4. Reference

If you define a KafkaAdmin bean in your application context, it can automatically add topics to the broker. Simply add a NewTopic @Bean for each topic to the application context.

@Bean
public KafkaAdmin admin() {
    Map<String, Object> configs = new HashMap<>();
    configs.put(AdminClientConfig.BOOTSTRAP_SERVERS_CONFIG,
            StringUtils.arrayToCommaDelimitedString(kafkaEmbedded().getBrokerAddresses()));
    return new KafkaAdmin(configs);
}

@Bean
public NewTopic topic1() {
    return new NewTopic("foo", 10, (short) 2);
}

@Bean
public NewTopic topic2() {
    return new NewTopic("bar", 10, (short) 2);
}

By default, if the broker is not available, a message will be logged, but the context will continue to load. You can programmatically invoke the admin’s initialize() method to try again later. If you wish this condition to be considered fatal, set the admin’s fatalIfBrokerNotAvailable property to true and the context will fail to initialize.

	Note
	The admin does not alter existing topics; it will log (INFO) if the number of partitions don’t match.

Messages can be received by configuring a MessageListenerContainer and providing a Message Listener, or by using the @KafkaListener annotation.

public interface MessageListener<K, V> {} 

    void onMessage(ConsumerRecord<K, V> data);

}

public interface AcknowledgingMessageListener<K, V> {} 

    void onMessage(ConsumerRecord<K, V> data, Acknowledgment acknowledgment);

}

public interface BatchMessageListener<K, V> {} 

    void onMessage(List<ConsumerRecord<K, V>> data);

}

public interface BatchAcknowledgingMessageListener<K, V> {} 

    void onMessage(List<ConsumerRecord<K, V>> data, Acknowledgment acknowledgment);

}

Message Listener Containers

Two MessageListenerContainer implementations are provided:

• KafkaMessageListenerContainer
• ConcurrentMessageListenerContainer

The KafkaMessageListenerContainer receives all message from all topics/partitions on a single thread. The ConcurrentMessageListenerContainer delegates to 1 or more KafkaMessageListenerContainer s to provide multi-threaded consumption.

KafkaMessageListenerContainer

The following constructors are available.

public KafkaMessageListenerContainer(ConsumerFactory<K, V> consumerFactory,
                    ContainerProperties containerProperties)

public KafkaMessageListenerContainer(ConsumerFactory<K, V> consumerFactory,
                    ContainerProperties containerProperties,
                    TopicPartitionInitialOffset... topicPartitions)

Each takes a ConsumerFactory and information about topics and partitions, as well as other configuration in a ContainerProperties object. The second constructor is used by the ConcurrentMessageListenerContainer (see below) to distribute TopicPartitionInitialOffset across the consumer instances. ContainerProperties has the following constructors:

public ContainerProperties(TopicPartitionInitialOffset... topicPartitions)

public ContainerProperties(String... topics)

public ContainerProperties(Pattern topicPattern)

The first takes an array of TopicPartitionInitialOffset arguments to explicitly instruct the container which partitions to use (using the consumer assign() method), and with an optional initial offset: a positive value is an absolute offset by default; a negative value is relative to the current last offset within a partition by default. A constructor for TopicPartitionInitialOffset is provided that takes an additional boolean argument. If this is true, the initial offsets (positive or negative) are relative to the current position for this consumer. The offsets are applied when the container is started. The second takes an array of topics and Kafka allocates the partitions based on the group.id property - distributing partitions across the group. The third uses a regex Pattern to select the topics.

To assign a MessageListener to a container, use the ContainerProps.setMessageListener method when creating the Container:

ContainerProperties containerProps = new ContainerProperties("topic1", "topic2");
containerProps.setMessageListener(new MessageListener<Integer, String>() {
    ...
});
DefaultKafkaConsumerFactory<Integer, String> cf =
                        new DefaultKafkaConsumerFactory<Integer, String>(consumerProps());
KafkaMessageListenerContainer<Integer, String> container =
                        new KafkaMessageListenerContainer<>(cf, containerProps);
return container;

Refer to the JavaDocs for ContainerProperties for more information about the various properties that can be set.

ConcurrentMessageListenerContainer

The single constructor is similar to the first KafkaListenerContainer constructor:

public ConcurrentMessageListenerContainer(ConsumerFactory<K, V> consumerFactory,
                            ContainerProperties containerProperties)

It also has a property concurrency, e.g. container.setConcurrency(3) will create 3 KafkaMessageListenerContainer s.

For the first constructor, kafka will distribute the partitions across the consumers. For the second constructor, the ConcurrentMessageListenerContainer distributes the TopicPartition s across the delegate KafkaMessageListenerContainer s.

If, say, 6 TopicPartition s are provided and the concurrency is 3; each container will get 2 partitions. For 5 TopicPartition s, 2 containers will get 2 partitions and the third will get 1. If the concurrency is greater than the number of TopicPartitions, the concurrency will be adjusted down such that each container will get one partition.

	Note
	The client.id property (if set) will be appended with -n where n is the consumer instance according to the concurrency. This is required to provide unique names for MBeans when JMX is enabled.

Starting with version 1.3, the MessageListenerContainer provides an access to the metrics of the underlying KafkaConsumer. In case of ConcurrentMessageListenerContainer the metrics() method returns the metrics for all the target KafkaMessageListenerContainer instances. The metrics are grouped into the Map<MetricName, ? extends Metric> by the client-id provided for the underlying KafkaConsumer.

Committing Offsets

Several options are provided for committing offsets. If the enable.auto.commit consumer property is true, kafka will auto-commit the offsets according to its configuration. If it is false, the containers support the following AckMode s.

The consumer poll() method will return one or more ConsumerRecords; the MessageListener is called for each record; the following describes the action taken by the container for each AckMode :

• RECORD - commit the offset when the listener returns after processing the record.
• BATCH - commit the offset when all the records returned by the poll() have been processed.
• TIME - commit the offset when all the records returned by the poll() have been processed as long as the ackTime since the last commit has been exceeded.
• COUNT - commit the offset when all the records returned by the poll() have been processed as long as ackCount records have been received since the last commit.
• COUNT_TIME - similar to TIME and COUNT but the commit is performed if either condition is true.
• MANUAL - the message listener is responsible to acknowledge() the Acknowledgment; after which, the same semantics as BATCH are applied.
• MANUAL_IMMEDIATE - commit the offset immediately when the Acknowledgment.acknowledge() method is called by the listener.

