org.springframework.transaction.jta

Class JtaTransactionManager

java.lang.Object

org.springframework.transaction.support.AbstractPlatformTransactionManager

org.springframework.transaction.jta.JtaTransactionManager

All Implemented Interfaces:

Serializable, InitializingBean, TransactionFactory, PlatformTransactionManager

Direct Known Subclasses:

WebLogicJtaTransactionManager, WebSphereUowTransactionManager

public class JtaTransactionManager
extends AbstractPlatformTransactionManager
implements TransactionFactory, InitializingBean, Serializable

PlatformTransactionManager implementation for JTA, delegating to a backend JTA provider. This is typically used to delegate to a Java EE server's transaction coordinator, but may also be configured with a local JTA provider which is embedded within the application.

This transaction manager is appropriate for handling distributed transactions, i.e. transactions that span multiple resources, and for controlling transactions on application server resources (e.g. JDBC DataSources available in JNDI) in general. For a single JDBC DataSource, DataSourceTransactionManager is perfectly sufficient, and for accessing a single resource with Hibernate (including transactional cache), HibernateTransactionManager is appropriate, for example.

For typical JTA transactions (REQUIRED, SUPPORTS, MANDATORY, NEVER), a plain JtaTransactionManager definition is all you need, portable across all Java EE servers. This corresponds to the functionality of the JTA UserTransaction, for which Java EE specifies a standard JNDI name ("java:comp/UserTransaction"). There is no need to configure a server-specific TransactionManager lookup for this kind of JTA usage.

Transaction suspension (REQUIRES_NEW, NOT_SUPPORTED) is just available with a JTA TransactionManager being registered. Common TransactionManager locations are autodetected by JtaTransactionManager, provided that the "autodetectTransactionManager" flag is set to "true" (which it is by default).

Note: Support for the JTA TransactionManager interface is not required by Java EE. Almost all Java EE servers expose it, but do so as extension to EE. There might be some issues with compatibility, despite the TransactionManager interface being part of JTA. As a consequence, Spring provides various vendor-specific PlatformTransactionManagers, which are recommended to be used if appropriate: WebLogicJtaTransactionManager and WebSphereUowTransactionManager. For all other Java EE servers, the standard JtaTransactionManager is sufficient.

This pure JtaTransactionManager class supports timeouts but not per-transaction isolation levels. Custom subclasses may override the doJtaBegin(org.springframework.transaction.jta.JtaTransactionObject, org.springframework.transaction.TransactionDefinition) method for specific JTA extensions in order to provide this functionality; Spring includes a corresponding WebLogicJtaTransactionManager class for WebLogic Server. Such adapters for specific Java EE transaction coordinators may also expose transaction names for monitoring; with standard JTA, transaction names will simply be ignored.

Consider using Spring's tx:jta-transaction-manager configuration element for automatically picking the appropriate JTA platform transaction manager (automatically detecting WebLogic and WebSphere).

JTA 1.1 adds the TransactionSynchronizationRegistry facility, as public Java EE 5 API in addition to the standard JTA UserTransaction handle. As of Spring 2.5, this JtaTransactionManager autodetects the TransactionSynchronizationRegistry and uses it for registering Spring-managed synchronizations when participating in an existing JTA transaction (e.g. controlled by EJB CMT). If no TransactionSynchronizationRegistry is available, then such synchronizations will be registered via the (non-EE) JTA TransactionManager handle.

This class is serializable. However, active synchronizations do not survive serialization.

Since:

24.03.2003

Author:

Juergen Hoeller

See Also:

UserTransaction, TransactionManager, TransactionSynchronizationRegistry, setUserTransactionName(java.lang.String), setUserTransaction(javax.transaction.UserTransaction), setTransactionManagerName(java.lang.String), setTransactionManager(javax.transaction.TransactionManager), WebLogicJtaTransactionManager, Serialized Form

Nested Class Summary

Nested classes/interfaces inherited from class org.springframework.transaction.support.AbstractPlatformTransactionManager

AbstractPlatformTransactionManager.SuspendedResourcesHolder

Field Summary

Fields

Modifier and Type	Field and Description
static String	DEFAULT_TRANSACTION_SYNCHRONIZATION_REGISTRY_NAME Standard Java EE 5 JNDI location for the JTA TransactionSynchronizationRegistry.
static String	DEFAULT_USER_TRANSACTION_NAME Default JNDI location for the JTA UserTransaction.
static String[]	FALLBACK_TRANSACTION_MANAGER_NAMES Fallback JNDI locations for the JTA TransactionManager.

Fields inherited from class org.springframework.transaction.support.AbstractPlatformTransactionManager

logger, SYNCHRONIZATION_ALWAYS, SYNCHRONIZATION_NEVER, SYNCHRONIZATION_ON_ACTUAL_TRANSACTION

Constructor Summary

Constructors

Constructor and Description
JtaTransactionManager() Create a new JtaTransactionManager instance, to be configured as bean.
JtaTransactionManager(TransactionManager transactionManager) Create a new JtaTransactionManager instance.
JtaTransactionManager(UserTransaction userTransaction) Create a new JtaTransactionManager instance.
JtaTransactionManager(UserTransaction userTransaction, TransactionManager transactionManager) Create a new JtaTransactionManager instance.

