2. Sources

2. Sources
Prev	Part II. Starters	Next

2.1 File Source

This application polls a directory and sends new files or their contents to the output channel. The file source provides the contents of a File as a byte array by default. However, this can be customized using the --mode option:

ref Provides a java.io.File reference
lines Will split files line-by-line and emit a new message for each line
contents The default. Provides the contents of a file as a byte array

When using --mode=lines, you can also provide the additional option --withMarkers=true. If set to true, the underlying FileSplitter will emit additional start-of-file and end-of-file marker messages before and after the actual data. The payload of these 2 additional marker messages is of type FileSplitter.FileMarker. The option withMarkers defaults to false if not explicitly set.

2.1.1 Input

N/A (Reads from a file system directory).

2.1.2 Output

mode = contents

Headers:

Content-Type: application/octet-stream
file_originalFile: <java.io.File>
file_name: <file name>

Payload:

A byte[] filled with the file contents.

mode = lines

Headers:

Content-Type: text/plain
file_originalFile: <java.io.File>
file_name: <file name>
correlationId: <UUID> (same for each line)
sequenceNumber: <n>
sequenceSize: 0 (number of lines is not know until the file is read)

Payload:

A String for each line.

The first line is optionally preceded by a message with a START marker payload. The last line is optionally followed by a message with an END marker payload.

Marker presence and format are determined by the with-markers and markers-json properties.

mode = ref

Headers:

None.

Payload:

A java.io.File object.

2.1.3 Options

The file source has the following options:

file.consumer.markers-json: When 'fileMarkers == true', specify if they should be produced as FileSplitter.FileMarker objects or JSON. (Boolean, default: true)
file.consumer.mode: The FileReadingMode to use for file reading sources. Values are 'ref' - The File object, 'lines' - a message per line, or 'contents' - the contents as bytes. (FileReadingMode, default: <none>, possible values: ref,lines,contents)
file.consumer.with-markers: Set to true to emit start of file/end of file marker messages before/after the data. Only valid with FileReadingMode 'lines'. (Boolean, default: <none>)
file.directory: The directory to poll for new files. (String, default: <none>)
file.filename-pattern: A simple ant pattern to match files. (String, default: <none>)
file.filename-regex: A regex pattern to match files. (Pattern, default: <none>)
file.prevent-duplicates: Set to true to include an AcceptOnceFileListFilter which prevents duplicates. (Boolean, default: true)
trigger.cron: Cron expression value for the Cron Trigger. (String, default: <none>)
trigger.date-format: Format for the date value. (String, default: <none>)
trigger.fixed-delay: Fixed delay for periodic triggers. (Integer, default: 1)
trigger.initial-delay: Initial delay for periodic triggers. (Integer, default: 0)
trigger.max-messages: Maximum messages per poll, -1 means infinity. (Long, default: -1)
trigger.time-unit: The TimeUnit to apply to delay values. (TimeUnit, default: SECONDS, possible values: NANOSECONDS,MICROSECONDS,MILLISECONDS,SECONDS,MINUTES,HOURS,DAYS)

The ref option is useful in some cases in which the file contents are large and it would be more efficient to send the file path.

2.1.4 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one of the folders and build it:

$ ./mvnw clean package

2.1.5 Examples

java -jar file_source.jar --file.directory=/tmp/foo --file.consumer.mode=lines --trigger.fixed-delay=60

2.2 FTP Source

This source application supports transfer of files using the FTP protocol. Files are transferred from the remote directory to the local directory where the app is deployed. Messages emitted by the source are provided as a byte array by default. However, this can be customized using the --mode option:

ref Provides a java.io.File reference
lines Will split files line-by-line and emit a new message for each line
contents The default. Provides the contents of a file as a byte array

See also MetaDataStore options for possible shared persistent store configuration for the FtpPersistentAcceptOnceFileListFilter used in the FTP Source.

2.2.1 Input

N/A (Fetches files from an FTP server).

2.2.2 Output

mode = contents

Headers:

Content-Type: application/octet-stream
file_originalFile: <java.io.File>
file_name: <file name>

Payload:

A byte[] filled with the file contents.

mode = lines

Headers:

Content-Type: text/plain
file_orginalFile: <java.io.File>
file_name: <file name>
correlationId: <UUID> (same for each line)
sequenceNumber: <n>
sequenceSize: 0 (number of lines is not know until the file is read)

Payload:

A String for each line.

The first line is optionally preceded by a message with a START marker payload. The last line is optionally followed by a message with an END marker payload.

Marker presence and format are determined by the with-markers and markers-json properties.

mode = ref

Headers:

None.

Payload:

A java.io.File object.

2.2.3 Options

The ftp source has the following options:

file.consumer.markers-json: When 'fileMarkers == true', specify if they should be produced as FileSplitter.FileMarker objects or JSON. (Boolean, default: true)
file.consumer.mode: The FileReadingMode to use for file reading sources. Values are 'ref' - The File object, 'lines' - a message per line, or 'contents' - the contents as bytes. (FileReadingMode, default: <none>, possible values: ref,lines,contents)
file.consumer.with-markers: Set to true to emit start of file/end of file marker messages before/after the data. Only valid with FileReadingMode 'lines'. (Boolean, default: <none>)
ftp.auto-create-local-dir: Set to true to create the local directory if it does not exist. (Boolean, default: true)
ftp.delete-remote-files: Set to true to delete remote files after successful transfer. (Boolean, default: false)
ftp.factory.cache-sessions: <documentation missing> (Boolean, default: <none>)
ftp.factory.client-mode: The client mode to use for the FTP session. (ClientMode, default: <none>, possible values: ACTIVE,PASSIVE)
ftp.factory.host: <documentation missing> (String, default: <none>)
ftp.factory.password: <documentation missing> (String, default: <none>)
ftp.factory.port: The port of the server. (Integer, default: 21)
ftp.factory.username: <documentation missing> (String, default: <none>)
ftp.filename-pattern: A filter pattern to match the names of files to transfer. (String, default: <none>)
ftp.filename-regex: A filter regex pattern to match the names of files to transfer. (Pattern, default: <none>)
ftp.local-dir: The local directory to use for file transfers. (File, default: <none>)
ftp.preserve-timestamp: Set to true to preserve the original timestamp. (Boolean, default: true)
ftp.remote-dir: The remote FTP directory. (String, default: /)
ftp.remote-file-separator: The remote file separator. (String, default: /)
ftp.tmp-file-suffix: The suffix to use while the transfer is in progress. (String, default: .tmp)
trigger.cron: Cron expression value for the Cron Trigger. (String, default: <none>)
trigger.date-format: Format for the date value. (String, default: <none>)
trigger.fixed-delay: Fixed delay for periodic triggers. (Integer, default: 1)
trigger.initial-delay: Initial delay for periodic triggers. (Integer, default: 0)
trigger.max-messages: Maximum messages per poll, -1 means infinity. (Long, default: -1)
trigger.time-unit: The TimeUnit to apply to delay values. (TimeUnit, default: SECONDS, possible values: NANOSECONDS,MICROSECONDS,MILLISECONDS,SECONDS,MINUTES,HOURS,DAYS)

