Version 1.3.0.M1

© 2012-2017 Pivotal Software, Inc.

Copies of this document may be made for your own use and for distribution to others, provided that you do not charge any fee for such copies and further provided that each copy contains this Copyright Notice, whether distributed in print or electronically.

Getting started

If you’re just getting started with Spring Cloud Data Flow, this is the section for you! Here we answer the basic “what?”, “how?” and “why?” questions. You’ll find a gentle introduction to Spring Cloud Data Flow along with installation instructions. We’ll then build our first Spring Cloud Data Flow application, discussing some core principles as we go.

1. System Requirements

You need Java installed (Java 8 or later), and to build, you need to have Maven installed as well.

You need to have an RDBMS for storing stream, task and app states in the database. The local Data Flow server by default uses embedded H2 database for this.

You also need to have Redis running if you are running any streams that involve analytics applications. Redis may also be required run the unit/integration tests.

For the deployed streams and tasks to communicate, either RabbitMQ or Kafka needs to be installed.

2. Deploying Spring Cloud Data Flow Local Server

  1. Download the Spring Cloud Data Flow Server and Shell apps:

    wget http://repo.spring.io/milestone/org/springframework/cloud/spring-cloud-dataflow-server-local/1.3.0.M1/spring-cloud-dataflow-server-local-1.3.0.M1.jar
    
    wget http://repo.spring.io/milestone/org/springframework/cloud/spring-cloud-dataflow-shell/1.3.0.M1/spring-cloud-dataflow-shell-1.3.0.M1.jar
  2. Launch the Data Flow Server

    1. Since the Data Flow Server is a Spring Boot application, you can run it just by using java -jar.

      $ java -jar spring-cloud-dataflow-server-local-1.3.0.M1.jar
  3. Launch the shell:

    $ java -jar spring-cloud-dataflow-shell-1.3.0.M1.jar

    If the Data Flow Server and shell are not running on the same host, point the shell to the Data Flow server URL:

    server-unknown:>dataflow config server http://198.51.100.0
    Successfully targeted http://198.51.100.0
    dataflow:>

    By default, the application registry will be empty. If you would like to register all out-of-the-box stream applications built with the Kafka binder in bulk, you can with the following command. For more details, review how to register applications.

    $ dataflow:>app import --uri http://bit.ly/Bacon-RELEASE-stream-applications-kafka-10-maven
    Depending on your environment, you may need to configure the Data Flow Server to point to a custom Maven repository location or configure proxy settings. See Maven Configuration for more information.
  4. You can now use the shell commands to list available applications (source/processors/sink) and create streams. For example:

    dataflow:> stream create --name httptest --definition "http --server.port=9000 | log" --deploy
    You will need to wait a little while until the apps are actually deployed successfully before posting data. Look in the log file of the Data Flow server for the location of the log files for the http and log applications. Tail the log file for each application to verify the application has started.

    Now post some data

dataflow:> http post --target http://localhost:9000 --data "hello world"

Look to see if hello world ended up in log files for the log application.

When deploying locally, each app (and each app instance, in case of count>1) gets a dynamically assigned server.port unless you explicitly assign one with --server.port=x. In both cases, this setting is propagated as a configuration property that will override any lower-level setting that you may have used (e.g. in application.yml files).

In case you encounter unexpected errors when executing shell commands, you can retrieve more detailed error information by setting the exception logging level to WARNING in logback.xml:

<logger name="org.springframework.shell.core.JLineShellComponent.exceptions" level="WARNING"/>

2.1. Maven Configuration

If you want to override specific maven configuration properties (remote repositories, proxies, etc.) and/or run the Data Flow Server behind a proxy, you need to specify those properties as command line arguments when starting the Data Flow Server. For example:

$ java -jar spring-cloud-dataflow-server-local-1.3.0.M1.jar --maven.localRepository=mylocal
--maven.remote-repositories.repo1.url=https://repo1
--maven.remote-repositories.repo1.auth.username=user1
--maven.remote-repositories.repo1.auth.password=pass1
--maven.remote-repositories.repo2.url=https://repo2 --maven.proxy.host=proxy1
--maven.proxy.port=9010 --maven.proxy.auth.username=proxyuser1
--maven.proxy.auth.password=proxypass1

By default, the protocol is set to http. You can omit the auth properties if the proxy doesn’t need a username and password. Also, the maven localRepository is set to ${user.home}/.m2/repository/ by default. Like in the above example, the remote repositories can be specified along with their authentication (if needed). If the remote repositories are behind a proxy, then the proxy properties can be specified as above.

As these are Spring Boot @ConfigurationProperties you can also specify them as environment variables, e.g. MAVEN_REMOTE_REPOSITORIES_REPO1_URL. Another common option, is to set the properties using the SPRING_APPLICATION_JSON environment variable. An example of how the JSON is structured is shown below:

$ SPRING_APPLICATION_JSON='{ "maven": { "local-repository": null,
"remote-repositories": { "repo1": { "url": "https://repo1", "auth": { "username": "repo1user", "password": "repo1pass" } }, "repo2": { "url": "https://repo2" } },
"proxy": { "host": "proxyhost", "port": 9018, "auth": { "username": "proxyuser", "password": "proxypass" } } } }' java -jar spring-cloud-dataflow-server-local-{project-version}.jar

3. Application Configuration

You can use the following configuration properties of the Data Flow server to customize how applications are deployed.

spring.cloud.deployer.local.workingDirectoriesRoot=java.io.tmpdir # Directory in which all created processes will run and create log files.

spring.cloud.deployer.local.deleteFilesOnExit=true # Whether to delete created files and directories on JVM exit.

spring.cloud.deployer.local.envVarsToInherit=TMP,LANG,LANGUAGE,"LC_.*. # Array of regular expression patterns for environment variables that will be passed to launched applications.

spring.cloud.deployer.local.javaCmd=java # Command to run java.

spring.cloud.deployer.local.shutdownTimeout=30 # Max number of seconds to wait for app shutdown.

spring.cloud.deployer.local.javaOpts= # The Java options to pass to the JVM

When deploying the application you can also set deployer properties prefixed with deployer.<name of application>, So for example to set Java options for the time application in the ticktock stream, use the following stream deployment properties.

dataflow:> stream create --name ticktock --definition "time --server.port=9000 | log"
dataflow:> stream deploy --name ticktock --properties "deployer.time.local.javaOpts=-Xmx2048m -Dtest=foo"

As a convenience you can set the property deployer.memory to set the Java option -Xmx. So for example,

dataflow:> stream deploy --name ticktock --properties "deployer.time.memory=2048m"

At deployment time, if you specify an -Xmx option in the deployer.<app>.local.javaOpts property in addition to a value of the deployer.<app>.local.memory option, the value in the javaOpts property has precedence. Also, the javaOpts property set when deploying the application has precedence over the Data Flow server’s spring.cloud.deployer.local.javaOpts property.

Applications

A selection of pre-built stream and task/batch starter apps for various data integration and processing scenarios facilitate learning and experimentation. For more details, review how to register applications

Architecture

4. Introduction

Spring Cloud Data Flow simplifies the development and deployment of applications focused on data processing use-cases. The major concepts of the architecture are Applications, the Data Flow Server, and the target runtime.

Applications come in two flavors

  • Long lived Stream applications where an unbounded amount of data is consumed or produced via messaging middleware.

  • Short lived Task applications that process a finite set of data and then terminate.

Depending on the runtime, applications can be packaged in two ways

  • Spring Boot uber-jar that is hosted in a maven repository, file, http or any other Spring resource implementation.

  • Docker

The runtime is the place where applications execute. The target runtimes for applications are platforms that you may already be using for other application deployments.

The supported runtimes are

  • Cloud Foundry

  • Apache YARN

  • Kubernetes

  • Apache Mesos

  • Local Server for development

There is a deployer Service Provider Interface (SPI) that enables you to extend Data Flow to deploy onto other runtimes, for example to support Docker Swarm. There are community implementations of Hashicorp’s Nomad and RedHat Openshift is available. We look forward to working with the community for further contributions!

The component that is responsible for deploying applications to a runtime is the Data Flow Server. There is a Data Flow Server executable jar provided for each of the target runtimes. The Data Flow server is responsible for:

  • Interpreting and executing a stream DSL that describes the logical flow of data through multiple long lived applications.

  • Launching a long lived task application

  • Interpreting and executing a composed task DSL that describes the logical flow of data through multiple short lived applications.

  • Applyhing a deployment manifest that describes the mapping of applications onto the runtime. For example, to set the initial number of instances, memory requirements, and data partitioning.

  • Providing the runtime status of deployed applications

As an example, the stream DSL to describe the flow of data from an http source to an Apache Cassandra sink would be written as “http | cassandra”. These names in the DSL are registered with the Data Flow Server and map onto application artifacts that can be hosted in Maven or Docker repositories. Many source, processor, and sink applications for common use-cases (e.g. jdbc, hdfs, http, router) are provided by the Spring Cloud Data Flow team. The pipe symbol represents the communication between the two applications via messaging middleware. The two messaging middleware brokers that are supported are

  • Apache Kafka

  • RabbitMQ

In the case of Kafka, when deploying the stream, the Data Flow server is responsible to create the topics that correspond to each pipe symbol and configure each application to produce or consume from the topics so the desired flow of data is achieved.

The interaction of the main components is shown below

The Spring Cloud Data Flow High Level Architecture
Figure 1. The Spring Cloud Data High Level Architecure

In this diagram a DSL description of a stream is POSTed to the Data Flow Server. Based on the mapping of DSL application names to Maven and Docker artifacts, the http-source and cassandra-sink applications are deployed on the target runtime.

5. Microservice Architectural Style

The Data Flow Server deploys applications onto the target runtime that conform to the microservice architectural style. For example, a stream represents a high level application that consists of multiple small microservice applications each running in their own process. Each microservice application can be scaled up or down independent of the other and each has their own versioning lifecycle.

Both Streaming and Task based microservice applications build upon Spring Boot as the foundational library. This gives all microservice applications functionality such as health checks, security, configurable logging, monitoring and management functionality, as well as executable JAR packaging.

It is important to emphasise that these microservice applications are ‘just apps’ that you can run by yourself using ‘java -jar’ and passing in appropriate configuration properties. We provide many common microservice applications for common operations so you don’t have to start from scratch when addressing common use-cases which build upon the rich ecosystem of Spring Projects, e.g Spring Integration, Spring Data, Spring Hadoop and Spring Batch. Creating your own microservice application is similar to creating other Spring Boot applications, you can start using the Spring Initialzr web site or the UI to create the basic scaffolding of either a Stream or Task based microservice.

In addition to passing in the appropriate configuration to the applications, the Data Flow server is responsible for preparing the target platform’s infrastructure so that the application can be deployed. For example, in Cloud Foundry it would be binding specified services to the applications and executing the ‘cf push’ command for each application. For Kubernetes it would be creating the replication controller, service, and load balancer.

The Data Flow Server helps simplify the deployment of multiple applications onto a target runtime, but one could also opt to deploy each of the microservice applications manually and not use Data Flow at all. This approach might be more appropriate to start out with for small scale deployments, gradually adopting the convenience and consistency of Data Flow as you develop more applications. Manual deployment of Stream and Task based microservices is also a useful educational exercise that will help you better understand some of the automatic applications configuration and platform targeting steps that the Data Flow Server provides.

5.1. Comparison to other Platform architectures

Spring Cloud Data Flow’s architectural style is different than other Stream and Batch processing platforms. For example in Apache Spark, Apache Flink, and Google Cloud Dataflow applications run on a dedicated compute engine cluster. The nature of the compute engine gives these platforms a richer environment for performing complex calculations on the data as compared to Spring Cloud Data Flow, but it introduces complexity of another execution environment that is often not needed when creating data centric applications. That doesn’t mean you cannot do real time data computations when using Spring Cloud Data Flow. Refer to the analytics section which describes the integration of Redis to handle common counting based use-cases as well as the RxJava integration for functional API driven analytics use-cases, such as time-sliding-window and moving-average among others.

Similarly, Apache Storm, Hortonworks DataFlow and Spring Cloud Data Flow’s predecessor, Spring XD, use a dedicated application execution cluster, unique to each product, that determines where your code should execute on the cluster and perform health checks to ensure that long lived applications are restarted if they fail. Often, framework specific interfaces are required to be used in order to correctly “plug in” to the cluster’s execution framework.

As we discovered during the evolution of Spring XD, the rise of multiple container frameworks in 2015 made creating our own runtime a duplication of efforts. There is no reason to build your own resource management mechanics, when there are multiple runtime platforms that offer this functionality already. Taking these considerations into account is what made us shift to the current architecture where we delegate the execution to popular runtimes, runtimes that you may already be using for other purposes. This is an advantage in that it reduces the cognitive distance for creating and managing data centric applications as many of the same skills used for deploying other end-user/web applications are applicable.

6. Streaming Applications

While Spring Boot provides the foundation for creating DevOps friendly microservice applications, other libraries in the Spring ecosystem help create Stream based microservice applications. The most important of these is Spring Cloud Stream.

The essence of the Spring Cloud Stream programming model is to provide an easy way to describe multiple inputs and outputs of an application that communicate over messaging middleware. These input and outputs map onto Kafka topics or Rabbit exchanges and queues. Common application configuration for a Source that generates data, a Process that consumes and produces data and a Sink that consumes data is provided as part of the library.

6.1. Imperative Programming Model

Spring Cloud Stream is most closely integrated with Spring Integration’s imperative "event at a time" programming model. This means you write code that handles a single event callback. For example,

@EnableBinding(Sink.class)
public class LoggingSink {

    @StreamListener(Sink.INPUT)
    public void log(String message) {
        System.out.println(message);
    }
}

In this case the String payload of a message coming on the input channel, is handed to the log method. The @EnableBinding annotation is what is used to tie together the input channel to the external middleware.

6.2. Functional Programming Model

However, Spring Cloud Stream can support other programming styles. The use of reactive APIs where incoming and outgoing data is handled as continuous data flows and it defines how each individual message should be handled. You can also use operators that describe functional transformations from inbound to outbound data flows. The upcoming versions will support Apache Kafka’s KStream API in the programming model.

7. Streams

7.1. Topologies

The Stream DSL describes linear sequences of data flowing through the system. For example, in the stream definition http | transformer | cassandra, each pipe symbol connects the application on the left to the one on the right. Named channels can be used for routing and to fan out data to multiple messaging destinations.

Taps can be used to ‘listen in’ to the data that if flowing across any of the pipe symbols. Taps can be used as sources for new streams with an in independent life cycle.

7.2. Concurrency

For an application that will consume events, Spring Cloud stream exposes a concurrency setting that controls the size of a thread pool used for dispatching incoming messages. See the Consumer properties documentation for more information.

7.3. Partitioning

A common pattern in stream processing is to partition the data as it moves from one application to the next. Partitioning is a critical concept in stateful processing, for either performance or consistency reasons, to ensure that all related data is processed together. For example, in a time-windowed average calculation example, it is important that all measurements from any given sensor are processed by the same application instance. Alternatively, you may want to cache some data related to the incoming events so that it can be enriched without making a remote procedure call to retrieve the related data.

Spring Cloud Data Flow supports partitioning by configuring Spring Cloud Stream’s output and input bindings. Spring Cloud Stream provides a common abstraction for implementing partitioned processing use cases in a uniform fashion across different types of middleware. Partitioning can thus be used whether the broker itself is naturally partitioned (e.g., Kafka topics) or not (e.g., RabbitMQ). The following image shows how data could be partitioned into two buckets, such that each instance of the average processor application consumes a unique set of data.

Stream Partitioning Architecture
Figure 2. Spring Cloud Stream Partitioning

To use a simple partitioning strategy in Spring Cloud Data Flow, you only need set the instance count for each application in the stream and a partitionKeyExpression producer property when deploying the stream. The partitionKeyExpression identifies what part of the message will be used as the key to partition data in the underlying middleware. An ingest stream can be defined as http | averageprocessor | cassandra (Note that the Cassandra sink isn’t shown in the diagram above). Suppose the payload being sent to the http source was in JSON format and had a field called sensorId. Deploying the stream with the shell command stream deploy ingest --propertiesFile ingestStream.properties where the contents of the file ingestStream.properties are

deployer.http.count=3
deployer.averageprocessor.count=2
app.http.producer.partitionKeyExpression=payload.sensorId

will deploy the stream such that all the input and output destinations are configured for data to flow through the applications but also ensure that a unique set of data is always delivered to each averageprocessor instance. In this case the default algorithm is to evaluate payload.sensorId % partitionCount where the partitionCount is the application count in the case of RabbitMQ and the partition count of the topic in the case of Kafka.

Please refer to Passing stream partition properties during stream deployment for additional strategies to partition streams during deployment and how they map onto the underlying Spring Cloud Stream Partitioning properties.

Also note, that you can’t currently scale partitioned streams. Read the section Scaling at runtime for more information.

7.4. Message Delivery Guarantees

Streams are composed of applications that use the Spring Cloud Stream library as the basis for communicating with the underlying messaging middleware product. Spring Cloud Stream also provides an opinionated configuration of middleware from several vendors, in particular providing persistent publish-subscribe semantics.

The Binder abstraction in Spring Cloud Stream is what connects the application to the middleware. There are several configuration properties of the binder that are portable across all binder implementations and some that are specific to the middleware.

For consumer applications there is a retry policy for exceptions generated during message handling. The retry policy is configured using the common consumer properties maxAttempts, backOffInitialInterval, backOffMaxInterval, and backOffMultiplier. The default values of these properties will retry the callback method invocation 3 times and wait one second for the first retry. A backoff multiplier of 2 is used for the second and third attempts.

When the number of retry attempts has exceeded the maxAttempts value, the exception and the failed message will become the payload of a message and be sent to the application’s error channel. By default, the default message handler for this error channel logs the message. You can change the default behavior in your application by creating your own message handler that subscribes to the error channel.

Spring Cloud Stream also supports a configuration option for both Kafka and RabbitMQ binder implementations that will send the failed message and stack trace to a dead letter queue. The dead letter queue is a destination and its nature depends on the messaging middleware (e.g in the case of Kafka it is a dedicated topic). To enable this for RabbitMQ set the consumer properties republishtoDlq and autoBindDlq and the producer property autoBindDlq to true when deploying the stream. To always apply these producer and consumer properties when deploying streams, configure them as common application properties when starting the Data Flow server.

Additional messaging delivery guarantees are those provided by the underlying messaging middleware that is chosen for the application for both producing and consuming applications. Refer to the Kafka Consumer and Producer and Rabbit Consumer and Producer documentation for more details. You will find extensive declarative support for all the native QOS options.

8. Analytics

Spring Cloud Data Flow is aware of certain Sink applications that will write counter data to Redis and provides an REST endpoint to read counter data. The types of counters supported are

  • Counter - Counts the number of messages it receives, optionally storing counts in a separate store such as redis.

  • Field Value Counter - Counts occurrences of unique values for a named field in a message payload

  • Aggregate Counter - Stores total counts but also retains the total count values for each minute, hour day and month.

It is important to note that the timestamp that is used in the aggregate counter can come from a field in the message itself so that out of order messages are properly accounted.

9. Task Applications

The Spring Cloud Task programming model provides:

  • Persistence of the Task’s lifecycle events and exit code status.

  • Lifecycle hooks to execute code before or after a task execution.

  • Emit task events to a stream (as a source) during the task lifecycle.

  • Integration with Spring Batch Jobs.

10. Data Flow Server

10.1. Endpoints

The Data Flow Server uses an embedded servlet container and exposes REST endpoints for creating, deploying, undeploying, and destroying streams and tasks, querying runtime state, analytics, and the like. The Data Flow Server is implemented using Spring’s MVC framework and the Spring HATEOAS library to create REST representations that follow the HATEOAS principle.

The Spring Cloud Data Flow Server Architecture
Figure 3. The Spring Cloud Data Flow Server

10.2. Customization

Each Data Flow Server executable jar targets a single runtime by delegating to the implementation of the deployer Service Provider Interface found on the classpath.

We provide a Data Flow Server executable jar that targets a single runtime. The Data Flow server delegates to the implementation of the deployer Service Provider Interface found on the classpath. In the current version, there are no endpoints specific to a target runtime, but may be available in future releases as a convenience to access runtime specific features

While we provide a server executable for each of the target runtimes you can also create your own customized server application using Spring Initialzr. This let’s you add or remove functionality relative to the executable jar we provide. For example, adding additional security implementations, custom endpoints, or removing Task or Analytics REST endpoints. You can also enable or disable some features through the use of feature toggles.

10.3. Security

The Data Flow Server executable jars support basic http, LDAP(S), File-based, and OAuth 2.0 authentication to access its endpoints. Refer to the security section for more information.

Authorization via groups is planned for a future release.

11. Runtime

11.1. Fault Tolerance

The target runtimes supported by Data Flow all have the ability to restart a long lived application should it fail. Spring Cloud Data Flow sets up whatever health probe is required by the runtime environment when deploying the application.

The collective state of all applications that comprise the stream is used to determine the state of the stream. If an application fails, the state of the stream will change from ‘deployed’ to ‘partial’.

11.2. Resource Management

Each target runtime lets you control the amount of memory, disk and CPU that is allocated to each application. These are passed as properties in the deployment manifest using key names that are unique to each runtime. Refer to the each platforms server documentation for more information.

11.3. Scaling at runtime

When deploying a stream, you can set the instance count for each individual application that comprises the stream. Once the stream is deployed, each target runtime lets you control the target number of instances for each individual application. Using the APIs, UIs, or command line tools for each runtime, you can scale up or down the number of instances as required. Future work will provide a portable command in the Data Flow Server to perform this operation.

Currently, this is not supported with the Kafka binder (based on the 0.8 simple consumer at the time of the release), as well as partitioned streams, for which the suggested workaround is redeploying the stream with an updated number of instances. Both cases require a static consumer set up based on information about the total instance count and current instance index, a limitation intended to be addressed in future releases. For example, Kafka 0.9 and higher provides good infrastructure for scaling applications dynamically and will be available as an alternative to the current Kafka 0.8 based binder in the near future. One specific concern regarding scaling partitioned streams is the handling of local state, which is typically reshuffled as the number of instances is changed. This is also intended to be addressed in the future versions, by providing first class support for local state management.

11.4. Application Versioning

Application versioning, that is upgrading or downgrading an application from one version to another, is not directly supported by Spring Cloud Data Flow. You must rely on specific target runtime features to perform these operational tasks.

The roadmap for Spring Cloud Data Flow will deploy applications that are compatible with Spinnaker to manage the complete application lifecycle. This also includes automated canary analysis backed by application metrics. Portable commands in the Data Flow server to trigger pipelines in Spinnaker are also planned.

Server Configuration

In this section you will learn how to configure Spring Cloud Data Flow server’s features such as the relational database to use and security. You will also learn how to configure Spring Cloud Data Flow shell’s features.

12. Feature Toggles

Data Flow server offers specific set of features that can be enabled/disabled when launching. These features include all the lifecycle operations, REST endpoints (server, client implementations including Shell and the UI) for:

  1. Streams

  2. Tasks

  3. Analytics

One can enable, disable these features by setting the following boolean properties when launching the Data Flow server:

  • spring.cloud.dataflow.features.streams-enabled

  • spring.cloud.dataflow.features.tasks-enabled

  • spring.cloud.dataflow.features.analytics-enabled

By default, all the features are enabled. Note: Since analytics feature is enabled by default, the Data Flow server is expected to have a valid Redis store available as analytic repository as we provide a default implementation of analytics based on Redis. This also means that the Data Flow server’s health depends on the redis store availability as well. If you do not want to enabled HTTP endpoints to read analytics data written to Redis, then disable the analytics feature using the property mentioned above.

The REST endpoint /features provides information on the features enabled/disabled.

13. Database Configuration

A relational database is used to store stream and task definitions as well as the state of executed tasks. Spring Cloud Data Flow provides schemas for H2, HSQLDB, MySQL, Oracle, Postgresql, DB2 and SqlServer that will be automatically created when the server starts. Out of the box Spring Cloud Data Flow offers an embedded instance of the H2 database. The H2 database is good for development purposes but is not recommended for production use.

The JDBC drivers for MySQL (via MariaDB driver), HSQLDB, PostgreSQL along with embedded H2 are available out of the box. If you are using any other database, then the corresponding JDBC driver jar needs to be on the classpath of the server.

The database properties can be passed as environment variables or command-line arguments to the Data Flow Server.

  • Environment variables:

export spring_datasource_url=jdbc:postgresql://localhost:5432/mydb
export spring_datasource_username=myuser
export spring_datasource_password=mypass
export spring_datasource_driver-class-name="org.postgresql.Driver"
  • Command Line arguments If you are using MySQL:

java -jar spring-cloud-dataflow-server-local/target/spring-cloud-dataflow-server-local-1.0.0.BUILD-SNAPSHOT.jar \
    --spring.datasource.url=jdbc:mysql:<db-info> \
    --spring.datasource.username=<user> \
    --spring.datasource.password=<password> \
    --spring.datasource.driver-class-name=org.mariadb.jdbc.Driver &

If you are using PostgreSQL:

java -jar spring-cloud-dataflow-server-local/target/spring-cloud-dataflow-server-local-1.0.0.BUILD-SNAPSHOT.jar \
    --spring.datasource.url=jdbc:postgresql:<db-info> \
    --spring.datasource.username=<user> \
    --spring.datasource.password=<password> \
    --spring.datasource.driver-class-name=org.postgresql.Driver &

If you are using HSQLDB:

java -jar spring-cloud-dataflow-server-local/target/spring-cloud-dataflow-server-local-1.0.0.BUILD-SNAPSHOT.jar \
    --spring.datasource.url=jdbc:hsqldb:<db-info> \
    --spring.datasource.username=SA \
    --spring.datasource.driver-class-name=org.hsqldb.jdbc.JDBCDriver &
There is a schema update to the Spring Cloud Data Flow datastore when upgrading from version 1.0.x to 1.1.x. Migration scripts for specific database types can be found here.
If you wish to use an external H2 database instance instead of the one embedded with Spring Cloud Data Flow set the spring.dataflow.embedded.database.enabled property to false. If spring.dataflow.embedded.database.enabled is set to false or a database other than h2 is specified as the datasource the embedded database will not start.

13.1. Adding a custom JDBC driver

To add a custom driver for the database, for example Oracle, it is recommended that you rebuild the Data Flow server and add the dependency to the Maven pom.xml file. Since there is a Spring Cloud Data Flow Server for each target platform, you will need to modify the appropriate maven pom.xml for each platform. There are tags in each github repository for each server version.

To add a custom JDBC driver dependency for the local server implementation:

  1. Select the tag that corresponds to the version of the server you want to rebuild and clone the github repository.

  2. Edit the spring-cloud-dataflow-server-local/pom.xml and in the dependencies section add the dependency for the database driver required. In the sample below, and Oracle driver has been chosen.

<dependencies>
...
  <dependency>
    <groupId>com.oracle.jdbc</groupId>
    <artifactId>ojdbc8</artifactId>
    <version>12.2.0.1</version>
  </dependency>
...
</dependencies>
  1. Build the application as described here: Building Spring Cloud Data Flow

You can also provide default values when rebuilding the server by adding the following properties to the dataflow-server.yml file

For example adding postgres would look something like this:

  • dataflow-server.yml

spring:
  datasource:
    url: jdbc:postgresql://localhost:5432/mydb
    username: myuser
    password: mypass
    driver-class-name:org.postgresql.Driver

14. Security

By default, the Data Flow server is unsecured and runs on an unencrypted HTTP connection. You can secure your REST endpoints, as well as the Data Flow Dashboard by enabling HTTPS and requiring clients to authenticate using either:

  • OAuth 2.0

  • Traditional Authentication (Incl. Basic Authentication)

Authentication Options
Figure 4. Authentication Options

When choosing traditional authentication, the Spring Cloud Data Flow server will be the main authentication point, using Spring Security under the covers. When selecting this option, users then need to further define their preferred authentication mechanism aka select the desired authentication backing store:

When choosing between traditional authentication or OAuth2, keep in mind that both options are mutually exclusive. Please refer to the sub-chapters below for a more detailed discussion.

By default, the REST endpoints (administration, management and health), as well as the Dashboard UI do not require authenticated access.

