33. WebSockets Support

33.1 Introduction

Starting with version 4.1 Spring Integration has introduced WebSocket support. It is based on architecture, infrastructure and API from the Spring Framework’s web-socket module. Therefore, many of Spring WebSocket’s components (e.g. SubProtocolHandler or WebSocketClient) and configuration options (e.g. @EnableWebSocketMessageBroker) can be reused within Spring Integration. For more information, please, refer to the Spring Framework WebSocket Support chapter in the Spring Framework reference manual.

[Note]Note

Since the Spring Framework WebSocket infrastructure is based on the Spring Messaging foundation and provides a basic Messaging framework based on the same MessageChannel s, MessageHandler s that Spring Integration uses, and some POJO-method annotation mappings, Spring Integration can be directly involved in a WebSocket flow, even without WebSocket adapters. For this purpose you can simply configure a Spring Integration @MessagingGateway with appropriate annotations:

@MessagingGateway
@Controller
public interface WebSocketGateway {

    @MessageMapping("/greeting")
    @SendToUser("/queue/answer")
    @Gateway(requestChannel = "greetingChannel")
    String greeting(String payload);

}

33.2 Overview

Since the WebSocket protocol is streaming by definition and we can send and receive messages to/from a WebSocket at the same time, we can simply deal with an appropriate WebSocketSession, regardless of being on the client or server side. To encapsulate the connection management and WebSocketSession registry, the IntegrationWebSocketContainer is provided with ClientWebSocketContainer and ServerWebSocketContainer implementations. Thanks to the WebSocket API and its implementation in the Spring Framework, with many extensions, the same classes are used on the server side as well as the client side (from a Java perspective, of course). Hence most connection and WebSocketSession registry options are the same on both sides. That allows us to reuse many configuration items and infrastructure hooks to build WebSocket applications on the server side as well as on the client side:

//Client side
@Bean
public WebSocketClient webSocketClient() {
    return new SockJsClient(Collections.singletonList(new WebSocketTransport(new JettyWebSocketClient())));
}

@Bean
public IntegrationWebSocketContainer clientWebSocketContainer() {
    return new ClientWebSocketContainer(webSocketClient(), "ws://my.server.com/endpoint");
}

//Server side
@Bean
public IntegrationWebSocketContainer serverWebSocketContainer() {
    return new ServerWebSocketContainer("/endpoint").withSockJs();
}

The IntegrationWebSocketContainer is designed to achieve bidirectional messaging and can be shared between Inbound and Outbound Channel Adapters (see below), can be referenced only from one of them (when using one-way - sending or receiving - WebSocket messaging). It can be used without any Channel Adapter, but in this case, IntegrationWebSocketContainer only plays a role as the WebSocketSession registry.

[Note]Note

The ServerWebSocketContainer implements WebSocketConfigurer to register an internal IntegrationWebSocketContainer.IntegrationWebSocketHandler as an Endpoint under the provided paths and other server WebSocket options (such as HandshakeHandler or SockJS fallback) within the ServletWebSocketHandlerRegistry for the target vendor WebSocket Container. This registration is achieved with an infrastructural WebSocketIntegrationConfigurationInitializer component, which does the same as the @EnableWebSocket annotation. This means that using just @EnableIntegration (or any Spring Integration Namespace in the application context) you can omit the @EnableWebSocket declaration, because all WebSocket Endpoints are detected by the Spring Integration infrastructure.

33.3 WebSocket Inbound Channel Adapter

The WebSocketInboundChannelAdapter implements the receiving part of WebSocketSession interaction. It must be supplied with a IntegrationWebSocketContainer, and the adapter registers itself as a WebSocketListener to handle incoming messages and WebSocketSession events.

[Note]Note

Only one WebSocketListener can be registered in the IntegrationWebSocketContainer.

For WebSocket _sub-protocol_s, the WebSocketInboundChannelAdapter can be configured with SubProtocolHandlerRegistry as the second constructor argument. The adapter delegates to the SubProtocolHandlerRegistry to determine the appropriate SubProtocolHandler for the accepted WebSocketSession and to convert WebSocketMessage to a Message according to the sub-protocol implementation.