Method Summary

Modifier and Type	Method and Description
void	afterPropertiesSet() Initialize the UserTransaction as well as the TransactionManager handle.
protected void	applyIsolationLevel(JtaTransactionObject txObject, int isolationLevel) Apply the given transaction isolation level.
protected void	applyTimeout(JtaTransactionObject txObject, int timeout) Apply the given transaction timeout.
protected UserTransaction	buildUserTransaction(TransactionManager transactionManager) Build a UserTransaction handle based on the given TransactionManager.
protected void	checkUserTransactionAndTransactionManager() Check the UserTransaction as well as the TransactionManager handle, assuming standard JTA requirements.
Transaction	createTransaction(String name, int timeout) Create an active Transaction object based on the given name and timeout.
protected void	doBegin(Object transaction, TransactionDefinition definition) Begin a new transaction with semantics according to the given transaction definition.
protected void	doCleanupAfterCompletion(Object transaction) Cleanup resources after transaction completion.
protected void	doCommit(DefaultTransactionStatus status) Perform an actual commit of the given transaction.
protected JtaTransactionObject	doGetJtaTransaction(UserTransaction ut) Get a JTA transaction object for the given current UserTransaction.
protected Object	doGetTransaction() This implementation returns a JtaTransactionObject instance for the JTA UserTransaction.
protected void	doJtaBegin(JtaTransactionObject txObject, TransactionDefinition definition) Perform a JTA begin on the JTA UserTransaction or TransactionManager.
protected void	doJtaResume(JtaTransactionObject txObject, Object suspendedTransaction) Perform a JTA resume on the JTA TransactionManager.
protected Object	doJtaSuspend(JtaTransactionObject txObject) Perform a JTA suspend on the JTA TransactionManager.
protected void	doRegisterAfterCompletionWithJtaTransaction(JtaTransactionObject txObject, List<TransactionSynchronization> synchronizations) Register a JTA synchronization on the JTA TransactionManager, for calling afterCompletion on the given Spring TransactionSynchronizations.
protected void	doResume(Object transaction, Object suspendedResources) Resume the resources of the current transaction.
protected void	doRollback(DefaultTransactionStatus status) Perform an actual rollback of the given transaction.
protected void	doSetRollbackOnly(DefaultTransactionStatus status) Set the given transaction rollback-only.
protected Object	doSuspend(Object transaction) Suspend the resources of the current transaction.
protected TransactionManager	findTransactionManager(UserTransaction ut) Find the JTA TransactionManager through autodetection: checking whether the UserTransaction object implements the TransactionManager, and checking the fallback JNDI locations.
protected TransactionSynchronizationRegistry	findTransactionSynchronizationRegistry(UserTransaction ut, TransactionManager tm) Find the JTA 1.1 TransactionSynchronizationRegistry through autodetection: checking whether the UserTransaction object or TransactionManager object implements it, and checking Java EE 5's standard JNDI location.
protected UserTransaction	findUserTransaction() Find the JTA UserTransaction through a default JNDI lookup: "java:comp/UserTransaction".
Properties	getJndiEnvironment() Return the JNDI environment to use for JNDI lookups.
JndiTemplate	getJndiTemplate() Return the JndiTemplate used for JNDI lookups.
TransactionManager	getTransactionManager() Return the JTA TransactionManager that this transaction manager uses, if any.
TransactionSynchronizationRegistry	getTransactionSynchronizationRegistry() Return the JTA 1.1 TransactionSynchronizationRegistry that this transaction manager uses, if any.
UserTransaction	getUserTransaction() Return the JTA UserTransaction that this transaction manager uses.
protected void	initTransactionSynchronizationRegistry() Initialize the JTA 1.1 TransactionSynchronizationRegistry, if available.
protected void	initUserTransactionAndTransactionManager() Initialize the UserTransaction as well as the TransactionManager handle.
protected boolean	isExistingTransaction(Object transaction) Check if the given transaction object indicates an existing transaction (that is, a transaction which has already started).
protected TransactionManager	lookupTransactionManager(String transactionManagerName) Look up the JTA TransactionManager in JNDI via the configured name.
protected TransactionSynchronizationRegistry	lookupTransactionSynchronizationRegistry(String registryName) Look up the JTA 1.1 TransactionSynchronizationRegistry in JNDI via the configured name.
protected UserTransaction	lookupUserTransaction(String userTransactionName) Look up the JTA UserTransaction in JNDI via the configured name.
protected void	registerAfterCompletionWithExistingTransaction(Object transaction, List<TransactionSynchronization> synchronizations) Register the given list of transaction synchronizations with the existing transaction.
protected TransactionManager	retrieveTransactionManager() Allows subclasses to retrieve the JTA TransactionManager in a vendor-specific manner.
protected TransactionSynchronizationRegistry	retrieveTransactionSynchronizationRegistry() Allows subclasses to retrieve the JTA 1.1 TransactionSynchronizationRegistry in a vendor-specific manner.
protected UserTransaction	retrieveUserTransaction() Allows subclasses to retrieve the JTA UserTransaction in a vendor-specific manner.
void	setAllowCustomIsolationLevels(boolean allowCustomIsolationLevels) Set whether to allow custom isolation levels to be specified.
void	setAutodetectTransactionManager(boolean autodetectTransactionManager) Set whether to autodetect a JTA UserTransaction object that implements the JTA TransactionManager interface too (i.e.
void	setAutodetectTransactionSynchronizationRegistry(boolean autodetectTransactionSynchronizationRegistry) Set whether to autodetect a JTA 1.1 TransactionSynchronizationRegistry object at its default JDNI location ("java:comp/TransactionSynchronizationRegistry") if the UserTransaction has also been obtained from JNDI, and also whether to fall back to checking whether the JTA UserTransaction/TransactionManager object implements the JTA TransactionSynchronizationRegistry interface too.
void	setAutodetectUserTransaction(boolean autodetectUserTransaction) Set whether to autodetect the JTA UserTransaction at its default JNDI location "java:comp/UserTransaction", as specified by Java EE.
void	setCacheUserTransaction(boolean cacheUserTransaction) Set whether to cache the JTA UserTransaction object fetched from JNDI.
void	setJndiEnvironment(Properties jndiEnvironment) Set the JNDI environment to use for JNDI lookups.
void	setJndiTemplate(JndiTemplate jndiTemplate) Set the JndiTemplate to use for JNDI lookups.
void	setTransactionManager(TransactionManager transactionManager) Set the JTA TransactionManager to use as direct reference.
void	setTransactionManagerName(String transactionManagerName) Set the JNDI name of the JTA TransactionManager.
void	setTransactionSynchronizationRegistry(TransactionSynchronizationRegistry transactionSynchronizationRegistry) Set the JTA 1.1 TransactionSynchronizationRegistry to use as direct reference.
void	setTransactionSynchronizationRegistryName(String transactionSynchronizationRegistryName) Set the JNDI name of the JTA 1.1 TransactionSynchronizationRegistry.
void	setUserTransaction(UserTransaction userTransaction) Set the JTA UserTransaction to use as direct reference.
void	setUserTransactionName(String userTransactionName) Set the JNDI name of the JTA UserTransaction.
protected boolean	shouldCommitOnGlobalRollbackOnly() This implementation returns "true": a JTA commit will properly handle transactions that have been marked rollback-only at a global level.
boolean	supportsResourceAdapterManagedTransactions() Determine whether the underlying transaction manager supports XA transactions managed by a resource adapter (i.e.
protected boolean	useSavepointForNestedTransaction() This implementation returns false to cause a further invocation of doBegin despite an already existing transaction.