2.2.4 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one one of the folders and build it:

$ ./mvnw clean package

2.2.5 Examples

java -jar ftp_source.jar --ftp.remote-dir=foo --file.mode=lines --trigger.fixed-delay=60 --ftp.factory.host=ftpserver \
         --ftp.factory.username=user --ftp.factory.password=pw --ftp.local-dir=/foo

2.3 Gemfire Source

This source allows you to subscribe to any creates or updates to a Gemfire region. The application configures a client cache and client region, along with the necessary subscriptions enabled. By default the payload contains the updated entry value, but may be controlled by passing in a SpEL expression that uses the EntryEvent as the evaluation context.

To enable SSL communication between Geode Source and the Geode cluster you need to provide the URIs of the Keystore and Truststore files using the gemfire.security.ssl.keystore-uri and gemfire.security.ssl.truststore-uri properties. (If a single file is ued for both stores then point both URIs to it).

2.3.1 Input

N/A

2.3.2 Output

Headers

content-type: text/plain

Payload

String

2.3.3 Options

The gemfire source supports the following configuration properties:

gemfire.cache-event-expression: SpEL expression to extract fields from a cache event. (Expression, default: <none>)
gemfire.pool.connect-type: Specifies connection type: 'server' or 'locator'. (ConnectType, default: <none>, possible values: locator,server)
gemfire.pool.host-addresses: Specifies one or more Gemfire locator or server addresses formatted as [host]:[port]. (InetSocketAddress[], default: <none>)
gemfire.pool.subscription-enabled: Set to true to enable subscriptions for the client pool. Required to sync updates to the client cache. (Boolean, default: false)
gemfire.region.region-name: The region name. (String, default: <none>)
gemfire.security.password: The cache password. (String, default: <none>)
gemfire.security.ssl.ciphers: Configures the SSL ciphers used for secure Socket connections as an array of valid cipher names. (String, default: any)
gemfire.security.ssl.keystore-type: Identifies the type of Keystore used for SSL communications (e.g. JKS, PKCS11, etc.). (String, default: JKS)
gemfire.security.ssl.keystore-uri: Location of the pre-created Keystore URI to be used for connecting to the Geode cluster. (Resource, default: <none>)
gemfire.security.ssl.ssl-keystore-password: Password for accessing the keys truststore (String, default: <none>)
gemfire.security.ssl.ssl-truststore-password: Password for accessing the trust store. (String, default: <none>)
gemfire.security.ssl.truststore-type: Identifies the type of truststore used for SSL communications (e.g. JKS, PKCS11, etc.). (String, default: JKS)
gemfire.security.ssl.truststore-uri: Location of the pre-created truststore URI to be used for connecting to the Geode cluster. (Resource, default: <none>)
gemfire.security.ssl.user-home-directory: Local directory to cache the truststore and keystore files downloaded form the truststoreUri and keystoreUri locations. (String, default: user.home)
gemfire.security.username: The cache username. (String, default: <none>)

2.3.4 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one of the folders and build it:

$ ./mvnw clean package

2.3.5 Examples

java -jar ./gemfire-source.jar --gemfire.region.region-name=MyRegion --gemfire.cacheEventExpression="newValue"

2.4 Gemfire-CQ Source

Continuous query allows client applications to create a GemFire query using Object Query Language (OQL) and to register a CQ listener which subscribes to the query and is notified every time the query’s result set changes. The gemfire-cq source registers a CQ which will post CQEvent messages to the stream.

To enable SSL communication between Geode CQ and the Geode cluster you need to provide the URIs of the Keystore and Truststore files using the gemfire.security.ssl.keystore-uri and gemfire.security.ssl.truststore-uri properties. (If a single file is ued for both stores then point both URIs to it).

2.4.1 Input

N/A

2.4.2 Output

Headers

content-type: text/plain

Payload

String

2.4.3 Options

The gemfire-cq source supports the following configuration properties:

gemfire.cq-event-expression: SpEL expression to use to extract data from a cq event. (Expression, default: <none>)
gemfire.pool.connect-type: Specifies connection type: 'server' or 'locator'. (ConnectType, default: <none>, possible values: locator,server)
gemfire.pool.host-addresses: Specifies one or more Gemfire locator or server addresses formatted as [host]:[port]. (InetSocketAddress[], default: <none>)
gemfire.pool.subscription-enabled: Set to true to enable subscriptions for the client pool. Required to sync updates to the client cache. (Boolean, default: false)
gemfire.query: The OQL query (String, default: <none>)
gemfire.security.password: The cache password. (String, default: <none>)
gemfire.security.ssl.ciphers: Configures the SSL ciphers used for secure Socket connections as an array of valid cipher names. (String, default: any)
gemfire.security.ssl.keystore-type: Identifies the type of Keystore used for SSL communications (e.g. JKS, PKCS11, etc.). (String, default: JKS)
gemfire.security.ssl.keystore-uri: Location of the pre-created Keystore URI to be used for connecting to the Geode cluster. (Resource, default: <none>)
gemfire.security.ssl.ssl-keystore-password: Password for accessing the keys truststore (String, default: <none>)
gemfire.security.ssl.ssl-truststore-password: Password for accessing the trust store. (String, default: <none>)
gemfire.security.ssl.truststore-type: Identifies the type of truststore used for SSL communications (e.g. JKS, PKCS11, etc.). (String, default: JKS)
gemfire.security.ssl.truststore-uri: Location of the pre-created truststore URI to be used for connecting to the Geode cluster. (Resource, default: <none>)
gemfire.security.ssl.user-home-directory: Local directory to cache the truststore and keystore files downloaded form the truststoreUri and keystoreUri locations. (String, default: user.home)
gemfire.security.username: The cache username. (String, default: <none>)

2.4.4 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one of the folders and build it:

$ ./mvnw clean package

2.4.5 Examples

java -jar gemfire-cq-source.jar --gemfire.query=

2.5 Http Source

A source application that listens for HTTP requests and emits the body as a message payload. If the Content-Type matches text/* or application/json, the payload will be a String, otherwise the payload will be a byte array.

