56. Installing Spring Boot applications

In additional to running Spring Boot applications using java -jar it is also possible to make fully executable applications for Unix systems. This makes it very easy to install and manage Spring Boot applications in common production environments.

To create a ‘fully executable’ jar with Maven use the following plugin configuration:


With Gradle, the equivalent configuration would be:

springBoot {
    executable = true

You can then run your application by typing ./my-application.jar (where my-application is the name of your artifact).


Fully executable jars work by embedding an extra script at the front of the file. Not all tools currently accept this format so you may not always be able to use this technique.


The default script supports most Linux distributions and is tested on CentOS and Ubuntu. Other platforms, such as OS X and FreeBSD, will require the use of a custom embeddedLaunchScript.


When a fully executable jar is run, it uses the jar’s directory as the working directory.

56.1 Unix/Linux services

Spring Boot application can be easily started as Unix/Linux services using either init.d or systemd.

56.1.1 Installation as an init.d service (System V)

If you’ve configured Spring Boot’s Maven or Gradle plugin to generate a fully executable jar, and you’re not using a custom embeddedLaunchScript, then your application can be used as an init.d service. Simply symlink the jar to init.d to support the standard start, stop, restart and status commands.

The script supports the following features:

  • Starts the services as the user that owns the jar file
  • Tracks application’s PID using /var/run/<appname>/<appname>.pid
  • Writes console logs to /var/log/<appname>.log

Assuming that you have a Spring Boot application installed in /var/myapp, to install a Spring Boot application as an init.d service simply create a symlink:

$ sudo ln -s /var/myapp/myapp.jar /etc/init.d/myapp

Once installed, you can start and stop the service in the usual way. For example, on a Debian based system:

$ service myapp start

If your application fails to start, check the log file written to /var/log/<appname>.log for errors.

You can also flag the application to start automatically using your standard operating system tools. For example, on Debian:

$ update-rc.d myapp defaults <priority>

Securing an init.d service


The following is a set of guidelines on how to secure a Spring Boot application that’s being run as an init.d service. It is not intended to be an exhaustive list of everything that should be done to harden an application and the environment in which it runs.

When executed as root, as is the case when root is being used to start an init.d service, the default executable script will run the application as the user which owns the jar file. You should never run a Spring Boot application as root so your application’s jar file should never be owned by root. Instead, create a specific user to run your application and use chown to make it the owner of the jar file. For example:

$ chown bootapp:bootapp your-app.jar

In this case, the default executable script will run the application as the bootapp user.


To reduce the chances of the application’s user account being compromised, you should consider preventing it from using a login shell. Set the account’s shell to /usr/sbin/nologin, for example.

You should also take steps to prevent the modification of your application’s jar file. Firstly, configure its permissions so that it cannot be written and can only be read or executed by its owner:

$ chmod 500 your-app.jar

Secondly, you should also take steps to limit the damage if your application or the account that’s running it is compromised. If an attacker does gain access, they could make the jar file writable and change its contents. One way to protect against this is to make it immutable using chattr:

$ sudo chattr +i your-app.jar

This will prevent any user, including root, from modifying the jar.

If root is used to control the application’s service and you use a .conf file to customize its startup, the .conf file will be read and evaluated by the root user. It should be secured accordingly. Use chmod so that the file can only be read by the owner and use chown to make root the owner:

$ chmod 400 your-app.conf
$ sudo chown root:root your-app.conf

56.1.2 Installation as a systemd service

Systemd is the successor of the System V init system, and is now being used by many modern Linux distributions. Although you can continue to use init.d scripts with systemd, it is also possible to launch Spring Boot applications using systemd ‘service’ scripts.

Assuming that you have a Spring Boot application installed in /var/myapp, to install a Spring Boot application as a systemd service create a script named myapp.service using the following example and place it in /etc/systemd/system directory:




Remember to change the Description, User and ExecStart fields for your application.


Note that ExecStart field does not declare the script action command, which means that run command is used by default.