Methods inherited from class org.springframework.transaction.support.AbstractPlatformTransactionManager

commit, determineTimeout, getDefaultTimeout, getTransaction, getTransactionSynchronization, invokeAfterCompletion, isFailEarlyOnGlobalRollbackOnly, isGlobalRollbackOnParticipationFailure, isNestedTransactionAllowed, isRollbackOnCommitFailure, isValidateExistingTransaction, newTransactionStatus, prepareForCommit, prepareSynchronization, prepareTransactionStatus, resume, rollback, setDefaultTimeout, setFailEarlyOnGlobalRollbackOnly, setGlobalRollbackOnParticipationFailure, setNestedTransactionAllowed, setRollbackOnCommitFailure, setTransactionSynchronization, setTransactionSynchronizationName, setValidateExistingTransaction, suspend, triggerBeforeCommit, triggerBeforeCompletion

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Field Detail

DEFAULT_USER_TRANSACTION_NAME

public static final String DEFAULT_USER_TRANSACTION_NAME

Default JNDI location for the JTA UserTransaction. Many Java EE servers also provide support for the JTA TransactionManager interface there.

See Also:

setUserTransactionName(java.lang.String), setAutodetectTransactionManager(boolean), Constant Field Values

FALLBACK_TRANSACTION_MANAGER_NAMES

public static final String[] FALLBACK_TRANSACTION_MANAGER_NAMES

Fallback JNDI locations for the JTA TransactionManager. Applied if the JTA UserTransaction does not implement the JTA TransactionManager interface, provided that the "autodetectTransactionManager" flag is "true".

See Also:

setTransactionManagerName(java.lang.String), setAutodetectTransactionManager(boolean)

DEFAULT_TRANSACTION_SYNCHRONIZATION_REGISTRY_NAME

public static final String DEFAULT_TRANSACTION_SYNCHRONIZATION_REGISTRY_NAME

Standard Java EE 5 JNDI location for the JTA TransactionSynchronizationRegistry. Autodetected when available.

See Also:

Constant Field Values

Constructor Detail

JtaTransactionManager

public JtaTransactionManager()

Create a new JtaTransactionManager instance, to be configured as bean. Invoke afterPropertiesSet to activate the configuration.

See Also:

setUserTransactionName(java.lang.String), setUserTransaction(javax.transaction.UserTransaction), setTransactionManagerName(java.lang.String), setTransactionManager(javax.transaction.TransactionManager), afterPropertiesSet()

JtaTransactionManager

public JtaTransactionManager(UserTransaction userTransaction)

Create a new JtaTransactionManager instance.

Parameters:

userTransaction - the JTA UserTransaction to use as direct reference

JtaTransactionManager

public JtaTransactionManager(UserTransaction userTransaction,
                             TransactionManager transactionManager)

Create a new JtaTransactionManager instance.

Parameters:

userTransaction - the JTA UserTransaction to use as direct reference

transactionManager - the JTA TransactionManager to use as direct reference

JtaTransactionManager

public JtaTransactionManager(TransactionManager transactionManager)

Create a new JtaTransactionManager instance.

Parameters:

transactionManager - the JTA TransactionManager to use as direct reference

Method Detail

setJndiTemplate

public void setJndiTemplate(JndiTemplate jndiTemplate)

Set the JndiTemplate to use for JNDI lookups. A default one is used if not set.

getJndiTemplate

public JndiTemplate getJndiTemplate()

Return the JndiTemplate used for JNDI lookups.

setJndiEnvironment

public void setJndiEnvironment(@Nullable
                               Properties jndiEnvironment)

Set the JNDI environment to use for JNDI lookups. Creates a JndiTemplate with the given environment settings.

