Spring Data Redis. There is a spring-boot-starter-data-redis ‘Starter’ for collecting the dependencies in a convenient way.

30.1.1 Connecting to Redis

You can inject an auto-configured RedisConnectionFactory, StringRedisTemplate or vanilla RedisTemplate instance as you would any other Spring Bean. By default the instance will attempt to connect to a Redis server using localhost:6379:

@Component
public class MyBean {

    private StringRedisTemplate template;

    @Autowired
    public MyBean(StringRedisTemplate template) {
        this.template = template;
    }

    // ...

}

If you add a @Bean of your own of any of the auto-configured types it will replace the default (except in the case of RedisTemplate the exclusion is based on the bean name ‘redisTemplate’ not its type). If commons-pool2 is on the classpath you will get a pooled connection factory by default.

30.2 MongoDB

MongoDB is an open-source NoSQL document database that uses a JSON-like schema instead of traditional table-based relational data. Spring Boot offers several conveniences for working with MongoDB, including the spring-boot-starter-data-mongodb ‘Starter’.

30.2.1 Connecting to a MongoDB database

You can inject an auto-configured org.springframework.data.mongodb.MongoDbFactory to access Mongo databases. By default the instance will attempt to connect to a MongoDB server using the URL mongodb://localhost/test:

import org.springframework.data.mongodb.MongoDbFactory;
import com.mongodb.DB;

@Component
public class MyBean {

    private final MongoDbFactory mongo;

    @Autowired
    public MyBean(MongoDbFactory mongo) {
        this.mongo = mongo;
    }

    // ...

    public void example() {
        DB db = mongo.getDb();
        // ...
    }

}

You can set spring.data.mongodb.uri property to change the URL and configure additional settings such as the replica set:

spring.data.mongodb.uri=mongodb://user:[email protected]:12345,mongo2.example.com:23456/test

Alternatively, as long as you’re using Mongo 2.x, specify a host/port. For example, you might declare the following in your application.properties:

spring.data.mongodb.host=mongoserver
spring.data.mongodb.port=27017
[Note]Note

spring.data.mongodb.host and spring.data.mongodb.port are not supported if you’re using the Mongo 3.0 Java driver. In such cases, spring.data.mongodb.uri should be used to provide all of the configuration.

[Tip]Tip

If spring.data.mongodb.port is not specified the default of 27017 is used. You could simply delete this line from the sample above.

[Tip]Tip

If you aren’t using Spring Data Mongo you can inject com.mongodb.Mongo beans instead of using MongoDbFactory.

You can also declare your own MongoDbFactory or Mongo bean if you want to take complete control of establishing the MongoDB connection.

30.2.2 MongoTemplate

Spring Data Mongo provides a MongoTemplate class that is very similar in its design to Spring’s JdbcTemplate. As with JdbcTemplate Spring Boot auto-configures a bean for you to simply inject:

import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.data.mongodb.core.MongoTemplate;
import org.springframework.stereotype.Component;

@Component
public class MyBean {

    private final MongoTemplate mongoTemplate;

    @Autowired
    public MyBean(MongoTemplate mongoTemplate) {
        this.mongoTemplate = mongoTemplate;
    }

    // ...

}

See the MongoOperations Javadoc for complete details.

30.2.3 Spring Data MongoDB repositories

Spring Data includes repository support for MongoDB. As with the JPA repositories discussed earlier, the basic principle is that queries are constructed for you automatically based on method names.

In fact, both Spring Data JPA and Spring Data MongoDB share the same common infrastructure; so you could take the JPA example from earlier and, assuming that City is now a Mongo data class rather than a JPA @Entity, it will work in the same way.

package com.example.myapp.domain;

import org.springframework.data.domain.*;
import org.springframework.data.repository.*;

public interface CityRepository extends Repository<City, Long> {

    Page<City> findAll(Pageable pageable);

    City findByNameAndCountryAllIgnoringCase(String name, String country);

}
[Tip]Tip

For complete details of Spring Data MongoDB, including its rich object mapping technologies, refer to their reference documentation.

30.2.4 Embedded Mongo

Spring Boot offers auto-configuration for Embedded Mongo. To use it in your Spring Boot application add a dependency on de.flapdoodle.embed:de.flapdoodle.embed.mongo.

The port that Mongo will listen on can be configured using the spring.data.mongodb.port property. To use a randomly allocated free port use a value of zero. The MongoClient created by MongoAutoConfiguration will be automatically configured to use the randomly allocated port.

If you have SLF4J on the classpath, output produced by Mongo will be automatically routed to a logger named org.springframework.boot.autoconfigure.mongo.embedded.EmbeddedMongo.

You can declare your own IMongodConfig and IRuntimeConfig beans to take control of the Mongo instance’s configuration and logging routing.

30.3 Neo4j

Neo4j is an open-source NoSQL graph database that uses a rich data model of nodes related by first class relationships which is better suited for connected big data than traditional rdbms approaches. Spring Boot offers several conveniences for working with Neo4j, including the spring-boot-starter-data-neo4j ‘Starter’.

30.3.1 Connecting to a Neo4j database

You can inject an auto-configured Neo4jSession, Session or Neo4jOperations instance as you would any other Spring Bean. By default the instance will attempt to connect to a Neo4j server using localhost:7474:

@Component
public class MyBean {

    private final Neo4jTemplate neo4jTemplate;

    @Autowired
    public MyBean(Neo4jTemplate neo4jTemplate) {
        this.neo4jTemplate = neo4jTemplate;
    }

    // ...

}

You can take full control of the configuration by adding a org.neo4j.ogm.config.Configuration @Bean of your own. Also, adding a @Bean of type Neo4jOperations disables the auto-configuration.

You can configure the user and credentials to use via the spring.data.neo4j.* properties:

spring.data.neo4j.uri=http://my-server:7474
spring.data.neo4j.username=neo4j
spring.data.neo4j.password=secret

30.3.2 Using the embedded mode

[Note]Note

Neo4j’s embedded mode is subject to a different licensing, make sure to review it before integrating the dependency in your application.

If you add org.neo4j:neo4j-ogm-embedded-driver to the dependencies of your application, Spring Boot will automatically configure an in-process embedded instance of Neo4j that will not persist any data when your application shuts down. You can explicitly disable that mode using spring.data.neo4j.embedded.enabled=false. You can also enable persistence for the embedded mode:

	spring.data.neo4j.uri=file://var/tmp/graph.db

30.3.3 Neo4jSession

By default, the lifetime of the session is scope to the application. If you are running a web application you can change it to scope or request easily:

	spring.data.neo4j.session.scope=session

30.3.4 Spring Data Neo4j repositories

Spring Data includes repository support for Neo4j.

In fact, both Spring Data JPA and Spring Data Neo4j share the same common infrastructure; so you could take the JPA example from earlier and, assuming that City is now a Neo4j OGM @NodeEntity rather than a JPA @Entity, it will work in the same way.

[Tip]Tip

You can customize entity scanning locations using the @EntityScan annotation.

To enable repository support (and optionally support for @Transactional), add the following two annotations to your Spring configuration:

@EnableNeo4jRepositories(basePackages = "com.example.myapp.repository")
@EnableTransactionManagement

30.3.5 Repository example

package com.example.myapp.domain;

import org.springframework.data.domain.*;
import org.springframework.data.repository.*;

public interface CityRepository extends GraphRepository<City> {

    Page<City> findAll(Pageable pageable);

    City findByNameAndCountry(String name, String country);

}
[Tip]Tip

For complete details of Spring Data Neo4j, including its rich object mapping technologies, refer to their reference documentation.

30.4 Gemfire

Spring Data Gemfire provides convenient Spring-friendly tools for accessing the Pivotal Gemfire data management platform. There is a spring-boot-starter-data-gemfire ‘Starter’ for collecting the dependencies in a convenient way. There is currently no auto-configuration support for Gemfire, but you can enable Spring Data Repositories with a single annotation (@EnableGemfireRepositories).

30.5 Solr

Apache Solr is a search engine. Spring Boot offers basic auto-configuration for the Solr 5 client library and abstractions on top of it provided by Spring Data Solr. There is a spring-boot-starter-data-solr ‘Starter’ for collecting the dependencies in a convenient way.

30.5.1 Connecting to Solr

You can inject an auto-configured SolrClient instance as you would any other Spring bean. By default the instance will attempt to connect to a server using localhost:8983/solr:

@Component
public class MyBean {

    private SolrClient solr;

    @Autowired
    public MyBean(SolrClient solr) {
        this.solr = solr;
    }

    // ...

}

If you add a @Bean of your own of type SolrClient it will replace the default.

30.5.2 Spring Data Solr repositories

Spring Data includes repository support for Apache Solr. As with the JPA repositories discussed earlier, the basic principle is that queries are constructed for you automatically based on method names.

In fact, both Spring Data JPA and Spring Data Solr share the same common infrastructure; so you could take the JPA example from earlier and, assuming that City is now a @SolrDocument class rather than a JPA @Entity, it will work in the same way.

[Tip]Tip

For complete details of Spring Data Solr, refer to their reference documentation.

30.6 Elasticsearch

Elasticsearch is an open source, distributed, real-time search and analytics engine. Spring Boot offers basic auto-configuration for the Elasticsearch and abstractions on top of it provided by Spring Data Elasticsearch. There is a spring-boot-starter-data-elasticsearch ‘Starter’ for collecting the dependencies in a convenient way. Spring Boot also supports Jest.

30.6.1 Connecting to Elasticsearch using Jest

If you have Jest on the classpath, you can inject an auto-configured JestClient targeting localhost:9200 by default. You can further tune how the client is configured:

spring.elasticsearch.jest.uris=http://search.example.com:9200
spring.elasticsearch.jest.read-timeout=10000
spring.elasticsearch.jest.username=user
spring.elasticsearch.jest.password=secret

To take full control over the registration, define a JestClient bean.

30.6.2 Connecting to Elasticsearch using Spring Data

You can inject an auto-configured ElasticsearchTemplate or Elasticsearch Client instance as you would any other Spring Bean. By default the instance will embed a local in-memory server (a Node in Elasticsearch terms) and use the current working directory as the home directory for the server. In this setup, the first thing to do is to tell Elasticsearch where to store its files:

spring.data.elasticsearch.properties.path.home=/foo/bar

Alternatively, you can switch to a remote server (i.e. a TransportClient) by setting spring.data.elasticsearch.cluster-nodes to a comma-separated ‘host:port’ list.

spring.data.elasticsearch.cluster-nodes=localhost:9300
@Component
public class MyBean {

    private ElasticsearchTemplate template;

    @Autowired
    public MyBean(ElasticsearchTemplate template) {
        this.template = template;
    }

    // ...

}

If you add a @Bean of your own of type ElasticsearchTemplate it will replace the default.

30.6.3 Spring Data Elasticsearch repositories

Spring Data includes repository support for Elasticsearch. As with the JPA repositories discussed earlier, the basic principle is that queries are constructed for you automatically based on method names.

In fact, both Spring Data JPA and Spring Data Elasticsearch share the same common infrastructure; so you could take the JPA example from earlier and, assuming that City is now an Elasticsearch @Document class rather than a JPA @Entity, it will work in the same way.

[Tip]Tip

For complete details of Spring Data Elasticsearch, refer to their reference documentation.

30.7 Cassandra

Cassandra is an open source, distributed database management system designed to handle large amounts of data across many commodity servers. Spring Boot offers auto-configuration for Cassandra and abstractions on top of it provided by Spring Data Cassandra. There is a spring-boot-starter-data-cassandra ‘Starter’ for collecting the dependencies in a convenient way.

30.7.1 Connecting to Cassandra

You can inject an auto-configured CassandraTemplate or a Cassandra Session instance as you would with any other Spring Bean. The spring.data.cassandra.* properties can be used to customize the connection. Generally you will provide keyspace-name and contact-points properties:

spring.data.cassandra.keyspace-name=mykeyspace
spring.data.cassandra.contact-points=cassandrahost1,cassandrahost2
@Component
public class MyBean {

    private CassandraTemplate template;

    @Autowired
    public MyBean(CassandraTemplate template) {
        this.template = template;
    }

    // ...

}

If you add a @Bean of your own of type CassandraTemplate it will replace the default.

30.7.2 Spring Data Cassandra repositories

Spring Data includes basic repository support for Cassandra. Currently this is more limited than the JPA repositories discussed earlier, and will need to annotate finder methods with @Query.

[Tip]Tip

For complete details of Spring Data Cassandra, refer to their reference documentation.

30.8 Couchbase

Couchbase is an open-source, distributed multi-model NoSQL document-oriented database that is optimized for interactive applications. Spring Boot offers auto-configuration for Couchbase and abstractions on top of it provided by Spring Data Couchbase. There is a spring-boot-starter-data-couchbase ‘Starter’ for collecting the dependencies in a convenient way.

30.8.1 Connecting to Couchbase

You can very easily get a Bucket and Cluster by adding the Couchbase SDK and some configuration. The spring.couchbase.* properties can be used to customize the connection. Generally you will provide the bootstrap hosts, bucket name and password:

spring.couchbase.bootstrap-hosts=my-host-1,192.168.1.123
spring.couchbase.bucket.name=my-bucket
spring.couchbase.bucket.password=secret
[Tip]Tip

You need to provide at least the bootstrap host(s), in which case the bucket name is default and the password is the empty String. Alternatively, you can define your own org.springframework.data.couchbase.config.CouchbaseConfigurer @Bean to take control over the whole configuration.

It is also possible to customize some of the CouchbaseEnvironment settings. For instance the following configuration changes the timeout to use to open a new Bucket and enables SSL support:

spring.couchbase.env.timeouts.connect=3000
spring.couchbase.env.ssl.key-store=/location/of/keystore.jks
spring.couchbase.env.ssl.key-store-password=secret

Check the spring.couchbase.env.* properties for more details.

30.8.2 Spring Data Couchbase repositories

Spring Data includes repository support for Couchbase. For complete details of Spring Data Couchbase, refer to their reference documentation.

You can inject an auto-configured CouchbaseTemplate instance as you would with any other Spring Bean as long as a default CouchbaseConfigurer is available (that happens when you enable the couchbase support as explained above). If you want to bypass the auto-configuration for Spring Data Couchbase, provide your own org.springframework.data.couchbase.config.AbstractCouchbaseDataConfiguration implementation.

@Component
public class MyBean {

    private final CouchbaseTemplate template;

    @Autowired
    public MyBean(CouchbaseTemplate template) {
        this.template = template;
    }

    // ...

}

If you add a @Bean of your own of type CouchbaseTemplate named couchbaseTemplate it will replace the default.

31. Caching

The Spring Framework provides support for transparently adding caching to an application. At its core, the abstraction applies caching to methods, reducing thus the number of executions based on the information available in the cache. The caching logic is applied transparently, without any interference to the invoker.

[Note]Note

Check the relevant section of the Spring Framework reference for more details.

In a nutshell, adding caching to an operation of your service is as easy as adding the relevant annotation to its method:

import javax.cache.annotation.CacheResult;

import org.springframework.stereotype.Component;

@Component
public class MathService {

    @CacheResult
    public int computePiDecimal(int i) {
        // ...
    }

}
[Note]Note

You can either use the standard JSR-107 (JCache) annotations or Spring’s own caching annotations transparently. We strongly advise you however to not mix and match them.

[Tip]Tip

It is also possible to update or evict data from the cache transparently.

31.1 Supported cache providers

The cache abstraction does not provide an actual store and relies on abstraction materialized by the org.springframework.cache.Cache and org.springframework.cache.CacheManager interfaces. Spring Boot auto-configures a suitable CacheManager according to the implementation as long as the caching support is enabled via the @EnableCaching annotation.

[Note]Note

If you are using the cache infrastructure with beans that are not interface-based, make sure to enable the proxyTargetClass attribute of @EnableCaching.

[Tip]Tip

Use the spring-boot-starter-cache ‘Starter’ to quickly add required caching dependencies. If you are adding dependencies manually you should note that certain implementations are only provided by the spring-context-support jar.

If you haven’t defined a bean of type CacheManager or a CacheResolver named cacheResolver (see CachingConfigurer), Spring Boot tries to detect the following providers (in this order):

[Tip]Tip

It is also possible to force the cache provider to use via the spring.cache.type property. Use this property if you need to disable caching altogether in certain environment (e.g. tests).

If the CacheManager is auto-configured by Spring Boot, you can further tune its configuration before it is fully initialized by exposing a bean implementing the CacheManagerCustomizer interface. The following sets the cache names to use.

@Bean
public CacheManagerCustomizer<ConcurrentMapCacheManager> cacheManagerCustomizer() {
    return new CacheManagerCustomizer<ConcurrentMapCacheManager>() {
        @Override
        public void customize(ConcurrentMapCacheManager cacheManager) {
            cacheManager.setCacheNames(Arrays.asList("one", "two"));
        }
    };
}
[Note]Note

In the example above, a ConcurrentMapCacheManager is expected to be configured. If that is not the case, the customizer won’t be invoked at all. You can have as many customizers as you want and you can also order them as usual using @Order or Ordered.

31.1.1 Generic

Generic caching is used if the context defines at least one org.springframework.cache.Cache bean, a CacheManager wrapping them is configured.

31.1.2 JCache (JSR-107)

JCache is bootstrapped via the presence of a javax.cache.spi.CachingProvider on the classpath (i.e. a JSR-107 compliant caching library). There are various compliant libraries out there and Spring Boot provides dependency management for Ehcache 3, Hazelcast and Infinispan). Any other compliant library can be added as well.

It might happen that more than one provider is present, in which case the provider must be explicitly specified. Even if the JSR-107 standard does not enforce a standardized way to define the location of the configuration file, Spring Boot does its best to accommodate with implementation details.

# Only necessary if more than one provider is present
spring.cache.jcache.provider=com.acme.MyCachingProvider
spring.cache.jcache.config=classpath:acme.xml
[Note]Note

Since a cache library may offer both a native implementation and JSR-107 support Spring Boot will prefer the JSR-107 support so that the same features are available if you switch to a different JSR-107 implementation.

There are several ways to customize the underlying javax.cache.cacheManager:

  • Caches can be created on startup via the spring.cache.cache-names property. If a custom javax.cache.configuration.Configuration bean is defined, it is used to customize them.
  • org.springframework.boot.autoconfigure.cache.JCacheManagerCustomizer beans are invoked with the reference of the CacheManager for full customization.
[Tip]Tip

If a standard javax.cache.CacheManager bean is defined, it is wrapped automatically in a org.springframework.cache.CacheManager implementation that the abstraction expects. No further customization is applied on it.

31.1.3 EhCache 2.x

EhCache 2.x is used if a file named ehcache.xml can be found at the root of the classpath. If EhCache 2.x and such file is present it is used to bootstrap the cache manager. An alternate configuration file can be provide a well using:

spring.cache.ehcache.config=classpath:config/another-config.xml

31.1.4 Hazelcast

Spring Boot has a general support for Hazelcast. If a HazelcastInstance has been auto-configured, it is automatically wrapped in a CacheManager.

If for some reason you need a different HazelcastInstance for caching, you can request Spring Boot to create a separate one that will be only used by the CacheManager:

spring.cache.hazelcast.config=classpath:config/my-cache-hazelcast.xml
[Tip]Tip

If a separate HazelcastInstance is created that way, it is not registered in the application context.

31.1.5 Infinispan

Infinispan has no default configuration file location so it must be specified explicitly (or the default bootstrap is used).

spring.cache.infinispan.config=infinispan.xml

Caches can be created on startup via the spring.cache.cache-names property. If a custom ConfigurationBuilder bean is defined, it is used to customize them.

31.1.6 Couchbase

If Couchbase is available and configured, a CouchbaseCacheManager is auto-configured. It is also possible to create additional caches on startup using the spring.cache.cache-names property. These will operate on the Bucket that was auto-configured. You can also create additional caches on another Bucket using the customizer: assume you need two caches on the "main" Bucket (foo and bar) and one biz cache with a custom time to live of 2sec on the another Bucket. First, you can create the two first caches simply via configuration:

spring.cache.cache-names=foo,bar

Then define this extra @Configuration to configure the extra Bucket and the biz cache:

@Configuration
public class CouchbaseCacheConfiguration {

    private final Cluster cluster;

    public CouchbaseCacheConfiguration(Cluster cluster) {
        this.cluster = cluster;
    }

    @Bean
    public Bucket anotherBucket() {
        return this.cluster.openBucket("another", "secret");
    }

    @Bean
    public CacheManagerCustomizer<CouchbaseCacheManager> cacheManagerCustomizer() {
        return c -> {
            c.prepareCache("biz", CacheBuilder.newInstance(anotherBucket())
                    .withExpirationInMillis(2000));
        };
    }

}

This sample configuration reuses the Cluster that was created via auto-configuration.

31.1.7 Redis

If Redis is available and configured, the RedisCacheManager is auto-configured. It is also possible to create additional caches on startup using the spring.cache.cache-names property.

[Note]Note

By default, a key prefix is added to prevent that if two separate caches use the same key, Redis would have overlapping keys and be likely to return invalid values. We strongly recommend to keep this setting enabled if you create your own RedisCacheManager.

31.1.8 Caffeine

Caffeine is a Java 8 rewrite of Guava’s cache and will supersede the Guava support in Spring Boot 2.0. If Caffeine is present, a CaffeineCacheManager is auto-configured. Caches can be created on startup using the spring.cache.cache-names property and customized by one of the following (in this order):

  1. A cache spec defined by spring.cache.caffeine.spec
  2. A com.github.benmanes.caffeine.cache.CaffeineSpec bean is defined
  3. A com.github.benmanes.caffeine.cache.Caffeine bean is defined

For instance, the following configuration creates a foo and bar caches with a maximum size of 500 and a time to live of 10 minutes

spring.cache.cache-names=foo,bar
spring.cache.caffeine.spec=maximumSize=500,expireAfterAccess=600s

Besides, if a com.github.benmanes.caffeine.cache.CacheLoader bean is defined, it is automatically associated to the CaffeineCacheManager. Since the CacheLoader is going to be associated to all caches managed by the cache manager, it must be defined as CacheLoader<Object, Object>. Any other generic type will be ignored by the auto-configuration.

31.1.9 Guava

If Guava is present, a GuavaCacheManager is auto-configured. Caches can be created on startup using the spring.cache.cache-names property and customized by one of the following (in this order):

  1. A cache spec defined by spring.cache.guava.spec
  2. A com.google.common.cache.CacheBuilderSpec bean is defined
  3. A com.google.common.cache.CacheBuilder bean is defined

For instance, the following configuration creates a foo and bar caches with a maximum size of 500 and a time to live of 10 minutes

spring.cache.cache-names=foo,bar
spring.cache.guava.spec=maximumSize=500,expireAfterAccess=600s

Besides, if a com.google.common.cache.CacheLoader bean is defined, it is automatically associated to the GuavaCacheManager. Since the CacheLoader is going to be associated to all caches managed by the cache manager, it must be defined as CacheLoader<Object, Object>. Any other generic type will be ignored by the auto-configuration.

31.1.10 Simple

If none of these options worked out, a simple implementation using ConcurrentHashMap as cache store is configured. This is the default if no caching library is present in your application.