	Note
	MANUAL, and MANUAL_IMMEDIATE require the listener to be an AcknowledgingMessageListener or a BatchAcknowledgingMessageListener; see Message Listeners.

The commitSync() or commitAsync() method on the consumer is used, depending on the syncCommits container property.

The Acknowledgment has this method:

public interface Acknowledgment {

    void acknowledge();

}

This gives the listener control over when offsets are committed.

Listener Container Auto Startup

The listener containers implement SmartLifecycle and autoStartup is true by default; the containers are started in a late phase (Integer.MAX-VALUE - 100). Other components that implement SmartLifecycle, that handle data from listeners, should be started in an earlier phase. The - 100 leaves room for later phases to enable components to be auto-started after the containers.

public class Listener {

    @KafkaListener(id = "foo", topics = "myTopic")
    public void listen(String data) {
        ...
    }

}

@Configuration
@EnableKafka
public class KafkaConfig {

    @Bean
    KafkaListenerContainerFactory<ConcurrentMessageListenerContainer<Integer, String>>
                        kafkaListenerContainerFactory() {
        ConcurrentKafkaListenerContainerFactory<Integer, String> factory =
                                new ConcurrentKafkaListenerContainerFactory<>();
        factory.setConsumerFactory(consumerFactory());
        factory.setConcurrency(3);
        factory.getContainerProperties().setPollTimeout(3000);
        return factory;
    }

    @Bean
    public ConsumerFactory<Integer, String> consumerFactory() {
        return new DefaultKafkaConsumerFactory<>(consumerConfigs());
    }

    @Bean
    public Map<String, Object> consumerConfigs() {
        Map<String, Object> props = new HashMap<>();
        props.put(ProducerConfig.BOOTSTRAP_SERVERS_CONFIG, embeddedKafka.getBrokersAsString());
        ...
        return props;
    }
}

@KafkaListener(id = "bar", topicPartitions =
        { @TopicPartition(topic = "topic1", partitions = { "0", "1" }),
          @TopicPartition(topic = "topic2", partitions = "0",
             partitionOffsets = @PartitionOffset(partition = "1", initialOffset = "100"))
        })
public void listen(ConsumerRecord<?, ?> record) {
    ...
}

@KafkaListener(id = "baz", topics = "myTopic",
          containerFactory = "kafkaManualAckListenerContainerFactory")
public void listen(String data, Acknowledgment ack) {
    ...
    ack.acknowledge();
}

@KafkaListener(id = "qux", topicPattern = "myTopic1")
public void listen(@Payload String foo,
        @Header(KafkaHeaders.RECEIVED_MESSAGE_KEY) Integer key,
        @Header(KafkaHeaders.RECEIVED_PARTITION_ID) int partition,
        @Header(KafkaHeaders.RECEIVED_TOPIC) String topic,
        @Header(KafkaHeaders.RECEIVED_TIMESTAMP) long ts
        ) {
    ...
}

@Bean
public KafkaListenerContainerFactory<?> batchFactory() {
    ConcurrentKafkaListenerContainerFactory<Integer, String> factory =
            new ConcurrentKafkaListenerContainerFactory<>();
    factory.setConsumerFactory(consumerFactory());
    factory.setBatchListener(true);  // <<<<<<<<<<<<<<<<<<<<<<<<<
    return factory;
}

@KafkaListener(id = "list", topics = "myTopic", containerFactory = "batchFactory")
public void listen(List<String> list) {
    ...
}

@KafkaListener(id = "list", topics = "myTopic", containerFactory = "batchFactory")
public void listen(List<String> list,
        @Header(KafkaHeaders.RECEIVED_MESSAGE_KEY) List<Integer> keys,
        @Header(KafkaHeaders.RECEIVED_PARTITION_ID) List<Integer> partitions,
        @Header(KafkaHeaders.RECEIVED_TOPIC) List<String> topics,
        @Header(KafkaHeaders.OFFSET) List<Long> offsets) {
    ...
}

@KafkaListener(id = "listMsg", topics = "myTopic", containerFactory = "batchFactory")
public void listen14(List<Message<?>> list) {
    ...
}

@KafkaListener(id = "listMsgAck", topics = "myTopic", containerFactory = "batchFactory")
public void listen15(List<Message<?>> list, Acknowledgment ack) {
    ...
}

@KafkaListener(id = "listCRs", topics = "myTopic", containerFactory = "batchFactory")
public void listen(List<ConsumerRecord<Integer, String>> list) {
    ...
}

@KafkaListener(id = "listCRsAck", topics = "myTopic", containerFactory = "batchFactory")
public void listen(List<ConsumerRecord<Integer, String>> list, Acknowledgment ack) {
    ...
}

@KafkaListener(id = "multi", topics = "myTopic")
static class MultiListenerBean {

    @KafkaHandler
    public void listen(String foo) {
        ...
    }

    @KafkaHandler
    public void listen(Integer bar) {
        ...
    }

}

@Autowired
private KafkaListenerEndpointRegistry registry;

...

@KafkaListener(id = "myContainer", topics = "myTopic", autoStartup = "false")
public void listen(...) { ... }

...

    registry.getListenerContainer("myContainer").start();

Retrying Deliveries

If your listener throws an exception, the default behavior is to invoke the ErrorHandler, if configured, or logged otherwise.

	Note
	Two error handler interfaces are provided ErrorHandler and BatchErrorHandler; the appropriate type must be configured to match the Message Listener.

To retry deliveries, convenient listener adapters - RetryingMessageListenerAdapter and RetryingAcknowledgingMessageListenerAdapter are provided, depending on whether you are using a MessageListener or an AcknowledgingMessageListener.