See Also:

setJndiTemplate(org.springframework.jndi.JndiTemplate)

getJndiEnvironment

@Nullable
public Properties getJndiEnvironment()

Return the JNDI environment to use for JNDI lookups.

setUserTransaction

public void setUserTransaction(@Nullable
                               UserTransaction userTransaction)

Set the JTA UserTransaction to use as direct reference.

Typically just used for local JTA setups; in a Java EE environment, the UserTransaction will always be fetched from JNDI.

See Also:

setUserTransactionName(java.lang.String), setAutodetectUserTransaction(boolean)

getUserTransaction

@Nullable
public UserTransaction getUserTransaction()

Return the JTA UserTransaction that this transaction manager uses.

setUserTransactionName

public void setUserTransactionName(String userTransactionName)

Set the JNDI name of the JTA UserTransaction.

Note that the UserTransaction will be autodetected at the Java EE default location "java:comp/UserTransaction" if not specified explicitly.

See Also:

DEFAULT_USER_TRANSACTION_NAME, setUserTransaction(javax.transaction.UserTransaction), setAutodetectUserTransaction(boolean)

setAutodetectUserTransaction

public void setAutodetectUserTransaction(boolean autodetectUserTransaction)

Set whether to autodetect the JTA UserTransaction at its default JNDI location "java:comp/UserTransaction", as specified by Java EE. Will proceed without UserTransaction if none found.

Default is "true", autodetecting the UserTransaction unless it has been specified explicitly. Turn this flag off to allow for JtaTransactionManager operating against the TransactionManager only, despite a default UserTransaction being available.

See Also:

DEFAULT_USER_TRANSACTION_NAME

setCacheUserTransaction

public void setCacheUserTransaction(boolean cacheUserTransaction)

Set whether to cache the JTA UserTransaction object fetched from JNDI.

Default is "true": UserTransaction lookup will only happen at startup, reusing the same UserTransaction handle for all transactions of all threads. This is the most efficient choice for all application servers that provide a shared UserTransaction object (the typical case).

Turn this flag off to enforce a fresh lookup of the UserTransaction for every transaction. This is only necessary for application servers that return a new UserTransaction for every transaction, keeping state tied to the UserTransaction object itself rather than the current thread.

See Also:

setUserTransactionName(java.lang.String)

setTransactionManager

public void setTransactionManager(@Nullable
                                  TransactionManager transactionManager)

Set the JTA TransactionManager to use as direct reference.

A TransactionManager is necessary for suspending and resuming transactions, as this not supported by the UserTransaction interface.

Note that the TransactionManager will be autodetected if the JTA UserTransaction object implements the JTA TransactionManager interface too, as well as autodetected at various well-known fallback JNDI locations.

See Also:

setTransactionManagerName(java.lang.String), setAutodetectTransactionManager(boolean)

getTransactionManager

@Nullable
public TransactionManager getTransactionManager()

Return the JTA TransactionManager that this transaction manager uses, if any.

setTransactionManagerName

public void setTransactionManagerName(String transactionManagerName)

Set the JNDI name of the JTA TransactionManager.

A TransactionManager is necessary for suspending and resuming transactions, as this not supported by the UserTransaction interface.

Note that the TransactionManager will be autodetected if the JTA UserTransaction object implements the JTA TransactionManager interface too, as well as autodetected at various well-known fallback JNDI locations.

See Also:

setTransactionManager(javax.transaction.TransactionManager), setAutodetectTransactionManager(boolean)

setAutodetectTransactionManager

public void setAutodetectTransactionManager(boolean autodetectTransactionManager)

Set whether to autodetect a JTA UserTransaction object that implements the JTA TransactionManager interface too (i.e. the JNDI location for the TransactionManager is "java:comp/UserTransaction", same as for the UserTransaction). Also checks the fallback JNDI locations "java:comp/TransactionManager" and "java:/TransactionManager". Will proceed without TransactionManager if none found.

Default is "true", autodetecting the TransactionManager unless it has been specified explicitly. Can be turned off to deliberately ignore an available TransactionManager, for example when there are known issues with suspend/resume and any attempt to use REQUIRES_NEW or NOT_SUPPORTED should fail fast.

See Also:

FALLBACK_TRANSACTION_MANAGER_NAMES

setTransactionSynchronizationRegistry

public void setTransactionSynchronizationRegistry(@Nullable
                                                  TransactionSynchronizationRegistry transactionSynchronizationRegistry)

Set the JTA 1.1 TransactionSynchronizationRegistry to use as direct reference.

A TransactionSynchronizationRegistry allows for interposed registration of transaction synchronizations, as an alternative to the regular registration methods on the JTA TransactionManager API. Also, it is an official part of the Java EE 5 platform, in contrast to the JTA TransactionManager itself.

Note that the TransactionSynchronizationRegistry will be autodetected in JNDI and also from the UserTransaction/TransactionManager object if implemented there as well.

See Also:

setTransactionSynchronizationRegistryName(java.lang.String), setAutodetectTransactionSynchronizationRegistry(boolean)

getTransactionSynchronizationRegistry

@Nullable
public TransactionSynchronizationRegistry getTransactionSynchronizationRegistry()

Return the JTA 1.1 TransactionSynchronizationRegistry that this transaction manager uses, if any.

setTransactionSynchronizationRegistryName

public void setTransactionSynchronizationRegistryName(String transactionSynchronizationRegistryName)

Set the JNDI name of the JTA 1.1 TransactionSynchronizationRegistry.