31.1.11 None

When @EnableCaching is present in your configuration, a suitable cache configuration is expected as well. If you need to disable caching altogether in certain environments, force the cache type to none to use a no-op implementation:

spring.cache.type=none

32. Messaging

The Spring Framework provides extensive support for integrating with messaging systems: from simplified use of the JMS API using JmsTemplate to a complete infrastructure to receive messages asynchronously. Spring AMQP provides a similar feature set for the ‘Advanced Message Queuing Protocol’ and Spring Boot also provides auto-configuration options for RabbitTemplate and RabbitMQ. There is also support for STOMP messaging natively in Spring WebSocket and Spring Boot has support for that through starters and a small amount of auto-configuration.

32.1 JMS

The javax.jms.ConnectionFactory interface provides a standard method of creating a javax.jms.Connection for interacting with a JMS broker. Although Spring needs a ConnectionFactory to work with JMS, you generally won’t need to use it directly yourself and you can instead rely on higher level messaging abstractions (see the relevant section of the Spring Framework reference documentation for details). Spring Boot also auto-configures the necessary infrastructure to send and receive messages.

32.1.1 ActiveMQ support

Spring Boot can also configure a ConnectionFactory when it detects that ActiveMQ is available on the classpath. If the broker is present, an embedded broker is started and configured automatically (as long as no broker URL is specified through configuration).

[Note]Note

If you are using spring-boot-starter-activemq the necessary dependencies to connect or embed an ActiveMQ instance are provided, as well as the Spring infrastructure to integrate with JMS.

ActiveMQ configuration is controlled by external configuration properties in spring.activemq.*. For example, you might declare the following section in application.properties:

spring.activemq.broker-url=tcp://192.168.1.210:9876
spring.activemq.user=admin
spring.activemq.password=secret

See ActiveMQProperties for more of the supported options.

By default, ActiveMQ creates a destination if it does not exist yet, so destinations are resolved against their provided names.

32.1.2 Artemis support

Apache Artemis was formed in 2015 when HornetQ was donated to the Apache Foundation. Make sure to use that rather than the deprecated HornetQ support.

[Note]Note

You should not try and use Artemis and HornetQ at the same time.

Spring Boot can auto-configure a ConnectionFactory when it detects that Artemis is available on the classpath. If the broker is present, an embedded broker is started and configured automatically (unless the mode property has been explicitly set). The supported modes are: embedded (to make explicit that an embedded broker is required and should lead to an error if the broker is not available in the classpath), and native to connect to a broker using the netty transport protocol. When the latter is configured, Spring Boot configures a ConnectionFactory connecting to a broker running on the local machine with the default settings.

[Note]Note

If you are using spring-boot-starter-artemis the necessary dependencies to connect to an existing Artemis instance are provided, as well as the Spring infrastructure to integrate with JMS. Adding org.apache.activemq:artemis-jms-server to your application allows you to use the embedded mode.

Artemis configuration is controlled by external configuration properties in spring.artemis.*. For example, you might declare the following section in application.properties:

spring.artemis.mode=native
spring.artemis.host=192.168.1.210
spring.artemis.port=9876
spring.artemis.user=admin
spring.artemis.password=secret

When embedding the broker, you can choose if you want to enable persistence, and the list of destinations that should be made available. These can be specified as a comma-separated list to create them with the default options; or you can define bean(s) of type org.apache.activemq.artemis.jms.server.config.JMSQueueConfiguration or org.apache.activemq.artemis.jms.server.config.TopicConfiguration, for advanced queue and topic configurations respectively.

See ArtemisProperties for more of the supported options.

No JNDI lookup is involved at all and destinations are resolved against their names, either using the ‘name’ attribute in the Artemis configuration or the names provided through configuration.

32.1.3 HornetQ support

[Note]Note

HornetQ is deprecated in 1.4, consider migrating to artemis

Spring Boot can auto-configure a ConnectionFactory when it detects that HornetQ is available on the classpath. If the broker is present, an embedded broker is started and configured automatically (unless the mode property has been explicitly set). The supported modes are: embedded (to make explicit that an embedded broker is required and should lead to an error if the broker is not available in the classpath), and native to connect to a broker using the netty transport protocol. When the latter is configured, Spring Boot configures a ConnectionFactory connecting to a broker running on the local machine with the default settings.

[Note]Note

If you are using spring-boot-starter-hornetq the necessary dependencies to connect to an existing HornetQ instance are provided, as well as the Spring infrastructure to integrate with JMS. Adding org.hornetq:hornetq-jms-server to your application allows you to use the embedded mode.

HornetQ configuration is controlled by external configuration properties in spring.hornetq.*. For example, you might declare the following section in application.properties:

spring.hornetq.mode=native
spring.hornetq.host=192.168.1.210
spring.hornetq.port=9876
spring.hornetq.user=admin
spring.hornetq.password=secret

When embedding the broker, you can choose if you want to enable persistence, and the list of destinations that should be made available. These can be specified as a comma-separated list to create them with the default options; or you can define bean(s) of type org.hornetq.jms.server.config.JMSQueueConfiguration or org.hornetq.jms.server.config.TopicConfiguration, for advanced queue and topic configurations respectively.

See HornetQProperties for more of the supported options.

No JNDI lookup is involved at all and destinations are resolved against their names, either using the ‘name’ attribute in the HornetQ configuration or the names provided through configuration.

32.1.4 Using a JNDI ConnectionFactory

If you are running your application in an Application Server Spring Boot will attempt to locate a JMS ConnectionFactory using JNDI. By default the locations java:/JmsXA and java:/XAConnectionFactory will be checked. You can use the spring.jms.jndi-name property if you need to specify an alternative location:

spring.jms.jndi-name=java:/MyConnectionFactory

32.1.5 Sending a message

Spring’s JmsTemplate is auto-configured and you can autowire it directly into your own beans:

import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.jms.core.JmsTemplate;
import org.springframework.stereotype.Component;

@Component
public class MyBean {

    private final JmsTemplate jmsTemplate;

    @Autowired
    public MyBean(JmsTemplate jmsTemplate) {
        this.jmsTemplate = jmsTemplate;
    }

    // ...

}
[Note]Note

JmsMessagingTemplate can be injected in a similar manner. If a DestinationResolver or MessageConverter beans are defined, they are associated automatically to the auto-configured JmsTemplate.

32.1.6 Receiving a message

When the JMS infrastructure is present, any bean can be annotated with @JmsListener to create a listener endpoint. If no JmsListenerContainerFactory has been defined, a default one is configured automatically. If a DestinationResolver or MessageConverter beans are defined, they are associated automatically to the default factory.

The default factory is transactional by default. If you are running in an infrastructure where a JtaTransactionManager is present, it will be associated to the listener container by default. If not, the sessionTransacted flag will be enabled. In that latter scenario, you can associate your local data store transaction to the processing of an incoming message by adding @Transactional on your listener method (or a delegate thereof). This will make sure that the incoming message is acknowledged once the local transaction has completed. This also includes sending response messages that have been performed on the same JMS session.

The following component creates a listener endpoint on the someQueue destination:

@Component
public class MyBean {

    @JmsListener(destination = "someQueue")
    public void processMessage(String content) {
        // ...
    }

}
[Tip]Tip

Check the Javadoc of @EnableJms for more details.

If you need to create more JmsListenerContainerFactory instances or if you want to override the default, Spring Boot provides a DefaultJmsListenerContainerFactoryConfigurer that you can use to initialize a DefaultJmsListenerContainerFactory with the same settings as the one that is auto-configured.

For instance, the following exposes another factory that uses a specific MessageConverter:

@Configuration
static class JmsConfiguration {

    @Bean
    public DefaultJmsListenerContainerFactory myFactory(
            DefaultJmsListenerContainerFactoryConfigurer configurer) {
        DefaultJmsListenerContainerFactory factory =
                new DefaultJmsListenerContainerFactory();
        configurer.configure(factory, connectionFactory());
        factory.setMessageConverter(myMessageConverter());
        return factory;
    }

}

Then you can use in any @JmsListener-annotated method as follows:

@Component
public class MyBean {

    @JmsListener(destination = "someQueue", containerFactory="myFactory")
    public void processMessage(String content) {
        // ...
    }

}

32.2 AMQP

The Advanced Message Queuing Protocol (AMQP) is a platform-neutral, wire-level protocol for message-oriented middleware. The Spring AMQP project applies core Spring concepts to the development of AMQP-based messaging solutions. Spring Boot offers several conveniences for working with AMQP via RabbitMQ, including the spring-boot-starter-amqp ‘Starter’.

32.2.1 RabbitMQ support

RabbitMQ is a lightweight, reliable, scalable and portable message broker based on the AMQP protocol. Spring uses RabbitMQ to communicate using the AMQP protocol.

RabbitMQ configuration is controlled by external configuration properties in spring.rabbitmq.*. For example, you might declare the following section in application.properties:

spring.rabbitmq.host=localhost
spring.rabbitmq.port=5672
spring.rabbitmq.username=admin
spring.rabbitmq.password=secret

See RabbitProperties for more of the supported options.

32.2.2 Sending a message

Spring’s AmqpTemplate and AmqpAdmin are auto-configured and you can autowire them directly into your own beans:

import org.springframework.amqp.core.AmqpAdmin;
import org.springframework.amqp.core.AmqpTemplate;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.stereotype.Component;

@Component
public class MyBean {

    private final AmqpAdmin amqpAdmin;
    private final AmqpTemplate amqpTemplate;

    @Autowired
    public MyBean(AmqpAdmin amqpAdmin, AmqpTemplate amqpTemplate) {
        this.amqpAdmin = amqpAdmin;
        this.amqpTemplate = amqpTemplate;
    }

    // ...

}
[Note]Note

RabbitMessagingTemplate can be injected in a similar manner. If a MessageConverter bean is defined, it is associated automatically to the auto-configured AmqpTemplate.

Any org.springframework.amqp.core.Queue that is defined as a bean will be automatically used to declare a corresponding queue on the RabbitMQ instance if necessary.

You can enable retries on the AmqpTemplate to retry operations, for example in the event the broker connection is lost. Retries are disabled by default.

32.2.3 Receiving a message

When the Rabbit infrastructure is present, any bean can be annotated with @RabbitListener to create a listener endpoint. If no RabbitListenerContainerFactory has been defined, a default one is configured automatically. If a MessageConverter beans is defined, it is associated automatically to the default factory.

The following component creates a listener endpoint on the someQueue queue:

@Component
public class MyBean {

    @RabbitListener(queues = "someQueue")
    public void processMessage(String content) {
        // ...
    }

}
[Tip]Tip

Check the Javadoc of @EnableRabbit for more details.

If you need to create more RabbitListenerContainerFactory instances or if you want to override the default, Spring Boot provides a SimpleRabbitListenerContainerFactoryConfigurer that you can use to initialize a SimpleRabbitListenerContainerFactory with the same settings as the one that is auto-configured.

For instance, the following exposes another factory that uses a specific MessageConverter:

@Configuration
static class RabbitConfiguration {

    @Bean
    public SimpleRabbitListenerContainerFactory myFactory(
            SimpleRabbitListenerContainerFactoryConfigurer configurer) {
        SimpleRabbitListenerContainerFactory factory =
                new SimpleRabbitListenerContainerFactory();
        configurer.configure(factory, connectionFactory);
        factory.setMessageConverter(myMessageConverter());
        return factory;
    }

}

Then you can use in any @RabbitListener-annotated method as follows:

@Component
public class MyBean {

    @RabbitListener(queues = "someQueue", containerFactory="myFactory")
    public void processMessage(String content) {
        // ...
    }

}

You can enable retries to handle situations where your listener throws an exception. When retries are exhausted, the message will be rejected and either dropped or routed to a dead-letter exchange if the broker is configured so. Retries are disabled by default.

[Important]Important

If retries are not enabled and the listener throws an exception, by default the delivery will be retried indefinitely. You can modify this behavior in two ways; set the defaultRequeueRejected property to false and zero re-deliveries will be attempted; or, throw an AmqpRejectAndDontRequeueException to signal the message should be rejected. This is the mechanism used when retries are enabled and the maximum delivery attempts are reached.

33. Calling REST services

If you need to call remote REST services from your application, you can use Spring Framework’s RestTemplate class. Since RestTemplate instances often need to be customized before being used, Spring Boot does not provide any single auto-configured RestTemplate bean. It does, however, auto-configure a RestTemplateBuilder which can be used to create RestTemplate instances when needed. The auto-configured RestTemplateBuilder will ensure that sensible HttpMessageConverters are applied to RestTemplate instances.

Here’s a typical example:

@Service
public class MyBean {

    private final RestTemplate restTemplate;

    public MyBean(RestTemplateBuilder restTemplateBuilder) {
        this.restTemplate = restTemplateBuilder.build();
    }

    public Details someRestCall(String name) {
        return this.restTemplate.getForObject("/{name}/details", Details.class, name);
    }

}
[Tip]Tip

RestTemplateBuilder includes a number of useful methods that can be used to quickly configure a RestTemplate. For example, to add BASIC auth support you can use builder.basicAuthorization("user", "password").build().

33.1 RestTemplate customization

When a RestTemplateBuilder builds a RestTemplate it can be further customized using a RestTemplateCustomizer. Any RestTemplateCustomizer beans will be automatically added to the auto-configured RestTemplateBuilder. Furthermore, a new RestTemplateBuilder with additional customizers can be created by calling additionalCustomizers(RestTemplateCustomizer…​).

Here’s an example of a customizer that configures the use of a proxy for all hosts except 192.168.0.5:

static class ProxyCustomizer implements RestTemplateCustomizer {

    @Override
    public void customize(RestTemplate restTemplate) {
        HttpHost proxy = new HttpHost("proxy.example.com");
        HttpClient httpClient = HttpClientBuilder.create()
                .setRoutePlanner(new DefaultProxyRoutePlanner(proxy) {

                    @Override
                    public HttpHost determineProxy(HttpHost target,
                            HttpRequest request, HttpContext context)
                                    throws HttpException {
                        if (target.getHostName().equals("192.168.0.5")) {
                            return null;
                        }
                        return super.determineProxy(target, request, context);
                    }

                }).build();
        restTemplate.setRequestFactory(
                new HttpComponentsClientHttpRequestFactory(httpClient));
    }

}

34. Sending email

The Spring Framework provides an easy abstraction for sending email using the JavaMailSender interface and Spring Boot provides auto-configuration for it as well as a starter module.

[Tip]Tip

Check the reference documentation for a detailed explanation of how you can use JavaMailSender.

If spring.mail.host and the relevant libraries (as defined by spring-boot-starter-mail) are available, a default JavaMailSender is created if none exists. The sender can be further customized by configuration items from the spring.mail namespace, see the MailProperties for more details.

35. Distributed Transactions with JTA

Spring Boot supports distributed JTA transactions across multiple XA resources using either an Atomikos or Bitronix embedded transaction manager. JTA transactions are also supported when deploying to a suitable Java EE Application Server.

When a JTA environment is detected, Spring’s JtaTransactionManager will be used to manage transactions. Auto-configured JMS, DataSource and JPA beans will be upgraded to support XA transactions. You can use standard Spring idioms such as @Transactional to participate in a distributed transaction. If you are within a JTA environment and still want to use local transactions you can set the spring.jta.enabled property to false to disable the JTA auto-configuration.

35.1 Using an Atomikos transaction manager

Atomikos is a popular open source transaction manager which can be embedded into your Spring Boot application. You can use the spring-boot-starter-jta-atomikos Starter to pull in the appropriate Atomikos libraries. Spring Boot will auto-configure Atomikos and ensure that appropriate depends-on settings are applied to your Spring beans for correct startup and shutdown ordering.

By default Atomikos transaction logs will be written to a transaction-logs directory in your application home directory (the directory in which your application jar file resides). You can customize this directory by setting a spring.jta.log-dir property in your application.properties file. Properties starting spring.jta.atomikos.properties can also be used to customize the Atomikos UserTransactionServiceImp. See the AtomikosProperties Javadoc for complete details.

[Note]Note

To ensure that multiple transaction managers can safely coordinate the same resource managers, each Atomikos instance must be configured with a unique ID. By default this ID is the IP address of the machine on which Atomikos is running. To ensure uniqueness in production, you should configure the spring.jta.transaction-manager-id property with a different value for each instance of your application.

35.2 Using a Bitronix transaction manager

Bitronix is popular open source JTA transaction manager implementation. You can use the spring-boot-starter-jta-bitronix starter to add the appropriate Bitronix dependencies to your project. As with Atomikos, Spring Boot will automatically configure Bitronix and post-process your beans to ensure that startup and shutdown ordering is correct.

By default Bitronix transaction log files (part1.btm and part2.btm) will be written to a transaction-logs directory in your application home directory. You can customize this directory by using the spring.jta.log-dir property. Properties starting spring.jta.bitronix.properties are also bound to the bitronix.tm.Configuration bean, allowing for complete customization. See the Bitronix documentation for details.

[Note]Note

To ensure that multiple transaction managers can safely coordinate the same resource managers, each Bitronix instance must be configured with a unique ID. By default this ID is the IP address of the machine on which Bitronix is running. To ensure uniqueness in production, you should configure the spring.jta.transaction-manager-id property with a different value for each instance of your application.

35.3 Using a Narayana transaction manager

Narayana is popular open source JTA transaction manager implementation supported by JBoss. You can use the spring-boot-starter-jta-narayana starter to add the appropriate Narayana dependencies to your project. As with Atomikos and Bitronix, Spring Boot will automatically configure Narayana and post-process your beans to ensure that startup and shutdown ordering is correct.

By default Narayana transaction logs will be written to a transaction-logs directory in your application home directory (the directory in which your application jar file resides). You can customize this directory by setting a spring.jta.log-dir property in your application.properties file. Properties starting spring.jta.narayana.properties can also be used to customize the Narayana configuration. See the NarayanaProperties Javadoc for complete details.

[Note]Note

To ensure that multiple transaction managers can safely coordinate the same resource managers, each Narayana instance must be configured with a unique ID. By default this ID is set to 1. To ensure uniqueness in production, you should configure the spring.jta.transaction-manager-id property with a different value for each instance of your application.

35.4 Using a Java EE managed transaction manager

If you are packaging your Spring Boot application as a war or ear file and deploying it to a Java EE application server, you can use your application servers built-in transaction manager. Spring Boot will attempt to auto-configure a transaction manager by looking at common JNDI locations (java:comp/UserTransaction, java:comp/TransactionManager etc). If you are using a transaction service provided by your application server, you will generally also want to ensure that all resources are managed by the server and exposed over JNDI. Spring Boot will attempt to auto-configure JMS by looking for a ConnectionFactory at the JNDI path java:/JmsXA or java:/XAConnectionFactory and you can use the spring.datasource.jndi-name property to configure your DataSource.

35.5 Mixing XA and non-XA JMS connections

When using JTA, the primary JMS ConnectionFactory bean will be XA aware and participate in distributed transactions. In some situations you might want to process certain JMS messages using a non-XA ConnectionFactory. For example, your JMS processing logic might take longer than the XA timeout.

If you want to use a non-XA ConnectionFactory you can inject the nonXaJmsConnectionFactory bean rather than the @Primary jmsConnectionFactory bean. For consistency the jmsConnectionFactory bean is also provided using the bean alias xaJmsConnectionFactory.

For example:

// Inject the primary (XA aware) ConnectionFactory
@Autowired
private ConnectionFactory defaultConnectionFactory;

// Inject the XA aware ConnectionFactory (uses the alias and injects the same as above)
@Autowired
@Qualifier("xaJmsConnectionFactory")
private ConnectionFactory xaConnectionFactory;

// Inject the non-XA aware ConnectionFactory
@Autowired
@Qualifier("nonXaJmsConnectionFactory")
private ConnectionFactory nonXaConnectionFactory;

35.6 Supporting an alternative embedded transaction manager

The XAConnectionFactoryWrapper and XADataSourceWrapper interfaces can be used to support alternative embedded transaction managers. The interfaces are responsible for wrapping XAConnectionFactory and XADataSource beans and exposing them as regular ConnectionFactory and DataSource beans which will transparently enroll in the distributed transaction. DataSource and JMS auto-configuration will use JTA variants as long as you have a JtaTransactionManager bean and appropriate XA wrapper beans registered within your ApplicationContext.

The BitronixXAConnectionFactoryWrapper and BitronixXADataSourceWrapper provide good examples of how to write XA wrappers.

36. Hazelcast

If hazelcast is on the classpath, Spring Boot will auto-configure an HazelcastInstance that you can inject in your application. The HazelcastInstance is only created if a configuration is found.

You can define a com.hazelcast.config.Config bean and we’ll use that. If your configuration defines an instance name, we’ll try to locate an existing instance rather than creating a new one.

You could also specify the hazelcast.xml configuration file to use via configuration:

spring.hazelcast.config=classpath:config/my-hazelcast.xml

Otherwise, Spring Boot tries to find the Hazelcast configuration from the default locations, that is hazelcast.xml in the working directory or at the root of the classpath. We also check if the hazelcast.config system property is set. Check the Hazelcast documentation for more details.

[Note]Note

Spring Boot also has an explicit caching support for Hazelcast. The HazelcastInstance is automatically wrapped in a CacheManager implementation if caching is enabled.

37. Spring Integration

Spring Boot offers several conveniences for working with Spring Integration, including the spring-boot-starter-integration ‘Starter’. Spring Integration provides abstractions over messaging and also other transports such as HTTP, TCP etc. If Spring Integration is available on your classpath it will be initialized through the @EnableIntegration annotation. Message processing statistics will be published over JMX if 'spring-integration-jmx' is also on the classpath. See the IntegrationAutoConfiguration class for more details.

38. Spring Session

Spring Boot provides Spring Session auto-configuration for a wide range of stores:

  • JDBC
  • MongoDB
  • Redis
  • Hazelcast
  • HashMap

If Spring Session is available, you only need to choose the StoreType that you wish to use to store the sessions. For instance to use JDBC as backend store, you’d configure your application as follows:

spring.session.store-type=jdbc
[Note]Note

For backward compatibility if Redis is available Spring Session will be automatically configured to use Redis.

[Tip]Tip

You can disable Spring Session by setting the store-type to none.

Each store has specific additional settings. For instance it is possible to customize the name of the table for the jdbc store:

spring.session.jdbc.table-name=SESSIONS

39. Monitoring and management over JMX

Java Management Extensions (JMX) provide a standard mechanism to monitor and manage applications. By default Spring Boot will create an MBeanServer with bean id ‘mbeanServer’ and expose any of your beans that are annotated with Spring JMX annotations (@ManagedResource, @ManagedAttribute, @ManagedOperation).

See the JmxAutoConfiguration class for more details.

40. Testing

Spring Boot provides a number of utilities and annotations to help when testing your application. Test support is provided by two modules; spring-boot-test contains core items, and spring-boot-test-autoconfigure supports auto-configuration for tests.

Most developers will just use the spring-boot-starter-test ‘Starter’ which imports both Spring Boot test modules as well has JUnit, AssertJ, Hamcrest and a number of other useful libraries.

40.1 Test scope dependencies

If you use the spring-boot-starter-test ‘Starter’ (in the test scope), you will find the following provided libraries:

  • JUnit — The de-facto standard for unit testing Java applications.
  • Spring Test & Spring Boot Test — Utilities and integration test support for Spring Boot applications.
  • AssertJ — A fluent assertion library.
  • Hamcrest — A library of matcher objects (also known as constraints or predicates).
  • Mockito — A Java mocking framework.
  • JSONassert — An assertion library for JSON.
  • JsonPath — XPath for JSON.

