org.springframework.web.servlet.view

Class UrlBasedViewResolver

java.lang.Object

org.springframework.context.support.ApplicationObjectSupport

org.springframework.web.context.support.WebApplicationObjectSupport

org.springframework.web.servlet.view.AbstractCachingViewResolver

org.springframework.web.servlet.view.UrlBasedViewResolver

All Implemented Interfaces:

Aware, ApplicationContextAware, Ordered, ServletContextAware, ViewResolver

Direct Known Subclasses:

AbstractTemplateViewResolver, InternalResourceViewResolver, ScriptTemplateViewResolver, TilesViewResolver, XsltViewResolver

public class UrlBasedViewResolver
extends AbstractCachingViewResolver
implements Ordered

Simple implementation of the ViewResolver interface, allowing for direct resolution of symbolic view names to URLs, without explicit mapping definitions. This is useful if your symbolic names match the names of your view resources in a straightforward manner (i.e. the symbolic name is the unique part of the resource's filename), without the need for a dedicated mapping to be defined for each view.

Supports AbstractUrlBasedView subclasses like InternalResourceView and FreeMarkerView. The view class for all views generated by this resolver can be specified via the "viewClass" property.

View names can either be resource URLs themselves, or get augmented by a specified prefix and/or suffix. Exporting an attribute that holds the RequestContext to all views is explicitly supported.

Example: prefix="/WEB-INF/jsp/", suffix=".jsp", viewname="test" -> "/WEB-INF/jsp/test.jsp"

As a special feature, redirect URLs can be specified via the "redirect:" prefix. E.g.: "redirect:myAction" will trigger a redirect to the given URL, rather than resolution as standard view name. This is typically used for redirecting to a controller URL after finishing a form workflow.

Furthermore, forward URLs can be specified via the "forward:" prefix. E.g.: "forward:myAction" will trigger a forward to the given URL, rather than resolution as standard view name. This is typically used for controller URLs; it is not supposed to be used for JSP URLs - use logical view names there.

Note: This class does not support localized resolution, i.e. resolving a symbolic view name to different resources depending on the current locale.

Note: When chaining ViewResolvers, a UrlBasedViewResolver will check whether the specified resource actually exists. However, with InternalResourceView, it is not generally possible to determine the existence of the target resource upfront. In such a scenario, a UrlBasedViewResolver will always return a View for any given view name; as a consequence, it should be configured as the last ViewResolver in the chain.

Since:

13.12.2003

Author:

Juergen Hoeller, Rob Harrop, Sam Brannen

See Also:

setViewClass(java.lang.Class<?>), setPrefix(java.lang.String), setSuffix(java.lang.String), setRequestContextAttribute(java.lang.String), REDIRECT_URL_PREFIX, AbstractUrlBasedView, InternalResourceView, FreeMarkerView

Nested Class Summary

Nested classes/interfaces inherited from class org.springframework.web.servlet.view.AbstractCachingViewResolver

AbstractCachingViewResolver.CacheFilter

Field Summary

Fields

Modifier and Type	Field and Description
static String	FORWARD_URL_PREFIX Prefix for special view names that specify a forward URL (usually to a controller after a form has been submitted and processed).
static String	REDIRECT_URL_PREFIX Prefix for special view names that specify a redirect URL (usually to a controller after a form has been submitted and processed).

Fields inherited from class org.springframework.web.servlet.view.AbstractCachingViewResolver

DEFAULT_CACHE_LIMIT

Fields inherited from class org.springframework.context.support.ApplicationObjectSupport

logger

Fields inherited from interface org.springframework.core.Ordered

HIGHEST_PRECEDENCE, LOWEST_PRECEDENCE

Constructor Summary

Constructors

Constructor and Description
UrlBasedViewResolver()