14.1. Enabling HTTPS

By default, the dashboard, management, and health endpoints use HTTP as a transport. You can switch to HTTPS easily, by adding a certificate to your configuration in application.yml.

server:
  port: 8443                                         (1)
  ssl:
    key-alias: yourKeyAlias                          (2)
    key-store: path/to/keystore                      (3)
    key-store-password: yourKeyStorePassword         (4)
    key-password: yourKeyPassword                    (5)
    trust-store: path/to/trust-store                 (6)
    trust-store-password: yourTrustStorePassword     (7)
1 As the default port is 9393, you may choose to change the port to a more common HTTPs-typical port.
2 The alias (or name) under which the key is stored in the keystore.
3 The path to the keystore file. Classpath resources may also be specified, by using the classpath prefix: classpath:path/to/keystore
4 The password of the keystore.
5 The password of the key.
6 The path to the truststore file. Classpath resources may also be specified, by using the classpath prefix: classpath:path/to/trust-store
7 The password of the trust store.
If HTTPS is enabled, it will completely replace HTTP as the protocol over which the REST endpoints and the Data Flow Dashboard interact. Plain HTTP requests will fail - therefore, make sure that you configure your Shell accordingly.

14.1.1. Using Self-Signed Certificates

For testing purposes or during development it might be convenient to create self-signed certificates. To get started, execute the following command to create a certificate:

$ keytool -genkey -alias dataflow -keyalg RSA -keystore dataflow.keystore \
          -validity 3650 -storetype JKS \
          -dname "CN=localhost, OU=Spring, O=Pivotal, L=Kailua-Kona, ST=HI, C=US"  (1)
          -keypass dataflow -storepass dataflow
1 CN is the only important parameter here. It should match the domain you are trying to access, e.g. localhost.

Then add the following to your application.yml file:

server:
  port: 8443
  ssl:
    enabled: true
    key-alias: dataflow
    key-store: "/your/path/to/dataflow.keystore"
    key-store-type: jks
    key-store-password: dataflow
    key-password: dataflow

This is all that’s needed for the Data Flow Server. Once you start the server, you should be able to access it via https://localhost:8443/. As this is a self-signed certificate, you will hit a warning in your browser, that you need to ignore.

14.1.2. Self-Signed Certificates and the Shell

By default self-signed certificates are an issue for the Shell and additional steps are necessary to make the Shell work with self-signed certificates. Two options are available:

  1. Add the self-signed certificate to the JVM truststore

  2. Skip certificate validation

Add the self-signed certificate to the JVM truststore

In order to use the JVM truststore option, we need to export the previously created certificate from the keystore:

$ keytool -export -alias dataflow -keystore dataflow.keystore -file dataflow_cert -storepass dataflow

Next, we need to create a truststore which the Shell will use:

$ keytool -importcert -keystore dataflow.truststore -alias dataflow -storepass dataflow -file dataflow_cert -noprompt

Now, you are ready to launch the Data Flow Shell using the following JVM arguments:

$ java -Djavax.net.ssl.trustStorePassword=dataflow \
       -Djavax.net.ssl.trustStore=/path/to/dataflow.truststore \
       -Djavax.net.ssl.trustStoreType=jks \
       -jar spring-cloud-dataflow-shell-1.3.0.M1.jar

In case you run into trouble establishing a connection via SSL, you can enable additional logging by using and setting the javax.net.debug JVM argument to ssl.

Don’t forget to target the Data Flow Server with:

dataflow:> dataflow config server https://localhost:8443/

Skip Certificate Validation

Alternatively, you can also bypass the certification validation by providing the optional command-line parameter --dataflow.skip-ssl-validation=true.

Using this command-line parameter, the shell will accept any (self-signed) SSL certificate.

If possible you should avoid using this option. Disabling the trust manager defeats the purpose of SSL and makes you vulnerable to man-in-the-middle attacks.

14.2. Traditional Authentication

When using traditional authentication Spring Cloud Data Flow will be the sole authentication provider. In that case Dataflow REST API users would use Basic Authentication to access the endpoints.

When using that option, users have a choice of 3 backing stores for authentication details:

  • Single User Authentication using Spring Boot properties

  • File-based authentication for multiple users using a Yaml file

  • Ldap Authentication

14.2.1. Single User Authentication

This is the simplest option and mimics the behavior of the default Spring Boot user user-experience. It can be enabled by adding the following to application.yml or via environment variables:

security:
  basic:
    enabled: true                                                     (1)
    realm: Spring Cloud Data Flow                                     (2)
1 Enables basic authentication. Must be set to true for security to be enabled.
2 (Optional) The realm for Basic authentication. Will default to Spring if not explicitly set.
Current versions of Chrome do not display the realm. Please see the following Chromium issue ticket for more information.

In this use-case, the underlying Spring Boot will auto-create a user called user with an auto-generated password which will be printed out to the console upon startup.

With this setup, the generated user will have all main roles assigned:

  • VIEW

  • CREATE

  • MANAGE

Default Spring Boot user credentials
Figure 5. Default Spring Boot user credentials

You can customize the user yourself using the following properties:

security.user.name=user # Default user name.
security.user.password= # Password for the default user name. A random password is logged on startup by default.
security.user.role=VIEW, CREATE, MANAGE # Granted roles for the default user name.
Please be aware of inherent issues of Basic Authentication and logging out, since the credentials are cached by the browser and simply browsing back to application pages will log you back in.

Of course, you can also pass in credentials using system properties, environment variables or command-line arguments as this is standard Spring Boot behavior. For instance in the following example, command-line arguments are used to specify the user credentials:

$ java -jar spring-cloud-dataflow-server-local-1.3.0.M1.jar\
    --security.basic.enabled=true \
    --security.user.name=test \
    --security.user.password=pass \
    --security.user.role=VIEW

If you need to define more than one file-based user account, please take a look at File based authentication.

14.2.2. File based authentication

By default Spring Boot allows you to only specify one single user. Spring Cloud Data Flow also supports the listing of more than one user in a configuration file, as described below. Each user must be assigned a password and one or more roles:

security:
  basic:
    enabled: true
    realm: Spring Cloud Data Flow
spring:
  cloud:
    dataflow:
      security:
        authentication:
          file:
            enabled: true                                                 (1)
            users:                                                        (2)
              bob: bobspassword, ROLE_MANAGE                              (3)
              alice: alicepwd, ROLE_VIEW, ROLE_CREATE
1 Enables file based authentication
2 This is a yaml map of username to password
3 Each map value is made of a corresponding password and role(s), comma separated

14.2.3. LDAP Authentication

Spring Cloud Data Flow also supports authentication against an LDAP server (Lightweight Directory Access Protocol), providing support for the following 2 modes:

  • Direct bind

  • Search and bind

When the LDAP authentication option is activated, the default single user mode is turned off.

In direct bind mode, a pattern is defined for the user’s distinguished name (DN), using a placeholder for the username. The authentication process derives the distinguished name of the user by replacing the placeholder and use it to authenticate a user against the LDAP server, along with the supplied password. You can set up LDAP direct bind as follows:

security:
  basic:
    enabled: true
    realm: Spring Cloud Data Flow
spring:
  cloud:
    dataflow:
      security:
        authentication:
          ldap:
            enabled: true                                                 (1)
            url: ldap://ldap.example.com:3309                             (2)
            userDnPattern: uid={0},ou=people,dc=example,dc=com            (3)
1 Enables LDAP authentication
2 The URL for the LDAP server
3 The distinguished name (DN) pattern for authenticating against the server

The search and bind mode involves connecting to an LDAP server, either anonymously or with a fixed account, and searching for the distinguished name of the authenticating user based on its username, and then using the resulting value and the supplied password for binding to the LDAP server. This option is configured as follows:

security:
  basic:
    enabled: true
    realm: Spring Cloud Data Flow
spring:
  cloud:
    dataflow:
      security:
        authentication:
          ldap:
            enabled: true                                                 (1)
            url: ldap://localhost:10389                                   (2)
            managerDn: uid=admin,ou=system                                (3)
            managerPassword: secret                                       (4)
            userSearchBase: ou=otherpeople,dc=example,dc=com              (5)
            userSearchFilter: uid={0}                                     (6)
1 Enables LDAP integration
2 The URL of the LDAP server
3 A DN for to authenticate to the LDAP server, if anonymous searches are not supported (optional, required together with next option)
4 A password to authenticate to the LDAP server, if anonymous searches are not supported (optional, required together with previous option)
5 The base for searching the DN of the authenticating user (serves to restrict the scope of the search)
6 The search filter for the DN of the authenticating user
For more information, please also see the chapter LDAP Authentication of the Spring Security reference guide.
LDAP Transport Security

When connecting to an LDAP server, you typically (In the LDAP world) have 2 options in order to establish a connection to an LDAP server securely:

  • LDAP over SSL (LDAPs)

  • Start Transport Layer Security (Start TLS is defined in RFC2830)

As of Spring Cloud Data Flow 1.1.0 only LDAPs is supported out-of-the-box. When using official certificates no special configuration is necessary, in order to connect to an LDAP Server via LDAPs. Just change the url format to ldaps, e.g. ldaps://localhost:636.

In case of using self-signed certificates, the setup for your Spring Cloud Data Flow server becomes slightly more complex. The setup is very similar to Using Self-Signed Certificates (Please read first) and Spring Cloud Data Flow needs to reference a trustStore in order to work with your self-signed certificates.

While useful during development and testing, please never use self-signed certificates in production!

Ultimately you have to provide a set of system properties to reference the trustStore and its credentials when starting the server:

$ java -Djavax.net.ssl.trustStorePassword=dataflow \
       -Djavax.net.ssl.trustStore=/path/to/dataflow.truststore \
       -Djavax.net.ssl.trustStoreType=jks \
       -jar spring-cloud-starter-dataflow-server-local-1.3.0.M1.jar

As mentioned above, another option to connect to an LDAP server securely is via Start TLS. In the LDAP world, LDAPs is technically even considered deprecated in favor of Start TLS. However, this option is currently not supported out-of-the-box by Spring Cloud Data Flow.

Please follow the following issue tracker ticket to track its implementation. You may also want to look at the Spring LDAP reference documentation chapter on Custom DirContext Authentication Processing for further details.

14.2.4. Shell Authentication

When using traditional authentication with the Data Flow Shell, you typically provide a username and password using command-line arguments, e.g.:

$ java -jar target/spring-cloud-dataflow-shell-1.3.0.M1.jar  \
  --dataflow.username=myuser                                          \   (1)
  --dataflow.password=mysecret                                            (2)
1 If authentication is enabled the username must be provided
2 If the password is not provided, the shell will prompt for it

Alternatively, you can target a Data Flow server also from within the Shell:

server-unknown:>dataflow config server
  --uri  http://localhost:9393                                        \   (1)
  --username myuser                                                   \   (2)
  --password mysecret                                                 \   (3)
  --skip-ssl-validation  true                                         \   (4)
1 Optional, defaults to localhost:9393
2 Mandatory if security is enabled
3 If security is enabled, and the password is not provided, the user will be promted for it
4 Optional, ignores certificate errors (When using self-signed certificates). Use cautiously!
Target and Authenticate with the Data Flow Server from within the Shell
Figure 6. Target and Authenticate with the Data Flow Server from within the Shell

14.2.5. Customizing authorization

All of the above deals with authentication, i.e. how to assess the identity of the user. Irrespective of the option chosen, you can also customize authorization i.e. who can do what.

The default scheme uses three roles to protect the REST endpoints that Spring Cloud Data Flow exposes:

  • ROLE_VIEW for anything that relates to retrieving state

  • ROLE_CREATE for anything that involves creating, deleting or mutating the state of the system

  • ROLE_MANAGE for boot management endpoints.

All of those defaults are specified in dataflow-server-defaults.yml which is part of the Spring Cloud Data Flow Core Module. Nonetheless, you can override those, if desired, e.g. in application.yml. The configuration takes the form of a YAML list (as some rules may have precedence over others) and so you’ll need to copy/paste the whole list and tailor it to your needs (as there is no way to merge lists). Always refer to your version of application.yml, as the snippet reproduced below may be out-dated. The default rules are as such:

spring:
  cloud:
    dataflow:
      security:
        authorization:
          enabled: true
          rules:
            # Metrics

            - GET    /metrics/streams                => hasRole('ROLE_VIEW')

            # About

            - GET    /about                          => hasRole('ROLE_VIEW')

            # Metrics

            - GET    /metrics/**                     => hasRole('ROLE_VIEW')
            - DELETE /metrics/**                     => hasRole('ROLE_CREATE')

            # Boot Endpoints

            - GET    /management/**                  => hasRole('ROLE_MANAGE')

            # Apps

            - GET    /apps                           => hasRole('ROLE_VIEW')
            - GET    /apps/**                        => hasRole('ROLE_VIEW')
            - DELETE /apps/**                        => hasRole('ROLE_CREATE')
            - POST   /apps                           => hasRole('ROLE_CREATE')
            - POST   /apps/**                        => hasRole('ROLE_CREATE')

            # Completions

            - GET /completions/**                    => hasRole('ROLE_CREATE')

            # Job Executions & Batch Job Execution Steps && Job Step Execution Progress

            - GET    /jobs/executions                => hasRole('ROLE_VIEW')
            - PUT    /jobs/executions/**             => hasRole('ROLE_CREATE')
            - GET    /jobs/executions/**             => hasRole('ROLE_VIEW')

            # Batch Job Instances

            - GET    /jobs/instances                 => hasRole('ROLE_VIEW')
            - GET    /jobs/instances/*               => hasRole('ROLE_VIEW')

            # Running Applications

            - GET    /runtime/apps                   => hasRole('ROLE_VIEW')
            - GET    /runtime/apps/**                => hasRole('ROLE_VIEW')

            # Stream Definitions

            - GET    /streams/definitions            => hasRole('ROLE_VIEW')
            - GET    /streams/definitions/*          => hasRole('ROLE_VIEW')
            - GET    /streams/definitions/*/related  => hasRole('ROLE_VIEW')
            - POST   /streams/definitions            => hasRole('ROLE_CREATE')
            - DELETE /streams/definitions/*          => hasRole('ROLE_CREATE')
            - DELETE /streams/definitions            => hasRole('ROLE_CREATE')

            # Stream Deployments

            - DELETE /streams/deployments/*          => hasRole('ROLE_CREATE')
            - DELETE /streams/deployments            => hasRole('ROLE_CREATE')
            - POST   /streams/deployments/*          => hasRole('ROLE_CREATE')

            # Task Definitions

            - POST   /tasks/definitions              => hasRole('ROLE_CREATE')
            - DELETE /tasks/definitions/*            => hasRole('ROLE_CREATE')
            - GET    /tasks/definitions              => hasRole('ROLE_VIEW')
            - GET    /tasks/definitions/*            => hasRole('ROLE_VIEW')

            # Task Executions

            - GET    /tasks/executions               => hasRole('ROLE_VIEW')
            - GET    /tasks/executions/*             => hasRole('ROLE_VIEW')
            - POST   /tasks/executions               => hasRole('ROLE_CREATE')
            - DELETE /tasks/executions/*             => hasRole('ROLE_CREATE')

The format of each line is the following:

HTTP_METHOD URL_PATTERN '=>' SECURITY_ATTRIBUTE

where

Be mindful that the above is indeed a YAML list, not a map (thus the use of '-' dashes at the start of each line) that lives under the spring.cloud.dataflow.security.authorization.rules key.

In case you are solely interested in authentication but not authorization, for instance every user shall have have access to all endpoints, then you can also set spring.cloud.dataflow.security.authorization.enabled=false.

If you are using basic security configuration by using security properties then it is important to set the roles for the users.

For instance,

java -jar spring-cloud-dataflow-server-local/target/spring-cloud-dataflow-server-local-1.3.0.M1.jar \
    --security.basic.enabled=true \
    --security.user.name=test \
    --security.user.password=pass \
    --security.user.role=VIEW

14.2.6. Authorization - Shell and Dashboard Behavior

When authorization is enabled, the Dashboard and the Shell will be role-aware, meaning that depending on the assigned role(s), not all functionality may be visible.

For instance, Shell commands, for which the user does not have the necessary roles for, will be marked as unavailable.

Currently, the Shell’s help command will list commands that are unavailable. Please track the following issue: github.com/spring-projects/spring-shell/issues/115

Similarly for the Dashboard, the UI will not show pages, or page elements, for which the user is not authorized for.

14.2.7. Authorization with Ldap

When configuring Ldap for authentication, you can also specify the group-role-attribute in conjunction with group-search-base and group-search-filter.

The group role attribure contains the name of the role. If not specified, the ROLE_MANAGE role is populated by default.

For further information, please refer to Configuring an LDAP Server of the Spring Security reference guide.

14.3. OAuth 2.0

OAuth 2.0 allows you to integrate Spring Cloud Data Flow into Single Sign On (SSO) environments. The following 3 OAuth2 Grant Types will be used:

  • Authorization Code - Used for the GUI (Browser) integration. You will be redirected to your OAuth Service for authentication

  • Password - Used by the shell (And the REST integration), so you can login using username and password

  • Client Credentials - Retrieve an Access Token directly from your OAuth provider and pass it to the Dataflow server using the Authorization Http header.

The REST endpoints can be accessed using 2 ways:

  • Basic Authentication which will use the Password Grant Type under the covers to authenticate with your OAuth2 service

  • Access Token which will use the Client Credentials Grant Type under the covers

When authentication is set up, it is strongly recommended to enable HTTPS as well, especially in production environments.

You can turn on OAuth2 authentication by adding the following to application.yml or via environment variables:

security:
  oauth2:
    client:
      client-id: myclient                                             (1)
      client-secret: mysecret
      access-token-uri: http://127.0.0.1:9999/oauth/token
      user-authorization-uri: http://127.0.0.1:9999/oauth/authorize
    resource:
      user-info-uri: http://127.0.0.1:9999/me
1 Providing the Client Id in the OAuth Configuration Section will activate OAuth2 security

You can verify that basic authentication is working properly using curl:

$ curl -u myusername:mypassword http://localhost:9393/

As a result you should see a list of available REST endpoints.

Besides Basic Authentication, you can also provide an Access Token in order to access the REST Api. In order to make that happen, you would retrieve an OAuth2 Access Token from your OAuth2 provider first, and then pass that Access Token to the REST Api using the Authorization Http header:

$ curl -H "Authorization: Bearer <ACCESS_TOKEN>" http://localhost:9393/

14.3.1. OAuth REST Endpoint Authorization

The OAuth2 authentication option uses the same authorization rules as used by the Traditional Authentication option.

The authorization rules are defined in dataflow-server-defaults.yml (Part of the Spring Cloud Data Flow Core Module). Please see the chapter on customizing authorization for more details.

Due to fact that the determination of security roles is very environment-specific, Spring Cloud Data Flow will by default assign all roles to authenticated OAuth2 users using the DefaultDataflowAuthoritiesExtractor class.

You can customize that behavior by providing your own Spring bean definition that extends Spring Security OAuth’s AuthoritiesExtractor interface. In that case, the custom bean definition will take precedence over the default one provided by Spring Cloud Data Flow

14.3.2. OAuth Authentication using the Spring Cloud Data Flow Shell

If your OAuth2 provider supports the Password Grant Type you can start the Data Flow Shell with:

$ java -jar spring-cloud-dataflow-shell-1.3.0.M1.jar \
  --dataflow.uri=http://localhost:9393 \
  --dataflow.username=my_username --dataflow.password=my_password
Keep in mind that when authentication for Spring Cloud Data Flow is enabled, the underlying OAuth2 provider must support the Password OAuth2 Grant Type, if you want to use the Shell.

From within the Data Flow Shell you can also provide credentials using:

dataflow config server --uri http://localhost:9393 --username my_username --password my_password

Once successfully targeted, you should see the following output:

dataflow:>dataflow config info
dataflow config info

╔═══════════╤═══════════════════════════════════════╗
║Credentials│[username='my_username, password=****']║
╠═══════════╪═══════════════════════════════════════╣
║Result     │                                       ║
║Target     │http://localhost:9393                  ║
╚═══════════╧═══════════════════════════════════════╝

14.3.3. OAuth2 Authentication Examples

Local OAuth2 Server

With Spring Security OAuth you can easily create your own OAuth2 Server with the following 2 simple annotations:

  • @EnableResourceServer

  • @EnableAuthorizationServer

A working example application can be found at:

Simply clone the project, built and start it. Furthermore configure Spring Cloud Data Flow with the respective Client Id and Client Secret.

Authentication using GitHub

If you rather like to use an existing OAuth2 provider, here is an example for GitHub. First you need to Register a new application under your GitHub account at:

When running a default version of Spring Cloud Data Flow locally, your GitHub configuration should look like the following:

Register an OAuth Application for GitHub
Figure 7. Register an OAuth Application for GitHub
For the Authorization callback URL you will enter Spring Cloud Data Flow’s Login URL, e.g. localhost:9393/login.

Configure Spring Cloud Data Flow with the GitHub relevant Client Id and Secret:

security:
  oauth2:
    client:
      client-id: your-github-client-id
      client-secret: your-github-client-secret
      access-token-uri: https://github.com/login/oauth/access_token
      user-authorization-uri: https://github.com/login/oauth/authorize
    resource:
      user-info-uri: https://api.github.com/user
GitHub does not support the OAuth2 password grant type. As such you cannot use the Spring Cloud Data Flow Shell in conjunction with GitHub.

14.4. Securing the Spring Boot Management Endpoints

When enabling security, please also make sure that the Spring Boot HTTP Management Endpoints are secured as well. You can enable security for the management endpoints by adding the following to application.yml:

management:
  contextPath: /management
  security:
    enabled: true
If you don’t explicitly enable security for the management endpoints, you may end up having unsecured REST endpoints, despite security.basic.enabled being set to true.

15. Monitoring and Management

The Spring Cloud Data Flow server is a Spring Boot application that includes the Actuator library, which adds several production ready features to help you monitor and manage your application.

The Actuator library adds http endpoints under the context path /management that is also a discovery page for available endpoints. For example, there is a health endpoint that shows application health information and an env that lists properties from Spring’s ConfigurableEnvironment. By default only the health and application info endpoints are accessible. The other endpoints are considered to be sensitive and need to be enabled explicitly via configuration. If you are enabling sensitive endpoints then you should also secure the Data Flow server’s endpoints so that information is not inadvertently exposed to unauthenticated users. The local Data Flow server has security disabled by default, so all actuator endpoints are available.

The Data Flow server requires a relational database and if the feature toggled for analytics is enabled, a Redis server is also required. The Data Flow server will autoconfigure the DataSourceHealthIndicator and RedisHealthIndicator if needed. The health of these two services is incorporated to the overall health status of the server through the health endpoint.

15.1. Spring Boot Admin

A nice way to visualize and interact with actuator endpoints is to incorporate the Spring Boot Admin client library into the Spring Cloud Data Flow server. You can create the Spring Boot Admin application by following a few simple steps.

A simple way to have the Spring Cloud Data Flow server be a client to the Spring Boot Admin Server is by adding a dependency to the Data Flow server’s Maven pom.xml file and an additional configuration property as documented in Registering Client Applications. You will need to clone the github repository for the Spring Cloud Data Flow server in order to modify the Maven pom. There are tags in the repository for each release.

Adding this dependency will result in a UI with tabs for each of the actuator endpoints.

Spring Boot Admin UI
Figure 8. Spring Boot Admin UI

Additional configuration is required to interact with JMX beans and logging levels. Refer to the Spring Boot admin documentation for more information. As only the info and health endpoints are available to unauthenticated users, you should enable security on the Data Flow Server and also configure Spring Boot Admin server’s security so that it can securely access the actuator endpoints.

15.2. Monitoring Deployed Applications

The applications that are deployed by Spring Cloud Data Flow are based on Spring Boot which contains several features for monitoring your application in production. Each deployed application contains several web endpoints for monitoring and interacting with Stream and Task applications.

In particular, the /metrics endpoint contains counters and gauges for HTTP requests, System Metrics (such as JVM stats), DataSource Metrics and Message Channel Metrics (such as message rates). Spring Boot lets you add your own metrics to the /metrics endpoint either by registering an implementation of the PublicMetrics interface or through it’s integration with Dropwizard.

The Spring Boot interfaces MetricWriter and Exporter are used to send the metrics data to a place where they can be displayed and analyzed. There are implementations in Spring Boot to export metrics to Redis, Open TSDB, Statsd, and JMX.

There are a few additional Spring projects that provide support for sending metrics data to external systems.

The Spring Cloud Stream Emitter is used by the Spring Cloud Stream App Starters project that provides the most commonly used applications when creating Data Flow Streams.

The architecture when using Spring Cloud Stream’s Emitter, the Data Flow Metrics Collector, and the Data Flow server is shown below.

Spring Cloud Data Flow Metrics Architecture
Figure 9. Spring Cloud Data Flow Metrics Architecture

As with the App Starters, there is a Spring Boot uber jar artifact of the Metrics Collector for all of the supported binders. You can find more information on building and running the Metrics Collector on its project page.

The dataflow server now accepts an optional property spring.cloud.dataflow.metrics.collector.uri, this property should point to the URI of your deployed metrics collector app. For example, if you are running the metrics collector locally on port 8080 then start the server (local example) with the following command:

$ java -jar spring-cloud-dataflow-server-local-1.3.0.M1.jar --spring.cloud.dataflow.metrics.collector.uri=http://localhost:8080

The Metrics Collector can be secured with 'basic' authentication that requires a username and password. To set the username and password, use the properties spring.cloud.dataflow.metrics.collector.username and spring.cloud.dataflow.metrics.collector.password.

The metrics for each application are published when the property spring.cloud.stream.bindings.applicationMetrics.destination is set. This can be set as any other application property when deploying an application in Data Flow. Since it is quite common to want all applications in a stream to emit metrics, setting it at the Data Flow server level is a good way to achieve that.

spring.cloud.dataflow.applicationProperties.stream.spring.cloud.stream.bindings.applicationMetrics.destination=metrics

Using the destination name metrics is a good choice as the Metrics Collector subscribes to that name by default.

The next most common way to configure the metrics destination is using deployment properties. Here is an example for the ticktock stream that uses the App Starters time and log applications.

app register --name time --type source --uri maven://org.springframework.cloud.stream.app:time-source-rabbit:1.2.0.RELEASE

app register --name log --type sink --uri maven://org.springframework.cloud.stream.app:log-sink-rabbit:1.2.0.RELEASE

stream create --name foostream --definition "time | log"

stream deploy --name foostream --properties "app.*.spring.cloud.stream.bindings.applicationMetrics.destination=metrics,deployer.*.count=2"

The Metrics Collector exposes aggregated metrics under the HTTP endpoint /collector/metrics in JSON format. The Data Flow server accesses this endpoint in two distinct ways. The first is by exposing a /metrics/streams HTTP endpoint that acts as a proxy to the Metrics Collector endpoint. This is accessed by the UI when overlaying message rates on the Flo diagrams for each stream. It is also accessed to enrich the Data Flow /runtime/apps endpoint that is exposed in the UI via the Runtime tab and in the shell through the runtime apps command with message rates.

Stream Message Rates
Figure 10. Stream Message Rates

By default, Data Flow will set the property

spring.cloud.stream.metrics.properties=spring.application.name,spring.application.index,spring.cloud.application.*,spring.cloud.dataflow.*

Which is the set of application properties values needed to perform aggregation. It will also set the property

spring.metrics.export.triggers.application.includes=integration**`

since Data Flow will only display instantaneous input and output channel message rates. By default, all metric values in the /metric endpoint are sent so restricting it reduces the size of the message payload without impacting the functionality. Data Flow also exposes a guid property when displaying metric data which is used track back to the specific application instance that generated the metric. The guid value is platform dependent.

Note that you can override these defaults by setting then as you would any application property value.

Data Flow will not provide it’s own implementation to store and visualize historical metrics data. We will integrate with existing ALM system by providing an Exporter application that consumes messages from the same destination as the Metrics Collector and writes them to an existing ALM system. Which specific ALM system we will support is driven by user demand. However, to serve as an example, we will develop an Elastic Search exporter with a Grafana front end since it is open source.

15.3. Log and DataDog MetricWriter

If you prefer to have deployed applications bypass the centralized collection of metrics via the Metrics Collector, you can use the MetricWriters in Spring Cloud Data Flow Metrics and Spring Cloud Data Flow Metrics Datadog Metrics.

The Data Flow Metrics project provides the foundation for exporting Spring Boot metrics via MetricWriters. It provides Spring Boots AutoConfiguration to setup the writing process and common functionality such as defining a metric name prefix appropriate for your environement. For example, you may want to includes the region where the application is running in addition to the application’s name and stream/task to which it belongs. It also includes a LogMetricWriter so that metrics can be stored into the log file. While very simple in approach, log files are often ingested into application monitoring tools (such as Splunk) where they can be further processed to create dashboards of an application’s performance.