These are common libraries that we generally find useful when writing tests. You are free to add additional test dependencies of your own if these don’t suit your needs.

40.2 Testing Spring applications

One of the major advantages of dependency injection is that it should make your code easier to unit test. You can simply instantiate objects using the new operator without even involving Spring. You can also use mock objects instead of real dependencies.

Often you need to move beyond ‘unit testing’ and start ‘integration testing’ (with a Spring ApplicationContext actually involved in the process). It’s useful to be able to perform integration testing without requiring deployment of your application or needing to connect to other infrastructure.

The Spring Framework includes a dedicated test module for just such integration testing. You can declare a dependency directly to org.springframework:spring-test or use the spring-boot-starter-test ‘Starter’ to pull it in transitively.

If you have not used the spring-test module before you should start by reading the relevant section of the Spring Framework reference documentation.

40.3 Testing Spring Boot applications

A Spring Boot application is just a Spring ApplicationContext, so nothing very special has to be done to test it beyond what you would normally do with a vanilla Spring context. One thing to watch out for though is that the external properties, logging and other features of Spring Boot are only installed in the context by default if you use SpringApplication to create it.

Spring Boot provides a @SpringBootTest annotation which can be used as an alternative to the standard spring-test @ContextConfiguration annotation when you need Spring Boot features. The annotation works by creating the ApplicationContext used in your tests via SpringApplication.

You can use the webEnvironment attribute of @SpringBootTest to further refine how your tests will run:

  • MOCK — Loads a WebApplicationContext and provides a mock servlet environment. Embedded servlet containers are not started when using this annotation. If servlet APIs are not on your classpath this mode will transparently fallback to creating a regular non-web ApplicationContext.
  • RANDOM_PORT — Loads an EmbeddedWebApplicationContext and provides a real servlet environment. Embedded servlet containers are started and listening on a random port.
  • DEFINED_PORT — Loads an EmbeddedWebApplicationContext and provides a real servlet environment. Embedded servlet containers are started and listening on a defined port (i.e from your application.properties or on the default port 8080).
  • NONE — Loads an ApplicationContext using SpringApplication but does not provide any servlet environment (mock or otherwise).
[Note]Note

In addition to @SpringBootTest a number of other annotations are also provided for testing more specific slices of an application. See below for details.

[Tip]Tip

Don’t forget to also add @RunWith(SpringRunner.class) to your test, otherwise the annotations will be ignored.

40.3.1 Detecting test configuration

If you’re familiar with the Spring Test Framework, you may be used to using @ContextConfiguration(classes=…​) in order to specify which Spring @Configuration to load. Alternatively, you might have often used nested @Configuration classes within your test.

When testing Spring Boot applications this is often not required. Spring Boot’s @*Test annotations will search for your primary configuration automatically whenever you don’t explicitly define one.

The search algorithm works up from the package that contains the test until it finds a @SpringBootApplication or @SpringBootConfiguration annotated class. As long as you’ve structured your code in a sensible way your main configuration is usually found.

If you want to customize the primary configuration, you can use a nested @TestConfiguration class. Unlike a nested @Configuration class which would be used instead of a your application’s primary configuration, a nested @TestConfiguration class will be used in addition to your application’s primary configuration.

[Note]Note

Spring’s test framework will cache application contexts between tests. Therefore, as long as your tests share the same configuration (no matter how it’s discovered), the potentially time consuming process of loading the context will only happen once.

40.3.2 Excluding test configuration

If your application uses component scanning, for example if you use @SpringBootApplication or @ComponentScan, you may find components or configurations created only for specific tests accidentally get picked up everywhere.

To help prevent this, Spring Boot provides @TestComponent and @TestConfiguration annotations that can be used on classes in src/test/java to indicate that they should not be picked up by scanning.

[Note]Note

@TestComponent and @TestConfiguration are only needed on top level classes. If you define @Configuration or @Component as inner-classes within a test (any class that has @Test methods or @RunWith), they will be automatically filtered.

[Note]Note

If you directly use @ComponentScan (i.e. not via @SpringBootApplication) you will need to register the TypeExcludeFilter with it. See the Javadoc for details.

40.3.3 Working with random ports

If you need to start a full running server for tests, we recommend that you use random ports. If you use @SpringBootTest(webEnvironment=WebEnvironment.RANDOM_PORT) an available port will be picked at random each time your test runs.

The @LocalServerPort annotation can be used to inject the actual port used into your test. For convenience, tests that need to make REST calls to the started server can additionally @Autowire a TestRestTemplate which will resolve relative links to the running server.

import org.junit.*;
import org.junit.runner.*;
import org.springframework.boot.test.context.web.*;
import org.springframework.boot.test.web.client.*;
import org.springframework.test.context.junit4.*;

import static org.assertj.core.api.Assertions.*

@RunWith(SpringRunner.class)
@SpringBootTest(webEnvironment=WebEnvironment.RANDOM_PORT)
public class MyWebIntegrationTests {

    @Autowired
    private TestRestTemplate restTemplate;

    @Test
    public void exampleTest() {
        String body = this.restTemplate.getForObject("/", String.class);
        assertThat(body).isEqualTo("Hello World");
    }

}

40.3.4 Mocking and spying beans

It’s sometimes necessary to mock certain components within your application context when running tests. For example, you may have a facade over some remote service that’s unavailable during development. Mocking can also be useful when you want to simulate failures that might be hard to trigger in a real environment.

Spring Boot includes a @MockBean annotation that can be used to define a Mockito mock for a bean inside your ApplicationContext. You can use the annotation to add new beans, or replace a single existing bean definition. The annotation can be used directly on test classes, on fields within your test, or on @Configuration classes and fields. When used on a field, the instance of the created mock will also be injected. Mock beans are automatically reset after each test method.

Here’s a typical example where we replace an existing RemoteService bean with a mock implementation:

import org.junit.*;
import org.junit.runner.*;
import org.springframework.beans.factory.annotation.*;
import org.springframework.boot.test.context.*;
import org.springframework.boot.test.mock.mockito.*;
import org.springframework.test.context.junit4.*;

import static org.assertj.core.api.Assertions.*;
import static org.mockito.BDDMockito.*;

@RunWith(SpringRunner.class)
@SpringBootTest
public class MyTests {

    @MockBean
    private RemoteService remoteService;

    @Autowired
    private Reverser reverser;

    @Test
    public void exampleTest() {
        // RemoteService has been injected into the reverser bean
        given(this.remoteService.someCall()).willReturn("mock");
        String reverse = reverser.reverseSomeCall();
        assertThat(reverse).isEqualTo("kcom");
    }

}

Additionally you can also use @SpyBean to wrap any existing bean with a Mockito spy. See the Javadoc for full details.

40.3.5 Auto-configured tests

Spring Boot’s auto-configuration system works well for applications, but can sometimes be a little too much for tests. It’s often helpful to load only the parts of the configuration that are required to test a ‘slice’ of your application. For example, you might want to test that Spring MVC controllers are mapping URLs correctly, and you don’t want to involve database calls in those tests; or you might be wanting to test JPA entities, and you’re not interested in web layer when those tests run.

The spring-boot-test-autoconfigure module includes a number of annotations that can be used to automatically configure such ‘slices’. Each of them works in a similar way, providing a @…​Test annotation that loads the ApplicationContext and one or more @AutoConfigure…​ annotations that can be used to customize auto-configuration settings.

[Tip]Tip

It’s also possible to use the @AutoConfigure…​ annotations with the standard @SpringBootTest annotation. You can use this combination if you’re not interested in ‘slicing’ your application but you want some of the auto-configured test beans.

40.3.6 Auto-configured JSON tests

To test that Object JSON serialization and deserialization is working as expected you can use the @JsonTest annotation. @JsonTest will auto-configure Jackson ObjectMapper, any @JsonComponent beans and any Jackson Modules. It also configures Gson if you happen to be using that instead of, or as well as, Jackson. If you need to configure elements of the auto-configuration you can use the @AutoConfigureJsonTesters annotation.

Spring Boot includes AssertJ based helpers that work with the JSONassert and JsonPath libraries to check that JSON is as expected. The JacksonHelper, GsonHelper and BasicJsonTester classes can be used for Jackson, Gson and Strings respectively. Any helper fields on the test class can be @Autowired when using @JsonTest.

import org.junit.*;
import org.junit.runner.*;
import org.springframework.beans.factory.annotation.*;
import org.springframework.boot.test.autoconfigure.json.*;
import org.springframework.boot.test.context.*;
import org.springframework.boot.test.json.*;
import org.springframework.test.context.junit4.*;

import static org.assertj.core.api.Assertions.*;

@RunWith(SpringRunner.class)
@JsonTest
public class MyJsonTests {

    @Autowired
    private JacksonTester<VehicleDetails> json;

    @Test
    public void testSerialize() throws Exception {
        VehicleDetails details = new VehicleDetails("Honda", "Civic");
        // Assert against a `.json` file in the same package as the test
        assertThat(this.json.write(details)).isEqualToJson("expected.json");
        // Or use JSON path based assertions
        assertThat(this.json.write(details)).hasJsonPathStringValue("@.make");
        assertThat(this.json.write(details)).extractingJsonPathStringValue("@.make")
                .isEqualTo("Honda");
    }

    @Test
    public void testDeserialize() throws Exception {
        String content = "{\"make\":\"Ford\",\"model\":\"Focus\"}";
        assertThat(this.json.parse(content))
                .isEqualTo(new VehicleDetails("Ford", "Focus"));
        assertThat(this.json.parseObject(content).getMake()).isEqualTo("Ford");
    }

}
[Note]Note

JSON helper classes can also be used directly in standard unit tests. Simply call the initFields method of the helper in your @Before method if you aren’t using @JsonTest.

A list of the auto-configuration that is enabled by @JsonTest can be found in the appendix.

40.3.7 Auto-configured Spring MVC tests

To test Spring MVC controllers are working as expected you can use the @WebMvcTest annotation. @WebMvcTest will auto-configure the Spring MVC infrastructure and limit scanned beans to @Controller, @ControllerAdvice, @JsonComponent, Filter, WebMvcConfigurer and HandlerMethodArgumentResolver. Regular @Component beans will not be scanned when using this annotation.

Often @WebMvcTest will be limited to a single controller and used in combination with @MockBean to provide mock implementations for required collaborators.

@WebMvcTest also auto-configures MockMvc. Mock MVC offers a powerful way to quickly test MVC controllers without needing to start a full HTTP server.

[Tip]Tip

You can also auto-configure MockMvc in a non-@WebMvcTest (e.g. SpringBootTest) by annotating it with @AutoConfigureMockMvc.

import org.junit.*;
import org.junit.runner.*;
import org.springframework.beans.factory.annotation.*;
import org.springframework.boot.test.autoconfigure.web.servlet.*;
import org.springframework.boot.test.mock.mockito.*;

import static org.assertj.core.api.Assertions.*;
import static org.mockito.BDDMockito.*;
import static org.springframework.test.web.servlet.request.MockMvcRequestBuilders.*;
import static org.springframework.test.web.servlet.result.MockMvcResultMatchers.*;

@RunWith(SpringRunner.class)
@WebMvcTest(UserVehicleController.class)
public class MyControllerTests {

    @Autowired
    private MockMvc mvc;

    @MockBean
    private UserVehicleService userVehicleService;

    @Test
    public void testExample() throws Exception {
        given(this.userVehicleService.getVehicleDetails("sboot"))
                .willReturn(new VehicleDetails("Honda", "Civic"));
        this.mvc.perform(get("/sboot/vehicle").accept(MediaType.TEXT_PLAIN))
                .andExpect(status().isOk()).andExpect(content().string("Honda Civic"));
    }

}
[Tip]Tip

If you need to configure elements of the auto-configuration (for example when servlet filters should be applied) you can use attributes in the @AutoConfigureMockMvc annotation.

If you use HtmlUnit or Selenium, auto-configuration will also provide a WebClient bean and/or a WebDriver bean. Here is an example that uses HtmlUnit:

import com.gargoylesoftware.htmlunit.*;
import org.junit.*;
import org.junit.runner.*;
import org.springframework.beans.factory.annotation.*;
import org.springframework.boot.test.autoconfigure.web.servlet.*;
import org.springframework.boot.test.mock.mockito.*;

import static org.assertj.core.api.Assertions.*;
import static org.mockito.BDDMockito.*;

@RunWith(SpringRunner.class)
@WebMvcTest(UserVehicleController.class)
public class MyHtmlUnitTests {

    @Autowired
    private WebClient webClient;

    @MockBean
    private UserVehicleService userVehicleService;

    @Test
    public void testExample() throws Exception {
        given(this.userVehicleService.getVehicleDetails("sboot"))
                .willReturn(new VehicleDetails("Honda", "Civic"));
        HtmlPage page = this.webClient.getPage("/sboot/vehicle.html");
        assertThat(page.getBody().getTextContent()).isEqualTo("Honda Civic");
    }

}

A list of the auto-configuration that is enabled by @WebMvcTest can be found in the appendix.

40.3.8 Auto-configured Data JPA tests

@DataJpaTest can be used if you want to test JPA applications. By default it will configure an in-memory embedded database, scan for @Entity classes and configure Spring Data JPA repositories. Regular @Component beans will not be loaded into the ApplicationContext.

Data JPA tests are transactional and rollback at the end of each test by default, see the docs.spring.io/spring/docs/4.3.3.RELEASE/spring-framework-reference/htmlsingle#testcontext-tx-enabling-transactions [relevant section] in the Spring Reference Documentation for more details. If that’s not what you want, you can disable transaction management for a test or for the whole class as follows:

import org.junit.Test;
import org.junit.runner.RunWith;
import org.springframework.boot.test.autoconfigure.orm.jpa.DataJpaTest;
import org.springframework.test.context.junit4.SpringRunner;
import org.springframework.transaction.annotation.Propagation;
import org.springframework.transaction.annotation.Transactional;

@RunWith(SpringRunner.class)
@DataJpaTest
@Transactional(propagation = Propagation.NOT_SUPPORTED)
public class ExampleNonTransactionalTests {

}

Data JPA tests may also inject a TestEntityManager bean which provides an alternative to the standard JPA EntityManager specifically designed for tests. If you want to use TestEntityManager outside of @DataJpaTests you can also use the @AutoConfigureTestEntityManager annotation. A JdbcTemplate is also available should you need that.

import org.junit.*;
import org.junit.runner.*;
import org.springframework.boot.test.autoconfigure.orm.jpa.*;

import static org.assertj.core.api.Assertions.*;

@RunWith(SpringRunner.class)
@DataJpaTest
public class ExampleRepositoryTests {

    @Autowired
    private TestEntityManager entityManager;

    @Autowired
    private UserRepository repository;

    @Test
    public void testExample() throws Exception {
        this.entityManager.persist(new User("sboot", "1234"));
        User user = this.repository.findByUsername("sboot");
        assertThat(user.getUsername()).isEqualTo("sboot");
        assertThat(user.getVin()).isEqualTo("1234");
    }

}

In-memory embedded databases generally work well for tests since they are fast and don’t require any developer installation. If, however, you prefer to run tests against a real database you can use the @AutoConfigureTestDatabase annotation:

@RunWith(SpringRunner.class)
@DataJpaTest
@AutoConfigureTestDatabase(replace=Replace.NONE)
public class ExampleRepositoryTests {

    // ...

}

A list of the auto-configuration that is enabled by @DataJpaTest can be found in the appendix.

40.3.9 Auto-configured REST clients

The @RestClientTest annotation can be used if you want to test REST clients. By default it will auto-configure Jackson and GSON support, configure a RestTemplateBuilder and add support for MockRestServiceServer. The specific beans that you want to test should be specified using value or components attribute of @RestClientTest:

@RunWith(SpringRunner.class)
@RestClientTest(RemoteVehicleDetailsService.class)
public class ExampleRestClientTest {

    @Autowired
    private RemoteVehicleDetailsService service;

    @Autowired
    private MockRestServiceServer server;

    @Test
    public void getVehicleDetailsWhenResultIsSuccessShouldReturnDetails()
            throws Exception {
        this.server.expect(requestTo("/greet/details"))
                .andRespond(withSuccess("hello", MediaType.TEXT_PLAIN));
        String greeting = this.service.callRestService();
        assertThat(greeting).isEqualTo("hello");
    }

}

A list of the auto-configuration that is enabled by @RestClientTest can be found in the appendix.

40.3.10 Auto-configured Spring REST Docs tests

The @AutoConfigureRestDocs annotation can be used if you want to use Spring REST Docs in your tests. It will automatically configure MockMvc to use Spring REST Docs and remove the need for Spring REST Docs' JUnit rule.

import org.junit.Test;
import org.junit.runner.RunWith;

import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.boot.test.autoconfigure.web.servlet.WebMvcTest;
import org.springframework.http.MediaType;
import org.springframework.test.context.junit4.SpringRunner;
import org.springframework.test.web.servlet.MockMvc;

import static org.springframework.restdocs.mockmvc.MockMvcRestDocumentation.document;
import static org.springframework.test.web.servlet.request.MockMvcRequestBuilders.get;
import static org.springframework.test.web.servlet.result.MockMvcResultMatchers.*;

@RunWith(SpringRunner.class)
@WebMvcTest(UserController.class)
@AutoConfigureRestDocs("target/generated-snippets")
public class UserDocumentationTests {

    @Autowired
    private MockMvc mvc;

    @Test
    public void listUsers() throws Exception {
        this.mvc.perform(get("/users").accept(MediaType.TEXT_PLAIN))
                .andExpect(status().isOk())
                .andDo(document("list-users"));
    }

}

In addition to configuring the output directory, @AutoConfigureRestDocs can also configure the host, scheme, and port that will appear in any documented URIs. If you require more control over Spring REST Docs' configuration a RestDocsMockMvcConfigurationCustomizer bean can be used:

@TestConfiguration
static class CustomizationConfiguration
        implements RestDocsMockMvcConfigurationCustomizer {

    @Override
    public void customize(MockMvcRestDocumentationConfigurer configurer) {
        configurer.snippets().withTemplateFormat(TemplateFormats.markdown());
    }

}

If you want to make use of Spring REST Docs' support for a parameterized output directory, you can create a RestDocumentationResultHandler bean. The auto-configuration will call alwaysDo with this result handler, thereby causing each MockMvc call to automatically generate the default snippets:

@TestConfiguration
static class ResultHandlerConfiguration {

    @Bean
    public RestDocumentationResultHandler restDocumentation() {
        return MockMvcRestDocumentation.document("{method-name}");
    }

}

40.3.11 Using Spock to test Spring Boot applications

If you wish to use Spock to test a Spring Boot application you should add a dependency on Spock’s spock-spring module to your application’s build. spock-spring integrates Spring’s test framework into Spock. Exactly how you can use Spock to test a Spring Boot application depends on the version of Spock that you are using.

[Note]Note

Spring Boot provides dependency management for Spock 1.0. If you wish to use Spock 1.1 you should override the spock.version property in your build.gradle or pom.xml file.

When using Spock 1.1, the annotations described above can only be used and you can annotate your Specification with @SpringBootTest to suit the needs of your tests.

When using Spock 1.0, @SpringBootTest will not work for a web project. You need to use @SpringApplicationConfiguration and @WebIntegrationTest(randomPort = true). Being unable to use @SpringBootTest means that you also lose the auto-configured TestRestTemplate bean. You can create an equivalent bean yourself using the following configuration:

@Configuration
static class TestRestTemplateConfiguration {

    @Bean
    public TestRestTemplate testRestTemplate(
            ObjectProvider<RestTemplateBuilder> builderProvider,
            Environment environment) {
        RestTemplateBuilder builder = builderProvider.getIfAvailable();
        TestRestTemplate template = builder == null ? new TestRestTemplate()
                : new TestRestTemplate(builder.build());
        template.setUriTemplateHandler(new LocalHostUriTemplateHandler(environment));
        return template;
    }

}

40.4 Test utilities

A few test utility classes are packaged as part of spring-boot that are generally useful when testing your application.

40.4.1 ConfigFileApplicationContextInitializer

ConfigFileApplicationContextInitializer is an ApplicationContextInitializer that can apply to your tests to load Spring Boot application.properties files. You can use this when you don’t need the full features provided by @SpringBootTest.

@ContextConfiguration(classes = Config.class,
    initializers = ConfigFileApplicationContextInitializer.class)
[Note]Note

Using ConfigFileApplicationContextInitializer alone won’t provide support for @Value("${…​}") injection. Its only job is to ensure that application.properties files are loaded into Spring’s Environment. For @Value support you need to either additionally configure a PropertySourcesPlaceholderConfigurer or use @SpringBootTest where one will be auto-configured for you.

40.4.2 EnvironmentTestUtils

EnvironmentTestUtils allows you to quickly add properties to a ConfigurableEnvironment or ConfigurableApplicationContext. Simply call it with key=value strings:

EnvironmentTestUtils.addEnvironment(env, "org=Spring", "name=Boot");

40.4.3 OutputCapture

OutputCapture is a JUnit Rule that you can use to capture System.out and System.err output. Simply declare the capture as a @Rule then use toString() for assertions:

import org.junit.Rule;
import org.junit.Test;
import org.springframework.boot.test.rule.OutputCapture;

import static org.hamcrest.Matchers.*;
import static org.junit.Assert.*;

public class MyTest {

	@Rule
	public OutputCapture capture = new OutputCapture();

	@Test
	public void testName() throws Exception {
		System.out.println("Hello World!");
		assertThat(capture.toString(), containsString("World"));
	}

}

40.4.4 TestRestTemplate

TestRestTemplate is a convenience alternative to Spring’s RestTemplate that is useful in integration tests. You can get a vanilla template or one that sends Basic HTTP authentication (with a username and password). In either case the template will behave in a test-friendly way: not following redirects (so you can assert the response location), ignoring cookies (so the template is stateless), and not throwing exceptions on server-side errors. It is recommended, but not mandatory, to use Apache HTTP Client (version 4.3.2 or better), and if you have that on your classpath the TestRestTemplate will respond by configuring the client appropriately.

public class MyTest {

	private TestRestTemplate template = new TestRestTemplate();

	@Test
	public void testRequest() throws Exception {
		HttpHeaders headers = template.getForEntity("http://myhost.com", String.class).getHeaders();
		assertThat(headers.getLocation().toString(), containsString("myotherhost"));
	}

}

If you are using the @SpringBootTest annotation with WebEnvironment.RANDOM_PORT or WebEnvironment.DEFINED_PORT, you can just inject a fully configured TestRestTemplate and start using it. If necessary, additional customizations can be applied via the RestTemplateBuilder bean:

@RunWith(SpringRunner.class)
@SpringBootTest
public class MyTest {

	@Autowired
	private TestRestTemplate template;

	@Test
	public void testRequest() throws Exception {
		HttpHeaders headers = template.getForEntity("http://myhost.com", String.class).getHeaders();
		assertThat(headers.getLocation().toString(), containsString("myotherhost"));
	}

	@TestConfiguration
	static class Config {

		@Bean
		public RestTemplateBuilder restTemplateBuilder() {
			return new RestTemplateBuilder()
				.additionalMessageConverters(...)
				.customizers(...);
		}

	}

}

41. WebSockets

Spring Boot provides WebSockets auto-configuration for embedded Tomcat (8 and 7), Jetty 9 and Undertow. If you’re deploying a war file to a standalone container, Spring Boot assumes that the container will be responsible for the configuration of its WebSocket support.