Method Summary

Modifier and Type	Method and Description
protected View	applyLifecycleMethods(String viewName, AbstractUrlBasedView view) Apply the containing ApplicationContext's lifecycle methods to the given View instance, if such a context is available.
protected AbstractUrlBasedView	buildView(String viewName) Creates a new View instance of the specified view class and configures it.
protected boolean	canHandle(String viewName, Locale locale) Indicates whether or not this ViewResolver can handle the supplied view name.
protected View	createView(String viewName, Locale locale) Overridden to implement check for "redirect:" prefix.
Map<String,Object>	getAttributesMap() Allow Map access to the static attributes for views returned by this resolver, with the option to add or override specific entries.
protected Object	getCacheKey(String viewName, Locale locale) This implementation returns just the view name, as this ViewResolver doesn't support localized resolution.
protected String	getContentType() Return the content type for all views, if any.
protected Boolean	getExposeContextBeansAsAttributes()
protected String[]	getExposedContextBeanNames()
protected Boolean	getExposePathVariables() Return whether views resolved by this resolver should add path variables to the model or not.
int	getOrder() Get the order value of this object.
protected String	getPrefix() Return the prefix that gets prepended to view names when building a URL.
String[]	getRedirectHosts() Return the configured application hosts for redirect purposes.
protected String	getRequestContextAttribute() Return the name of the RequestContext attribute for all views, if any.
protected String	getSuffix() Return the suffix that gets appended to view names when building a URL.
protected Class<?>	getViewClass() Return the view class to be used to create views.
protected String[]	getViewNames() Return the view names (or name patterns) that can be handled by this ViewResolver.
protected void	initApplicationContext() Subclasses can override this for custom initialization behavior.
protected AbstractUrlBasedView	instantiateView() Instantiate the specified view class.
protected boolean	isRedirectContextRelative() Return whether to interpret a given redirect URL that starts with a slash ("/") as relative to the current ServletContext, i.e.
protected boolean	isRedirectHttp10Compatible() Return whether redirects should stay compatible with HTTP 1.0 clients.
protected View	loadView(String viewName, Locale locale) Delegates to buildView for creating a new instance of the specified view class.
protected Class<?>	requiredViewClass() Return the required type of view for this resolver.
void	setAttributes(Properties props) Set static attributes from a java.util.Properties object, for all views returned by this resolver.
void	setAttributesMap(Map<String,?> attributes) Set static attributes from a Map, for all views returned by this resolver.
void	setContentType(String contentType) Set the content type for all views.
void	setExposeContextBeansAsAttributes(boolean exposeContextBeansAsAttributes) Set whether to make all Spring beans in the application context accessible as request attributes, through lazy checking once an attribute gets accessed.
void	setExposedContextBeanNames(String... exposedContextBeanNames) Specify the names of beans in the context which are supposed to be exposed.
void	setExposePathVariables(Boolean exposePathVariables) Specify whether views resolved by this resolver should add path variables to the model or not.
void	setOrder(int order) Specify the order value for this ViewResolver bean.
void	setPrefix(String prefix) Set the prefix that gets prepended to view names when building a URL.
void	setRedirectContextRelative(boolean redirectContextRelative) Set whether to interpret a given redirect URL that starts with a slash ("/") as relative to the current ServletContext, i.e.
void	setRedirectHosts(String... redirectHosts) Configure one or more hosts associated with the application.
void	setRedirectHttp10Compatible(boolean redirectHttp10Compatible) Set whether redirects should stay compatible with HTTP 1.0 clients.
void	setRequestContextAttribute(String requestContextAttribute) Set the name of the RequestContext attribute for all views.
void	setSuffix(String suffix) Set the suffix that gets appended to view names when building a URL.
void	setViewClass(Class<?> viewClass) Set the view class that should be used to create views.
void	setViewNames(String... viewNames) Set the view names (or name patterns) that can be handled by this ViewResolver.

Methods inherited from class org.springframework.web.servlet.view.AbstractCachingViewResolver

clearCache, getCacheFilter, getCacheLimit, isCache, isCacheUnresolved, removeFromCache, resolveViewName, setCache, setCacheFilter, setCacheLimit, setCacheUnresolved

Methods inherited from class org.springframework.web.context.support.WebApplicationObjectSupport

getServletContext, getTempDir, getWebApplicationContext, initApplicationContext, initServletContext, isContextRequired, setServletContext

Methods inherited from class org.springframework.context.support.ApplicationObjectSupport

getApplicationContext, getMessageSourceAccessor, obtainApplicationContext, requiredContextClass, setApplicationContext

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Field Detail

REDIRECT_URL_PREFIX

public static final String REDIRECT_URL_PREFIX

Prefix for special view names that specify a redirect URL (usually to a controller after a form has been submitted and processed). Such view names will not be resolved in the configured default way but rather be treated as special shortcut.