2.5.1 Input

N/A

2.5.2 Output

Headers:

Content-Type: Any

Payload:

If content type matches text/* or application/json

String

If content type does not match text/* or application/json

byte array

2.5.3 Options

The http source supports the following configuration properties:

http.cors.allow-credentials: Whether the browser should include any cookies associated with the domain of the request being annotated. (Boolean, default: <none>)
http.cors.allowed-headers: List of request headers that can be used during the actual request. (String[], default: <none>)
http.cors.allowed-origins: List of allowed origins, e.g. "http://domain1.com". (String[], default: <none>)
http.enable-csrf: The security CSRF enabling flag. Makes sense only if 'enableSecurity = true'. (Boolean, default: false)
http.enable-security: The security enabling flag. (Boolean, default: false)
http.mapped-request-headers: Headers that will be mapped. (String[], default: <none>)
http.path-pattern: An Ant-Style pattern to determine which http requests will be captured. (String, default: /)
server.port: Server HTTP port. (Integer, default: 8080)

	Note
	Security is disabled for this application by default. To enable it, you should use the mentioned above `http.enable-security = true` property.

2.5.4 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one one of the folders and build it:

$ ./mvnw clean package

2.5.5 Examples

java -jar http_source.jar

2.6 JDBC Source

This source polls data from an RDBMS. This source is fully based on the DataSourceAutoConfiguration, so refer to the Spring Boot JDBC Support for more information.

2.6.1 Input

N/A

2.6.2 Output

Headers

Content-Type: application/x-java-object

Payload

Map<String, Object> when jdbc.split == true (default) and List<Map<String, Object>> otherwise

2.6.3 Options

The jdbc source has the following options:

jdbc.max-rows-per-poll: Max numbers of rows to process for each poll. (Integer, default: 0)
jdbc.query: The query to use to select data. (String, default: <none>)
jdbc.split: Whether to split the SQL result as individual messages. (Boolean, default: true)
jdbc.update: An SQL update statement to execute for marking polled messages as 'seen'. (String, default: <none>)
spring.datasource.data: Data (DML) script resource references. (List<String>, default: <none>)
spring.datasource.driver-class-name: Fully qualified name of the JDBC driver. Auto-detected based on the URL by default. (String, default: <none>)
spring.datasource.initialization-mode: Initialize the datasource using available DDL and DML scripts. (DataSourceInitializationMode, default: embedded, possible values: ALWAYS,EMBEDDED,NEVER)
spring.datasource.password: Login password of the database. (String, default: <none>)
spring.datasource.schema: Schema (DDL) script resource references. (List<String>, default: <none>)
spring.datasource.url: JDBC url of the database. (String, default: <none>)
spring.datasource.username: Login username of the database. (String, default: <none>)
trigger.cron: Cron expression value for the Cron Trigger. (String, default: <none>)
trigger.date-format: Format for the date value. (String, default: <none>)
trigger.fixed-delay: Fixed delay for periodic triggers. (Integer, default: 1)
trigger.initial-delay: Initial delay for periodic triggers. (Integer, default: 0)
trigger.max-messages: Maximum messages per poll, -1 means infinity. (Long, default: 1)
trigger.time-unit: The TimeUnit to apply to delay values. (TimeUnit, default: <none>, possible values: NANOSECONDS,MICROSECONDS,MILLISECONDS,SECONDS,MINUTES,HOURS,DAYS)

Also see the Spring Boot Documentation for addition DataSource properties and TriggerProperties and MaxMessagesProperties for polling options.

2.6.4 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one one of the folders and build it:

$ ./mvnw clean package

2.6.5 Examples

java -jar jdbc_source.jar --query=<QUERY> [datasource credentials]

2.7 JMS Source

The "jms" source enables receiving messages from JMS.

2.7.1 Input

N/A

2.7.2 Output

Headers

content-type: text/plain

Payload

String

Headers

content-type: application/octet-stream

Payload

byte[]

Headers

content-type: application/x-java-serialized-object

Payload

java.io.Serializable

Headers

content-type: application/x-java-object

Payload

Map

2.7.3 Options

The jms source has the following options:

jms.client-id: Client id for durable subscriptions. (String, default: <none>)
jms.destination: The destination from which to receive messages (queue or topic). (String, default: <none>)
jms.message-selector: A selector for messages; (String, default: <none>)
jms.session-transacted: True to enable transactions and select a DefaultMessageListenerContainer, false to select a SimpleMessageListenerContainer. (Boolean, default: true)
jms.subscription-durable: True for a durable subscription. (Boolean, default: <none>)
jms.subscription-name: The name of a durable or shared subscription. (String, default: <none>)
jms.subscription-shared: True for a shared subscription. (Boolean, default: <none>)
spring.jms.jndi-name: Connection factory JNDI name. When set, takes precedence to others connection factory auto-configurations. (String, default: <none>)
spring.jms.listener.acknowledge-mode: Acknowledge mode of the container. By default, the listener is transacted with automatic acknowledgment. (AcknowledgeMode, default: <none>, possible values: AUTO,CLIENT,DUPS_OK)
spring.jms.listener.auto-startup: Start the container automatically on startup. (Boolean, default: true)
spring.jms.listener.concurrency: Minimum number of concurrent consumers. (Integer, default: <none>)
spring.jms.listener.max-concurrency: Maximum number of concurrent consumers. (Integer, default: <none>)
spring.jms.pub-sub-domain: Whether the default destination type is topic. (Boolean, default: false)

	Note
	Spring boot broker configuration is used; refer to the Spring Boot Documentation for more information. The `spring.jms.*` properties above are also handled by the boot JMS support.

2.7.4 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one of the folders and build it:

$ ./mvnw clean package

2.7.5 Examples

java -jar jms-source.jar --jms.destination=

2.8 Load Generator Source

A source that sends generated data and dispatches it to the stream. This is to provide a method for users to identify the performance of Spring Cloud Data Flow in different environments and deployment types.

2.8.1 Input

N/A

2.8.2 Output

Headers:

Content-Type: application/octet-stream

Payload:

byte[]

2.8.3 Options

The load-generator source has the following options:

load-generator.generate-timestamp: <documentation missing> (Boolean, default: false)
load-generator.message-count: <documentation missing> (Integer, default: 1000)
load-generator.message-size: <documentation missing> (Integer, default: 1000)
load-generator.producers: <documentation missing> (Integer, default: 1)

2.8.4 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one one of the folders and build it:

$ ./mvnw clean package

2.8.5 Examples

java -jar load-generator-source.jar

2.9 Mail Source

A source module that listens for Emails and emits the message body as a message payload.