Spring Framework provides rich WebSocket support that can be easily accessed via the spring-boot-starter-websocket module.

42. Web Services

Spring Boot provides Web Services auto-configuration so that all is required is defining your Endpoints.

The Spring Web Services features can be easily accessed via the spring-boot-starter-webservices module.

43. Creating your own auto-configuration

If you work in a company that develops shared libraries, or if you work on an open-source or commercial library, you might want to develop your own auto-configuration. Auto-configuration classes can be bundled in external jars and still be picked-up by Spring Boot.

Auto-configuration can be associated to a "starter" that provides the auto-configuration code as well as the typical libraries that you would use with it. We will first cover what you need to know to build your own auto-configuration and we will move on to the typical steps required to create a custom starter.

[Tip]Tip

A demo project is available to showcase how you can create a starter step by step.

43.1 Understanding auto-configured beans

Under the hood, auto-configuration is implemented with standard @Configuration classes. Additional @Conditional annotations are used to constrain when the auto-configuration should apply. Usually auto-configuration classes use @ConditionalOnClass and @ConditionalOnMissingBean annotations. This ensures that auto-configuration only applies when relevant classes are found and when you have not declared your own @Configuration.

You can browse the source code of spring-boot-autoconfigure to see the @Configuration classes that we provide (see the META-INF/spring.factories file).

43.2 Locating auto-configuration candidates

Spring Boot checks for the presence of a META-INF/spring.factories file within your published jar. The file should list your configuration classes under the EnableAutoConfiguration key.

org.springframework.boot.autoconfigure.EnableAutoConfiguration=\
com.mycorp.libx.autoconfigure.LibXAutoConfiguration,\
com.mycorp.libx.autoconfigure.LibXWebAutoConfiguration

You can use the @AutoConfigureAfter or @AutoConfigureBefore annotations if your configuration needs to be applied in a specific order. For example, if you provide web-specific configuration, your class may need to be applied after WebMvcAutoConfiguration.

If you want to order certain auto-configurations that shouldn’t have any direct knowledge of each other, you can also use @AutoconfigureOrder. That annotation has the same semantic as the regular @Order annotation but provides a dedicated order for auto-configuration classes.

[Note]Note

Auto-configurations have to be loaded that way only. Make sure that they are defined in a specific package space and that they are never the target of component scan in particular.

43.3 Condition annotations

You almost always want to include one or more @Conditional annotations on your auto-configuration class. The @ConditionalOnMissingBean is one common example that is used to allow developers to ‘override’ auto-configuration if they are not happy with your defaults.

Spring Boot includes a number of @Conditional annotations that you can reuse in your own code by annotating @Configuration classes or individual @Bean methods.

43.3.1 Class conditions

The @ConditionalOnClass and @ConditionalOnMissingClass annotations allows configuration to be included based on the presence or absence of specific classes. Due to the fact that annotation metadata is parsed using ASM you can actually use the value attribute to refer to the real class, even though that class might not actually appear on the running application classpath. You can also use the name attribute if you prefer to specify the class name using a String value.

43.3.2 Bean conditions

The @ConditionalOnBean and @ConditionalOnMissingBean annotations allow a bean to be included based on the presence or absence of specific beans. You can use the value attribute to specify beans by type, or name to specify beans by name. The search attribute allows you to limit the ApplicationContext hierarchy that should be considered when searching for beans.

[Tip]Tip

You need to be very careful about the order that bean definitions are added as these conditions are evaluated based on what has been processed so far. For this reason, we recommend only using @ConditionalOnBean and @ConditionalOnMissingBean annotations on auto-configuration classes (since these are guaranteed to load after any user-define beans definitions have been added).

[Note]Note

@ConditionalOnBean and @ConditionalOnMissingBean do not prevent @Configuration classes from being created. Using these conditions at the class level is equivalent to marking each contained @Bean method with the annotation.

43.3.3 Property conditions

The @ConditionalOnProperty annotation allows configuration to be included based on a Spring Environment property. Use the prefix and name attributes to specify the property that should be checked. By default any property that exists and is not equal to false will be matched. You can also create more advanced checks using the havingValue and matchIfMissing attributes.

43.3.4 Resource conditions

The @ConditionalOnResource annotation allows configuration to be included only when a specific resource is present. Resources can be specified using the usual Spring conventions, for example, file:/home/user/test.dat.

43.3.5 Web application conditions

The @ConditionalOnWebApplication and @ConditionalOnNotWebApplication annotations allow configuration to be included depending on whether the application is a 'web application'. A web application is any application that is using a Spring WebApplicationContext, defines a session scope or has a StandardServletEnvironment.

43.3.6 SpEL expression conditions

The @ConditionalOnExpression annotation allows configuration to be included based on the result of a SpEL expression.

43.4 Creating your own starter

A full Spring Boot starter for a library may contain the following components:

  • The autoconfigure module that contains the auto-configuration code.
  • The starter module that provides a dependency to the autoconfigure module as well as the library and any additional dependencies that are typically useful. In a nutshell, adding the starter should be enough to start using that library.
[Tip]Tip

You may combine the auto-configuration code and the dependency management in a single module if you don’t need to separate those two concerns.

43.4.1 Naming

Please make sure to provide a proper namespace for your starter. Do not start your module names with spring-boot, even if you are using a different Maven groupId. We may offer an official support for the thing you’re auto-configuring in the future.

Here is a rule of thumb. Let’s assume that you are creating a starter for "acme", name the auto-configure module acme-spring-boot-autoconfigure and the starter acme-spring-boot-starter. If you only have one module combining the two, use acme-spring-boot-starter.

Besides, if your starter provides configuration keys, use a proper namespace for them. In particular, do not include your keys in the namespaces that Spring Boot uses (e.g. server, management, spring, etc). These are "ours" and we may improve/modify them in the future in such a way it could break your things.

Make sure to trigger meta-data generation so that IDE assistance is available for your keys as well. You may want to review the generated meta-data (META-INF/spring-configuration-metadata.json) to make sure your keys are properly documented.

43.4.2 Autoconfigure module

The autoconfigure module contains everything that is necessary to get started with the library. It may also contain configuration keys definition (@ConfigurationProperties) and any callback interface that can be used to further customize how the components are initialized.

[Tip]Tip

You should mark the dependencies to the library as optional so that you can include the autoconfigure module in your projects more easily. If you do it that way, the library won’t be provided and Spring Boot will back off by default.

43.4.3 Starter module

The starter is an empty jar, really. Its only purpose is to provide the necessary dependencies to work with the library; see it as an opinionated view of what is required to get started.

Do not make assumptions about the project in which your starter is added. If the library you are auto-configuring typically requires other starters, mention them as well. Providing a proper set of default dependencies may be hard if the number of optional dependencies is high as you should avoid bringing unnecessary dependencies for a typical usage of the library.

44. What to read next

If you want to learn more about any of the classes discussed in this section you can check out the Spring Boot API documentation or you can browse the source code directly. If you have specific questions, take a look at the how-to section.

If you are comfortable with Spring Boot’s core features, you can carry on and read about production-ready features.

Part V. Spring Boot Actuator: Production-ready features

Spring Boot includes a number of additional features to help you monitor and manage your application when it’s pushed to production. You can choose to manage and monitor your application using HTTP endpoints, with JMX or even by remote shell (SSH or Telnet). Auditing, health and metrics gathering can be automatically applied to your application.

Actuator HTTP endpoints are only available with a Spring MVC-based application. In particular, it will not work with Jersey unless you enable Spring MVC as well.

45. Enabling production-ready features

The spring-boot-actuator module provides all of Spring Boot’s production-ready features. The simplest way to enable the features is to add a dependency to the spring-boot-starter-actuator ‘Starter’.

To add the actuator to a Maven based project, add the following ‘Starter’ dependency:

<dependencies>
    <dependency>
        <groupId>org.springframework.boot</groupId>
        <artifactId>spring-boot-starter-actuator</artifactId>
    </dependency>
</dependencies>

For Gradle, use the declaration:

dependencies {
    compile("org.springframework.boot:spring-boot-starter-actuator")
}

46. Endpoints

Actuator endpoints allow you to monitor and interact with your application. Spring Boot includes a number of built-in endpoints and you can also add your own. For example the health endpoint provides basic application health information.

The way that endpoints are exposed will depend on the type of technology that you choose. Most applications choose HTTP monitoring, where the ID of the endpoint is mapped to a URL. For example, by default, the health endpoint will be mapped to /health.

The following technology agnostic endpoints are available:

IDDescriptionSensitive Default

actuator

Provides a hypermedia-based “discovery page” for the other endpoints. Requires Spring HATEOAS to be on the classpath.

true

autoconfig

Displays an auto-configuration report showing all auto-configuration candidates and the reason why they ‘were’ or ‘were not’ applied.

true

beans

Displays a complete list of all the Spring beans in your application.

true

configprops

Displays a collated list of all @ConfigurationProperties.

true

dump

Performs a thread dump.

true

env

Exposes properties from Spring’s ConfigurableEnvironment.

true

flyway

Shows any Flyway database migrations that have been applied.

true

health

Shows application health information (when the application is secure, a simple ‘status’ when accessed over an unauthenticated connection or full message details when authenticated).

false

info

Displays arbitrary application info.

false

liquibase

Shows any Liquibase database migrations that have been applied.

true

metrics

Shows ‘metrics’ information for the current application.

true

mappings

Displays a collated list of all @RequestMapping paths.

true

shutdown

Allows the application to be gracefully shutdown (not enabled by default).

true

trace

Displays trace information (by default the last 100 HTTP requests).

true

If you are using Spring MVC, the following additional endpoints can also be used:

IDDescriptionSensitive Default

docs

Displays documentation, including example requests and responses, for the Actuator’s endpoints. Requires spring-boot-actuator-docs to be on the classpath.

false

heapdump

Returns a GZip compressed hprof heap dump file.

true

jolokia

Exposes JMX beans over HTTP (when Jolokia is on the classpath).

true

logfile

Returns the contents of the logfile (if logging.file or logging.path properties have been set). Supports the use of the HTTP Range header to retrieve part of the log file’s content.

true

[Note]Note

Depending on how an endpoint is exposed, the sensitive property may be used as a security hint. For example, sensitive endpoints will require a username/password when they are accessed over HTTP (or simply disabled if web security is not enabled).

46.1 Customizing endpoints

Endpoints can be customized using Spring properties. You can change if an endpoint is enabled, if it is considered sensitive and even its id.

For example, here is an application.properties that changes the sensitivity and id of the beans endpoint and also enables shutdown.

endpoints.beans.id=springbeans
endpoints.beans.sensitive=false
endpoints.shutdown.enabled=true
[Note]Note

The prefix ‟endpoints + . + name” is used to uniquely identify the endpoint that is being configured.

By default, all endpoints except for shutdown are enabled. If you prefer to specifically “opt-in” endpoint enablement you can use the endpoints.enabled property. For example, the following will disable all endpoints except for info:

endpoints.enabled=false
endpoints.info.enabled=true

Likewise, you can also choose to globally set the “sensitive” flag of all endpoints. By default, the sensitive flag depends on the type of endpoint (see the table above). For example, to mark all endpoints as sensitive except info:

endpoints.sensitive=true
endpoints.info.sensitive=false

46.2 Hypermedia for actuator MVC endpoints

If Spring HATEOAS is on the classpath (e.g. through the spring-boot-starter-hateoas or if you are using Spring Data REST) then the HTTP endpoints from the Actuator are enhanced with hypermedia links, and a “discovery page” is added with links to all the endpoints. The “discovery page” is available on /actuator by default. It is implemented as an endpoint, allowing properties to be used to configure its path (endpoints.actuator.path) and whether or not it is enabled (endpoints.actuator.enabled).

When a custom management context path is configured, the “discovery page” will automatically move from /actuator to the root of the management context. For example, if the management context path is /management then the discovery page will be available from /management.

If the HAL Browser is on the classpath via its webjar (org.webjars:hal-browser), or via the spring-data-rest-hal-browser then an HTML “discovery page”, in the form of the HAL Browser, is also provided.

46.3 CORS support

Cross-origin resource sharing (CORS) is a W3C specification that allows you to specify in a flexible way what kind of cross domain requests are authorized. Actuator’s MVC endpoints can be configured to support such scenarios.

CORS support is disabled by default and is only enabled once the endpoints.cors.allowed-origins property has been set. The configuration below permits GET and POST calls from the example.com domain:

endpoints.cors.allowed-origins=http://example.com
endpoints.cors.allowed-methods=GET,POST
[Tip]Tip

Check EndpointCorsProperties for a complete list of options.

46.4 Adding custom endpoints

If you add a @Bean of type Endpoint then it will automatically be exposed over JMX and HTTP (if there is an server available). An HTTP endpoints can be customized further by creating a bean of type MvcEndpoint. Your MvcEndpoint is not a @Controller but it can use @RequestMapping (and @Managed*) to expose resources.

[Tip]Tip

If you are doing this as a library feature consider adding a configuration class annotated with @ManagementContextConfiguration to /META-INF/spring.factories under the key org.springframework.boot.actuate.autoconfigure.ManagementContextConfiguration. If you do that then the endpoint will move to a child context with all the other MVC endpoints if your users ask for a separate management port or address. A configuration declared this way can be a WebConfigurerAdapter if it wants to add static resources (for instance) to the management endpoints.

46.5 Health information

Health information can be used to check the status of your running application. It is often used by monitoring software to alert someone if a production system goes down. The default information exposed by the health endpoint depends on how it is accessed. For an unauthenticated connection in a secure application a simple ‘status’ message is returned, and for an authenticated connection additional details are also displayed (see Section 47.7, “HTTP health endpoint access restrictions” for HTTP details).

Health information is collected from all HealthIndicator beans defined in your ApplicationContext. Spring Boot includes a number of auto-configured HealthIndicators and you can also write your own.

46.6 Security with HealthIndicators

Information returned by HealthIndicators is often somewhat sensitive in nature. For example, you probably don’t want to publish details of your database server to the world. For this reason, by default, only the health status is exposed over an unauthenticated HTTP connection. If you are happy for complete health information to always be exposed you can set endpoints.health.sensitive to false.

Health responses are also cached to prevent “denial of service” attacks. Use the endpoints.health.time-to-live property if you want to change the default cache period of 1000 milliseconds.

46.6.1 Auto-configured HealthIndicators

The following HealthIndicators are auto-configured by Spring Boot when appropriate:

NameDescription

CassandraHealthIndicator

Checks that a Cassandra database is up.

DiskSpaceHealthIndicator

Checks for low disk space.

DataSourceHealthIndicator

Checks that a connection to DataSource can be obtained.

ElasticsearchHealthIndicator

Checks that an Elasticsearch cluster is up.

JmsHealthIndicator

Checks that a JMS broker is up.

MailHealthIndicator

Checks that a mail server is up.

MongoHealthIndicator

Checks that a Mongo database is up.

RabbitHealthIndicator

Checks that a Rabbit server is up.

RedisHealthIndicator

Checks that a Redis server is up.

SolrHealthIndicator

Checks that a Solr server is up.

[Tip]Tip

It is possible to disable them all using the management.health.defaults.enabled property.

46.6.2 Writing custom HealthIndicators

To provide custom health information you can register Spring beans that implement the HealthIndicator interface. You need to provide an implementation of the health() method and return a Health response. The Health response should include a status and can optionally include additional details to be displayed.

import org.springframework.boot.actuate.health.Health;
import org.springframework.boot.actuate.health.HealthIndicator;
import org.springframework.stereotype.Component;

@Component
public class MyHealthIndicator implements HealthIndicator {

    @Override
    public Health health() {
        int errorCode = check(); // perform some specific health check
        if (errorCode != 0) {
            return Health.down().withDetail("Error Code", errorCode).build();
        }
        return Health.up().build();
    }

}
[Note]Note

The identifier for a given HealthIndicator is the name of the bean without the HealthIndicator suffix if it exists. In the example above, the health information will be available in an entry named my.

In addition to Spring Boot’s predefined Status types, it is also possible for Health to return a custom Status that represents a new system state. In such cases a custom implementation of the HealthAggregator interface also needs to be provided, or the default implementation has to be configured using the management.health.status.order configuration property.

For example, assuming a new Status with code FATAL is being used in one of your HealthIndicator implementations. To configure the severity order add the following to your application properties:

management.health.status.order=DOWN, OUT_OF_SERVICE, UNKNOWN, UP

You might also want to register custom status mappings with the HealthMvcEndpoint if you access the health endpoint over HTTP. For example you could map FATAL to HttpStatus.SERVICE_UNAVAILABLE.

46.7 Application information

Application information exposes various information collected from all InfoContributor beans defined in your ApplicationContext. Spring Boot includes a number of auto-configured InfoContributors and you can also write your own.

46.7.1 Auto-configured InfoContributors

The following InfoContributors are auto-configured by Spring Boot when appropriate:

NameDescription

EnvironmentInfoContributor

Expose any key from the Environment under the info key.

GitInfoContributor

Expose git information if a git.properties file is available.

BuildInfoContributor

Expose build information if a META-INF/build-info.properties file is available.

[Tip]Tip

It is possible to disable them all using the management.info.defaults.enabled property.

46.7.2 Custom application info information

You can customize the data exposed by the info endpoint by setting info.* Spring properties. All Environment properties under the info key will be automatically exposed. For example, you could add the following to your application.properties:

info.app.encoding=UTF-8
info.app.java.source=1.8
info.app.java.target=1.8
[Tip]Tip

Rather than hardcoding those values you could also expand info properties at build time.

Assuming you are using Maven, you could rewrite the example above as follows:

info.app.encoding[email protected]@
info.app.java.source[email protected]@
info.app.java.target[email protected]@

46.7.3 Git commit information

Another useful feature of the info endpoint is its ability to publish information about the state of your git source code repository when the project was built. If a GitProperties bean is available, the git.branch, git.commit.id and git.commit.time properties will be exposed.

[Tip]Tip

A GitProperties bean is auto-configured if a git.properties file is available at the root of the classpath. See Generate git information for more details.

If you want to display the full git information (i.e. the full content of git.properties), use the management.info.git.mode property:

management.info.git.mode=full

46.7.4 Build information

The info endpoint can also publish information about your build if a BuildProperties bean is available. This happens if a META-INF/build-info.properties file is available in the classpath.

[Tip]Tip

The Maven and Gradle plugins can both generate that file, see Generate build information for more details.

46.7.5 Writing custom InfoContributors

To provide custom application information you can register Spring beans that implement the InfoContributor interface.

The example below contributes an example entry with a single value:

import java.util.Collections;

import org.springframework.boot.actuate.info.Info;
import org.springframework.boot.actuate.info.InfoContributor;
import org.springframework.stereotype.Component;

@Component
public class ExampleInfoContributor implements InfoContributor {

    @Override
    public void contribute(Info.Builder builder) {
        builder.withDetail("example",
                Collections.singletonMap("key", "value"));
    }

}

If you hit the info endpoint you should see a response that contains the following additional entry:

{
    "example": {
        "key" : "value"
    }
}

47. Monitoring and management over HTTP

If you are developing a Spring MVC application, Spring Boot Actuator will auto-configure all enabled endpoints to be exposed over HTTP. The default convention is to use the id of the endpoint as the URL path. For example, health is exposed as /health.

47.1 Securing sensitive endpoints

If you add ‘Spring Security’ to your project, all sensitive endpoints exposed over HTTP will be protected. By default ‘basic’ authentication will be used with the username user and a generated password (which is printed on the console when the application starts).

[Tip]Tip

Generated passwords are logged as the application starts. Search for ‘Using default security password’.

You can use Spring properties to change the username and password and to change the security role(s) required to access the endpoints. For example, you might set the following in your application.properties:

security.user.name=admin
security.user.password=secret
management.security.roles=SUPERUSER
[Tip]Tip

If you don’t use Spring Security and your HTTP endpoints are exposed publicly, you should carefully consider which endpoints you enable. See Section 46.1, “Customizing endpoints” for details of how you can set endpoints.enabled to false then “opt-in” only specific endpoints.

47.2 Customizing the management endpoint paths

Sometimes it is useful to group all management endpoints under a single path. For example, your application might already use /info for another purpose. You can use the management.context-path property to set a prefix for your management endpoint:

management.context-path=/manage

The application.properties example above will change the endpoint from /{id} to /manage/{id} (e.g. /manage/info).

You can also change the “id” of an endpoint (using endpoints.{name}.id) which then changes the default resource path for the MVC endpoint. Legal endpoint ids are composed only of alphanumeric characters (because they can be exposed in a number of places, including JMX object names, where special characters are forbidden). The MVC path can be changed separately by configuring endpoints.{name}.path, and there is no validation on those values (so you can use anything that is legal in a URL path). For example, to change the location of the /health endpoint to /ping/me you can set endpoints.health.path=/ping/me.

[Tip]Tip

If you provide a custom MvcEndpoint remember to include a settable path property, and default it to /{id} if you want your code to behave like the standard MVC endpoints. (Take a look at the HealthMvcEndpoint to see how you might do that.) If your custom endpoint is an Endpoint (not an MvcEndpoint) then Spring Boot will take care of the path for you.

47.3 Customizing the management server port

Exposing management endpoints using the default HTTP port is a sensible choice for cloud based deployments. If, however, your application runs inside your own data center you may prefer to expose endpoints using a different HTTP port.

The management.port property can be used to change the HTTP port.

management.port=8081

Since your management port is often protected by a firewall, and not exposed to the public you might not need security on the management endpoints, even if your main application is secure. In that case you will have Spring Security on the classpath, and you can disable management security like this:

management.security.enabled=false

(If you don’t have Spring Security on the classpath then there is no need to explicitly disable the management security in this way, and it might even break the application.)

47.4 Configuring management-specific SSL

When configured to use a custom port, the management server can also be configured with its own SSL using the various management.ssl.* properties. For example, this allows a management server to be available via HTTP while the main application uses HTTPS:

server.port=8443
server.ssl.enabled=true
server.ssl.key-store=classpath:store.jks
server.ssl.key-password=secret
management.port=8080
management.ssl.enable=false

Alternatively, both the main server and the management server can use SSL but with different key stores:

server.port=8443
server.ssl.enabled=true
server.ssl.key-store=classpath:main.jks
server.ssl.key-password=secret
management.port=8080
management.ssl.enable=true
management.ssl.key-store=classpath:management.jks
management.ssl.key-password=secret

47.5 Customizing the management server address

You can customize the address that the management endpoints are available on by setting the management.address property. This can be useful if you want to listen only on an internal or ops-facing network, or to only listen for connections from localhost.

[Note]Note

You can only listen on a different address if the port is different to the main server port.

Here is an example application.properties that will not allow remote management connections:

management.port=8081
management.address=127.0.0.1

47.6 Disabling HTTP endpoints

If you don’t want to expose endpoints over HTTP you can set the management port to -1:

management.port=-1

47.7 HTTP health endpoint access restrictions

The information exposed by the health endpoint varies depending on whether or not it’s accessed anonymously, and whether or not the enclosing application is secure. By default, when accessed anonymously in a secure application, any details about the server’s health are hidden and the endpoint will simply indicate whether or not the server is up or down. Furthermore the response is cached for a configurable period to prevent the endpoint being used in a denial of service attack. The endpoints.health.time-to-live property is used to configure the caching period in milliseconds. It defaults to 1000, i.e. one second.