To make use of this functionality, you will need to add additional dependencies into your Stream and Task applications. To customize the "out of the box" Task and Stream applications you can use the Data Flow Initializr to generate a project and then add to the generated Maven pom file the MetricWriter implementation you want to use. The documentation on the Data Flow Metrics project pages provides the additional information you need to get started.

Shell

In this section you will learn about the options for starting the Shell and more advanced functionality relating to how it handles white spaces, quotes, and interpretation of SpEL expressions. The introductory chapters to the Stream DSL and Composed Task DSL is a good place to start for the most common usage of shell commands.

16. Shell Options

The Shell is built upon the Spring Shell project. There are command line options generic to Spring Shell and some specific to Data Flow. The shell takes the following command line options

unix:>java -jar spring-cloud-dataflow-shell-1.2.1.RELEASE.jar --help
Data Flow Options:
  --dataflow.uri=<uri>                              Address of the Data Flow Server [default: http://localhost:9393].
  --dataflow.username=<USER>                        Username of the Data Flow Server [no default].
  --dataflow.password=<PASSWORD>                    Password of the Data Flow Server [no default].
  --dataflow.credentials-provider-command=<COMMAND> Executes an external command which must return an OAuth Access Token [no default].
  --dataflow.skip-ssl-validation=<true|false>       Accept any SSL certificate (even self-signed) [default: no].
  --spring.shell.historySize=<SIZE>                 Default size of the shell log file [default: 3000].
  --spring.shell.commandFile=<FILE>                 Data Flow Shell executes commands read from the file(s) and then exits.
  --help                                            This message.

The spring.shell.commandFile option is of note, as it can be used to point to an existing file which contains all the shell commands to deploy one or many related streams and tasks. This is useful when creating some scripts to help automate the deployment.

There is also a shell command

dataflow:>script --file <YOUR_AWESOME_SCRIPT>

This is useful to help modularize a complex script into multiple indepenent files.

17. Listing available commands

Typing help at the command prompt will give a listing of all available commands. Most of the commands are for Data Flow functionality, but a few are general purpose.

! - Allows execution of operating system (OS) commands
clear - Clears the console
cls - Clears the console
date - Displays the local date and time
exit - Exits the shell
http get - Make GET request to http endpoint
http post - POST data to http endpoint
quit - Exits the shell
system properties - Shows the shell's properties
version - Displays shell version

Adding the name of the command to help will display additional information on how to invoke the command.

dataflow:>help stream create
Keyword:                   stream create
Description:               Create a new stream definition
 Keyword:                  ** default **
 Keyword:                  name
   Help:                   the name to give to the stream
   Mandatory:              true
   Default if specified:   '__NULL__'
   Default if unspecified: '__NULL__'

 Keyword:                  definition
   Help:                   a stream definition, using the DSL (e.g. "http --port=9000 | hdfs")
   Mandatory:              true
   Default if specified:   '__NULL__'
   Default if unspecified: '__NULL__'

 Keyword:                  deploy
   Help:                   whether to deploy the stream immediately
   Mandatory:              false
   Default if specified:   'true'
   Default if unspecified: 'false'

18. Tab Completion

The shell command options can be completed in the shell by hitting the TAB key after the leading --. For example, hitting TAB after stream create -- results in

dataflow:>stream create --
stream create --definition    stream create --name

If you type --de and then hit tab, --definition will be expanded.

Tab completion is also available inside the stream or composed task DSL expression for application or task properties. You can also use TAB to get hints in a stream DSL expression for what available sources, processors, or sinks can be used.

19. White space and quote rules

It is only necessary to quote parameter values if they contain spaces or the | character. Here the transform processor is being passed a SpEL expression that will be applied to any data it encounters:

transform --expression='new StringBuilder(payload).reverse()'

If the parameter value needs to embed a single quote, use two single quotes:

// Query is: Select * from /Customers where name='Smith'
scan --query='Select * from /Customers where name=''Smith'''

19.1. Quotes and Escaping

There is a Spring Shell based client that talks to the Data Flow Server that is responsible for parsing the DSL. In turn, applications may have applications properties that rely on embedded languages, such as the Spring Expression Language.

The shell, Data Flow DSL parser, and SpEL have rules about how they handle quotes and how syntax escaping works. When combined together, confusion may arise. This section explains the rules that apply and provides examples of the most complicated situations you will encounter when all three components are involved.

It’s not always that complicated

If you don’t use the Data Flow shell, for example you’re using the REST API directly, or if applications properties are not SpEL expressions, then escaping rules are simpler.

19.1.1. Shell rules

Arguably, the most complex component when it comes to quotes is the shell. The rules can be laid out quite simply, though:

  • a shell command is made of keys (--foo) and corresponding values. There is a special, key-less mapping though, see below

  • a value can not normally contain spaces, as space is the default delimiter for commands

  • spaces can be added though, by surrounding the value with quotes (either single ['] or double ["] quotes)

  • if surrounded with quotes, a value can embed a literal quote of the same kind by prefixing it with a backslash (\)

  • Other escapes are available, such as \t, \n, \r, \f and unicode escapes of the form \uxxxx

  • Lastly, the key-less mapping is handled in a special way in the sense that if does not need quoting to contain spaces

For example, the shell supports the ! command to execute native shell commands. The ! accepts a single, key-less argument. This is why the following works:

dataflow:>! rm foo

The argument here is the whole rm foo string, which is passed as is to the underlying shell.

As another example, the following commands are strictly equivalent, and the argument value is foo (without the quotes):

dataflow:>stream destroy foo
dataflow:>stream destroy --name foo
dataflow:>stream destroy "foo"
dataflow:>stream destroy --name "foo"

19.1.2. DSL parsing rules

At the parser level (that is, inside the body of a stream or task definition) the rules are the following:

  • option values are normally parsed until the first space character

  • they can be made of literal strings though, surrounded by single or double quotes

  • To embed such a quote, use two consecutive quotes of the desired kind

As such, the values of the --expression option to the filter application are semantically equivalent in the following examples:

filter --expression=payload>5
filter --expression="payload>5"
filter --expression='payload>5'
filter --expression='payload > 5'

Arguably, the last one is more readable. It is made possible thanks to the surrounding quotes. The actual expression is payload > 5 (without quotes).

Now, let’s imagine we want to test against string messages. If we’d like to compare the payload to the SpEL literal string, "foo", this is how we could do:

filter --expression=payload=='foo'           (1)
filter --expression='payload == ''foo'''     (2)
filter --expression='payload == "foo"'       (3)
1 This works because there are no spaces. Not very legible though
2 This uses single quotes to protect the whole argument, hence actual single quotes need to be doubled
3 But SpEL recognizes String literals with either single or double quotes, so this last method is arguably the best

Please note that the examples above are to be considered outside of the shell, for example if when calling the REST API directly. When entered inside the shell, chances are that the whole stream definition will itself be inside double quotes, which would need escaping. The whole example then becomes:

dataflow:>stream create foo --definition "http | filter --expression=payload='foo' | log"
dataflow:>stream create foo --definition "http | filter --expression='payload == ''foo''' | log"
dataflow:>stream create foo --definition "http | filter --expression='payload == \"foo\"' | log"

19.1.3. SpEL syntax and SpEL literals

The last piece of the puzzle is about SpEL expressions. Many applications accept options that are to be interpreted as SpEL expressions, and as seen above, String literals are handled in a special way there too. The rules are:

  • literals can be enclosed in either single or double quotes

  • quotes need to be doubled to embed a literal quote. Single quotes inside double quotes need no special treatment, and vice versa

As a last example, assume you want to use the transform processor. This processor accepts an expression option which is a SpEL expression. It is to be evaluated against the incoming message, with a default of payload (which forwards the message payload untouched).

It is important to understand that the following are equivalent:

transform --expression=payload
transform --expression='payload'

but very different from the following:

transform --expression="'payload'"
transform --expression='''payload'''

and other variations.

The first series will simply evaluate to the message payload, while the latter examples will evaluate to the actual literal string payload (again, without quotes).

19.1.4. Putting it all together

As a last, complete example, let’s review how one could force the transformation of all messages to the string literal hello world, by creating a stream in the context of the Data Flow shell:

dataflow:>stream create foo --definition "http | transform --expression='''hello world''' | log" (1)
dataflow:>stream create foo --definition "http | transform --expression='\"hello world\"' | log" (2)
dataflow:>stream create foo --definition "http | transform --expression=\"'hello world'\" | log" (2)
1 This uses single quotes around the string (at the Data Flow parser level), but they need to be doubled because we’re inside a string literal (very first single quote after the equals sign)
2 use single and double quotes respectively to encompass the whole string at the Data Flow parser level. Hence, the other kind of quote can be used inside the string. The whole thing is inside the --definition argument to the shell though, which uses double quotes. So double quotes are escaped (at the shell level)

Streams

This section goes into more detail about how you can create Streams which are a collection of Spring Cloud Stream. It covers topics such as creating and deploying Streams.

If you’re just starting out with Spring Cloud Data Flow, you should probably read the Getting Started guide before diving into this section.

20. Introduction

Streams are a collection of long lived Spring Cloud Stream applications that communicate with each other over messaging middleware. A text based DSL defines the configuration and data flow between the applications. While many applications are provided for you to implement common use-cases, you will typically create a custom Spring Cloud Stream application to implement custom business logic.

20.1. Stream Pipeline DSL

A stream is defined using a unix-inspired Pipeline syntax. The syntax uses vertical bars, also known as "pipes" to connect multiple commands. The command ls -l | grep key | less in Unix takes the output of the ls -l process and pipes it to the input of the grep key process. The output of grep in turn is sent to the input of the less process. Each | symbol will connect the standard ouput of the program on the left to the standard input of the command on the right. Data flows through the pipeline from left to right.

In Data Flow, the Unix command is replaced by a Spring Cloud Stream application and each pipe symbol represents connecting the input and output of applications via messaging middleware, such as RabbitMQ or Apache Kafka.

Each Spring Cloud Stream application is registered under a simple name. The registration process specifies where the application can be obtained, for example in a Maven Repository or a Docker registry. You can find out more information on how to register Spring Cloud Stream applications in this section. In Data Flow, we classify the Spring Cloud Stream applications as either Sources, Processors, or Sinks.

As a simple example consider the collection of data from an HTTP Source writing to a File Sink. Using the DSL the stream description is:

http | file

A stream that involves some processing would be expresed as:

http | filter | transform | file

Stream definitions can be created using the shell’s create stream command. For example:

dataflow:> stream create --name httpIngest --definition "http | file"

The Stream DSL is passed in to the --definition command option.

The deployment of stream definitions is done via the shell’s stream deploy command.

dataflow:> stream deploy --name ticktock

The Getting Started section shows you how to start the server and how to start and use the Spring Cloud Data Flow shell.

Note that shell is calling the Data Flow Servers' REST API. For more information on making HTTP request directly to the server, consult the REST API Guide.

20.2. Application properties

Each application takes properties to customize its behavior. As an example the http source module exposes a port setting which allows the data ingestion port to be changed from the default value.

dataflow:> stream create --definition "http --port=8090 | log" --name myhttpstream

This port property is actually the same as the standard Spring Boot server.port property. Data Flow adds the ability to use the shorthand form port instead of server.port. One may also specify the longhand version as well.

dataflow:> stream create --definition "http --server.port=8000 | log" --name myhttpstream

This shorthand behavior is discussed more in the section on Whitelisting application properties. If you have registered application property metadata you can use tab completion in the shell after typing -- to get a list of candidate property names.

The shell provides tab completion for application properties and also the shell command app info <appType>:<appName> provides additional documentation for all the supported properties.

Supported Stream `<appType>’s are: source, processor, and sink

21. Lifecycle of Streams

21.1. Register a Stream App

Register a Stream App with the App Registry using the Spring Cloud Data Flow Shell app register command. You must provide a unique name, application type, and a URI that can be resolved to the app artifact. For the type, specify "source", "processor", or "sink". Here are a few examples:

dataflow:>app register --name mysource --type source --uri maven://com.example:mysource:0.0.1-SNAPSHOT

dataflow:>app register --name myprocessor --type processor --uri file:///Users/example/myprocessor-1.2.3.jar

dataflow:>app register --name mysink --type sink --uri http://example.com/mysink-2.0.1.jar

When providing a URI with the maven scheme, the format should conform to the following:

maven://<groupId>:<artifactId>[:<extension>[:<classifier>]]:<version>

For example, if you would like to register the snapshot versions of the http and log applications built with the RabbitMQ binder, you could do the following:

dataflow:>app register --name http --type source --uri maven://org.springframework.cloud.stream.app:http-source-rabbit:1.2.1.BUILD-SNAPSHOT
dataflow:>app register --name log --type sink --uri maven://org.springframework.cloud.stream.app:log-sink-rabbit:1.2.1.BUILD-SNAPSHOT

If you would like to register multiple apps at one time, you can store them in a properties file where the keys are formatted as <type>.<name> and the values are the URIs.

For example, if you would like to register the snapshot versions of the http and log applications built with the RabbitMQ binder, you could have the following in a properties file [eg: stream-apps.properties]:

source.http=maven://org.springframework.cloud.stream.app:http-source-rabbit:1.2.1.BUILD-SNAPSHOT
sink.log=maven://org.springframework.cloud.stream.app:log-sink-rabbit:1.2.1.BUILD-SNAPSHOT

Then to import the apps in bulk, use the app import command and provide the location of the properties file via --uri:

dataflow:>app import --uri file:///<YOUR_FILE_LOCATION>/stream-apps.properties

For convenience, we have the static files with application-URIs (for both maven and docker) available for all the out-of-the-box stream and task/batch app-starters. You can point to this file and import all the application-URIs in bulk. Otherwise, as explained in previous paragraphs, you can register them individually or have your own custom property file with only the required application-URIs in it. It is recommended, however, to have a "focused" list of desired application-URIs in a custom property file.

List of available Stream Application Starters:

Artifact Type Stable Release SNAPSHOT Release

RabbitMQ + Maven

bit.ly/Bacon-RELEASE-stream-applications-rabbit-maven

bit.ly/Bacon-BUILD-SNAPSHOT-stream-applications-rabbit-maven

RabbitMQ + Docker

bit.ly/Bacon-RELEASE-stream-applications-rabbit-docker

N/A

Kafka 0.9 + Maven

bit.ly/Bacon-RELEASE-stream-applications-kafka-09-maven

bit.ly/Bacon-BUILD-SNAPSHOT-stream-applications-kafka-09-maven

Kafka 0.9 + Docker

bit.ly/Bacon-RELEASE-stream-applications-kafka-09-docker

N/A

Kafka 0.10 + Maven

bit.ly/Bacon-RELEASE-stream-applications-kafka-10-maven

bit.ly/Bacon-BUILD-SNAPSHOT-stream-applications-kafka-10-maven

Kafka 0.10 + Docker

bit.ly/Bacon-RELEASE-stream-applications-kafka-10-docker

N/A

List of available Task Application Starters:

Artifact Type Stable Release SNAPSHOT Release

Maven

bit.ly/Belmont-GA-task-applications-maven

bit.ly/Belmont-BUILD-SNAPSHOT-task-applications-maven

Docker

bit.ly/Belmont-GA-task-applications-docker

N/A

You can find more information about the available task starters in the Task App Starters Project Page and related reference documentation. For more information about the available stream starters look at the Stream App Starters Project Page and related reference documentation.

As an example, if you would like to register all out-of-the-box stream applications built with the RabbitMQ binder in bulk, you can with the following command.

dataflow:>app import --uri http://bit.ly/Bacon-RELEASE-stream-applications-rabbit-maven

You can also pass the --local option (which is true by default) to indicate whether the properties file location should be resolved within the shell process itself. If the location should be resolved from the Data Flow Server process, specify --local false.

When using either app register or app import, if an app is already registered with the provided name and type, it will not be overridden by default. If you would like to override the pre-existing app coordinates, then include the --force option.

Note however that once downloaded, applications may be cached locally on the Data Flow server, based on the resource location. If the resource location doesn’t change (even though the actual resource bytes may be different), then it won’t be re-downloaded. When using maven:// resources on the other hand, using a constant location still may circumvent caching (if using -SNAPSHOT versions).

Moreover, if a stream is already deployed and using some version of a registered app, then (forcibly) re-registering a different app will have no effect until the stream is deployed anew.

In some cases the Resource is resolved on the server side, whereas in others the URI will be passed to a runtime container instance where it is resolved. Consult the specific documentation of each Data Flow Server for more detail.

21.1.1. Whitelisting application properties

Stream and Task applications are Spring Boot applications which are aware of many Common application properties, e.g. server.port but also families of properties such as those with the prefix spring.jmx and logging. When creating your own application it is desirable to whitelist properties so that the shell and the UI can display them first as primary properties when presenting options via TAB completion or in drop-down boxes.

To whitelist application properties create a file named spring-configuration-metadata-whitelist.properties in the META-INF resource directory. There are two property keys that can be used inside this file. The first key is named configuration-properties.classes. The value is a comma separated list of fully qualified @ConfigurationProperty class names. The second key is configuration-properties.names whose value is a comma separated list of property names. This can contain the full name of property, such as server.port or a partial name to whitelist a category of property names, e.g. spring.jmx.

The Spring Cloud Stream application starters are a good place to look for examples of usage. Here is a simple example of the file sink’s spring-configuration-metadata-whitelist.properties file

configuration-properties.classes=org.springframework.cloud.stream.app.file.sink.FileSinkProperties

If we also wanted to add server.port to be white listed, then it would look like this:

configuration-properties.classes=org.springframework.cloud.stream.app.file.sink.FileSinkProperties
configuration-properties.names=server.port

Make sure to add 'spring-boot-configuration-processor' as an optional dependency to generate configuration metadata file for the properties.

<dependency>
    <groupId>org.springframework.boot</groupId>
    <artifactId>spring-boot-configuration-processor</artifactId>
    <optional>true</optional>
</dependency>

21.1.2. Creating and using a dedicated metadata artifact

You can go a step further in the process of describing the main properties that your stream or task app supports by creating a so-called metadata companion artifact. This simple jar file contains only the Spring boot JSON file about configuration properties metadata, as well as the whitelisting file described in the previous section.

Here is the contents of such an artifact, for the canonical log sink:

$ jar tvf log-sink-rabbit-1.2.1.BUILD-SNAPSHOT-metadata.jar
373848 META-INF/spring-configuration-metadata.json
   174 META-INF/spring-configuration-metadata-whitelist.properties

Note that the spring-configuration-metadata.json file is quite large. This is because it contains the concatenation of all the properties that are available at runtime to the log sink (some of them come from spring-boot-actuator.jar, some of them come from spring-boot-autoconfigure.jar, even some more from spring-cloud-starter-stream-sink-log.jar, etc.) Data Flow always relies on all those properties, even when a companion artifact is not available, but here all have been merged into a single file.

To help with that (as a matter of fact, you don’t want to try to craft this giant JSON file by hand), you can use the following plugin in your build:

<plugin>
 	<groupId>org.springframework.cloud</groupId>
 	<artifactId>spring-cloud-app-starter-metadata-maven-plugin</artifactId>
 	<executions>
 		<execution>
 			<id>aggregate-metadata</id>
 			<phase>compile</phase>
 			<goals>
 				<goal>aggregate-metadata</goal>
 			</goals>
 		</execution>
 	</executions>
 </plugin>
This plugin comes in addition to the spring-boot-configuration-processor that creates the individual JSON files. Be sure to configure the two!

The benefits of a companion artifact are manifold:

  1. being way lighter (usually a few kilobytes, as opposed to megabytes for the actual app), they are quicker to download, allowing quicker feedback when using e.g. app info or the Dashboard UI

  2. as a consequence of the above, they can be used in resource constrained environments (such as PaaS) when metadata is the only piece of information needed

  3. finally, for environments that don’t deal with boot uberjars directly (for example, Docker-based runtimes such as Kubernetes or Mesos), this is the only way to provide metadata about the properties supported by the app.

Remember though, that this is entirely optional when dealing with uberjars. The uberjar itself also includes the metadata in it already.

21.1.3. Using the companion artifact

Once you have a companion artifact at hand, you need to make the system aware of it so that it can be used.

When registering a single app via app register, you can use the optional --metadata-uri option in the shell, like so:

dataflow:>app register --name log --type sink
    --uri maven://org.springframework.cloud.stream.app:log-sink-kafka-10:1.2.1.BUILD-SNAPSHOT
    --metadata-uri=maven://org.springframework.cloud.stream.app:log-sink-kafka-10:jar:metadata:1.2.1.BUILD-SNAPSHOT

When registering several files using the app import command, the file should contain a <type>.<name>.metadata line in addition to each <type>.<name> line. This is optional (i.e. if some apps have it but some others don’t, that’s fine).

Here is an example for a Dockerized app, where the metadata artifact is being hosted in a Maven repository (but retrieving it via http:// or file:// would be equally possible).

...
source.http=docker:springcloudstream/http-source-rabbit:latest
source.http.metadata=maven://org.springframework.cloud.stream.app:http-source-rabbit:jar:metadata:1.2.1.BUILD-SNAPSHOT
...

21.2. Creating custom applications

While there are out of the box source, processor, sink applications available, one can extend these applications or write a custom Spring Cloud Stream application.

The process of creating Spring Cloud Stream applications via Spring Initializr is detailed in the Spring Cloud Stream documentation. It is possible to include multiple binders to an application. If doing so, refer the instructions in Passing Spring Cloud Stream properties for the application on how to configure them.

For supporting property whitelisting, Spring Cloud Stream applications running in Spring Cloud Data Flow may include the Spring Boot configuration-processor as an optional dependency, as in the following example.

<dependencies>
  <!-- other dependencies -->
  <dependency>
    <groupId>org.springframework.boot</groupId>
    <artifactId>spring-boot-configuration-processor</artifactId>
    <optional>true</optional>
  </dependency>
</dependencies>

Make sure that the spring-boot-maven-plugin is included in the POM. The plugin is necesary for creating the executable jar that will be registered with Spring Cloud Data Flow. Spring Initialzr will include the plugin in the generated POM.

Once a custom application has been created, it can be registered as described in Register a Stream App.

21.3. Creating a Stream

The Spring Cloud Data Flow Server exposes a full RESTful API for managing the lifecycle of stream definitions, but the easiest way to use is it is via the Spring Cloud Data Flow shell. Start the shell as described in the Getting Started section.

New streams are created by with the help of stream definitions. The definitions are built from a simple DSL. For example, let’s walk through what happens if we execute the following shell command:

dataflow:> stream create --definition "time | log" --name ticktock

This defines a stream named ticktock based off the DSL expression time | log. The DSL uses the "pipe" symbol |, to connect a source to a sink.

Then to deploy the stream execute the following shell command (or alternatively add the --deploy flag when creating the stream so that this step is not needed):

dataflow:> stream deploy --name ticktock

The Data Flow Server resolves time and log to maven coordinates and uses those to launch the time and log applications of the stream.

2016-06-01 09:41:21.728  INFO 79016 --- [nio-9393-exec-6] o.s.c.d.spi.local.LocalAppDeployer       : deploying app ticktock.log instance 0
   Logs will be in /var/folders/wn/8jxm_tbd1vj28c8vj37n900m0000gn/T/spring-cloud-dataflow-912434582726479179/ticktock-1464788481708/ticktock.log
2016-06-01 09:41:21.914  INFO 79016 --- [nio-9393-exec-6] o.s.c.d.spi.local.LocalAppDeployer       : deploying app ticktock.time instance 0
   Logs will be in /var/folders/wn/8jxm_tbd1vj28c8vj37n900m0000gn/T/spring-cloud-dataflow-912434582726479179/ticktock-1464788481910/ticktock.time

In this example, the time source simply sends the current time as a message each second, and the log sink outputs it using the logging framework. You can tail the stdout log (which has an "_<instance>" suffix). The log files are located within the directory displayed in the Data Flow Server’s log output, as shown above.

$ tail -f /var/folders/wn/8jxm_tbd1vj28c8vj37n900m0000gn/T/spring-cloud-dataflow-912434582726479179/ticktock-1464788481708/ticktock.log/stdout_0.log
2016-06-01 09:45:11.250  INFO 79194 --- [  kafka-binder-] log.sink    : 06/01/16 09:45:11
2016-06-01 09:45:12.250  INFO 79194 --- [  kafka-binder-] log.sink    : 06/01/16 09:45:12
2016-06-01 09:45:13.251  INFO 79194 --- [  kafka-binder-] log.sink    : 06/01/16 09:45:13

21.3.1. Application properties

Application properties are the properties associated with each application in the stream. When the application is deployed, the application properties are applied to the application via command line arguments or environment variables based on the underlying deployment implementation.

Passing application properties when creating a stream

The following stream

dataflow:> stream create --definition "time | log" --name ticktock

can have application properties defined at the time of stream creation.

The shell command app info <appType>:<appName> displays the white-listed application properties for the application. For more info on the property white listing refer to Whitelisting application properties

Below are the white listed properties for the app time:

dataflow:> app info source:time
╔══════════════════════════════╤══════════════════════════════╤══════════════════════════════╤══════════════════════════════╗
║         Option Name          │         Description          │           Default            │             Type             ║
╠══════════════════════════════╪══════════════════════════════╪══════════════════════════════╪══════════════════════════════╣
║trigger.time-unit             │The TimeUnit to apply to delay│<none>                        │java.util.concurrent.TimeUnit ║
║                              │values.                       │                              │                              ║
║trigger.fixed-delay           │Fixed delay for periodic      │1                             │java.lang.Integer             ║
║                              │triggers.                     │                              │                              ║
║trigger.cron                  │Cron expression value for the │<none>                        │java.lang.String              ║
║                              │Cron Trigger.                 │                              │                              ║
║trigger.initial-delay         │Initial delay for periodic    │0                             │java.lang.Integer             ║
║                              │triggers.                     │                              │                              ║
║trigger.max-messages          │Maximum messages per poll, -1 │1                             │java.lang.Long                ║
║                              │means infinity.               │                              │                              ║
║trigger.date-format           │Format for the date value.    │<none>                        │java.lang.String              ║
╚══════════════════════════════╧══════════════════════════════╧══════════════════════════════╧══════════════════════════════╝

Below are the white listed properties for the app log:

dataflow:> app info sink:log
╔══════════════════════════════╤══════════════════════════════╤══════════════════════════════╤══════════════════════════════╗
║         Option Name          │         Description          │           Default            │             Type             ║
╠══════════════════════════════╪══════════════════════════════╪══════════════════════════════╪══════════════════════════════╣
║log.name                      │The name of the logger to use.│<none>                        │java.lang.String              ║
║log.level                     │The level at which to log     │<none>                        │org.springframework.integratio║
║                              │messages.                     │                              │n.handler.LoggingHandler$Level║
║log.expression                │A SpEL expression (against the│payload                       │java.lang.String              ║
║                              │incoming message) to evaluate │                              │                              ║
║                              │as the logged message.        │                              │                              ║
╚══════════════════════════════╧══════════════════════════════╧══════════════════════════════╧══════════════════════════════╝

The application properties for the time and log apps can be specified at the time of stream creation as follows:

dataflow:> stream create --definition "time --fixed-delay=5 | log --level=WARN" --name ticktock

Note that the properties fixed-delay and level defined above for the apps time and log are the 'short-form' property names provided by the shell completion. These 'short-form' property names are applicable only for the white-listed properties and in all other cases, only fully qualified property names should be used.

21.3.2. Deployment properties

When deploying the stream, properties that control the deployment of the apps into the target platform are known as deployment properties. For instance, one can specify how many instances need to be deployed for the specific application defined in the stream using the deployment property called count.

Application properties versus Deployer properties

Starting with version 1.2, the distinction between properties that are meant for the deployed app and properties that govern how this app is deployed (thanks to some implementation of a spring cloud deployer) is more explicit. The former should be passed using the syntax app.<app-name>.<property-name>=<value> while the latter use the deployer.<app-name>.<short-property-name>=<value>

The following table recaps the difference in behavior between the two.

Application Properties Deployer Properties

Example Syntax

app.filter.expression=foo

deployer.filter.count=3

What the application "sees"

expression=foo or <some-prefix>.expression=foo if expression is one of the whitelisted properties

Nothing

What the deployer "sees"

Nothing

spring.cloud.deployer.count=3 The spring.cloud.deployer prefix is automatically and always prepended to the property name

Typical usage

Passing/Overriding application properties, passing Spring Cloud Stream binder or partitionning properties

Setting the number of instances, memory, disk, etc.

Passing instance count as deployment property

If you would like to have multiple instances of an application in the stream, you can include a deployer property with the deploy command:

dataflow:> stream deploy --name ticktock --properties "deployer.time.count=3"

Note that count is the reserved property name used by the underlying deployer. Hence, if the application also has a custom property named count, it is not supported when specified in 'short-form' form during stream deployment as it could conflict with the instance count deployer property. Instead, the count as a custom application property can be specified in its fully qualified form (example: app.foo.bar.count) during stream deployment or it can be specified using 'short-form' or fully qualified form during the stream creation where it will be considered as an app property.