These can be configured with a RetryTemplate and RecoveryCallback<Void> - see the spring-retry project for information about these components. If a recovery callback is not provided, the exception is thrown to the container after retries are exhausted. In that case, the ErrorHandler will be invoked, if configured, or logged otherwise.

When using @KafkaListener, set the RetryTemplate (and optionally recoveryCallback) on the container factory and the listener will be wrapped in the appropriate retrying adapter.

The contents of the RetryContext passed into the RecoveryCallback will depend on the type of listener. The context will always have an attribute record which is the record for which the failure occurred. If your listener is acknowledging the additional acknowledgment attribute is provided. For convenience, the AbstractRetryingMessageListenerAdapter provides static constants for these keys. See its javadocs for more information.

A retry adapter is not provided for any of the batch message listeners.

Detecting Idle and Non-Responsive Consumers

While efficient, one problem with asynchronous consumers is detecting when they are idle - users might want to take some action if no messages arrive for some period of time.

You can configure the listener container to publish a ListenerContainerIdleEvent when some time passes with no message delivery. While the container is idle, an event will be published every idleEventInterval milliseconds.

To configure this feature, set the idleEventInterval on the container:

@Bean
public KafKaMessageListenerContainer(ConnectionFactory connectionFactory) {
    ContainerProperties containerProps = new ContainerProperties("topic1", "topic2");
    ...
    containerProps.setIdleEventInterval(60000L);
    ...
    KafKaMessageListenerContainer<String, String> container = new KafKaMessageListenerContainer<>(...);
    return container;
}

Or, for a @KafkaListener…​

@Bean
public ConcurrentKafkaListenerContainerFactory kafkaListenerContainerFactory() {
    ConcurrentKafkaListenerContainerFactory<String, String> factory =
                new ConcurrentKafkaListenerContainerFactory<>();
    ...
    factory.getContainerProperties().setIdleEventInterval(60000L);
    ...
    return factory;
}

In each of these cases, an event will be published once per minute while the container is idle.

In addition, if the broker is unreachable (at the time of writing), the consumer poll() method does not exit, so no messages are received, and idle events can’t be generated. To solve this issue, the container will publish a NonResponsiveConsumerEvent if a poll does not return within 3x the pollInterval property. By default, this check is performed once every 30 seconds in each container. You can modify the behavior by setting the monitorInterval and noPollThreshold properties in the ContainerProperties when configuring the listener container. Receiveing such an event will allow you to stop the container(s), thus waking the consumer so it can terminate.

Event Consumption

You can capture these events by implementing ApplicationListener - either a general listener, or one narrowed to only receive this specific event. You can also use @EventListener, introduced in Spring Framework 4.2.

The following example combines the @KafkaListener and @EventListener into a single class. It’s important to understand that the application listener will get events for all containers so you may need to check the listener id if you want to take specific action based on which container is idle. You can also use the @EventListener condition for this purpose.

The events have 4 properties:

• source - the listener container instance
• id - the listener id (or container bean name)
• idleTime - the time the container had been idle when the event was published
• topicPartitions - the topics/partitions that the container was assigned at the time the event was generated

public class Listener {

    @KafkaListener(id = "qux", topics = "annotated")
    public void listen4(@Payload String foo, Acknowledgment ack) {
        ...
    }

    @EventListener(condition = "event.listenerId.startsWith('qux-')")
    public void eventHandler(ListenerContainerIdleEvent event) {
        this.event = event;
        eventLatch.countDown();
    }

}

	Important
	Event listeners will see events for all containers; so, in the example above, we narrow the events received based on the listener ID. Since containers created for the @KafkaListener support concurrency, the actual containers are named id-n where the n is a unique value for each instance to support the concurrency. Hence we use startsWith in the condition.

Caution

If you wish to use the idle event to stop the lister container, you should not call container.stop() on the thread that calls the listener - it will cause delays and unnecessary log messages. Instead, you should hand off the event to a different thread that can then stop the container. Also, you should not stop() the container instance in the event if it is a child container, you should stop the concurrent container instead.

Current Positions when Idle

Note that you can obtain the current positions when idle is detected by implementing ConsumerSeekAware in your listener; see onIdleContainer() in `the section called “Seeking to a Specific Offset”.

void registerSeekCallback(ConsumerSeekCallback callback);

void onPartitionsAssigned(Map<TopicPartition, Long> assignments, ConsumerSeekCallback callback);

void onIdleContainer(Map<TopicPartition, Long> assignments, ConsumerSeekCallback callback);

void seek(String topic, int partition, long offset);

void seekToBeginning(String topic, int partition);

void seekToEnd(String topic, int partition);

Apache Kafka provides a high-level API for serializing/deserializing record values as well as their keys. It is present with the org.apache.kafka.common.serialization.Serializer<T> and org.apache.kafka.common.serialization.Deserializer<T> abstractions with some built-in implementations. Meanwhile we can specify simple (de)serializer classes using Producer and/or Consumer configuration properties, e.g.:

props.put(ConsumerConfig.KEY_DESERIALIZER_CLASS_CONFIG, IntegerDeserializer.class);
props.put(ConsumerConfig.VALUE_DESERIALIZER_CLASS_CONFIG, StringDeserializer.class);
...
props.put(ProducerConfig.KEY_SERIALIZER_CLASS_CONFIG, IntegerSerializer.class);
props.put(ProducerConfig.VALUE_SERIALIZER_CLASS_CONFIG, StringSerializer.class);

for more complex or particular cases, the KafkaConsumer, and therefore KafkaProducer, provides overloaded constructors to accept (De)Serializer instances for keys and/or values, respectively.

To meet this API, the DefaultKafkaProducerFactory and DefaultKafkaConsumerFactory also provide properties to allow to inject a custom (De)Serializer to target Producer/Consumer.

For this purpose, Spring for Apache Kafka also provides JsonSerializer/JsonDeserializer implementations based on the Jackson JSON object mapper. The JsonSerializer is quite simple and just allows writing any Java object as a JSON byte[], the JsonDeserializer requires an additional Class<?> targetType argument to allow the deserialization of a consumed byte[] to the proper target object.