Note that the TransactionSynchronizationRegistry will be autodetected at the Java EE 5 default location "java:comp/TransactionSynchronizationRegistry" if not specified explicitly.

See Also:

DEFAULT_TRANSACTION_SYNCHRONIZATION_REGISTRY_NAME

setAutodetectTransactionSynchronizationRegistry

public void setAutodetectTransactionSynchronizationRegistry(boolean autodetectTransactionSynchronizationRegistry)

Set whether to autodetect a JTA 1.1 TransactionSynchronizationRegistry object at its default JDNI location ("java:comp/TransactionSynchronizationRegistry") if the UserTransaction has also been obtained from JNDI, and also whether to fall back to checking whether the JTA UserTransaction/TransactionManager object implements the JTA TransactionSynchronizationRegistry interface too.

Default is "true", autodetecting the TransactionSynchronizationRegistry unless it has been specified explicitly. Can be turned off to delegate synchronization registration to the regular JTA TransactionManager API.

setAllowCustomIsolationLevels

public void setAllowCustomIsolationLevels(boolean allowCustomIsolationLevels)

Set whether to allow custom isolation levels to be specified.

Default is "false", throwing an exception if a non-default isolation level is specified for a transaction. Turn this flag on if affected resource adapters check the thread-bound transaction context and apply the specified isolation levels individually (e.g. through an IsolationLevelDataSourceAdapter).

See Also:

IsolationLevelDataSourceAdapter, IsolationLevelDataSourceRouter

afterPropertiesSet

public void afterPropertiesSet()
                        throws TransactionSystemException

Initialize the UserTransaction as well as the TransactionManager handle.

Specified by:

afterPropertiesSet in interface InitializingBean

Throws:

TransactionSystemException

See Also:

initUserTransactionAndTransactionManager()

initUserTransactionAndTransactionManager

protected void initUserTransactionAndTransactionManager()
                                                 throws TransactionSystemException

Initialize the UserTransaction as well as the TransactionManager handle.

Throws:

TransactionSystemException - if initialization failed

checkUserTransactionAndTransactionManager

protected void checkUserTransactionAndTransactionManager()
                                                  throws IllegalStateException

Check the UserTransaction as well as the TransactionManager handle, assuming standard JTA requirements.

Throws:

IllegalStateException - if no sufficient handles are available

initTransactionSynchronizationRegistry

protected void initTransactionSynchronizationRegistry()

Initialize the JTA 1.1 TransactionSynchronizationRegistry, if available.

To be called after initUserTransactionAndTransactionManager(), since it may check the UserTransaction and TransactionManager handles.

Throws:

TransactionSystemException - if initialization failed

buildUserTransaction

protected UserTransaction buildUserTransaction(TransactionManager transactionManager)

Build a UserTransaction handle based on the given TransactionManager.

Parameters:

transactionManager - the TransactionManager

Returns:

a corresponding UserTransaction handle

lookupUserTransaction

protected UserTransaction lookupUserTransaction(String userTransactionName)
                                         throws TransactionSystemException

Look up the JTA UserTransaction in JNDI via the configured name.

Called by afterPropertiesSet if no direct UserTransaction reference was set. Can be overridden in subclasses to provide a different UserTransaction object.

Parameters:

userTransactionName - the JNDI name of the UserTransaction

Returns:

the UserTransaction object

Throws:

TransactionSystemException - if the JNDI lookup failed

See Also:

setJndiTemplate(org.springframework.jndi.JndiTemplate), setUserTransactionName(java.lang.String)

lookupTransactionManager

protected TransactionManager lookupTransactionManager(String transactionManagerName)
                                               throws TransactionSystemException

Look up the JTA TransactionManager in JNDI via the configured name.

Called by afterPropertiesSet if no direct TransactionManager reference was set. Can be overridden in subclasses to provide a different TransactionManager object.

Parameters:

transactionManagerName - the JNDI name of the TransactionManager

Returns:

the UserTransaction object

Throws:

TransactionSystemException - if the JNDI lookup failed

See Also:

setJndiTemplate(org.springframework.jndi.JndiTemplate), setTransactionManagerName(java.lang.String)

lookupTransactionSynchronizationRegistry

protected TransactionSynchronizationRegistry lookupTransactionSynchronizationRegistry(String registryName)
                                                                               throws TransactionSystemException

Look up the JTA 1.1 TransactionSynchronizationRegistry in JNDI via the configured name.

Can be overridden in subclasses to provide a different TransactionManager object.

Parameters:

registryName - the JNDI name of the TransactionSynchronizationRegistry

Returns:

the TransactionSynchronizationRegistry object

Throws:

TransactionSystemException - if the JNDI lookup failed

See Also:

setJndiTemplate(org.springframework.jndi.JndiTemplate), setTransactionSynchronizationRegistryName(java.lang.String)

retrieveUserTransaction

@Nullable
protected UserTransaction retrieveUserTransaction()
                                                     throws TransactionSystemException

Allows subclasses to retrieve the JTA UserTransaction in a vendor-specific manner. Only called if no "userTransaction" or "userTransactionName" specified.

The default implementation simply returns null.

Returns:

the JTA UserTransaction handle to use, or null if none found

Throws:

TransactionSystemException - in case of errors

See Also:

setUserTransaction(javax.transaction.UserTransaction), setUserTransactionName(java.lang.String)

retrieveTransactionManager

@Nullable
protected TransactionManager retrieveTransactionManager()
                                                           throws TransactionSystemException

Allows subclasses to retrieve the JTA TransactionManager in a vendor-specific manner. Only called if no "transactionManager" or "transactionManagerName" specified.