Inline vs file reference properties

When using the Spring Cloud Data Flow Shell, there are two ways to provide deployment properties: either inline or via a file reference. Those two ways are exclusive and documented below:

Inline properties

use the --properties shell option and list properties as a comma separated list of key=value pairs, like so:

stream deploy foo
    --properties "deployer.transform.count=2,app.transform.producer.partitionKeyExpression=payload"
Using a file reference

use the --propertiesFile option and point it to a local .properties, .yaml or .yml file (i.e. that lives in the filesystem of the machine running the shell). Being read as a .properties file, normal rules apply (ISO 8859-1 encoding, =, <space> or : delimiter, etc.) although we recommend using = as a key-value pair delimiter for consistency:

stream deploy foo --propertiesFile myprops.properties

where myprops.properties contains:

deployer.transform.count=2
app.transform.producer.partitionKeyExpression=payload

Both the above properties will be passed as deployment properties for the stream foo above.

In case of using YAML as the format for the deployment properties, use the .yaml or .yml file extention when deploying the stream,

stream deploy foo --propertiesFile myprops.yaml

where myprops.yaml contains:

deployer:
  transform:
    count: 2
app:
  transform:
    producer:
      partitionKeyExpression: payload
Passing application properties when deploying a stream

The application properties can also be specified when deploying a stream. When specified during deployment, these application properties can either be specified as 'short-form' property names (applicable for white-listed properties) or fully qualified property names. The application properties should have the prefix "app.<appName/label>".

For example, the stream

dataflow:> stream create --definition "time | log" --name ticktock

can be deployed with application properties using the 'short-form' property names:

dataflow:>stream deploy ticktock --properties "app.time.fixed-delay=5,app.log.level=ERROR"

When using the app label,

stream create ticktock --definition "a: time | b: log"

the application properties can be defined as:

stream deploy ticktock --properties "app.a.fixed-delay=4,app.b.level=ERROR"
Passing Spring Cloud Stream properties for the application

Spring Cloud Data Flow sets the required Spring Cloud Stream properties for the applications inside the stream. Most importantly, the spring.cloud.stream.bindings.<input/output>.destination is set internally for the apps to bind.

If someone wants to override any of the Spring Cloud Stream properties, they can be set via deployment properties.

For example, for the below stream

dataflow:> stream create --definition "http | transform --expression=payload.getValue('hello').toUpperCase() | log" --name ticktock

if there are multiple binders available in the classpath for each of the applications and the binder is chosen for each deployment then the stream can be deployed with the specific Spring Cloud Stream properties as:

dataflow:>stream deploy ticktock --properties "app.time.spring.cloud.stream.bindings.output.binder=kafka,app.transform.spring.cloud.stream.bindings.input.binder=kafka,app.transform.spring.cloud.stream.bindings.output.binder=rabbit,app.log.spring.cloud.stream.bindings.input.binder=rabbit"
Overriding the destination names is not recommended as Spring Cloud Data Flow takes care of setting this internally.
Passing per-binding producer consumer properties

A Spring Cloud Stream application can have producer and consumer properties set per-binding basis. While Spring Cloud Data Flow supports specifying short-hand notation for per binding producer properties such as partitionKeyExpression, partitionKeyExtractorClass as described in Passing stream partition properties during stream deployment, all the supported Spring Cloud Stream producer/consumer properties can be set as Spring Cloud Stream properties for the app directly as well.

The consumer properties can be set for the inbound channel name with the prefix app.[app/label name].spring.cloud.stream.bindings.<channelName>.consumer. and the producer properties can be set for the outbound channel name with the prefix app.[app/label name].spring.cloud.stream.bindings.<channelName>.producer.. For example, the stream

dataflow:> stream create --definition "time | log" --name ticktock

can be deployed with producer/consumer properties as:

dataflow:>stream deploy ticktock --properties "app.time.spring.cloud.stream.bindings.output.producer.requiredGroups=myGroup,app.time.spring.cloud.stream.bindings.output.producer.headerMode=raw,app.log.spring.cloud.stream.bindings.input.consumer.concurrency=3,app.log.spring.cloud.stream.bindings.input.consumer.maxAttempts=5"

The binder specific producer/consumer properties can also be specified in a similar way.

For instance

dataflow:>stream deploy ticktock --properties "app.time.spring.cloud.stream.rabbit.bindings.output.producer.autoBindDlq=true,app.log.spring.cloud.stream.rabbit.bindings.input.consumer.transacted=true"
Passing stream partition properties during stream deployment

A common pattern in stream processing is to partition the data as it is streamed. This entails deploying multiple instances of a message consuming app and using content-based routing so that messages with a given key (as determined at runtime) are always routed to the same app instance. You can pass the partition properties during stream deployment to declaratively configure a partitioning strategy to route each message to a specific consumer instance.

See below for examples of deploying partitioned streams:

app.[app/label name].producer.partitionKeyExtractorClass

The class name of a PartitionKeyExtractorStrategy (default null)

app.[app/label name].producer.partitionKeyExpression

A SpEL expression, evaluated against the message, to determine the partition key; only applies if partitionKeyExtractorClass is null. If both are null, the app is not partitioned (default null)

app.[app/label name].producer.partitionSelectorClass

The class name of a PartitionSelectorStrategy (default null)

app.[app/label name].producer.partitionSelectorExpression

A SpEL expression, evaluated against the partition key, to determine the partition index to which the message will be routed. The final partition index will be the return value (an integer) modulo [nextModule].count. If both the class and expression are null, the underlying binder’s default PartitionSelectorStrategy will be applied to the key (default null)

In summary, an app is partitioned if its count is > 1 and the previous app has a partitionKeyExtractorClass or partitionKeyExpression (class takes precedence). When a partition key is extracted, the partitioned app instance is determined by invoking the partitionSelectorClass, if present, or the partitionSelectorExpression % partitionCount, where partitionCount is application count in the case of RabbitMQ, and the underlying partition count of the topic in the case of Kafka.

If neither a partitionSelectorClass nor a partitionSelectorExpression is present the result is key.hashCode() % partitionCount.

Passing application content type properties

In a stream definition you can specify that the input or the output of an application need to be converted to a different type. You can use the inputType and outputType properties to specify the content type for the incoming data and outgoing data, respectively.

For example, consider the following stream:

dataflow:>stream create tuple --definition "http | filter --inputType=application/x-spring-tuple
 --expression=payload.hasFieldName('hello') | transform --expression=payload.getValue('hello').toUpperCase()
 | log" --deploy

The http app is expected to send the data in JSON and the filter app receives the JSON data and processes it as a Spring Tuple. In order to do so, we use the inputType property on the filter app to convert the data into the expected Spring Tuple format. The transform application processes the Tuple data and sends the processed data to the downstream log application.

When sending some data to the http application:

dataflow:>http post --data {"hello":"world","foo":"bar"} --contentType application/json --target http://localhost:<http-port>

At the log application you see the content as follows:

INFO 18745 --- [transform.tuple-1] log.sink                                 : WORLD

Depending on how applications are chained, the content type conversion can be specified either as via the --outputType in the upstream app or as an --inputType in the downstream app. For instance, in the above stream, instead of specifying the --inputType on the 'transform' application to convert, the option --outputType=application/x-spring-tuple can also be specified on the 'http' application.

For the complete list of message conversion and message converters, please refer to Spring Cloud Stream documentation.

Overriding application properties during stream deployment

Application properties that are defined during deployment override the same properties defined during the stream creation.

For example, the following stream has application properties defined during stream creation:

dataflow:> stream create --definition "time --fixed-delay=5 | log --level=WARN" --name ticktock

To override these application properties, one can specify the new property values during deployment:

dataflow:>stream deploy ticktock --properties "app.time.fixed-delay=4,app.log.level=ERROR"

21.3.3. Common application properties

In addition to configuration via DSL, Spring Cloud Data Flow provides a mechanism for setting common properties to all the streaming applications that are launched by it. This can be done by adding properties prefixed with spring.cloud.dataflow.applicationProperties.stream when starting the server. When doing so, the server will pass all the properties, without the prefix, to the instances it launches.

For example, all the launched applications can be configured to use a specific Kafka broker by launching the Data Flow server with the following options:

--spring.cloud.dataflow.applicationProperties.stream.spring.cloud.stream.kafka.binder.brokers=192.168.1.100:9092
--spring.cloud.dataflow.applicationProperties.stream.spring.cloud.stream.kafka.binder.zkNodes=192.168.1.100:2181

This will cause the properties spring.cloud.stream.kafka.binder.brokers and spring.cloud.stream.kafka.binder.zkNodes to be passed to all the launched applications.

Properties configured using this mechanism have lower precedence than stream deployment properties. They will be overridden if a property with the same key is specified at stream deployment time (e.g. app.http.spring.cloud.stream.kafka.binder.brokers will override the common property).

21.4. Destroying a Stream

You can delete a stream by issuing the stream destroy command from the shell:

dataflow:> stream destroy --name ticktock

If the stream was deployed, it will be undeployed before the stream definition is deleted.

21.5. Deploying and Undeploying Streams

Often you will want to stop a stream, but retain the name and definition for future use. In that case you can undeploy the stream by name and issue the deploy command at a later time to restart it.

dataflow:> stream undeploy --name ticktock
dataflow:> stream deploy --name ticktock

22. Stream DSL

This section covers additional features of the Stream DSL not covered in the Stream DSL introduction.

22.1. Tap a Stream

Taps can be created at various producer endpoints in a stream. For a stream like this:

stream create --definition "http | step1: transform --expression=payload.toUpperCase() | step2: transform --expression=payload+'!' | log" --name mainstream --deploy

taps can be created at the output of http, step1 and step2.

To create a stream that acts as a 'tap' on another stream requires to specify the source destination name for the tap stream. The syntax for source destination name is:

`:<streamName>.<label/appName>`

To create a tap at the output of http in the stream above, the source destination name is mainstream.http To create a tap at the output of the first transform app in the stream above, the source destination name is mainstream.step1

The tap stream DSL looks like this:

stream create --definition ":mainstream.http > counter" --name tap_at_http --deploy

stream create --definition ":mainstream.step1 > jdbc" --name tap_at_step1_transformer --deploy

Note the colon (:) prefix before the destination names. The colon allows the parser to recognize this as a destination name instead of an app name.

22.2. Using Labels in a Stream

When a stream is comprised of multiple apps with the same name, they must be qualified with labels:

stream create --definition "http | firstLabel: transform --expression=payload.toUpperCase() | secondLabel: transform --expression=payload+'!' | log" --name myStreamWithLabels --deploy

22.3. Named Destinations

Instead of referencing a source or sink applications, you can use a named destination. A named destination corresponds to a specific destination name in the middleware broker (Rabbit, Kafka, etc.,). When using the | symbol, applications are connected to each other using messaging middleware destination names created by the Data Flow server. In keeping with the unix analogy, one can redirect standard input and output using the less-than < greater-than > charaters. To specify the name of the destination, prefix it with a colon :. For example the following stream has the destination name in the source position:

dataflow:>stream create --definition ":myDestination > log" --name ingest_from_broker --deploy

This stream receives messages from the destination myDestination located at the broker and connects it to the log app. You can also create additional streams that will consume data from the same named destination.

The following stream has the destination name in the sink position:

dataflow:>stream create --definition "http > :myDestination" --name ingest_to_broker --deploy

It is also possible to connect two different destinations (source and sink positions) at the broker in a stream.

dataflow:>stream create --definition ":destination1 > :destination2" --name bridge_destinations --deploy

In the above stream, both the destinations (destination1 and destination2) are located in the broker. The messages flow from the source destination to the sink destination via a bridge app that connects them.

22.4. Fan-in and Fan-out

Using named destinations, you can support Fan-in and Fan-out use cases. Fan-in use cases are when multiple sources all send data to the same named destination. For example

s3 > :data
ftp > :data
http > :data

Would direct the data payloads from the Amazon S3, FTP, and HTTP sources to the same named destination called data. Then an additional stream created with the DSL expression

:data > file

would have all the data from those three sources sent to the file sink.

The Fan-out use case is when you determine the destination of a stream based on some information that is only known at runtime. In this case, the Router Application can be used to specify how to direct the incoming message to one of N named destinations.

23. Stream applications with multiple binder configurations

In some cases, a stream can have its applications bound to multiple spring cloud stream binders when they are required to connect to different messaging middleware configurations. In those cases, it is important to make sure the applications are configured appropriately with their binder configurations. For example, let’s consider the following stream:

http | transform --expression=payload.toUpperCase() | log

and in this stream, each application connects to messaging middleware in the following way:

Http source sends events to RabbitMQ (rabbit1)
Transform processor receives events from RabbitMQ (rabbit1) and sends the processed events into Kafka (kafka1)
Log sink receives events from Kafka (kafka1)

Here, rabbit1 and kafka1 are the binder names given in the spring cloud stream application properties. Based on this setup, the applications will have the following binder(s) in their classpath with the appropriate configuration:

Http - Rabbit binder
Transform - Both Kafka and Rabbit binders
Log - Kafka binder

The spring-cloud-stream binder configuration properties can be set within the applications themselves. If not, they can be passed via deployment properties when the stream is deployed.

For example,

dataflow:>stream create --definition "http | transform --expression=payload.toUpperCase() | log" --name mystream
dataflow:>stream deploy mystream --properties "app.http.spring.cloud.stream.bindings.output.binder=rabbit1,app.transform.spring.cloud.stream.bindings.input.binder=rabbit1,
app.transform.spring.cloud.stream.bindings.output.binder=kafka1,app.log.spring.cloud.stream.bindings.input.binder=kafka1"

One can override any of the binder configuration properties by specifying them via deployment properties.

24. Examples

24.1. Simple Stream Processing

As an example of a simple processing step, we can transform the payload of the HTTP posted data to upper case using the stream definitions

http | transform --expression=payload.toUpperCase() | log

To create this stream enter the following command in the shell

dataflow:> stream create --definition "http | transform --expression=payload.toUpperCase() | log" --name mystream --deploy

Posting some data (using a shell command)

dataflow:> http post --target http://localhost:1234 --data "hello"

Will result in an uppercased 'HELLO' in the log

2016-06-01 09:54:37.749  INFO 80083 --- [  kafka-binder-] log.sink    : HELLO

24.2. Stateful Stream Processing

To demonstrate the data partitioning functionality, let’s deploy the following stream with Kafka as the binder.

dataflow:>stream create --name words --definition "http --server.port=9900 | splitter --expression=payload.split(' ') | log"
Created new stream 'words'

dataflow:>stream deploy words --properties "app.splitter.producer.partitionKeyExpression=payload,deployer.log.count=2"
Deployed stream 'words'

dataflow:>http post --target http://localhost:9900 --data "How much wood would a woodchuck chuck if a woodchuck could chuck wood"
> POST (text/plain;Charset=UTF-8) http://localhost:9900 How much wood would a woodchuck chuck if a woodchuck could chuck wood
> 202 ACCEPTED

You’ll see the following in the server logs.

2016-06-05 18:33:24.982  INFO 58039 --- [nio-9393-exec-9] o.s.c.d.spi.local.LocalAppDeployer       : deploying app words.log instance 0
   Logs will be in /var/folders/c3/ctx7_rns6x30tq7rb76wzqwr0000gp/T/spring-cloud-dataflow-694182453710731989/words-1465176804970/words.log
2016-06-05 18:33:24.988  INFO 58039 --- [nio-9393-exec-9] o.s.c.d.spi.local.LocalAppDeployer       : deploying app words.log instance 1
   Logs will be in /var/folders/c3/ctx7_rns6x30tq7rb76wzqwr0000gp/T/spring-cloud-dataflow-694182453710731989/words-1465176804970/words.log

Review the words.log instance 0 logs:

2016-06-05 18:35:47.047  INFO 58638 --- [  kafka-binder-] log.sink                                 : How
2016-06-05 18:35:47.066  INFO 58638 --- [  kafka-binder-] log.sink                                 : chuck
2016-06-05 18:35:47.066  INFO 58638 --- [  kafka-binder-] log.sink                                 : chuck

Review the words.log instance 1 logs:

2016-06-05 18:35:47.047  INFO 58639 --- [  kafka-binder-] log.sink                                 : much
2016-06-05 18:35:47.066  INFO 58639 --- [  kafka-binder-] log.sink                                 : wood
2016-06-05 18:35:47.066  INFO 58639 --- [  kafka-binder-] log.sink                                 : would
2016-06-05 18:35:47.066  INFO 58639 --- [  kafka-binder-] log.sink                                 : a
2016-06-05 18:35:47.066  INFO 58639 --- [  kafka-binder-] log.sink                                 : woodchuck
2016-06-05 18:35:47.067  INFO 58639 --- [  kafka-binder-] log.sink                                 : if
2016-06-05 18:35:47.067  INFO 58639 --- [  kafka-binder-] log.sink                                 : a
2016-06-05 18:35:47.067  INFO 58639 --- [  kafka-binder-] log.sink                                 : woodchuck
2016-06-05 18:35:47.067  INFO 58639 --- [  kafka-binder-] log.sink                                 : could
2016-06-05 18:35:47.067  INFO 58639 --- [  kafka-binder-] log.sink                                 : wood

This shows that payload splits that contain the same word are routed to the same application instance.

24.3. Other Source and Sink Application Types

Let’s try something a bit more complicated and swap out the time source for something else. Another supported source type is http, which accepts data for ingestion over HTTP POSTs. Note that the http source accepts data on a different port from the Data Flow Server (default 8080). By default the port is randomly assigned.

To create a stream using an http source, but still using the same log sink, we would change the original command above to

dataflow:> stream create --definition "http | log" --name myhttpstream --deploy

which will produce the following output from the server

2016-06-01 09:47:58.920  INFO 79016 --- [io-9393-exec-10] o.s.c.d.spi.local.LocalAppDeployer       : deploying app myhttpstream.log instance 0
   Logs will be in /var/folders/wn/8jxm_tbd1vj28c8vj37n900m0000gn/T/spring-cloud-dataflow-912434582726479179/myhttpstream-1464788878747/myhttpstream.log
2016-06-01 09:48:06.396  INFO 79016 --- [io-9393-exec-10] o.s.c.d.spi.local.LocalAppDeployer       : deploying app myhttpstream.http instance 0
   Logs will be in /var/folders/wn/8jxm_tbd1vj28c8vj37n900m0000gn/T/spring-cloud-dataflow-912434582726479179/myhttpstream-1464788886383/myhttpstream.http

Note that we don’t see any other output this time until we actually post some data (using a shell command). In order to see the randomly assigned port on which the http source is listening, execute:

dataflow:> runtime apps

You should see that the corresponding http source has a url property containing the host and port information on which it is listening. You are now ready to post to that url, e.g.:

dataflow:> http post --target http://localhost:1234 --data "hello"
dataflow:> http post --target http://localhost:1234 --data "goodbye"

and the stream will then funnel the data from the http source to the output log implemented by the log sink

2016-06-01 09:50:22.121  INFO 79654 --- [  kafka-binder-] log.sink    : hello
2016-06-01 09:50:26.810  INFO 79654 --- [  kafka-binder-] log.sink    : goodbye

Of course, we could also change the sink implementation. You could pipe the output to a file (file), to hadoop (hdfs) or to any of the other sink apps which are available. You can also define your own apps.

Tasks

This section goes into more detail about how you can work with Spring Cloud Task. It covers topics such as creating and running task applications.

If you’re just starting out with Spring Cloud Data Flow, you should probably read the Getting Started guide before diving into this section.

25. Introduction

A task executes a process on demand. In this case a task is a Spring Boot application that is annotated with @EnableTask. Hence a user launches a task that performs a certain process, and once complete the task ends. An example of a task would be a boot application that exports data from a JDBC repository to an HDFS instance. Tasks record the start time and the end time as well as the boot exit code in a relational database. The task implementation is based on the Spring Cloud Task project.

26. The Lifecycle of a Task

Before we dive deeper into the details of creating Tasks, we need to understand the typical lifecycle for tasks in the context of Spring Cloud Data Flow:

  1. Creating a Task Application

  2. Registering a Task Application

  3. Creating a Task Definition

  4. Launching a Task

  5. Reviewing Task Executions

  6. Destroying a Task Definition

26.1. Creating a Task Application

While Spring Cloud Task does provide a number of out of the box applications (via the spring-cloud-task-app-starters), most task applications will be custom developed. In order to create a custom task application:

  1. Create a new project via Spring Initializer via either the website or your IDE making sure to select the following starters:

    1. Cloud Task - This dependency is the spring-cloud-starter-task.

    2. JDBC - This is the dependency for the spring-jdbc starter.

  2. Within your new project, create a new class that will serve as your main class:

@EnableTask
@SpringBootApplication
public class MyTask {

    public static void main(String[] args) {
		SpringApplication.run(MyTask.class, args);
	}
}
  1. With this, you’ll need one or more CommandLineRunner or ApplicationRunner within your application. You can either implement your own or use the ones provided by Spring Boot (there is one for running batch jobs for example).

  2. Packaging your application up via Spring Boot into an über jar is done via the standard Boot conventions.

  3. The packaged application can be registered and deployed as noted below.

26.1.1. Task Database Configuration

When launching a task application be sure that the database driver that is being used by Spring Cloud Data Flow is also a dependency on the task application. For example if your Spring Cloud Data Flow is set to use Postgresql, be sure that the task application also has Postgresql as a dependency.

When executing tasks externally (i.e. command line) and you wish for Spring Cloud Data Flow to show the TaskExecutions in its UI, be sure that common datasource settings are shared among the both. By default Spring Cloud Task will use a local H2 instance and the execution will not be recorded to the database used by Spring Cloud Data Flow.

26.2. Registering a Task Application

Register a Task App with the App Registry using the Spring Cloud Data Flow Shell app register command. You must provide a unique name and a URI that can be resolved to the app artifact. For the type, specify "task". Here are a few examples:

dataflow:>app register --name task1 --type task --uri maven://com.example:mytask:1.0.2

dataflow:>app register --name task2 --type task --uri file:///Users/example/mytask-1.0.2.jar

dataflow:>app register --name task3 --type task --uri http://example.com/mytask-1.0.2.jar

When providing a URI with the maven scheme, the format should conform to the following:

maven://<groupId>:<artifactId>[:<extension>[:<classifier>]]:<version>

If you would like to register multiple apps at one time, you can store them in a properties file where the keys are formatted as <type>.<name> and the values are the URIs. For example, this would be a valid properties file:

task.foo=file:///tmp/foo.jar
task.bar=file:///tmp/bar.jar

Then use the app import command and provide the location of the properties file via --uri:

app import --uri file:///tmp/task-apps.properties

For convenience, we have the static files with application-URIs (for both maven and docker) available for all the out-of-the-box Task app-starters. You can point to this file and import all the application-URIs in bulk. Otherwise, as explained in previous paragraphs, you can register them individually or have your own custom property file with only the required application-URIs in it. It is recommended, however, to have a "focused" list of desired application-URIs in a custom property file.

List of available static property files:

Artifact Type Stable Release SNAPSHOT Release

Maven

http://bit.ly/Belmont-GA-task-applications-maven

http://bit.ly/Belmont-BUILD-SNAPSHOT-task-applications-maven

Docker

http://bit.ly/Belmont-GA-task-applications-docker

http://bit.ly/Belmont-BUILD-SNAPSHOT-task-applications-docker

For example, if you would like to register all out-of-the-box task applications in bulk, you can with the following command.

dataflow:>app import --uri http://bit.ly/Belmont-GA-task-applications-maven

You can also pass the --local option (which is TRUE by default) to indicate whether the properties file location should be resolved within the shell process itself. If the location should be resolved from the Data Flow Server process, specify --local false.

When using either app register or app import, if a task app is already registered with the provided name, it will not be overridden by default. If you would like to override the pre-existing task app, then include the --force option.

In some cases the Resource is resolved on the server side, whereas in others the URI will be passed to a runtime container instance where it is resolved. Consult the specific documentation of each Data Flow Server for more detail.

26.3. Creating a Task Definition

Create a Task Definition from a Task App by providing a definition name as well as properties that apply to the task execution. Creating a task definition can be done via the restful API or the shell. To create a task definition using the shell, use the task create command to create the task definition. For example:

dataflow:>task create mytask --definition "timestamp --format=\"yyyy\""
 Created new task 'mytask'

A listing of the current task definitions can be obtained via the restful API or the shell. To get the task definition list using the shell, use the task list command.

26.4. Launching a Task

An adhoc task can be launched via the restful API or via the shell. To launch an ad-hoc task via the shell use the task launch command. For example:

dataflow:>task launch mytask
 Launched task 'mytask'

When a task is launched, any properties that need to be passed as the command line arguments to the task application can be set when launching the task as follows:

dataflow:>task launch mytask --arguments "--server.port=8080,--foo=bar"

Additional properties meant for a TaskLauncher itself can be passed in using a --properties option. Format of this option is a comma delimited string of properties prefixed with app.<task definition name>.<property>. Properties are passed to TaskLauncher as application properties and it is up to an implementation to choose how those are passed into an actual task application. If the property is prefixed with deployer instead of app it is passed to TaskLauncher as a deployment property and its meaning may be TaskLauncher implementation specific.

dataflow:>task launch mytask --properties "deployer.timestamp.foo1=bar1,app.timestamp.foo2=bar2"

26.4.1. Common application properties

In addition to configuration via DSL, Spring Cloud Data Flow provides a mechanism for setting common properties to all the task applications that are launched by it. This can be done by adding properties prefixed with spring.cloud.dataflow.applicationProperties.task when starting the server. When doing so, the server will pass all the properties, without the prefix, to the instances it launches.

For example, all the launched applications can be configured to use the properties foo and fizz by launching the Data Flow server with the following options:

--spring.cloud.dataflow.applicationProperties.task.foo=bar
--spring.cloud.dataflow.applicationProperties.task.fizz=bar2

This will cause the properties foo=bar and fizz=bar2 to be passed to all the launched applications.

Properties configured using this mechanism have lower precedence than task deployment properties. They will be overridden if a property with the same key is specified at task launch time (e.g. app.trigger.fizz will override the common property).

26.5. Reviewing Task Executions

Once the task is launched the state of the task is stored in a relational DB. The state includes:

  • Task Name

  • Start Time

  • End Time

  • Exit Code

  • Exit Message

  • Last Updated Time

  • Parameters

A user can check the status of their task executions via the restful API or by the shell. To display the latest task executions via the shell use the task execution list command.

To get a list of task executions for just one task definition, add --name and the task definition name, for example task execution list --name foo. To retrieve full details for a task execution use the task display command with the id of the task execution, for example task display --id 549.

26.6. Destroying a Task Definition

Destroying a Task Definition will remove the definition from the definition repository. This can be done via the restful API or via the shell. To destroy a task via the shell use the task destroy command. For example:

dataflow:>task destroy mytask
 Destroyed task 'mytask'

The task execution information for previously launched tasks for the definition will remain in the task repository.

This will not stop any currently executing tasks for this definition, instead it just removes the task definition from the database.

27. Subscribing to Task/Batch Events

You can also tap into various task/batch events when the task is launched. If the task is enabled to generate task and/or batch events (with the additional dependencies spring-cloud-task-stream and spring-cloud-stream-binder-kafka, in the case of Kafka as the binder), those events are published during the task lifecycle. By default, the destination names for those published events on the broker (rabbit, kafka etc.,) are the event names themselves (for instance: task-events, job-execution-events etc.,).

dataflow:>task create myTask --definition “myBatchJob"
dataflow:>task launch myTask
dataflow:>stream create task-event-subscriber1 --definition ":task-events > log" --deploy

You can control the destination name for those events by specifying explicit names when launching the task such as:

dataflow:>task launch myTask --properties "spring.cloud.stream.bindings.task-events.destination=myTaskEvents"
dataflow:>stream create task-event-subscriber2 --definition ":myTaskEvents > log" --deploy

The default Task/Batch event and destination names on the broker are enumerated below:

Table 1. Task/Batch Event Destinations

Event

Destination

Task events

task-events

Job Execution events

job-execution-events

Step Execution events

step-execution-events

Item Read events

item-read-events

Item Process events

item-process-events

Item Write events

item-write-events

Skip events

skip-events

28. Launching Tasks from a Stream

You can launch a task from a stream by using one of the available task-launcher sinks. Currently the platforms supported via the task-launcher sinks are local, Cloud Foundry, and Yarn.

task-launcher-local is meant for development purposes only.