[Note]Note

By default, the WebSocketInboundChannelAdapter relies just only on the raw PassThruSubProtocolHandler implementation, which simply converts the WebSocketMessage to a Message.

The WebSocketInboundChannelAdapter accepts and sends to the underlying integration flow only Message s with SimpMessageType.MESSAGE or an empty simpMessageType header. All other Message types are handled through the ApplicationEvent s emitted from a SubProtocolHandler implementation (e.g. StompSubProtocolHandler).

On the server side WebSocketInboundChannelAdapter can be configured with the useBroker = true option, if the @EnableWebSocketMessageBroker configuration is present. In this case all non-MESSAGE Message types are delegated to the provided AbstractBrokerMessageHandler. In addition, if the Broker Relay is configured with destination prefixes, those Messages, which match to the Broker destinations, are routed to the AbstractBrokerMessageHandler, instead of to the outputChannel of the WebSocketInboundChannelAdapter.

If useBroker = false and received message is of SimpMessageType.CONNECT type, the WebSocketInboundChannelAdapter sends SimpMessageType.CONNECT_ACK message to the WebSocketSession immediately without sending it to the channel.

[Note]Note

Spring’s WebSocket Support allows the configuration of only one Broker Relay, hence we don’t require an AbstractBrokerMessageHandler reference, it is detected in the Application Context.

For more configuration options see Section 33.5, “WebSockets Namespace Support”.

33.4 WebSocket Outbound Channel Adapter

The WebSocketOutboundChannelAdapter accepts Spring Integration messages from its MessageChannel, determines the WebSocketSession id from the MessageHeaders, retrieves the WebSocketSession from the provided IntegrationWebSocketContainer and delegates the conversion and sending WebSocketMessage work to the appropriate SubProtocolHandler from the provided SubProtocolHandlerRegistry.

On the client side, the WebSocketSession id message header isn’t required, because ClientWebSocketContainer deals only with a single connection and its WebSocketSession respectively.

To use the STOMP sub-protocol, this adapter should be configured with a StompSubProtocolHandler. Then you can send any STOMP message type to this adapter, using StompHeaderAccessor.create(StompCommand...) and a MessageBuilder, or just using a HeaderEnricher (see Section 7.2.2, “Header Enricher”).

For more configuration options see below.

33.5 WebSockets Namespace Support

Spring Integration WebSocket namespace includes several components described below. To include it in your configuration, simply provide the following namespace declaration in your application context configuration file:

<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  xmlns:int="http://www.springframework.org/schema/integration"
  xmlns:int-websocket="http://www.springframework.org/schema/integration/websocket"
  xsi:schemaLocation="
    http://www.springframework.org/schema/beans
    http://www.springframework.org/schema/beans/spring-beans.xsd
    http://www.springframework.org/schema/integration
    http://www.springframework.org/schema/integration/spring-integration.xsd
    http://www.springframework.org/schema/integration/websocket
    http://www.springframework.org/schema/integration/websocket/spring-integration-websocket.xsd">
    ...
</beans>

<int-websocket:client-container>

<int-websocket:client-container
                	id=""  1
                	client=""  2
                	uri=""  3
                	uri-variables=""  4
                	origin=""  5
                	send-time-limit=""  6
                	send-buffer-size-limit=""  7
                	auto-startup=""  8
                	phase="">  9
                <int-websocket:http-headers>
                	<entry key="" value=""/>
                </int-websocket:http-headers>  10
</int-websocket:client-container>

1

The component bean name.

2

The WebSocketClient bean reference.

3

The uri or uriTemplate to the target WebSocket service. If it is used as a uriTemplate with URI variable placeholders, the uri-variables attribute is required.

4

Comma-separated values for the URI variable placeholders within the uri attribute value. The values are replaced into the placeholders according to the order in the uri. See UriComponents.expand(Object... uriVariableValues).

5

The Origin Handshake HTTP header value.

6

The WebSocket session send timeout limit. Defaults to 10000.

7

The WebSocket session send message size limit. Defaults to 524288.

8

Boolean value indicating whether this endpoint should start automatically. Defaults to false, assuming that this container will be started from the Section 33.3, “WebSocket Inbound Channel Adapter”.