The default implementation simply returns null.

Returns:

the JTA TransactionManager handle to use, or null if none found

Throws:

TransactionSystemException - in case of errors

See Also:

setTransactionManager(javax.transaction.TransactionManager), setTransactionManagerName(java.lang.String)

retrieveTransactionSynchronizationRegistry

@Nullable
protected TransactionSynchronizationRegistry retrieveTransactionSynchronizationRegistry()
                                                                                           throws TransactionSystemException

Allows subclasses to retrieve the JTA 1.1 TransactionSynchronizationRegistry in a vendor-specific manner.

The default implementation simply returns null.

Returns:

the JTA TransactionSynchronizationRegistry handle to use, or null if none found

Throws:

TransactionSystemException - in case of errors

findUserTransaction

@Nullable
protected UserTransaction findUserTransaction()

Find the JTA UserTransaction through a default JNDI lookup: "java:comp/UserTransaction".

Returns:

the JTA UserTransaction reference, or null if not found

See Also:

DEFAULT_USER_TRANSACTION_NAME

findTransactionManager

@Nullable
protected TransactionManager findTransactionManager(@Nullable
                                                              UserTransaction ut)

Find the JTA TransactionManager through autodetection: checking whether the UserTransaction object implements the TransactionManager, and checking the fallback JNDI locations.

Parameters:

ut - the JTA UserTransaction object

Returns:

the JTA TransactionManager reference, or null if not found

See Also:

FALLBACK_TRANSACTION_MANAGER_NAMES

findTransactionSynchronizationRegistry

@Nullable
protected TransactionSynchronizationRegistry findTransactionSynchronizationRegistry(@Nullable
                                                                                              UserTransaction ut,
                                                                                              @Nullable
                                                                                              TransactionManager tm)
                                                                                       throws TransactionSystemException

Find the JTA 1.1 TransactionSynchronizationRegistry through autodetection: checking whether the UserTransaction object or TransactionManager object implements it, and checking Java EE 5's standard JNDI location.

The default implementation simply returns null.

Parameters:

ut - the JTA UserTransaction object

tm - the JTA TransactionManager object

Returns:

the JTA TransactionSynchronizationRegistry handle to use, or null if none found

Throws:

TransactionSystemException - in case of errors

doGetTransaction

protected Object doGetTransaction()

This implementation returns a JtaTransactionObject instance for the JTA UserTransaction.

The UserTransaction object will either be looked up freshly for the current transaction, or the cached one looked up at startup will be used. The latter is the default: Most application servers use a shared singleton UserTransaction that can be cached. Turn off the "cacheUserTransaction" flag to enforce a fresh lookup for every transaction.

Specified by:

doGetTransaction in class AbstractPlatformTransactionManager

Returns:

the current transaction object

See Also:

setCacheUserTransaction(boolean)

doGetJtaTransaction

protected JtaTransactionObject doGetJtaTransaction(UserTransaction ut)

Get a JTA transaction object for the given current UserTransaction.

Subclasses can override this to provide a JtaTransactionObject subclass, for example holding some additional JTA handle needed.

Parameters:

ut - the UserTransaction handle to use for the current transaction

Returns:

the JtaTransactionObject holding the UserTransaction

isExistingTransaction

protected boolean isExistingTransaction(Object transaction)

Description copied from class: AbstractPlatformTransactionManager

Check if the given transaction object indicates an existing transaction (that is, a transaction which has already started).

The result will be evaluated according to the specified propagation behavior for the new transaction. An existing transaction might get suspended (in case of PROPAGATION_REQUIRES_NEW), or the new transaction might participate in the existing one (in case of PROPAGATION_REQUIRED).

The default implementation returns false, assuming that participating in existing transactions is generally not supported. Subclasses are of course encouraged to provide such support.

Overrides:

isExistingTransaction in class AbstractPlatformTransactionManager

Parameters:

transaction - transaction object returned by doGetTransaction

Returns:

if there is an existing transaction

See Also:

AbstractPlatformTransactionManager.doGetTransaction()

useSavepointForNestedTransaction

protected boolean useSavepointForNestedTransaction()

This implementation returns false to cause a further invocation of doBegin despite an already existing transaction.

JTA implementations might support nested transactions via further UserTransaction.begin() invocations, but never support savepoints.

Overrides:

useSavepointForNestedTransaction in class AbstractPlatformTransactionManager

See Also:

doBegin(java.lang.Object, org.springframework.transaction.TransactionDefinition), UserTransaction.begin()

doBegin

protected void doBegin(Object transaction,
                       TransactionDefinition definition)

Description copied from class: AbstractPlatformTransactionManager

Begin a new transaction with semantics according to the given transaction definition. Does not have to care about applying the propagation behavior, as this has already been handled by this abstract manager.

This method gets called when the transaction manager has decided to actually start a new transaction. Either there wasn't any transaction before, or the previous transaction has been suspended.

A special scenario is a nested transaction without savepoint: If useSavepointForNestedTransaction() returns "false", this method will be called to start a nested transaction when necessary. In such a context, there will be an active transaction: The implementation of this method has to detect this and start an appropriate nested transaction.

Specified by:

doBegin in class AbstractPlatformTransactionManager

Parameters:

transaction - transaction object returned by doGetTransaction

definition - a TransactionDefinition instance, describing propagation behavior, isolation level, read-only flag, timeout, and transaction name

doJtaBegin

protected void doJtaBegin(JtaTransactionObject txObject,
                          TransactionDefinition definition)
                   throws NotSupportedException,
                          SystemException

Perform a JTA begin on the JTA UserTransaction or TransactionManager.