2.9.1 Input

N/A

2.9.2 Output

Headers

content-type: text/plain

Payload

String

2.9.3 Options

The mail source supports the following configuration properties:

mail.charset: The charset for byte[] mail-to-string transformation. (String, default: UTF-8)
mail.delete: Set to true to delete email after download. (Boolean, default: false)
mail.expression: Configure a SpEL expression to select messages. (String, default: true)
mail.idle-imap: Set to true to use IdleImap Configuration. (Boolean, default: false)
mail.java-mail-properties: JavaMail properties as a new line delimited string of name-value pairs, e.g. 'foo=bar\n baz=car'. (Properties, default: <none>)
mail.mark-as-read: Set to true to mark email as read. (Boolean, default: false)
mail.url: Mail connection URL for connection to Mail server e.g. 'imaps://username:[email protected]:993/Inbox'. (URLName, default: <none>)
mail.user-flag: The flag to mark messages when the server does not support \Recent (String, default: <none>)
trigger.cron: Cron expression value for the Cron Trigger. (String, default: <none>)
trigger.date-format: Format for the date value. (String, default: <none>)
trigger.fixed-delay: Fixed delay for periodic triggers. (Integer, default: 1)
trigger.initial-delay: Initial delay for periodic triggers. (Integer, default: 0)
trigger.max-messages: Maximum messages per poll, -1 means infinity. (Long, default: 1)
trigger.time-unit: The TimeUnit to apply to delay values. (TimeUnit, default: <none>, possible values: NANOSECONDS,MICROSECONDS,MILLISECONDS,SECONDS,MINUTES,HOURS,DAYS)

2.9.4 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one of the folders and build it:

$ ./mvnw clean package

2.9.5 Examples

java -jar mail-source.jar --mail.javaMailProperties= --mail.url= --mail.expression= \
    --mail.charset= --mail.userFlag=

2.10 MongoDB Source

This source polls data from MongoDB. This source is fully based on the MongoDataAutoConfiguration, so refer to the Spring Boot MongoDB Support for more information.

2.10.1 Input

N/A

2.10.2 Output

Headers:

Content-Type: text/plain

Payload:

String

2.10.3 Options

The mongodb source has the following options:

mongodb.collection: The MongoDB collection to query (String, default: <none>)
mongodb.query: The MongoDB query (String, default: { })
mongodb.query-expression: The SpEL expression in MongoDB query DSL style (Expression, default: <none>)
mongodb.split: Whether to split the query result as individual messages. (Boolean, default: true)
spring.data.mongodb.authentication-database: Authentication database name. (String, default: <none>)
spring.data.mongodb.database: Database name. (String, default: <none>)
spring.data.mongodb.field-naming-strategy: Fully qualified name of the FieldNamingStrategy to use. (Class<?>, default: <none>)
spring.data.mongodb.grid-fs-database: GridFS database name. (String, default: <none>)
spring.data.mongodb.host: Mongo server host. Cannot be set with URI. (String, default: <none>)
spring.data.mongodb.password: Login password of the mongo server. Cannot be set with URI. (Character[], default: <none>)
spring.data.mongodb.port: Mongo server port. Cannot be set with URI. (Integer, default: <none>)
spring.data.mongodb.uri: Mongo database URI. Cannot be set with host, port and credentials. (String, default: mongodb://localhost/test)
spring.data.mongodb.username: Login user of the mongo server. Cannot be set with URI. (String, default: <none>)
trigger.cron: Cron expression value for the Cron Trigger. (String, default: <none>)
trigger.date-format: Format for the date value. (String, default: <none>)
trigger.fixed-delay: Fixed delay for periodic triggers. (Integer, default: 1)
trigger.initial-delay: Initial delay for periodic triggers. (Integer, default: 0)
trigger.max-messages: Maximum messages per poll, -1 means infinity. (Long, default: -1)
trigger.time-unit: The TimeUnit to apply to delay values. (TimeUnit, default: SECONDS, possible values: NANOSECONDS,MICROSECONDS,MILLISECONDS,SECONDS,MINUTES,HOURS,DAYS)

Also see the Spring Boot Documentation for additional MongoProperties properties. See and TriggerProperties for polling options.

2.10.4 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one of the folders and build it:

$ ./mvnw clean package

2.10.5 Examples

java -jar mongodb-source.jar --mongodb.query= --mongodb.collection=

2.11 MQTT Source

The "mqtt" source enables receiving messages from MQTT.

2.11.1 Input

N/A

2.11.2 Output

Headers:

Payload:

String if binary setting is false (default)
byte[] if binary setting is true

2.11.3 Options

The mqtt source has the following options:

mqtt.binary: true to leave the payload as bytes (Boolean, default: false)
mqtt.charset: the charset used to convert bytes to String (when binary is false) (String, default: UTF-8)
mqtt.clean-session: whether the client and server should remember state across restarts and reconnects (Boolean, default: true)
mqtt.client-id: identifies the client (String, default: stream.client.id.source)
mqtt.connection-timeout: the connection timeout in seconds (Integer, default: 30)
mqtt.keep-alive-interval: the ping interval in seconds (Integer, default: 60)
mqtt.password: the password to use when connecting to the broker (String, default: guest)
mqtt.persistence: 'memory' or 'file' (String, default: memory)
mqtt.persistence-directory: Persistence directory (String, default: /tmp/paho)
mqtt.qos: the qos; a single value for all topics or a comma-delimited list to match the topics (int[], default: [0])
mqtt.topics: the topic(s) (comma-delimited) to which the source will subscribe (String[], default: [stream.mqtt])
mqtt.url: location of the mqtt broker(s) (comma-delimited list) (String[], default: [tcp://localhost:1883])
mqtt.username: the username to use when connecting to the broker (String, default: guest)

2.11.4 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one one of the folders and build it:

$ ./mvnw clean package

2.11.5 Examples

java -jar mqtt-source.jar --mqtt.clientId=

2.12 RabbitMQ Source

The "rabbit" source enables receiving messages from RabbitMQ.

The queue(s) must exist before the stream is deployed; they are not created automatically. You can easily create a Queue using the RabbitMQ web UI.