A task-launcher sink expects a message containing a TaskLaunchRequest object in its payload. From the TaskLaunchRequest object the task-launcher will obtain the URI of the artifact to be launched as well as the environment properties, command line arguments, deployment properties and application name to be used by the task.

The task-launcher-local can be added to the available sinks by executing the app register command as follows (for the Rabbit Binder):

app register --name task-launcher-local --type sink --uri maven://org.springframework.cloud.stream.app:task-launcher-local-sink-rabbit:jar:1.2.0.RELEASE

In the case of a maven based task that is to be launched, the task-launcher application is responsible for downloading the artifact. You must configure the task-launcher with the appropriate configuration of Maven Properties such as --maven.remote-repositories.repo1.url=http://repo.spring.io/libs-milestone" to resolve artifacts, in this case against a milestone repo. Note that this repo can be different than the one used to register the task-launcher application itself.

28.1. TriggerTask

One way to launch a task using the task-launcher is to use the triggertask source. The triggertask source will emit a message with a TaskLaunchRequest object containing the required launch information. The triggertask can be added to the available sources by executing the app register command as follows (for the Rabbit Binder):

app register --type source --name triggertask --uri maven://org.springframework.cloud.stream.app:triggertask-source-rabbit:1.2.0.RELEASE

An example of this would be to launch the timestamp task once every 60 seconds, the stream to implement this would look like:

stream create foo --definition "triggertask --triggertask.uri=maven://org.springframework.cloud.task.app:timestamp-task:jar:1.2.0.RELEASE --trigger.fixed-delay=60 --triggertask.environment-properties=spring.datasource.url=jdbc:h2:tcp://localhost:19092/mem:dataflow,spring.datasource.username=sa | task-launcher-local --maven.remote-repositories.repo1.url=http://repo.spring.io/libs-release" --deploy

If you execute runtime apps you can find the log file for the task launcher sink. Tailing that file you can find the log file for the launched tasks. The setting of triggertask.environment-properties is so that all the task executions can be collected in the same H2 database used in the local version of the Data Flow Server. You can then see the list of task executions using the shell command task execution list

dataflow:>task execution list
╔════════════════════╤══╤════════════════════════════╤════════════════════════════╤═════════╗
║     Task Name      │ID│         Start Time         │          End Time          │Exit Code║
╠════════════════════╪══╪════════════════════════════╪════════════════════════════╪═════════╣
║timestamp-task_26176│4 │Tue May 02 12:13:49 EDT 2017│Tue May 02 12:13:49 EDT 2017│0        ║
║timestamp-task_32996│3 │Tue May 02 12:12:49 EDT 2017│Tue May 02 12:12:49 EDT 2017│0        ║
║timestamp-task_58971│2 │Tue May 02 12:11:50 EDT 2017│Tue May 02 12:11:50 EDT 2017│0        ║
║timestamp-task_13467│1 │Tue May 02 12:10:50 EDT 2017│Tue May 02 12:10:50 EDT 2017│0        ║
╚════════════════════╧══╧════════════════════════════╧════════════════════════════╧═════════╝

28.2. TaskLaunchRequest-transform

Another option to start a task using the task-launcher would be to create a stream using the Tasklaunchrequest-transform processor to translate a message payload to a TaskLaunchRequest.

The tasklaunchrequest-transform can be added to the available processors by executing the app register command as follows (for the Rabbit Binder):

app register --type processor --name tasklaunchrequest-transform --uri maven://org.springframework.cloud.stream.app:tasklaunchrequest-transform-processor-rabbit:1.2.0.RELEASE

For example:

stream create task-stream --definition "http --port=9000 | tasklaunchrequest-transform --uri=maven://org.springframework.cloud.task.app:timestamp-task:jar:1.2.0.RELEASE | task-launcher-local --maven.remote-repositories.repo1.url=http://repo.spring.io/libs-release"

29. Composed Tasks

Spring Cloud Data Flow allows a user to create a directed graph where each node of the graph is a task application. This is done by using the DSL for composed tasks. A composed task can be created via the RESTful API, the Spring Cloud Data Flow Shell, or the Spring Cloud Data Flow UI.

29.1. Configuring the Composed Task Runner

Composed tasks are executed via a task application called the Composed Task Runner.

29.1.1. Registering the Composed Task Runner

Out of the box the Composed Task Runner application is not registered with Spring Cloud Data Flow. So, to launch composed tasks we must first register the Composed Task Runner as an application with Spring Cloud Data Flow as follows:

app register --name composed-task-runner --type task --uri maven://org.springframework.cloud.task.app:composedtaskrunner-task:<DESIRED_VERSION>

You can also configure Spring Cloud Data Flow to use a different task definition name for the composed task runner. This can be done by setting the spring.cloud.dataflow.task.composedTaskRunnerName property to the name of your choice. You can then register the composed task runner application with the name you set using that property.

29.1.2. Configuring the Composed Task Runner

The Composed Task Runner application has a dataflow.server.uri property that is used for validation and for launching child tasks. This defaults to localhost:9393. If you run a distributed Spring Cloud Data Flow server, like you would do if you deploy the server on Cloud Foundry, YARN or Kubernetes, then you need to provide the URI that can be used to access the server. You can either provide this dataflow.server.uri property for the Composed Task Runner application when launching a composed task, or you can provide a spring.cloud.dataflow.server.uri property for the Spring Cloud Data Flow server when it is started. For the latter case the dataflow.server.uri Composed Task Runner application property will be automatically set when a composed task is launched.

29.2. The Lifecycle of a Composed Task

29.2.1. Creating a Composed Task

The DSL for the composed tasks is used when creating a task definition via the task create command. For example:

dataflow:> app register --name timestamp --type task --uri maven://org.springframework.cloud.task.app:timestamp-task:<DESIRED_VERSION>
dataflow:> app register --name mytaskapp --type task --uri file:///home/tasks/mytask.jar
dataflow:> task create my-composed-task --definition "mytaskapp && timestamp"
dataflow:> task launch my-composed-task

In the example above we assume that the applications to be used by our composed task have not been registered yet. So the first two steps we register two task applications. We then create our composed task definition by using the task create command. The composed task DSL in the example above will, when launched, execute mytaskapp and then execute the timestamp application.

But before we launch the my-composed-task definition, we can view what Spring Cloud Data Flow generated for us. This can be done by executing the task list command.

dataflow:>task list
╔══════════════════════════╤══════════════════════╤═══════════╗
║        Task Name         │   Task Definition    │Task Status║
╠══════════════════════════╪══════════════════════╪═══════════╣
║my-composed-task          │mytaskapp && timestamp│unknown    ║
║my-composed-task-mytaskapp│mytaskapp             │unknown    ║
║my-composed-task-timestamp│timestamp             │unknown    ║
╚══════════════════════════╧══════════════════════╧═══════════╝

Spring Cloud Data Flow created three task definitions, one for each of the applications that comprises our composed task (my-composed-task-mytaskapp and my-composed-task-timestamp) as well as the composed task (my-composed-task) definition. We also see that each of the generated names for the child tasks is comprised of the name of the composed task and the name of the application separated by a dash -. i.e. my-composed-task - mytaskapp.

Task Application Parameters

The task applications that comprise the composed task definition can also contain parameters. For example:

dataflow:> task create my-composed-task --definition "mytaskapp --displayMessage=hello && timestamp --format=YYYY"

29.2.2. Launching a Composed Task

Launching a composed task is done the same way as launching a stand-alone task. i.e.

task launch my-composed-task

Once the task is launched and assuming all the tasks complete successfully you will see three task executions when executing a task execution list. For example:

dataflow:>task execution list
╔══════════════════════════╤═══╤════════════════════════════╤════════════════════════════╤═════════╗
║        Task Name         │ID │         Start Time         │          End Time          │Exit Code║
╠══════════════════════════╪═══╪════════════════════════════╪════════════════════════════╪═════════╣
║my-composed-task-timestamp│713│Wed Apr 12 16:43:07 EDT 2017│Wed Apr 12 16:43:07 EDT 2017│0        ║
║my-composed-task-mytaskapp│712│Wed Apr 12 16:42:57 EDT 2017│Wed Apr 12 16:42:57 EDT 2017│0        ║
║my-composed-task          │711│Wed Apr 12 16:42:55 EDT 2017│Wed Apr 12 16:43:15 EDT 2017│0        ║
╚══════════════════════════╧═══╧════════════════════════════╧════════════════════════════╧═════════╝

In the example above we see that my-compose-task launched and it also launched the other tasks in sequential order and all of them executed successfully with "Exit Code" as 0.

Exit Statuses

The following list shows how the Exit Status will be set for each step (task) contained in the composed task following each step execution.

  • If the TaskExecution has an ExitMessage that will be used as the ExitStatus

  • If no ExitMessage is present and the ExitCode is set to zero then the ExitStatus for the step will be COMPLETED.

  • If no ExitMessage is present and the ExitCode is set to any non zero number then the ExitStatus for the step will be FAILED.

29.2.3. Destroying a Composed Task

The same command used to destroy a stand-alone task is the same as destroying a composed task. The only difference is that destroying a composed task will also destroy the child tasks associated with it. For example

dataflow:>task list
╔══════════════════════════╤══════════════════════╤═══════════╗
║        Task Name         │   Task Definition    │Task Status║
╠══════════════════════════╪══════════════════════╪═══════════╣
║my-composed-task          │mytaskapp && timestamp│COMPLETED  ║
║my-composed-task-mytaskapp│mytaskapp             │COMPLETED  ║
║my-composed-task-timestamp│timestamp             │COMPLETED  ║
╚══════════════════════════╧══════════════════════╧═══════════╝
...
dataflow:>task destroy my-composed-task
dataflow:>task list
╔═════════╤═══════════════╤═══════════╗
║Task Name│Task Definition│Task Status║
╚═════════╧═══════════════╧═══════════╝

29.2.4. Stopping a Composed Task

In cases where a composed task execution needs to be stopped. This can be done via the:

  • RESTful API

  • Spring Cloud Data Flow Dashboard by selecting the Job’s tab and then clicking the stop button by the job execution that needs to be stopped.

The composed task run will be stopped when the currently running child task completes. The step associated with the child task that was running at the time that the composed task was stopped will be marked as STOPPED as well as the composed task job execution.

29.2.5. Restarting a Composed Task

In cases where a composed task fails during execution and the status of the composed task is FAILED then the task can be restarted. This can be done via the:

  • RESTful API

  • Shell by launching the task using the same parameters

  • Spring Cloud Data Flow Dashboard by selecting the Job’s tab and then clicking the restart button by the job execution that needs to be restarted.

Restarting a Composed Task job that has been stopped (via the Spring Cloud Data Flow Dashboard or RESTful API), will relaunch the STOPPED child task, and then launch the remaining (unlaunched) child tasks in the specified order.

30. Composed Tasks DSL

30.1. Conditional Execution

Conditional execution is expressed using a double ampersand symbol &&. This allows each task in the sequence to be launched only if the previous task successfully completed. For example:

task create my-composed-task --definition "foo && bar"

When the composed task my-composed-task is launched, it will launch the task foo and if it completes successfully, then the task bar will be launched. If the foo task fails, then the task bar will not launch.

You can also use the Spring Cloud Data Flow Dashboard to create your conditional execution. By using the designer to drag and drop applications that are required, and connecting them together to create your directed graph. For example:

Composed Task Conditional Execution
Figure 11. Conditional Execution

The diagram above is a screen capture of the directed graph as it being created using the Spring Cloud Data Flow Dashboard. We see that are 4 components in the diagram that comprise a conditional execution:

  • Start icon - All directed graphs start from this symbol. There will only be one.

  • Task icon - Represents each task in the directed graph.

  • End icon - Represents the termination of a directed graph.

  • Solid line arrow - Represents the flow conditional execution flow between:

    • Two applications

    • The start control node and an application

    • An application and the end control node

You can view a diagram of your directed graph by clicking the detail button next to the composed task definition on the definitions tab.

30.2. Transitional Execution

The DSL supports fine grained control over the transitions taken during the execution of the directed graph. Transitions are specified by providing a condition for equality based on the exit status of the previous task. A task transition is represented by the following symbol ->.

30.2.1. Basic Transition

A basic transition would look like the following:

task create my-transition-composed-task --definition "foo 'FAILED' -> bar 'COMPLETED' -> baz"

In the example above foo would launch and if it had an exit status of FAILED, then the bar task would launch. If the exit status of foo was COMPLETED then baz would launch. All other statuses returned by foo will have no effect and task would terminate normally.

Using the Spring Cloud Data Flow Dashboard to create the same "basic transition" would look like:

Composed Task Basic Transition
Figure 12. Basic Transition

The diagram above is a screen capture of the directed graph as it being created using the Spring Cloud Data Flow Dashboard. Notice that there are 2 different types of connectors:

  • Dashed line - Is the line used to represent transitions from the application to one of the possible destination applications.

  • Solid line - Used to connect applications in a conditional execution or a connection between the application and a control node (end, start).

When creating a transition, link the application to each of possible destination using the connector. Once complete go to each connection and select it by clicking it. A bolt icon should appear, click that icon and enter the exit status required for that connector. The solid line for that connector will turn to a dashed line.

30.2.2. Transition With a Wildcard

Wildcards are supported for transitions by the DSL for example:

task create my-transition-composed-task --definition "foo 'FAILED' -> bar '*' -> baz"

In the example above foo would launch and if it had an exit status of FAILED, then the bar task would launch. Any exit status of foo other than FAILED then baz would launch.

Using the Spring Cloud Data Flow Dashboard to create the same "transition with wildcard" would look like:

Composed Task Basic Transition with Wildcard
Figure 13. Basic Transition With Wildcard

30.2.3. Transition With a Following Conditional Execution

A transition can be followed by a conditional execution so long as the wildcard is not used. For example:

task create my-transition-conditional-execution-task --definition "foo 'FAILED' -> bar 'UNKNOWN' -> baz && qux && quux"

In the example above foo would launch and if it had an exit status of FAILED, then the bar task would launch. If foo had an exit status of UNKNOWN then baz would launch. Any exit status of foo other than FAILED or UNKNOWN then qux would launch and upon successful completion quux would launch.

Using the Spring Cloud Data Flow Dashboard to create the same "transition with conditional execution" would look like:

Composed Task Transition with Conditional Execution
Figure 14. Transition With Conditional Execution
In this diagram we see the dashed line (transition) connecting the foo application to the target applications, but a solid line connecting the conditional executions between foo, qux, and quux.

30.3. Split Execution

Splits allow for multiple tasks within a composed task to be run in parallel. It is denoted by using angle brackets <> to group tasks and flows that are to be run in parallel. These tasks and flows are separated by the double pipe || . For example:

task create my-split-task --definition "<foo || bar || baz>"

The example above will launch tasks foo, bar and baz in parallel.

Using the Spring Cloud Data Flow Dashboard to create the same "split execution" would look like:

Composed Task Split
Figure 15. Split

With the task DSL a user may also execute multiple split groups in succession. For example:

task create my-split-task --definition "<foo || bar || baz> && <qux || quux>"

In the example above tasks foo, bar and baz will be launched in parallel, once they all complete then tasks qux, quux will be launched in parallel. Once they complete the composed task will end. However if foo, bar, or baz fails then, the split containing qux and quux will not launch.

Using the Spring Cloud Data Flow Dashboard to create the same "split with multiple groups" would look like:

Composed Task Split
Figure 16. Split as a part of a conditional execution

Notice that there is a SYNC control node that is by the designer when connecting two consecutive splits.

30.3.1. Split Containing Conditional Execution

A split can also have a conditional execution within the angle brackets. For example:

task create my-split-task --definition "<foo && bar || baz>"

In the example above we see that foo and baz will be launched in parallel, however bar will not launch until foo completes successfully.

Using the Spring Cloud Data Flow Dashboard to create the same "split containing conditional execution" would look like:

Composed Task Split With Conditional Execution
Figure 17. Split with conditional execution

Dashboard

This section describe how to use the Dashboard of Spring Cloud Data Flow.

31. Introduction

Spring Cloud Data Flow provides a browser-based GUI and it currently includes 6 tabs:

  • Apps Lists all available applications and provides the control to register/unregister them

  • Runtime Provides the Data Flow cluster view with the list of all running applications

  • Streams List, create, deploy, and destroy Stream Definitions

  • Tasks List, create, launch and destroy Task Definitions

  • Jobs Perform Batch Job related functions

  • Analytics Create data visualizations for the various analytics applications

Upon starting Spring Cloud Data Flow, the Dashboard is available at:

http://<host>:<port>/dashboard

If you have enabled https, then it will be located at https://localhost:9393/dashboard. If you have enabled security, a login form is available at http://localhost:9393/dashboard/#/login.

The default Dashboard server port is 9393
The Spring Cloud Data Flow Dashboard
Figure 18. The Spring Cloud Data Flow Dashboard

32. Apps

The Apps section of the Dashboard lists all the available applications and provides the control to register/unregister them (if applicable). It is possible to import a number of applications at once using the Bulk Import Applications action.

List of available applications
Figure 19. List of Available Applications

32.1. Bulk Import of Applications

The bulk import applications page provides numerous options for defining and importing a set of applications in one go. For bulk import the application definitions are expected to be expressed in a properties style:

<type>.<name> = <coordinates>

For example:

task.timestamp=maven://org.springframework.cloud.task.app:timestamp-task:1.2.0.RELEASE

processor.transform=maven://org.springframework.cloud.stream.app:transform-processor-rabbit:1.2.0.RELEASE

At the top of the bulk import page an Uri can be specified that points to a properties file stored elsewhere, it should contain properties formatted as above. Alternatively, using the textbox labeled Apps as Properties it is possible to directly list each property string. Finally, if the properties are stored in a local file the Select Properties File option will open a local file browser to select the file. After setting your definitions via one of these routes, click Import.

At the bottom of the page there are quick links to the property files for common groups of stream apps and task apps. If those meet your needs, simply select your appropriate variant (rabbit, kafka, docker, etc) and click the Import action on those lines to immediately import all those applications.

Bulk Import Applications
Figure 20. Bulk Import Applications

33. Runtime

The Runtime section of the Dashboard application shows the Spring Cloud Data Flow cluster view with the list of all running applications. For each runtime app the state of the deployment and the number of deployed instances is shown. A list of the used deployment properties is available by clicking on the app id.

List of running applications
Figure 21. List of Running Applications

34. Streams

The Streams section of the Dashboard provides the Definitions tab that provides a listing of Stream definitions. There you have the option to deploy or undeploy those stream definitions. Additionally you can remove the definition by clicking on destroy. Each row includes an arrow on the left, which can be clicked to see a visual representation of the definition. Hovering over the boxes in the visual representation will show more details about the apps including any options passed to them. In this screenshot the timer stream has been expanded to show the visual representation:

List of Stream Definitions
Figure 22. List of Stream Definitions

If the details button is clicked the view will change to show a visual representation of that stream and also any related streams. In the above example, if clicking details for the timer stream, the view will change to the one shown below which clearly shows the relationship between the three streams (two of them are tapping into the timer stream).

Stream Details Page
Figure 23. Stream Details Page

35. Create Stream

The Create Stream section of the Dashboard includes the Spring Flo designer tab that provides the canvas application, offering a interactive graphical interface for creating data pipelines.

In this tab, you can:

  • Create, manage, and visualize stream pipelines using DSL, a graphical canvas, or both

  • Write pipelines via DSL with content-assist and auto-complete

  • Use auto-adjustment and grid-layout capabilities in the GUI for simpler and interactive organization of pipelines

Watch this screencast that highlights some of the "Flo for Spring Cloud Data Flow" capabilities. Spring Flo wiki includes more detailed content on core Flo capabilities.

Flo for Spring Cloud Data Flo
Figure 24. Flo for Spring Cloud Data Flow

36. Tasks

The Tasks section of the Dashboard currently has three tabs:

  • Apps

  • Definitions

  • Executions

36.1. Apps

Apps encapsulate a unit of work into a reusable component. Within the Data Flow runtime environment Apps allow users to create definitions for Streams as well as Tasks. Consequently, the Apps tab within the Tasks section allows users to create Task definitions.

You will also use this tab to create Batch Jobs.
List of Task Apps
Figure 25. List of Task Apps

On this screen you can perform the following actions:

  • View details such as the task app options.

  • Create a Task Definition from the respective App.

36.1.1. Create a Task Definition from a selected Task App

On this screen you can create a new Task Definition. As a minimum you must provide a name for the new definition. You will also have the option to specify various properties that are used during the deployment of the app.

Each parameter is only included if the Include checkbox is selected.

36.1.2. View Task App Details

On this page you can view the details of a selected task app, including the list of available options (properties) for that app.

36.2. Definitions

This page lists the Data Flow Task definitions and provides actions to launch or destroy those tasks. It also provides a shortcut operation to define one or more tasks using simple textual input, indicated by the bulk define tasks button.

List of Task Definitions
Figure 26. List of Task Definitions

36.2.1. Creating Task Definitions using the bulk define interface

After pressing bulk define tasks, the following screen will be shown.

Bulk Define Tasks
Figure 27. Bulk Define Tasks

It includes a textbox where one or more definitions can be entered and then various actions performed on those definitions. The required input text format for task definitions is very basic, each line should be of the form:

<task-definition-name> = <task-application> <options>

For example:

demo-timestamp = timestamp --format=hhmmss

After entering any data a validator will run asynchronously to verify both the syntax and that the application name entered is a valid application and it supports the options specified. If validation fails the editor will show the errors with more information via tooltips.

To make it easier to enter definitions into the text area, content assist is supported. Pressing Ctrl+Space will invoke content assist to suggest simple task names (based on the line on which it is invoked), task applications and task application options. Press ESCape to close the content assist window without taking a selection.

If the validator should not verify the applications or the options (for example if specifying non-whitelisted options to the applications) then turn off that part of validation by toggling the checkbox off on the Verify Apps button - the validator will then only perform syntax checking. When correctly validated, the create button will be clickable and on pressing it the UI will proceed to create each task definition. If there are any errors during creation then after creation finishes the editor will show any lines of input, as it cannot be used in task definitions. These can then be fixed up and creation repeated. There is an import file button to open a file browser on the local file system if the definitions are in a file and it is easier to import than copy/paste.

Bulk loading of composed task definitions is not currently supported.

36.2.2. Creating Composed Task Definitions

The dashboard includes the Create Composed Task tab that provides the canvas application, offering a interactive graphical interface for creating composed tasks.

In this tab, you can:

  • Create and visualize composed tasks using DSL, a graphical canvas, or both

  • Use auto-adjustment and grid-layout capabilities in the GUI for simpler and interactive organization of the composed task

Composed Task Designer
Figure 28. Composed Task Designer

36.2.3. Launching Tasks

Once the task definition is created, they can be launched through the Dashboard as well. Navigate to the Definitions tab. Select the Task you want to launch by pressing Launch.

On the following screen, you can define one or more Task parameters by entering:

  • Parameter Key

  • Parameter Value

Task parameters are not typed.

36.3. Executions

List of Task Executions
Figure 29. List of Task Executions

37. Jobs

The Jobs section of the Dashboard allows you to inspect Batch Jobs. The main section of the screen provides a list of Job Executions. Batch Jobs are Tasks that were executing one or more Batch Job. As such each Job Execution has a back reference to the Task Execution Id (Task Id).

In case of a failed job, you can also restart the task. When dealing with long-running Batch Jobs, you can also request to stop it.

List of Job Executions
Figure 30. List of Job Executions

37.1. List job executions

This page lists the Batch Job Executions and provides the option to restart or stop a specific job execution, provided the operation is available. Furthermore, you have the option to view the Job execution details.

The list of Job Executions also shows the state of the underlying Job Definition. Thus, if the underlying definition has been deleted, deleted will be shown.

37.1.1. Job execution details

Job Execution Details
Figure 31. Job Execution Details

The Job Execution Details screen also contains a list of the executed steps. You can further drill into the Step Execution Details by clicking onto the magnifying glass.

37.1.2. Step execution details

On the top of the page, you will see progress indicator the respective step, with the option to refresh the indicator. Furthermore, a link is provided to view the step execution history.

The Step Execution details screen provides a complete list of all Step Execution Context key/value pairs.

In case of exceptions, the Exit Description field will contain additional error information. Please be aware, though, that this field can only have a maximum of 2500 characters. Therefore, in case of long exception stacktraces, trimming of error messages may occur. In that case, please refer to the server log files for further details.

37.1.3. Step Execution Progress

On this screen, you can see a progress bar indicator in regards to the execution of the current step. Under the Step Execution History, you can also view various metrics associated with the selected step such as duration, read counts, write counts etc.

Step Execution History
Figure 32. Step Execution History

38. Analytics

The Analytics section of the Dashboard provided data visualization capabilities for the various analytics applications available in Spring Cloud Data Flow:

  • Counters

  • Field-Value Counters

  • Aggregate Counters

For example, if you create a stream with a Counter application, you can now easily create the corresponding graph from within the Dashboard tab:

  1. Under Metric Type, select Counters from the select box

  2. Under Stream, select tweetcount

  3. Under Visualization, select the desired chart option, Bar Chart

Using the icons to the right, you can add additional charts to the Dashboard, re-arange the order of created dashboards or remove data visualizations.

REST API Guide

In this section you will learn all about the Spring Cloud Data Flow REST API.

39. Overview

Spring Cloud Data Flow provides a REST API allowing you to access all aspects of the server. In fact the Spring Cloud Data Flow Shell is a first-class consumer of that API.

If you plan on using the REST API using Java, please also consider using the provided Java client (DataflowTemplate) that uses the REST API internally.

39.1. HTTP verbs

Spring Cloud Data Flow tries to adhere as closely as possible to standard HTTP and REST conventions in its use of HTTP verbs.

Verb Usage

GET

Used to retrieve a resource

POST

Used to create a new resource

PUT

Used to update an existing resource, including partial updates. Also used for resources that imply the concept of restarts such as Tasks.

DELETE

Used to delete an existing resource

39.2. HTTP status codes

RESTful note tries to adhere as closely as possible to standard HTTP and REST conventions in its use of HTTP status codes.

Status code Usage

200 OK

The request completed successfully

201 Created

A new resource has been created successfully. The resource’s URI is available from the response’s Location header

204 No Content

An update to an existing resource has been applied successfully

400 Bad Request

The request was malformed. The response body will include an error providing further information

404 Not Found

The requested resource did not exist

409 Conflict

The requested resource already exists, e.g. the task already exists or the stream was already being deployed

422 Unprocessable Entity

Returned in cases the Job Execution cannot be stopped or restarted

39.3. Headers

Every response has the following header(s):

Name Description

Content-Type

The Content-Type of the payload, e.g. application/hal+json

39.4. Errors

Path Type Description

error

String

The HTTP error that occurred, e.g. Bad Request

message

String

A description of the cause of the error

path

String

The path to which the request was made

status

Number

The HTTP status code, e.g. 400

timestamp

String

The time, in milliseconds, at which the error occurred

39.5. Hypermedia

Spring Cloud Data Flow uses hypermedia and resources include links to other resources in their responses. Responses are in Hypertext Application from resource to resource Language (HAL) format. Links can be found beneath the _links key. Users of the API should not create URIs themselves, instead they should use the above-described links to navigate.

40. Resources

40.1. Index

The index provides the entry point into Spring Cloud Data Flow’s REST API.