See Also:

Constant Field Values

FORWARD_URL_PREFIX

public static final String FORWARD_URL_PREFIX

Prefix for special view names that specify a forward URL (usually to a controller after a form has been submitted and processed). Such view names will not be resolved in the configured default way but rather be treated as special shortcut.

See Also:

Constant Field Values

Constructor Detail

UrlBasedViewResolver

public UrlBasedViewResolver()

Method Detail

setViewClass

public void setViewClass(@Nullable
                         Class<?> viewClass)

Set the view class that should be used to create views.

Parameters:

viewClass - a class that is assignable to the required view class (by default: AbstractUrlBasedView)

See Also:

requiredViewClass(), instantiateView(), AbstractUrlBasedView

getViewClass

@Nullable
protected Class<?> getViewClass()

Return the view class to be used to create views.

See Also:

setViewClass(java.lang.Class<?>)

setPrefix

public void setPrefix(@Nullable
                      String prefix)

Set the prefix that gets prepended to view names when building a URL.

getPrefix

protected String getPrefix()

Return the prefix that gets prepended to view names when building a URL.

setSuffix

public void setSuffix(@Nullable
                      String suffix)

Set the suffix that gets appended to view names when building a URL.

getSuffix

protected String getSuffix()

Return the suffix that gets appended to view names when building a URL.

setContentType

public void setContentType(@Nullable
                           String contentType)

Set the content type for all views.

May be ignored by view classes if the view itself is assumed to set the content type, e.g. in case of JSPs.

getContentType

@Nullable
protected String getContentType()

Return the content type for all views, if any.

setRedirectContextRelative

public void setRedirectContextRelative(boolean redirectContextRelative)

Set whether to interpret a given redirect URL that starts with a slash ("/") as relative to the current ServletContext, i.e. as relative to the web application root.

Default is "true": A redirect URL that starts with a slash will be interpreted as relative to the web application root, i.e. the context path will be prepended to the URL.

Redirect URLs can be specified via the "redirect:" prefix. E.g.: "redirect:myAction"

See Also:

RedirectView.setContextRelative(boolean), REDIRECT_URL_PREFIX

isRedirectContextRelative

protected boolean isRedirectContextRelative()

Return whether to interpret a given redirect URL that starts with a slash ("/") as relative to the current ServletContext, i.e. as relative to the web application root.

setRedirectHttp10Compatible

public void setRedirectHttp10Compatible(boolean redirectHttp10Compatible)

Set whether redirects should stay compatible with HTTP 1.0 clients.

In the default implementation, this will enforce HTTP status code 302 in any case, i.e. delegate to HttpServletResponse.sendRedirect. Turning this off will send HTTP status code 303, which is the correct code for HTTP 1.1 clients, but not understood by HTTP 1.0 clients.

Many HTTP 1.1 clients treat 302 just like 303, not making any difference. However, some clients depend on 303 when redirecting after a POST request; turn this flag off in such a scenario.

Redirect URLs can be specified via the "redirect:" prefix. E.g.: "redirect:myAction"

See Also:

RedirectView.setHttp10Compatible(boolean), REDIRECT_URL_PREFIX

isRedirectHttp10Compatible

protected boolean isRedirectHttp10Compatible()

Return whether redirects should stay compatible with HTTP 1.0 clients.

setRedirectHosts

public void setRedirectHosts(@Nullable
                             String... redirectHosts)

Configure one or more hosts associated with the application. All other hosts will be considered external hosts.

In effect, this property provides a way turn off encoding on redirect via HttpServletResponse.encodeRedirectURL(java.lang.String) for URLs that have a host and that host is not listed as a known host.

If not set (the default) all URLs are encoded through the response.

Parameters:

redirectHosts - one or more application hosts

Since:

4.3

getRedirectHosts

@Nullable
public String[] getRedirectHosts()

Return the configured application hosts for redirect purposes.

Since:

4.3

setRequestContextAttribute

public void setRequestContextAttribute(@Nullable
                                       String requestContextAttribute)

Set the name of the RequestContext attribute for all views.