2.12.1 Input

N/A

2.12.2 Output

Headers

content-type: text/plain

Payload

String

Headers

content-type: application/octet-stream

Payload

byte[]

Headers

content-type: application/x-java-serialized-object

Payload

java.io.Serializable

2.12.3 Options

The rabbit source has the following options:

rabbit.enable-retry: true to enable retry. (Boolean, default: false)
rabbit.initial-retry-interval: Initial retry interval when retry is enabled. (Integer, default: 1000)
rabbit.mapped-request-headers: Headers that will be mapped. (String[], default: [STANDARD_REQUEST_HEADERS])
rabbit.max-attempts: The maximum delivery attempts when retry is enabled. (Integer, default: 3)
rabbit.max-retry-interval: Max retry interval when retry is enabled. (Integer, default: 30000)
rabbit.own-connection: When true, use a separate connection based on the boot properties. (Boolean, default: false)
rabbit.queues: The queues to which the source will listen for messages. (String[], default: <none>)
rabbit.requeue: Whether rejected messages should be requeued. (Boolean, default: true)
rabbit.retry-multiplier: Retry backoff multiplier when retry is enabled. (Double, default: 2)
rabbit.transacted: Whether the channel is transacted. (Boolean, default: false)
spring.rabbitmq.addresses: Comma-separated list of addresses to which the client should connect. (String, default: <none>)
spring.rabbitmq.connection-timeout: Connection timeout. Set it to zero to wait forever. (Duration, default: <none>)
spring.rabbitmq.host: RabbitMQ host. (String, default: localhost)
spring.rabbitmq.password: Login to authenticate against the broker. (String, default: guest)
spring.rabbitmq.port: RabbitMQ port. (Integer, default: 5672)
spring.rabbitmq.publisher-confirms: Whether to enable publisher confirms. (Boolean, default: false)
spring.rabbitmq.publisher-returns: Whether to enable publisher returns. (Boolean, default: false)
spring.rabbitmq.requested-heartbeat: Requested heartbeat timeout; zero for none. If a duration suffix is not specified, seconds will be used. (Duration, default: <none>)
spring.rabbitmq.username: Login user to authenticate to the broker. (String, default: guest)
spring.rabbitmq.virtual-host: Virtual host to use when connecting to the broker. (String, default: <none>)

Also see the Spring Boot Documentation for addition properties for the broker connections and listener properties.

A Note About Retry

Note

With the default ackMode (AUTO) and requeue (true) options, failed message deliveries will be retried indefinitely. Since there is not much processing in the rabbit source, the risk of failure in the source itself is small, unless the downstream Binder is not connected for some reason. Setting requeue to false will cause messages to be rejected on the first attempt (and possibly sent to a Dead Letter Exchange/Queue if the broker is so configured). The enableRetry option allows configuration of retry parameters such that a failed message delivery can be retried and eventually discarded (or dead-lettered) when retries are exhausted. The delivery thread is suspended during the retry interval(s). Retry options are enableRetry, maxAttempts, initialRetryInterval, retryMultiplier, and maxRetryInterval. Message deliveries failing with a MessageConversionException are never retried; the assumption being that if a message could not be converted on the first attempt, subsequent attempts will also fail. Such messages are discarded (or dead-lettered).

2.12.4 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one of the folders and build it:

$ ./mvnw clean package

2.12.5 Examples

java -jar rabbit-source.jar --rabbit.queues=

2.13 Amazon S3 Source

This source app supports transfer of files using the Amazon S3 protocol. Files are transferred from the remote directory (S3 bucket) to the local directory where the application is deployed.

Messages emitted by the source are provided as a byte array by default. However, this can be customized using the --mode option:

ref Provides a java.io.File reference
lines Will split files line-by-line and emit a new message for each line
contents The default. Provides the contents of a file as a byte array

2.13.1 Input

N/A

2.13.2 Output

mode = contents

Headers:

Content-Type: application/octet-stream
file_orginalFile: <java.io.File>
file_name: <file name>

Payload:

A byte[] filled with the file contents.

mode = lines

Headers:

Content-Type: text/plain
file_orginalFile: <java.io.File>
file_name: <file name>
correlationId: <UUID> (same for each line)
sequenceNumber: <n>
sequenceSize: 0 (number of lines is not know until the file is read)

Payload:

A String for each line.

The first line is optionally preceded by a message with a START marker payload. The last line is optionally followed by a message with an END marker payload.

Marker presence and format are determined by the with-markers and markers-json properties.

mode = ref

Headers:

None.

Payload:

A java.io.File object.

2.13.3 Options

The s3 source has the following options:

file.consumer.markers-json: When 'fileMarkers == true', specify if they should be produced as FileSplitter.FileMarker objects or JSON. (Boolean, default: true)
file.consumer.mode: The FileReadingMode to use for file reading sources. Values are 'ref' - The File object, 'lines' - a message per line, or 'contents' - the contents as bytes. (FileReadingMode, default: <none>, possible values: ref,lines,contents)
file.consumer.with-markers: Set to true to emit start of file/end of file marker messages before/after the data. Only valid with FileReadingMode 'lines'. (Boolean, default: <none>)
s3.auto-create-local-dir: Create or not the local directory. (Boolean, default: true)
s3.delete-remote-files: Delete or not remote files after processing. (Boolean, default: false)
s3.filename-pattern: The pattern to filter remote files. (String, default: <none>)
s3.filename-regex: The regexp to filter remote files. (Pattern, default: <none>)
s3.local-dir: The local directory to store files. (File, default: <none>)
s3.preserve-timestamp: To transfer or not the timestamp of the remote file to the local one. (Boolean, default: true)
s3.remote-dir: AWS S3 bucket resource. (String, default: bucket)
s3.remote-file-separator: Remote File separator. (String, default: /)
s3.tmp-file-suffix: Temporary file suffix. (String, default: .tmp)
trigger.cron: Cron expression value for the Cron Trigger. (String, default: <none>)
trigger.date-format: Format for the date value. (String, default: <none>)
trigger.fixed-delay: Fixed delay for periodic triggers. (Integer, default: 1)
trigger.initial-delay: Initial delay for periodic triggers. (Integer, default: 0)
trigger.max-messages: Maximum messages per poll, -1 means infinity. (Long, default: -1)
trigger.time-unit: The TimeUnit to apply to delay values. (TimeUnit, default: SECONDS, possible values: NANOSECONDS,MICROSECONDS,MILLISECONDS,SECONDS,MINUTES,HOURS,DAYS)

2.13.4 Amazon AWS common options

The Amazon S3 Source (as all other Amazon AWS applications) is based on the Spring Cloud AWS project as a foundation, and its auto-configuration classes are used automatically by Spring Boot. Consult their documentation regarding required and useful auto-configuration properties.