40.1.1. Accessing the index

A GET request is used to access the index

Request structure
GET / HTTP/1.1
Host: localhost:9393
Example request
$ curl 'http://localhost:9393/' -i
Response structure
Path Type Description

_links

Object

Links to other resources

['api.revision']

Number

Incremented each time a change is implemented in this REST API

Example response
HTTP/1.1 200 OK
Content-Type: application/hal+json;charset=UTF-8
Content-Length: 4030

{
  "_links" : {
    "dashboard" : {
      "href" : "http://localhost:9393/dashboard"
    },
    "streams/definitions" : {
      "href" : "http://localhost:9393/streams/definitions"
    },
    "streams/definitions/definition" : {
      "href" : "http://localhost:9393/streams/definitions/{name}",
      "templated" : true
    },
    "streams/deployments" : {
      "href" : "http://localhost:9393/streams/deployments"
    },
    "streams/deployments/deployment" : {
      "href" : "http://localhost:9393/streams/deployments/{name}",
      "templated" : true
    },
    "runtime/apps" : {
      "href" : "http://localhost:9393/runtime/apps"
    },
    "runtime/apps/app" : {
      "href" : "http://localhost:9393/runtime/apps/{appId}",
      "templated" : true
    },
    "runtime/apps/instances" : {
      "href" : "http://localhost:9393/runtime/apps/interface%20org.springframework.web.util.UriComponents%24UriTemplateVariables/instances"
    },
    "metrics/streams" : {
      "href" : "http://localhost:9393/metrics/streams"
    },
    "tasks/definitions" : {
      "href" : "http://localhost:9393/tasks/definitions"
    },
    "tasks/definitions/definition" : {
      "href" : "http://localhost:9393/tasks/definitions/{name}",
      "templated" : true
    },
    "tasks/executions" : {
      "href" : "http://localhost:9393/tasks/executions"
    },
    "tasks/executions/name" : {
      "href" : "http://localhost:9393/tasks/executions{?name}",
      "templated" : true
    },
    "tasks/executions/execution" : {
      "href" : "http://localhost:9393/tasks/executions/{id}",
      "templated" : true
    },
    "jobs/executions" : {
      "href" : "http://localhost:9393/jobs/executions"
    },
    "jobs/executions/name" : {
      "href" : "http://localhost:9393/jobs/executions{?name}",
      "templated" : true
    },
    "jobs/executions/execution" : {
      "href" : "http://localhost:9393/jobs/executions/{id}",
      "templated" : true
    },
    "jobs/executions/execution/steps" : {
      "href" : "http://localhost:9393/jobs/executions/{jobExecutionId}/steps",
      "templated" : true
    },
    "jobs/executions/execution/steps/step" : {
      "href" : "http://localhost:9393/jobs/executions/{jobExecutionId}/steps/{stepId}",
      "templated" : true
    },
    "jobs/executions/execution/steps/step/progress" : {
      "href" : "http://localhost:9393/jobs/executions/{jobExecutionId}/steps/{stepId}/progress",
      "templated" : true
    },
    "jobs/instances/name" : {
      "href" : "http://localhost:9393/jobs/instances{?name}",
      "templated" : true
    },
    "jobs/instances/instance" : {
      "href" : "http://localhost:9393/jobs/instances/{id}",
      "templated" : true
    },
    "tools/parseTaskTextToGraph" : {
      "href" : "http://localhost:9393/tools"
    },
    "tools/convertTaskGraphToText" : {
      "href" : "http://localhost:9393/tools"
    },
    "counters" : {
      "href" : "http://localhost:9393/metrics/counters"
    },
    "counters/counter" : {
      "href" : "http://localhost:9393/metrics/counters/{name}",
      "templated" : true
    },
    "field-value-counters" : {
      "href" : "http://localhost:9393/metrics/field-value-counters"
    },
    "field-value-counters/counter" : {
      "href" : "http://localhost:9393/metrics/field-value-counters/{name}",
      "templated" : true
    },
    "aggregate-counters" : {
      "href" : "http://localhost:9393/metrics/aggregate-counters"
    },
    "aggregate-counters/counter" : {
      "href" : "http://localhost:9393/metrics/aggregate-counters/{name}",
      "templated" : true
    },
    "apps" : {
      "href" : "http://localhost:9393/apps"
    },
    "about" : {
      "href" : "http://localhost:9393/about"
    },
    "completions/stream" : {
      "href" : "http://localhost:9393/completions/stream{?start,detailLevel}",
      "templated" : true
    },
    "completions/task" : {
      "href" : "http://localhost:9393/completions/task{?start,detailLevel}",
      "templated" : true
    }
  },
  "api.revision" : 14
}

The main element of the index are the links as they allow you to traverse the API and execute the desired functionality:

Relation Description

about

Access meta information, including enabled features, security info, version information

dashboard

Access the dashboard UI

apps

Handle registered applications

completions/stream

Exposes the DSL completion features for Stream

completions/task

Exposes the DSL completion features for Task

metrics/streams

Exposes metrics for the stream applications

jobs/executions

Provides the JobExecution resource

jobs/executions/execution

Provides details for a specific JobExecution

jobs/executions/execution/steps

Provides the steps for a JobExecution

jobs/executions/execution/steps/step

Returns the details for a specific step

jobs/executions/execution/steps/step/progress

Provides progress information for a specific step

jobs/executions/name

Retrieve Job Executions by Job name

jobs/instances/instance

Provides the job instance resource for a specific job instance

jobs/instances/name

Provides the Job instance resource for a specific job name

runtime/apps

Provides the runtime application resource

runtime/apps/app

Exposes the runtime status for a specific app

runtime/apps/instances

Provides the status for app instances

tasks/definitions

Provides the task definition resource

tasks/definitions/definition

Provides details for a specific task definition

tasks/executions

Returns Task executions and allows lanching of tasks

tasks/executions/name

Returns all task executions for a given Task name

tasks/executions/execution

Provides details for a specific task execution

streams/definitions

Exposes the Streams resource

streams/definitions/definition

Handle a specific Stream definition

streams/deployments

Provides Stream deployment operations

streams/deployments/deployment

Request (un-)deployment of an existing stream definition

counters

Exposes the resource for dealing with Counters

counters/counter

Handle a specific counter

aggregate-counters

Provides the resource for dealing with aggregate counters

aggregate-counters/counter

Handle a specific aggregate counter

field-value-counters

Provides the resource for dealing with field-value-counters

field-value-counters/counter

Handle a specific field-value-counter

tools/parseTaskTextToGraph

Parse a task definition into a graph structure

tools/convertTaskGraphToText

Convert a graph format into DSL text format

40.2. Server Meta Information

40.2.1. Retrieving information about the server

A GET request will return meta information for Spring Cloud Data Flow. This includes:

  • Runtime Environment Information

  • Information regarding which features are enabled

  • Dependency information of Spring Cloud Data Flow Server

  • Security information

Request structure
GET /about HTTP/1.1
Accept: application/json
Host: localhost:9393
Example request
$ curl 'http://localhost:9393/about' -i -H 'Accept: application/json'
Response structure
HTTP/1.1 200 OK
Content-Type: application/json;charset=UTF-8
Content-Length: 1808

{
  "featureInfo" : {
    "analyticsEnabled" : true,
    "streamsEnabled" : true,
    "tasksEnabled" : true
  },
  "versionInfo" : {
    "implementation" : {
      "name" : "spring-cloud-starter-dataflow-server-local",
      "version" : "1.3.0.M1"
    },
    "core" : {
      "name" : "Spring Cloud Data Flow Core",
      "version" : "1.3.0.M1"
    },
    "dashboard" : {
      "name" : "Spring Cloud Dataflow UI",
      "version" : "1.3.0.M1"
    }
  },
  "securityInfo" : {
    "authenticationEnabled" : false,
    "authorizationEnabled" : false,
    "formLogin" : false,
    "authenticated" : false,
    "username" : null,
    "roles" : [ ]
  },
  "runtimeEnvironment" : {
    "appDeployer" : {
      "deployerImplementationVersion" : "1.2.2.RELEASE",
      "deployerName" : "LocalAppDeployer",
      "deployerSpiVersion" : "1.2.2.RELEASE",
      "javaVersion" : "1.8.0_121",
      "platformApiVersion" : "Linux 4.4.0-87-generic",
      "platformClientVersion" : "4.4.0-87-generic",
      "platformHostVersion" : "4.4.0-87-generic",
      "platformSpecificInfo" : { },
      "platformType" : "Local",
      "springBootVersion" : "1.5.4.RELEASE",
      "springVersion" : "4.3.9.RELEASE"
    },
    "taskLauncher" : {
      "deployerImplementationVersion" : "1.2.2.RELEASE",
      "deployerName" : "LocalTaskLauncher",
      "deployerSpiVersion" : "1.2.2.RELEASE",
      "javaVersion" : "1.8.0_121",
      "platformApiVersion" : "Linux 4.4.0-87-generic",
      "platformClientVersion" : "4.4.0-87-generic",
      "platformHostVersion" : "4.4.0-87-generic",
      "platformSpecificInfo" : { },
      "platformType" : "Local",
      "springBootVersion" : "1.5.4.RELEASE",
      "springVersion" : "4.3.9.RELEASE"
    }
  },
  "_links" : {
    "self" : {
      "href" : "http://localhost:9393/about"
    }
  }
}

40.3. Registered Applications

40.3.1. Listing Applications

A GET request will list all applications known to Spring Cloud Data Flow.

Request structure
GET /apps?type=source HTTP/1.1
Accept: application/json
Host: localhost:9393
Request parameters
Parameter Description

type

Restrict the returned apps to the type of the app. One of [source, processor, sink, task]

Example request
$ curl 'http://localhost:9393/apps?type=source' -i -H 'Accept: application/json'
Response structure
HTTP/1.1 200 OK
Content-Type: application/json;charset=UTF-8
Content-Length: 799

{
  "_embedded" : {
    "appRegistrationResourceList" : [ {
      "name" : "http",
      "type" : "source",
      "uri" : "maven://org.springframework.cloud.stream.app:http-source-rabbit:1.1.0.RELEASE",
      "_links" : {
        "self" : {
          "href" : "http://localhost:9393/apps/source/http"
        }
      }
    }, {
      "name" : "time",
      "type" : "source",
      "uri" : "maven://org.springframework.cloud.stream.app:time-source-rabbit:1.1.0.RELEASE",
      "_links" : {
        "self" : {
          "href" : "http://localhost:9393/apps/source/time"
        }
      }
    } ]
  },
  "_links" : {
    "self" : {
      "href" : "http://localhost:9393/apps?page=0&size=20"
    }
  },
  "page" : {
    "size" : 20,
    "totalElements" : 2,
    "totalPages" : 1,
    "number" : 0
  }
}

40.3.2. Getting Information on a partical Application

A GET request on /apps/<type>/<name> will get info on a particular application.

Request structure
GET /apps/source/http HTTP/1.1
Accept: application/json
Host: localhost:9393
Path parameters
Table 2. /apps/{type}/{name}
Parameter Description

type

The type of application to query. One of [source, processor, sink, task]

name

The name of the application to query

Example request
$ curl 'http://localhost:9393/apps/source/http' -i -H 'Accept: application/json'
Response structure
HTTP/1.1 200 OK
Content-Type: application/json;charset=UTF-8
Content-Length: 1232

{
  "name" : "http",
  "type" : "source",
  "uri" : "maven://org.springframework.cloud.stream.app:http-source-rabbit:1.1.0.RELEASE",
  "options" : [ {
    "id" : "http.path-pattern",
    "name" : "http.path-pattern",
    "type" : "java.lang.String",
    "description" : "An Ant-Style pattern to determine which http requests will be captured.",
    "shortDescription" : "An Ant-Style pattern to determine which http requests will be captured.",
    "defaultValue" : "/",
    "hints" : {
      "keyHints" : [ ],
      "keyProviders" : [ ],
      "valueHints" : [ ],
      "valueProviders" : [ ]
    },
    "deprecation" : null,
    "sourceType" : null,
    "sourceMethod" : null,
    "deprecated" : false
  }, {
    "id" : "server.port",
    "name" : "port",
    "type" : "java.lang.Integer",
    "description" : "Server HTTP port.",
    "shortDescription" : "Server HTTP port.",
    "defaultValue" : null,
    "hints" : {
      "keyHints" : [ ],
      "keyProviders" : [ ],
      "valueHints" : [ ],
      "valueProviders" : [ ]
    },
    "deprecation" : null,
    "sourceType" : "org.springframework.boot.autoconfigure.web.ServerProperties",
    "sourceMethod" : null,
    "deprecated" : false
  } ],
  "shortDescription" : null
}

40.3.3. Registering a New Application

A POST request on /apps/<type>/<name> will allow registration of a new application.

Request structure
POST /apps/source/http HTTP/1.1
Host: localhost:9393
Content-Type: application/x-www-form-urlencoded

uri=maven%3A%2F%2Forg.springframework.cloud.stream.app%3Ahttp-source-rabbit%3A1.1.0.RELEASE
Request parameters
Parameter Description

uri

URI where the application bits reside

metadata-uri

URI where the application metadata jar can be found

force

Must be true if a registration with the same name and type already exists, otherwise an error will occur

Path parameters
Table 3. /apps/{type}/{name}
Parameter Description

type

The type of application to register. One of [source, processor, sink, task]

name

The name of the application to register

Example request
$ curl 'http://localhost:9393/apps/source/http' -i -X POST -d 'uri=maven%3A%2F%2Forg.springframework.cloud.stream.app%3Ahttp-source-rabbit%3A1.1.0.RELEASE'
Response structure
HTTP/1.1 201 Created

40.3.4. Unregistering an Application

A DELETE request on /apps/<type>/<name> will unregister a previously registered application.

Request structure
DELETE /apps/source/http HTTP/1.1
Host: localhost:9393
Path parameters
Table 4. /apps/{type}/{name}
Parameter Description

type

The type of application to unregister. One of [source, processor, sink, task]

name

The name of the application to unregister

Example request
$ curl 'http://localhost:9393/apps/source/http' -i -X DELETE
Response structure
HTTP/1.1 200 OK

40.3.5. Registering Applications in Bulk

A POST request on /apps allows registering multiple applications at once.

Request structure
POST /apps HTTP/1.1
Host: localhost:9393
Content-Type: application/x-www-form-urlencoded

apps=source.http%3Dmaven%3A%2F%2Forg.springframework.cloud.stream.app%3Ahttp-source-rabbit%3A1.1.0.RELEASE&force=false
Request parameters
Parameter Description

uri

URI where a properties file containing registrations can be fetched. Exclusive with apps.

apps

Inline set of registrations. Exclusive with uri.

force

Must be true if a registration with the same name and type already exists, otherwise an error will occur

Example request
$ curl 'http://localhost:9393/apps' -i -X POST -d 'apps=source.http%3Dmaven%3A%2F%2Forg.springframework.cloud.stream.app%3Ahttp-source-rabbit%3A1.1.0.RELEASE&force=false'
Response structure
HTTP/1.1 201 Created
Content-Type: application/hal+json;charset=UTF-8
Content-Length: 531

{
  "_embedded" : {
    "appRegistrationResourceList" : [ {
      "name" : "http",
      "type" : "source",
      "uri" : "maven://org.springframework.cloud.stream.app:http-source-rabbit:1.1.0.RELEASE",
      "_links" : {
        "self" : {
          "href" : "http://localhost:9393/apps/source/http"
        }
      }
    } ]
  },
  "_links" : {
    "self" : {
      "href" : "http://localhost:9393/apps?page=0&size=20"
    }
  },
  "page" : {
    "size" : 20,
    "totalElements" : 1,
    "totalPages" : 1,
    "number" : 0
  }
}

40.4. Stream Definitions

40.4.1. Creating a new Stream Definition

Creating a stream definition is achieved by POSTing to the stream definitions endpoint. A simple curl request for a ticktock stream may look like:

curl -X POST -d "name=ticktock&definition=time | log" localhost:9393/streams/definitions?deploy=false

A stream definition you create may also contain additional parameters. For instance, in the following example we also provide the date-time format.

Request structure
POST /streams/definitions HTTP/1.1
Host: localhost:9393
Content-Type: application/x-www-form-urlencoded

name=timelog&definition=time+--format%3D%27YYYY+MM+DD%27+%7C+log&deploy=false
Request parameters
Parameter Description

name

The name for the created task definitions

definition

The definition for the stream, using Data Flow DSL

deploy

If true, the stream is deployed upon creation (default is false

Example request
$ curl 'http://localhost:9393/streams/definitions' -i -X POST -d 'name=timelog&definition=time+--format%3D%27YYYY+MM+DD%27+%7C+log&deploy=false'
Response structure
HTTP/1.1 201 Created
Content-Type: application/hal+json;charset=UTF-8
Content-Length: 307

{
  "name" : "timelog",
  "dslText" : "time --format='YYYY MM DD' | log",
  "status" : "undeployed",
  "statusDescription" : "The app or group is known to the system, but is not currently deployed",
  "_links" : {
    "self" : {
      "href" : "http://localhost:9393/streams/definitions/timelog"
    }
  }
}

40.4.2. List all Stream Definitions

Request structure
GET /streams/definitions?page=0&size=10 HTTP/1.1
Host: localhost:9393
Request parameters
Parameter Description

page

The zero-based page number (optional)

size

The requested page size (optional)

Example request
$ curl 'http://localhost:9393/streams/definitions?page=0&size=10' -i
Response structure
HTTP/1.1 200 OK
Content-Type: application/hal+json;charset=UTF-8
Content-Length: 628

{
  "_embedded" : {
    "streamDefinitionResourceList" : [ {
      "name" : "timelog",
      "dslText" : "time --format='YYYY MM DD' | log",
      "status" : "undeployed",
      "statusDescription" : "The app or group is known to the system, but is not currently deployed",
      "_links" : {
        "self" : {
          "href" : "http://localhost:9393/streams/definitions/timelog"
        }
      }
    } ]
  },
  "_links" : {
    "self" : {
      "href" : "http://localhost:9393/streams/definitions?page=0&size=10"
    }
  },
  "page" : {
    "size" : 10,
    "totalElements" : 1,
    "totalPages" : 1,
    "number" : 0
  }
}
Request structure
GET /streams/definitions/timelog/related?nested=true HTTP/1.1
Host: localhost:9393
Request parameters
Parameter Description

nested

Should we recursively search for related stream definitions (optional)

Example request
$ curl 'http://localhost:9393/streams/definitions/timelog/related?nested=true' -i
Response structure
HTTP/1.1 200 OK
Content-Type: application/hal+json;charset=UTF-8
Content-Length: 644

{
  "_embedded" : {
    "streamDefinitionResourceList" : [ {
      "name" : "timelog",
      "dslText" : "time --format='YYYY MM DD' | log",
      "status" : "undeployed",
      "statusDescription" : "The app or group is known to the system, but is not currently deployed",
      "_links" : {
        "self" : {
          "href" : "http://localhost:9393/streams/definitions/timelog"
        }
      }
    } ]
  },
  "_links" : {
    "self" : {
      "href" : "http://localhost:9393/streams/definitions/timelog/related?page=0&size=20"
    }
  },
  "page" : {
    "size" : 20,
    "totalElements" : 1,
    "totalPages" : 1,
    "number" : 0
  }
}

40.4.4. Delete a single Stream Definition

Request structure
DELETE /streams/definitions/timelog HTTP/1.1
Host: localhost:9393
Request parameters

There are no request parameter for this endpoint.

Example request
$ curl 'http://localhost:9393/streams/definitions/timelog' -i -X DELETE
Response structure
HTTP/1.1 200 OK

40.4.5. Delete all Stream Definitions

Request structure
DELETE /streams/definitions HTTP/1.1
Host: localhost:9393
Request parameters

There are no request parameter for this endpoint.

Example request
$ curl 'http://localhost:9393/streams/definitions' -i -X DELETE
Response structure
HTTP/1.1 200 OK

40.5. Stream Deployments

40.5.1. Example "stream deploy" request for a ticktock stream

curl -X POST http://localhost:9393/streams/deployments/ticktock

40.6. Task Definitions

40.6.1. Creating a new Task Definition

Creating a task definition is achieved by POSTing to the task definitions endpoint.

Request structure
POST /tasks/definitions HTTP/1.1
Host: localhost:9393
Content-Type: application/x-www-form-urlencoded

name=my-task&definition=timestamp+--format%3D%27YYYY+MM+DD%27
Request parameters
Parameter Description

name

The name for the created task definition

definition

The definition for the task, using Data Flow DSL

Example request
$ curl 'http://localhost:9393/tasks/definitions' -i -X POST -d 'name=my-task&definition=timestamp+--format%3D%27YYYY+MM+DD%27'
Response structure
HTTP/1.1 200 OK
Content-Type: application/hal+json;charset=UTF-8
Content-Length: 225

{
  "name" : "my-task",
  "dslText" : "timestamp --format='YYYY MM DD'",
  "composed" : false,
  "status" : "unknown",
  "_links" : {
    "self" : {
      "href" : "http://localhost:9393/tasks/definitions/my-task"
    }
  }
}

40.6.2. List all Task Definitions

Request structure
GET /tasks/definitions?page=0&size=10 HTTP/1.1
Host: localhost:9393
Request parameters
Parameter Description

page

The zero-based page number (optional)

size

The requested page size (optional)

Example request
$ curl 'http://localhost:9393/tasks/definitions?page=0&size=10' -i
Response structure
HTTP/1.1 200 OK
Content-Type: application/hal+json;charset=UTF-8
Content-Length: 542

{
  "_embedded" : {
    "taskDefinitionResourceList" : [ {
      "name" : "my-task",
      "dslText" : "timestamp --format='YYYY MM DD'",
      "composed" : false,
      "status" : "unknown",
      "_links" : {
        "self" : {
          "href" : "http://localhost:9393/tasks/definitions/my-task"
        }
      }
    } ]
  },
  "_links" : {
    "self" : {
      "href" : "http://localhost:9393/tasks/definitions?page=0&size=10"
    }
  },
  "page" : {
    "size" : 10,
    "totalElements" : 1,
    "totalPages" : 1,
    "number" : 0
  }
}

40.6.3. Retrieve Task Definition Detail

Request structure
GET /tasks/definitions/my-task HTTP/1.1
Host: localhost:9393
Table 5. /tasks/definitions/{my-task}
Parameter Description

my-task

The name of an existing task definition (required)

Request parameters

There are no request parameter for this endpoint.

Example request
$ curl 'http://localhost:9393/tasks/definitions/my-task' -i
Response structure
HTTP/1.1 200 OK
Content-Type: application/hal+json;charset=UTF-8
Content-Length: 225

{
  "name" : "my-task",
  "dslText" : "timestamp --format='YYYY MM DD'",
  "composed" : false,
  "status" : "unknown",
  "_links" : {
    "self" : {
      "href" : "http://localhost:9393/tasks/definitions/my-task"
    }
  }
}

40.6.4. Delete Task Definition

Request structure
DELETE /tasks/definitions/my-task HTTP/1.1
Host: localhost:9393
Table 6. /tasks/definitions/{my-task}
Parameter Description

my-task

The name of an existing task definition (required)

Request parameters

There are no request parameter for this endpoint.

Example request
$ curl 'http://localhost:9393/tasks/definitions/my-task' -i -X DELETE
Response structure
HTTP/1.1 200 OK

40.7. Task Executions

40.7.1. Launching a Task

Launching a task is done by requesting the creation of a new Task Execution.

Request structure
POST /tasks/executions HTTP/1.1
Host: localhost:9393
Content-Type: application/x-www-form-urlencoded

name=taskA&properties=app.my-task.foo%3Dbar%2Cdeployer.my-task.something-else%3D3&arguments=--server.port%3D8080%2C--foo%3Dbar
Request parameters
Parameter Description

name

The name of the task definition to launch

properties

Application and Deployer properties to use while launching

arguments

Command line arguments to pass to the task

Example request
$ curl 'http://localhost:9393/tasks/executions' -i -X POST -d 'name=taskA&properties=app.my-task.foo%3Dbar%2Cdeployer.my-task.something-else%3D3&arguments=--server.port%3D8080%2C--foo%3Dbar'
Response structure
HTTP/1.1 201 Created
Content-Type: application/json;charset=UTF-8
Content-Length: 1

1

40.7.2. List All Task Executions

Request structure
GET /tasks/executions?page=0&size=10 HTTP/1.1
Host: localhost:9393
Request parameters
Parameter Description

page

The zero-based page number (optional)

size

The requested page size (optional)

Example request
$ curl 'http://localhost:9393/tasks/executions?page=0&size=10' -i
Response structure
HTTP/1.1 200 OK
Content-Type: application/hal+json;charset=UTF-8
Content-Length: 1155

{
  "_embedded" : {
    "taskExecutionResourceList" : [ {
      "executionId" : 2,
      "exitCode" : 0,
      "taskName" : "taskB",
      "startTime" : null,
      "endTime" : null,
      "exitMessage" : null,
      "arguments" : [ ],
      "jobExecutionIds" : [ ],
      "errorMessage" : null,
      "externalExecutionId" : "taskB-33b7a300-bdd3-4eb9-bb6d-a9491c775ef0",
      "_links" : {
        "self" : {
          "href" : "http://localhost:9393/tasks/executions/2"
        }
      }
    }, {
      "executionId" : 1,
      "exitCode" : 0,
      "taskName" : "taskA",
      "startTime" : null,
      "endTime" : null,
      "exitMessage" : null,
      "arguments" : [ ],
      "jobExecutionIds" : [ ],
      "errorMessage" : null,
      "externalExecutionId" : "taskA-6fd01784-9f90-4d7c-bfdc-22f86f0ceb9e",
      "_links" : {
        "self" : {
          "href" : "http://localhost:9393/tasks/executions/1"
        }
      }
    } ]
  },
  "_links" : {
    "self" : {
      "href" : "http://localhost:9393/tasks/executions?page=0&size=10"
    }
  },
  "page" : {
    "size" : 10,
    "totalElements" : 2,
    "totalPages" : 1,
    "number" : 0
  }
}

40.7.3. List All Task Executions With a Specified Task Name

Request structure
GET /tasks/executions?name=taskB&page=0&size=10 HTTP/1.1
Host: localhost:9393
Request parameters
Parameter Description

page

The zero-based page number (optional)

size

The requested page size (optional)

name

The name associated with the task execution

Example request
$ curl 'http://localhost:9393/tasks/executions?name=taskB&page=0&size=10' -i
Response structure
HTTP/1.1 200 OK
Content-Type: application/hal+json;charset=UTF-8
Content-Length: 714

{
  "_embedded" : {
    "taskExecutionResourceList" : [ {
      "executionId" : 2,
      "exitCode" : 0,
      "taskName" : "taskB",
      "startTime" : null,
      "endTime" : null,
      "exitMessage" : null,
      "arguments" : [ ],
      "jobExecutionIds" : [ ],
      "errorMessage" : null,
      "externalExecutionId" : "taskB-33b7a300-bdd3-4eb9-bb6d-a9491c775ef0",
      "_links" : {
        "self" : {
          "href" : "http://localhost:9393/tasks/executions/2"
        }
      }
    } ]
  },
  "_links" : {
    "self" : {
      "href" : "http://localhost:9393/tasks/executions?page=0&size=10"
    }
  },
  "page" : {
    "size" : 10,
    "totalElements" : 1,
    "totalPages" : 1,
    "number" : 0
  }
}

40.7.4. Task Execution Detail

Request structure
GET /tasks/executions/1 HTTP/1.1
Host: localhost:9393
Table 7. /tasks/executions/{id}
Parameter Description

id

The id of an existing task execution (required)

Request parameters

There are no request parameter for this endpoint.

Example request
$ curl 'http://localhost:9393/tasks/executions/1' -i
Response structure
HTTP/1.1 200 OK
Content-Type: application/hal+json;charset=UTF-8
Content-Length: 375

{
  "executionId" : 1,
  "exitCode" : 0,
  "taskName" : "taskA",
  "startTime" : null,
  "endTime" : null,
  "exitMessage" : null,
  "arguments" : [ ],
  "jobExecutionIds" : [ ],
  "errorMessage" : null,
  "externalExecutionId" : "taskA-6fd01784-9f90-4d7c-bfdc-22f86f0ceb9e",
  "_links" : {
    "self" : {
      "href" : "http://localhost:9393/tasks/executions/1"
    }
  }
}

40.7.5. Delete Task Execution

Request structure
DELETE /tasks/executions/1 HTTP/1.1
Host: localhost:9393
Table 8. /tasks/executions/{id}
Parameter Description

id

The id of an existing task execution (required)

Request parameters

There are no request parameter for this endpoint.

Example request
$ curl 'http://localhost:9393/tasks/executions/1' -i -X DELETE
Response structure
HTTP/1.1 200 OK

40.8. Runtime Information about Applications

It is possible to get information about running apps known to the system, either globally or individually.

40.8.1. Listing All Applications at Runtime

To retrieve information about all instances of all apps, query the /runtime/apps endpoint using GET.