This implementation only supports standard JTA functionality: that is, no per-transaction isolation levels and no transaction names. Can be overridden in subclasses, for specific JTA implementations.

Calls applyIsolationLevel and applyTimeout before invoking the UserTransaction's begin method.

Parameters:

txObject - the JtaTransactionObject containing the UserTransaction

definition - the TransactionDefinition instance, describing propagation behavior, isolation level, read-only flag, timeout, and transaction name

Throws:

NotSupportedException - if thrown by JTA methods

SystemException - if thrown by JTA methods

See Also:

getUserTransaction(), getTransactionManager(), applyIsolationLevel(org.springframework.transaction.jta.JtaTransactionObject, int), applyTimeout(org.springframework.transaction.jta.JtaTransactionObject, int), JtaTransactionObject.getUserTransaction(), UserTransaction.setTransactionTimeout(int), UserTransaction.begin()

applyIsolationLevel

protected void applyIsolationLevel(JtaTransactionObject txObject,
                                   int isolationLevel)
                            throws InvalidIsolationLevelException,
                                   SystemException

Apply the given transaction isolation level. The default implementation will throw an exception for any level other than ISOLATION_DEFAULT.

To be overridden in subclasses for specific JTA implementations, as alternative to overriding the full doJtaBegin(org.springframework.transaction.jta.JtaTransactionObject, org.springframework.transaction.TransactionDefinition) method.

Parameters:

txObject - the JtaTransactionObject containing the UserTransaction

isolationLevel - isolation level taken from transaction definition

Throws:

InvalidIsolationLevelException - if the given isolation level cannot be applied

SystemException - if thrown by the JTA implementation

See Also:

doJtaBegin(org.springframework.transaction.jta.JtaTransactionObject, org.springframework.transaction.TransactionDefinition), JtaTransactionObject.getUserTransaction(), getTransactionManager()

applyTimeout

protected void applyTimeout(JtaTransactionObject txObject,
                            int timeout)
                     throws SystemException

Apply the given transaction timeout. The default implementation will call UserTransaction.setTransactionTimeout for a non-default timeout value.

Parameters:

txObject - the JtaTransactionObject containing the UserTransaction

timeout - timeout value taken from transaction definition

Throws:

SystemException - if thrown by the JTA implementation

See Also:

doJtaBegin(org.springframework.transaction.jta.JtaTransactionObject, org.springframework.transaction.TransactionDefinition), JtaTransactionObject.getUserTransaction(), UserTransaction.setTransactionTimeout(int)

doSuspend

protected Object doSuspend(Object transaction)

Description copied from class: AbstractPlatformTransactionManager

Suspend the resources of the current transaction. Transaction synchronization will already have been suspended.

The default implementation throws a TransactionSuspensionNotSupportedException, assuming that transaction suspension is generally not supported.

Overrides:

doSuspend in class AbstractPlatformTransactionManager

Parameters:

transaction - transaction object returned by doGetTransaction

Returns:

an object that holds suspended resources (will be kept unexamined for passing it into doResume)

See Also:

AbstractPlatformTransactionManager.doResume(java.lang.Object, java.lang.Object)

doJtaSuspend

protected Object doJtaSuspend(JtaTransactionObject txObject)
                       throws SystemException

Perform a JTA suspend on the JTA TransactionManager.

Can be overridden in subclasses, for specific JTA implementations.

Parameters:

txObject - the JtaTransactionObject containing the UserTransaction

Returns:

the suspended JTA Transaction object

Throws:

SystemException - if thrown by JTA methods

See Also:

getTransactionManager(), TransactionManager.suspend()

doResume

protected void doResume(@Nullable
                        Object transaction,
                        Object suspendedResources)

Description copied from class: AbstractPlatformTransactionManager

Resume the resources of the current transaction. Transaction synchronization will be resumed afterwards.

The default implementation throws a TransactionSuspensionNotSupportedException, assuming that transaction suspension is generally not supported.

Overrides:

doResume in class AbstractPlatformTransactionManager

Parameters:

transaction - transaction object returned by doGetTransaction

suspendedResources - the object that holds suspended resources, as returned by doSuspend

See Also:

AbstractPlatformTransactionManager.doSuspend(java.lang.Object)

doJtaResume

protected void doJtaResume(@Nullable
                           JtaTransactionObject txObject,
                           Object suspendedTransaction)
                    throws InvalidTransactionException,
                           SystemException

Perform a JTA resume on the JTA TransactionManager.

Can be overridden in subclasses, for specific JTA implementations.

Parameters:

txObject - the JtaTransactionObject containing the UserTransaction

suspendedTransaction - the suspended JTA Transaction object

Throws:

InvalidTransactionException - if thrown by JTA methods

SystemException - if thrown by JTA methods

See Also:

getTransactionManager(), TransactionManager.resume(javax.transaction.Transaction)

shouldCommitOnGlobalRollbackOnly

protected boolean shouldCommitOnGlobalRollbackOnly()

This implementation returns "true": a JTA commit will properly handle transactions that have been marked rollback-only at a global level.

Overrides:

shouldCommitOnGlobalRollbackOnly in class AbstractPlatformTransactionManager

See Also:

AbstractPlatformTransactionManager.doCommit(org.springframework.transaction.support.DefaultTransactionStatus), DefaultTransactionStatus.isGlobalRollbackOnly(), AbstractTransactionStatus.isLocalRollbackOnly(), TransactionStatus.setRollbackOnly(), UnexpectedRollbackException, UserTransaction.commit(), RollbackException

doCommit

protected void doCommit(DefaultTransactionStatus status)

Description copied from class: AbstractPlatformTransactionManager

Perform an actual commit of the given transaction.

