This version is still in development and is not considered stable yet. For the latest stable version, please use Spring Security 6.5.2!

Authorization Grant Support

This section describes Spring Security’s support for authorization grants.

Authorization Code

See the OAuth 2.0 Authorization Framework for further details on the Authorization Code grant.

Obtaining Authorization

See the Authorization Request/Response protocol flow for the Authorization Code grant.

Initiating the Authorization Request

The OAuth2AuthorizationRequestRedirectFilter uses an OAuth2AuthorizationRequestResolver to resolve an OAuth2AuthorizationRequest and initiate the Authorization Code grant flow by redirecting the end-user’s user-agent to the Authorization Server’s Authorization Endpoint.

The primary role of the OAuth2AuthorizationRequestResolver is to resolve an OAuth2AuthorizationRequest from the provided web request. The default implementation DefaultOAuth2AuthorizationRequestResolver matches on the (default) path /oauth2/authorization/{registrationId}, extracting the registrationId, and using it to build the OAuth2AuthorizationRequest for the associated ClientRegistration.

Consider the following Spring Boot properties for an OAuth 2.0 Client registration:

spring:
  security:
    oauth2:
      client:
        registration:
          okta:
            client-id: okta-client-id
            client-secret: okta-client-secret
            authorization-grant-type: authorization_code
            redirect-uri: "{baseUrl}/authorized/okta"
            scope: read, write
        provider:
          okta:
            authorization-uri: https://dev-1234.oktapreview.com/oauth2/v1/authorize
            token-uri: https://dev-1234.oktapreview.com/oauth2/v1/token

Given the preceding properties, a request with the base path /oauth2/authorization/okta initiates the Authorization Request redirect by the OAuth2AuthorizationRequestRedirectFilter and ultimately starts the Authorization Code grant flow.

The AuthorizationCodeOAuth2AuthorizedClientProvider is an implementation of OAuth2AuthorizedClientProvider for the Authorization Code grant, which also initiates the Authorization Request redirect by the OAuth2AuthorizationRequestRedirectFilter.

If the OAuth 2.0 Client is a Public Client, configure the OAuth 2.0 Client registration as follows:

spring:
  security:
    oauth2:
      client:
        registration:
          okta:
            client-id: okta-client-id
            client-authentication-method: none
            authorization-grant-type: authorization_code
            redirect-uri: "{baseUrl}/authorized/okta"
            # ...

Public Clients are supported by using Proof Key for Code Exchange (PKCE). If the client is running in an untrusted environment (such as a native application or web browser-based application) and is therefore incapable of maintaining the confidentiality of its credentials, PKCE is automatically used when the following conditions are true:

client-secret is omitted (or empty) and
client-authentication-method is set to none (ClientAuthenticationMethod.NONE)

When ClientRegistration.clientSettings.requireProofKey is true (in this case ClientRegistration.authorizationGrantType must be authorization_code)

If the OAuth 2.0 Provider supports PKCE for Confidential Clients, you may (optionally) configure it using DefaultOAuth2AuthorizationRequestResolver.setAuthorizationRequestCustomizer(OAuth2AuthorizationRequestCustomizers.withPkce()).

The DefaultOAuth2AuthorizationRequestResolver also supports URI template variables for the redirect-uri by using UriComponentsBuilder.

The following configuration uses all the supported URI template variables:

spring:
  security:
    oauth2:
      client:
        registration:
          okta:
            # ...
            redirect-uri: "{baseScheme}://{baseHost}{basePort}{basePath}/authorized/{registrationId}"
            # ...

{baseUrl} resolves to {baseScheme}://{baseHost}{basePort}{basePath}

Configuring the redirect-uri with URI template variables is especially useful when the OAuth 2.0 Client is running behind a Proxy Server. Doing so ensures that the X-Forwarded-* headers are used when expanding the redirect-uri.

Customizing the Authorization Request

One of the primary use cases an OAuth2AuthorizationRequestResolver can realize is the ability to customize the Authorization Request with additional parameters above the standard parameters defined in the OAuth 2.0 Authorization Framework.

For example, OpenID Connect defines additional OAuth 2.0 request parameters for the Authorization Code Flow extending from the standard parameters defined in the OAuth 2.0 Authorization Framework. One of those extended parameters is the prompt parameter.

The prompt parameter is optional. Space delimited, case sensitive list of ASCII string values that specifies whether the Authorization Server prompts the End-User for re-authentication and consent. The defined values are: none, login, consent, and select_account.

The following example shows how to configure the DefaultOAuth2AuthorizationRequestResolver with a Consumer<OAuth2AuthorizationRequest.Builder> that customizes the Authorization Request for oauth2Login(), by including the request parameter prompt=consent.

Java
Kotlin

@Configuration
@EnableWebSecurity
public class OAuth2LoginSecurityConfig {

	@Autowired
	private ClientRegistrationRepository clientRegistrationRepository;

	@Bean
	public SecurityFilterChain filterChain(HttpSecurity http) throws Exception {
		http
			.authorizeHttpRequests((authorize) -> authorize
				.anyRequest().authenticated()
			)
			.oauth2Login((oauth2) -> oauth2
				.authorizationEndpoint((authorization) -> authorization
					.authorizationRequestResolver(
						authorizationRequestResolver(this.clientRegistrationRepository)
					)
				)
			);
		return http.build();
	}

	private OAuth2AuthorizationRequestResolver authorizationRequestResolver(
			ClientRegistrationRepository clientRegistrationRepository) {

		DefaultOAuth2AuthorizationRequestResolver authorizationRequestResolver =
				new DefaultOAuth2AuthorizationRequestResolver(
						clientRegistrationRepository, "/oauth2/authorization");
		authorizationRequestResolver.setAuthorizationRequestCustomizer(
				authorizationRequestCustomizer());

		return  authorizationRequestResolver;
	}

	private Consumer<OAuth2AuthorizationRequest.Builder> authorizationRequestCustomizer() {
		return customizer -> customizer
					.additionalParameters((params) -> params.put("prompt", "consent"));
	}
}

@Configuration
@EnableWebSecurity
class SecurityConfig {

    @Autowired
    private lateinit var customClientRegistrationRepository: ClientRegistrationRepository

    @Bean
    open fun filterChain(http: HttpSecurity): SecurityFilterChain {
        http {
            authorizeHttpRequests {
                authorize(anyRequest, authenticated)
            }
            oauth2Login {
                authorizationEndpoint {
                    authorizationRequestResolver = authorizationRequestResolver(customClientRegistrationRepository)
                }
            }
        }
        return http.build()
    }

    private fun authorizationRequestResolver(
            clientRegistrationRepository: ClientRegistrationRepository?): OAuth2AuthorizationRequestResolver {
        val authorizationRequestResolver = DefaultOAuth2AuthorizationRequestResolver(
                clientRegistrationRepository, "/oauth2/authorization")
        authorizationRequestResolver.setAuthorizationRequestCustomizer(
                authorizationRequestCustomizer())
        return authorizationRequestResolver
    }

    private fun authorizationRequestCustomizer(): Consumer<OAuth2AuthorizationRequest.Builder> {
        return Consumer { customizer ->
            customizer
                    .additionalParameters { params -> params["prompt"] = "consent" }
        }
    }
}

For the simple use case where the additional request parameter is always the same for a specific provider, you can add it directly in the authorization-uri property.

For example, if the value for the request parameter prompt is always consent for the provider okta, you can configure it as follows:

spring:
  security:
    oauth2:
      client:
        provider:
          okta:
            authorization-uri: https://dev-1234.oktapreview.com/oauth2/v1/authorize?prompt=consent

The preceding example shows the common use case of adding a custom parameter on top of the standard parameters. Alternatively, if your requirements are more advanced, you can take full control in building the Authorization Request URI by overriding the OAuth2AuthorizationRequest.authorizationRequestUri property.

OAuth2AuthorizationRequest.Builder.build() constructs the OAuth2AuthorizationRequest.authorizationRequestUri, which represents the Authorization Request URI including all query parameters using the application/x-www-form-urlencoded format.

The following example shows a variation of authorizationRequestCustomizer() from the preceding example and instead overrides the OAuth2AuthorizationRequest.authorizationRequestUri property:

Java
Kotlin

private Consumer<OAuth2AuthorizationRequest.Builder> authorizationRequestCustomizer() {
	return customizer -> customizer
				.authorizationRequestUri((uriBuilder) -> uriBuilder
					.queryParam("prompt", "consent").build());
}

private fun authorizationRequestCustomizer(): Consumer<OAuth2AuthorizationRequest.Builder> {
    return Consumer { customizer: OAuth2AuthorizationRequest.Builder ->
        customizer
                .authorizationRequestUri { uriBuilder: UriBuilder ->
                    uriBuilder
                            .queryParam("prompt", "consent").build()
                }
    }
}

Storing the Authorization Request

The AuthorizationRequestRepository is responsible for the persistence of the OAuth2AuthorizationRequest from the time the Authorization Request is initiated to the time the Authorization Response is received (the callback).

The OAuth2AuthorizationRequest is used to correlate and validate the Authorization Response.

The default implementation of AuthorizationRequestRepository is HttpSessionOAuth2AuthorizationRequestRepository, which stores the OAuth2AuthorizationRequest in the HttpSession.

If you have a custom implementation of AuthorizationRequestRepository, you can configure it as follows:

AuthorizationRequestRepository Configuration

Java
Kotlin
Xml

@Configuration
@EnableWebSecurity
public class OAuth2ClientSecurityConfig {

	@Bean
	public SecurityFilterChain filterChain(HttpSecurity http) throws Exception {
		http
			.oauth2Client((oauth2) -> oauth2
				.authorizationCodeGrant((codeGrant) -> codeGrant
					.authorizationRequestRepository(this.authorizationRequestRepository())
					// ...
				)
			)
            .oauth2Login((oauth2) -> oauth2
                .authorizationEndpoint((endpoint) -> endpoint
                    .authorizationRequestRepository(this.authorizationRequestRepository())
                    // ...
                )
            );
			return http.build();
	}

    @Bean
    public AuthorizationRequestRepository<OAuth2AuthorizationRequest> authorizationRequestRepository() {
        return new CustomOAuth2AuthorizationRequestRepository();
    }
}

@Configuration
@EnableWebSecurity
class OAuth2ClientSecurityConfig {

    @Bean
    open fun filterChain(http: HttpSecurity): SecurityFilterChain {
        http {
            oauth2Client {
                authorizationCodeGrant {
                    authorizationRequestRepository = authorizationRequestRepository()
                }
            }
        }
        return http.build()
    }
}

<http>
	<oauth2-client>
		<authorization-code-grant authorization-request-repository-ref="authorizationRequestRepository"/>
	</oauth2-client>
</http>

Requesting an Access Token

See the Access Token Request/Response protocol flow for the Authorization Code grant.