Parameters:

requestContextAttribute - name of the RequestContext attribute

See Also:

AbstractView.setRequestContextAttribute(java.lang.String)

getRequestContextAttribute

@Nullable
protected String getRequestContextAttribute()

Return the name of the RequestContext attribute for all views, if any.

setAttributes

public void setAttributes(Properties props)

Set static attributes from a java.util.Properties object, for all views returned by this resolver.

This is the most convenient way to set static attributes. Note that static attributes can be overridden by dynamic attributes, if a value with the same name is included in the model.

Can be populated with a String "value" (parsed via PropertiesEditor) or a "props" element in XML bean definitions.

See Also:

PropertiesEditor, AbstractView.setAttributes(java.util.Properties)

setAttributesMap

public void setAttributesMap(@Nullable
                             Map<String,?> attributes)

Set static attributes from a Map, for all views returned by this resolver. This allows to set any kind of attribute values, for example bean references.

Can be populated with a "map" or "props" element in XML bean definitions.

Parameters:

attributes - a Map with name Strings as keys and attribute objects as values

See Also:

AbstractView.setAttributesMap(java.util.Map<java.lang.String, ?>)

getAttributesMap

public Map<String,Object> getAttributesMap()

Allow Map access to the static attributes for views returned by this resolver, with the option to add or override specific entries.

Useful for specifying entries directly, for example via "attributesMap[myKey]". This is particularly useful for adding or overriding entries in child view definitions.

setExposePathVariables

public void setExposePathVariables(@Nullable
                                   Boolean exposePathVariables)

Specify whether views resolved by this resolver should add path variables to the model or not.

>The default setting is to let each View decide (see AbstractView.setExposePathVariables(boolean). However, you can use this property to override that.

Parameters:

exposePathVariables -

• true - all Views resolved by this resolver will expose path variables
• false - no Views resolved by this resolver will expose path variables
• null - individual Views can decide for themselves (this is used by the default)

See Also:

AbstractView.setExposePathVariables(boolean)

getExposePathVariables

@Nullable
protected Boolean getExposePathVariables()

Return whether views resolved by this resolver should add path variables to the model or not.

setExposeContextBeansAsAttributes

public void setExposeContextBeansAsAttributes(boolean exposeContextBeansAsAttributes)

Set whether to make all Spring beans in the application context accessible as request attributes, through lazy checking once an attribute gets accessed.

This will make all such beans accessible in plain ${...} expressions in a JSP 2.0 page, as well as in JSTL's c:out value expressions.

Default is "false".

See Also:

AbstractView.setExposeContextBeansAsAttributes(boolean)

getExposeContextBeansAsAttributes

@Nullable
protected Boolean getExposeContextBeansAsAttributes()

setExposedContextBeanNames

public void setExposedContextBeanNames(@Nullable
                                       String... exposedContextBeanNames)

Specify the names of beans in the context which are supposed to be exposed. If this is non-null, only the specified beans are eligible for exposure as attributes.

See Also:

AbstractView.setExposedContextBeanNames(java.lang.String...)

getExposedContextBeanNames

@Nullable
protected String[] getExposedContextBeanNames()

setViewNames

public void setViewNames(@Nullable
                         String... viewNames)

Set the view names (or name patterns) that can be handled by this ViewResolver. View names can contain simple wildcards such that 'my*', '*Report' and '*Repo*' will all match the view name 'myReport'.

See Also:

canHandle(java.lang.String, java.util.Locale)

getViewNames

@Nullable
protected String[] getViewNames()

Return the view names (or name patterns) that can be handled by this ViewResolver.

setOrder

public void setOrder(int order)

Specify the order value for this ViewResolver bean.

The default value is Ordered.LOWEST_PRECEDENCE, meaning non-ordered.

See Also:

Ordered.getOrder()

getOrder

public int getOrder()

Description copied from interface: Ordered

Get the order value of this object.

Higher values are interpreted as lower priority. As a consequence, the object with the lowest value has the highest priority (somewhat analogous to Servlet load-on-startup values).

Same order values will result in arbitrary sort positions for the affected objects.