JsonDeserializer<Bar> barDeserializer = new JsonDeserializer<>(Bar.class);

Both JsonSerializer and JsonDeserializer can be customized with an ObjectMapper. You can also extend them to implement some particular configuration logic in the configure(Map<String, ?> configs, boolean isKey) method.

Although the Serializer/Deserializer API is quite simple and flexible from the low-level Kafka Consumer and Producer perspective, you might need more flexibility at the Spring Messaging level, either when using @KafkaListener or Spring Integration. To easily convert to/from org.springframework.messaging.Message, Spring for Apache Kafka provides a MessageConverter abstraction with the MessagingMessageConverter implementation and its StringJsonMessageConverter customization. The MessageConverter can be injected into KafkaTemplate instance directly and via AbstractKafkaListenerContainerFactory bean definition for the @KafkaListener.containerFactory() property:

@Bean
public KafkaListenerContainerFactory<?> kafkaJsonListenerContainerFactory() {
    ConcurrentKafkaListenerContainerFactory<Integer, String> factory =
        new ConcurrentKafkaListenerContainerFactory<>();
    factory.setConsumerFactory(consumerFactory());
    factory.setMessageConverter(new StringJsonMessageConverter());
    return factory;
}
...
@KafkaListener(topics = "jsonData",
                containerFactory = "kafkaJsonListenerContainerFactory")
public void jsonListener(Foo foo) {
...
}

When using a @KafkaListener, the parameter type is provided to the message converter to assist with the conversion.

	Note
	This type inference can only be achieved when the @KafkaListener annotation is declared at the method level. With a class-level @KafkaListener, the payload type is used to select which @KafkaHandler method to invoke so it must already have been converted before the method can be chosen.

	Note
	When using the StringJsonMessageConverter, you should use a StringDeserializer in the kafka consumer configuration and StringSerializer in the kafka producer configuration, when using Spring Integration or the KafkaTemplate.send(Message<?> message) method.

Starting with version 1.3.2 you can also use a StringJsonMessageConverter within a BatchMessagingMessageConverter for converting batch messages, when using a batch listener container factory.

@Bean
public KafkaListenerContainerFactory<?> kafkaListenerContainerFactory() {
    ConcurrentKafkaListenerContainerFactory<Integer, String> factory =
            new ConcurrentKafkaListenerContainerFactory<>();
    factory.setConsumerFactory(consumerFactory());
    factory.setBatchListener(true);
    factory.setMessageConverter(new BatchMessagingMessageConverter(converter()));
    return factory;
}

@Bean
public StringJsonMessageConverter converter() {
    return new StringJsonMessageConverter();
}

Note that for this to work, the method signature for the conversion target must be a container object with a single generic parameter type, such as:

@KafkaListener(topics = "blc1")
public void listen(List<Foo> foos, @Header(KafkaHeaders.OFFSET) List<Long> offsets) {
    ...
}

Notice that you can still access the batch headers too.

The 0.11.0.0 client introduced support for headers in messages. Spring for Apache Kafka version 2.0 now supports mapping these headers to/from spring-messaging MessageHeaders.

	Note
	Previous versions mapped ConsumerRecord and ProducerRecord to spring-messaging Message<?> where the value property is mapped to/from the payload and other properties (topic, partition, etc) were mapped to headers. This is still the case but additional, arbitrary, headers can now be mapped.

Apache Kafka headers have a simple API:

public interface Header {

    String key();

    byte[] value();

}

The KafkaHeaderMapper strategy is provided to map header entries between Kafka Headers and MessageHeaders:

public interface KafkaHeaderMapper {

    void fromHeaders(MessageHeaders headers, Headers target);

    void toHeaders(Headers source, Map<String, Object> target);

}

The DefaultKafkaHeaderMapper maps the key to the MessageHeaders header name and, in order to support rich header types, for outbound messages, JSON conversion is performed. A "special" header, with key, spring_json_header_types contains a JSON map of <key>:<type>. This header is used on the inbound side to provide appropriate conversion of each header value to the original type.

On the inbound side, all Kafka Header s are mapped to MessageHeaders. On the outbound side, by default, all MessageHeaders are mapped except id, timestamp, and the headers that map to ConsumerRecord properties.

You can specify which headers are to be mapped for outbound messages, by providing patterns to the mapper.

public DefaultKafkaHeaderMapper() {
    ...
}

public DefaultKafkaHeaderMapper(ObjectMapper objectMapper) {
    ...
}

public DefaultKafkaHeaderMapper(String... patterns) {
    ...
}

public DefaultKafkaHeaderMapper(ObjectMapper objectMapper, String... patterns) {
    ...
}

The first constructor will use a default Jackson ObjectMapper and map most headers, as discussed above. The second constructor will use the provided Jackson ObjectMapper and map most headers, as discussed above. The third constructor will use a default Jackson ObjectMapper and map headers according to the provided patterns. The third constructor will use the provided Jackson ObjectMapper and map headers according to the provided patterns.

Patterns are rather simple and can contain either a leading or trailing wildcard *, or both, e.g. *.foo.*. Patterns can be negated with a leading !. The first pattern that matches a header name wins (positive or negative).

When providing your own patterns, it is recommended to include !id and !timestamp since these headers are read-only on the inbound side.

	Important
	By default, the mapper will only deserialize classes in java.lang and java.util. You can trust other (or all) packages by adding trusted packages using the addTrustedPackages method. If you are receiving messages from untrusted sources, you may wish to add just those packages that you trust. To trust all packages use mapper.addTrustedPackages("*").

The DefaultKafkaHeaderMapper is used in the MessagingMessageConverter and BatchMessagingMessageConverter by default, as long as Jackson is on the class path.

With the batch converter, the converted headers are available in the KafkaHeaders.BATCH_CONVERTED_HEADERS as a List<Map<String, Object>> where the map in a position of the list corresponds to the data position in the payload.

If the converter has no converter (either because Jackson is not present, or it is explicitly set to null), the headers from the consumer record are provided unconverted in the KafkaHeaders.NATIVE_HEADERS header (a Headers object, or a List<Headers> in the case of the batch converter, where the position in the list corresponds to the data position in the payload).