The default implementation of OAuth2AccessTokenResponseClient for the Authorization Code grant is RestClientAuthorizationCodeTokenResponseClient, which uses a RestClient instance to exchange an authorization code for an access token at the Authorization Server’s Token Endpoint.

RestClientAuthorizationCodeTokenResponseClient is very flexible and provides several options for customizing the OAuth 2.0 Access Token request and response for the Authorization Code grant. Choose from the following use cases to learn more:

I want to customize headers of the Access Token request
I want to customize parameters of the Access Token request
I want to customize the instance of RestClient that is used
I want to customize parameters of the Access Token response
I want to customize error handling of the Access Token response

Customizing the Access Token Request

RestClientAuthorizationCodeTokenResponseClient provides hooks for customizing HTTP headers and request parameters of the OAuth 2.0 Access Token Request.

Customizing Request Headers

There are two options for customizing HTTP headers:

Add additional headers by calling addHeadersConverter()
Fully customize headers by calling setHeadersConverter()

You can include additional headers without affecting the default headers added to every request using addHeadersConverter(). The following example adds a User-Agent header to the request when the registrationId is spring:

Include Additional HTTP Headers

Java
Kotlin

RestClientAuthorizationCodeTokenResponseClient accessTokenResponseClient =
	new RestClientAuthorizationCodeTokenResponseClient();
accessTokenResponseClient.addHeadersConverter(grantRequest -> {
	ClientRegistration clientRegistration = grantRequest.getClientRegistration();
	HttpHeaders headers = new HttpHeaders();
	if (clientRegistration.getRegistrationId().equals("spring")) {
		headers.set(HttpHeaders.USER_AGENT, "my-user-agent");
	}
	return headers;
});

val accessTokenResponseClient = RestClientAuthorizationCodeTokenResponseClient()
accessTokenResponseClient.addHeadersConverter { grantRequest ->
	val clientRegistration = grantRequest.getClientRegistration()
	val headers = HttpHeaders()
	if (clientRegistration.getRegistrationId() == "spring") {
        headers[HttpHeaders.USER_AGENT] = "my-user-agent"
	}
	headers
}

You can fully customize headers by re-using DefaultOAuth2TokenRequestHeadersConverter or providing a custom implementation using setHeadersConverter(). The following example re-uses DefaultOAuth2TokenRequestHeadersConverter and disables encodeClientCredentials so that HTTP Basic credentials are no longer encoded with application/x-www-form-urlencoded:

Customize HTTP Headers

Java
Kotlin

DefaultOAuth2TokenRequestHeadersConverter headersConverter =
	new DefaultOAuth2TokenRequestHeadersConverter();
headersConverter.setEncodeClientCredentials(false);

RestClientAuthorizationCodeTokenResponseClient accessTokenResponseClient =
	new RestClientAuthorizationCodeTokenResponseClient();
accessTokenResponseClient.setHeadersConverter(headersConverter);

val headersConverter = DefaultOAuth2TokenRequestHeadersConverter()
headersConverter.setEncodeClientCredentials(false)

val accessTokenResponseClient = RestClientAuthorizationCodeTokenResponseClient()
accessTokenResponseClient.setHeadersConverter(headersConverter)

Customizing Request Parameters

There are three options for customizing request parameters:

Add additional parameters by calling addParametersConverter()
Override parameters by calling setParametersConverter()
Fully customize parameters by calling setParametersCustomizer()

Using setParametersConverter() does not fully customize parameters because it would require the user to provide all default parameters themselves. Default parameters are always provided, but can be fully customized or omitted by calling setParametersCustomizer().

You can include additional parameters without affecting the default parameters added to every request using addParametersConverter(). The following example adds an audience parameter to the request when the registrationId is keycloak:

Include Additional Request Parameters

Java
Kotlin

RestClientAuthorizationCodeTokenResponseClient accessTokenResponseClient =
	new RestClientAuthorizationCodeTokenResponseClient();
accessTokenResponseClient.addParametersConverter(grantRequest -> {
	ClientRegistration clientRegistration = grantRequest.getClientRegistration();
	MultiValueMap<String, String> parameters = new LinkedMultiValueMap<String, String>();
	if (clientRegistration.getRegistrationId().equals("keycloak")) {
		parameters.set(OAuth2ParameterNames.AUDIENCE, "my-audience");
	}
	return parameters;
});

val accessTokenResponseClient = RestClientAuthorizationCodeTokenResponseClient()
accessTokenResponseClient.addParametersConverter { grantRequest ->
	val clientRegistration = grantRequest.getClientRegistration()
	val parameters = LinkedMultiValueMap<String, String>()
	if (clientRegistration.getRegistrationId() == "keycloak") {
        parameters[OAuth2ParameterNames.AUDIENCE] = "my-audience"
	}
	parameters
}

You can override default parameters using setParametersConverter(). The following example overrides the client_id parameter when the registrationId is okta:

Override Request Parameters

Java
Kotlin

RestClientAuthorizationCodeTokenResponseClient accessTokenResponseClient =
	new RestClientAuthorizationCodeTokenResponseClient();
accessTokenResponseClient.setParametersConverter(grantRequest -> {
	ClientRegistration clientRegistration = grantRequest.getClientRegistration();
	LinkedMultiValueMap<String, String> parameters = new LinkedMultiValueMap<>();
	if (clientRegistration.getRegistrationId().equals("okta")) {
		parameters.set(OAuth2ParameterNames.CLIENT_ID, "my-client");
	}
	return parameters;
});

val parametersConverter = DefaultOAuth2TokenRequestParametersConverter<OAuth2AuthorizationCodeGrantRequest>()
parametersConverter.setParametersCustomizer { parameters ->
	if (parameters.containsKey(OAuth2ParameterNames.CLIENT_ASSERTION)) {
		parameters.remove(OAuth2ParameterNames.CLIENT_ID)
	}
}

val accessTokenResponseClient = RestClientAuthorizationCodeTokenResponseClient()
accessTokenResponseClient.setParametersConverter { grantRequest ->
    val clientRegistration = grantRequest.getClientRegistration()
	val parameters = LinkedMultiValueMap<String, String>()
	if (clientRegistration.getRegistrationId() == "okta") {
        parameters[OAuth2ParameterNames.CLIENT_ID] = "my-client"
	}
	parameters
}

You can fully customize parameters (including omitting default parameters) using setParametersCustomizer(). The following example omits the client_id parameter when the client_assertion parameter is present in the request:

Omit Request Parameters

Java
Kotlin

RestClientAuthorizationCodeTokenResponseClient accessTokenResponseClient =
	new RestClientAuthorizationCodeTokenResponseClient();
accessTokenResponseClient.setParametersCustomizer(parameters -> {
	if (parameters.containsKey(OAuth2ParameterNames.CLIENT_ASSERTION)) {
		parameters.remove(OAuth2ParameterNames.CLIENT_ID);
	}
});

val accessTokenResponseClient = RestClientAuthorizationCodeTokenResponseClient()
accessTokenResponseClient.setParametersCustomizer { parameters ->
	if (parameters.containsKey(OAuth2ParameterNames.CLIENT_ASSERTION)) {
		parameters.remove(OAuth2ParameterNames.CLIENT_ID)
	}
}

Customizing the Access Token Response

RestClientAuthorizationCodeTokenResponseClient provides hooks for customizing response parameters and error handling of the OAuth 2.0 Access Token Response.

Customizing the `RestClient`

You can customize the Token Response by providing a pre-configured RestClient to setRestClient(). The default RestClient is configured as follows:

Default RestClient Configuration

Java
Kotlin

RestClient restClient = RestClient.builder()
	.messageConverters(messageConverters -> {
		messageConverters.clear();
		messageConverters.add(new FormHttpMessageConverter());
		messageConverters.add(new OAuth2AccessTokenResponseHttpMessageConverter());
	})
	.defaultStatusHandler(new OAuth2ErrorResponseErrorHandler())
	.build();

RestClientAuthorizationCodeTokenResponseClient accessTokenResponseClient =
	new RestClientAuthorizationCodeTokenResponseClient();
accessTokenResponseClient.setRestClient(restClient);

val restClient = RestClient.builder()
	.messageConverters { messageConverters ->
		messageConverters.clear()
		messageConverters.add(FormHttpMessageConverter())
		messageConverters.add(OAuth2AccessTokenResponseHttpMessageConverter())
	}
	.defaultStatusHandler(OAuth2ErrorResponseErrorHandler())
	.build()

val accessTokenResponseClient = RestClientAuthorizationCodeTokenResponseClient()
accessTokenResponseClient.setRestClient(restClient)

OAuth2AccessTokenResponseHttpMessageConverter is an HttpMessageConverter for an OAuth 2.0 Access Token Response. You can customize the conversion of Token Response parameters to an OAuth2AccessTokenResponse by calling setAccessTokenResponseConverter(). The default implementation is DefaultMapOAuth2AccessTokenResponseConverter.

OAuth2ErrorResponseErrorHandler is a ResponseErrorHandler that can handle an OAuth 2.0 Error, such as 400 Bad Request. It uses an OAuth2ErrorHttpMessageConverter for converting the OAuth 2.0 Error parameters to an OAuth2Error. You can customize the conversion of Token Response parameters to an OAuth2Error by calling setErrorConverter().

Spring MVC FormHttpMessageConverter is required, as it is used when sending the OAuth 2.0 Access Token Request.