Specified by:

getOrder in interface Ordered

Returns:

the order value

See Also:

Ordered.HIGHEST_PRECEDENCE, Ordered.LOWEST_PRECEDENCE

initApplicationContext

protected void initApplicationContext()

Description copied from class: ApplicationObjectSupport

Subclasses can override this for custom initialization behavior.

The default implementation is empty. Called by ApplicationObjectSupport.initApplicationContext(org.springframework.context.ApplicationContext).

Overrides:

initApplicationContext in class ApplicationObjectSupport

See Also:

ApplicationObjectSupport.setApplicationContext(org.springframework.context.ApplicationContext)

getCacheKey

protected Object getCacheKey(String viewName,
                             Locale locale)

This implementation returns just the view name, as this ViewResolver doesn't support localized resolution.

Overrides:

getCacheKey in class AbstractCachingViewResolver

createView

protected View createView(String viewName,
                          Locale locale)
                   throws Exception

Overridden to implement check for "redirect:" prefix.

Not possible in loadView, since overridden loadView versions in subclasses might rely on the superclass always creating instances of the required view class.

Overrides:

createView in class AbstractCachingViewResolver

Parameters:

viewName - the name of the view to retrieve

locale - the Locale to retrieve the view for

Returns:

the View instance, or null if not found (optional, to allow for ViewResolver chaining)

Throws:

Exception - if the view couldn't be resolved

See Also:

loadView(java.lang.String, java.util.Locale), requiredViewClass()

canHandle

protected boolean canHandle(String viewName,
                            Locale locale)

Indicates whether or not this ViewResolver can handle the supplied view name. If not, createView(String, java.util.Locale) will return null. The default implementation checks against the configured view names.

Parameters:

viewName - the name of the view to retrieve

locale - the Locale to retrieve the view for

Returns:

whether this resolver applies to the specified view

See Also:

PatternMatchUtils.simpleMatch(String, String)

requiredViewClass

protected Class<?> requiredViewClass()

Return the required type of view for this resolver. This implementation returns AbstractUrlBasedView.

See Also:

instantiateView(), AbstractUrlBasedView

instantiateView

protected AbstractUrlBasedView instantiateView()

Instantiate the specified view class.

The default implementation uses reflection to instantiate the class.

Returns:

a new instance of the view class

Since:

5.3

See Also:

setViewClass(java.lang.Class<?>)

loadView

protected View loadView(String viewName,
                        Locale locale)
                 throws Exception

Delegates to buildView for creating a new instance of the specified view class. Applies the following Spring lifecycle methods (as supported by the generic Spring bean factory):

• ApplicationContextAware's setApplicationContext
• InitializingBean's afterPropertiesSet

Specified by:

loadView in class AbstractCachingViewResolver

Parameters:

viewName - the name of the view to retrieve

locale - the Locale to retrieve the view for

Returns:

the View instance

Throws:

Exception - if the view couldn't be resolved

See Also:

buildView(String), ApplicationContextAware.setApplicationContext(org.springframework.context.ApplicationContext), InitializingBean.afterPropertiesSet()

buildView

protected AbstractUrlBasedView buildView(String viewName)
                                  throws Exception

Creates a new View instance of the specified view class and configures it. Does not perform any lookup for pre-defined View instances.

Spring lifecycle methods as defined by the bean container do not have to be called here; those will be applied by the loadView method after this method returns.

Subclasses will typically call super.buildView(viewName) first, before setting further properties themselves. loadView will then apply Spring lifecycle methods at the end of this process.

Parameters:

viewName - the name of the view to build

Returns:

the View instance

Throws:

Exception - if the view couldn't be resolved

See Also:

loadView(String, java.util.Locale)

applyLifecycleMethods

protected View applyLifecycleMethods(String viewName,
                                     AbstractUrlBasedView view)

Apply the containing ApplicationContext's lifecycle methods to the given View instance, if such a context is available.

Parameters:

viewName - the name of the view

view - the freshly created View instance, pre-configured with AbstractUrlBasedView's properties

Returns:

the View instance to use (either the original one or a decorated variant)

Since:

5.0

See Also:

ApplicationObjectSupport.getApplicationContext(), ApplicationContext.getAutowireCapableBeanFactory(), AutowireCapableBeanFactory.initializeBean(java.lang.Object, java.lang.String)