Note that unlike when running as an init.d service, user that runs the application, PID file and console log file are managed by systemd itself and therefore must be configured using appropriate fields in ‘service’ script. Consult the service unit configuration man page for more details.

To flag the application to start automatically on system boot use the following command:

$ systemctl enable myapp.service

Refer to man systemctl for more details.

56.1.3 Customizing the startup script

The default embedded startup script written by the Maven or Gradle plugin can be customized in a number of ways. For most people, using the default script along with a few customizations is usually enough. If you find you can’t customize something that you need to, you can always use the embeddedLaunchScript option to write your own file entirely.

Customizing script when it’s written

It often makes sense to customize elements of the start script as it’s written into the jar file. For example, init.d scripts can provide a “description” and, since you know this up front (and it won’t change), you may as well provide it when the jar is generated.

To customize written elements, use the embeddedLaunchScriptProperties option of the Spring Boot Maven or Gradle plugins.

The following property substitutions are supported with the default script:



The script mode. Defaults to auto.


The Provides section of “INIT INFO”. Defaults to spring-boot-application for Gradle and to ${project.artifactId} for Maven.


The Short-Description section of “INIT INFO”. Defaults to Spring Boot Application for Gradle and to ${project.name} for Maven.


The Description section of “INIT INFO”. Defaults to Spring Boot Application for Gradle and to ${project.description} (falling back to ${project.name}) for Maven.


The chkconfig section of “INIT INFO”. Defaults to 2345 99 01.


The default value for CONF_FOLDER. Defaults to the folder containing the jar.


The default value for LOG_FOLDER. Only valid for an init.d service.


The default value for PID_FOLDER. Only valid for an init.d service.


If the start-stop-daemon command, when it’s available, should be used to control the process. Defaults to true.

Customizing script when it runs

For items of the script that need to be customized after the jar has been written you can use environment variables or a config file.

The following environment properties are supported with the default script:



The “mode” of operation. The default depends on the way the jar was built, but will usually be auto (meaning it tries to guess if it is an init script by checking if it is a symlink in a directory called init.d). You can explicitly set it to service so that the stop|start|status|restart commands work, or to run if you just want to run the script in the foreground.


If the start-stop-daemon command, when it’s available, should be used to control the process. Defaults to true.


The root name of the pid folder (/var/run by default).


The name of the folder to put log files in (/var/log by default).


The name of the folder to read .conf files from (same folder as jar-file by default).


The name of the log file in the LOG_FOLDER (<appname>.log by default).


The name of the app. If the jar is run from a symlink the script guesses the app name, but if it is not a symlink, or you want to explicitly set the app name this can be useful.


The arguments to pass to the program (the Spring Boot app).


The location of the java executable is discovered by using the PATH by default, but you can set it explicitly if there is an executable file at $JAVA_HOME/bin/java.


Options that are passed to the JVM when it is launched.


The explicit location of the jar file, in case the script is being used to launch a jar that it is not actually embedded in.


if not empty will set the -x flag on the shell process, making it easy to see the logic in the script.


The PID_FOLDER, LOG_FOLDER and LOG_FILENAME variables are only valid for an init.d service. With systemd the equivalent customizations are made using ‘service’ script. Check the service unit configuration man page for more details.

With the exception of JARFILE and APP_NAME, the above settings can be configured using a .conf file. The file is expected next to the jar file and have the same name but suffixed with .conf rather than .jar. For example, a jar named /var/myapp/myapp.jar will use the configuration file named /var/myapp/myapp.conf.




You can use a CONF_FOLDER environment variable to customize the location of the config file if you don’t like it living next to the jar.

To learn about securing this file appropriately, please refer to the guidelines for securing an init.d service.

56.2 Microsoft Windows services

Spring Boot application can be started as Windows service using winsw.

A sample maintained separately to the core of Spring Boot describes step-by-step how you can create a Windows service for your Spring Boot application.