Some of them are about AWS credentials:

cloud.aws.credentials.accessKey
cloud.aws.credentials.secretKey
cloud.aws.credentials.instanceProfile
cloud.aws.credentials.profileName
cloud.aws.credentials.profilePath

Other are for AWS Region definition:

cloud.aws.region.auto
cloud.aws.region.static

And for AWS Stack:

cloud.aws.stack.auto
cloud.aws.stack.name

2.13.5 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one one of the folders and build it:

$ ./mvnw clean package

2.13.6 Examples

java -jar s3-source.jar --s3.remoteDir=/tmp/foo --file.consumer.mode=lines --trigger.fixed-delay=60

2.14 SFTP Source

This source app supports transfer of files using the SFTP protocol. Files are transferred from the remote directory to the local directory where the application is deployed.

Messages emitted by the source are provided as a byte array by default. However, this can be customized using the --mode option:

ref Provides a java.io.File reference
lines Will split files line-by-line and emit a new message for each line
contents The default. Provides the contents of a file as a byte array

When configuring the sftp.factory.known-hosts-expression option, the root object of the evaluation is the application context, an example might be sftp.factory.known-hosts-expression = @systemProperties['user.home'] + '/.ssh/known_hosts'.

See also MetadataStore options for possible shared persistent store configuration for the SftpPersistentAcceptOnceFileListFilter and IdempotentReceiverInterceptor used in the SFTP Source.

2.14.1 Multiple SFTP Servers

This source supports polling multiple sftp servers. This requires configuring multiple session factories. The following configuration will poll two sftp servers, consuming files in a round-robin fashion:

sftp.factories.one.host=host1
sftp.factories.one.port=1234,
sftp.factories.one.username = user1,
sftp.factories.one.password = pass1,
...
sftp.factories.two.host=host2,
sftp.factories.two.port=2345,
sftp.factories.two.username = user2,
sftp.factories.two.password = pass2,
sftp.directories=one.sftpSource,two.sftpSecondSource,
sftp.max-fetch=1,
sftp.fair=true

Note

The TaskLaunchRequest output functionality is currently supported here for legacy reasons. If you are interested in this feature, we recommend using the sftp-datafow-source which is intended specifically for this use case. A task launch request posted to the Data Flow Server API is much simpler to use than the TaskLaunchRequest supported by this app which supports launching tasks using one of the provided platform specific task launchers. Using a platform specific task launcher makes it possible to launch tasks when a Data Flow server is not deployed, but requires several additional configuration parameters.

2.14.2 Input

N/A (Fetches files from an SFTP server).

2.14.3 Output

mode = contents

Headers:

Content-Type: application/octet-stream
file_originalFile: <java.io.File>
file_name: <file name>

Payload:

A byte[] filled with the file contents.

mode = lines

Headers:

Content-Type: text/plain
file_originalFile: <java.io.File>
file_name: <file name>
correlationId: <UUID> (same for each line)
sequenceNumber: <n>
sequenceSize: 0 (number of lines is not know until the file is read)

Payload:

A String for each line.

The first line is optionally preceded by a message with a START marker payload. The last line is optionally followed by a message with an END marker payload.

Marker presence and format are determined by the with-markers and markers-json properties.

mode = ref

Headers:

None.

Payload:

A java.io.File object.

task-launcher-output = true

Headers:

Content-Type: application/json
file_remoteDirectory: <java.lang.String>

Payload:

A TaskLaunchRequest object with the following set as command line arguments (also bound to job parameters for Spring Batch):

<task.local-file-path-parameter-name>=<task.local-file-path-parameter-value>
<task.remote-file-path-parameter-name>=<task.remote-file-path-parameter-value>
Any provided`task.parameters`

task.resource-uri is required. task.deployment-properties and task.environment-properties are optional.

2.14.4 Options

The sftp source has the following options:

file.consumer.markers-json: When 'fileMarkers == true', specify if they should be produced as FileSplitter.FileMarker objects or JSON. (Boolean, default: true)
file.consumer.mode: The FileReadingMode to use for file reading sources. Values are 'ref' - The File object, 'lines' - a message per line, or 'contents' - the contents as bytes. (FileReadingMode, default: <none>, possible values: ref,lines,contents)
file.consumer.with-markers: Set to true to emit start of file/end of file marker messages before/after the data. Only valid with FileReadingMode 'lines'. (Boolean, default: <none>)
sftp.auto-create-local-dir: Set to true to create the local directory if it does not exist. (Boolean, default: true)
sftp.delete-remote-files: Set to true to delete remote files after successful transfer. (Boolean, default: false)
sftp.directories: A list of factory "name.directory" pairs. (String[], default: <none>)
sftp.factories: A map of factory names to factories. (Map<String, Factory>, default: <none>)
sftp.factory.allow-unknown-keys: True to allow an unknown or changed key. (Boolean, default: false)
sftp.factory.host: The host name of the server. (String, default: localhost)
sftp.factory.known-hosts-expression: A SpEL expression resolving to the location of the known hosts file. (Expression, default: <none>)
sftp.factory.pass-phrase: Passphrase for user's private key. (String, default: <empty string>)
sftp.factory.password: The password to use to connect to the server. (String, default: <none>)
sftp.factory.port: The port of the server. (Integer, default: 22)
sftp.factory.private-key: Resource location of user's private key. (String, default: <empty string>)
sftp.factory.username: The username to use to connect to the server. (String, default: <none>)
sftp.fair: True for fair polling of multiple servers/directories. (Boolean, default: false)
sftp.filename-pattern: A filter pattern to match the names of files to transfer. (String, default: <none>)
sftp.filename-regex: A filter regex pattern to match the names of files to transfer. (Pattern, default: <none>)
sftp.list-only: Set to true to return file metadata without the entire payload. (Boolean, default: false)
sftp.local-dir: The local directory to use for file transfers. (File, default: <none>)
sftp.max-fetch: The maximum number of remote files to fetch per poll; default unlimited. Does not apply when listing files or building task launch requests. (Integer, default: <none>)
sftp.preserve-timestamp: Set to true to preserve the original timestamp. (Boolean, default: true)
sftp.remote-dir: The remote FTP directory. (String, default: /)
sftp.remote-file-separator: The remote file separator. (String, default: /)
sftp.stream: Set to true to stream the file rather than copy to a local directory. (Boolean, default: false)
sftp.task-launcher-output: Set to true to create output suitable for a task launch request. (Boolean, default: false)
sftp.task.application-name: The task application name. (String, default: <none>)
sftp.task.data-source-password: The datasource password to be applied to the TaskLaunchRequest. (String, default: <none>)
sftp.task.data-source-url: The datasource url to be applied to the TaskLaunchRequest. Defaults to h2 in-memory JDBC datasource url. (String, default: jdbc:h2:tcp://localhost:19092/mem:dataflow)
sftp.task.data-source-user-name: The datasource user name to be applied to the TaskLaunchRequest. Defaults to "sa" (String, default: sa)
sftp.task.deployment-properties: Comma delimited list of deployment properties to be applied to the TaskLaunchRequest. (String, default: <none>)
sftp.task.environment-properties: Comma delimited list of environment properties to be applied to the TaskLaunchRequest. (String, default: <none>)
sftp.task.local-file-path-parameter-name: Value to use as the local file parameter name. (String, default: localFilePath)
sftp.task.local-file-path-parameter-value: The file path to use as the local file parameter value. Defaults to "java.io.tmpdir". (String, default: <none>)
sftp.task.parameters: Comma separated list of optional parameters in key=value format. (List<String>, default: <none>)
sftp.task.remote-file-path-parameter-name: Value to use as the remote file parameter name. (String, default: remoteFilePath)
sftp.task.resource-uri: The URI of the task artifact to be applied to the TaskLaunchRequest. (String, default: <empty string>)
sftp.tmp-file-suffix: The suffix to use while the transfer is in progress. (String, default: .tmp)
trigger.cron: Cron expression value for the Cron Trigger. (String, default: <none>)
trigger.date-format: Format for the date value. (String, default: <none>)
trigger.fixed-delay: Fixed delay for periodic triggers. (Integer, default: 1)
trigger.initial-delay: Initial delay for periodic triggers. (Integer, default: 0)
trigger.max-messages: Maximum messages per poll, -1 means infinity. (Long, default: -1)
trigger.time-unit: The TimeUnit to apply to delay values. (TimeUnit, default: SECONDS, possible values: NANOSECONDS,MICROSECONDS,MILLISECONDS,SECONDS,MINUTES,HOURS,DAYS)