Customizing Response Parameters

The following example provides a starting point for customizing the conversion of Token Response parameters to an OAuth2AccessTokenResponse:

Customize Access Token Response Converter

Java
Kotlin

OAuth2AccessTokenResponseHttpMessageConverter accessTokenResponseMessageConverter =
	new OAuth2AccessTokenResponseHttpMessageConverter();
accessTokenResponseMessageConverter.setAccessTokenResponseConverter(parameters -> {
	// ...
	return OAuth2AccessTokenResponse.withToken("custom-token")
		// ...
		.build();
});

val accessTokenResponseMessageConverter = OAuth2AccessTokenResponseHttpMessageConverter()
accessTokenResponseMessageConverter.setAccessTokenResponseConverter { parameters ->
	// ...
	return OAuth2AccessTokenResponse.withToken("custom-token")
		// ...
		.build()
}

Customizing Error Handling

The following example provides a starting point for customizing the conversion of Error parameters to an OAuth2Error:

Customize Access Token Error Handler

Java
Kotlin

OAuth2ErrorHttpMessageConverter errorConverter =
	new OAuth2ErrorHttpMessageConverter();
errorConverter.setErrorConverter(parameters -> {
	// ...
	return new OAuth2Error("custom-error", "custom description", "custom-uri");
});

OAuth2ErrorResponseErrorHandler errorHandler =
	new OAuth2ErrorResponseErrorHandler();
errorHandler.setErrorConverter(errorConverter);

val errorConverter = OAuth2ErrorHttpMessageConverter()
errorConverter.setErrorConverter { parameters ->
	// ...
	return OAuth2Error("custom-error", "custom description", "custom-uri")
}

val errorHandler = OAuth2ErrorResponseErrorHandler()
errorHandler.setErrorConverter(errorConverter)

Customize using the DSL

Whether you customize RestClientAuthorizationCodeTokenResponseClient or provide your own implementation of OAuth2AccessTokenResponseClient, you can configure it using the DSL (as an alternative to publishing a bean) as follows:

Access Token Response Configuration via DSL

Java
Kotlin
Xml

@Configuration
@EnableWebSecurity
public class OAuth2ClientSecurityConfig {

	@Bean
	public SecurityFilterChain filterChain(HttpSecurity http) throws Exception {
		http
			.oauth2Client((oauth2) -> oauth2
				.authorizationCodeGrant((codeGrant) -> codeGrant
					.accessTokenResponseClient(this.accessTokenResponseClient())
					// ...
				)
			);
		return http.build();
	}
}

@Configuration
@EnableWebSecurity
class OAuth2ClientSecurityConfig {

    @Bean
    open fun filterChain(http: HttpSecurity): SecurityFilterChain {
        http {
            oauth2Client {
                authorizationCodeGrant {
                    accessTokenResponseClient = accessTokenResponseClient()
                }
            }
        }
        return http.build()
    }
}

<http>
	<oauth2-client>
		<authorization-code-grant access-token-response-client-ref="accessTokenResponseClient"/>
	</oauth2-client>
</http>

Refresh Token

See the OAuth 2.0 Authorization Framework for further details on the Refresh Token.

Refreshing an Access Token

See the Access Token Request/Response protocol flow for the Refresh Token grant.

The default implementation of OAuth2AccessTokenResponseClient for the Refresh Token grant is RestClientRefreshTokenTokenResponseClient, which uses a RestClient instance to obtain an access token at the Authorization Server’s Token Endpoint.

RestClientRefreshTokenTokenResponseClient is very flexible and provides several options for customizing the OAuth 2.0 Access Token request and response for the Refresh Token grant. Choose from the following use cases to learn more:

I want to customize headers of the Access Token request
I want to customize parameters of the Access Token request
I want to customize the instance of RestClient that is used
I want to customize parameters of the Access Token response
I want to customize error handling of the Access Token response

Customizing the Access Token Request

RestClientRefreshTokenTokenResponseClient provides hooks for customizing HTTP headers and request parameters of the OAuth 2.0 Access Token Request.

Customizing Request Headers

There are two options for customizing HTTP headers:

Add additional headers by calling addHeadersConverter()
Fully customize headers by calling setHeadersConverter()

Include Additional HTTP Headers

Java
Kotlin

RestClientRefreshTokenTokenResponseClient accessTokenResponseClient =
	new RestClientRefreshTokenTokenResponseClient();
accessTokenResponseClient.addHeadersConverter(grantRequest -> {
	ClientRegistration clientRegistration = grantRequest.getClientRegistration();
	HttpHeaders headers = new HttpHeaders();
	if (clientRegistration.getRegistrationId().equals("spring")) {
		headers.set(HttpHeaders.USER_AGENT, "my-user-agent");
	}
	return headers;
});

val accessTokenResponseClient = RestClientRefreshTokenTokenResponseClient()
accessTokenResponseClient.addHeadersConverter { grantRequest ->
	val clientRegistration = grantRequest.getClientRegistration()
	val headers = HttpHeaders()
	if (clientRegistration.getRegistrationId() == "spring") {
        headers[HttpHeaders.USER_AGENT] = "my-user-agent"
	}
	headers
}

Customize HTTP Headers

Java
Kotlin

DefaultOAuth2TokenRequestHeadersConverter headersConverter =
	new DefaultOAuth2TokenRequestHeadersConverter();
headersConverter.setEncodeClientCredentials(false);

RestClientRefreshTokenTokenResponseClient accessTokenResponseClient =
	new RestClientRefreshTokenTokenResponseClient();
accessTokenResponseClient.setHeadersConverter(headersConverter);

val headersConverter = DefaultOAuth2TokenRequestHeadersConverter()
headersConverter.setEncodeClientCredentials(false)

val accessTokenResponseClient = RestClientRefreshTokenTokenResponseClient()
accessTokenResponseClient.setHeadersConverter(headersConverter)

Customizing Request Parameters

There are three options for customizing request parameters:

Add additional parameters by calling addParametersConverter()
Override parameters by calling setParametersConverter()
Fully customize parameters by calling setParametersCustomizer()

Include Additional Request Parameters

Java
Kotlin

RestClientRefreshTokenTokenResponseClient accessTokenResponseClient =
	new RestClientRefreshTokenTokenResponseClient();
accessTokenResponseClient.addParametersConverter(grantRequest -> {
	ClientRegistration clientRegistration = grantRequest.getClientRegistration();
	MultiValueMap<String, String> parameters = new LinkedMultiValueMap<String, String>();
	if (clientRegistration.getRegistrationId().equals("keycloak")) {
		parameters.set(OAuth2ParameterNames.AUDIENCE, "my-audience");
	}
	return parameters;
});

val accessTokenResponseClient = RestClientRefreshTokenTokenResponseClient()
accessTokenResponseClient.addParametersConverter { grantRequest ->
	val clientRegistration = grantRequest.getClientRegistration()
	val parameters = LinkedMultiValueMap<String, String>()
	if (clientRegistration.getRegistrationId() == "keycloak") {
        parameters[OAuth2ParameterNames.AUDIENCE] = "my-audience"
	}
	parameters
}

You can override default parameters using setParametersConverter(). The following example overrides the client_id parameter when the registrationId is okta:

Override Request Parameters

Java
Kotlin

RestClientRefreshTokenTokenResponseClient accessTokenResponseClient =
	new RestClientRefreshTokenTokenResponseClient();
accessTokenResponseClient.setParametersConverter(grantRequest -> {
	ClientRegistration clientRegistration = grantRequest.getClientRegistration();
	LinkedMultiValueMap<String, String> parameters = new LinkedMultiValueMap<>();
	if (clientRegistration.getRegistrationId().equals("okta")) {
		parameters.set(OAuth2ParameterNames.CLIENT_ID, "my-client");
	}
	return parameters;
});

val parametersConverter = DefaultOAuth2TokenRequestParametersConverter<OAuth2RefreshTokenGrantRequest>()
parametersConverter.setParametersCustomizer { parameters ->
	if (parameters.containsKey(OAuth2ParameterNames.CLIENT_ASSERTION)) {
		parameters.remove(OAuth2ParameterNames.CLIENT_ID)
	}
}

val accessTokenResponseClient = RestClientRefreshTokenTokenResponseClient()
accessTokenResponseClient.setParametersConverter { grantRequest ->
    val clientRegistration = grantRequest.getClientRegistration()
	val parameters = LinkedMultiValueMap<String, String>()
	if (clientRegistration.getRegistrationId() == "okta") {
        parameters[OAuth2ParameterNames.CLIENT_ID] = "my-client"
	}
	parameters
}

Omit Request Parameters

Java
Kotlin

RestClientRefreshTokenTokenResponseClient accessTokenResponseClient =
	new RestClientRefreshTokenTokenResponseClient();
accessTokenResponseClient.setParametersCustomizer(parameters -> {
	if (parameters.containsKey(OAuth2ParameterNames.CLIENT_ASSERTION)) {
		parameters.remove(OAuth2ParameterNames.CLIENT_ID);
	}
});

val accessTokenResponseClient = RestClientRefreshTokenTokenResponseClient()
accessTokenResponseClient.setParametersCustomizer { parameters ->
	if (parameters.containsKey(OAuth2ParameterNames.CLIENT_ASSERTION)) {
		parameters.remove(OAuth2ParameterNames.CLIENT_ID)
	}
}

Customizing the Access Token Response

RestClientRefreshTokenTokenResponseClient provides hooks for customizing response parameters and error handling of the OAuth 2.0 Access Token Response.

Customizing the `RestClient`

You can customize the Token Response by providing a pre-configured RestClient to setRestClient(). The default RestClient is configured as follows:

Default RestClient Configuration

Java
Kotlin

RestClient restClient = RestClient.builder()
	.messageConverters(messageConverters -> {
		messageConverters.clear();
		messageConverters.add(new FormHttpMessageConverter());
		messageConverters.add(new OAuth2AccessTokenResponseHttpMessageConverter());
	})
	.defaultStatusHandler(new OAuth2ErrorResponseErrorHandler())
	.build();

RestClientRefreshTokenTokenResponseClient accessTokenResponseClient =
	new RestClientRefreshTokenTokenResponseClient();
accessTokenResponseClient.setRestClient(restClient);

val restClient = RestClient.builder()
	.messageConverters { messageConverters ->
		messageConverters.clear()
		messageConverters.add(FormHttpMessageConverter())
		messageConverters.add(OAuth2AccessTokenResponseHttpMessageConverter())
	}
	.defaultStatusHandler(OAuth2ErrorResponseErrorHandler())
	.build()

val accessTokenResponseClient = RestClientRefreshTokenTokenResponseClient()
accessTokenResponseClient.setRestClient(restClient)

Spring MVC FormHttpMessageConverter is required, as it is used when sending the OAuth 2.0 Access Token Request.