9

The lifecycle phase within which this endpoint should start and stop. The lower the value the earlier this endpoint will start and the later it will stop. The default is Integer.MAX_VALUE. Values can be negative. See SmartLifeCycle.

10

A Map of HttpHeaders to be used with the Handshake request.

<int-websocket:server-container>

<int-websocket:server-container
					id=""  1
					path=""  2
					handshake-handler=""  3
					handshake-interceptors=""  4
					decorator-factories=""  5
					send-time-limit=""  6
					send-buffer-size-limit=""  7
					allowed-origins="">  8
				  <int-websocket:sockjs
						client-library-url=""   9
						stream-bytes-limit=""   10
						session-cookie-needed=""   11
						heartbeat-time=""   12
						disconnect-delay=""   13
						message-cache-size=""   14
						websocket-enabled=""   15
						scheduler=""   (16)
						message-codec=""   (17)
						transport-handlers=""  (18)
						suppress-cors="true"="" />  (19)
</int-websocket:server-container>

1

The component bean name.

2

A path (or comma-separated paths) that maps a particular request to a WebSocketHandler. Exact path mapping URIs (such as "/myPath") are supported as well as ant-style path patterns (such as /myPath/**).

3

The HandshakeHandler bean reference. Default to DefaultHandshakeHandler.

4

List of HandshakeInterceptor bean references.

5

Configure one or more factories (WebSocketHandlerDecoratorFactory) to decorate the handler used to process WebSocket messages. This may be useful for some advanced use cases, for example to allow Spring Security to forcibly close the WebSocket session when the corresponding HTTP session expires. See Spring Session Project for more information.

6

See the same option on the <int-websocket:client-container>.

7

See the same option on the <int-websocket:client-container>.

8

Configure allowed Origin header values. Multiple origins may be specified as a comma-separated list. This check is mostly designed for browser clients. There is noting preventing other types of client to modify the Origin header value. When SockJS is enabled and allowed origins are restricted, transport types that do not use Origin headers for cross origin requests (jsonp-polling, iframe-xhr-polling, iframe-eventsource and iframe-htmlfile) are disabled. As a consequence, IE6/IE7 are not supported and IE8/IE9 will only be supported without cookies. By default, all origins are allowed.

9

Transports with no native cross-domain communication (e.g. "eventsource", "htmlfile") must get a simple page from the "foreign" domain in an invisible iframe so that code in the iframe can run from a domain local to the SockJS server. Since the iframe needs to load the SockJS javascript client library, this property allows specifying where to load it from. By default this is set to point to https://d1fxtkz8shb9d2.cloudfront.net/sockjs-0.3.4.min.js. However it can also be set to point to a URL served by the application. Note that it’s possible to specify a relative URL in which case the URL must be relative to the iframe URL. For example assuming a SockJS endpoint mapped to "/sockjs", and resulting iframe URL "/sockjs/iframe.html", then the The relative URL must start with "../../" to traverse up to the location above the SockJS mapping. In case of a prefix-based Servlet mapping one more traversal may be needed.

10

Minimum number of bytes that can be send over a single HTTP streaming request before it will be closed. Defaults to 128K (i.e. 128*1024 bytes).

11

The "cookie_needed" value in the response from the SockJs "/info" endpoint. This property indicates whether the use of a JSESSIONID cookie is required for the application to function correctly, e.g. for load balancing or in Java Servlet containers for the use of an HTTP session.

12

The amount of time in milliseconds when the server has not sent any messages and after which the server should send a heartbeat frame to the client in order to keep the connection from breaking. The default value is 25,000 (25 seconds).

13

The amount of time in milliseconds before a client is considered disconnected after not having a receiving connection, i.e. an active connection over which the server can send data to the client. The default value is 5000.

14

The number of server-to-client messages that a session can cache while waiting for the next HTTP polling request from the client. The default size is 100.

15

Some load balancers don’t support websockets. Set this option to false to disable the WebSocket transport on the server side. The default value is true.

(16)

The TaskScheduler bean reference; a new ThreadPoolTaskScheduler instance will be created if no value is provided. This scheduler instance will be used for scheduling heart-beat messages.