	Important
	The Jackson ObjectMapper (even if provided) will be enhanced to support deserializing org.springframewor.utils.MimeType objects, often used in the spring-messaging ContentType header. If you don’t wish your mapper to be enhanced in this way, for some reason, you should subclass the DefaultKafkaHeaderMapper and override getObjectMapper() to return your mapper.

When using Log Compaction, it is possible to send and receive messages with null payloads which identifies the deletion of a key.

Starting with version 1.0.3, this is now fully supported.

To send a null payload using the KafkaTemplate simply pass null into the value argument of the send() methods. One exception to this is the send(Message<?> message) variant. Since spring-messaging Message<?> cannot have a null payload, a special payload type KafkaNull is used and the framework will send null. For convenience, the static KafkaNull.INSTANCE is provided.

When using a message listener container, the received ConsumerRecord will have a null value().

To configure the @KafkaListener to handle null payloads, you must use the @Payload annotation with required = false; you will usually also need the key so your application knows which key was "deleted":

@KafkaListener(id = "deletableListener", topics = "myTopic")
public void listen(@Payload(required = false) String value, @Header(KafkaHeaders.RECEIVED_MESSAGE_KEY) String key) {
    // value == null represents key deletion
}

When using a class-level @KafkaListener, some additional configuration is needed - a @KafkaHandler method with a KafkaNull payload:

@KafkaListener(id = "multi", topics = "myTopic")
static class MultiListenerBean {

    private final CountDownLatch latch1 = new CountDownLatch(2);

    @KafkaHandler
    public void listen(String foo) {
        ...
    }

    @KafkaHandler
    public void listen(Integer bar) {
        ...
    }

    @KafkaHandler
    public void delete(@Payload(required = false) KafkaNull nul, @Header(KafkaHeaders.RECEIVED_MESSAGE_KEY) int key) {
        ...
    }

}

@FunctionalInterface
public interface KafkaListenerErrorHandler {

    Object handleError(Message<?> message, ListenerExecutionFailedException exception) throws Exception;

}

Starting with version 2.0 a KafkaJaasLoginModuleInitializer class has been added to assist with Kerberos configuration. Simply add this bean, with the desired configuration, to your application context.

@Bean
public KafkaJaasLoginModuleInitializer jaasConfig() throws IOException {
    KafkaJaasLoginModuleInitializer jaasConfig = new KafkaJaasLoginModuleInitializer();
    jaasConfig.setControlFlag("REQUIRED");
    Map<String, String> options = new HashMap<>();
    options.put("useKeyTab", "true");
    options.put("storeKey", "true");
    options.put("keyTab", "/etc/security/keytabs/kafka_client.keytab");
    options.put("principal", "[email protected]");
    jaasConfig.setOptions(options);
    return jaasConfig;
}

Starting with version 1.1.4, Spring for Apache Kafka provides first class support for Kafka Streams. For using it from a Spring application, the kafka-streams jar must be present on classpath. It is an optional dependency of the spring-kafka project and isn’t downloaded transitively.

The reference Apache Kafka Streams documentation suggests this way of using the API:

// Use the builders to define the actual processing topology, e.g. to specify
// from which input topics to read, which stream operations (filter, map, etc.)
// should be called, and so on.

KStreamBuilder builder = ...;  // when using the Kafka Streams DSL
//
// OR
//
TopologyBuilder builder = ...; // when using the Processor API

// Use the configuration to tell your application where the Kafka cluster is,
// which serializers/deserializers to use by default, to specify security settings,
// and so on.
StreamsConfig config = ...;

KafkaStreams streams = new KafkaStreams(builder, config);

// Start the Kafka Streams instance
streams.start();

// Stop the Kafka Streams instance
streams.close();

So, we have two main components: KStreamBuilder (which extends TopologyBuilder as well) with an API to build KStream (or KTable) instances and KafkaStreams to manage their lifecycle. Note: all KStream instances exposed to a KafkaStreams instance by a single KStreamBuilder will be started and stopped at the same time, even if they have a fully different logic. In other words all our streams defined by a KStreamBuilder are tied with a single lifecycle control. Once a KafkaStreams instance has been closed via streams.close() it cannot be restarted, and a new KafkaStreams instance to restart stream processing must be created instead.

To simplify the usage of Kafka Streams from the Spring application context perspective and utilize the lifecycle management via container, the Spring for Apache Kafka introduces KStreamBuilderFactoryBean. This is an AbstractFactoryBean implementation to expose a KStreamBuilder singleton instance as a bean:

@Bean
public FactoryBean<KStreamBuilder> myKStreamBuilder(StreamsConfig streamsConfig) {
    return new KStreamBuilderFactoryBean(streamsConfig);
}

The KStreamBuilderFactoryBean also implements SmartLifecycle to manage lifecycle of an internal KafkaStreams instance. Similar to the Kafka Streams API, the KStream instances must be defined before starting the KafkaStreams, and that also applies for the Spring API for Kafka Streams. Therefore we have to declare KStream s on the KStreamBuilder before the application context is refreshed, when we use default autoStartup = true on the KStreamBuilderFactoryBean. For example, KStream can be just as a regular bean definition, meanwhile the Kafka Streams API is used without any impacts:

@Bean
public KStream<?, ?> kStream(KStreamBuilder kStreamBuilder) {
    KStream<Integer, String> stream = kStreamBuilder.stream(STREAMING_TOPIC1);
    // Fluent KStream API
    return stream;
}

If you would like to control lifecycle manually (e.g. stop and start by some condition), you can reference the KStreamBuilderFactoryBean bean directly using factory bean (&) prefix. Since KStreamBuilderFactoryBean utilize its internal KafkaStreams instance, it is safe to stop and restart it again - a new KafkaStreams is created on each start(). Also consider using different KStreamBuilderFactoryBean s, if you would like to control lifecycles for KStream instances separately.