Customizing Response Parameters

The following example provides a starting point for customizing the conversion of Token Response parameters to an OAuth2AccessTokenResponse:

Customize Access Token Response Converter

Java
Kotlin

OAuth2AccessTokenResponseHttpMessageConverter accessTokenResponseMessageConverter =
	new OAuth2AccessTokenResponseHttpMessageConverter();
accessTokenResponseMessageConverter.setAccessTokenResponseConverter(parameters -> {
	// ...
	return OAuth2AccessTokenResponse.withToken("custom-token")
		// ...
		.build();
});

val accessTokenResponseMessageConverter = OAuth2AccessTokenResponseHttpMessageConverter()
accessTokenResponseMessageConverter.setAccessTokenResponseConverter { parameters ->
	// ...
	return OAuth2AccessTokenResponse.withToken("custom-token")
		// ...
		.build()
}

Customizing Error Handling

The following example provides a starting point for customizing the conversion of Error parameters to an OAuth2Error:

Customize Access Token Error Handler

Java
Kotlin

OAuth2ErrorHttpMessageConverter errorConverter =
	new OAuth2ErrorHttpMessageConverter();
errorConverter.setErrorConverter(parameters -> {
	// ...
	return new OAuth2Error("custom-error", "custom description", "custom-uri");
});

OAuth2ErrorResponseErrorHandler errorHandler =
	new OAuth2ErrorResponseErrorHandler();
errorHandler.setErrorConverter(errorConverter);

val errorConverter = OAuth2ErrorHttpMessageConverter()
errorConverter.setErrorConverter { parameters ->
	// ...
	return OAuth2Error("custom-error", "custom description", "custom-uri")
}

val errorHandler = OAuth2ErrorResponseErrorHandler()
errorHandler.setErrorConverter(errorConverter)

Customize using the Builder

Whether you customize RestClientRefreshTokenTokenResponseClient or provide your own implementation of OAuth2AccessTokenResponseClient, you can configure it using the OAuth2AuthorizedClientProviderBuilder (as an alternative to publishing a bean) as follows:

Access Token Response Configuration via Builder

Java
Kotlin

// Customize
OAuth2AccessTokenResponseClient<OAuth2RefreshTokenGrantRequest> refreshTokenTokenResponseClient = ...

OAuth2AuthorizedClientProvider authorizedClientProvider =
		OAuth2AuthorizedClientProviderBuilder.builder()
				.authorizationCode()
				.refreshToken((configurer) -> configurer.accessTokenResponseClient(refreshTokenTokenResponseClient))
				.build();

// ...

authorizedClientManager.setAuthorizedClientProvider(authorizedClientProvider);

// Customize
val refreshTokenTokenResponseClient: OAuth2AccessTokenResponseClient<OAuth2RefreshTokenGrantRequest> = ...

val authorizedClientProvider = OAuth2AuthorizedClientProviderBuilder.builder()
        .authorizationCode()
        .refreshToken { it.accessTokenResponseClient(refreshTokenTokenResponseClient) }
        .build()

// ...

authorizedClientManager.setAuthorizedClientProvider(authorizedClientProvider)

OAuth2AuthorizedClientProviderBuilder.builder().refreshToken() configures a RefreshTokenOAuth2AuthorizedClientProvider, which is an implementation of an OAuth2AuthorizedClientProvider for the Refresh Token grant.

The OAuth2RefreshToken can optionally be returned in the Access Token Response for the authorization_code grant type. If the OAuth2AuthorizedClient.getRefreshToken() is available and the OAuth2AuthorizedClient.getAccessToken() is expired, it is automatically refreshed by the RefreshTokenOAuth2AuthorizedClientProvider.

Client Credentials

Please refer to the OAuth 2.0 Authorization Framework for further details on the Client Credentials grant.

Requesting an Access Token

See the Access Token Request/Response protocol flow for the Client Credentials grant.

The default implementation of OAuth2AccessTokenResponseClient for the Client Credentials grant is RestClientClientCredentialsTokenResponseClient, which uses a RestClient instance to obtain an access token at the Authorization Server’s Token Endpoint.

RestClientClientCredentialsTokenResponseClient is very flexible and provides several options for customizing the OAuth 2.0 Access Token request and response for the Client Credentials grant. Choose from the following use cases to learn more:

I want to customize headers of the Access Token request
I want to customize parameters of the Access Token request
I want to customize the instance of RestClient that is used
I want to customize parameters of the Access Token response
I want to customize error handling of the Access Token response

Customizing the Access Token Request

RestClientClientCredentialsTokenResponseClient provides hooks for customizing HTTP headers and request parameters of the OAuth 2.0 Access Token Request.

Customizing Request Headers

There are two options for customizing HTTP headers:

Add additional headers by calling addHeadersConverter()
Fully customize headers by calling setHeadersConverter()

Include Additional HTTP Headers

Java
Kotlin

RestClientClientCredentialsTokenResponseClient accessTokenResponseClient =
	new RestClientClientCredentialsTokenResponseClient();
accessTokenResponseClient.addHeadersConverter(grantRequest -> {
	ClientRegistration clientRegistration = grantRequest.getClientRegistration();
	HttpHeaders headers = new HttpHeaders();
	if (clientRegistration.getRegistrationId().equals("spring")) {
		headers.set(HttpHeaders.USER_AGENT, "my-user-agent");
	}
	return headers;
});

val accessTokenResponseClient = RestClientClientCredentialsTokenResponseClient()
accessTokenResponseClient.addHeadersConverter { grantRequest ->
	val clientRegistration = grantRequest.getClientRegistration()
	val headers = HttpHeaders()
	if (clientRegistration.getRegistrationId() == "spring") {
        headers[HttpHeaders.USER_AGENT] = "my-user-agent"
	}
	headers
}

Customize HTTP Headers

Java
Kotlin

DefaultOAuth2TokenRequestHeadersConverter headersConverter =
	new DefaultOAuth2TokenRequestHeadersConverter();
headersConverter.setEncodeClientCredentials(false);

RestClientClientCredentialsTokenResponseClient accessTokenResponseClient =
	new RestClientClientCredentialsTokenResponseClient();
accessTokenResponseClient.setHeadersConverter(headersConverter);

val headersConverter = DefaultOAuth2TokenRequestHeadersConverter()
headersConverter.setEncodeClientCredentials(false)

val accessTokenResponseClient = RestClientClientCredentialsTokenResponseClient()
accessTokenResponseClient.setHeadersConverter(headersConverter)

Customizing Request Parameters

There are three options for customizing request parameters:

Add additional parameters by calling addParametersConverter()
Override parameters by calling setParametersConverter()
Fully customize parameters by calling setParametersCustomizer()

Include Additional Request Parameters

Java
Kotlin

RestClientClientCredentialsTokenResponseClient accessTokenResponseClient =
	new RestClientClientCredentialsTokenResponseClient();
accessTokenResponseClient.addParametersConverter(grantRequest -> {
	ClientRegistration clientRegistration = grantRequest.getClientRegistration();
	MultiValueMap<String, String> parameters = new LinkedMultiValueMap<String, String>();
	if (clientRegistration.getRegistrationId().equals("keycloak")) {
		parameters.set(OAuth2ParameterNames.AUDIENCE, "my-audience");
	}
	return parameters;
});

val accessTokenResponseClient = RestClientClientCredentialsTokenResponseClient()
accessTokenResponseClient.addParametersConverter { grantRequest ->
	val clientRegistration = grantRequest.getClientRegistration()
	val parameters = LinkedMultiValueMap<String, String>()
	if (clientRegistration.getRegistrationId() == "keycloak") {
        parameters[OAuth2ParameterNames.AUDIENCE] = "my-audience"
	}
	parameters
}

You can override default parameters using setParametersConverter(). The following example overrides the client_id parameter when the registrationId is okta:

Override Request Parameters

Java
Kotlin

RestClientClientCredentialsTokenResponseClient accessTokenResponseClient =
	new RestClientClientCredentialsTokenResponseClient();
accessTokenResponseClient.setParametersConverter(grantRequest -> {
	ClientRegistration clientRegistration = grantRequest.getClientRegistration();
	LinkedMultiValueMap<String, String> parameters = new LinkedMultiValueMap<>();
	if (clientRegistration.getRegistrationId().equals("okta")) {
		parameters.set(OAuth2ParameterNames.CLIENT_ID, "my-client");
	}
	return parameters;
});

val parametersConverter = DefaultOAuth2TokenRequestParametersConverter<OAuth2ClientCredentialsGrantRequest>()
parametersConverter.setParametersCustomizer { parameters ->
	if (parameters.containsKey(OAuth2ParameterNames.CLIENT_ASSERTION)) {
		parameters.remove(OAuth2ParameterNames.CLIENT_ID)
	}
}

val accessTokenResponseClient = RestClientClientCredentialsTokenResponseClient()
accessTokenResponseClient.setParametersConverter { grantRequest ->
    val clientRegistration = grantRequest.getClientRegistration()
	val parameters = LinkedMultiValueMap<String, String>()
	if (clientRegistration.getRegistrationId() == "okta") {
        parameters[OAuth2ParameterNames.CLIENT_ID] = "my-client"
	}
	parameters
}

Omit Request Parameters

Java
Kotlin

RestClientClientCredentialsTokenResponseClient accessTokenResponseClient =
	new RestClientClientCredentialsTokenResponseClient();
accessTokenResponseClient.setParametersCustomizer(parameters -> {
	if (parameters.containsKey(OAuth2ParameterNames.CLIENT_ASSERTION)) {
		parameters.remove(OAuth2ParameterNames.CLIENT_ID);
	}
});

val accessTokenResponseClient = RestClientClientCredentialsTokenResponseClient()
accessTokenResponseClient.setParametersCustomizer { parameters ->
	if (parameters.containsKey(OAuth2ParameterNames.CLIENT_ASSERTION)) {
		parameters.remove(OAuth2ParameterNames.CLIENT_ID)
	}
}

Customizing the Access Token Response

RestClientClientCredentialsTokenResponseClient provides hooks for customizing response parameters and error handling of the OAuth 2.0 Access Token Response.