The above-described restrictions can be enhanced, thereby allowing only authenticated users full access to the health endpoint in a secure application. To do so, set endpoints.health.sensitive to true. Here’s a summary of behavior (with default sensitive flag value “false” indicated in bold):

management.security.enabledendpoints.health.sensitiveUnauthenticatedAuthenticated

false

false

Full content

Full content

false

true

Status only

Full content

true

false

Status only

Full content

true

true

No content

Full content

48. Monitoring and management over JMX

Java Management Extensions (JMX) provide a standard mechanism to monitor and manage applications. By default Spring Boot will expose management endpoints as JMX MBeans under the org.springframework.boot domain.

48.1 Customizing MBean names

The name of the MBean is usually generated from the id of the endpoint. For example the health endpoint is exposed as org.springframework.boot/Endpoint/healthEndpoint.

If your application contains more than one Spring ApplicationContext you may find that names clash. To solve this problem you can set the endpoints.jmx.unique-names property to true so that MBean names are always unique.

You can also customize the JMX domain under which endpoints are exposed. Here is an example application.properties:

endpoints.jmx.domain=myapp
endpoints.jmx.unique-names=true

48.2 Disabling JMX endpoints

If you don’t want to expose endpoints over JMX you can set the endpoints.jmx.enabled property to false:

endpoints.jmx.enabled=false

48.3 Using Jolokia for JMX over HTTP

Jolokia is a JMX-HTTP bridge giving an alternative method of accessing JMX beans. To use Jolokia, simply include a dependency to org.jolokia:jolokia-core. For example, using Maven you would add the following:

<dependency>
    <groupId>org.jolokia</groupId>
    <artifactId>jolokia-core</artifactId>
 </dependency>

Jolokia can then be accessed using /jolokia on your management HTTP server.

48.3.1 Customizing Jolokia

Jolokia has a number of settings that you would traditionally configure using servlet parameters. With Spring Boot you can use your application.properties, simply prefix the parameter with jolokia.config.:

jolokia.config.debug=true

48.3.2 Disabling Jolokia

If you are using Jolokia but you don’t want Spring Boot to configure it, simply set the endpoints.jolokia.enabled property to false:

endpoints.jolokia.enabled=false

49. Monitoring and management using a remote shell

Spring Boot supports an integrated Java shell called ‘CRaSH’. You can use CRaSH to ssh or telnet into your running application. To enable remote shell support, add the following dependency to your project:

<dependency>
    <groupId>org.springframework.boot</groupId>
    <artifactId>spring-boot-starter-remote-shell</artifactId>
 </dependency>
[Tip]Tip

If you want to also enable telnet access you will additionally need a dependency on org.crsh:crsh.shell.telnet.

[Note]Note

CRaSH requires to run with a JDK as it compiles commands on the fly. If a basic help command fails, you are probably running with a JRE.

49.1 Connecting to the remote shell

By default the remote shell will listen for connections on port 2000. The default user is user and the default password will be randomly generated and displayed in the log output. If your application is using Spring Security, the shell will use the same configuration by default. If not, a simple authentication will be applied and you should see a message like this:

Using default password for shell access: ec03e16c-4cf4-49ee-b745-7c8255c1dd7e

Linux and OSX users can use ssh to connect to the remote shell, Windows users can download and install PuTTY.

$ ssh -p 2000 [email protected]

[email protected]'s password:
  .   ____          _            __ _ _
 /\\ / ___'_ __ _ _(_)_ __  __ _ \ \ \ \
( ( )\___ | '_ | '_| | '_ \/ _` | \ \ \ \
 \\/  ___)| |_)| | | | | || (_| |  ) ) ) )
  '  |____| .__|_| |_|_| |_\__, | / / / /
 =========|_|==============|___/=/_/_/_/
 :: Spring Boot ::  (v1.4.1.RELEASE) on myhost

Type help for a list of commands. Spring Boot provides metrics, beans, autoconfig and endpoint commands.

49.1.1 Remote shell credentials

You can use the management.shell.auth.simple.user.name and management.shell.auth.simple.user.password properties to configure custom connection credentials. It is also possible to use a ‘Spring Security’ AuthenticationManager to handle login duties. See the CrshAutoConfiguration and ShellProperties Javadoc for full details.

49.2 Extending the remote shell

The remote shell can be extended in a number of interesting ways.

49.2.1 Remote shell commands

You can write additional shell commands using Groovy or Java (see the CRaSH documentation for details). By default Spring Boot will search for commands in the following locations:

  • classpath*:/commands/**
  • classpath*:/crash/commands/**
[Tip]Tip

You can change the search path by settings a shell.command-path-patterns property.

[Note]Note

If you are using an executable archive, any classes that a shell command depends upon must be packaged in a nested jar rather than directly in the executable jar or war.

Here is a simple ‘hello’ command that could be loaded from src/main/resources/commands/hello.groovy

package commands

import org.crsh.cli.Command
import org.crsh.cli.Usage
import org.crsh.command.InvocationContext

class hello {

    @Usage("Say Hello")
    @Command
    def main(InvocationContext context) {
        return "Hello"
    }

}

Spring Boot adds some additional attributes to InvocationContext that you can access from your command:

Attribute NameDescription

spring.boot.version

The version of Spring Boot

spring.version

The version of the core Spring Framework

spring.beanfactory

Access to the Spring BeanFactory

spring.environment

Access to the Spring Environment

49.2.2 Remote shell plugins

In addition to new commands, it is also possible to extend other CRaSH shell features. All Spring Beans that extend org.crsh.plugin.CRaSHPlugin will be automatically registered with the shell.

For more information please refer to the CRaSH reference documentation.

50. Metrics

Spring Boot Actuator includes a metrics service with ‘gauge’ and ‘counter’ support. A ‘gauge’ records a single value; and a ‘counter’ records a delta (an increment or decrement). Spring Boot Actuator also provides a PublicMetrics interface that you can implement to expose metrics that you cannot record via one of those two mechanisms. Look at SystemPublicMetrics for an example.

Metrics for all HTTP requests are automatically recorded, so if you hit the metrics endpoint you should see a response similar to this:

{
    "counter.status.200.root": 20,
    "counter.status.200.metrics": 3,
    "counter.status.200.star-star": 5,
    "counter.status.401.root": 4,
    "gauge.response.star-star": 6,
    "gauge.response.root": 2,
    "gauge.response.metrics": 3,
    "classes": 5808,
    "classes.loaded": 5808,
    "classes.unloaded": 0,
    "heap": 3728384,
    "heap.committed": 986624,
    "heap.init": 262144,
    "heap.used": 52765,
    "nonheap": 0,
    "nonheap.committed": 77568,
    "nonheap.init": 2496,
    "nonheap.used": 75826,
    "mem": 986624,
    "mem.free": 933858,
    "processors": 8,
    "threads": 15,
    "threads.daemon": 11,
    "threads.peak": 15,
    "threads.totalStarted": 42,
    "uptime": 494836,
    "instance.uptime": 489782,
    "datasource.primary.active": 5,
    "datasource.primary.usage": 0.25
}

Here we can see basic memory, heap, class loading, processor and thread pool information along with some HTTP metrics. In this instance the root (‘/’) and /metrics URLs have returned HTTP 200 responses 20 and 3 times respectively. It also appears that the root URL returned HTTP 401 (unauthorized) 4 times. The double asterisks (star-star) comes from a request matched by Spring MVC as /** (normally a static resource).

The gauge shows the last response time for a request. So the last request to root took 2ms to respond and the last to /metrics took 3ms.

[Note]Note

In this example we are actually accessing the endpoint over HTTP using the /metrics URL, this explains why metrics appears in the response.

50.1 System metrics

The following system metrics are exposed by Spring Boot:

  • The total system memory in KB (mem)
  • The amount of free memory in KB (mem.free)
  • The number of processors (processors)
  • The system uptime in milliseconds (uptime)
  • The application context uptime in milliseconds (instance.uptime)
  • The average system load (systemload.average)
  • Heap information in KB (heap, heap.committed, heap.init, heap.used)
  • Thread information (threads, thread.peak, thread.daemon)
  • Class load information (classes, classes.loaded, classes.unloaded)
  • Garbage collection information (gc.xxx.count, gc.xxx.time)

50.2 DataSource metrics

The following metrics are exposed for each supported DataSource defined in your application:

  • The number of active connections (datasource.xxx.active)
  • The current usage of the connection pool (datasource.xxx.usage).

All data source metrics share the datasource. prefix. The prefix is further qualified for each data source:

  • If the data source is the primary data source (that is either the only available data source or the one flagged @Primary amongst the existing ones), the prefix is datasource.primary.
  • If the data source bean name ends with DataSource, the prefix is the name of the bean without DataSource (i.e. datasource.batch for batchDataSource).
  • In all other cases, the name of the bean is used.

It is possible to override part or all of those defaults by registering a bean with a customized version of DataSourcePublicMetrics. By default, Spring Boot provides metadata for all supported data sources; you can add additional DataSourcePoolMetadataProvider beans if your favorite data source isn’t supported out of the box. See DataSourcePoolMetadataProvidersConfiguration for examples.

50.3 Cache metrics

The following metrics are exposed for each supported cache defined in your application:

  • The current size of the cache (cache.xxx.size)
  • Hit ratio (cache.xxx.hit.ratio)
  • Miss ratio (cache.xxx.miss.ratio)
[Note]Note

Cache providers do not expose the hit/miss ratio in a consistent way. While some expose an aggregated value (i.e. the hit ratio since the last time the stats were cleared), others expose a temporal value (i.e. the hit ratio of the last second). Check your caching provider documentation for more details.

If two different cache managers happen to define the same cache, the name of the cache is prefixed by the name of the CacheManager bean.

It is possible to override part or all of those defaults by registering a bean with a customized version of CachePublicMetrics. By default, Spring Boot provides cache statistics for EhCache, Hazelcast, Infinispan, JCache and Guava. You can add additional CacheStatisticsProvider beans if your favorite caching library isn’t supported out of the box. See CacheStatisticsAutoConfiguration for examples.

50.4 Tomcat session metrics

If you are using Tomcat as your embedded servlet container, session metrics will automatically be exposed. The httpsessions.active and httpsessions.max keys provide the number of active and maximum sessions.

50.5 Recording your own metrics

To record your own metrics inject a CounterService and/or GaugeService into your bean. The CounterService exposes increment, decrement and reset methods; the GaugeService provides a submit method.

Here is a simple example that counts the number of times that a method is invoked:

import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.boot.actuate.metrics.CounterService;
import org.springframework.stereotype.Service;

@Service
public class MyService {

    private final CounterService counterService;

    @Autowired
    public MyService(CounterService counterService) {
        this.counterService = counterService;
    }

    public void exampleMethod() {
        this.counterService.increment("services.system.myservice.invoked");
    }

}
[Tip]Tip

You can use any string as a metric name but you should follow guidelines of your chosen store/graphing technology. Some good guidelines for Graphite are available on Matt Aimonetti’s Blog.

50.6 Adding your own public metrics

To add additional metrics that are computed every time the metrics endpoint is invoked, simply register additional PublicMetrics implementation bean(s). By default, all such beans are gathered by the endpoint. You can easily change that by defining your own MetricsEndpoint.

50.7 Special features with Java 8

The default implementation of GaugeService and CounterService provided by Spring Boot depends on the version of Java that you are using. With Java 8 (or better) the implementation switches to a high-performance version optimized for fast writes, backed by atomic in-memory buffers, rather than by the immutable but relatively expensive Metric<?> type (counters are approximately 5 times faster and gauges approximately twice as fast as the repository-based implementations). The Dropwizard metrics services (see below) are also very efficient even for Java 7 (they have backports of some of the Java 8 concurrency libraries), but they do not record timestamps for metric values. If performance of metric gathering is a concern then it is always advisable to use one of the high-performance options, and also to only read metrics infrequently, so that the writes are buffered locally and only read when needed.

[Note]Note

The old MetricRepository and its InMemoryMetricRepository implementation are not used by default if you are on Java 8 or if you are using Dropwizard metrics.

50.8 Metric writers, exporters and aggregation

Spring Boot provides a couple of implementations of a marker interface called Exporter which can be used to copy metric readings from the in-memory buffers to a place where they can be analyzed and displayed. Indeed, if you provide a @Bean that implements the MetricWriter interface (or GaugeWriter for simple use cases) and mark it @ExportMetricWriter, then it will automatically be hooked up to an Exporter and fed metric updates every 5 seconds (configured via spring.metrics.export.delay-millis). In addition, any MetricReader that you define and mark as @ExportMetricReader will have its values exported by the default exporter.

The default exporter is a MetricCopyExporter which tries to optimize itself by not copying values that haven’t changed since it was last called (the optimization can be switched off using a flag spring.metrics.export.send-latest). Note also that the Dropwizard MetricRegistry has no support for timestamps, so the optimization is not available if you are using Dropwizard metrics (all metrics will be copied on every tick).

The default values for the export trigger (delay-millis, includes, excludes and send-latest) can be set as spring.metrics.export.*. Individual values for specific MetricWriters can be set as spring.metrics.export.triggers.<name>.* where <name> is a bean name (or pattern for matching bean names).

[Warning]Warning

The automatic export of metrics is disabled if you switch off the default MetricRepository (e.g. by using Dropwizard metrics). You can get back the same functionality be declaring a bean of your own of type MetricReader and declaring it to be @ExportMetricReader.

50.8.1 Example: Export to Redis

If you provide a @Bean of type RedisMetricRepository and mark it @ExportMetricWriter the metrics are exported to a Redis cache for aggregation. The RedisMetricRepository has two important parameters to configure it for this purpose: prefix and key (passed into its constructor). It is best to use a prefix that is unique to the application instance (e.g. using a random value and maybe the logical name of the application to make it possible to correlate with other instances of the same application). The “key” is used to keep a global index of all metric names, so it should be unique “globally”, whatever that means for your system (e.g. two instances of the same system could share a Redis cache if they have distinct keys).

Example:

@Bean
@ExportMetricWriter
MetricWriter metricWriter(MetricExportProperties export) {
	return new RedisMetricRepository(connectionFactory,
      export.getRedis().getPrefix(), export.getRedis().getKey());
}

application.properties. 

spring.metrics.export.redis.prefix: metrics.mysystem.${spring.application.name:application}.${random.value:0000}
spring.metrics.export.redis.key: keys.metrics.mysystem

The prefix is constructed with the application name and id at the end, so it can easily be used to identify a group of processes with the same logical name later.

[Note]Note

It’s important to set both the key and the prefix. The key is used for all repository operations, and can be shared by multiple repositories. If multiple repositories share a key (like in the case where you need to aggregate across them), then you normally have a read-only “master” repository that has a short, but identifiable, prefix (like “metrics.mysystem”), and many write-only repositories with prefixes that start with the master prefix (like metrics.mysystem.* in the example above). It is efficient to read all the keys from a “master” repository like that, but inefficient to read a subset with a longer prefix (e.g. using one of the writing repositories).

[Tip]Tip

The example above uses MetricExportProperties to inject and extract the key and prefix. This is provided to you as a convenience by Spring Boot, configured with sensible defaults. There is nothing to stop you using your own values as long as they follow the recommendations.

50.8.2 Example: Export to Open TSDB

If you provide a @Bean of type OpenTsdbGaugeWriter and mark it @ExportMetricWriter metrics are exported to Open TSDB for aggregation. The OpenTsdbGaugeWriter has a url property that you need to set to the Open TSDB “/put” endpoint, e.g. localhost:4242/api/put). It also has a namingStrategy that you can customize or configure to make the metrics match the data structure you need on the server. By default it just passes through the metric name as an Open TSDB metric name, and adds the tags “domain” (with value “org.springframework.metrics”) and “process” (with the value equal to the object hash of the naming strategy). Thus, after running the application and generating some metrics you can inspect the metrics in the TSD UI (localhost:4242 by default).

Example:

curl localhost:4242/api/query?start=1h-ago&m=max:counter.status.200.root
[
	{
		"metric": "counter.status.200.root",
		"tags": {
			"domain": "org.springframework.metrics",
			"process": "b968a76"
		},
		"aggregateTags": [],
		"dps": {
			"1430492872": 2,
			"1430492875": 6
		}
	}
]

50.8.3 Example: Export to Statsd

To export metrics to Statsd, make sure first that you have added com.timgroup:java-statsd-client as a dependency of your project (Spring Boot provides a dependency management for it). Then add a spring.metrics.export.statsd.host value to your application.properties file. Connections will be opened to port 8125 unless a spring.metrics.export.statsd.port override is provided. You can use spring.metrics.export.statsd.prefix if you want a custom prefix.

Alternatively, you can provide a @Bean of type StatsdMetricWriter and mark it @ExportMetricWriter:

@Value("${spring.application.name:application}.${random.value:0000}")
private String prefix = "metrics";

@Bean
@ExportMetricWriter
MetricWriter metricWriter() {
	return new StatsdMetricWriter(prefix, "localhost", 8125);
}

50.8.4 Example: Export to JMX

If you provide a @Bean of type JmxMetricWriter marked @ExportMetricWriter the metrics are exported as MBeans to the local server (the MBeanExporter is provided by Spring Boot JMX auto-configuration as long as it is switched on). Metrics can then be inspected, graphed, alerted etc. using any tool that understands JMX (e.g. JConsole or JVisualVM).

Example:

@Bean
@ExportMetricWriter
MetricWriter metricWriter(MBeanExporter exporter) {
	return new JmxMetricWriter(exporter);
}

Each metric is exported as an individual MBean. The format for the ObjectNames is given by an ObjectNamingStrategy which can be injected into the JmxMetricWriter (the default breaks up the metric name and tags the first two period-separated sections in a way that should make the metrics group nicely in JVisualVM or JConsole).

50.9 Aggregating metrics from multiple sources

There is an AggregateMetricReader that you can use to consolidate metrics from different physical sources. Sources for the same logical metric just need to publish them with a period-separated prefix, and the reader will aggregate (by truncating the metric names, and dropping the prefix). Counters are summed and everything else (i.e. gauges) take their most recent value.

This is very useful if multiple application instances are feeding to a central (e.g. Redis) repository and you want to display the results. Particularly recommended in conjunction with a MetricReaderPublicMetrics for hooking up to the results to the “/metrics” endpoint.

Example:

@Autowired
private MetricExportProperties export;

@Bean
public PublicMetrics metricsAggregate() {
  return new MetricReaderPublicMetrics(aggregatesMetricReader());
}

private MetricReader globalMetricsForAggregation() {
  return new RedisMetricRepository(this.connectionFactory,
      this.export.getRedis().getAggregatePrefix(), this.export.getRedis().getKey());
}

private MetricReader aggregatesMetricReader() {
  AggregateMetricReader repository = new AggregateMetricReader(
      globalMetricsForAggregation());
  return repository;
}
[Note]Note

The example above uses MetricExportProperties to inject and extract the key and prefix. This is provided to you as a convenience by Spring Boot, and the defaults will be sensible. They are set up in MetricExportAutoConfiguration.

[Note]Note

The MetricReaders above are not @Beans and are not marked as @ExportMetricReader because they are just collecting and analyzing data from other repositories, and don’t want to export their values.

50.10 Dropwizard Metrics

A default MetricRegistry Spring bean will be created when you declare a dependency to the io.dropwizard.metrics:metrics-core library; you can also register you own @Bean instance if you need customizations. Users of the Dropwizard ‘Metrics’ library will find that Spring Boot metrics are automatically published to com.codahale.metrics.MetricRegistry. Metrics from the MetricRegistry are also automatically exposed via the /metrics endpoint

When Dropwizard metrics are in use, the default CounterService and GaugeService are replaced with a DropwizardMetricServices, which is a wrapper around the MetricRegistry (so you can @Autowired one of those services and use it as normal). You can also create “special” Dropwizard metrics by prefixing your metric names with the appropriate type (i.e. timer.*, histogram.* for gauges, and meter.* for counters).

50.11 Message channel integration

If a MessageChannel bean called metricsChannel exists, then a MetricWriter will be created that writes metrics to that channel. The writer is automatically hooked up to an exporter (as for all writers), so all metric values will appear on the channel, and additional analysis or actions can be taken by subscribers (it’s up to you to provide the channel and any subscribers you need).

51. Auditing

Spring Boot Actuator has a flexible audit framework that will publish events once Spring Security is in play (‘authentication success’, ‘failure’ and ‘access denied’ exceptions by default). This can be very useful for reporting, and also to implement a lock-out policy based on authentication failures. To customize published security events you can provide your own implementations of AbstractAuthenticationAuditListener and AbstractAuthorizationAuditListener.

You can also choose to use the audit services for your own business events. To do that you can either inject the existing AuditEventRepository into your own components and use that directly, or you can simply publish AuditApplicationEvent via the Spring ApplicationEventPublisher (using ApplicationEventPublisherAware).

52. Tracing

Tracing is automatically enabled for all HTTP requests. You can view the trace endpoint and obtain basic information about the last 100 requests:

[{
    "timestamp": 1394343677415,
    "info": {
      "method": "GET",
      "path": "/trace",
      "headers": {
        "request": {
          "Accept": "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8",
          "Connection": "keep-alive",
          "Accept-Encoding": "gzip, deflate",
          "User-Agent": "Mozilla/5.0 Gecko/Firefox",
          "Accept-Language": "en-US,en;q=0.5",
          "Cookie": "_ga=GA1.1.827067509.1390890128; ..."
          "Authorization": "Basic ...",
          "Host": "localhost:8080"
        },
        "response": {
          "Strict-Transport-Security": "max-age=31536000 ; includeSubDomains",
          "X-Application-Context": "application:8080",
          "Content-Type": "application/json;charset=UTF-8",
          "status": "200"
        }
      }
    }
  },{
    "timestamp": 1394343684465,
    ...
    }]

52.1 Custom tracing

If you need to trace additional events you can inject a TraceRepository into your Spring beans. The add method accepts a single Map structure that will be converted to JSON and logged.

By default an InMemoryTraceRepository will be used that stores the last 100 events. You can define your own instance of the InMemoryTraceRepository bean if you need to expand the capacity. You can also create your own alternative TraceRepository implementation if needed.

53. Process monitoring

In Spring Boot Actuator you can find a couple of classes to create files that are useful for process monitoring:

  • ApplicationPidFileWriter creates a file containing the application PID (by default in the application directory with the file name application.pid).
  • EmbeddedServerPortFileWriter creates a file (or files) containing the ports of the embedded server (by default in the application directory with the file name application.port).

These writers are not activated by default, but you can enable them in one of the ways described below.

53.1 Extend configuration

In META-INF/spring.factories file you can activate the listener(s) that writes a PID file. Example:

org.springframework.context.ApplicationListener=\
org.springframework.boot.actuate.system.ApplicationPidFileWriter,
org.springframework.boot.actuate.system.EmbeddedServerPortFileWriter

53.2 Programmatically

You can also activate a listener by invoking the SpringApplication.addListeners(…​) method and passing the appropriate Writer object. This method also allows you to customize the file name and path via the Writer constructor.