(17)

The SockJsMessageCodec bean reference to use for encoding and decoding SockJS messages. By default Jackson2SockJsMessageCodec is used requiring the Jackson library to be present on the classpath.

(18)

List of TransportHandler bean references.

(19)

The option to disable automatic addition of CORS headers for SockJS requests. The default value is false.

<int-websocket:outbound-channel-adapter>

<int-websocket:outbound-channel-adapter
                          id=""  1
                          channel=""  2
                          container=""  3
                          default-protocol-handler=""  4
                          protocol-handlers=""  5
                          message-converters=""  6
                          merge-with-default-converters=""  7
                          auto-startup=""  8
                          phase=""/>  9

1

The component bean name. If the channel attribute isn’t provided, a DirectChannel is created and registered with the application context with this id attribute as the bean name. In this case, the endpoint is registered with the bean name id + '.adapter'. And the MessageHandler is registered with the bean alias id + '.handler'.

2

Identifies the channel attached to this adapter.

3

The reference to the IntegrationWebSocketContainer bean, which encapsulates the low-level connection and WebSocketSession handling operations. Required.

4

Optional reference to a SubProtocolHandler instance. It is used when the client did not request a sub-protocol or it is a single protocol-handler. If this reference or protocol-handlers list aren’t provided the PassThruSubProtocolHandler is used by default.

5

List of SubProtocolHandler bean references for this Channel Adapter. If only a single bean reference is provided and a default-protocol-handler isn’t provided, that single SubProtocolHandler will be used as the default-protocol-handler. If this attribute or default-protocol-handler aren’t provided, the PassThruSubProtocolHandler is used by default.

6

List of MessageConverter bean references for this Channel Adapter.

7

Flag to indicate if the default converters should be registered after any custom converters. This flag is used only if message-converters are provided, otherwise all default converters will be registered. Defaults to false. The default converters are (in the order): StringMessageConverter, ByteArrayMessageConverter and MappingJackson2MessageConverter if the Jackson library is present on the classpath.

8

Boolean value indicating whether this endpoint should start automatically. Default to true.

9

The lifecycle phase within which this endpoint should start and stop. The lower the value the earlier this endpoint will start and the later it will stop. The default is Integer.MIN_VALUE. Values can be negative. See SmartLifeCycle.

<int-websocket:inbound-channel-adapter>

<int-websocket:inbound-channel-adapter
                            id=""  1
                            channel=""  2
                            error-channel=""  3
                            container=""  4
                            default-protocol-handler=""  5
                            protocol-handlers=""  6
                            message-converters=""  7
                            merge-with-default-converters=""  8
                            send-timeout=""  9
                            payload-type=""  10
                            use-broker=""  11
                            auto-startup=""  12
                            phase=""/>  13

1

The component bean name. If the channel attribute isn’t provided, a DirectChannel is created and registered with the application context with this id attribute as the bean name. In this case, the endpoint is registered with the bean name id + '.adapter'.

2

Identifies the channel attached to this adapter.

3

The MessageChannel bean reference to which the ErrorMessages should be sent.

4

See the same option on the <int-websocket:outbound-channel-adapter>.

5

See the same option on the <int-websocket:outbound-channel-adapter>.

6

See the same option on the <int-websocket:outbound-channel-adapter>.

7

See the same option on the <int-websocket:outbound-channel-adapter>.

8

See the same option on the <int-websocket:outbound-channel-adapter>.

9

Maximum amount of time in milliseconds to wait when sending a message to the channel if the channel may block. For example, a QueueChannel can block until space is available if its maximum capacity has been reached.

10

Fully qualified name of the java type for the target payload to convert from the incoming WebSocketMessage. Default to String.

11

Flag to indicate if this adapter will send non-MESSAGE WebSocketMessage s and messages with broker destinations to the AbstractBrokerMessageHandler from the application context. The Broker Relay configuration is required when this attribute is true. This attribute is used only on the server side. On the client side, it is ignored. Defaults to false.

12

See the same option on the <int-websocket:outbound-channel-adapter>.

13

See the same option on the <int-websocket:outbound-channel-adapter>.