Customizing the `RestClient`

You can customize the Token Response by providing a pre-configured RestClient to setRestClient(). The default RestClient is configured as follows:

Default RestClient Configuration

Java
Kotlin

RestClient restClient = RestClient.builder()
	.messageConverters(messageConverters -> {
		messageConverters.clear();
		messageConverters.add(new FormHttpMessageConverter());
		messageConverters.add(new OAuth2AccessTokenResponseHttpMessageConverter());
	})
	.defaultStatusHandler(new OAuth2ErrorResponseErrorHandler())
	.build();

RestClientClientCredentialsTokenResponseClient accessTokenResponseClient =
	new RestClientClientCredentialsTokenResponseClient();
accessTokenResponseClient.setRestClient(restClient);

val restClient = RestClient.builder()
	.messageConverters { messageConverters ->
		messageConverters.clear()
		messageConverters.add(FormHttpMessageConverter())
		messageConverters.add(OAuth2AccessTokenResponseHttpMessageConverter())
	}
	.defaultStatusHandler(OAuth2ErrorResponseErrorHandler())
	.build()

val accessTokenResponseClient = RestClientClientCredentialsTokenResponseClient()
accessTokenResponseClient.setRestClient(restClient)

Spring MVC FormHttpMessageConverter is required, as it is used when sending the OAuth 2.0 Access Token Request.

Customizing Response Parameters

The following example provides a starting point for customizing the conversion of Token Response parameters to an OAuth2AccessTokenResponse:

Customize Access Token Response Converter

Java
Kotlin

OAuth2AccessTokenResponseHttpMessageConverter accessTokenResponseMessageConverter =
	new OAuth2AccessTokenResponseHttpMessageConverter();
accessTokenResponseMessageConverter.setAccessTokenResponseConverter(parameters -> {
	// ...
	return OAuth2AccessTokenResponse.withToken("custom-token")
		// ...
		.build();
});

val accessTokenResponseMessageConverter = OAuth2AccessTokenResponseHttpMessageConverter()
accessTokenResponseMessageConverter.setAccessTokenResponseConverter { parameters ->
	// ...
	return OAuth2AccessTokenResponse.withToken("custom-token")
		// ...
		.build()
}

Customizing Error Handling

The following example provides a starting point for customizing the conversion of Error parameters to an OAuth2Error:

Customize Access Token Error Handler

Java
Kotlin

OAuth2ErrorHttpMessageConverter errorConverter =
	new OAuth2ErrorHttpMessageConverter();
errorConverter.setErrorConverter(parameters -> {
	// ...
	return new OAuth2Error("custom-error", "custom description", "custom-uri");
});

OAuth2ErrorResponseErrorHandler errorHandler =
	new OAuth2ErrorResponseErrorHandler();
errorHandler.setErrorConverter(errorConverter);

val errorConverter = OAuth2ErrorHttpMessageConverter()
errorConverter.setErrorConverter { parameters ->
	// ...
	return OAuth2Error("custom-error", "custom description", "custom-uri")
}

val errorHandler = OAuth2ErrorResponseErrorHandler()
errorHandler.setErrorConverter(errorConverter)

Customize using the Builder

Whether you customize RestClientClientCredentialsTokenResponseClient or provide your own implementation of OAuth2AccessTokenResponseClient, you can configure it using the OAuth2AuthorizedClientProviderBuilder (as an alternative to publishing a bean) as follows:

Access Token Response Configuration via Builder

Java
Kotlin

// Customize
OAuth2AccessTokenResponseClient<OAuth2ClientCredentialsGrantRequest> clientCredentialsTokenResponseClient = ...

OAuth2AuthorizedClientProvider authorizedClientProvider =
		OAuth2AuthorizedClientProviderBuilder.builder()
				.clientCredentials((configurer) -> configurer.accessTokenResponseClient(clientCredentialsTokenResponseClient))
				.build();

// ...

authorizedClientManager.setAuthorizedClientProvider(authorizedClientProvider);

// Customize
val clientCredentialsTokenResponseClient: OAuth2AccessTokenResponseClient<OAuth2ClientCredentialsGrantRequest> = ...

val authorizedClientProvider = OAuth2AuthorizedClientProviderBuilder.builder()
        .clientCredentials { it.accessTokenResponseClient(clientCredentialsTokenResponseClient) }
        .build()

// ...

authorizedClientManager.setAuthorizedClientProvider(authorizedClientProvider)

OAuth2AuthorizedClientProviderBuilder.builder().clientCredentials() configures a ClientCredentialsOAuth2AuthorizedClientProvider, which is an implementation of an OAuth2AuthorizedClientProvider for the Client Credentials grant.

Using the Access Token

Consider the following Spring Boot properties for an OAuth 2.0 Client registration:

spring:
  security:
    oauth2:
      client:
        registration:
          okta:
            client-id: okta-client-id
            client-secret: okta-client-secret
            authorization-grant-type: client_credentials
            scope: read, write
        provider:
          okta:
            token-uri: https://dev-1234.oktapreview.com/oauth2/v1/token

Further consider the following OAuth2AuthorizedClientManager @Bean:

Java
Kotlin

@Bean
public OAuth2AuthorizedClientManager authorizedClientManager(
		ClientRegistrationRepository clientRegistrationRepository,
		OAuth2AuthorizedClientRepository authorizedClientRepository) {

	OAuth2AuthorizedClientProvider authorizedClientProvider =
			OAuth2AuthorizedClientProviderBuilder.builder()
					.clientCredentials()
					.build();

	DefaultOAuth2AuthorizedClientManager authorizedClientManager =
			new DefaultOAuth2AuthorizedClientManager(
					clientRegistrationRepository, authorizedClientRepository);
	authorizedClientManager.setAuthorizedClientProvider(authorizedClientProvider);

	return authorizedClientManager;
}

@Bean
fun authorizedClientManager(
        clientRegistrationRepository: ClientRegistrationRepository,
        authorizedClientRepository: OAuth2AuthorizedClientRepository): OAuth2AuthorizedClientManager {
    val authorizedClientProvider = OAuth2AuthorizedClientProviderBuilder.builder()
            .clientCredentials()
            .build()
    val authorizedClientManager = DefaultOAuth2AuthorizedClientManager(
            clientRegistrationRepository, authorizedClientRepository)
    authorizedClientManager.setAuthorizedClientProvider(authorizedClientProvider)
    return authorizedClientManager
}

Given the preceding properties and bean, you can obtain the OAuth2AccessToken as follows:

Java
Kotlin

@Controller
public class OAuth2ClientController {

	@Autowired
	private OAuth2AuthorizedClientManager authorizedClientManager;

	@GetMapping("/")
	public String index(Authentication authentication,
						HttpServletRequest servletRequest,
						HttpServletResponse servletResponse) {

		OAuth2AuthorizeRequest authorizeRequest = OAuth2AuthorizeRequest.withClientRegistrationId("okta")
				.principal(authentication)
				.attributes(attrs -> {
					attrs.put(HttpServletRequest.class.getName(), servletRequest);
					attrs.put(HttpServletResponse.class.getName(), servletResponse);
				})
				.build();
		OAuth2AuthorizedClient authorizedClient = this.authorizedClientManager.authorize(authorizeRequest);

		OAuth2AccessToken accessToken = authorizedClient.getAccessToken();

		// ...

		return "index";
	}
}

class OAuth2ClientController {

    @Autowired
    private lateinit var authorizedClientManager: OAuth2AuthorizedClientManager

    @GetMapping("/")
    fun index(authentication: Authentication?,
              servletRequest: HttpServletRequest,
              servletResponse: HttpServletResponse): String {
        val authorizeRequest: OAuth2AuthorizeRequest = OAuth2AuthorizeRequest.withClientRegistrationId("okta")
                .principal(authentication)
                .attributes(Consumer { attrs: MutableMap<String, Any> ->
                    attrs[HttpServletRequest::class.java.name] = servletRequest
                    attrs[HttpServletResponse::class.java.name] = servletResponse
                })
                .build()
        val authorizedClient = authorizedClientManager.authorize(authorizeRequest)
        val accessToken: OAuth2AccessToken = authorizedClient.accessToken

        // ...

        return "index"
    }
}

HttpServletRequest and HttpServletResponse are both OPTIONAL attributes. If not provided, they default to ServletRequestAttributes by using RequestContextHolder.getRequestAttributes().

JWT Bearer

Please refer to JSON Web Token (JWT) Profile for OAuth 2.0 Client Authentication and Authorization Grants for further details on the JWT Bearer grant.

Requesting an Access Token

Please refer to the Access Token Request/Response protocol flow for the JWT Bearer grant.

The default implementation of OAuth2AccessTokenResponseClient for the JWT Bearer grant is RestClientJwtBearerTokenResponseClient, which uses a RestClient instance to obtain an access token at the Authorization Server’s Token Endpoint.

RestClientJwtBearerTokenResponseClient is very flexible and provides several options for customizing the OAuth 2.0 Access Token request and response for the JWT Bearer grant. Choose from the following use cases to learn more:

I want to customize headers of the Access Token request
I want to customize parameters of the Access Token request
I want to customize the instance of RestClient that is used
I want to customize parameters of the Access Token response
I want to customize error handling of the Access Token response

Customizing the Access Token Request

RestClientJwtBearerTokenResponseClient provides hooks for customizing HTTP headers and request parameters of the OAuth 2.0 Access Token Request.