54. What to read next

If you want to explore some of the concepts discussed in this chapter, you can take a look at the actuator sample applications. You also might want to read about graphing tools such as Graphite.

Otherwise, you can continue on, to read about ‘deployment options’ or jump ahead for some in-depth information about Spring Boot’s build tool plugins.

Part VI. Deploying Spring Boot applications

Spring Boot’s flexible packaging options provide a great deal of choice when it comes to deploying your application. You can easily deploy Spring Boot applications to a variety of cloud platforms, to a container images (such as Docker) or to virtual/real machines.

This section covers some of the more common deployment scenarios.

55. Deploying to the cloud

Spring Boot’s executable jars are ready-made for most popular cloud PaaS (platform-as-a-service) providers. These providers tend to require that you “bring your own container”; they manage application processes (not Java applications specifically), so they need some intermediary layer that adapts your application to the cloud’s notion of a running process.

Two popular cloud providers, Heroku and Cloud Foundry, employ a “buildpack” approach. The buildpack wraps your deployed code in whatever is needed to start your application: it might be a JDK and a call to java, it might be an embedded web server, or it might be a full-fledged application server. A buildpack is pluggable, but ideally you should be able to get by with as few customizations to it as possible. This reduces the footprint of functionality that is not under your control. It minimizes divergence between development and production environments.

Ideally, your application, like a Spring Boot executable jar, has everything that it needs to run packaged within it.

In this section we’ll look at what it takes to get the simple application that we developed in the “Getting Started” section up and running in the Cloud.

55.1 Cloud Foundry

Cloud Foundry provides default buildpacks that come into play if no other buildpack is specified. The Cloud Foundry Java buildpack has excellent support for Spring applications, including Spring Boot. You can deploy stand-alone executable jar applications, as well as traditional .war packaged applications.

Once you’ve built your application (using, for example, mvn clean package) and installed the cf command line tool, simply deploy your application using the cf push command as follows, substituting the path to your compiled .jar. Be sure to have logged in with your cf command line client before pushing an application.

$ cf push acloudyspringtime -p target/demo-0.0.1-SNAPSHOT.jar

See the cf push documentation for more options. If there is a Cloud Foundry manifest.yml file present in the same directory, it will be consulted.

[Note]Note

Here we are substituting acloudyspringtime for whatever value you give cf as the name of your application.

At this point cf will start uploading your application:

Uploading acloudyspringtime... OK
Preparing to start acloudyspringtime... OK
-----> Downloaded app package (8.9M)
-----> Java Buildpack source: system
-----> Downloading Open JDK 1.7.0_51 from .../x86_64/openjdk-1.7.0_51.tar.gz (1.8s)
       Expanding Open JDK to .java-buildpack/open_jdk (1.2s)
-----> Downloading Spring Auto Reconfiguration from  0.8.7 .../auto-reconfiguration-0.8.7.jar (0.1s)
-----> Uploading droplet (44M)
Checking status of app 'acloudyspringtime'...
  0 of 1 instances running (1 starting)
  ...
  0 of 1 instances running (1 down)
  ...
  0 of 1 instances running (1 starting)
  ...
  1 of 1 instances running (1 running)

App started

Congratulations! The application is now live!

It’s easy to then verify the status of the deployed application:

$ cf apps
Getting applications in ...
OK

name                 requested state   instances   memory   disk   urls
...
acloudyspringtime    started           1/1         512M     1G     acloudyspringtime.cfapps.io
...

Once Cloud Foundry acknowledges that your application has been deployed, you should be able to hit the application at the URI given, in this case http://acloudyspringtime.cfapps.io/.

55.1.1 Binding to services

By default, metadata about the running application as well as service connection information is exposed to the application as environment variables (for example: $VCAP_SERVICES). This architecture decision is due to Cloud Foundry’s polyglot (any language and platform can be supported as a buildpack) nature; process-scoped environment variables are language agnostic.

Environment variables don’t always make for the easiest API so Spring Boot automatically extracts them and flattens the data into properties that can be accessed through Spring’s Environment abstraction:

@Component
class MyBean implements EnvironmentAware {

    private String instanceId;

    @Override
    public void setEnvironment(Environment environment) {
        this.instanceId = environment.getProperty("vcap.application.instance_id");
    }

    // ...

}

All Cloud Foundry properties are prefixed with vcap. You can use vcap properties to access application information (such as the public URL of the application) and service information (such as database credentials). See CloudFoundryVcapEnvironmentPostProcessor Javadoc for complete details.

[Tip]Tip

The Spring Cloud Connectors project is a better fit for tasks such as configuring a DataSource. Spring Boot includes auto-configuration support and a spring-boot-starter-cloud-connectors starter.

55.2 Heroku

Heroku is another popular PaaS platform. To customize Heroku builds, you provide a Procfile, which provides the incantation required to deploy an application. Heroku assigns a port for the Java application to use and then ensures that routing to the external URI works.

You must configure your application to listen on the correct port. Here’s the Procfile for our starter REST application:

web: java -Dserver.port=$PORT -jar target/demo-0.0.1-SNAPSHOT.jar

Spring Boot makes -D arguments available as properties accessible from a Spring Environment instance. The server.port configuration property is fed to the embedded Tomcat, Jetty or Undertow instance which then uses it when it starts up. The $PORT environment variable is assigned to us by the Heroku PaaS.

Heroku by default will use Java 1.8. This is fine as long as your Maven or Gradle build is set to use the same version (Maven users can use the java.version property). If you want to use JDK 1.7, create a new file adjacent to your pom.xml and Procfile, called system.properties. In this file add the following:

java.runtime.version=1.7

This should be everything you need. The most common workflow for Heroku deployments is to git push the code to production.

$ git push heroku master

Initializing repository, done.
Counting objects: 95, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (78/78), done.
Writing objects: 100% (95/95), 8.66 MiB | 606.00 KiB/s, done.
Total 95 (delta 31), reused 0 (delta 0)

-----> Java app detected
-----> Installing OpenJDK 1.8... done
-----> Installing Maven 3.3.1... done
-----> Installing settings.xml... done
-----> Executing: mvn -B -DskipTests=true clean install

       [INFO] Scanning for projects...
       Downloading: http://repo.spring.io/...
       Downloaded: http://repo.spring.io/... (818 B at 1.8 KB/sec)
        ....
       Downloaded: http://s3pository.heroku.com/jvm/... (152 KB at 595.3 KB/sec)
       [INFO] Installing /tmp/build_0c35a5d2-a067-4abc-a232-14b1fb7a8229/target/...
       [INFO] Installing /tmp/build_0c35a5d2-a067-4abc-a232-14b1fb7a8229/pom.xml ...
       [INFO] ------------------------------------------------------------------------
       [INFO] BUILD SUCCESS
       [INFO] ------------------------------------------------------------------------
       [INFO] Total time: 59.358s
       [INFO] Finished at: Fri Mar 07 07:28:25 UTC 2014
       [INFO] Final Memory: 20M/493M
       [INFO] ------------------------------------------------------------------------

-----> Discovering process types
       Procfile declares types -> web

-----> Compressing... done, 70.4MB
-----> Launching... done, v6
       http://agile-sierra-1405.herokuapp.com/ deployed to Heroku

To [email protected]:agile-sierra-1405.git
 * [new branch]      master -> master

Your application should now be up and running on Heroku.

55.3 OpenShift

OpenShift is the RedHat public (and enterprise) PaaS solution. Like Heroku, it works by running scripts triggered by git commits, so you can script the launching of a Spring Boot application in pretty much any way you like as long as the Java runtime is available (which is a standard feature you can ask for at OpenShift). To do this you can use the DIY Cartridge and hooks in your repository under .openshift/action_hooks:

The basic model is to:

  1. Ensure Java and your build tool are installed remotely, e.g. using a pre_build hook (Java and Maven are installed by default, Gradle is not)
  2. Use a build hook to build your jar (using Maven or Gradle), e.g.

    #!/bin/bash
    cd $OPENSHIFT_REPO_DIR
    mvn package -s .openshift/settings.xml -DskipTests=true
  3. Add a start hook that calls java -jar …​

    #!/bin/bash
    cd $OPENSHIFT_REPO_DIR
    nohup java -jar target/*.jar --server.port=${OPENSHIFT_DIY_PORT} --server.address=${OPENSHIFT_DIY_IP} &
  4. Use a stop hook (since the start is supposed to return cleanly), e.g.

    #!/bin/bash
    source $OPENSHIFT_CARTRIDGE_SDK_BASH
    PID=$(ps -ef | grep java.*\.jar | grep -v grep | awk '{ print $2 }')
    if [ -z "$PID" ]
    then
        client_result "Application is already stopped"
    else
        kill $PID
    fi
  5. Embed service bindings from environment variables provided by the platform in your application.properties, e.g.

    spring.datasource.url: jdbc:mysql://${OPENSHIFT_MYSQL_DB_HOST}:${OPENSHIFT_MYSQL_DB_PORT}/${OPENSHIFT_APP_NAME}
    spring.datasource.username: ${OPENSHIFT_MYSQL_DB_USERNAME}
    spring.datasource.password: ${OPENSHIFT_MYSQL_DB_PASSWORD}

There’s a blog on running Gradle in OpenShift on their website that will get you started with a gradle build to run the app.

55.4 Boxfuse and Amazon Web Services

Boxfuse works by turning your Spring Boot executable jar or war into a minimal VM image that can be deployed unchanged either on VirtualBox or on AWS. Boxfuse comes with deep integration for Spring Boot and will use the information from your Spring Boot configuration file to automatically configure ports and health check URLs. Boxfuse leverages this information both for the images it produces as well as for all the resources it provisions (instances, security groups, elastic load balancers, etc).

Once you have created a Boxfuse account, connected it to your AWS account, and installed the latest version of the Boxfuse Client, you can deploy your Spring Boot application to AWS as follows (ensure the application has been built by Maven or Gradle first using, for example, mvn clean package):

$ boxfuse run myapp-1.0.jar -env=prod

See the boxfuse run documentation for more options. If there is a boxfuse.com/docs/commandline/#configuration [boxfuse.conf] file present in the current directory, it will be consulted.

[Tip]Tip

By default Boxfuse will activate a Spring profile named boxfuse on startup and if your executable jar or war contains an boxfuse.com/docs/payloads/springboot.html#configuration [application-boxfuse.properties] file, Boxfuse will base its configuration based on the properties it contains.

At this point boxfuse will create an image for your application, upload it, and then configure and start the necessary resources on AWS:

Fusing Image for myapp-1.0.jar ...
Image fused in 00:06.838s (53937 K) -> axelfontaine/myapp:1.0
Creating axelfontaine/myapp ...
Pushing axelfontaine/myapp:1.0 ...
Verifying axelfontaine/myapp:1.0 ...
Creating Elastic IP ...
Mapping myapp-axelfontaine.boxfuse.io to 52.28.233.167 ...
Waiting for AWS to create an AMI for axelfontaine/myapp:1.0 in eu-central-1 (this may take up to 50 seconds) ...
AMI created in 00:23.557s -> ami-d23f38cf
Creating security group boxfuse-sg_axelfontaine/myapp:1.0 ...
Launching t2.micro instance of axelfontaine/myapp:1.0 (ami-d23f38cf) in eu-central-1 ...
Instance launched in 00:30.306s -> i-92ef9f53
Waiting for AWS to boot Instance i-92ef9f53 and Payload to start at http://52.28.235.61/ ...
Payload started in 00:29.266s -> http://52.28.235.61/
Remapping Elastic IP 52.28.233.167 to i-92ef9f53 ...
Waiting 15s for AWS to complete Elastic IP Zero Downtime transition ...
Deployment completed successfully. axelfontaine/myapp:1.0 is up and running at http://myapp-axelfontaine.boxfuse.io/

Your application should now be up and running on AWS.

There’s a blog on deploying Spring Boot apps on EC2 as well as documentation for the Boxfuse Spring Boot integration on their website that will get you started with a Maven build to run the app.

55.5 Google App Engine

Google App Engine is tied to the Servlet 2.5 API, so you can’t deploy a Spring Application there without some modifications. See the Servlet 2.5 section of this guide.

56. Installing Spring Boot applications

In additional to running Spring Boot applications using java -jar it is also possible to make fully executable applications for Unix systems. This makes it very easy to install and manage Spring Boot applications in common production environments.

To create a ‘fully executable’ jar with Maven use the following plugin configuration:

<plugin>
    <groupId>org.springframework.boot</groupId>
    <artifactId>spring-boot-maven-plugin</artifactId>
    <configuration>
        <executable>true</executable>
    </configuration>
</plugin>

With Gradle, the equivalent configuration would be:

apply plugin: 'spring-boot'

springBoot {
    executable = true
}

You can then run your application by typing ./my-application.jar (where my-application is the name of your artifact).

[Note]Note

Fully executable jars work by embedding an extra script at the front of the file. Not all tools currently accept this format so you may not always be able to use this technique.

[Note]Note

The default script supports most Linux distributions and is tested on CentOS and Ubuntu. Other platforms, such as OS X and FreeBSD, will require the use of a custom embeddedLaunchScript.

[Note]Note

When a fully executable jar is run, it uses the jar’s directory as the working directory.

56.1 Unix/Linux services

Spring Boot application can be easily started as Unix/Linux services using either init.d or systemd.

56.1.1 Installation as an init.d service (System V)

If you’ve configured Spring Boot’s Maven or Gradle plugin to generate a fully executable jar, and you’re not using a custom embeddedLaunchScript, then your application can be used as an init.d service. Simply symlink the jar to init.d to support the standard start, stop, restart and status commands.

The script supports the following features:

  • Starts the services as the user that owns the jar file
  • Tracks application’s PID using /var/run/<appname>/<appname>.pid
  • Writes console logs to /var/log/<appname>.log

Assuming that you have a Spring Boot application installed in /var/myapp, to install a Spring Boot application as an init.d service simply create a symlink:

$ sudo ln -s /var/myapp/myapp.jar /etc/init.d/myapp

Once installed, you can start and stop the service in the usual way. For example, on a Debian based system:

$ service myapp start
[Tip]Tip

If your application fails to start, check the log file written to /var/log/<appname>.log for errors.

You can also flag the application to start automatically using your standard operating system tools. For example, on Debian:

$ update-rc.d myapp defaults <priority>

Securing an init.d service

[Note]Note

The following is a set of guidelines on how to secure a Spring Boot application that’s being run as an init.d service. It is not intended to be an exhaustive list of everything that should be done to harden an application and the environment in which it runs.

When executed as root, as is the case when root is being used to start an init.d service, the default executable script will run the application as the user which owns the jar file. You should never run a Spring Boot application as root so your application’s jar file should never be owned by root. Instead, create a specific user to run your application and use chown to make it the owner of the jar file. For example:

$ chown bootapp:bootapp your-app.jar

In this case, the default executable script will run the application as the bootapp user.

[Tip]Tip

To reduce the chances of the application’s user account being compromised, you should consider preventing it from using a login shell. Set the account’s shell to /usr/sbin/nologin, for example.

You should also take steps to prevent the modification of your application’s jar file. Firstly, configure its permissions so that it cannot be written and can only be read or executed by its owner:

$ chmod 500 your-app.jar

Secondly, you should also take steps to limit the damage if your application or the account that’s running it is compromised. If an attacker does gain access, they could make the jar file writable and change its contents. One way to protect against this is to make it immutable using chattr:

$ sudo chattr +i your-app.jar

This will prevent any user, including root, from modifying the jar.

If root is used to control the application’s service and you use a .conf file to customize its startup, the .conf file will be read and evaluated by the root user. It should be secured accordingly. Use chmod so that the file can only be read by the owner and use chown to make root the owner:

$ chmod 400 your-app.conf
$ sudo chown root:root your-app.conf

56.1.2 Installation as a systemd service

Systemd is the successor of the System V init system, and is now being used by many modern Linux distributions. Although you can continue to use init.d scripts with systemd, it is also possible to launch Spring Boot applications using systemd ‘service’ scripts.

Assuming that you have a Spring Boot application installed in /var/myapp, to install a Spring Boot application as a systemd service create a script named myapp.service using the following example and place it in /etc/systemd/system directory:

[Unit]
Description=myapp
After=syslog.target

[Service]
User=myapp
ExecStart=/var/myapp/myapp.jar
SuccessExitStatus=143

[Install]
WantedBy=multi-user.target
[Tip]Tip

Remember to change the Description, User and ExecStart fields for your application.

Note that unlike when running as an init.d service, user that runs the application, PID file and console log file behave differently under systemd and must be configured using appropriate fields in ‘service’ script. Consult the service unit configuration man page for more details.

To flag the application to start automatically on system boot use the following command:

$ systemctl enable myapp.service

Refer to man systemctl for more details.

56.1.3 Customizing the startup script

The default embedded startup script written by the Maven or Gradle plugin can be customized in a number of ways. For most people, using the default script along with a few customizations is usually enough. If you find you can’t customize something that you need to, you can always use the embeddedLaunchScript option to write your own file entirely.

Customizing script when it’s written

It often makes sense to customize elements of the start script as it’s written into the jar file. For example, init.d scripts can provide a “description” and, since you know this up front (and it won’t change), you may as well provide it when the jar is generated.

To customize written elements, use the embeddedLaunchScriptProperties option of the Spring Boot Maven or Gradle plugins.

The following property substitutions are supported with the default script:

NameDescription

mode

The script mode. Defaults to auto.

initInfoProvides

The Provides section of “INIT INFO”. Defaults to spring-boot-application for Gradle and to ${project.artifactId} for Maven.

initInfoShortDescription

The Short-Description section of “INIT INFO”. Defaults to Spring Boot Application for Gradle and to ${project.name} for Maven.

initInfoDescription

The Description section of “INIT INFO”. Defaults to Spring Boot Application for Gradle and to ${project.description} (falling back to ${project.name}) for Maven.

initInfoChkconfig

The chkconfig section of “INIT INFO”. Defaults to 2345 99 01.

confFolder

The default value for CONF_FOLDER. Defaults to the folder containing the jar.

logFolder

The default value for LOG_FOLDER. Only valid for an init.d service.

pidFolder

The default value for PID_FOLDER. Only valid for an init.d service.

useStartStopDaemon

If the start-stop-daemon command, when it’s available, should be used to control the process. Defaults to true.

Customizing script when it runs

For items of the script that need to be customized after the jar has been written you can use environment variables or a config file.

The following environment properties are supported with the default script:

VariableDescription

MODE

The “mode” of operation. The default depends on the way the jar was built, but will usually be auto (meaning it tries to guess if it is an init script by checking if it is a symlink in a directory called init.d). You can explicitly set it to service so that the stop|start|status|restart commands work, or to run if you just want to run the script in the foreground.

USE_START_STOP_DAEMON

If the start-stop-daemon command, when it’s available, should be used to control the process. Defaults to true.

PID_FOLDER

The root name of the pid folder (/var/run by default).

LOG_FOLDER

The name of the folder to put log files in (/var/log by default).

CONF_FOLDER

The name of the folder to read .conf files from (same folder as jar-file by default).

LOG_FILENAME

The name of the log file in the LOG_FOLDER (<appname>.log by default).

APP_NAME

The name of the app. If the jar is run from a symlink the script guesses the app name, but if it is not a symlink, or you want to explicitly set the app name this can be useful.

RUN_ARGS

The arguments to pass to the program (the Spring Boot app).

JAVA_HOME

The location of the java executable is discovered by using the PATH by default, but you can set it explicitly if there is an executable file at $JAVA_HOME/bin/java.

JAVA_OPTS

Options that are passed to the JVM when it is launched.

JARFILE

The explicit location of the jar file, in case the script is being used to launch a jar that it is not actually embedded in.

DEBUG

if not empty will set the -x flag on the shell process, making it easy to see the logic in the script.

[Note]Note

The PID_FOLDER, LOG_FOLDER and LOG_FILENAME variables are only valid for an init.d service. With systemd the equivalent customizations are made using ‘service’ script. Check the service unit configuration man page for more details.

With the exception of JARFILE and APP_NAME, the above settings can be configured using a .conf file. The file is expected next to the jar file and have the same name but suffixed with .conf rather than .jar. For example, a jar named /var/myapp/myapp.jar will use the configuration file named /var/myapp/myapp.conf.

myapp.conf. 

JAVA_OPTS=-Xmx1024M
LOG_FOLDER=/custom/log/folder

[Tip]Tip

You can use a CONF_FOLDER environment variable to customize the location of the config file if you don’t like it living next to the jar.

To learn about securing this file appropriately, please refer to the guidelines for securing an init.d service.

56.2 Microsoft Windows services

Spring Boot application can be started as Windows service using winsw.

A sample maintained separately to the core of Spring Boot describes step-by-step how you can create a Windows service for your Spring Boot application.

57. What to read next

Check out the Cloud Foundry, Heroku, OpenShift and Boxfuse web sites for more information about the kinds of features that a PaaS can offer. These are just four of the most popular Java PaaS providers, since Spring Boot is so amenable to cloud-based deployment you’re free to consider other providers as well.

The next section goes on to cover the Spring Boot CLI; or you can jump ahead to read about build tool plugins.

Part VII. Spring Boot CLI

The Spring Boot CLI is a command line tool that can be used if you want to quickly develop with Spring. It allows you to run Groovy scripts, which means that you have a familiar Java-like syntax, without so much boilerplate code. You can also bootstrap a new project or write your own command for it.

58. Installing the CLI

The Spring Boot CLI can be installed manually; using SDKMAN! (the SDK Manager) or using Homebrew or MacPorts if you are an OSX user. See Section 10.2, “Installing the Spring Boot CLI” in the “Getting started” section for comprehensive installation instructions.

59. Using the CLI

Once you have installed the CLI you can run it by typing spring. If you run spring without any arguments, a simple help screen is displayed:

$ spring
usage: spring [--help] [--version]
       <command> [<args>]

Available commands are:

  run [options] <files> [--] [args]
    Run a spring groovy script

  ... more command help is shown here

You can use help to get more details about any of the supported commands. For example:

$ spring help run
spring run - Run a spring groovy script

usage: spring run [options] <files> [--] [args]

Option                     Description
------                     -----------
--autoconfigure [Boolean]  Add autoconfigure compiler
                             transformations (default: true)
--classpath, -cp           Additional classpath entries
-e, --edit                 Open the file with the default system
                             editor
--no-guess-dependencies    Do not attempt to guess dependencies
--no-guess-imports         Do not attempt to guess imports
-q, --quiet                Quiet logging
-v, --verbose              Verbose logging of dependency
                             resolution
--watch                    Watch the specified file for changes

The version command provides a quick way to check which version of Spring Boot you are using.

$ spring version
Spring CLI v1.4.1.RELEASE

59.1 Running applications using the CLI

You can compile and run Groovy source code using the run command. The Spring Boot CLI is completely self-contained so you don’t need any external Groovy installation.

Here is an example “hello world” web application written in Groovy:

hello.groovy. 

@RestController
class WebApplication {

    @RequestMapping("/")
    String home() {
        "Hello World!"
    }

}

To compile and run the application type:

$ spring run hello.groovy

To pass command line arguments to the application, you need to use a -- to separate them from the “spring” command arguments, e.g.