2.14.5 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one one of the folders and build it:

$ ./mvnw clean package

2.14.6 Examples

java -jar sftp_source.jar --sftp.remote-dir=foo --file.consumer.mode=lines --trigger.fixed-delay=60 \
         --sftp.factory.host=sftpserver --sftp.factory.username=user --sftp.factory.password=pw --sftp.local-dir=/foo

2.15 SYSLOG Source

The syslog source receives SYSLOG packets over UDP, TCP, or both. RFC3164 (BSD) and RFC5424 formats are supported.

2.15.1 Input

N/A

2.15.2 Output

Headers

content-type: application/json

Payload

Map of field/values

2.15.3 Options

The syslog source has the following options:

syslog.buffer-size: the buffer size used when decoding messages; larger messages will be rejected. (Integer, default: 2048)
syslog.nio: whether or not to use NIO (when supporting a large number of connections). (Boolean, default: false)
syslog.port: The port to listen on. (Integer, default: 1514)
syslog.protocol: tcp or udp (String, default: tcp)
syslog.reverse-lookup: whether or not to perform a reverse lookup on the incoming socket. (Boolean, default: false)
syslog.rfc: '5424' or '3164' - the syslog format according the the RFC; 3164 is aka 'BSD' format. (String, default: 3164)
syslog.socket-timeout: the socket timeout. (Integer, default: 0)

2.15.4 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one of the folders and build it:

$ ./mvnw clean package

2.15.5 Examples

java -jar syslog-source.jar --syslog.rfc=5424 --syslog.protocol=tcp

2.16 TCP

The tcp source acts as a server and allows a remote party to connect to it and submit data over a raw tcp socket.

TCP is a streaming protocol and some mechanism is needed to frame messages on the wire. A number of decoders are available, the default being 'CRLF' which is compatible with Telnet.

Messages produced by the TCP source application have a byte[] payload.

2.16.1 Input

N/A

2.16.2 Output

Headers:

Content-Type: application/octet-stream

Payload:

byte[]

2.16.3 Options

tcp.buffer-size: The buffer size used when decoding messages; larger messages will be rejected. (Integer, default: 2048)
tcp.decoder: The decoder to use when receiving messages. (Encoding, default: <none>, possible values: CRLF,LF,NULL,STXETX,RAW,L1,L2,L4)
tcp.nio: Whether or not to use NIO. (Boolean, default: false)
tcp.port: The port on which to listen; 0 for the OS to choose a port. (Integer, default: 1234)
tcp.reverse-lookup: Perform a reverse DNS lookup on the remote IP Address; if false, just the IP address is included in the message headers. (Boolean, default: false)
tcp.socket-timeout: The timeout (ms) before closing the socket when no data is received. (Integer, default: 120000)
tcp.use-direct-buffers: Whether or not to use direct buffers. (Boolean, default: false)

2.16.4 Available Decoders

Text Data

CRLF (default): text terminated by carriage return (0x0d) followed by line feed (0x0a)
LF: text terminated by line feed (0x0a)
NULL: text terminated by a null byte (0x00)
STXETX: text preceded by an STX (0x02) and terminated by an ETX (0x03)

Text and Binary Data

RAW: no structure - the client indicates a complete message by closing the socket
L1: data preceded by a one byte (unsigned) length field (supports up to 255 bytes)
L2: data preceded by a two byte (unsigned) length field (up to 2¹⁶-1 bytes)
L4: data preceded by a four byte (signed) length field (up to 2³¹-1 bytes)

2.16.5 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one one of the folders and build it:

$ ./mvnw clean package

2.16.6 Examples

java -jar tcp_source.jar --tcp.decoder=LF

The "decoder" property determines the message format (default is termination with CRLF).

2.17 TCP Client as a Source which connects to a TCP server and receives data

2.17.1 Input

N/A

2.17.2 Output

Headers:

Content-Type: application/octet-stream

Payload:

byte[]

2.17.3 Options

The tcp-client source has the following options:

tcp.buffer-size: The buffer size used when decoding messages; larger messages will be rejected. (Integer, default: 2048)
tcp.charset: The charset used when converting from bytes to String. (String, default: UTF-8)
tcp.decoder: The decoder to use when receiving messages. (Encoding, default: <none>, possible values: CRLF,LF,NULL,STXETX,RAW,L1,L2,L4)
tcp.host: The host to which this client will connect. (String, default: localhost)
tcp.nio: Whether or not to use NIO. (Boolean, default: false)
tcp.port: The port on which to listen; 0 for the OS to choose a port. (Integer, default: 1234)
tcp.retry-interval: Retry interval (in milliseconds) to check the connection and reconnect. (Long, default: 60000)
tcp.reverse-lookup: Perform a reverse DNS lookup on the remote IP Address; if false, just the IP address is included in the message headers. (Boolean, default: false)
tcp.socket-timeout: The timeout (ms) before closing the socket when no data is received. (Integer, default: 120000)
tcp.use-direct-buffers: Whether or not to use direct buffers. (Boolean, default: false)

2.17.4 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one one of the folders and build it:

$ ./mvnw clean package

2.17.5 Examples

java -jar tcp_client_source.jar --tcp.decoder=LF

2.18 Time Source

The time source will simply emit a String with the current time every so often.