Request structure
GET /runtime/apps HTTP/1.1
Accept: application/json
Host: localhost:9393
Example request
$ curl 'http://localhost:9393/runtime/apps' -i -H 'Accept: application/json'
Response structure
HTTP/1.1 200 OK
Content-Type: application/json;charset=UTF-8
Content-Length: 2555

{
  "_embedded" : {
    "appStatusResourceList" : [ {
      "deploymentId" : "mystream.http",
      "state" : "deploying",
      "instances" : {
        "_embedded" : {
          "appInstanceStatusResourceList" : [ {
            "instanceId" : "mystream.http-0",
            "state" : "deploying",
            "attributes" : {
              "guid" : "52040",
              "pid" : "31239",
              "port" : "52040",
              "stderr" : "/tmp/spring-cloud-dataflow-4970084429743361415/mystream-1501843279832/mystream.http/stderr_0.log",
              "stdout" : "/tmp/spring-cloud-dataflow-4970084429743361415/mystream-1501843279832/mystream.http/stdout_0.log",
              "url" : "http://10.194.6.24:52040",
              "working.dir" : "/tmp/spring-cloud-dataflow-4970084429743361415/mystream-1501843279832/mystream.http"
            },
            "_links" : {
              "self" : {
                "href" : "http://localhost:9393/runtime/apps/mystream.http/instances/mystream.http-0"
              }
            }
          } ]
        }
      },
      "_links" : {
        "self" : {
          "href" : "http://localhost:9393/runtime/apps/mystream.http"
        }
      }
    }, {
      "deploymentId" : "mystream.log",
      "state" : "deploying",
      "instances" : {
        "_embedded" : {
          "appInstanceStatusResourceList" : [ {
            "instanceId" : "mystream.log-0",
            "state" : "deploying",
            "attributes" : {
              "guid" : "32393",
              "pid" : "31232",
              "port" : "32393",
              "stderr" : "/tmp/spring-cloud-dataflow-4970084429743361415/mystream-1501843279727/mystream.log/stderr_0.log",
              "stdout" : "/tmp/spring-cloud-dataflow-4970084429743361415/mystream-1501843279727/mystream.log/stdout_0.log",
              "url" : "http://10.194.6.24:32393",
              "working.dir" : "/tmp/spring-cloud-dataflow-4970084429743361415/mystream-1501843279727/mystream.log"
            },
            "_links" : {
              "self" : {
                "href" : "http://localhost:9393/runtime/apps/mystream.log/instances/mystream.log-0"
              }
            }
          } ]
        }
      },
      "_links" : {
        "self" : {
          "href" : "http://localhost:9393/runtime/apps/mystream.log"
        }
      }
    } ]
  },
  "_links" : {
    "self" : {
      "href" : "http://localhost:9393/runtime/apps?page=0&size=20"
    }
  },
  "page" : {
    "size" : 20,
    "totalElements" : 2,
    "totalPages" : 1,
    "number" : 0
  }
}

40.8.2. Querying all Instances of a Single App

To retrieve information about all instances of a particular app, query the /runtime/apps/<appId>/instances endpoint using GET.

Request structure
GET /runtime/apps HTTP/1.1
Accept: application/json
Host: localhost:9393
Example request
$ curl 'http://localhost:9393/runtime/apps' -i -H 'Accept: application/json'
Response structure
HTTP/1.1 200 OK
Content-Type: application/json;charset=UTF-8
Content-Length: 2555

{
  "_embedded" : {
    "appStatusResourceList" : [ {
      "deploymentId" : "mystream.http",
      "state" : "deploying",
      "instances" : {
        "_embedded" : {
          "appInstanceStatusResourceList" : [ {
            "instanceId" : "mystream.http-0",
            "state" : "deploying",
            "attributes" : {
              "guid" : "52040",
              "pid" : "31239",
              "port" : "52040",
              "stderr" : "/tmp/spring-cloud-dataflow-4970084429743361415/mystream-1501843279832/mystream.http/stderr_0.log",
              "stdout" : "/tmp/spring-cloud-dataflow-4970084429743361415/mystream-1501843279832/mystream.http/stdout_0.log",
              "url" : "http://10.194.6.24:52040",
              "working.dir" : "/tmp/spring-cloud-dataflow-4970084429743361415/mystream-1501843279832/mystream.http"
            },
            "_links" : {
              "self" : {
                "href" : "http://localhost:9393/runtime/apps/mystream.http/instances/mystream.http-0"
              }
            }
          } ]
        }
      },
      "_links" : {
        "self" : {
          "href" : "http://localhost:9393/runtime/apps/mystream.http"
        }
      }
    }, {
      "deploymentId" : "mystream.log",
      "state" : "deploying",
      "instances" : {
        "_embedded" : {
          "appInstanceStatusResourceList" : [ {
            "instanceId" : "mystream.log-0",
            "state" : "deploying",
            "attributes" : {
              "guid" : "32393",
              "pid" : "31232",
              "port" : "32393",
              "stderr" : "/tmp/spring-cloud-dataflow-4970084429743361415/mystream-1501843279727/mystream.log/stderr_0.log",
              "stdout" : "/tmp/spring-cloud-dataflow-4970084429743361415/mystream-1501843279727/mystream.log/stdout_0.log",
              "url" : "http://10.194.6.24:32393",
              "working.dir" : "/tmp/spring-cloud-dataflow-4970084429743361415/mystream-1501843279727/mystream.log"
            },
            "_links" : {
              "self" : {
                "href" : "http://localhost:9393/runtime/apps/mystream.log/instances/mystream.log-0"
              }
            }
          } ]
        }
      },
      "_links" : {
        "self" : {
          "href" : "http://localhost:9393/runtime/apps/mystream.log"
        }
      }
    } ]
  },
  "_links" : {
    "self" : {
      "href" : "http://localhost:9393/runtime/apps?page=0&size=20"
    }
  },
  "page" : {
    "size" : 20,
    "totalElements" : 2,
    "totalPages" : 1,
    "number" : 0
  }
}

40.8.3. Querying a Single Instance of a Single App

Finally, to retrieve information about a particuler instance of a particular app, query the /runtime/apps/<appId>/instances/<instanceId> endpoint using GET.

Request structure
GET /runtime/apps HTTP/1.1
Accept: application/json
Host: localhost:9393
Example request
$ curl 'http://localhost:9393/runtime/apps' -i -H 'Accept: application/json'
Response structure
HTTP/1.1 200 OK
Content-Type: application/json;charset=UTF-8
Content-Length: 2555

{
  "_embedded" : {
    "appStatusResourceList" : [ {
      "deploymentId" : "mystream.http",
      "state" : "deploying",
      "instances" : {
        "_embedded" : {
          "appInstanceStatusResourceList" : [ {
            "instanceId" : "mystream.http-0",
            "state" : "deploying",
            "attributes" : {
              "guid" : "52040",
              "pid" : "31239",
              "port" : "52040",
              "stderr" : "/tmp/spring-cloud-dataflow-4970084429743361415/mystream-1501843279832/mystream.http/stderr_0.log",
              "stdout" : "/tmp/spring-cloud-dataflow-4970084429743361415/mystream-1501843279832/mystream.http/stdout_0.log",
              "url" : "http://10.194.6.24:52040",
              "working.dir" : "/tmp/spring-cloud-dataflow-4970084429743361415/mystream-1501843279832/mystream.http"
            },
            "_links" : {
              "self" : {
                "href" : "http://localhost:9393/runtime/apps/mystream.http/instances/mystream.http-0"
              }
            }
          } ]
        }
      },
      "_links" : {
        "self" : {
          "href" : "http://localhost:9393/runtime/apps/mystream.http"
        }
      }
    }, {
      "deploymentId" : "mystream.log",
      "state" : "deploying",
      "instances" : {
        "_embedded" : {
          "appInstanceStatusResourceList" : [ {
            "instanceId" : "mystream.log-0",
            "state" : "deploying",
            "attributes" : {
              "guid" : "32393",
              "pid" : "31232",
              "port" : "32393",
              "stderr" : "/tmp/spring-cloud-dataflow-4970084429743361415/mystream-1501843279727/mystream.log/stderr_0.log",
              "stdout" : "/tmp/spring-cloud-dataflow-4970084429743361415/mystream-1501843279727/mystream.log/stdout_0.log",
              "url" : "http://10.194.6.24:32393",
              "working.dir" : "/tmp/spring-cloud-dataflow-4970084429743361415/mystream-1501843279727/mystream.log"
            },
            "_links" : {
              "self" : {
                "href" : "http://localhost:9393/runtime/apps/mystream.log/instances/mystream.log-0"
              }
            }
          } ]
        }
      },
      "_links" : {
        "self" : {
          "href" : "http://localhost:9393/runtime/apps/mystream.log"
        }
      }
    } ]
  },
  "_links" : {
    "self" : {
      "href" : "http://localhost:9393/runtime/apps?page=0&size=20"
    }
  },
  "page" : {
    "size" : 20,
    "totalElements" : 2,
    "totalPages" : 1,
    "number" : 0
  }
}

40.9. Metrics for Stream Applications

This REST endpoint exposes metrics for stream applications. This REST enpoint requires the Metrics Collector application to be running as a separate service. If not running, this endpoint will return an empty response.

In order to learn more about the Metrics Collector, please also refer to chapter Monitoring Deployed Applications

40.9.1. Request structure

For example, a typical request may look like:

GET /metrics/streams HTTP/1.1
Accept: application/json
Host: localhost:9393

40.9.2. Example request

$ curl 'http://localhost:9393/metrics/streams' -i -H 'Accept: application/json'

40.9.3. Response structure

This REST endpoint uses Hystrix via the Spring Cloud Netflix project under the covers to make a proxy HTTP request to the Metrics Collector.

40.9.4. Example response

Therefore, the endpoint will not generate an error in case the Metrics Collector is not running, but rather gracefully degrade and return an empty response such as the following:

HTTP/1.1 200 OK
Content-Type: application/json;charset=UTF-8
Content-Length: 3

[ ]

However, if metrics are being collected and the Metrics Collector is running you should see a response similar to the listing below. The metrics data returned in the listing below is based on the example stream definition created in chapter Monitoring Deployed Applications time | log with two instances of each application deployed.

HTTP/1.1 200 OK
Content-Type: application/json;charset=UTF-8
Content-Length: 30240

[ {
  "name" : "foostream",
  "applications" : [ {
    "name" : "log120RS",
    "instances" : [ {
      "guid" : "13208",
      "index" : 1,
      "properties" : {
        "spring.cloud.dataflow.stream.app.label" : "log120RS",
        "spring.application.index" : "1",
        "spring.application.name" : "log-sink",
        "spring.cloud.dataflow.stream.name" : "foostream",
        "spring.cloud.application.guid" : "13208",
        "spring.cloud.dataflow.stream.app.type" : "sink",
        "spring.cloud.application.group" : "foostream"
      },
      "metrics" : [ {
        "name" : "integration.channel.input.errorRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.input.errorRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.input.errorRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.input.errorRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.input.errorRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.input.sendCount",
        "value" : 373.0
      }, {
        "name" : "integration.channel.input.sendRate.mean",
        "value" : 1.0
      }, {
        "name" : "integration.channel.input.sendRate.max",
        "value" : 2.01
      }, {
        "name" : "integration.channel.input.sendRate.min",
        "value" : 0.7
      }, {
        "name" : "integration.channel.input.sendRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.input.sendRate.count",
        "value" : 373.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendCount",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.sendCount",
        "value" : 74.0
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.mean",
        "value" : 0.2
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.max",
        "value" : 13.49
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.min",
        "value" : 5.0
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.count",
        "value" : 74.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendCount",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.handler.org.springframework.cloud.stream.app.log.sink.LogSinkConfiguration.logSinkHandler.serviceActivator.handler.duration.mean",
        "value" : 0.22
      }, {
        "name" : "integration.handler.org.springframework.cloud.stream.app.log.sink.LogSinkConfiguration.logSinkHandler.serviceActivator.handler.duration.max",
        "value" : 5.42
      }, {
        "name" : "integration.handler.org.springframework.cloud.stream.app.log.sink.LogSinkConfiguration.logSinkHandler.serviceActivator.handler.duration.min",
        "value" : 0.11
      }, {
        "name" : "integration.handler.org.springframework.cloud.stream.app.log.sink.LogSinkConfiguration.logSinkHandler.serviceActivator.handler.duration.stdev",
        "value" : 0.17
      }, {
        "name" : "integration.handler.org.springframework.cloud.stream.app.log.sink.LogSinkConfiguration.logSinkHandler.serviceActivator.handler.duration.count",
        "value" : 373.0
      }, {
        "name" : "integration.handler.org.springframework.cloud.stream.app.log.sink.LogSinkConfiguration.logSinkHandler.serviceActivator.handler.activeCount",
        "value" : 0.0
      }, {
        "name" : "integration.handler.logSinkHandler.duration.mean",
        "value" : 0.22
      }, {
        "name" : "integration.handler.logSinkHandler.duration.max",
        "value" : 5.4
      }, {
        "name" : "integration.handler.logSinkHandler.duration.min",
        "value" : 0.11
      }, {
        "name" : "integration.handler.logSinkHandler.duration.stdev",
        "value" : 0.17
      }, {
        "name" : "integration.handler.logSinkHandler.duration.count",
        "value" : 373.0
      }, {
        "name" : "integration.handler.logSinkHandler.activeCount",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.mean",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.max",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.min",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.count",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.activeCount",
        "value" : 0.0
      }, {
        "name" : "integration.handlerCount",
        "value" : 3.0
      }, {
        "name" : "integration.channelCount",
        "value" : 4.0
      }, {
        "name" : "integration.sourceCount",
        "value" : 0.0
      }, {
        "name" : "integration.channel.input.send.mean",
        "value" : 1.0
      }, {
        "name" : "integration.channel.errorChannel.send.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.send.mean",
        "value" : 0.2
      }, {
        "name" : "integration.channel.nullChannel.send.mean",
        "value" : 0.0
      } ]
    }, {
      "guid" : "60633",
      "index" : 0,
      "properties" : {
        "spring.cloud.dataflow.stream.app.label" : "log120RS",
        "spring.application.index" : "0",
        "spring.application.name" : "log-sink",
        "spring.cloud.dataflow.stream.name" : "foostream",
        "spring.cloud.application.guid" : "60633",
        "spring.cloud.dataflow.stream.app.type" : "sink",
        "spring.cloud.application.group" : "foostream"
      },
      "metrics" : [ {
        "name" : "integration.channel.input.errorRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.input.errorRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.input.errorRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.input.errorRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.input.errorRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.input.sendCount",
        "value" : 372.0
      }, {
        "name" : "integration.channel.input.sendRate.mean",
        "value" : 1.0
      }, {
        "name" : "integration.channel.input.sendRate.max",
        "value" : 1.98
      }, {
        "name" : "integration.channel.input.sendRate.min",
        "value" : 0.8
      }, {
        "name" : "integration.channel.input.sendRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.input.sendRate.count",
        "value" : 372.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendCount",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.sendCount",
        "value" : 74.0
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.mean",
        "value" : 0.2
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.max",
        "value" : 13.09
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.min",
        "value" : 5.0
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.count",
        "value" : 74.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendCount",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.handler.org.springframework.cloud.stream.app.log.sink.LogSinkConfiguration.logSinkHandler.serviceActivator.handler.duration.mean",
        "value" : 0.22
      }, {
        "name" : "integration.handler.org.springframework.cloud.stream.app.log.sink.LogSinkConfiguration.logSinkHandler.serviceActivator.handler.duration.max",
        "value" : 3.46
      }, {
        "name" : "integration.handler.org.springframework.cloud.stream.app.log.sink.LogSinkConfiguration.logSinkHandler.serviceActivator.handler.duration.min",
        "value" : 0.12
      }, {
        "name" : "integration.handler.org.springframework.cloud.stream.app.log.sink.LogSinkConfiguration.logSinkHandler.serviceActivator.handler.duration.stdev",
        "value" : 0.18
      }, {
        "name" : "integration.handler.org.springframework.cloud.stream.app.log.sink.LogSinkConfiguration.logSinkHandler.serviceActivator.handler.duration.count",
        "value" : 372.0
      }, {
        "name" : "integration.handler.org.springframework.cloud.stream.app.log.sink.LogSinkConfiguration.logSinkHandler.serviceActivator.handler.activeCount",
        "value" : 0.0
      }, {
        "name" : "integration.handler.logSinkHandler.duration.mean",
        "value" : 0.21
      }, {
        "name" : "integration.handler.logSinkHandler.duration.max",
        "value" : 2.84
      }, {
        "name" : "integration.handler.logSinkHandler.duration.min",
        "value" : 0.11
      }, {
        "name" : "integration.handler.logSinkHandler.duration.stdev",
        "value" : 0.18
      }, {
        "name" : "integration.handler.logSinkHandler.duration.count",
        "value" : 372.0
      }, {
        "name" : "integration.handler.logSinkHandler.activeCount",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.mean",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.max",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.min",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.count",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.activeCount",
        "value" : 0.0
      }, {
        "name" : "integration.handlerCount",
        "value" : 3.0
      }, {
        "name" : "integration.channelCount",
        "value" : 4.0
      }, {
        "name" : "integration.sourceCount",
        "value" : 0.0
      }, {
        "name" : "integration.channel.input.send.mean",
        "value" : 1.0
      }, {
        "name" : "integration.channel.errorChannel.send.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.send.mean",
        "value" : 0.2
      }, {
        "name" : "integration.channel.nullChannel.send.mean",
        "value" : 0.0
      } ]
    } ],
    "aggregateMetrics" : [ {
      "name" : "integration.channel.nullChannel.send.mean",
      "value" : 0.0
    }, {
      "name" : "integration.channel.applicationMetrics.send.mean",
      "value" : 0.4
    }, {
      "name" : "integration.channel.errorChannel.send.mean",
      "value" : 0.0
    }, {
      "name" : "integration.channel.input.send.mean",
      "value" : 2.0
    } ]
  }, {
    "name" : "time120RS",
    "instances" : [ {
      "guid" : "50467",
      "index" : 0,
      "properties" : {
        "spring.cloud.dataflow.stream.app.label" : "time120RS",
        "spring.application.index" : "0",
        "spring.application.name" : "time-source",
        "spring.cloud.dataflow.stream.name" : "foostream",
        "spring.cloud.application.guid" : "50467",
        "spring.cloud.dataflow.stream.app.type" : "source",
        "spring.cloud.application.group" : "foostream"
      },
      "metrics" : [ {
        "name" : "integration.channel.output.errorRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.output.errorRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.output.errorRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.output.errorRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.output.errorRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.output.sendCount",
        "value" : 369.0
      }, {
        "name" : "integration.channel.output.sendRate.mean",
        "value" : 1.0
      }, {
        "name" : "integration.channel.output.sendRate.max",
        "value" : 1.02
      }, {
        "name" : "integration.channel.output.sendRate.min",
        "value" : 1.0
      }, {
        "name" : "integration.channel.output.sendRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.output.sendRate.count",
        "value" : 369.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendCount",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.sendCount",
        "value" : 73.0
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.mean",
        "value" : 0.2
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.max",
        "value" : 11.05
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.min",
        "value" : 5.0
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.count",
        "value" : 73.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendCount",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.mean",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.max",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.min",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.count",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.activeCount",
        "value" : 0.0
      }, {
        "name" : "integration.source.org.springframework.cloud.stream.app.time.source.TimeSourceConfiguration.publishTime.inboundChannelAdapter.source.messageCount",
        "value" : 369.0
      }, {
        "name" : "integration.handlerCount",
        "value" : 1.0
      }, {
        "name" : "integration.channelCount",
        "value" : 4.0
      }, {
        "name" : "integration.sourceCount",
        "value" : 1.0
      }, {
        "name" : "integration.channel.output.send.mean",
        "value" : 1.0
      }, {
        "name" : "integration.channel.errorChannel.send.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.send.mean",
        "value" : 0.2
      }, {
        "name" : "integration.channel.nullChannel.send.mean",
        "value" : 0.0
      } ]
    }, {
      "guid" : "61434",
      "index" : 1,
      "properties" : {
        "spring.cloud.dataflow.stream.app.label" : "time120RS",
        "spring.application.index" : "1",
        "spring.application.name" : "time-source",
        "spring.cloud.dataflow.stream.name" : "foostream",
        "spring.cloud.application.guid" : "61434",
        "spring.cloud.dataflow.stream.app.type" : "source",
        "spring.cloud.application.group" : "foostream"
      },
      "metrics" : [ {
        "name" : "integration.channel.output.errorRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.output.errorRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.output.errorRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.output.errorRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.output.errorRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.output.sendCount",
        "value" : 375.0
      }, {
        "name" : "integration.channel.output.sendRate.mean",
        "value" : 1.0
      }, {
        "name" : "integration.channel.output.sendRate.max",
        "value" : 1.02
      }, {
        "name" : "integration.channel.output.sendRate.min",
        "value" : 1.0
      }, {
        "name" : "integration.channel.output.sendRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.output.sendRate.count",
        "value" : 375.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.errorRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendCount",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.errorChannel.sendRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.errorRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.sendCount",
        "value" : 74.0
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.mean",
        "value" : 0.2
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.max",
        "value" : 12.88
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.min",
        "value" : 5.0
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.sendRate.count",
        "value" : 74.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.errorRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendCount",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.max",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.min",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.channel.nullChannel.sendRate.count",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.mean",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.max",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.min",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.stdev",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.duration.count",
        "value" : 0.0
      }, {
        "name" : "integration.handler._org.springframework.integration.errorLogger.handler.activeCount",
        "value" : 0.0
      }, {
        "name" : "integration.source.org.springframework.cloud.stream.app.time.source.TimeSourceConfiguration.publishTime.inboundChannelAdapter.source.messageCount",
        "value" : 375.0
      }, {
        "name" : "integration.handlerCount",
        "value" : 1.0
      }, {
        "name" : "integration.channelCount",
        "value" : 4.0
      }, {
        "name" : "integration.sourceCount",
        "value" : 1.0
      }, {
        "name" : "integration.channel.output.send.mean",
        "value" : 1.0
      }, {
        "name" : "integration.channel.errorChannel.send.mean",
        "value" : 0.0
      }, {
        "name" : "integration.channel.applicationMetrics.send.mean",
        "value" : 0.2
      }, {
        "name" : "integration.channel.nullChannel.send.mean",
        "value" : 0.0
      } ]
    } ],
    "aggregateMetrics" : [ {
      "name" : "integration.channel.output.send.mean",
      "value" : 2.0
    }, {
      "name" : "integration.channel.nullChannel.send.mean",
      "value" : 0.0
    }, {
      "name" : "integration.channel.applicationMetrics.send.mean",
      "value" : 0.4
    }, {
      "name" : "integration.channel.errorChannel.send.mean",
      "value" : 0.0
    } ]
  } ]
} ]

Appendices

Having trouble with Spring Cloud Data Flow, We’d like to help!

Appendix A: Data Flow Template

As described in the previous chapter, Spring Cloud Data Flow’s functionality is completely exposed via REST endpoints. While you can use those endpoints directly, Spring Cloud Data Flow also provides a Java-based API, which makes using those REST endpoints even easier.

The central entrypoint is the DataFlowTemplate class in package org.springframework.cloud.dataflow.rest.client.

This class implements the interface DataFlowOperations and delegates to sub-templates that provide the specific functionality for each feature-set:

Interface Description

StreamOperations

REST client for stream operations

CounterOperations

REST client for counter operations

FieldValueCounterOperations

REST client for field value counter operations

AggregateCounterOperations

REST client for aggregate counter operations

TaskOperations

REST client for task operations

JobOperations

REST client for job operations

AppRegistryOperations

REST client for app registry operations

CompletionOperations

REST client for completion operations

RuntimeOperations

REST Client for runtime operations

When the DataFlowTemplate is being initialized, the sub-templates will be discovered via the REST relations, which are provided by HATEOAS.[1]

If a resource cannot be resolved, the respective sub-template will result in being NULL. A common cause is that Spring Cloud Data Flow offers for specific sets of features to be enabled/disabled when launching. For more information see Feature Toggles.

A.1. Using the Data Flow Template

When using the Data Flow Template the only needed Data Flow dependency is the Spring Cloud Data Flow Rest Client:

<dependency>
  <groupId>org.springframework.cloud</groupId>
  <artifactId>spring-cloud-dataflow-rest-client</artifactId>
  <version>1.3.0.M1</version>
</dependency>

With that dependency you will get the DataFlowTemplate class as well as all needed dependencies to make calls to a Spring Cloud Data Flow server.

When instantiating the DataFlowTemplate, you will also pass in a RestTemplate. Please be aware that the needed RestTemplate requires some additional configuration to be valid in the context of the DataFlowTemplate. When declaring a RestTemplate as a bean, the following configuration will suffice:

  @Bean
  public static RestTemplate restTemplate() {
    RestTemplate restTemplate = new RestTemplate();
    restTemplate.setErrorHandler(new VndErrorResponseErrorHandler(restTemplate.getMessageConverters()));
    for(HttpMessageConverter<?> converter : restTemplate.getMessageConverters()) {
      if (converter instanceof MappingJackson2HttpMessageConverter) {
        final MappingJackson2HttpMessageConverter jacksonConverter =
            (MappingJackson2HttpMessageConverter) converter;
        jacksonConverter.getObjectMapper()
            .registerModule(new Jackson2HalModule())
            .addMixIn(JobExecution.class, JobExecutionJacksonMixIn.class)
            .addMixIn(JobParameters.class, JobParametersJacksonMixIn.class)
            .addMixIn(JobParameter.class, JobParameterJacksonMixIn.class)
            .addMixIn(JobInstance.class, JobInstanceJacksonMixIn.class)
            .addMixIn(ExitStatus.class, ExitStatusJacksonMixIn.class)
            .addMixIn(StepExecution.class, StepExecutionJacksonMixIn.class)
            .addMixIn(ExecutionContext.class, ExecutionContextJacksonMixIn.class)
            .addMixIn(StepExecutionHistory.class, StepExecutionHistoryJacksonMixIn.class);
      }
    }
    return restTemplate;
  }

Now you can instantiate the DataFlowTemplate with:

DataFlowTemplate dataFlowTemplate = new DataFlowTemplate(
    new URI("http://localhost:9393/"), restTemplate);         (1)
1 The URI points to the ROOT of your Spring Cloud Data Flow Server.

Depending on your requirements, you can now make calls to the server. For instance, if you like to get a list of currently available applications you can execute:

PagedResources<AppRegistrationResource> apps = dataFlowTemplate.appRegistryOperations().list();

System.out.println(String.format("Retrieved %s application(s)",
    apps.getContent().size()));

for (AppRegistrationResource app : apps.getContent()) {
  System.out.println(String.format("App Name: %s, App Type: %s, App URI: %s",
    app.getName(),
    app.getType(),
    app.getUri()));
}

Appendix B: ‘How-to’ guides

This section provides answers to some common ‘how do I do that…​’ type of questions that often arise when using Spring Cloud Data Flow.

If you are having a specific problem that we don’t cover here, you might want to check out stackoverflow.com to see if someone has already provided an answer; this is also a great place to ask new questions (please use the spring-cloud-dataflow tag).

We’re also more than happy to extend this section; If you want to add a ‘how-to’ you can send us a pull request.

B.1. Configure Maven Properties

You can set the maven properties such as local maven repository location, remote maven repositories and their authentication credentials including the proxy server properties via commandline properties when starting the Dataflow server or using the SPRING_APPLICATION_JSON environment property for the Dataflow server.

The remote maven repositories need to be configured explicitly if the apps are resolved using maven repository except for local Data Flow server. The other Data Flow server implementations (that use maven resources for app artifacts resolution) have no default value for remote repositories. The local server has repo.spring.io/libs-snapshot as the default remote repository.

To pass the properties as commandline options:

$ java -jar <dataflow-server>.jar --maven.localRepository=mylocal
--maven.remote-repositories.repo1.url=https://repo1
--maven.remote-repositories.repo1.auth.username=repo1user
--maven.remote-repositories.repo1.auth.password=repo1pass
--maven.remote-repositories.repo2.url=https://repo2 --maven.proxy.host=proxyhost
--maven.proxy.port=9018 --maven.proxy.auth.username=proxyuser
--maven.proxy.auth.password=proxypass

or, using the SPRING_APPLICATION_JSON environment property:

export SPRING_APPLICATION_JSON='{ "maven": { "local-repository": "local","remote-repositories": { "repo1": { "url": "https://repo1", "auth": { "username": "repo1user", "password": "repo1pass" } },
"repo2": { "url": "https://repo2" } }, "proxy": { "host": "proxyhost", "port": 9018, "auth": { "username": "proxyuser", "password": "proxypass" } } } }'

Formatted JSON:

SPRING_APPLICATION_JSON='{
  "maven": {
    "local-repository": "local",
    "remote-repositories": {
      "repo1": {
        "url": "https://repo1",
        "auth": {
          "username": "repo1user",
          "password": "repo1pass"
        }
      },
      "repo2": {
        "url": "https://repo2"
      }
    },
    "proxy": {
      "host": "proxyhost",
      "port": 9018,
      "auth": {
        "username": "proxyuser",
        "password": "proxypass"
      }
    }
  }
}'
Depending on Spring Cloud Data Flow server implementation, you may have to pass the environment properties using the platform specific environment-setting capabilities. For instance, in Cloud Foundry, you’d be passing them as cf set-env SPRING_APPLICATION_JSON.

B.2. Logging

Spring Cloud Data Flow is built upon several Spring projects, but ultimately the dataflow-server is a Spring Boot app, so the logging techniques that apply to any Spring Boot application are applicable here as well.