Customizing Request Headers

There are two options for customizing HTTP headers:

Add additional headers by calling addHeadersConverter()
Fully customize headers by calling setHeadersConverter()

Include Additional HTTP Headers

Java
Kotlin

RestClientJwtBearerTokenResponseClient accessTokenResponseClient =
	new RestClientJwtBearerTokenResponseClient();
accessTokenResponseClient.addHeadersConverter(grantRequest -> {
	ClientRegistration clientRegistration = grantRequest.getClientRegistration();
	HttpHeaders headers = new HttpHeaders();
	if (clientRegistration.getRegistrationId().equals("spring")) {
		headers.set(HttpHeaders.USER_AGENT, "my-user-agent");
	}
	return headers;
});

val accessTokenResponseClient = RestClientJwtBearerTokenResponseClient()
accessTokenResponseClient.addHeadersConverter { grantRequest ->
	val clientRegistration = grantRequest.getClientRegistration()
	val headers = HttpHeaders()
	if (clientRegistration.getRegistrationId() == "spring") {
        headers[HttpHeaders.USER_AGENT] = "my-user-agent"
	}
	headers
}

Customize HTTP Headers

Java
Kotlin

DefaultOAuth2TokenRequestHeadersConverter headersConverter =
	new DefaultOAuth2TokenRequestHeadersConverter();
headersConverter.setEncodeClientCredentials(false);

RestClientJwtBearerTokenResponseClient accessTokenResponseClient =
	new RestClientJwtBearerTokenResponseClient();
accessTokenResponseClient.setHeadersConverter(headersConverter);

val headersConverter = DefaultOAuth2TokenRequestHeadersConverter()
headersConverter.setEncodeClientCredentials(false)

val accessTokenResponseClient = RestClientJwtBearerTokenResponseClient()
accessTokenResponseClient.setHeadersConverter(headersConverter)

Customizing Request Parameters

There are three options for customizing request parameters:

Add additional parameters by calling addParametersConverter()
Override parameters by calling setParametersConverter()
Fully customize parameters by calling setParametersCustomizer()

Include Additional Request Parameters

Java
Kotlin

RestClientJwtBearerTokenResponseClient accessTokenResponseClient =
	new RestClientJwtBearerTokenResponseClient();
accessTokenResponseClient.addParametersConverter(grantRequest -> {
	ClientRegistration clientRegistration = grantRequest.getClientRegistration();
	MultiValueMap<String, String> parameters = new LinkedMultiValueMap<String, String>();
	if (clientRegistration.getRegistrationId().equals("keycloak")) {
		parameters.set(OAuth2ParameterNames.AUDIENCE, "my-audience");
	}
	return parameters;
});

val accessTokenResponseClient = RestClientJwtBearerTokenResponseClient()
accessTokenResponseClient.addParametersConverter { grantRequest ->
	val clientRegistration = grantRequest.getClientRegistration()
	val parameters = LinkedMultiValueMap<String, String>()
	if (clientRegistration.getRegistrationId() == "keycloak") {
        parameters[OAuth2ParameterNames.AUDIENCE] = "my-audience"
	}
	parameters
}

You can override default parameters using setParametersConverter(). The following example overrides the client_id parameter when the registrationId is okta:

Override Request Parameters

Java
Kotlin

RestClientJwtBearerTokenResponseClient accessTokenResponseClient =
	new RestClientJwtBearerTokenResponseClient();
accessTokenResponseClient.setParametersConverter(grantRequest -> {
	ClientRegistration clientRegistration = grantRequest.getClientRegistration();
	LinkedMultiValueMap<String, String> parameters = new LinkedMultiValueMap<>();
	if (clientRegistration.getRegistrationId().equals("okta")) {
		parameters.set(OAuth2ParameterNames.CLIENT_ID, "my-client");
	}
	return parameters;
});

val parametersConverter = DefaultOAuth2TokenRequestParametersConverter<JwtBearerGrantRequest>()
parametersConverter.setParametersCustomizer { parameters ->
	if (parameters.containsKey(OAuth2ParameterNames.CLIENT_ASSERTION)) {
		parameters.remove(OAuth2ParameterNames.CLIENT_ID)
	}
}

val accessTokenResponseClient = RestClientJwtBearerTokenResponseClient()
accessTokenResponseClient.setParametersConverter { grantRequest ->
    val clientRegistration = grantRequest.getClientRegistration()
	val parameters = LinkedMultiValueMap<String, String>()
	if (clientRegistration.getRegistrationId() == "okta") {
        parameters[OAuth2ParameterNames.CLIENT_ID] = "my-client"
	}
	parameters
}

Omit Request Parameters

Java
Kotlin

RestClientJwtBearerTokenResponseClient accessTokenResponseClient =
	new RestClientJwtBearerTokenResponseClient();
accessTokenResponseClient.setParametersCustomizer(parameters -> {
	if (parameters.containsKey(OAuth2ParameterNames.CLIENT_ASSERTION)) {
		parameters.remove(OAuth2ParameterNames.CLIENT_ID);
	}
});

val accessTokenResponseClient = RestClientJwtBearerTokenResponseClient()
accessTokenResponseClient.setParametersCustomizer { parameters ->
	if (parameters.containsKey(OAuth2ParameterNames.CLIENT_ASSERTION)) {
		parameters.remove(OAuth2ParameterNames.CLIENT_ID)
	}
}

Customizing the Access Token Response

RestClientJwtBearerTokenResponseClient provides hooks for customizing response parameters and error handling of the OAuth 2.0 Access Token Response.

Customizing the `RestClient`

You can customize the Token Response by providing a pre-configured RestClient to setRestClient(). The default RestClient is configured as follows:

Default RestClient Configuration

Java
Kotlin

RestClient restClient = RestClient.builder()
	.messageConverters(messageConverters -> {
		messageConverters.clear();
		messageConverters.add(new FormHttpMessageConverter());
		messageConverters.add(new OAuth2AccessTokenResponseHttpMessageConverter());
	})
	.defaultStatusHandler(new OAuth2ErrorResponseErrorHandler())
	.build();

RestClientJwtBearerTokenResponseClient accessTokenResponseClient =
	new RestClientJwtBearerTokenResponseClient();
accessTokenResponseClient.setRestClient(restClient);

val restClient = RestClient.builder()
	.messageConverters { messageConverters ->
		messageConverters.clear()
		messageConverters.add(FormHttpMessageConverter())
		messageConverters.add(OAuth2AccessTokenResponseHttpMessageConverter())
	}
	.defaultStatusHandler(OAuth2ErrorResponseErrorHandler())
	.build()

val accessTokenResponseClient = RestClientJwtBearerTokenResponseClient()
accessTokenResponseClient.setRestClient(restClient)

Spring MVC FormHttpMessageConverter is required, as it is used when sending the OAuth 2.0 Access Token Request.

Customizing Response Parameters

The following example provides a starting point for customizing the conversion of Token Response parameters to an OAuth2AccessTokenResponse:

Customize Access Token Response Converter

Java
Kotlin

OAuth2AccessTokenResponseHttpMessageConverter accessTokenResponseMessageConverter =
	new OAuth2AccessTokenResponseHttpMessageConverter();
accessTokenResponseMessageConverter.setAccessTokenResponseConverter(parameters -> {
	// ...
	return OAuth2AccessTokenResponse.withToken("custom-token")
		// ...
		.build();
});

val accessTokenResponseMessageConverter = OAuth2AccessTokenResponseHttpMessageConverter()
accessTokenResponseMessageConverter.setAccessTokenResponseConverter { parameters ->
	// ...
	return OAuth2AccessTokenResponse.withToken("custom-token")
		// ...
		.build()
}

Customizing Error Handling

The following example provides a starting point for customizing the conversion of Error parameters to an OAuth2Error:

Customize Access Token Error Handler

Java
Kotlin

OAuth2ErrorHttpMessageConverter errorConverter =
	new OAuth2ErrorHttpMessageConverter();
errorConverter.setErrorConverter(parameters -> {
	// ...
	return new OAuth2Error("custom-error", "custom description", "custom-uri");
});

OAuth2ErrorResponseErrorHandler errorHandler =
	new OAuth2ErrorResponseErrorHandler();
errorHandler.setErrorConverter(errorConverter);

val errorConverter = OAuth2ErrorHttpMessageConverter()
errorConverter.setErrorConverter { parameters ->
	// ...
	return OAuth2Error("custom-error", "custom description", "custom-uri")
}

val errorHandler = OAuth2ErrorResponseErrorHandler()
errorHandler.setErrorConverter(errorConverter)

Customize using the Builder

Whether you customize RestClientJwtBearerTokenResponseClient or provide your own implementation of OAuth2AccessTokenResponseClient, you can configure it using the OAuth2AuthorizedClientProviderBuilder (as an alternative to publishing a bean) as follows:

Access Token Response Configuration via Builder

Java
Kotlin

// Customize
OAuth2AccessTokenResponseClient<JwtBearerGrantRequest> jwtBearerTokenResponseClient = ...

JwtBearerOAuth2AuthorizedClientProvider jwtBearerAuthorizedClientProvider = new JwtBearerOAuth2AuthorizedClientProvider();
jwtBearerAuthorizedClientProvider.setAccessTokenResponseClient(jwtBearerTokenResponseClient);

OAuth2AuthorizedClientProvider authorizedClientProvider =
		OAuth2AuthorizedClientProviderBuilder.builder()
				.provider(jwtBearerAuthorizedClientProvider)
				.build();

// ...

authorizedClientManager.setAuthorizedClientProvider(authorizedClientProvider);

// Customize
val jwtBearerTokenResponseClient: OAuth2AccessTokenResponseClient<JwtBearerGrantRequest> = ...

val jwtBearerAuthorizedClientProvider = JwtBearerOAuth2AuthorizedClientProvider()
jwtBearerAuthorizedClientProvider.setAccessTokenResponseClient(jwtBearerTokenResponseClient)

val authorizedClientProvider = OAuth2AuthorizedClientProviderBuilder.builder()
        .provider(jwtBearerAuthorizedClientProvider)
        .build()

// ...

authorizedClientManager.setAuthorizedClientProvider(authorizedClientProvider)

Using the Access Token

Given the following Spring Boot properties for an OAuth 2.0 Client registration:

spring:
  security:
    oauth2:
      client:
        registration:
          okta:
            client-id: okta-client-id
            client-secret: okta-client-secret
            authorization-grant-type: urn:ietf:params:oauth:grant-type:jwt-bearer
            scope: read
        provider:
          okta:
            token-uri: https://dev-1234.oktapreview.com/oauth2/v1/token

…and the OAuth2AuthorizedClientManager @Bean:

Java
Kotlin

@Bean
public OAuth2AuthorizedClientManager authorizedClientManager(
		ClientRegistrationRepository clientRegistrationRepository,
		OAuth2AuthorizedClientRepository authorizedClientRepository) {

	JwtBearerOAuth2AuthorizedClientProvider jwtBearerAuthorizedClientProvider =
			new JwtBearerOAuth2AuthorizedClientProvider();

	OAuth2AuthorizedClientProvider authorizedClientProvider =
			OAuth2AuthorizedClientProviderBuilder.builder()
					.provider(jwtBearerAuthorizedClientProvider)
					.build();

	DefaultOAuth2AuthorizedClientManager authorizedClientManager =
			new DefaultOAuth2AuthorizedClientManager(
					clientRegistrationRepository, authorizedClientRepository);
	authorizedClientManager.setAuthorizedClientProvider(authorizedClientProvider);

	return authorizedClientManager;
}

@Bean
fun authorizedClientManager(
        clientRegistrationRepository: ClientRegistrationRepository,
        authorizedClientRepository: OAuth2AuthorizedClientRepository): OAuth2AuthorizedClientManager {
    val jwtBearerAuthorizedClientProvider = JwtBearerOAuth2AuthorizedClientProvider()
    val authorizedClientProvider = OAuth2AuthorizedClientProviderBuilder.builder()
            .provider(jwtBearerAuthorizedClientProvider)
            .build()
    val authorizedClientManager = DefaultOAuth2AuthorizedClientManager(
            clientRegistrationRepository, authorizedClientRepository)
    authorizedClientManager.setAuthorizedClientProvider(authorizedClientProvider)
    return authorizedClientManager
}

You may obtain the OAuth2AccessToken as follows:

Java
Kotlin

@RestController
public class OAuth2ResourceServerController {

	@Autowired
	private OAuth2AuthorizedClientManager authorizedClientManager;

	@GetMapping("/resource")
	public String resource(JwtAuthenticationToken jwtAuthentication) {
		OAuth2AuthorizeRequest authorizeRequest = OAuth2AuthorizeRequest.withClientRegistrationId("okta")
				.principal(jwtAuthentication)
				.build();
		OAuth2AuthorizedClient authorizedClient = this.authorizedClientManager.authorize(authorizeRequest);
		OAuth2AccessToken accessToken = authorizedClient.getAccessToken();

		// ...

	}
}

class OAuth2ResourceServerController {

    @Autowired
    private lateinit var authorizedClientManager: OAuth2AuthorizedClientManager

    @GetMapping("/resource")
    fun resource(jwtAuthentication: JwtAuthenticationToken?): String {
        val authorizeRequest: OAuth2AuthorizeRequest = OAuth2AuthorizeRequest.withClientRegistrationId("okta")
                .principal(jwtAuthentication)
                .build()
        val authorizedClient = authorizedClientManager.authorize(authorizeRequest)
        val accessToken: OAuth2AccessToken = authorizedClient.accessToken

        // ...

    }
}

JwtBearerOAuth2AuthorizedClientProvider resolves the Jwt assertion via OAuth2AuthorizationContext.getPrincipal().getPrincipal() by default, hence the use of JwtAuthenticationToken in the preceding example.

If you need to resolve the Jwt assertion from a different source, you can provide JwtBearerOAuth2AuthorizedClientProvider.setJwtAssertionResolver() with a custom Function<OAuth2AuthorizationContext, Jwt>.

Token Exchange

Please refer to OAuth 2.0 Token Exchange for further details on the Token Exchange grant.

Requesting an Access Token

Please refer to the Token Exchange Request and Response protocol flow for the Token Exchange grant.

The default implementation of OAuth2AccessTokenResponseClient for the Token Exchange grant is RestClientTokenExchangeTokenResponseClient, which uses a RestClient instance to obtain an access token at the Authorization Server’s Token Endpoint.

RestClientTokenExchangeTokenResponseClient is very flexible and provides several options for customizing the OAuth 2.0 Access Token request and response for the Token Exchange grant. Choose from the following use cases to learn more:

I want to customize headers of the Access Token request
I want to customize parameters of the Access Token request
I want to customize the instance of RestClient that is used
I want to customize parameters of the Access Token response
I want to customize error handling of the Access Token response

Customizing the Access Token Request

RestClientTokenExchangeTokenResponseClient provides hooks for customizing HTTP headers and request parameters of the OAuth 2.0 Access Token Request.

Customizing Request Headers

There are two options for customizing HTTP headers:

Add additional headers by calling addHeadersConverter()
Fully customize headers by calling setHeadersConverter()

Include Additional HTTP Headers

Java
Kotlin

RestClientTokenExchangeTokenResponseClient accessTokenResponseClient =
	new RestClientTokenExchangeTokenResponseClient();
accessTokenResponseClient.addHeadersConverter(grantRequest -> {
	ClientRegistration clientRegistration = grantRequest.getClientRegistration();
	HttpHeaders headers = new HttpHeaders();
	if (clientRegistration.getRegistrationId().equals("spring")) {
		headers.set(HttpHeaders.USER_AGENT, "my-user-agent");
	}
	return headers;
});

val accessTokenResponseClient = RestClientTokenExchangeTokenResponseClient()
accessTokenResponseClient.addHeadersConverter { grantRequest ->
	val clientRegistration = grantRequest.getClientRegistration()
	val headers = HttpHeaders()
	if (clientRegistration.getRegistrationId() == "spring") {
        headers[HttpHeaders.USER_AGENT] = "my-user-agent"
	}
	headers
}

Customize HTTP Headers

Java
Kotlin

DefaultOAuth2TokenRequestHeadersConverter headersConverter =
	new DefaultOAuth2TokenRequestHeadersConverter();
headersConverter.setEncodeClientCredentials(false);

RestClientTokenExchangeTokenResponseClient accessTokenResponseClient =
	new RestClientTokenExchangeTokenResponseClient();
accessTokenResponseClient.setHeadersConverter(headersConverter);

val headersConverter = DefaultOAuth2TokenRequestHeadersConverter()
headersConverter.setEncodeClientCredentials(false)

val accessTokenResponseClient = RestClientTokenExchangeTokenResponseClient()
accessTokenResponseClient.setHeadersConverter(headersConverter)

Customizing Request Parameters

There are three options for customizing request parameters:

Add additional parameters by calling addParametersConverter()
Override parameters by calling setParametersConverter()
Fully customize parameters by calling setParametersCustomizer()

Include Additional Request Parameters

Java
Kotlin

RestClientTokenExchangeTokenResponseClient accessTokenResponseClient =
	new RestClientTokenExchangeTokenResponseClient();
accessTokenResponseClient.addParametersConverter(grantRequest -> {
	ClientRegistration clientRegistration = grantRequest.getClientRegistration();
	MultiValueMap<String, String> parameters = new LinkedMultiValueMap<String, String>();
	if (clientRegistration.getRegistrationId().equals("keycloak")) {
		parameters.set(OAuth2ParameterNames.AUDIENCE, "my-audience");
	}
	return parameters;
});

val accessTokenResponseClient = RestClientTokenExchangeTokenResponseClient()
accessTokenResponseClient.addParametersConverter { grantRequest ->
	val clientRegistration = grantRequest.getClientRegistration()
	val parameters = LinkedMultiValueMap<String, String>()
	if (clientRegistration.getRegistrationId() == "keycloak") {
        parameters[OAuth2ParameterNames.AUDIENCE] = "my-audience"
	}
	parameters
}

You can override default parameters using setParametersConverter(). The following example overrides the client_id parameter when the registrationId is okta:

Override Request Parameters

Java
Kotlin

RestClientTokenExchangeTokenResponseClient accessTokenResponseClient =
	new RestClientTokenExchangeTokenResponseClient();
accessTokenResponseClient.setParametersConverter(grantRequest -> {
	ClientRegistration clientRegistration = grantRequest.getClientRegistration();
	LinkedMultiValueMap<String, String> parameters = new LinkedMultiValueMap<>();
	if (clientRegistration.getRegistrationId().equals("okta")) {
		parameters.set(OAuth2ParameterNames.CLIENT_ID, "my-client");
	}
	return parameters;
});

val parametersConverter = DefaultOAuth2TokenRequestParametersConverter<TokenExchangeGrantRequest>()
parametersConverter.setParametersCustomizer { parameters ->
	if (parameters.containsKey(OAuth2ParameterNames.CLIENT_ASSERTION)) {
		parameters.remove(OAuth2ParameterNames.CLIENT_ID)
	}
}

val accessTokenResponseClient = RestClientTokenExchangeTokenResponseClient()
accessTokenResponseClient.setParametersConverter { grantRequest ->
    val clientRegistration = grantRequest.getClientRegistration()
	val parameters = LinkedMultiValueMap<String, String>()
	if (clientRegistration.getRegistrationId() == "okta") {
        parameters[OAuth2ParameterNames.CLIENT_ID] = "my-client"
	}
	parameters
}

Omit Request Parameters

Java
Kotlin

RestClientTokenExchangeTokenResponseClient accessTokenResponseClient =
	new RestClientTokenExchangeTokenResponseClient();
accessTokenResponseClient.setParametersCustomizer(parameters -> {
	if (parameters.containsKey(OAuth2ParameterNames.CLIENT_ASSERTION)) {
		parameters.remove(OAuth2ParameterNames.CLIENT_ID);
	}
});

val accessTokenResponseClient = RestClientTokenExchangeTokenResponseClient()
accessTokenResponseClient.setParametersCustomizer { parameters ->
	if (parameters.containsKey(OAuth2ParameterNames.CLIENT_ASSERTION)) {
		parameters.remove(OAuth2ParameterNames.CLIENT_ID)
	}
}

Customizing the Access Token Response

RestClientTokenExchangeTokenResponseClient provides hooks for customizing response parameters and error handling of the OAuth 2.0 Access Token Response.