You can specify KafkaStreams.StateListener and Thread.UncaughtExceptionHandler options on the KStreamBuilderFactoryBean which are delegated to the internal KafkaStreams instance. That internal KafkaStreams instance can be accessed via KStreamBuilderFactoryBean.getKafkaStreams() if you need to perform some KafkaStreams operations directly. You can autowire KStreamBuilderFactoryBean bean by type, but you should be sure that you use full type in the bean definition, for example:

@Bean
public KStreamBuilderFactoryBean myKStreamBuilder(StreamsConfig streamsConfig) {
    return new KStreamBuilderFactoryBean(streamsConfig);
}
...
@Autowired
private KStreamBuilderFactoryBean myKStreamBuilderFactoryBean;

Or add @Qualifier for injection by name If you use interface bean definition:

@Bean
public FactoryBean<KStreamBuilder> myKStreamBuilder(StreamsConfig streamsConfig) {
    return new KStreamBuilderFactoryBean(streamsConfig);
}
...
@Autowired
@Qualifier("&myKStreamBuilder")
private KStreamBuilderFactoryBean myKStreamBuilderFactoryBean;

For serializing and deserializing data when reading or writing to topics or state stores in JSON format, Spring Kafka provides a JsonSerde implementation using JSON, delegating to the JsonSerializer and JsonDeserializer described in the serialization/deserialization section. The JsonSerde provides the same configuration options via its constructor (target type and/or ObjectMapper). In the following example we use the JsonSerde to serialize and deserialize the Foo payload of a Kafka stream - the JsonSerde can be used in a similar fashion wherever an instance is required.

stream.through(Serdes.Integer(), new JsonSerde<>(Foo.class), "foos");

To configure the Kafka Streams environment, the KStreamBuilderFactoryBean requires a Map of particular properties or a StreamsConfig instance. See Apache Kafka documentation for all possible options.

To avoid boilerplate code for most cases, especially when you develop micro services, Spring for Apache Kafka provides the @EnableKafkaStreams annotation, which should be placed alongside with @Configuration. Only you need is to declare StreamsConfig bean with the defaultKafkaStreamsConfig name. A KStreamBuilder bean with the defaultKStreamBuilder name will be declare in the application context automatically. Any additional KStreamBuilderFactoryBean beans can be declared and used as well.

Putting it all together:

@Configuration
@EnableKafka
@EnableKafkaStreams
public static class KafkaStreamsConfiguration {

    @Bean(name = KafkaStreamsDefaultConfiguration.DEFAULT_STREAMS_CONFIG_BEAN_NAME)
    public StreamsConfig kStreamsConfigs() {
        Map<String, Object> props = new HashMap<>();
        props.put(StreamsConfig.APPLICATION_ID_CONFIG, "testStreams");
        props.put(StreamsConfig.KEY_SERDE_CLASS_CONFIG, Serdes.Integer().getClass().getName());
        props.put(StreamsConfig.VALUE_SERDE_CLASS_CONFIG, Serdes.String().getClass().getName());
        props.put(StreamsConfig.TIMESTAMP_EXTRACTOR_CLASS_CONFIG, WallclockTimestampExtractor.class.getName());
        return new StreamsConfig(props);
    }

    @Bean
    public KStream<Integer, String> kStream(KStreamBuilder kStreamBuilder) {
        KStream<Integer, String> stream = kStreamBuilder.stream("streamingTopic1");
        stream
                .mapValues(String::toUpperCase)
                .groupByKey()
                .reduce((String value1, String value2) -> value1 + value2,
                		TimeWindows.of(1000),
                		"windowStore")
                .toStream()
                .map((windowedId, value) -> new KeyValue<>(windowedId.key(), value))
                .filter((i, s) -> s.length() > 40)
                .to("streamingTopic2");

        stream.print();

        return stream;
    }

}

The spring-kafka-test jar contains some useful utilities to assist with testing your applications.

o.s.kafka.test.utils.KafkaTestUtils provides some static methods to set up producer and consumer properties:

/**
 * Set up test properties for an {@code <Integer, String>} consumer.
 * @param group the group id.
 * @param autoCommit the auto commit.
 * @param embeddedKafka a {@link KafkaEmbedded} instance.
 * @return the properties.
 */
public static Map<String, Object> consumerProps(String group, String autoCommit,
                                       KafkaEmbedded embeddedKafka) { ... }

/**
 * Set up test properties for an {@code <Integer, String>} producer.
 * @param embeddedKafka a {@link KafkaEmbedded} instance.
 * @return the properties.
 */
public static Map<String, Object> senderProps(KafkaEmbedded embeddedKafka) { ... }

A JUnit @Rule is provided that creates an embedded Kafka server.

/**
 * Create embedded Kafka brokers.
 * @param count the number of brokers.
 * @param controlledShutdown passed into TestUtils.createBrokerConfig.
 * @param topics the topics to create (2 partitions per).
 */
public KafkaEmbedded(int count, boolean controlledShutdown, String... topics) { ... }

/**
 *
 * Create embedded Kafka brokers.
 * @param count the number of brokers.
 * @param controlledShutdown passed into TestUtils.createBrokerConfig.
 * @param partitions partitions per topic.
 * @param topics the topics to create.
 */
public KafkaEmbedded(int count, boolean controlledShutdown, int partitions, String... topics) { ... }

The embedded kafka class has a utility method allowing you to consume for all the topics it created:

Map<String, Object> consumerProps = KafkaTestUtils.consumerProps("testT", "false", embeddedKafka);
DefaultKafkaConsumerFactory<Integer, String> cf = new DefaultKafkaConsumerFactory<Integer, String>(
        consumerProps);
Consumer<Integer, String> consumer = cf.createConsumer();
embeddedKafka.consumeFromAllEmbeddedTopics(consumer);

The KafkaTestUtils has some utility methods to fetch results from the consumer:

/**
 * Poll the consumer, expecting a single record for the specified topic.
 * @param consumer the consumer.
 * @param topic the topic.
 * @return the record.
 * @throws org.junit.ComparisonFailure if exactly one record is not received.
 */
public static <K, V> ConsumerRecord<K, V> getSingleRecord(Consumer<K, V> consumer, String topic) { ... }

/**
 * Poll the consumer for records.
 * @param consumer the consumer.
 * @return the records.
 */
public static <K, V> ConsumerRecords<K, V> getRecords(Consumer<K, V> consumer) { ... }

Usage:

...
template.sendDefault(0, 2, "bar");
ConsumerRecord<Integer, String> received = KafkaTestUtils.getSingleRecord(consumer, "topic");
...