2.18.1 Input

N/A

2.18.2 Output

Headers:

Content-Type: text/plain

Payload:

A String with the time output.

2.18.3 Options

The time source has the following options:

trigger.cron: Cron expression value for the Cron Trigger. (String, default: <none>)
trigger.date-format: Format for the date value. (String, default: <none>)
trigger.fixed-delay: Fixed delay for periodic triggers. (Integer, default: 1)
trigger.initial-delay: Initial delay for periodic triggers. (Integer, default: 0)
trigger.max-messages: Maximum messages per poll, -1 means infinity. (Long, default: 1)
trigger.time-unit: The TimeUnit to apply to delay values. (TimeUnit, default: <none>, possible values: NANOSECONDS,MICROSECONDS,MILLISECONDS,SECONDS,MINUTES,HOURS,DAYS)

2.18.4 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one one of the folders and build it:

$ ./mvnw clean package

2.18.5 Examples

java -jar time-source.jar

2.19 Trigger Source

This app sends trigger based on a fixed delay, date or cron expression. A payload which is evaluated using SpEL can also be sent each time the trigger fires.

2.19.1 Input

N/A

2.19.2 Output

Headers:

Payload:

Any

2.19.3 Options

The trigger source has the following options:

trigger.cron: Cron expression value for the Cron Trigger. (String, default: <none>)
trigger.date-format: Format for the date value. (String, default: <none>)
trigger.fixed-delay: Fixed delay for periodic triggers. (Integer, default: 1)
trigger.initial-delay: Initial delay for periodic triggers. (Integer, default: 0)
trigger.max-messages: Maximum messages per poll, -1 means infinity. (Long, default: 1)
trigger.source.payload: The expression for the payload of the Source module. (Expression, default: <none>)
trigger.time-unit: The TimeUnit to apply to delay values. (TimeUnit, default: <none>, possible values: NANOSECONDS,MICROSECONDS,MILLISECONDS,SECONDS,MINUTES,HOURS,DAYS)

2.19.4 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one one of the folders and build it:

$ ./mvnw clean package

2.19.5 Examples

java -jar trigger_source.jar --trigger.source.payload=payload-expression

2.20 TriggerTask Source

The TriggerTask app sends a TaskLaunchRequest based on a fixed delay, date or cron expression. The TaskLaunchRequest is used by a tasklauncher-* sink that will deploy and launch a task. The only required property for the triggertask is the --uri which specifies the artifact that will be launched by the tasklauncher-* that you have selected. The user is also allowed to set the command line arguments as well as the Spring Boot properties that are used by the task.

2.20.1 Input

N/A

2.20.2 Output

Headers:

Content-Type: application/octet-stream

Payload:

A byte array containing the TaskLaunchRequest

2.20.3 Options

The triggertask source has the following options:

trigger.cron: Cron expression value for the Cron Trigger. (String, default: <none>)
trigger.date-format: Format for the date value. (String, default: <none>)
trigger.fixed-delay: Fixed delay for periodic triggers. (Integer, default: 1)
trigger.initial-delay: Initial delay for periodic triggers. (Integer, default: 0)
trigger.max-messages: Maximum messages per poll, -1 means infinity. (Long, default: 1)
trigger.source.payload: The expression for the payload of the Source module. (Expression, default: <none>)
trigger.time-unit: The TimeUnit to apply to delay values. (TimeUnit, default: <none>, possible values: NANOSECONDS,MICROSECONDS,MILLISECONDS,SECONDS,MINUTES,HOURS,DAYS)
triggertask.application-name: The name to be applied to the launched task.. (String, default: <empty string>)
triggertask.command-line-args: Space delimited key=value pairs to be used as commandline variables for the task. (String, default: <empty string>)
triggertask.deployment-properties: Comma delimited key=value pairs to be used as deploymentProperties for the task. (String, default: <empty string>)
triggertask.environment-properties: Comma delimited key=value pairs to be used as environmentProperties for the task. (String, default: <empty string>)
triggertask.uri: The uri to the task artifact. (String, default: <empty string>)

2.20.4 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one one of the folders and build it:

$ ./mvnw clean package

Examples

java -jar trigger_task.jar --triggertask.uri=maven://org.springframework.cloud.task.app:timestamp-task:1.2.0.RELEASE

2.21 Twitter Stream Source

This source ingests data from Twitter’s streaming API. It uses the sample and filter stream endpoints rather than the full "firehose" which needs special access. The endpoint used will depend on the parameters you supply in the stream definition (some are specific to the filter endpoint).

You need to supply all keys and secrets (both consumer and accessToken) to authenticate for this source, so it is easiest if you just add these as the following environment variables: CONSUMER_KEY, CONSUMER_SECRET, ACCESS_TOKEN and ACCESS_TOKEN_SECRET.

2.21.1 Input

N/A

2.21.2 Output

Headers

Content-Type: text/plain

Payload

String

2.21.3 Options

The twitterstream source has the following options:

twitter.credentials.access-token: Access token (String, default: <none>)
twitter.credentials.access-token-secret: Access token secret (String, default: <none>)
twitter.credentials.consumer-key: Consumer key (String, default: <none>)
twitter.credentials.consumer-secret: Consumer secret (String, default: <none>)
twitter.stream.follow: A comma separated list of user IDs, indicating the users to return statuses for in the stream. (String, default: <none>)
twitter.stream.language: The language of the tweet text. (String, default: <none>)
twitter.stream.locations: A set of bounding boxes to track. (String, default: <none>)
twitter.stream.stream-type: Twitter stream type (such as sample, firehose). Default is sample. (TwitterStreamType, default: <none>, possible values: SAMPLE,FIREHOSE,FILTER)
twitter.stream.track: Keywords to track. (String, default: <none>)

	Note
	`twitterstream` emit JSON in the native Twitter format.

2.21.4 Build

$ ./mvnw clean install -PgenerateApps
$ cd apps

You can find the corresponding binder based projects here. You can then cd into one one of the folders and build it:

$ ./mvnw clean package

2.21.5 Examples

java -jar twitter_stream_source.jar --twitter.credentials.consumerKey=<CONSUMER_KEY> --twitter.credentials.consumerSecret=<CONSUMER_SECRET> \
    --twitter.credentials.accessToken=<ACCESS_TOKEN> --twitter.credentials.accessTokenSecret=<ACCESS_TOKEN_SECRET>