$ spring run hello.groovy -- --server.port=9000

To set JVM command line arguments you can use the JAVA_OPTS environment variable, e.g.

$ JAVA_OPTS=-Xmx1024m spring run hello.groovy

59.1.1 Deduced “grab” dependencies

Standard Groovy includes a @Grab annotation which allows you to declare dependencies on a third-party libraries. This useful technique allows Groovy to download jars in the same way as Maven or Gradle would, but without requiring you to use a build tool.

Spring Boot extends this technique further, and will attempt to deduce which libraries to “grab” based on your code. For example, since the WebApplication code above uses @RestController annotations, “Tomcat” and “Spring MVC” will be grabbed.

The following items are used as “grab hints”:

ItemsGrabs

JdbcTemplate, NamedParameterJdbcTemplate, DataSource

JDBC Application.

@EnableJms

JMS Application.

@EnableCaching

Caching abstraction.

@Test

JUnit.

@EnableRabbit

RabbitMQ.

@EnableReactor

Project Reactor.

extends Specification

Spock test.

@EnableBatchProcessing

Spring Batch.

@MessageEndpoint @EnableIntegrationPatterns

Spring Integration.

@EnableDeviceResolver

Spring Mobile.

@Controller @RestController @EnableWebMvc

Spring MVC + Embedded Tomcat.

@EnableWebSecurity

Spring Security.

@EnableTransactionManagement

Spring Transaction Management.

[Tip]Tip

See subclasses of CompilerAutoConfiguration in the Spring Boot CLI source code to understand exactly how customizations are applied.

59.1.2 Deduced “grab” coordinates

Spring Boot extends Groovy’s standard @Grab support by allowing you to specify a dependency without a group or version, for example @Grab('freemarker'). This will consult Spring Boot’s default dependency metadata to deduce the artifact’s group and version. Note that the default metadata is tied to the version of the CLI that you’re using – it will only change when you move to a new version of the CLI, putting you in control of when the versions of your dependencies may change. A table showing the dependencies and their versions that are included in the default metadata can be found in the appendix.

59.1.3 Default import statements

To help reduce the size of your Groovy code, several import statements are automatically included. Notice how the example above refers to @Component, @RestController and @RequestMapping without needing to use fully-qualified names or import statements.

[Tip]Tip

Many Spring annotations will work without using import statements. Try running your application to see what fails before adding imports.

59.1.4 Automatic main method

Unlike the equivalent Java application, you do not need to include a public static void main(String[] args) method with your Groovy scripts. A SpringApplication is automatically created, with your compiled code acting as the source.

59.1.5 Custom dependency management

By default, the CLI uses the dependency management declared in spring-boot-dependencies when resolving @Grab dependencies. Additional dependency management, that will override the default dependency management, can be configured using the @DependencyManagementBom annotation. The annotation’s value should specify the coordinates (groupId:artifactId:version) of one or more Maven BOMs.

For example, the following declaration:

@DependencyManagementBom("com.example.custom-bom:1.0.0")

Will pick up custom-bom-1.0.0.pom in a Maven repository under com/example/custom-versions/1.0.0/.

When multiple BOMs are specified they are applied in the order that they’re declared. For example:

@DependencyManagementBom(["com.example.custom-bom:1.0.0",
        "com.example.another-bom:1.0.0"])

indicates that dependency management in another-bom will override the dependency management in custom-bom.

You can use @DependencyManagementBom anywhere that you can use @Grab, however, to ensure consistent ordering of the dependency management, you can only use @DependencyManagementBom at most once in your application. A useful source of dependency management (that is a superset of Spring Boot’s dependency management) is the Spring IO Platform, e.g. @DependencyManagementBom('io.spring.platform:platform-bom:1.1.2.RELEASE').

59.2 Testing your code

The test command allows you to compile and run tests for your application. Typical usage looks like this:

$ spring test app.groovy tests.groovy
Total: 1, Success: 1, : Failures: 0
Passed? true

In this example, tests.groovy contains JUnit @Test methods or Spock Specification classes. All the common framework annotations and static methods should be available to you without having to import them.

Here is the tests.groovy file that we used above (with a JUnit test):

class ApplicationTests {

    @Test
    void homeSaysHello() {
        assertEquals("Hello World!", new WebApplication().home())
    }

}
[Tip]Tip

If you have more than one test source files, you might prefer to organize them into a test directory.

59.3 Applications with multiple source files

You can use “shell globbing” with all commands that accept file input. This allows you to easily use multiple files from a single directory, e.g.

$ spring run *.groovy

This technique can also be useful if you want to segregate your “test” or “spec” code from the main application code:

$ spring test app/*.groovy test/*.groovy

59.4 Packaging your application

You can use the jar command to package your application into a self-contained executable jar file. For example:

$ spring jar my-app.jar *.groovy

The resulting jar will contain the classes produced by compiling the application and all of the application’s dependencies so that it can then be run using java -jar. The jar file will also contain entries from the application’s classpath. You can add explicit paths to the jar using --include and --exclude (both are comma-separated, and both accept prefixes to the values “+” and “-” to signify that they should be removed from the defaults). The default includes are

public/**, resources/**, static/**, templates/**, META-INF/**, *

and the default excludes are

.*, repository/**, build/**, target/**, **/*.jar, **/*.groovy

See the output of spring help jar for more information.

59.5 Initialize a new project

The init command allows you to create a new project using start.spring.io without leaving the shell. For example:

$ spring init --dependencies=web,data-jpa my-project
Using service at https://start.spring.io
Project extracted to '/Users/developer/example/my-project'

This creates a my-project directory with a Maven-based project using spring-boot-starter-web and spring-boot-starter-data-jpa. You can list the capabilities of the service using the --list flag

$ spring init --list
=======================================
Capabilities of https://start.spring.io
=======================================

Available dependencies:
-----------------------
actuator - Actuator: Production ready features to help you monitor and manage your application
...
web - Web: Support for full-stack web development, including Tomcat and spring-webmvc
websocket - Websocket: Support for WebSocket development
ws - WS: Support for Spring Web Services

Available project types:
------------------------
gradle-build -  Gradle Config [format:build, build:gradle]
gradle-project -  Gradle Project [format:project, build:gradle]
maven-build -  Maven POM [format:build, build:maven]
maven-project -  Maven Project [format:project, build:maven] (default)

...

The init command supports many options, check the help output for more details. For instance, the following command creates a gradle project using Java 8 and war packaging:

$ spring init --build=gradle --java-version=1.8 --dependencies=websocket --packaging=war sample-app.zip
Using service at https://start.spring.io
Content saved to 'sample-app.zip'

59.6 Using the embedded shell

Spring Boot includes command-line completion scripts for BASH and zsh shells. If you don’t use either of these shells (perhaps you are a Windows user) then you can use the shell command to launch an integrated shell.

$ spring shell
Spring Boot (v1.4.1.RELEASE)
Hit TAB to complete. Type \'help' and hit RETURN for help, and \'exit' to quit.

From inside the embedded shell you can run other commands directly:

$ version
Spring CLI v1.4.1.RELEASE

The embedded shell supports ANSI color output as well as tab completion. If you need to run a native command you can use the ! prefix. Hitting ctrl-c will exit the embedded shell.

59.7 Adding extensions to the CLI

You can add extensions to the CLI using the install command. The command takes one or more sets of artifact coordinates in the format group:artifact:version. For example:

$ spring install com.example:spring-boot-cli-extension:1.0.0.RELEASE

In addition to installing the artifacts identified by the coordinates you supply, all of the artifacts' dependencies will also be installed.

To uninstall a dependency use the uninstall command. As with the install command, it takes one or more sets of artifact coordinates in the format group:artifact:version. For example:

$ spring uninstall com.example:spring-boot-cli-extension:1.0.0.RELEASE

It will uninstall the artifacts identified by the coordinates you supply and their dependencies.

To uninstall all additional dependencies you can use the --all option. For example:

$ spring uninstall --all

60. Developing application with the Groovy beans DSL

Spring Framework 4.0 has native support for a beans{} “DSL” (borrowed from Grails), and you can embed bean definitions in your Groovy application scripts using the same format. This is sometimes a good way to include external features like middleware declarations. For example:

@Configuration
class Application implements CommandLineRunner {

    @Autowired
    SharedService service

    @Override
    void run(String... args) {
        println service.message
    }

}

import my.company.SharedService

beans {
    service(SharedService) {
        message = "Hello World"
    }
}

You can mix class declarations with beans{} in the same file as long as they stay at the top level, or you can put the beans DSL in a separate file if you prefer.

61. Configuring the CLI with settings.xml

The Spring Boot CLI uses Aether, Maven’s dependency resolution engine, to resolve dependencies. The CLI makes use of the Maven configuration found in ~/.m2/settings.xml to configure Aether. The following configuration settings are honored by the CLI:

  • Offline
  • Mirrors
  • Servers
  • Proxies
  • Profiles

    • Activation
    • Repositories
  • Active profiles

Please refer to Maven’s settings documentation for further information.

62. What to read next

There are some sample groovy scripts available from the GitHub repository that you can use to try out the Spring Boot CLI. There is also extensive Javadoc throughout the source code.

If you find that you reach the limit of the CLI tool, you will probably want to look at converting your application to full Gradle or Maven built “groovy project”. The next section covers Spring Boot’s Build tool plugins that you can use with Gradle or Maven.

Part VIII. Build tool plugins

Spring Boot provides build tool plugins for Maven and Gradle. The plugins offer a variety of features, including the packaging of executable jars. This section provides more details on both plugins, as well as some help should you need to extend an unsupported build system. If you are just getting started, you might want to read “Chapter 13, Build systems” from the Part III, “Using Spring Boot” section first.

63. Spring Boot Maven plugin

The Spring Boot Maven Plugin provides Spring Boot support in Maven, allowing you to package executable jar or war archives and run an application “in-place”. To use it you must be using Maven 3.2 (or better).

[Note]Note

Refer to the Spring Boot Maven Plugin Site for complete plugin documentation.

63.1 Including the plugin

To use the Spring Boot Maven Plugin simply include the appropriate XML in the plugins section of your pom.xml

<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
    <modelVersion>4.0.0</modelVersion>
    <!-- ... -->
    <build>
        <plugins>
            <plugin>
                <groupId>org.springframework.boot</groupId>
                <artifactId>spring-boot-maven-plugin</artifactId>
                <version>1.4.1.RELEASE</version>
                <executions>
                    <execution>
                        <goals>
                            <goal>repackage</goal>
                        </goals>
                    </execution>
                </executions>
            </plugin>
        </plugins>
    </build>
</project>

This configuration will repackage a jar or war that is built during the package phase of the Maven lifecycle. The following example shows both the repackaged jar, as well as the original jar, in the target directory:

$ mvn package
$ ls target/*.jar
target/myproject-1.0.0.jar target/myproject-1.0.0.jar.original

If you don’t include the <execution/> configuration as above, you can run the plugin on its own (but only if the package goal is used as well). For example:

$ mvn package spring-boot:repackage
$ ls target/*.jar
target/myproject-1.0.0.jar target/myproject-1.0.0.jar.original

If you are using a milestone or snapshot release you will also need to add appropriate pluginRepository elements:

<pluginRepositories>
    <pluginRepository>
        <id>spring-snapshots</id>
        <url>http://repo.spring.io/snapshot</url>
    </pluginRepository>
    <pluginRepository>
        <id>spring-milestones</id>
        <url>http://repo.spring.io/milestone</url>
    </pluginRepository>
</pluginRepositories>

63.2 Packaging executable jar and war files

Once spring-boot-maven-plugin has been included in your pom.xml it will automatically attempt to rewrite archives to make them executable using the spring-boot:repackage goal. You should configure your project to build a jar or war (as appropriate) using the usual packaging element:

<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
    <!-- ... -->
    <packaging>jar</packaging>
    <!-- ... -->
</project>

Your existing archive will be enhanced by Spring Boot during the package phase. The main class that you want to launch can either be specified using a configuration option, or by adding a Main-Class attribute to the manifest in the usual way. If you don’t specify a main class the plugin will search for a class with a public static void main(String[] args) method.

To build and run a project artifact, you can type the following:

$ mvn package
$ java -jar target/mymodule-0.0.1-SNAPSHOT.jar

To build a war file that is both executable and deployable into an external container you need to mark the embedded container dependencies as “provided”, e.g:

<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
    <!-- ... -->
    <packaging>war</packaging>
    <!-- ... -->
    <dependencies>
        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-web</artifactId>
        </dependency>
        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-tomcat</artifactId>
            <scope>provided</scope>
        </dependency>
        <!-- ... -->
    </dependencies>
</project>
[Tip]Tip

See the “Section 81.1, “Create a deployable war file”” section for more details on how to create a deployable war file.

Advanced configuration options and examples are available in the plugin info page.

64. Spring Boot Gradle plugin

The Spring Boot Gradle Plugin provides Spring Boot support in Gradle, allowing you to package executable jar or war archives, run Spring Boot applications and use the dependency management provided by spring-boot-dependencies.

64.1 Including the plugin

To use the Spring Boot Gradle Plugin simply include a buildscript dependency and apply the spring-boot plugin:

buildscript {
    dependencies {
        classpath("org.springframework.boot:spring-boot-gradle-plugin:1.4.1.RELEASE")
    }
}
apply plugin: 'spring-boot'

If you are using a milestone or snapshot release you will also need to add appropriate repositories reference:

buildscript {
    repositories {
        maven.url "http://repo.spring.io/snapshot"
        maven.url "http://repo.spring.io/milestone"
    }
    // ...
}

64.2 Gradle dependency management

The spring-boot plugin automatically applies the Dependency Management Plugin and configures in to import the spring-boot-starter-parent bom. This provides a similar dependency management experience to the one that is enjoyed by Maven users. For example, it allows you to omit version numbers when declaring dependencies that are managed in the bom. To make use of this functionality, simply declare dependencies in the usual way, but leave the version number empty:

dependencies {
    compile("org.springframework.boot:spring-boot-starter-web")
    compile("org.thymeleaf:thymeleaf-spring4")
    compile("nz.net.ultraq.thymeleaf:thymeleaf-layout-dialect")
}
[Note]Note

The version of the spring-boot gradle plugin that you declare determines the version of the spring-boot-starter-parent bom that is imported (this ensures that builds are always repeatable). You should always set the version of the spring-boot gradle plugin to the actual Spring Boot version that you wish to use. Details of the versions that are provided can be found in the appendix.

The dependency management plugin will only supply a version where one is not specified. To use a version of an artifact that differs from the one that the plugin would provide, simply specify the version when you declare the dependency as you usually would. For example:

dependencies {
    compile("org.thymeleaf:thymeleaf-spring4:2.1.1.RELEASE")
}

To learn more about the capabilities of the Dependency Management Plugin, please refer to its documentation.

64.3 Packaging executable jar and war files

Once the spring-boot plugin has been applied to your project it will automatically attempt to rewrite archives to make them executable using the bootRepackage task. You should configure your project to build a jar or war (as appropriate) in the usual way.

The main class that you want to launch can either be specified using a configuration option, or by adding a Main-Class attribute to the manifest. If you don’t specify a main class the plugin will search for a class with a public static void main(String[] args) method.

[Tip]Tip

Check Section 64.6, “Repackage configuration” for a full list of configuration options.

To build and run a project artifact, you can type the following:

$ gradle build
$ java -jar build/libs/mymodule-0.0.1-SNAPSHOT.jar

To build a war file that is both executable and deployable into an external container, you need to mark the embedded container dependencies as belonging to the war plugin’s providedRuntime configuration, e.g.:

...
apply plugin: 'war'

war {
    baseName = 'myapp'
    version =  '0.5.0'
}

repositories {
    jcenter()
    maven { url "http://repo.spring.io/libs-snapshot" }
}

dependencies {
    compile("org.springframework.boot:spring-boot-starter-web")
    providedRuntime("org.springframework.boot:spring-boot-starter-tomcat")
    ...
}
[Tip]Tip

See the “Section 81.1, “Create a deployable war file”” section for more details on how to create a deployable war file.

64.4 Running a project in-place

To run a project in place without building a jar first you can use the “bootRun” task:

$ gradle bootRun

If devtools has been added to your project it will automatically monitor your application for changes. Alternatively, you can also run the application so that your static classpath resources (i.e. in src/main/resources by default) are reloadable in the live application, which can be helpful at development time.

bootRun {
    addResources = true
}

Making static classpath resources reloadable means that bootRun does not use the output of the processResources task, i.e., when invoked using bootRun, your application will use the resources in their unprocessed form.

64.5 Spring Boot plugin configuration

The gradle plugin automatically extends your build script DSL with a springBoot element for global configuration of the Boot plugin. Set the appropriate properties as you would with any other Gradle extension (see below for a list of configuration options):

springBoot {
    backupSource = false
}

64.6 Repackage configuration

The plugin adds a bootRepackage task which you can also configure directly, e.g.:

bootRepackage {
    mainClass = 'demo.Application'
}

The following configuration options are available:

NameDescription

enabled

Boolean flag to switch the repackager off (sometimes useful if you want the other Boot features but not this one)

mainClass

The main class that should be run. If not specified, and you have applied the application plugin, the mainClassName project property will be used. If the application plugin has not been applied or no mainClassName has been specified, the archive will be searched for a suitable class. "Suitable" means a unique class with a well-formed main() method (if more than one is found the build will fail). If you have applied the application plugin, the main class can also be specified via its "run" task (main property) and/or its "startScripts" task (mainClassName property) as an alternative to using the "springBoot" configuration.

classifier

A file name segment (before the extension) to add to the archive, so that the original is preserved in its original location. Defaults to null in which case the archive is repackaged in place. The default is convenient for many purposes, but if you want to use the original jar as a dependency in another project you must use a classifier to define the executable archive.

withJarTask

The name or value of the Jar task (defaults to all tasks of type Jar) which is used to locate the archive to repackage.

customConfiguration

The name of the custom configuration which is used to populate the nested lib directory (without specifying this you get all compile and runtime dependencies).

executable

Boolean flag to indicate if jar files are fully executable on Unix like operating systems. Defaults to false.

embeddedLaunchScript

The embedded launch script to prepend to the front of the jar if it is fully executable. If not specified the 'Spring Boot' default script will be used.

embeddedLaunchScriptProperties

Additional properties that to be expanded in the launch script. The default script supports a mode property which can contain the values auto, service or run.

excludeDevtools

Boolean flag to indicate if the devtools jar should be excluded from the repackaged archives. Defaults to false.

64.7 Repackage with custom Gradle configuration

Sometimes it may be more appropriate to not package default dependencies resolved from compile, runtime and provided scopes. If the created executable jar file is intended to be run as it is, you need to have all dependencies nested inside it; however, if the plan is to explode a jar file and run the main class manually, you may already have some of the libraries available via CLASSPATH. This is a situation where you can repackage your jar with a different set of dependencies.

Using a custom configuration will automatically disable dependency resolving from compile, runtime and provided scopes. Custom configuration can be either defined globally (inside the springBoot section) or per task.

task clientJar(type: Jar) {
    appendix = 'client'
    from sourceSets.main.output
    exclude('**/*Something*')
}

task clientBoot(type: BootRepackage, dependsOn: clientJar) {
    withJarTask = clientJar
    customConfiguration = "mycustomconfiguration"
}

In above example, we created a new clientJar Jar task to package a customized file set from your compiled sources. Then we created a new clientBoot BootRepackage task and instructed it to work with only clientJar task and mycustomconfiguration.

configurations {
    mycustomconfiguration.exclude group: 'log4j'
}

dependencies {
    mycustomconfiguration configurations.runtime
}

The configuration that we are referring to in BootRepackage is a normal Gradle configuration. In the above example we created a new configuration named mycustomconfiguration instructing it to derive from a runtime and exclude the log4j group. If the clientBoot task is executed, the repackaged boot jar will have all dependencies from runtime but no log4j jars.

64.7.1 Configuration options

The following configuration options are available:

NameDescription

mainClass

The main class that should be run by the executable archive.

providedConfiguration

The name of the provided configuration (defaults to providedRuntime).

backupSource

If the original source archive should be backed-up before being repackaged (defaults to true).

customConfiguration

The name of the custom configuration.

layout

The type of archive, corresponding to how the dependencies are laid out inside (defaults to a guess based on the archive type). See available layouts for more details.

requiresUnpack

A list of dependencies (in the form “groupId:artifactId” that must be unpacked from fat jars in order to run. Items are still packaged into the fat jar, but they will be automatically unpacked when it runs.

64.7.2 Available layouts

The layout attribute configures the format of the archive and whether the bootstrap loader should be included or not. The following layouts are available:

NameDescriptionExecutable

JAR

Regular executable JAR layout.

Yes

WAR

Executable WAR layout. provided dependencies are placed in WEB-INF/lib-provided to avoid any clash when the war is deployed in a servlet container.

Yes

ZIP (alias to DIR)

Similar to JAR layout, using PropertiesLauncher.

Yes

MODULE

Bundle dependencies (excluding those with provided scope) and project resources.

No

NONE

Bundle all dependencies and project resources.

No

64.8 Understanding how the Gradle plugin works

When spring-boot is applied to your Gradle project a default task named bootRepackage is created automatically. The bootRepackage task depends on Gradle assemble task, and when executed, it tries to find all jar artifacts whose qualifier is empty (i.e. tests and sources jars are automatically skipped).

Due to the fact that bootRepackage finds 'all' created jar artifacts, the order of Gradle task execution is important. Most projects only create a single jar file, so usually this is not an issue; however, if you are planning to create a more complex project setup, with custom Jar and BootRepackage tasks, there are few tweaks to consider.

If you are 'just' creating custom jar files from your project you can simply disable default jar and bootRepackage tasks:

jar.enabled = false
bootRepackage.enabled = false

Another option is to instruct the default bootRepackage task to only work with a default jar task.

bootRepackage.withJarTask = jar

If you have a default project setup where the main jar file is created and repackaged, 'and' you still want to create additional custom jars, you can combine your custom repackage tasks together and use dependsOn so that the bootJars task will run after the default bootRepackage task is executed:

task bootJars
bootJars.dependsOn = [clientBoot1,clientBoot2,clientBoot3]
build.dependsOn(bootJars)

All the above tweaks are usually used to avoid situations where an already created boot jar is repackaged again. Repackaging an existing boot jar will not break anything, but you may find that it includes unnecessary dependencies.

64.9 Publishing artifacts to a Maven repository using Gradle

If you are declaring dependencies without versions and you want to publish artifacts to a Maven repository you will need to configure the Maven publication with details of Spring Boot’s dependency management. This can be achieved by configuring it to publish poms that inherit from spring-boot-starter-parent or that import dependency management from spring-boot-dependencies. The exact details of this configuration depend on how you’re using Gradle and how you’re trying to publish the artifacts.