An implementation does not need to check the "new transaction" flag or the rollback-only flag; this will already have been handled before. Usually, a straight commit will be performed on the transaction object contained in the passed-in status.

Specified by:

doCommit in class AbstractPlatformTransactionManager

Parameters:

status - the status representation of the transaction

See Also:

DefaultTransactionStatus.getTransaction()

doRollback

protected void doRollback(DefaultTransactionStatus status)

Description copied from class: AbstractPlatformTransactionManager

Perform an actual rollback of the given transaction.

An implementation does not need to check the "new transaction" flag; this will already have been handled before. Usually, a straight rollback will be performed on the transaction object contained in the passed-in status.

Specified by:

doRollback in class AbstractPlatformTransactionManager

Parameters:

status - the status representation of the transaction

See Also:

DefaultTransactionStatus.getTransaction()

doSetRollbackOnly

protected void doSetRollbackOnly(DefaultTransactionStatus status)

Description copied from class: AbstractPlatformTransactionManager

Set the given transaction rollback-only. Only called on rollback if the current transaction participates in an existing one.

The default implementation throws an IllegalTransactionStateException, assuming that participating in existing transactions is generally not supported. Subclasses are of course encouraged to provide such support.

Overrides:

doSetRollbackOnly in class AbstractPlatformTransactionManager

Parameters:

status - the status representation of the transaction

registerAfterCompletionWithExistingTransaction

protected void registerAfterCompletionWithExistingTransaction(Object transaction,
                                                              List<TransactionSynchronization> synchronizations)

Description copied from class: AbstractPlatformTransactionManager

Register the given list of transaction synchronizations with the existing transaction.

Invoked when the control of the Spring transaction manager and thus all Spring transaction synchronizations end, without the transaction being completed yet. This is for example the case when participating in an existing JTA or EJB CMT transaction.

The default implementation simply invokes the afterCompletion methods immediately, passing in "STATUS_UNKNOWN". This is the best we can do if there's no chance to determine the actual outcome of the outer transaction.

Overrides:

registerAfterCompletionWithExistingTransaction in class AbstractPlatformTransactionManager

Parameters:

transaction - transaction object returned by doGetTransaction

synchronizations - a List of TransactionSynchronization objects

See Also:

AbstractPlatformTransactionManager.invokeAfterCompletion(java.util.List, int), TransactionSynchronization.afterCompletion(int), TransactionSynchronization.STATUS_UNKNOWN

doRegisterAfterCompletionWithJtaTransaction

protected void doRegisterAfterCompletionWithJtaTransaction(JtaTransactionObject txObject,
                                                           List<TransactionSynchronization> synchronizations)
                                                    throws RollbackException,
                                                           SystemException

Register a JTA synchronization on the JTA TransactionManager, for calling afterCompletion on the given Spring TransactionSynchronizations.

The default implementation registers the synchronizations on the JTA 1.1 TransactionSynchronizationRegistry, if available, or on the JTA TransactionManager's current Transaction - again, if available. If none of the two is available, a warning will be logged.

Can be overridden in subclasses, for specific JTA implementations.

Parameters:

txObject - the current transaction object

synchronizations - a List of TransactionSynchronization objects

Throws:

RollbackException - if thrown by JTA methods

SystemException - if thrown by JTA methods

See Also:

getTransactionManager(), Transaction.registerSynchronization(javax.transaction.Synchronization), TransactionSynchronizationRegistry.registerInterposedSynchronization(javax.transaction.Synchronization)

doCleanupAfterCompletion

protected void doCleanupAfterCompletion(Object transaction)

Description copied from class: AbstractPlatformTransactionManager

Cleanup resources after transaction completion.

Called after doCommit and doRollback execution, on any outcome. The default implementation does nothing.

Should not throw any exceptions but just issue warnings on errors.

Overrides:

doCleanupAfterCompletion in class AbstractPlatformTransactionManager

Parameters:

transaction - transaction object returned by doGetTransaction

createTransaction

public Transaction createTransaction(@Nullable
                                     String name,
                                     int timeout)
                              throws NotSupportedException,
                                     SystemException

Description copied from interface: TransactionFactory

Create an active Transaction object based on the given name and timeout.

Specified by:

createTransaction in interface TransactionFactory

Parameters:

name - the transaction name (may be null)

timeout - the transaction timeout (may be -1 for the default timeout)

Returns:

the active Transaction object (never null)

Throws:

NotSupportedException - if the transaction manager does not support a transaction of the specified type

SystemException - if the transaction manager failed to create the transaction

supportsResourceAdapterManagedTransactions

public boolean supportsResourceAdapterManagedTransactions()

Description copied from interface: TransactionFactory

Determine whether the underlying transaction manager supports XA transactions managed by a resource adapter (i.e. without explicit XA resource enlistment).

Typically false. Checked by AbstractMessageEndpointFactory in order to differentiate between invalid configuration and valid ResourceAdapter-managed transactions.

Specified by:

supportsResourceAdapterManagedTransactions in interface TransactionFactory

See Also:

ResourceAdapter.endpointActivation(javax.resource.spi.endpoint.MessageEndpointFactory, javax.resource.spi.ActivationSpec), MessageEndpointFactory.isDeliveryTransacted(java.lang.reflect.Method)