When the embedded server is started by JUnit, it sets a system property spring.embedded.kafka.brokers to the address of the broker(s). A convenient constant KafkaEmbedded.SPRING_EMBEDDED_KAFKA_BROKERS is provided for this property.

With the KafkaEmbedded.brokerProperties(Map<String, String>) you can provide additional properties for the Kafka server(s). See Kafka Config for more information about possible broker properties.

Starting with version 1.3.1, the embedded broker is also compatible with kafka version 1.0.0. Use the following in your pom to override the versions in a Spring Boot application:

<dependency>
	<groupId>org.springframework.kafka</groupId>
	<artifactId>spring-kafka</artifactId>
	<version>1.3.2.RELEASE</version>
	<exclusions>
		<exclusion>
			<groupId>org.apache.kafka</groupId>
			<artifactId>kafka-clients</artifactId>
		</exclusion>
	</exclusions>
</dependency>
<dependency>
	<groupId>org.springframework.kafka</groupId>
	<artifactId>spring-kafka-test</artifactId>
	<version>1.3.2.RELEASE</version>
	<scope>test</scope>
	<exclusions>
		<exclusion>
			<groupId>org.apache.kafka</groupId>
			<artifactId>kafka-clients</artifactId>
		</exclusion>
		<exclusion>
			<groupId>org.apache.kafka</groupId>
			<artifactId>kafka_2.11</artifactId>
		</exclusion>
	</exclusions>
</dependency>
<dependency>
	<groupId>org.apache.kafka</groupId>
	<artifactId>kafka-clients</artifactId>
	<version>1.0.0</version>
	<exclusions>
		<exclusion>
			<groupId>org.slf4j</groupId>
			<artifactId>slf4j-api</artifactId>
		</exclusion>
	</exclusions>
</dependency>
<dependency>
	<groupId>org.apache.kafka</groupId>
	<artifactId>kafka-clients</artifactId>
	<version>1.0.0</version>
	<classifier>test</classifier>
	<exclusions>
		<exclusion>
			<groupId>org.slf4j</groupId>
			<artifactId>slf4j-api</artifactId>
		</exclusion>
	</exclusions>
</dependency>
<dependency>
	<groupId>org.apache.kafka</groupId>
	<artifactId>kafka-streams</artifactId>
	<version>1.0.0</version>
	<exclusions>
		<exclusion>
			<groupId>org.slf4j</groupId>
			<artifactId>slf4j-api</artifactId>
		</exclusion>
		<exclusion>
			<groupId>org.slf4j</groupId>
			<artifactId>slf4j-log4j12</artifactId>
		</exclusion>
	</exclusions>
</dependency>
<dependency>
	<groupId>org.apache.kafka</groupId>
	<artifactId>kafka_2.11</artifactId>
	<version>1.0.0</version>
	<exclusions>
		<exclusion>
			<groupId>org.slf4j</groupId>
			<artifactId>slf4j-api</artifactId>
		</exclusion>
		<exclusion>
			<groupId>org.slf4j</groupId>
			<artifactId>slf4j-log4j12</artifactId>
		</exclusion>
	</exclusions>
</dependency>
<dependency>
	<groupId>org.apache.kafka</groupId>
	<artifactId>kafka_2.11</artifactId>
	<version>1.0.0</version>
	<classifier>test</classifier>
	<exclusions>
		<exclusion>
			<groupId>org.slf4j</groupId>
			<artifactId>slf4j-api</artifactId>
		</exclusion>
		<exclusion>
			<groupId>org.slf4j</groupId>
			<artifactId>slf4j-log4j12</artifactId>
		</exclusion>
	</exclusions>
</dependency>

It is generally recommended to use the rule as a @ClassRule to avoid starting/stopping the broker between tests (and use a different topic for each test). Starting with version 2.0, if you are using Spring’s test application context caching, you can also declare a KafkaEmbedded bean, so a single broker can be used across multiple test classes. The JUnit ExternalResource before()/after() lifecycle is wrapped to the afterPropertiesSet() and destroy() Spring infrastructure hooks. For convenience a test class level @EmbeddedKafka annotation is provided with the purpose to register KafkaEmbedded bean:

@RunWith(SpringRunner.class)
@DirtiesContext
@EmbeddedKafka(partitions = 1,
         topics = {
                 KafkaStreamsTests.STREAMING_TOPIC1,
                 KafkaStreamsTests.STREAMING_TOPIC2 })
public class KafkaStreamsTests {

    @Autowired
    private KafkaEmbedded kafkaEmbedded;

	@Test
	public void someTest() {
	    Map<String, Object> consumerProps = KafkaTestUtils.consumerProps("testGroup", "true", this.kafkaEmbedded);
        consumerProps.put(ConsumerConfig.AUTO_OFFSET_RESET_CONFIG, "earliest");
        ConsumerFactory<Integer, String> cf = new DefaultKafkaConsumerFactory<>(consumerProps);
        Consumer<Integer, String> consumer = cf.createConsumer();
        this.embeddedKafka.consumeFromAnEmbeddedTopic(consumer, KafkaStreamsTests.STREAMING_TOPIC2);
        ConsumerRecords<Integer, String> replies = KafkaTestUtils.getRecords(consumer);
        assertThat(replies.count()).isGreaterThanOrEqualTo(1);
	}

    @Configuration
    @EnableKafkaStreams
    public static class KafkaStreamsConfiguration {

        @Value("${" + KafkaEmbedded.SPRING_EMBEDDED_KAFKA_BROKERS + "}")
        private String brokerAddresses;

        @Bean(name = KafkaStreamsDefaultConfiguration.DEFAULT_STREAMS_CONFIG_BEAN_NAME)
        public StreamsConfig kStreamsConfigs() {
            Map<String, Object> props = new HashMap<>();
            props.put(StreamsConfig.APPLICATION_ID_CONFIG, "testStreams");
            props.put(StreamsConfig.BOOTSTRAP_SERVERS_CONFIG, this.brokerAddresses);
            return new StreamsConfig(props);
        }