Customizing the `RestClient`

You can customize the Token Response by providing a pre-configured RestClient to setRestClient(). The default RestClient is configured as follows:

Default RestClient Configuration

Java
Kotlin

RestClient restClient = RestClient.builder()
	.messageConverters(messageConverters -> {
		messageConverters.clear();
		messageConverters.add(new FormHttpMessageConverter());
		messageConverters.add(new OAuth2AccessTokenResponseHttpMessageConverter());
	})
	.defaultStatusHandler(new OAuth2ErrorResponseErrorHandler())
	.build();

RestClientTokenExchangeTokenResponseClient accessTokenResponseClient =
	new RestClientTokenExchangeTokenResponseClient();
accessTokenResponseClient.setRestClient(restClient);

val restClient = RestClient.builder()
	.messageConverters { messageConverters ->
		messageConverters.clear()
		messageConverters.add(FormHttpMessageConverter())
		messageConverters.add(OAuth2AccessTokenResponseHttpMessageConverter())
	}
	.defaultStatusHandler(OAuth2ErrorResponseErrorHandler())
	.build()

val accessTokenResponseClient = RestClientTokenExchangeTokenResponseClient()
accessTokenResponseClient.setRestClient(restClient)

Spring MVC FormHttpMessageConverter is required, as it is used when sending the OAuth 2.0 Access Token Request.

Customizing Response Parameters

The following example provides a starting point for customizing the conversion of Token Response parameters to an OAuth2AccessTokenResponse:

Customize Access Token Response Converter

Java
Kotlin

OAuth2AccessTokenResponseHttpMessageConverter accessTokenResponseMessageConverter =
	new OAuth2AccessTokenResponseHttpMessageConverter();
accessTokenResponseMessageConverter.setAccessTokenResponseConverter(parameters -> {
	// ...
	return OAuth2AccessTokenResponse.withToken("custom-token")
		// ...
		.build();
});

val accessTokenResponseMessageConverter = OAuth2AccessTokenResponseHttpMessageConverter()
accessTokenResponseMessageConverter.setAccessTokenResponseConverter { parameters ->
	// ...
	return OAuth2AccessTokenResponse.withToken("custom-token")
		// ...
		.build()
}

Customizing Error Handling

The following example provides a starting point for customizing the conversion of Error parameters to an OAuth2Error:

Customize Access Token Error Handler

Java
Kotlin

OAuth2ErrorHttpMessageConverter errorConverter =
	new OAuth2ErrorHttpMessageConverter();
errorConverter.setErrorConverter(parameters -> {
	// ...
	return new OAuth2Error("custom-error", "custom description", "custom-uri");
});

OAuth2ErrorResponseErrorHandler errorHandler =
	new OAuth2ErrorResponseErrorHandler();
errorHandler.setErrorConverter(errorConverter);

val errorConverter = OAuth2ErrorHttpMessageConverter()
errorConverter.setErrorConverter { parameters ->
	// ...
	return OAuth2Error("custom-error", "custom description", "custom-uri")
}

val errorHandler = OAuth2ErrorResponseErrorHandler()
errorHandler.setErrorConverter(errorConverter)

Customize using the Builder

Whether you customize RestClientTokenExchangeTokenResponseClient or provide your own implementation of OAuth2AccessTokenResponseClient, you can configure it using the OAuth2AuthorizedClientProviderBuilder (as an alternative to publishing a bean) as follows:

Access Token Response Configuration via Builder

Java
Kotlin

// Customize
OAuth2AccessTokenResponseClient<TokenExchangeGrantRequest> tokenExchangeTokenResponseClient = ...

TokenExchangeOAuth2AuthorizedClientProvider tokenExchangeAuthorizedClientProvider = new TokenExchangeOAuth2AuthorizedClientProvider();
tokenExchangeAuthorizedClientProvider.setAccessTokenResponseClient(tokenExchangeTokenResponseClient);

OAuth2AuthorizedClientProvider authorizedClientProvider =
		OAuth2AuthorizedClientProviderBuilder.builder()
				.provider(tokenExchangeAuthorizedClientProvider)
				.build();

// ...

authorizedClientManager.setAuthorizedClientProvider(authorizedClientProvider);

// Customize
val tokenExchangeTokenResponseClient: OAuth2AccessTokenResponseClient<TokenExchangeGrantRequest> = ...

val tokenExchangeAuthorizedClientProvider = TokenExchangeOAuth2AuthorizedClientProvider()
tokenExchangeAuthorizedClientProvider.setAccessTokenResponseClient(tokenExchangeTokenResponseClient)

val authorizedClientProvider = OAuth2AuthorizedClientProviderBuilder.builder()
        .provider(tokenExchangeAuthorizedClientProvider)
        .build()

// ...

authorizedClientManager.setAuthorizedClientProvider(authorizedClientProvider)

Using the Access Token

Given the following Spring Boot properties for an OAuth 2.0 Client registration:

spring:
  security:
    oauth2:
      client:
        registration:
          okta:
            client-id: okta-client-id
            client-secret: okta-client-secret
            authorization-grant-type: urn:ietf:params:oauth:grant-type:token-exchange
            scope: read
        provider:
          okta:
            token-uri: https://dev-1234.oktapreview.com/oauth2/v1/token

…and the OAuth2AuthorizedClientManager @Bean:

Java
Kotlin

@Bean
public OAuth2AuthorizedClientManager authorizedClientManager(
		ClientRegistrationRepository clientRegistrationRepository,
		OAuth2AuthorizedClientRepository authorizedClientRepository) {

	TokenExchangeOAuth2AuthorizedClientProvider tokenExchangeAuthorizedClientProvider =
			new TokenExchangeOAuth2AuthorizedClientProvider();

	OAuth2AuthorizedClientProvider authorizedClientProvider =
			OAuth2AuthorizedClientProviderBuilder.builder()
					.provider(tokenExchangeAuthorizedClientProvider)
					.build();

	DefaultOAuth2AuthorizedClientManager authorizedClientManager =
			new DefaultOAuth2AuthorizedClientManager(
					clientRegistrationRepository, authorizedClientRepository);
	authorizedClientManager.setAuthorizedClientProvider(authorizedClientProvider);

	return authorizedClientManager;
}

@Bean
fun authorizedClientManager(
        clientRegistrationRepository: ClientRegistrationRepository,
        authorizedClientRepository: OAuth2AuthorizedClientRepository): OAuth2AuthorizedClientManager {
    val tokenExchangeAuthorizedClientProvider = TokenExchangeOAuth2AuthorizedClientProvider()
    val authorizedClientProvider = OAuth2AuthorizedClientProviderBuilder.builder()
            .provider(tokenExchangeAuthorizedClientProvider)
            .build()
    val authorizedClientManager = DefaultOAuth2AuthorizedClientManager(
            clientRegistrationRepository, authorizedClientRepository)
    authorizedClientManager.setAuthorizedClientProvider(authorizedClientProvider)
    return authorizedClientManager
}

You may obtain the OAuth2AccessToken as follows:

Java
Kotlin

@RestController
public class OAuth2ResourceServerController {

	@Autowired
	private OAuth2AuthorizedClientManager authorizedClientManager;

	@GetMapping("/resource")
	public String resource(JwtAuthenticationToken jwtAuthentication) {
		OAuth2AuthorizeRequest authorizeRequest = OAuth2AuthorizeRequest.withClientRegistrationId("okta")
				.principal(jwtAuthentication)
				.build();
		OAuth2AuthorizedClient authorizedClient = this.authorizedClientManager.authorize(authorizeRequest);
		OAuth2AccessToken accessToken = authorizedClient.getAccessToken();

		// ...

	}
}

class OAuth2ResourceServerController {

    @Autowired
    private lateinit var authorizedClientManager: OAuth2AuthorizedClientManager

    @GetMapping("/resource")
    fun resource(jwtAuthentication: JwtAuthenticationToken?): String {
        val authorizeRequest: OAuth2AuthorizeRequest = OAuth2AuthorizeRequest.withClientRegistrationId("okta")
                .principal(jwtAuthentication)
                .build()
        val authorizedClient = authorizedClientManager.authorize(authorizeRequest)
        val accessToken: OAuth2AccessToken = authorizedClient.accessToken

        // ...

    }
}

TokenExchangeOAuth2AuthorizedClientProvider resolves the subject token (as an OAuth2Token) via OAuth2AuthorizationContext.getPrincipal().getPrincipal() by default, hence the use of JwtAuthenticationToken in the preceding example. An actor token is not resolved by default.

If you need to resolve the subject token from a different source, you can provide TokenExchangeOAuth2AuthorizedClientProvider.setSubjectTokenResolver() with a custom Function<OAuth2AuthorizationContext, OAuth2Token>.

If you need to resolve an actor token, you can provide TokenExchangeOAuth2AuthorizedClientProvider.setActorTokenResolver() with a custom Function<OAuth2AuthorizationContext, OAuth2Token>.

Authorization Grant Support

Authorization Code

Obtaining Authorization

Initiating the Authorization Request

Customizing the Authorization Request

Storing the Authorization Request

Requesting an Access Token

Customizing the Access Token Request

Customizing Request Headers

Customizing Request Parameters

Customizing the Access Token Response

Customizing the RestClient

Customizing Response Parameters

Customizing Error Handling

Customize using the DSL

Refresh Token

Refreshing an Access Token

Customizing the Access Token Request

Customizing Request Headers

Customizing Request Parameters

Customizing the Access Token Response

Customizing the RestClient

Customizing Response Parameters

Customizing Error Handling

Customize using the Builder

Client Credentials

Requesting an Access Token

Customizing the Access Token Request

Customizing Request Headers

Customizing Request Parameters

Customizing the Access Token Response

Customizing the RestClient

Customizing Response Parameters

Customizing Error Handling

Customize using the Builder

Using the Access Token

JWT Bearer

Requesting an Access Token

Customizing the Access Token Request

Customizing Request Headers

Customizing Request Parameters

Customizing the Access Token Response

Customizing the RestClient

Customizing Response Parameters

Customizing Error Handling

Customize using the Builder

Using the Access Token

Token Exchange

Requesting an Access Token

Customizing the Access Token Request

Customizing Request Headers

Customizing Request Parameters

Customizing the Access Token Response

Customizing the RestClient

Customizing Response Parameters

Customizing Error Handling

Customize using the Builder

Using the Access Token

Customizing the `RestClient`

Customizing the `RestClient`

Customizing the `RestClient`

Customizing the `RestClient`

Customizing the `RestClient`