64.9.1 Configuring Gradle to produce a pom that inherits dependency management

The following is an example of configuring Gradle to generate a pom that inherits from spring-boot-starter-parent. Please refer to the Gradle User Guide for further information.

uploadArchives {
    repositories {
        mavenDeployer {
            pom {
                project {
                    parent {
                        groupId "org.springframework.boot"
                        artifactId "spring-boot-starter-parent"
                        version "1.4.1.RELEASE"
                    }
                }
            }
        }
    }
}

64.9.2 Configuring Gradle to produce a pom that imports dependency management

The following is an example of configuring Gradle to generate a pom that imports the dependency management provided by spring-boot-dependencies. Please refer to the Gradle User Guide for further information.

uploadArchives {
    repositories {
        mavenDeployer {
            pom {
                project {
                    dependencyManagement {
                        dependencies {
                            dependency {
                                groupId "org.springframework.boot"
                                artifactId "spring-boot-dependencies"
                                version "1.4.1.RELEASE"
                                type "pom"
                                scope "import"
                            }
                        }
                    }
                }
            }
        }
    }
}

65. Spring Boot AntLib module

The Spring Boot AntLib module provides basic Spring Boot support for Apache Ant. You can use the module to create executable jars. To use the module you need to declare an additional spring-boot namespace in your build.xml:

<project xmlns:ivy="antlib:org.apache.ivy.ant"
    xmlns:spring-boot="antlib:org.springframework.boot.ant"
    name="myapp" default="build">
    ...
</project>

You’ll need to remember to start Ant using the -lib option, for example:

$ ant -lib <folder containing spring-boot-antlib-1.4.1.RELEASE.jar>
[Tip]Tip

The “Using Spring Boot” section includes a more complete example of using Apache Ant with spring-boot-antlib

65.1 Spring Boot Ant tasks

Once the spring-boot-antlib namespace has been declared, the following additional tasks are available.

65.1.1 spring-boot:exejar

The exejar task can be used to creates a Spring Boot executable jar. The following attributes are supported by the task:

AttributeDescriptionRequired

destfile

The destination jar file to create

Yes

classes

The root directory of Java class files

Yes

start-class

The main application class to run

No (default is first class found declaring a main method)

The following nested elements can be used with the task:

ElementDescription

resources

One or more Resource Collections describing a set of Resources that should be added to the content of the created jar file.

lib

One or more Resource Collections that should be added to the set of jar libraries that make up the runtime dependency classpath of the application.

65.1.2 Examples

Specify start-class. 

<spring-boot:exejar destfile="target/my-application.jar"
        classes="target/classes" start-class="com.foo.MyApplication">
    <resources>
        <fileset dir="src/main/resources" />
    </resources>
    <lib>
        <fileset dir="lib" />
    </lib>
</spring-boot:exejar>

Detect start-class. 

<exejar destfile="target/my-application.jar" classes="target/classes">
    <lib>
        <fileset dir="lib" />
    </lib>
</exejar>

65.2 spring-boot:findmainclass

The findmainclass task is used internally by exejar to locate a class declaring a main. You can also use this task directly in your build if needed. The following attributes are supported

AttributeDescriptionRequired

classesroot

The root directory of Java class files

Yes (unless mainclass is specified)

mainclass

Can be used to short-circuit the main class search

No

property

The Ant property that should be set with the result

No (result will be logged if unspecified)

65.2.1 Examples

Find and log. 

<findmainclass classesroot="target/classes" />

Find and set. 

<findmainclass classesroot="target/classes" property="main-class" />

Override and set. 

<findmainclass mainclass="com.foo.MainClass" property="main-class" />

66. Supporting other build systems

If you want to use a build tool other than Maven, Gradle or Ant, you will likely need to develop your own plugin. Executable jars need to follow a specific format and certain entries need to be written in an uncompressed form (see the executable jar format section in the appendix for details).

The Spring Boot Maven and Gradle plugins both make use of spring-boot-loader-tools to actually generate jars. You are also free to use this library directly yourself if you need to.

66.1 Repackaging archives

To repackage an existing archive so that it becomes a self-contained executable archive use org.springframework.boot.loader.tools.Repackager. The Repackager class takes a single constructor argument that refers to an existing jar or war archive. Use one of the two available repackage() methods to either replace the original file or write to a new destination. Various settings can also be configured on the repackager before it is run.

66.2 Nested libraries

When repackaging an archive you can include references to dependency files using the org.springframework.boot.loader.tools.Libraries interface. We don’t provide any concrete implementations of Libraries here as they are usually build system specific.

If your archive already includes libraries you can use Libraries.NONE.

66.3 Finding a main class

If you don’t use Repackager.setMainClass() to specify a main class, the repackager will use ASM to read class files and attempt to find a suitable class with a public static void main(String[] args) method. An exception is thrown if more than one candidate is found.

66.4 Example repackage implementation

Here is a typical example repackage:

Repackager repackager = new Repackager(sourceJarFile);
repackager.setBackupSource(false);
repackager.repackage(new Libraries() {
            @Override
            public void doWithLibraries(LibraryCallback callback) throws IOException {
                // Build system specific implementation, callback for each dependency
                // callback.library(new Library(nestedFile, LibraryScope.COMPILE));
            }
        });

67. What to read next

If you’re interested in how the build tool plugins work you can look at the spring-boot-tools module on GitHub. More technical details of the executable jar format are covered in the appendix.

If you have specific build-related questions you can check out the “how-to” guides.

Part IX. ‘How-to’ guides

This section provides answers to some common ‘how do I do that…​’ type of questions that often arise when using Spring Boot. This is by no means an exhaustive list, but it does cover quite a lot.

If you are having a specific problem that we don’t cover here, you might want to check out stackoverflow.com to see if someone has already provided an answer; this is also a great place to ask new questions (please use the spring-boot tag).

We’re also more than happy to extend this section; If you want to add a ‘how-to’ you can send us a pull request.

68. Spring Boot application

68.1 Create your own FailureAnalyzer

[FailureAnalyzer is a great way to intercept an exception on startup and turn it into a human-readable message, wrapped into a [FailureAnalysis. Spring Boot provides such analyzer for application context related exceptions, JSR-303 validations and more. It is actually very easy to create your own.

AbstractFailureAnalyzer is a convenient extension of FailureAnalyzer that checks the presence of a specified exception type in the exception to handle. You can extend from that so that your implementation gets a chance to handle the exception only when it is actually present. If for whatever reason you can’t handle the exception, return null to let another implementation a chance to handle the exception.

FailureAnalyzer implementations are to be registered in a META-INF/spring.factories: the following registers ProjectConstraintViolationFailureAnalyzer:

org.springframework.boot.diagnostics.FailureAnalyzer=\
com.example.ProjectConstraintViolationFailureAnalyzer

68.2 Troubleshoot auto-configuration

The Spring Boot auto-configuration tries its best to ‘do the right thing’, but sometimes things fail and it can be hard to tell why.

There is a really useful ConditionEvaluationReport available in any Spring Boot ApplicationContext. You will see it if you enable DEBUG logging output. If you use the spring-boot-actuator there is also an autoconfig endpoint that renders the report in JSON. Use that to debug the application and see what features have been added (and which not) by Spring Boot at runtime.

Many more questions can be answered by looking at the source code and the Javadoc. Some rules of thumb:

  • Look for classes called *AutoConfiguration and read their sources, in particular the @Conditional* annotations to find out what features they enable and when. Add --debug to the command line or a System property -Ddebug to get a log on the console of all the auto-configuration decisions that were made in your app. In a running Actuator app look at the autoconfig endpoint (‘/autoconfig’ or the JMX equivalent) for the same information.
  • Look for classes that are @ConfigurationProperties (e.g. ServerProperties) and read from there the available external configuration options. The @ConfigurationProperties has a name attribute which acts as a prefix to external properties, thus ServerProperties has prefix="server" and its configuration properties are server.port, server.address etc. In a running Actuator app look at the configprops endpoint.
  • Look for use of RelaxedPropertyResolver to pull configuration values explicitly out of the Environment. It often is used with a prefix.
  • Look for @Value annotations that bind directly to the Environment. This is less flexible than the RelaxedPropertyResolver approach, but does allow some relaxed binding, specifically for OS environment variables (so CAPITALS_AND_UNDERSCORES are synonyms for period.separated).
  • Look for @ConditionalOnExpression annotations that switch features on and off in response to SpEL expressions, normally evaluated with placeholders resolved from the Environment.

68.3 Customize the Environment or ApplicationContext before it starts

A SpringApplication has ApplicationListeners and ApplicationContextInitializers that are used to apply customizations to the context or environment. Spring Boot loads a number of such customizations for use internally from META-INF/spring.factories. There is more than one way to register additional ones:

  • Programmatically per application by calling the addListeners and addInitializers methods on SpringApplication before you run it.
  • Declaratively per application by setting context.initializer.classes or context.listener.classes.
  • Declaratively for all applications by adding a META-INF/spring.factories and packaging a jar file that the applications all use as a library.

The SpringApplication sends some special ApplicationEvents to the listeners (even some before the context is created), and then registers the listeners for events published by the ApplicationContext as well. See Section 23.5, “Application events and listeners” in the ‘Spring Boot features’ section for a complete list.

It is also possible to customize the Environment before the application context is refreshed using EnvironmentPostProcessor. Each implementation should be registered in META-INF/spring.factories:

org.springframework.boot.env.EnvironmentPostProcessor=com.example.YourEnvironmentPostProcessor

68.4 Build an ApplicationContext hierarchy (adding a parent or root context)

You can use the ApplicationBuilder class to create parent/child ApplicationContext hierarchies. See Section 23.4, “Fluent builder API” in the ‘Spring Boot features’ section for more information.

68.5 Create a non-web application

Not all Spring applications have to be web applications (or web services). If you want to execute some code in a main method, but also bootstrap a Spring application to set up the infrastructure to use, then it’s easy with the SpringApplication features of Spring Boot. A SpringApplication changes its ApplicationContext class depending on whether it thinks it needs a web application or not. The first thing you can do to help it is to just leave the servlet API dependencies off the classpath. If you can’t do that (e.g. you are running 2 applications from the same code base) then you can explicitly call setWebEnvironment(false) on your SpringApplication instance, or set the applicationContextClass property (through the Java API or with external properties). Application code that you want to run as your business logic can be implemented as a CommandLineRunner and dropped into the context as a @Bean definition.

69. Properties & configuration

69.1 Automatically expand properties at build time

Rather than hardcoding some properties that are also specified in your project’s build configuration, you can automatically expand them using the existing build configuration instead. This is possible in both Maven and Gradle.

69.1.1 Automatic property expansion using Maven

You can automatically expand properties from the Maven project using resource filtering. If you use the spring-boot-starter-parent you can then refer to your Maven ‘project properties’ via @..@ placeholders, e.g.

app.encoding[email protected]@
app.java.version[email protected]@
[Tip]Tip

The spring-boot:run can add src/main/resources directly to the classpath (for hot reloading purposes) if you enable the addResources flag. This circumvents the resource filtering and this feature. You can use the exec:java goal instead or customize the plugin’s configuration, see the plugin usage page for more details.

If you don’t use the starter parent, in your pom.xml you need (inside the <build/> element):

<resources>
    <resource>
        <directory>src/main/resources</directory>
        <filtering>true</filtering>
    </resource>
</resources>

and (inside <plugins/>):

<plugin>
    <groupId>org.apache.maven.plugins</groupId>
    <artifactId>maven-resources-plugin</artifactId>
    <version>2.7</version>
    <configuration>
        <delimiters>
            <delimiter>@</delimiter>
        </delimiters>
        <useDefaultDelimiters>false</useDefaultDelimiters>
    </configuration>
</plugin>
[Note]Note

The useDefaultDelimiters property is important if you are using standard Spring placeholders in your configuration (e.g. ${foo}). These may be expanded by the build if that property is not set to false.

69.1.2 Automatic property expansion using Gradle

You can automatically expand properties from the Gradle project by configuring the Java plugin’s processResources task to do so:

processResources {
    expand(project.properties)
}

You can then refer to your Gradle project’s properties via placeholders, e.g.

app.name=${name}
app.description=${description}
[Note]Note

Gradle’s expand method uses Groovy’s SimpleTemplateEngine which transforms ${..} tokens. The ${..} style conflicts with Spring’s own property placeholder mechanism. To use Spring property placeholders together with automatic expansion the Spring property placeholders need to be escaped like \${..}.

69.2 Externalize the configuration of SpringApplication

A SpringApplication has bean properties (mainly setters) so you can use its Java API as you create the application to modify its behavior. Or you can externalize the configuration using properties in spring.main.*. E.g. in application.properties you might have.

spring.main.web-environment=false
spring.main.banner-mode=off

and then the Spring Boot banner will not be printed on startup, and the application will not be a web application.

[Note]Note

The example above also demonstrates how flexible binding allows the use of underscores (_) as well as dashes (-) in property names.

Properties defined in external configuration overrides the values specified via the Java API with the notable exception of the sources used to create the ApplicationContext. Let’s consider this application

new SpringApplicationBuilder()
    .bannerMode(Banner.Mode.OFF)
    .sources(demo.MyApp.class)
    .run(args);

used with the following configuration:

spring.main.sources=com.acme.Config,com.acme.ExtraConfig
spring.main.banner-mode=console

The actual application will now show the banner (as overridden by configuration) and use three sources for the ApplicationContext (in that order): demo.MyApp, com.acme.Config, com.acme.ExtraConfig.

69.3 Change the location of external properties of an application

By default properties from different sources are added to the Spring Environment in a defined order (see Chapter 24, Externalized Configuration in the ‘Spring Boot features’ section for the exact order).

A nice way to augment and modify this is to add @PropertySource annotations to your application sources. Classes passed to the SpringApplication static convenience methods, and those added using setSources() are inspected to see if they have @PropertySources, and if they do, those properties are added to the Environment early enough to be used in all phases of the ApplicationContext lifecycle. Properties added in this way have lower priority than any added using the default locations (e.g. application.properties), system properties, environment variables or the command line.

You can also provide System properties (or environment variables) to change the behavior:

  • spring.config.name (SPRING_CONFIG_NAME), defaults to application as the root of the file name.
  • spring.config.location (SPRING_CONFIG_LOCATION) is the file to load (e.g. a classpath resource or a URL). A separate Environment property source is set up for this document and it can be overridden by system properties, environment variables or the command line.

No matter what you set in the environment, Spring Boot will always load application.properties as described above. If YAML is used then files with the ‘.yml’ extension are also added to the list by default.

Spring Boot logs the configuration files that are loaded at DEBUG level and the candidates it has not found at TRACE level.

See ConfigFileApplicationListener for more detail.

69.4 Use ‘short’ command line arguments

Some people like to use (for example) --port=9000 instead of --server.port=9000 to set configuration properties on the command line. You can easily enable this by using placeholders in application.properties, e.g.

server.port=${port:8080}
[Tip]Tip

If you are inheriting from the spring-boot-starter-parent POM, the default filter token of the maven-resources-plugins has been changed from ${*} to @ (i.e. @maven.token@ instead of ${maven.token}) to prevent conflicts with Spring-style placeholders. If you have enabled maven filtering for the application.properties directly, you may want to also change the default filter token to use other delimiters.

[Note]Note

In this specific case the port binding will work in a PaaS environment like Heroku and Cloud Foundry, since in those two platforms the PORT environment variable is set automatically and Spring can bind to capitalized synonyms for Environment properties.

69.5 Use YAML for external properties

YAML is a superset of JSON and as such is a very convenient syntax for storing external properties in a hierarchical format. E.g.

spring:
    application:
        name: cruncher
    datasource:
        driverClassName: com.mysql.jdbc.Driver
        url: jdbc:mysql://localhost/test
server:
    port: 9000

Create a file called application.yml and stick it in the root of your classpath, and also add snakeyaml to your dependencies (Maven coordinates org.yaml:snakeyaml, already included if you use the spring-boot-starter). A YAML file is parsed to a Java Map<String,Object> (like a JSON object), and Spring Boot flattens the map so that it is 1-level deep and has period-separated keys, a lot like people are used to with Properties files in Java.

The example YAML above corresponds to an application.properties file

spring.application.name=cruncher
spring.datasource.driverClassName=com.mysql.jdbc.Driver
spring.datasource.url=jdbc:mysql://localhost/test
server.port=9000

See Section 24.6, “Using YAML instead of Properties” in the ‘Spring Boot features’ section for more information about YAML.

69.6 Set the active Spring profiles

The Spring Environment has an API for this, but normally you would set a System property (spring.profiles.active) or an OS environment variable (SPRING_PROFILES_ACTIVE). E.g. launch your application with a -D argument (remember to put it before the main class or jar archive):

$ java -jar -Dspring.profiles.active=production demo-0.0.1-SNAPSHOT.jar

In Spring Boot you can also set the active profile in application.properties, e.g.

spring.profiles.active=production

A value set this way is replaced by the System property or environment variable setting, but not by the SpringApplicationBuilder.profiles() method. Thus the latter Java API can be used to augment the profiles without changing the defaults.

See Chapter 25, Profiles in the ‘Spring Boot features’ section for more information.

69.7 Change configuration depending on the environment

A YAML file is actually a sequence of documents separated by --- lines, and each document is parsed separately to a flattened map.

If a YAML document contains a spring.profiles key, then the profiles value (comma-separated list of profiles) is fed into the Spring Environment.acceptsProfiles() and if any of those profiles is active that document is included in the final merge (otherwise not).

Example:

server:
    port: 9000
---

spring:
    profiles: development
server:
    port: 9001

---

spring:
    profiles: production
server:
    port: 0

In this example the default port is 9000, but if the Spring profile ‘development’ is active then the port is 9001, and if ‘production’ is active then it is 0.

The YAML documents are merged in the order they are encountered (so later values override earlier ones).

To do the same thing with properties files you can use application-${profile}.properties to specify profile-specific values.

69.8 Discover built-in options for external properties

Spring Boot binds external properties from application.properties (or .yml) (and other places) into an application at runtime. There is not (and technically cannot be) an exhaustive list of all supported properties in a single location because contributions can come from additional jar files on your classpath.

A running application with the Actuator features has a configprops endpoint that shows all the bound and bindable properties available through @ConfigurationProperties.

The appendix includes an application.properties example with a list of the most common properties supported by Spring Boot. The definitive list comes from searching the source code for @ConfigurationProperties and @Value annotations, as well as the occasional use of RelaxedPropertyResolver.

70. Embedded servlet containers

70.1 Add a Servlet, Filter or Listener to an application

There are two ways to add Servlet, Filter, ServletContextListener and the other listeners supported by the Servlet spec to your application. You can either provide Spring beans for them, or enable scanning for Servlet components.

70.1.1 Add a Servlet, Filter or Listener using a Spring bean

To add a Servlet, Filter, or Servlet *Listener provide a @Bean definition for it. This can be very useful when you want to inject configuration or dependencies. However, you must be very careful that they don’t cause eager initialization of too many other beans because they have to be installed in the container very early in the application lifecycle (e.g. it’s not a good idea to have them depend on your DataSource or JPA configuration). You can work around restrictions like that by initializing them lazily when first used instead of on initialization.

In the case of Filters and Servlets you can also add mappings and init parameters by adding a FilterRegistrationBean or ServletRegistrationBean instead of or as well as the underlying component.

[Note]Note

If no dispatcherType is specified on a filter registration, it will match FORWARD,INCLUDE and REQUEST. If async has been enabled, it will match ASYNC as well.

If you are migrating a filter that has no dispatcher element in web.xml you will need to specify a dispatcherType yourself:

@Bean
public FilterRegistrationBean myFilterRegistration() {
    FilterRegistrationBean registration = new FilterRegistrationBean();
    registration.setDispatcherTypes(DispatcherType.REQUEST);
    ....

    return registration;
}

Disable registration of a Servlet or Filter

As described above any Servlet or Filter beans will be registered with the servlet container automatically. To disable registration of a particular Filter or Servlet bean create a registration bean for it and mark it as disabled. For example:

@Bean
public FilterRegistrationBean registration(MyFilter filter) {
    FilterRegistrationBean registration = new FilterRegistrationBean(filter);
    registration.setEnabled(false);
    return registration;
}

70.1.2 Add Servlets, Filters, and Listeners using classpath scanning

@WebServlet, @WebFilter, and @WebListener annotated classes can be automatically registered with an embedded servlet container by annotating a @Configuration class with @ServletComponentScan and specifying the package(s) containing the components that you want to register. By default, @ServletComponentScan will scan from the package of the annotated class.

70.2 Change the HTTP port

In a standalone application the main HTTP port defaults to 8080, but can be set with server.port (e.g. in application.properties or as a System property). Thanks to relaxed binding of Environment values you can also use SERVER_PORT (e.g. as an OS environment variable).

To switch off the HTTP endpoints completely, but still create a WebApplicationContext, use server.port=-1 (this is sometimes useful for testing).

For more details look at Section 27.3.4, “Customizing embedded servlet containers” in the ‘Spring Boot features’ section, or the ServerProperties source code.

70.3 Use a random unassigned HTTP port

To scan for a free port (using OS natives to prevent clashes) use server.port=0.

70.4 Discover the HTTP port at runtime

You can access the port the server is running on from log output or from the EmbeddedWebApplicationContext via its EmbeddedServletContainer. The best way to get that and be sure that it has initialized is to add a @Bean of type ApplicationListener<EmbeddedServletContainerInitializedEvent> and pull the container out of the event when it is published.

Tests that use @SpringBootTest(webEnvironment=WebEnvironment.RANDOM_PORT) can also inject the actual port into a field using the @LocalServerPort annotation. For example:

@RunWith(SpringJUnit4ClassRunner.class)
@SpringBootTest(webEnvironment=WebEnvironment.RANDOM_PORT)
public class MyWebIntegrationTests {

    @Autowired
    EmbeddedWebApplicationContext server;

    @LocalServerPort
    int port;

    // ...

}
[Note]Note

@LocalServerPort is a meta-annotation for @Value("${local.server.port}"). Don’t try to inject the port in a regular application. As we just saw, the value is only set once the container has initialized; contrary to a test, application code callbacks are processed early (i.e. before the value is actually available).

70.5 Configure SSL

SSL can be configured declaratively by setting the various server.ssl.* properties, typically in application.properties or application.yml. For example:

server.port=8443
server.ssl.key-store=classpath:keystore.jks
server.ssl.key-store-password=secret
server.ssl.key-password=another-secret

See Ssl for details of all of the supported properties.

Using configuration like the example above means the application will no longer support plain HTTP connector at port 8080. Spring Boot doesn’t support the configuration of both an HTTP connector and an HTTPS connector via application.properties. If you want to have both then you’ll need to configure one of them programmatically. It’s recommended to use application.properties to configure HTTPS as the HTTP connector is the easier of the two to configure programmatically. See the spring-boot-sample-tomcat-multi-connectors sample project for an example.

70.6 Configure Access Logging

Access logs can be configured for Tomcat and Undertow via their respective namespaces.

For instance, the following logs access on Tomcat with a custom pattern.

server.tomcat.basedir=my-tomcat
server.tomcat.accesslog.enabled=true
server.tomcat.accesslog.pattern=%t %a "%r" %s (%D ms)
[Note]Note

The default location for logs is a logs directory relative to the tomcat base dir and said directory is a temp directory by default so you may want to fix Tomcat’s base directory or use an absolute path for the logs. In the example above, the logs will be available in my-tomcat/logs relative to the working directory of the application.

Access logging for undertow can be configured in a similar fashion

server.undertow.accesslog.enabled=true
server.undertow.accesslog.pattern=%t %a "%r" %s (%D ms)

Logs are stored in a logs directory relative to the working directory of the application. This can be customized via server.undertow.accesslog.directory.

70.7 Use behind a front-end proxy server

Your application might need to send 302 redirects or render content with absolute links back to itself. When running behind