    }

}

The o.s.kafka.test.hamcrest.KafkaMatchers provides the following matchers:

/**
 * @param key the key
 * @param <K> the type.
 * @return a Matcher that matches the key in a consumer record.
 */
public static <K> Matcher<ConsumerRecord<K, ?>> hasKey(K key) { ... }

/**
 * @param value the value.
 * @param <V> the type.
 * @return a Matcher that matches the value in a consumer record.
 */
public static <V> Matcher<ConsumerRecord<?, V>> hasValue(V value) { ... }

/**
 * @param partition the partition.
 * @return a Matcher that matches the partition in a consumer record.
 */
public static Matcher<ConsumerRecord<?, ?>> hasPartition(int partition) { ... }

/**
 * Matcher testing the timestamp of a {@link ConsumerRecord} asssuming the topic has been set with
 * {@link org.apache.kafka.common.record.TimestampType#CREATE_TIME CreateTime}.
 *
 * @param ts timestamp of the consumer record.
 * @return a Matcher that matches the timestamp in a consumer record.
 */
public static Matcher<ConsumerRecord<?, ?>> hasTimestamp(long ts) {
  return hasTimestamp(TimestampType.CREATE_TIME, ts);
}

/**
 * Matcher testing the timestamp of a {@link ConsumerRecord}
 * @param type timestamp type of the record
 * @param ts timestamp of the consumer record.
 * @return a Matcher that matches the timestamp in a consumer record.
 */
public static Matcher<ConsumerRecord<?, ?>> hasTimestamp(TimestampType type, long ts) {
  return new ConsumerRecordTimestampMatcher(type, ts);
}

/**
 * @param key the key
 * @param <K> the type.
 * @return a Condition that matches the key in a consumer record.
 */
public static <K> Condition<ConsumerRecord<K, ?>> key(K key) { ... }

/**
 * @param value the value.
 * @param <V> the type.
 * @return a Condition that matches the value in a consumer record.
 */
public static <V> Condition<ConsumerRecord<?, V>> value(V value) { ... }

/**
 * @param partition the partition.
 * @return a Condition that matches the partition in a consumer record.
 */
public static Condition<ConsumerRecord<?, ?>> partition(int partition) { ... }

/**
 * @param value the timestamp.
 * @return a Condition that matches the timestamp value in a consumer record.
 */
public static Condition<ConsumerRecord<?, ?>> timestamp(long value) {
  return new ConsumerRecordTimestampCondition(TimestampType.CREATE_TIME, value);
}

/**
 * @param type the type of timestamp
 * @param value the timestamp.
 * @return a Condition that matches the timestamp value in a consumer record.
 */
public static Condition<ConsumerRecord<?, ?>> timestamp(TimestampType type, long value) {
  return new ConsumerRecordTimestampCondition(type, value);
}

Putting it all together:

public class KafkaTemplateTests {

    private static final String TEMPLATE_TOPIC = "templateTopic";

    @ClassRule
    public static KafkaEmbedded embeddedKafka = new KafkaEmbedded(1, true, TEMPLATE_TOPIC);

    @Test
    public void testTemplate() throws Exception {
        Map<String, Object> consumerProps = KafkaTestUtils.consumerProps("testT", "false",
            embeddedKafka);
        DefaultKafkaConsumerFactory<Integer, String> cf =
                            new DefaultKafkaConsumerFactory<Integer, String>(consumerProps);
        ContainerProperties containerProperties = new ContainerProperties(TEMPLATE_TOPIC);
        KafkaMessageListenerContainer<Integer, String> container =
                            new KafkaMessageListenerContainer<>(cf, containerProperties);
        final BlockingQueue<ConsumerRecord<Integer, String>> records = new LinkedBlockingQueue<>();
        container.setupMessageListener(new MessageListener<Integer, String>() {

        	@Override
        	public void onMessage(ConsumerRecord<Integer, String> record) {
                System.out.println(record);
                records.add(record);
            }

        });
        container.setBeanName("templateTests");
        container.start();
        ContainerTestUtils.waitForAssignment(container, embeddedKafka.getPartitionsPerTopic());
        Map<String, Object> senderProps =
                            KafkaTestUtils.senderProps(embeddedKafka.getBrokersAsString());
        ProducerFactory<Integer, String> pf =
                            new DefaultKafkaProducerFactory<Integer, String>(senderProps);
        KafkaTemplate<Integer, String> template = new KafkaTemplate<>(pf);
        template.setDefaultTopic(TEMPLATE_TOPIC);
        template.sendDefault("foo");
        assertThat(records.poll(10, TimeUnit.SECONDS), hasValue("foo"));
        template.sendDefault(0, 2, "bar");
        ConsumerRecord<Integer, String> received = records.poll(10, TimeUnit.SECONDS);
        assertThat(received, hasKey(2));
        assertThat(received, hasPartition(0));
        assertThat(received, hasValue("bar"));
        template.send(TEMPLATE_TOPIC, 0, 2, "baz");
        received = records.poll(10, TimeUnit.SECONDS);
        assertThat(received, hasKey(2));
        assertThat(received, hasPartition(0));
        assertThat(received, hasValue("baz"));
    }

}

The above uses the hamcrest matchers; with AssertJ, the final part looks like this…​

...
        assertThat(records.poll(10, TimeUnit.SECONDS)).has(value("foo"));
        template.sendDefault(0, 2, "bar");
        ConsumerRecord<Integer, String> received = records.poll(10, TimeUnit.SECONDS);
        assertThat(received).has(key(2));
        assertThat(received).has(partition(0));
        assertThat(received).has(value("bar"));
        template.send(TEMPLATE_TOPIC, 0, 2, "baz");
        received = records.poll(10, TimeUnit.SECONDS);
        assertThat(received).has(key(2));
        assertThat(received).has(partition(0));
        assertThat(received).has(value("baz"));
    }
}