While troubleshooting, following are the two primary areas where enabling the DEBUG logs could be useful.

B.3. Deployment Logs

Spring Cloud Data Flow builds upon Spring Cloud Deployer SPI and the platform specific dataflow-server uses the respective SPI implementations. Specifically, if we were to troubleshoot deployment specific issues; such as the network errors, it’d be useful to enable the DEBUG logs at the underlying deployer and the libraries used by it.

  1. For instance, if you’d like to enable DEBUG logs for the local-deployer, you’d be starting the server with following.

    $ java -jar <dataflow-server>.jar --logging.level.org.springframework.cloud.deployer.spi.local=DEBUG

    (where, org.springframework.cloud.deployer.spi.local is the global package for everything local-deployer related)

  2. For instance, if you’d like to enable DEBUG logs for the cloudfoundry-deployer, you’d be setting the following environment variable and upon restaging the dataflow-server, we will see more logs around request, response and the elaborate stack traces (upon failures). The cloudfoundry-deployer uses cf-java-client, so we will have to enable DEBUG logs for this library.

    $ cf set-env dataflow-server JAVA_OPTS '-Dlogging.level.cloudfoundry-client=DEBUG'
    $ cf restage dataflow-server

    (where, cloudfoundry-client is the global package for everything cf-java-client related)

  3. If there’s a need to review Reactor logs, which is used by the cf-java-client, then the following would be helpful.

    $ cf set-env dataflow-server JAVA_OPTS '-Dlogging.level.cloudfoundry-client=DEBUG -Dlogging.level.reactor.ipc.netty=DEBUG'
    $ cf restage dataflow-server

    (where, reactor.ipc.netty is the global package for everything reactor-netty related)

Similar to the local-deployer and cloudfoundry-deployer options as discussed above, there are equivalent settings available for Apache YARN, Apache Mesos and Kubernetes variants, too. Check out the respective SPI implementations to find out more details about the packages to configure for logging.

B.4. Application Logs

The streaming applications in Spring Cloud Data Flow are Spring Boot applications and they can be independently setup with logging configurations.

For instance, if you’d have to troubleshoot the header and payload specifics that are being passed around source, processor and sink channels, you’d be deploying the stream with the following options.

dataflow:>stream create foo --definition "http --logging.level.org.springframework.integration=DEBUG | transform --logging.level.org.springframework.integration=DEBUG | log --logging.level.org.springframework.integration=DEBUG" --deploy

(where, org.springframework.integration is the global package for everything Spring Integration related, which is responsible for messaging channels)

These properties can also be specified via deployment properties when deploying the stream.

dataflow:>stream deploy foo --properties "app.*.logging.level.org.springframework.integration=DEBUG"

B.4.1. Log redirect

Given that each application is a separate process with each maintaining it’s own set of logs, accessing individual logs could be a bit inconvinient especially in the early stages of the development when logs are accessed more often (i.e., debugging, troubleshooting, etc.). Since it is also a common pattern to rely on Local SCDF Server which deploys each application as a local JVM process using local-deployer, the framework provides support for redirecting such logs to a parent process’s streams (both stdout and stderr). So essentially with Local SCDF Server the application logs will appear in the logs of running Local SCDF Server.

Typically when you deploy the stream you will see something like this in the server logs:

017-06-28 09:50:16.372  INFO 41161 --- [nio-9393-exec-7] o.s.c.d.spi.local.LocalAppDeployer       : Deploying app with deploymentId mystream.myapp instance 0.
   Logs will be in /var/folders/l2/63gcnd9d7g5dxxpjbgr0trpw0000gn/T/spring-cloud-dataflow-5939494818997196225/mystream-1498661416369/mystream.myapp

However, by providing local.inheritLogging=true as a deployment property you will see the following:

017-06-28 09:50:16.372  INFO 41161 --- [nio-9393-exec-7] o.s.c.d.spi.local.LocalAppDeployer       : Deploying app with deploymentId mystream.myapp instance 0.
   Logs will be inherited.

After which the application logs will appear along side the server logs.

For example:

stream deploy --name mystream --properties "deployer.*.local.inheritLogging=true”

The above will enable log redirection for each application in the stream

stream deploy --name mystream --properties "deployer.myapp.local.inheritLogging=true”

The above will enable log redirection for application named ‘my app’ only.

Log redirect is only supported with local-deployer.

B.5. Frequently asked questions

In this section, we will review the frequently discussed questions in Spring Cloud Data Flow.

B.5.1. Advanced SpEL expressions

One of the powerful features of SpEL expressions is functions. Spring Integration provides jsonPath() and xpath() out-of-the-box SpEL-functions, if appropriate libraries are in the classpath. All the provided Spring Cloud Stream application starters are supplied with the json-path and spring-integration-xml jars, thus we can use those SpEL-functions in Spring Cloud Data Flow streams whenever expressions are possible. For example we can transform JSON-aware payload from the HTTP request using some jsonPath() expression:

dataflow:>stream create jsonPathTransform --definition "http | transform --expression=#jsonPath(payload,'$.price') | log" --deploy
...
dataflow:> http post --target http://localhost:8080 --data {"symbol":"SCDF","price":72.04}
dataflow:> http post --target http://localhost:8080 --data {"symbol":"SCDF","price":72.06}
dataflow:> http post --target http://localhost:8080 --data {"symbol":"SCDF","price":72.08}

In this sample we apply jsonPath for the incoming payload to extract just only the price field value. Similar syntax can be used with splitter or filter expression options. Actually any available SpEL-based option has access to the built-in SpEL-functions. For example we can extract some value from JSON data to calculate the partitionKey before sending output to the Binder:

dataflow:>stream deploy foo --properties "deployer.transform.count=2,app.transform.producer.partitionKeyExpression=#jsonPath(payload,'$.symbol')"

The same syntax can be applied for xpath() SpEL-function when you deal with XML data. Any other custom SpEL-function can also be used, but for this purpose you should build a library with the @Configuration class containing an appropriate SpelFunctionFactoryBean @Bean definition. The target Spring Cloud Stream application starter should be re-packaged to supply such a custom extension via built-in Spring Boot @ComponentScan mechanism or auto-configuration hook.

B.5.2. How to use JDBC-sink?

The JDBC-sink can be used to insert message payload data into a relational database table. By default, it inserts the entire payload into a table named after the jdbc.table-name property, and if it is not set, by default the application expects to use a table with the name messages. To alter this behavior, the JDBC sink accepts several options that you can pass using the --foo=bar notation in the stream, or change globally. The JDBC sink has a jdbc.initialize property that if set to true will result in the sink creating a table based on the specified configuration when the it starts up. If that initialize property is false, which is the default, you will have to make sure that the table to use is already available.

A stream definition using jdbc sink relying on all defaults with MySQL as the backing database looks like the following. In this example, the system time is persisted in MySQL for every second.

dataflow:>stream create --name mydata --definition "time | jdbc --spring.datasource.url=jdbc:mysql://localhost:3306/test --spring.datasource.username=root --spring.datasource.password=root --spring.datasource.driver-class-name=org.mariadb.jdbc.Driver" --deploy

For this to work, you’d have to have the following table in the MySQL database.

CREATE TABLE test.messages
(
  payload varchar(255)
);
mysql> desc test.messages;
+---------+--------------+------+-----+---------+-------+
| Field   | Type         | Null | Key | Default | Extra |
+---------+--------------+------+-----+---------+-------+
| payload | varchar(255) | YES  |     | NULL    |       |
+---------+--------------+------+-----+---------+-------+
1 row in set (0.00 sec)
mysql> select * from test.messages;
+-------------------+
| payload           |
+-------------------+
| 04/25/17 09:10:04 |
| 04/25/17 09:10:06 |
| 04/25/17 09:10:07 |
| 04/25/17 09:10:08 |
| 04/25/17 09:10:09 |
.............
.............
.............

B.5.3. How to use multiple message-binders?

For situations where the data is consumed and processed between two different message brokers, Spring Cloud Data Flow provides easy to override global configurations, out-of-the-box bridge-processor, and DSL primitives to build these type of topologies.

Let’s assume we have data queueing up in RabbitMQ (e.g., queue = fooRabbit) and the requirement is to consume all the payloads and publish them to Apache Kafka (e.g., topic = barKafka), as the destination for downstream processing.

Follow the global application of configurations to define multiple binder configurations.

# Apache Kafka Global Configurations (i.e., identified by "kafka1")
spring.cloud.dataflow.applicationProperties.stream.spring.cloud.stream.binders.kafka1.type=kafka
spring.cloud.dataflow.applicationProperties.stream.spring.cloud.stream.binders.kafka1.environment.spring.cloud.stream.kafka.binder.brokers=localhost:9092
spring.cloud.dataflow.applicationProperties.stream.spring.cloud.stream.binders.kafka1.environment.spring.cloud.stream.kafka.binder.zkNodes=localhost:2181

# RabbitMQ Global Configurations (i.e., identified by "rabbit1")
spring.cloud.dataflow.applicationProperties.stream.spring.cloud.stream.binders.rabbit1.type=rabbit
spring.cloud.dataflow.applicationProperties.stream.spring.cloud.stream.binders.rabbit1.environment.spring.rabbitmq.host=localhost
spring.cloud.dataflow.applicationProperties.stream.spring.cloud.stream.binders.rabbit1.environment.spring.rabbitmq.port=5672
In this example, both the message brokers are running locally and reachable at localhost with respective ports.

These properties can be supplied in a ".properties" file that is accessible to the server directly or via config-server.

java -jar spring-cloud-dataflow-server-local/target/spring-cloud-dataflow-server-local-1.1.4.RELEASE.jar --spring.config.location=<PATH-TO-FILE>/foo.properties

Spring Cloud Data Flow internally uses bridge-processor to directly connect different named channel destinations. Since we are publishing and subscribing from two different messaging systems, you’d have to build the bridge-processor with both RabbitMQ and Apache Kafka binders in the classpath. To do that, head over to start-scs.cfapps.io/ and select Bridge Processor, Kafka binder starter, and Rabbit binder starter as the dependencies and follow the patching procedure described in the reference guide. Specifically, for the bridge-processor, you’d have to import the BridgeProcessorConfiguration provided by the starter.

Once you have the necessary adjustments, you can build the application. Let’s register the name of the application as multiBinderBridge.

dataflow:>app register --type processor --name multiBinderBridge --uri file:///<PATH-TO-FILE>/multipleBinderBridge-0.0.1-SNAPSHOT.jar

It is time to create a stream definition with the newly registered processor application.

dataflow:>stream create fooRabbitToBarKafka --definition ":fooRabbit > multiBinderBridge --spring.cloud.stream.bindings.input.binder=rabbit1 --spring.cloud.stream.bindings.output.binder=kafka1 > :barKafka" --deploy
Since we are to consume messages from RabbitMQ (i.e., identified by rabbit1) and then publish the payload to Apache Kafka (i.e., identified by kafka1), we are supplying them as input and output channel settings respectively.
The queue fooRabbit in RabbitMQ is where the stream is consuming events from and the topic barKafka in Apache Kafka is where the data is finally landing.

Appendix C: Spring XD to SCDF

In this section you will learn all about the migration path from Spring XD to Spring Cloud Data Flow along with the tips and tricks.

C.1. Terminology Changes

Old New

XD-Admin

Server (implementations: local, cloud foundry, apache yarn, kubernetes, and apache mesos)

XD-Container

N/A

Modules

Applications

Admin UI

Dashboard

Message Bus

Binders

Batch / Job

Task

C.2. Modules to Applications

If you have custom Spring XD modules, you’d have to refactor them to use Spring Cloud Stream and Spring Cloud Task annotations, with updated dependencies and built as normal Spring Boot "applications".

C.2.1. Custom Applications

  • Spring XD’s stream and batch modules are refactored into Spring Cloud Stream and Spring Cloud Task application-starters, respectively. These applications can be used as the reference while refactoring Spring XD modules

  • There are also some samples for Spring Cloud Stream and Spring Cloud Task applications for reference

  • If you’d like to create a brand new custom application, use the getting started guide for Spring Cloud Stream and Spring Cloud Task applications and as well as review the development guide

  • Alternatively, if you’d like to patch any of the out-of-the-box stream applications, you can follow the procedure here

C.2.2. Application Registration

  • Custom Stream/Task application requires being installed to a maven repository for Local, YARN, and CF implementations or as docker images, when deploying to Kubernetes and Mesos. Other than maven and docker resolution, you can also resolve application artifacts from http, file, or as hdfs coordinates

  • Unlike Spring XD, you do not have to upload the application bits while registering custom applications anymore; instead, you’re expected to register the application coordinates that are hosted in the maven repository or by other means as discussed in the previous bullet

  • By default, none of the out-of-the-box applications are preloaded already. It is intentionally designed to provide the flexibility to register app(s), as you find appropriate for the given use-case requirement

  • Depending on the binder choice, you can manually add the appropriate binder dependency to build applications specific to that binder-type. Alternatively, you can follow the Spring Initialzr procedure to create an application with binder embedded in it

C.2.3. Application Properties

  • counter-sink:

    • The peripheral redis is not required in Spring Cloud Data Flow. If you intend to use the counter-sink, then redis becomes required, and you’re expected to have your own running redis cluster

  • field-value-counter-sink:

    • The peripheral redis is not required in Spring Cloud Data Flow. If you intend to use the field-value-counter-sink, then redis becomes required, and you’re expected to have your own running redis cluster

  • aggregate-counter-sink:

    • The peripheral redis is not required in Spring Cloud Data Flow. If you intend to use the aggregate-counter-sink, then redis becomes required, and you’re expected to have your own running redis cluster

C.3. Message Bus to Binders

Terminology wise, in Spring Cloud Data Flow, the message bus implementation is commonly referred to as binders.

C.3.1. Message Bus

Similar to Spring XD, there’s an abstraction available to extend the binder interface. By default, we take the opinionated view of Apache Kafka and RabbitMQ as the production-ready binders and are available as GA releases.

C.3.2. Binders

Selecting a binder is as simple as providing the right binder dependency in the classpath. If you’re to choose Kafka as the binder, you’d register stream applications that are pre-built with Kafka binder in it. If you were to create a custom application with Kafka binder, you’d add the following dependency in the classpath.

<dependency>
    <groupId>org.springframework.cloud</groupId>
    <artifactId>spring-cloud-stream-binder-kafka</artifactId>
    <version>1.0.2.RELEASE</version>
</dependency>
  • Spring Cloud Stream supports Apache Kafka, RabbitMQ and experimental Google PubSub and Solace JMS. All binder implementations are maintained and managed in their individual repositories

  • Every Stream/Task application can be built with a binder implementation of your choice. All the out-of-the-box applications are pre-built for both Kafka and Rabbit and they’re readily available for use as maven artifacts [Spring Cloud Stream / Spring Cloud Task or docker images [Spring Cloud Stream / Spring Cloud Task Changing the binder requires selecting the right binder dependency. Alternatively, you can download the pre-built application from this version of Spring Initializr with the desired “binder-starter” dependency

C.3.3. Named Channels

Fundamentally, all the messaging channels are backed by pub/sub semantics. Unlike Spring XD, the messaging channels are backed only by topics or topic-exchange and there’s no representation of queues in the new architecture.

  • ${xd.module.index} is not supported anymore; instead, you can directly interact with named destinations

  • stream.index changes to :<stream-name>.<label/app-name>

    • for instance: ticktock.0 changes to :ticktock.time

  • “topic/queue” prefixes are not required to interact with named-channels

    • for instance: topic:foo changes to :foo

    • for instance: stream create stream1 --definition ":foo > log"

C.3.4. Directed Graphs

If you’re building non-linear streams, you could take advantage of named destinations to build directed graphs.

for instance, in Spring XD:

stream create f --definition "queue:foo > transform --expression=payload+'-foo' | log" --deploy
stream create b --definition "queue:bar > transform --expression=payload+'-bar' | log" --deploy
stream create r --definition "http | router --expression=payload.contains('a')?'queue:foo':'queue:bar'" --deploy

for instance, in Spring Cloud Data Flow:

stream create f --definition ":foo > transform --expression=payload+'-foo' | log" --deploy
stream create b --definition ":bar > transform --expression=payload+'-bar' | log" --deploy
stream create r --definition "http | router --expression=payload.contains('a')?'foo':'bar'" --deploy

C.4. Batch to Tasks

A Task by definition, is any application that does not run forever, including Spring Batch jobs, and they end/stop at some point. Task applications can be majorly used for on-demand use-cases such as database migration, machine learning, scheduled operations etc. Using Spring Cloud Task, users can build Spring Batch jobs as microservice applications.

  • Spring Batch jobs from Spring XD are being refactored to Spring Boot applications a.k.a Spring Cloud Task applications

  • Unlike Spring XD, these “Tasks” don’t require explicit deployment; instead, a task is ready to be launched directly once the definition is declared

C.5. Shell/DSL Commands

Old Command New Command

module upload

app register / app import

module list

app list

module info

app info

admin config server

dataflow config server

job create

task create

job launch

task launch

job list

task list

job status

task status

job display

task display

job destroy

task destroy

job execution list

task execution list

runtime modules

runtime apps

C.6. REST-API

Old API New API

/modules

/apps

/runtime/modules

/runtime/apps

/runtime/modules/{moduleId}

/runtime/apps/{appId}

/jobs/definitions

/task/definitions

/jobs/deployments

/task/deployments

C.7. UI / Flo

The Admin-UI is now renamed as Dashboard. The URI for accessing the Dashboard is changed from localhost:9393/admin-ui to localhost:9393/dashboard

  • (New) Apps: Lists all the registered applications that are available for use. This view includes informational details such as the URI and the properties supported by each application. You can also register/unregister applications from this view

  • Runtime: Container changes to Runtime. The notion of xd-container is gone, replaced by out-of-the-box applications running as autonomous Spring Boot applications. The Runtime tab displays the applications running in the runtime platforms (implementations: cloud foundry, apache yarn, apache mesos, or kubernetes). You can click on each application to review relevant details about the application such as where it is running with, and what resources etc.

  • Spring Flo is now an OSS product. Flo for Spring Cloud Data Flow’s “Create Stream”, the designer-tab comes pre-built in the Dashboard

  • (New) Tasks:

    • The sub-tab “Modules” is renamed to “Apps”

    • The sub-tab “Definitions” lists all the Task definitions, including Spring Batch jobs that are orchestrated as Tasks

    • The sub-tab “Executions” lists all the Task execution details similar to Spring XD’s Job executions

C.8. Architecture Components

Spring Cloud Data Flow comes with a significantly simplified architecture. In fact, when compared with Spring XD, there are less peripherals that are necessary to operationalize Spring Cloud Data Flow.

C.8.1. ZooKeeper

ZooKeeper is not used in the new architecture.

C.8.2. RDBMS

Spring Cloud Data Flow uses an RDBMS instead of Redis for stream/task definitions, application registration, and for job repositories.The default configuration uses an embedded H2 instance, but Oracle, DB2, SqlServer, MySQL/MariaDB, PostgreSQL, H2, and HSQLDB databases are supported. To use Oracle, DB2 and SqlServer you will need to create your own Data Flow Server using Spring Initializr and add the appropriate JDBC driver dependency.

C.8.3. Redis

Running a Redis cluster is only required for analytics functionality. Specifically, when the counter-sink, field-value-counter-sink, or aggregate-counter-sink applications are used, it is expected to also have a running instance of Redis cluster.

C.8.4. Cluster Topology

Spring XD’s xd-admin and xd-container server components are replaced by stream and task applications themselves running as autonomous Spring Boot applications. The applications run natively on various platforms including Cloud Foundry, Apache YARN, Apache Mesos, or Kubernetes. You can develop, test, deploy, scale +/-, and interact with (Spring Boot) applications individually, and they can evolve in isolation.

C.9. Central Configuration

To support centralized and consistent management of an application’s configuration properties, Spring Cloud Config client libraries have been included into the Spring Cloud Data Flow server as well as the Spring Cloud Stream applications provided by the Spring Cloud Stream App Starters. You can also pass common application properties to all streams when the Data Flow Server starts.

C.10. Distribution

Spring Cloud Data Flow is a Spring Boot application. Depending on the platform of your choice, you can download the respective release uber-jar and deploy/push it to the runtime platform (cloud foundry, apache yarn, kubernetes, or apache mesos). For example, if you’re running Spring Cloud Data Flow on Cloud Foundry, you’d download the Cloud Foundry server implementation and do a cf push as explained in the reference guide.

C.11. Hadoop Distribution Compatibility

The hdfs-sink application builds upon Spring Hadoop 2.4.0 release, so this application is compatible with following Hadoop distributions.

  • Cloudera - cdh5

  • Pivotal Hadoop - phd30

  • Hortonworks Hadoop - hdp24

  • Hortonworks Hadoop - hdp23

  • Vanilla Hadoop - hadoop26

  • Vanilla Hadoop - 2.7.x (default)

C.12. YARN Deployment

Spring Cloud Data Flow can be deployed and used with Apche YARN in two different ways.

C.13. Use Case Comparison

Let’s review some use-cases to compare and contrast the differences between Spring XD and Spring Cloud Data Flow.

C.13.1. Use Case #1

(It is assumed both XD and SCDF distributions are already downloaded)

Description: Simple ticktock example using local/singlenode.

Spring XD Spring Cloud Data Flow

Start xd-singlenode server from CLI

→ xd-singlenode

Start a binder of your choice

Start local-server implementation of SCDF from the CLI

→ java -jar spring-cloud-dataflow-server-local-1.0.0.BUILD-SNAPSHOT.jar

Start xd-shell server from the CLI

→ xd-shell

Start dataflow-shell server from the CLI

→ java -jar spring-cloud-dataflow-shell-1.0.0.BUILD-SNAPSHOT.jar

Create ticktock stream

xd:>stream create ticktock --definition “time | log” --deploy

Create ticktock stream

dataflow:>stream create ticktock --definition “time | log” --deploy

Review ticktock results in the xd-singlenode server console

Review ticktock results by tailing the ticktock.log/stdout_log application logs

C.13.2. Use Case #2

(It is assumed both XD and SCDF distributions are already downloaded)

Description: Stream with custom module/application.

Spring XD Spring Cloud Data Flow

Start xd-singlenode server from CLI

→ xd-singlenode

Start a binder of your choice

Start local-server implementation of SCDF from the CLI

→ java -jar spring-cloud-dataflow-server-local-1.0.0.BUILD-SNAPSHOT.jar

Start xd-shell server from the CLI

→ xd-shell

Start dataflow-shell server from the CLI

→ java -jar spring-cloud-dataflow-shell-1.0.0.BUILD-SNAPSHOT.jar

Register custom “processor” module to transform payload to a desired format

xd:>module upload --name toupper --type processor --file <CUSTOM_JAR_FILE_LOCATION>

Register custom “processor” application to transform payload to a desired format

dataflow:>app register --name toupper --type processor --uri <MAVEN_URI_COORDINATES>

Create a stream with custom module

xd:>stream create testupper --definition “http | toupper | log” --deploy

Create a stream with custom application

dataflow:>stream create testupper --definition “http | toupper | log” --deploy

Review results in the xd-singlenode server console

Review results by tailing the testupper.log/stdout_log application logs

C.13.3. Use Case #3

(It is assumed both XD and SCDF distributions are already downloaded)

Description: Simple batch-job.

Spring XD Spring Cloud Data Flow

Start xd-singlenode server from CLI

→ xd-singlenode

Start local-server implementation of SCDF from the CLI

→ java -jar spring-cloud-dataflow-server-local-1.0.0.BUILD-SNAPSHOT.jar

Start xd-shell server from the CLI

→ xd-shell

Start dataflow-shell server from the CLI

→ java -jar spring-cloud-dataflow-shell-1.0.0.BUILD-SNAPSHOT.jar

Register custom “batch-job” module

xd:>module upload --name simple-batch --type job --file <CUSTOM_JAR_FILE_LOCATION>

Register custom “batch-job” as task application

dataflow:>app register --name simple-batch --type task --uri <MAVEN_URI_COORDINATES>

Create a job with custom batch-job module

xd:>job create batchtest --definition “simple-batch”

Create a task with custom batch-job application

dataflow:>task create batchtest --definition “simple-batch”

Deploy job

xd:>job deploy batchtest

NA

Launch job

xd:>job launch batchtest

Launch task

dataflow:>task launch batchtest

Review results in the xd-singlenode server console as well as Jobs tab in UI (executions sub-tab should include all step details)

Review results by tailing the batchtest/stdout_log application logs as well as Task tab in UI (executions sub-tab should include all step details)

Appendix D: Building

To build the source you will need to install JDK 1.8.

The build uses the Maven wrapper so you don’t have to install a specific version of Maven. To enable the tests for Redis you should run the server before bulding. See below for more information on how to run Redis.

The main build command is

$ ./mvnw clean install

You can also add '-DskipTests' if you like, to avoid running the tests.

You can also install Maven (>=3.3.3) yourself and run the mvn command in place of ./mvnw in the examples below. If you do that you also might need to add -P spring if your local Maven settings do not contain repository declarations for spring pre-release artifacts.
Be aware that you might need to increase the amount of memory available to Maven by setting a MAVEN_OPTS environment variable with a value like -Xmx512m -XX:MaxPermSize=128m. We try to cover this in the .mvn configuration, so if you find you have to do it to make a build succeed, please raise a ticket to get the settings added to source control.

The projects that require middleware generally include a docker-compose.yml, so consider using Docker Compose to run the middeware servers in Docker containers. See the README in the scripts demo repository for specific instructions about the common cases of mongo, rabbit and redis.

D.1. Documentation

There is a "full" profile that will generate documentation. You can build just the documentation by executing

$ ./mvnw clean package -DskipTests -P full -pl spring-cloud-dataflow-docs -am

D.2. Working with the code

If you don’t have an IDE preference we would recommend that you use Spring Tools Suite or Eclipse when working with the code. We use the m2eclipe eclipse plugin for maven support. Other IDEs and tools should also work without issue.

D.2.1. Importing into eclipse with m2eclipse

We recommend the m2eclipe eclipse plugin when working with eclipse. If you don’t already have m2eclipse installed it is available from the "eclipse marketplace".

Unfortunately m2e does not yet support Maven 3.3, so once the projects are imported into Eclipse you will also need to tell m2eclipse to use the .settings.xml file for the projects. If you do not do this you may see many different errors related to the POMs in the projects. Open your Eclipse preferences, expand the Maven preferences, and select User Settings. In the User Settings field click Browse and navigate to the Spring Cloud project you imported selecting the .settings.xml file in that project. Click Apply and then OK to save the preference changes.

Alternatively you can copy the repository settings from .settings.xml into your own ~/.m2/settings.xml.

D.2.2. Importing into eclipse without m2eclipse

If you prefer not to use m2eclipse you can generate eclipse project metadata using the following command:

$ ./mvnw eclipse:eclipse

The generated eclipse projects can be imported by selecting import existing projects from the file menu.

Appendix E: Contributing

Spring Cloud is released under the non-restrictive Apache 2.0 license, and follows a very standard Github development process, using Github tracker for issues and merging pull requests into master. If you want to contribute even something trivial please do not hesitate, but follow the guidelines below.

E.1. Sign the Contributor License Agreement

Before we accept a non-trivial patch or pull request we will need you to sign the contributor’s agreement. Signing the contributor’s agreement does not grant anyone commit rights to the main repository, but it does mean that we can accept your contributions, and you will get an author credit if we do. Active contributors might be asked to join the core team, and given the ability to merge pull requests.

E.2. Code Conventions and Housekeeping

None of these is essential for a pull request, but they will all help. They can also be added after the original pull request but before a merge.

  • Use the Spring Framework code format conventions. If you use Eclipse you can import formatter settings using the eclipse-code-formatter.xml file from the Spring Cloud Build project. If using IntelliJ, you can use the Eclipse Code Formatter Plugin to import the same file.

  • Make sure all new .java files to have a simple Javadoc class comment with at least an @author tag identifying you, and preferably at least a paragraph on what the class is for.

  • Add the ASF license header comment to all new .java files (copy from existing files in the project)

  • Add yourself as an @author to the .java files that you modify substantially (more than cosmetic changes).

  • Add some Javadocs and, if you change the namespace, some XSD doc elements.

  • A few unit tests would help a lot as well — someone has to do it.

  • If no-one else is using your branch, please rebase it against the current master (or other target branch in the main project).

  • When writing a commit message please follow these conventions, if you are fixing an existing issue please add Fixes gh-XXXX at the end of the commit message (where XXXX is the issue number).


1. HATEOAS stands for Hypermedia as the Engine of Application State